diff --git a/recipes-bsp/lm_sensors/lmsensors/0001-libsensors-Fix-support-for-driver-names-with-dashes.patch b/recipes-bsp/lm_sensors/lmsensors/0001-libsensors-Fix-support-for-driver-names-with-dashes.patch
new file mode 100644
index 0000000..e67b543
--- /dev/null
+++ b/recipes-bsp/lm_sensors/lmsensors/0001-libsensors-Fix-support-for-driver-names-with-dashes.patch
@@ -0,0 +1,138 @@
+From 0992bce0612852dd10006a8e182b4e69361c99dc Mon Sep 17 00:00:00 2001
+From: Alexandre Bard <alexandre.bard@netmodule.com>
+Date: Fri, 12 Aug 2022 14:32:09 +0200
+Subject: [PATCH] libsensors: Fix support for driver names with dashes
+
+The dash is used as delimiter in the conversion rules. This works fine
+with kernel drivers with simple names like lm75, but some drivers have a
+compound name like da9063-hwmon which were not handled properly by these
+rules.
+
+Signed-off-by: Alexandre Bard <alexandre.bard@netmodule.com>
+---
+ lib/data.c | 102 +++++++++++++++++++++++++++++++++--------------------
+ 1 file changed, 64 insertions(+), 38 deletions(-)
+
+diff --git a/lib/data.c b/lib/data.c
+index c5aea429..318a35f8 100644
+--- a/lib/data.c
++++ b/lib/data.c
+@@ -83,54 +83,80 @@ void sensors_free_chip_name(sensors_chip_name *chip)
+ int sensors_parse_chip_name(const char *name, sensors_chip_name *res)
+ {
+ 	char *dash;
++	const char * prefix = name;
++	const char * bus_type;
+ 
+ 	/* First, the prefix. It's either "*" or a real chip name. */
+-	if (!strncmp(name, "*-", 2)) {
+-		res->prefix = SENSORS_CHIP_NAME_PREFIX_ANY;
+-		name += 2;
++	if (!strncmp(prefix, "*-", 2)) {
++		bus_type = prefix + 2;
+ 	} else {
+-		if (!(dash = strchr(name, '-')))
++		if (!(dash = strchr(prefix, '-')))
+ 			return -SENSORS_ERR_CHIP_NAME;
+-		res->prefix = strndup(name, dash - name);
+-		if (!res->prefix)
+-			sensors_fatal_error(__func__,
+-					    "Allocating name prefix");
+-		name = dash + 1;
++		bus_type = dash + 1;
+ 	}
+ 
+-	/* Then we have either a sole "*" (all chips with this name) or a bus
+-	   type and an address. */
+-	if (!strcmp(name, "*")) {
+-		res->bus.type = SENSORS_BUS_TYPE_ANY;
+-		res->bus.nr = SENSORS_BUS_NR_ANY;
+-		res->addr = SENSORS_CHIP_NAME_ADDR_ANY;
+-		return 0;
++	/* We go through the name until we find a valid bus type or "*"
++	   (all chips with this name). Dashes on the way are considered
++	   part of the prefix. */
++	while (1) {
++		if (!strcmp(bus_type, "*")) {
++			res->bus.type = SENSORS_BUS_TYPE_ANY;
++			break;
++		}
++
++		if (!(dash = strchr(bus_type, '-')))
++			return -SENSORS_ERR_CHIP_NAME;
++
++		if (!strncmp(bus_type, "i2c", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_I2C;
++			break;
++		}
++		else if (!strncmp(bus_type, "isa", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_ISA;
++			break;
++		}
++		else if (!strncmp(bus_type, "pci", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_PCI;
++			break;
++		}
++		else if (!strncmp(bus_type, "spi", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_SPI;
++			break;
++		}
++		else if (!strncmp(bus_type, "virtual", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_VIRTUAL;
++			break;
++		}
++		else if (!strncmp(bus_type, "acpi", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_ACPI;
++			break;
++		}
++		else if (!strncmp(bus_type, "hid", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_HID;
++			break;
++		}
++		else if (!strncmp(bus_type, "mdio", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_MDIO;
++			break;
++		}
++		else if (!strncmp(bus_type, "scsi", dash - bus_type)) {
++			res->bus.type = SENSORS_BUS_TYPE_SCSI;
++			break;
++		}
++		else {
++			/* Assume the prefix contains a dash */
++			bus_type = dash + 1;
++		}
+ 	}
+ 
+-	if (!(dash = strchr(name, '-')))
+-		goto ERROR;
+-	if (!strncmp(name, "i2c", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_I2C;
+-	else if (!strncmp(name, "isa", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_ISA;
+-	else if (!strncmp(name, "pci", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_PCI;
+-	else if (!strncmp(name, "spi", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_SPI;
+-	else if (!strncmp(name, "virtual", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_VIRTUAL;
+-	else if (!strncmp(name, "acpi", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_ACPI;
+-	else if (!strncmp(name, "hid", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_HID;
+-	else if (!strncmp(name, "mdio", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_MDIO;
+-	else if (!strncmp(name, "scsi", dash - name))
+-		res->bus.type = SENSORS_BUS_TYPE_SCSI;
+-	else
+-		goto ERROR;
+ 	name = dash + 1;
+ 
++	/* We can now properly set the prefix */
++	res->prefix = strndup(prefix, bus_type - prefix - 1);
++	if (!res->prefix)
++		sensors_fatal_error(__func__,
++				    "Allocating name prefix");
++
+ 	/* Some bus types (i2c, spi) have an additional bus number.
+ 	   For these, the next part is either a "*" (any bus of that type)
+ 	   or a decimal number. */
diff --git a/recipes-bsp/lm_sensors/lmsensors_3.6.0.bbappend b/recipes-bsp/lm_sensors/lmsensors_3.6.0.bbappend
new file mode 100644
index 0000000..08ddb17
--- /dev/null
+++ b/recipes-bsp/lm_sensors/lmsensors_3.6.0.bbappend
@@ -0,0 +1,6 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += "file://0001-libsensors-Fix-support-for-driver-names-with-dashes.patch"
+
+PACKAGECONFIG = ""
+