From 630868057802e2ad20ee7021f56ec742b1dde34f Mon Sep 17 00:00:00 2001 From: Patrick Zysset Date: Tue, 28 May 2019 20:18:54 +0200 Subject: [PATCH] README: remove deprecated documentation Please check netmodule-linux.readthedocs.io instead. Signed-off-by: Patrick Zysset --- README | 127 +-------------------------------------------------------- 1 file changed, 2 insertions(+), 125 deletions(-) diff --git a/README b/README index 8b901df..8893659 100644 --- a/README +++ b/README @@ -1,134 +1,11 @@ This layer depends on: URI: git://git.yoctoproject.org/poky -branch: jethro +branch: warrior revision: HEAD URI: git://git.openembedded.org/meta-openembedded -branch: jethro +branch: warrior revision: HEAD layers: meta-python, meta-oe, meta-networking -To get an image that is compatible with the NetModule router, build an nmrouter-image. Set the MACHINE in conf/local.conf to -MACHINE = "armada-385-nbhw17" (NB2800), -MACHINE = "armada-385-nbhw14" (NB3800/NB3711/NB3701) or -MACHINE = "am335x-nrhw16" # Internal name for NB800 family -and add the following layers to conf/bblayers.conf: -BBLAYERS ?= " \ - /meta \ - /meta-yocto \ - /meta-nmrouter \ - /meta-openembedded/meta-python \ - /meta-openembedded/meta-oe \ - /meta-openembedded/meta-networking \ - " - -NB2800: - While the NetModule router is running under the original software you have to do the following steps: - - Find out what boot partition is currently used: - cat /proc/cmdline - - The partition layout is mmcblk0p1 => bootpart0, mmcblk0p2 => bootpart1, mmcblk0p3=> overlay/data partition, mmcblk0p4 => user storage - - Untar the output of the nmrouter-image build to the partition that is not in use (if the above cmd returns mmcblk0p1 then to mmcblk0p2) - mount /dev/mmcblk0p2 /mnt - rm -rf /mnt/* - tar -xjf ./.tar.bz2 -C /mnt - - reboot the netmodule router - - in u-boot you have to manually overwrite the bootcmd. Use the correct boot partition (bootpart0 => 0:1, bootpart1 => 0:2) - setenv bootcmd 'ext4load mmc 0:2 $kernel_addr /boot/zImage && ext4load mmc 0:2 $fdt_addr /boot/armada-385-nbhw17-nb2800.dtb && setenv bootargs root=/dev/mmcblk0p2 rw rootfstype=ext4 console=ttyS0,115200 rootwait && bootz $kernel_addr - $fdt_addr' - saveenv # save the environment in eeprom (ignore message during bootup) - - boot to Linux: - boot - - Do not overwrite the original partition, u-boot will search a valid FPGA there. If you want to overwrite the other partition, make sure you copy the /logic folder from the original partition to the new one! - - To learn how to build an image and to find the build dependencies visit: - http://www.yoctoproject.org/docs/2.0/ref-manual/ref-manual.html - - Memory Map of the FPGA (to switch SIMs, reset modems): - Address Width Name/Comment - 0x0020 16 LED - LED Control Register - Slice Name Type Reset Description - 0 LED0 green RW 1 Enable LED 0 (green) - 1 LED0 red RW 1 Enable LED 0 (red) - 2 LED1 green RW 0 Enable LED 1 (green) - 3 LED1 red RW 0 Enable LED 1 (red) - 4 LED2 green RW 0 Enable LED 2 (green) - 5 LED2 red RW 0 Enable LED 2 (red) - 6 LED3 green RW 0 Enable LED 3 (green) - 7 LED3 red RW 0 Enable LED 3 (red) - 8 LED4 green RW 0 Enable LED 4 (green) - 9 LED4 red RW 0 Enable LED 4 (red) - 10 LED5 green RW 0 Enable LED 5 (green) - 11 LED5 red RW 0 Enable LED 5 (red) - 12 LED6 green RW 0 Enable LED 6 (green) - 13 LED6 red RW 0 Enable LED 6 (red) - 14 LED7 green RW 0 Enable LED 7 (green) - 15 LED7 red RW 0 Enable LED 7 (red) - - SIM Card Control - Address Width Name/Comment - 0x0040 16 SIM Ctrl - SIM Slot Control Register - Slice Name Type Reset Description - 2..0 SIM1_SEL RW 0 000: disconnect - 001: Connect Bus 1 - 010: Connect Bus 2 - 011: Connect Bus 3 - 100: Connect Bus 4 - Note: If no SIM Card is inserted, the power is disable of the corresponding slot. - 3 N/A R 0 Reserved - 6..4 SIM2_SEL RW 0 000: disconnect - 001: Connect Bus 1 - 010: Connect Bus 2 - 011: Connect Bus 3 - 100: Connect Bus 4 - Note: If no SIM Card is inserted, the power is disabled of the corresponding slot. - 7 N/A R 0 Reserved - 10..8 SIM3_SEL RW 0 000: disconnect - 001: Connect Bus 1 - 010: Connect Bus 2 - 011: Connect Bus 3 - 100: Connect Bus 4 - Note: If no SIM Card is inserted, the power is disable of the corresponding slot. - 11 N/A R 0 Reserved - 14..12 SIM4_SE RW 0 000: disconnect - 001: Connect Bus 1 - 010: Connect Bus 2 - 011: Connect Bus 3 - 100: Connect Bus 4 - Note: If no SIM Card is inserted, the power is disabled of the corresponding slot. - 15 N/A R 0 Reserved - - - PCIe Mini Slot Control: - Address Width Name/Comment - 0x0030 16 PCIe Reset - PCIe Slot Reset - Slice Name Type Reset Description - 0 PCIe1 RST~ RW 0 PCIe Slot 1 Reset - 0: reset asserted - 1 PCIe2 RST~ RW 0 PCIe Slot 2 Reset - 0: reset asserted - 2 PCIe3 RST~ RW 0 PCIe Slot 3 Reset - 0: reset asserted - 3 PCIe4 RST~ RW 0 PCIe Slot 4 Reset - 0: reset asserted - 4..15 n/a R 0 - - The FPGA Base address is at 0xfd000000, to enable for example LED0:red write 0x2 to 0xfd000020: - devmem2 0xfd000020 hw 0x02 - -NB800: -Coming from NetModule Software: - - Use the same steps as for NB2800 to install a custom rootfs - - You don't need to modify the u-boot environment, the NB800 automatically tries to load the correct dtb and the kernel /boot/zImage - - There is no FPGA available necessary for the NB800 - -Coming from an older Yocto image: - - To update the software you can do a sw-update.sh -l - - To read and write to the board descriptor use bd read/read-all/write - - To connect configure the modem and network interface use mmcli and nmcli (ModemManager and NetworkManager) - -For questions, send an email to -