u-boot-hw23: Set empty initial environment

The default behavior is to try to build u-boot-initial-env
Which is not implemented in our u-boot repo.

Part of yocto update to dunfell release.

BugzID: 69636

classes/kernel-fitimage-fpga.bbclass

@@ -1,3 +1,5 @@
+inherit kernel
+
 do_assemble_fitimage[depends] += "fpga-image:do_deploy"
 
 #
@@ -6,12 +8,12 @@ do_assemble_fitimage[depends] += "fpga-image:do_deploy"
 # $1 ... .its filename
 # $2 ... Image counter
 # $3 ... Path to fpga image
-fitimage_emit_section_kernel_append() {
-        fpgacount=1
-        cat << EOF >> ${1}
-                fpga@${fpgacount} {
+fitimage_emit_section_fpga() {
+
+	cat << EOF >> ${1}
+                fpga@${2} {
                         description = "FPGA";
-                        data = /incbin/("${DEPLOY_DIR_IMAGE}/fpga-image-${MACHINE}");
+                        data = /incbin/("${3}");
                         type = "fpga";
                         arch = "${UBOOT_ARCH}";
                         compression = "none";
@@ -21,3 +23,128 @@ fitimage_emit_section_kernel_append() {
                 };
 EOF
 }
+
+
+#
+# Assemble fitImage
+#
+# $1 ... .its filename
+# $2 ... fitImage name
+# $3 ... include ramdisk
+fitimage_assemble() {
+	kernelcount=1
+	fpgacount=1
+	dtbcount=""
+	DTBS=""
+	ramdiskcount=${3}
+	setupcount=""
+	rm -f ${1} arch/${ARCH}/boot/${2}
+
+	fitimage_emit_fit_header ${1}
+
+	#
+	# Step 1: Prepare a kernel image section.
+	#
+	fitimage_emit_section_maint ${1} imagestart
+
+	uboot_prep_kimage
+	fitimage_emit_section_kernel ${1} "${kernelcount}" linux.bin "${linux_comp}"
+
+	#
+	# Step 1.5: Prepare a fpga image section.
+	#
+	fitimage_emit_section_fpga ${1} "${fpgacount}" "${DEPLOY_DIR_IMAGE}/fpga-image-${MACHINE}"
+
+	#
+	# Step 2: Prepare a DTB image section
+	#
+	if [ -n "${KERNEL_DEVICETREE}" ]; then
+		dtbcount=1
+		for DTB in ${KERNEL_DEVICETREE}; do
+			if echo ${DTB} | grep -q '/dts/'; then
+				bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used."
+				DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'`
+			fi
+			DTB_PATH="arch/${ARCH}/boot/dts/${DTB}"
+			if [ ! -e "${DTB_PATH}" ]; then
+				DTB_PATH="arch/${ARCH}/boot/${DTB}"
+			fi
+
+			DTB=$(echo "${DTB}" | tr '/' '_')
+			DTBS="${DTBS} ${DTB}"
+			fitimage_emit_section_dtb ${1} ${DTB} ${DTB_PATH}
+		done
+	fi
+
+	#
+	# Step 3: Prepare a setup section. (For x86)
+	#
+	if [ -e arch/${ARCH}/boot/setup.bin ]; then
+		setupcount=1
+		fitimage_emit_section_setup ${1} "${setupcount}" arch/${ARCH}/boot/setup.bin
+	fi
+
+	#
+	# Step 4: Prepare a ramdisk section.
+	#
+	if [ "x${ramdiskcount}" = "x1" ] ; then
+		# Find and use the first initramfs image archive type we find
+		for img in cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.gz ext2.gz cpio; do
+			initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE_NAME}.${img}"
+			echo "Using $initramfs_path"
+			if [ -e "${initramfs_path}" ]; then
+				fitimage_emit_section_ramdisk ${1} "${ramdiskcount}" "${initramfs_path}"
+				break
+			fi
+		done
+	fi
+
+	fitimage_emit_section_maint ${1} sectend
+
+	# Force the first Kernel and DTB in the default config
+	kernelcount=1
+	if [ -n "${dtbcount}" ]; then
+		dtbcount=1
+	fi
+
+	#
+	# Step 5: Prepare a configurations section
+	#
+	fitimage_emit_section_maint ${1} confstart
+
+	if [ -n "${DTBS}" ]; then
+		i=1
+		for DTB in ${DTBS}; do
+			dtb_ext=${DTB##*.}
+			if [ "${dtb_ext}" = "dtbo" ]; then
+				fitimage_emit_section_config ${1} "" "${DTB}" "" "" "`expr ${i} = ${dtbcount}`"
+			else
+				fitimage_emit_section_config ${1} "${kernelcount}" "${DTB}" "${ramdiskcount}" "${setupcount}" "`expr ${i} = ${dtbcount}`"
+			fi
+			i=`expr ${i} + 1`
+		done
+	fi
+
+	fitimage_emit_section_maint ${1} sectend
+
+	fitimage_emit_section_maint ${1} fitend
+
+	#
+	# Step 6: Assemble the image
+	#
+	uboot-mkimage \
+		${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
+		-f ${1} \
+		arch/${ARCH}/boot/${2}
+
+	#
+	# Step 7: Sign the image and add public key to U-Boot dtb
+	#
+	if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then
+		uboot-mkimage \
+			${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \
+			-F -k "${UBOOT_SIGN_KEYDIR}" \
+			${@'-K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}"' if len('${UBOOT_DTB_BINARY}') else ''} \
+			-r arch/${ARCH}/boot/${2}
+	fi
+}

conf/machine/am335x-hw25.conf

@@ -3,10 +3,11 @@
 #@DESCRIPTION: Machine configuration for the netmodule hw25, aka TC Router
 
 require am335x-nmhw24.conf
+MACHINEOVERRIDES .= ":am335x-nmhw24"
 
-UBOOT_MACHINE = "am335x_hw25_defconfig"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am335x-hw25"
 
-KERNEL_DEVICETREE_TO_USE = "${HW25_DT}"
+KERNEL_DEVICETREE = "am335x-hw25.dtb "
 
 SERIAL_CONSOLES = "115200;ttyS0"
 DEFAULT_ETH = "lan0"

conf/machine/am335x-hw26-vcupro.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: NetModule HW 26 with user module
-#@DESCRIPTION: NG800 (hw26) was based on VCU1 (hw21), but later on,
-# the new VCU pro was based on the changes done on NG800
-
-require am335x-hw26.conf
-MACHINEOVERRIDES =. "am335x-hw26:"
-
-USER_MODULE_MACHINE_FEATURE = "user-module"

conf/machine/am335x-hw26.conf

@@ -4,10 +4,5 @@
 
 #require conf/machine/include/ti33x.inc
 require am335x-nmhw21.conf
-KERNEL_DEVICETREE_TO_USE = "${HW26_DT}"
-MACHINEOVERRIDES =. "am335x-nmhw21:"
-
-MACHINE_FEATURES += "pps"
-
-# Remove usermodule
-USER_MODULE_MACHINE_FEATURE = ""
+KERNEL_DEVICETREE = "am335x-hw26.dtb "
+MACHINEOVERRIDES .= ":am335x-nmhw21"

conf/machine/am335x-nmhw21.conf

@@ -6,10 +6,13 @@ require conf/machine/include/ti33x.inc
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-KERNEL_DEVICETREE_TO_USE = "${HW21_DT}"
+KERNEL_DEFCONFIG ??= "am335x-nmhw21_defconfig"
+KERNEL_DEVICETREE = "am335x-nmhw21-prod1.dtb \
+    "
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti33x"
-UBOOT_MACHINE = "am335x_nmhw21_defconfig"
+KERNEL_IMAGETYPE = "fitImage"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am335x-nmhw21"
 
 USE_VT = "0"
 
@@ -19,20 +22,9 @@ WWAN_NBR = "1"
 WWAN_VENDORS = "ublox"
 
 MACHINE_FEATURES += " \
-	can \
-	spi \
-	imu \
-	gnss \
-	advanced-gnss \
 	wwan \
 	bluetooth \
 	tibluetooth \
 	neo-m8l \
-	wifi \
-	ti-wifi \
-	da9063-ignition \
 "
 
-USER_MODULE_MACHINE_FEATURE = "user-module"
-MACHINE_FEATURES_append = " ${USER_MODULE_MACHINE_FEATURE}"
-

conf/machine/am335x-nmhw24.conf

@@ -6,10 +6,13 @@ require conf/machine/include/ti33x.inc
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-KERNEL_DEVICETREE_TO_USE = "${HW24_DT}"
+KERNEL_DEFCONFIG ??= "am335x-nmhw24_defconfig"
+KERNEL_DEVICETREE = "am335x-nmhw24-prod1.dtb \
+    "
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti33x"
-UBOOT_MACHINE = "am335x_nrhw24_defconfig"
+KERNEL_IMAGETYPE = "fitImage"
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am335x-nmhw24"
 
 USE_VT = "0"
 
@@ -19,12 +22,9 @@ WWAN_NBR="1"
 WWAN_VENDORS = "ublox"
 
 MACHINE_FEATURES += " \
-	can \
 	wwan \
 	bluetooth \
 	tibluetooth \
 	atsha \
-	wifi \
-	ti-wifi \
 "
 

conf/machine/am335x-nrhw16.conf

@@ -6,22 +6,23 @@ require conf/machine/include/ti33x.inc
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-KERNEL_DEVICETREE_TO_USE = "${HW16_DT}"
+KERNEL_DEFCONFIG ??= "am335x-nrhw16_defconfig"
+KERNEL_DEVICETREE = "am335x-nrhw16.dtb \
+    am335x-nrhw16-prod2.dtb \
+    am335x-nrhw16-prod3.dtb \
+    am335x-nrhw16-prod4.dtb \
+    am335x-nrhw16-prod5.dtb \
+    "
+KERNEL_IMAGETYPE = "fitImage"
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti33x"
-UBOOT_MACHINE = "am335x_nbhw16_v2_defconfig"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am335x-nrhw16-v2"
 
 USE_VT = "0"
 
 SERIAL_CONSOLES ?= "115200;ttyS1"
 
 MACHINE_FEATURES += " \
-    can \
     bluetooth \
     tibluetooth \
     atsha \
-    am335x-wakeup-timer \
-    wifi \
-    ti-wifi \
-    ath-wifi \
-    "
+	"

conf/machine/am335x-nrhw20.conf

@@ -6,10 +6,12 @@ require conf/machine/include/ti33x.inc
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-KERNEL_DEVICETREE_TO_USE = "${HW20_DT}"
+KERNEL_DEFCONFIG ??= "am335x-nrhw20_defconfig"
+KERNEL_DEVICETREE = "am335x-nrhw20-prod1.dtb \
+    "
+KERNEL_IMAGETYPE = "fitImage"
 
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti33x"
-UBOOT_MACHINE = "am335x_nrhw20_defconfig"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-am335x-nrhw20-v1"
 
 USE_VT = "0"
 
@@ -19,13 +21,8 @@ WWAN_NBR = "1"
 WWAN_VENDORS = "ublox"
 
 MACHINE_FEATURES += " \
-    can \
     wwan \
-    gnss \
     bluetooth \
     tibluetooth \
     atsha \
-    wifi \
-    ti-wifi \
-    ath-wifi \
-    "
+	"

conf/machine/armada-385-hw17.conf

@@ -1,21 +0,0 @@
-#@TYPE: Machine
-#@NAME: HW17 based routers like NB2800
-#@DESCRIPTION: Machine configuration for the HW17 based routers http://netmodule.com/en/products/vehicle-routers/NB2800
-
-require conf/machine/include/armada.inc
-
-SERIAL_CONSOLE = "115200 ttyS1"
-MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
-
-UBOOT_MACHINE = "${MACHINE}_defconfig"
-IMAGE_BOOT_FILES = "u-boot-armada-385-hw17.kwb"
-
-KERNEL_DEVICETREE_TO_USE = "${HW17_DT}"
-PREFERRED_PROVIDER_virtual/kernel = "linux-netmodule"
-
-MACHINE_FEATURES += " \
-    fpga \
-    atsha \
-    wifi \
-    ath-wifi \
-    "

conf/machine/armada-385-nbhw17.conf

@@ -0,0 +1,18 @@
+#@TYPE: Machine
+#@NAME: NBHW17 based routers like NB2800
+#@DESCRIPTION: Machine configuration for the NBHW17 based routers http://netmodule.com/en/products/vehicle-routers/NB2800
+
+require conf/machine/include/armada.inc
+
+SERIAL_CONSOLE = "115200 ttyS1"
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
+
+KERNEL_DEFCONFIG ??= "nbhw_defconfig"
+KERNEL_DEVICETREE = "armada-385-nbhw17-prod1.dtb"
+KERNEL_IMAGETYPE = "zImage"
+
+PREFERRED_PROVIDER_virtual/kernel = "linux-netmodule"
+PV_pn-linux-netmodule = "4.12.0-${SRCPV}"
+SRC_URI_pn-linux-netmodule = "git://github.com/netmodule/linux.git;protocol=https;branch=4.12/standard/nrhw14"
+SRCREV_pn-linux-netmodule = "2fb3360ec3cf672c74321e1dbe5c04e59d1ced11"
+

conf/machine/armada-385-nrhw18.conf

@@ -7,19 +7,19 @@ require conf/machine/include/armada.inc
 SERIAL_CONSOLE = "115200 ttyS1"
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-KERNEL_DEVICETREE_TO_USE = "${HW18_DT}"
+KERNEL_DEFCONFIG ??= "armada-385-nrhw18_defconfig"
+KERNEL_DEVICETREE = "armada-385-nrhw18-prod1.dtb"
+KERNEL_IMAGETYPE = "fitImage"
 
 KERNEL_MODULE_PROBECONF += "ath10k_pci"
 module_conf_ath10k_pci = "options ath10k_pci irq_mode=1"
 
-UBOOT_MACHINE = "armada-385-hw18_defconfig"
-IMAGE_BOOT_FILES = "u-boot-armada-385-hw18.kwb"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-armada-385-nrhw18-v2"
+IMAGE_BOOT_FILES = "u-boot-armada-385-nrhw18-v2.kwb"
 
 DEFAULT_ETH = "eth2"
 
 MACHINE_FEATURES += " \
     fpga \
     atsha \
-    wifi \
-    ath-wifi \
-    "
+	"

conf/machine/imx8-mek.conf

@@ -17,6 +17,9 @@ SOTA_MACHINE = "${MACHINE}"
 KERNEL_CLASSES_append = " kernel-fitimage"
 
 KERNEL_IMAGETYPE = "Image"
+KERNEL_IMAGETYPES = "fitImage Image"
+KERNEL_IMAGETYPE_sota = "fitImage"
+KERNEL_IMAGETYPES_sota = "fitImage"
 UBOOT_ENTRYPOINT ?= "0x80020000"
 UBOOT_MACHINE = "imx8qxp_mek_defconfig"
 IMAGE_BOOT_FILES = "flash.bin"

conf/machine/imx8-nmhw23-dlm.conf

@@ -3,7 +3,7 @@
 #@DESCRIPTION: Machine configuration for the netmodule HW23, DLM variant
 
 require imx8-nmhw23.conf
-KERNEL_DEVICETREE_TO_USE = "${HW23_DLM_DT}"
+KERNEL_DEVICETREE = "netmodule/imx8-nmhw23-dlm.dtb"
 MACHINEOVERRIDES .= ":imx8-nmhw23"
 SOTA_MACHINE = "imx8-nmhw23"
 

conf/machine/imx8-nmhw23.conf

@@ -1,19 +1,31 @@
 #@TYPE: Machine
 #@NAME: NetModule HW 23
 #@DESCRIPTION: Machine configuration for the nmhw23 mainboard
-require include/imx8.inc
+
+require conf/machine/include/imx-base.inc
+# Prevent the use of imx mainline BSP
+IMX_DEFAULT_BSP = ""
+
+require conf/machine/include/tune-cortexa35.inc
+
+MACHINEOVERRIDES =. "mx8:mx8x:mx8qxp:"
 
 IMAGE_FSTYPES += "tar.gz cpio cpio.gz.u-boot"
 IMAGE_CLASSES += "image_types"
 
 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
 
-KERNEL_DEVICETREE_TO_USE = "${HW23_DT}"
+KERNEL_DEFCONFIG = "defconfig"
+KERNEL_DEVICETREE = "netmodule/imx8-nmhw23.dtb"
 
 SOTA_MACHINE = "${MACHINE}"
 
 KERNEL_CLASSES_append = " kernel-fitimage"
 
+KERNEL_IMAGETYPE = "fitImage"
+KERNEL_IMAGETYPE_aarch64 = "fitImage"
+KERNEL_ALT_IMAGETYPE = "Image"
+UBOOT_ENTRYPOINT = "0x80280000"
 #UBOOT_MACHINE = "imx8_nmhw23_defconfig"
 IMAGE_BOOT_FILES = "flash.bin"
 
@@ -31,28 +43,13 @@ WWAN_NBR = "1"
 WWAN_VENDORS = "ublox"
 
 MACHINE_FEATURES += " \
-	pci \
-	can \
-	spi \
-	imu \
-	gnss \
-	advanced-gnss \
 	wwan \
 	bluetooth \
 	neo-m8l \
-	usb-hub-reset \
 	v2x \
 	imx-boot \
-	wifi \
-	ublox-wifi \
-	da9063-ignition \
 "
 
 ACCEPT_FSL_EULA = "1"
 
 UBLOX_FEATURES = "jody-w1-pcie"
-
-# Unstable versions are provided by meta-netmodule-wlan
-# We prefer to keep the official stable versions
-PREFERRED_VERSION_wpa-supplicant = "2.9"
-PREFERRED_VERSION_hostapd = "2.9"

conf/machine/include/armada.inc

@@ -1,13 +1,14 @@
 SOC_FAMILY = "armada"
 require conf/machine/include/soc-family.inc
-require netmodule-hardware.inc
 
 DEFAULTTUNE ?= "cortexa9thf-neon"
 require conf/machine/include/tune-cortexa9.inc
 
 # Default providers, may need to override for specific machines
-PREFERRED_PROVIDER_virtual/bootloader = "u-boot-armada"
-PREFERRED_PROVIDER_u-boot = "u-boot-armada"
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+PREFERRED_PROVIDER_u-boot = "u-boot"
+
+KERNEL_IMAGETYPE = "zImage"
 
 UBOOT_ARCH = "arm"
 UBOOT_MACHINE = "mvebu_db_armada8k_config"
@@ -16,22 +17,10 @@ UBOOT_ENTRYPOINT = "0x13000000"
 UBOOT_LOADADDRESS = "0x13000000"
 
 # List common SoC features, may need to add touchscreen for specific machines
-MACHINE_FEATURES = "kernel26 usbgadget usbhost pci vfat ext2 ext4 ethernet"
+MACHINE_FEATURES = "kernel26 usbgadget usbhost vfat ext2 ext4 ethernet"
 
 SOTA_MACHINE = "armada-385"
 
 NM_TARGET = "netbolt"
 NM_ARCH = "arm"
 MACHINEOVERRIDES =. "${NM_TARGET}:"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-netmodule"
-PREFERRED_VERSION_linux-netmodule ?= "git-5.10"
-
-# We have one kernel for all armada machines
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_DEFCONFIG = "armada-385-netmodule_defconfig"
-
-HW17_DT = "armada-385-nbhw17-prod1.dtb"
-HW18_DT = "armada-385-nrhw18-prod1.dtb"
-
-KERNEL_DEVICETREE = "${HW17_DT} ${HW18_DT}"

conf/machine/include/imx8.inc

@@ -1,24 +0,0 @@
-require conf/machine/include/imx-base.inc
-require netmodule-hardware.inc
-
-# Prevent the use of imx mainline BSP
-IMX_DEFAULT_BSP = ""
-
-# Prevent usage of dynamic-packagearch for the kernel
-MACHINE_ARCH_FILTER = ""
-
-require conf/machine/include/tune-cortexa35.inc
-
-MACHINEOVERRIDES =. "mx8:mx8x:mx8qxp:"
-
-KERNEL_IMAGETYPE = "Image"
-KERNEL_ALT_IMAGETYPE = "Image"
-UBOOT_ENTRYPOINT = "0x80280000"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-netmodule"
-PREFERRED_VERSION_linux-netmodule ?= "git-4.14-nxp"
-KERNEL_DEFCONFIG = "imx8-netmodule_defconfig"
-
-HW23_DT = "netmodule/imx8-nmhw23.dtb"
-HW23_DLM_DT = "netmodule/imx8-nmhw23-dlm.dtb"
-KERNEL_DEVICETREE = "${HW23_DT} ${HW23_DLM_DT}"

conf/machine/include/netmodule-hardware.inc

@@ -1,2 +0,0 @@
-STAGING_KERNEL_DIR = "${TMPDIR}/work-shared/${TUNE_PKGARCH}/kernel-source"
-STAGING_KERNEL_BUILDDIR = "${TMPDIR}/work-shared/${TUNE_PKGARCH}/kernel-build-artifacts"

conf/machine/include/ti33x.inc

@@ -1,6 +1,5 @@
 SOC_FAMILY = "ti33x"
 require conf/machine/include/soc-family.inc
-require netmodule-hardware.inc
 
 DEFAULTTUNE ?= "cortexa8thf-neon"
 require conf/machine/include/tune-cortexa8.inc
@@ -21,8 +20,7 @@ GUI_MACHINE_CLASS = "bigscreen"
 MACHINE_KERNEL_PR = "r22"
 
 # Default providers, may need to override for specific machines
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-netmodule"
-PREFERRED_VERSION_linux-netmodule ?= "git-5.10"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-ti-staging"
 PREFERRED_PROVIDER_u-boot ?= "u-boot-ti-staging"
 
@@ -41,29 +39,9 @@ IMAGE_BOOT_FILES = "MLO u-boot.img"
 UBI_VOLNAME = "rootfs"
 
 # List common SoC features, may need to add touchscreen for specific machines
-MACHINE_FEATURES = "kernel26 apm usbgadget usbhost pci vfat ext2 screen alsa ethernet sgx"
+MACHINE_FEATURES = "kernel26 apm usbgadget usbhost vfat ext2 screen alsa ethernet sgx"
 
 
 NM_TARGET = "netbird"
 NM_ARCH = "arm"
 MACHINEOVERRIDES =. "${NM_TARGET}:"
-
-
-# We have one kernel for all TI machines
-KERNEL_IMAGETYPE = "zImage"
-KERNEL_DEFCONFIG = "am335x-netmodule_defconfig"
-
-# We need to specify all devicetrees here in order to build them with the kernel
-HW16_DT = "am335x-nrhw16.dtb \
-    am335x-nrhw16-prod2.dtb \
-    am335x-nrhw16-prod3.dtb \
-    am335x-nrhw16-prod4.dtb \
-    am335x-nrhw16-prod5.dtb \
-    "
-HW20_DT = "am335x-nrhw20-prod1.dtb"
-HW21_DT = "am335x-nmhw21-prod1.dtb"
-HW24_DT = "am335x-nmhw24-prod1.dtb"
-HW25_DT = "am335x-hw25.dtb"
-HW26_DT = "am335x-hw26.dtb"
-
-KERNEL_DEVICETREE = "${HW16_DT} ${HW20_DT} ${HW21_DT} ${HW24_DT} ${HW25_DT} ${HW26_DT}"

freescale/recipes-imx/imx-atf/imx-atf_1.5.0.bb

@@ -8,10 +8,10 @@ LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/BSD-3-Clause;m
 PV = "1.5.0+git${SRCPV}"
 
 SRCBRANCH = "imx_4.14.98_2.0.0_ga"
-SRC_URI = "git://github.com/nxp-imx/imx-atf.git;protocol=https;branch=${SRCBRANCH} \
+SRC_URI = "git://source.codeaurora.org/external/imx/imx-atf.git;protocol=https;branch=${SRCBRANCH} \
            file://0001-Allow-BUILD_STRING-to-be-set-in-.revision-file.patch \
 "
-SRCREV ?= "413e93e10ee4838e9a68b190f1468722f6385e0e"
+SRCREV ?= "${AUTOREV}"
 
 S = "${WORKDIR}/git"
 

freescale/recipes-imx/imx-mkimage/imx-mkimage_git.inc

@@ -4,8 +4,8 @@ DEPENDS = "zlib-native openssl-native"
 
 
 SRCBRANCH = "imx_4.14.98_2.0.0_ga"
-SRC_URI = "git://github.com/nxp-imx/imx-mkimage.git;protocol=https;branch=${SRCBRANCH}"
-SRCREV ?= "dd0234001713623c79be92b60fa88bc07b07f24f"
+SRC_URI = "git://source.codeaurora.org/external/imx/imx-mkimage.git;protocol=https;branch=${SRCBRANCH}"
+SRCREV ?= "${AUTOREV}"
 S = "${WORKDIR}/git"
 
 BOOT_TOOLS = "imx-boot-tools"

recipes-bsp/bootloader-config/bootloader-config.bb

@@ -14,7 +14,7 @@ PKGV = "${GITPKGVTAG}"
 PV = "1.0-git${SRCPV}"
 
 SRC_URI = "git://gitlab.com/netmodule/tools/bootloader-config.git;protocol=ssh;user=git;branch=master"
-SRCREV ?= "60269b7bbb4076247607c7a59b2134c3a5369f07"
+SRCREV ?= "${AUTOREV}"
 S = "${WORKDIR}/git"
 
 # Likely required in the future

recipes-bsp/fpga-image/fpga-image.bb

@@ -1,26 +1,28 @@
-DESCRIPTION = "Fpga images"
+DESCRIPTION = "Fpga image for NRHW18"
 LICENSE = "Proprietary"
 LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
 
 inherit deploy
 
-COMPATIBLE_MACHINE = "(armada-385-hw17|armada-385-nrhw18)"
-SRC_URI = "file://LG00000000"
+SRC_URI_armada-385-nrhw18 = "file://LG00000000"
 
-PACKAGE_ARCH = "${MACHINE_ARCH}"
+SRCREV = "${AUTOREV}"
 
 PV = "1.0.0"
 
 
-do_install () {
+do_install_armada-385-nrhw18 () {
     install -d ${D}/logic
     install -m 0644 ${WORKDIR}/LG00000000 ${D}/logic/
 }
 
-do_deploy () {
+do_deploy_armada-385-nrhw18 () {
     cp ${WORKDIR}/LG00000000 ${DEPLOYDIR}/fpga-image-${MACHINE}
 }
 
+do_deploy(){
+}
+
 FILES_${PN} += "/logic/LG00000000" 
 
-addtask deploy before do_build after do_compile
+addtask deploy before do_build after do_compile

recipes-bsp/lm_sensors/lmsensors-config/am335x-hw25/sensors.conf

@@ -1,7 +0,0 @@
-chip "da9063-*"
-	label in0 "main-voltage"
-	ignore in1
-	ignore in2
-	label in3 "wwan0-supply"
-	label in4 "rtc-voltage"
-	label temp1 "tjunc"

recipes-bsp/lm_sensors/lmsensors-config/am335x-hw26/sensors.conf

@@ -1,13 +0,0 @@
-chip "da9063-*"
-	label in0 "main-voltage"
-	label in1 "input-voltage"
-	compute in1 15.0*@, @/15.0
-	label in2 "ignition-voltage"
-	compute in2 4.96*@, @/4.96
-	ignore in3
-	label in4 "rtc-voltage"
-	label temp1 "tjunc"
-
-chip "*-mdio-*"
-	ignore in0
-	ignore temp1

recipes-bsp/lm_sensors/lmsensors-config/am335x-nmhw21

@@ -1 +0,0 @@
-am335x-hw26

recipes-bsp/lm_sensors/lmsensors-config/am335x-nmhw24/sensors.conf

@@ -1,9 +0,0 @@
-chip "da9063-*"
-	label in0 "main-voltage"
-	label in1 "input-voltage"
-	compute in1 15.0*@, @/15.0
-	label in2 "ignition-voltage"
-	compute in2 4.96*@, @/4.96
-	label in3 "wwan0-supply"
-	label in4 "rtc-voltage"
-	label temp1 "tjunc"

recipes-bsp/lm_sensors/lmsensors-config/am335x-nrhw20/sensors.conf

@@ -1,7 +0,0 @@
-chip "da9063-*"
-	label in0 "main-voltage"
-	ignore in1
-	ignore in2
-	ignore in3
-	label in4 "rtc-voltage"
-	label temp1 "tjunc"

recipes-bsp/lm_sensors/lmsensors-config_1.0.bbappend

@@ -1,4 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-PACKAGECONFIG = ""
-

recipes-bsp/mac-address-set/files/mac-address-set.service

@@ -1,11 +1,9 @@
 [Unit]
 After=tibluetooth.service
-After=jody-w1-bt-init.service
 
 [Service]
 Type=oneshot
-RemainAfterExit=yes
-ExecStart=/usr/bin/mac-address-set -b -l 1
+ExecStart=/usr/bin/mac-address-set
 
 [Install]
 WantedBy=multi-user.target

recipes-bsp/mac-address-set/files/mac-address-set.sh

@@ -1,378 +1,25 @@
 #!/usr/bin/env bash
 
-help_text='
-This script configures bluetooth and wifi mac addresses
-It is using the eth0 mac address as reference and then applying
-a logical operation based on the mac address range.
+eth_mac=$(ip addr show eth0 | awk '$1 == "link/ether" {gsub(/\/.*$/, "", $2); print $2}')
+wlan_mac=$(echo $eth_mac | sed -r "s/^(.{9})50(.{6})/\170\2/")
+bt_addr=$(echo $eth_mac | sed -r "s/^(.{9})50(.{6})/\180\2/")
 
-Since the handling of wifi and bluetooth devices may be different
-on different devices, this script is doing several attempts with
-different approaches to be compatible with all devices.
 
-Currently supported devices: HW21 and HW23
+# Set WLAN address
+ifconfig wlan0 | grep UP > /dev/null
+up=$?
+if [[ $up == 0 ]]; then
+	ifconfig wlan0 down
+fi
+ip link set wlan0 address $wlan_mac
 
-It currently supports two schemes:
-
-* VCU1 scheme, starts with 7C:97:63: and ends with:
-	eth0:  :50:XX:YY
-	wlan0: :70:XX:YY
-	bt0:   :80:XX:YY
-
-* VCU2 scheme, starts with 00:11:2B: and ends with:
-	eth0:  :XX:YY:ZZ
-	wlan0: :XX:YY:ZZ+3
-	bt0:   :XX:YY:ZZ+4
-
-This script is NOT setting eth0 mac address, this must be done
-before (usually bootloader).
-'
-
-level_error=0
-level_warning=1
-level_info=2
-level_test=3
-
-log_level="$level_info"
-
-eth_mac=0
-set_wlan=0
-set_bt=0
-invert_bt_mac=0
-
-log () {
-	msg_level="$1"
-	level_string="$2"
-	msg="$3"
-
-	if [ "$log_level" = "$level_test" ]; then
-		echo "$msg"
-	elif [ "$log_level" -ge "$msg_level" ]; then
-		echo "$0: $level_string: $msg"
-	fi
-}
-
-log_test() {
-	msg="$1"
-	log "$level_test" "test" "$msg"
-}
-
-log_info() {
-	msg="$1"
-	log "$level_info" "info" "$msg"
-}
-
-log_warning() {
-	msg="$1"
-	log "$level_warning" "warning" "$msg"
-}
-
-log_error() {
-	msg="$1"
-	log "$level_error" "error" "$msg"
-}
-
-wait_on() {
-	cmd=$1
-	device=$2
-	if $cmd "$device" > /dev/null 2>/dev/null; then
-		return
-	fi
-	log_info "$device not ready"
-	log_info "Waiting...."
-	wait_timeout=0
-	while ! $cmd "$device" > /dev/null 2>/dev/null; do
-		if [ $wait_timeout -gt 10 ]; then
-			log_warning "Timeout after 10 seconds, exiting now.."
-			break
-		else
-			sleep 1
-		fi
-		wait_timeout=$(($wait_timeout+1))
-	done
-	log_info "$device ready"
-}
-
-wait_on_wlan0() {
-	wait_on ifconfig wlan0
-}
-
-wait_on_hci0() {
-	wait_on hciconfig hci0
-}
-
-is_wlan0_up() {
-	if ifconfig wlan0 | grep UP > /dev/null;
-	then 
-		return "1"
-	else
-		return "0"
-	fi
-}
-
-set_wlan_mac_address() {
-	address=$1
-	log_info "Setting wlan0 mac address to $address"
-	ip link set wlan0 address "$address"
-	ret=$?
-	if [ $ret -ne 0 ]; then
-		log_warning "Setting wlan address failed $ret"
-	fi
-	return $ret
-}
-
-set_and_check_wlan_mac_address() {
-	address=$1
-
-	set_wlan_mac_address "$address"
-	ret=$?
-
-	if [ $ret -ne 0 ]; then
-		log_warning "Setting wlan address failed: $ret"
-		return $ret
-	fi
-
-	log_info "Checking success"
-	# Setting the mac may fail without error
-	# Checking MAC to be sure it worked
-	if ifconfig wlan0 | grep -i "$address" > /dev/null; then
-		log_info "wlan mac address successfully set"
-		return 0
-	else
-		log_warning "Setting wlan address failed without throwing an error"
-		return 1
-	fi
-}
-
-prepare_wlan() {
-	is_wlan0_up
-	wlan_iface_was_up=$?
-
-	if [[ "$wlan_iface_was_up" -eq "1" ]]; then
-		log_info "Taking wlan0 down"
-		ifconfig wlan0 down
-	fi
-	return "$wlan_iface_was_up"
-}
-
-unprepare_wlan() {
-	wlan_iface_was_up=$1
-
-	if [[ "$wlan_iface_was_up" -eq "1" ]]; then
-		log_info "Taking wlan0 back up"
-		ifconfig wlan0 up
-	else
-		log_info "Making sure wlan0 is down"
-		ifconfig wlan0 down
-	fi
-}
-
-prepare_and_set_wlan_mac_address() {
-	address="$1"
-
-	wait_on_wlan0
-	prepare_wlan
-	wlan_iface_was_up=$?
-
-	set_and_check_wlan_mac_address "$address"
-	ret=$?
-	if [[ "$ret" -ne 0 ]]; then
-		# On some devices the interface must be up to set the address
-		log_warning "Setting wlan address failed, trying with interface up"
-		ifconfig wlan0 up
-		set_and_check_wlan_mac_address "$address"
-		ret=$?
-	fi
-
-	unprepare_wlan "$wlan_iface_was_up"
-
-	return $ret
-}
-
-
-# Returns 1 in case reset failed
-# Returns 2 when the address is not correct after reset
-set_and_check_bt_mac_address() {
-	address="$1"
-	addr_to_set="$address" # Because of some bug the address to set may be inverted
-	if [[ "$invert_bt_mac" -eq "1" ]]; then
-		addr_to_set=$(echo "$address" | sed -r "s/^(.{2}):(.{2}):(.{2}):(.{2}):(.{2}):(.{2})/\\6:\\5:\\4:\\3:\\2:\\1/")
-	fi
-
-	bdaddr "$addr_to_set" > /dev/null
-	ret=$?
-	if [ $ret -ne 0 ]; then
-		log_warning "Setting bluetooth address failed: $ret"
-	fi
-
-	sleep 2
-	log_info "Restarting bluetooth service"
-	if ! hciconfig hci0 reset; then
-		return 1
-	fi
-
-	systemctl restart bluetooth
-	sleep 1
-	wait_on_hci0
-	hciconfig hci0 up
-
-	log_info "Checking success"
-	if hciconfig hci0 | grep -i "$address" > /dev/null; then
-		log_info "Bluetooth address successfully set"
-		ret=0
-	else
-		log_warning "Setting bluetooth address failed without error"
-		ret=2
-	fi
-	return $ret
-}
-
-prepare_and_set_bt_mac_address() {
-	address=$1
-
-	wait_on_hci0
-
-	hciconfig hci0 up
-
-	log_info "Setting bluetooth mac address to $address"
-	set_and_check_bt_mac_address "$address"
-	ret=$?
-
-	return $ret
-}
-
-do_bt_hard_reset() {
-	if systemctl is-active --quiet jody-w1-bt-init; then
-		systemctl restart jody-w1-bt-init
-	elif systemctl is-active --quiet tibluetooth; then
-		systemctl restart tibluetooth
-	else
-		log_error "No hard reset possible"
-		return 1
-	fi
-}
-
-# VCU1 scheme, starts with 7C:97:63:
-# eth0:  50:XX:YY
-# wlan0: 70:XX:YY
-# bt0:   80:XX:YY
-is_vcu1_mac() {
-	[[ ${1^^} == "7C:97:63:50:"* ]]
-}
-
-vcu1_eth_to_wlan() {
-	echo "${1^^}" | sed -r "s/^(.{9})50(.{6})/\\170\\2/"
-}
-
-vcu1_eth_to_bt() {
-	echo "${1^^}" | sed -r "s/^(.{9})50(.{6})/\\180\\2/"
-}
-
-# VCU2 scheme, starts with 00:11:2B:
-# eth0:  XX:YY:ZZ
-# wlan0: XX:YY:ZZ+3
-# bt0:   XX:YY:ZZ+4
-is_vcu2_mac() {
-	[[ $1 == "00:11:2B:"* ]]
-}
-
-vcu2_eth_to_wlan_and_bt() {
-	iface="$1"
-	IFS=':' read -r -a digits <<< "$2"
-
-	# convert digits from hex to decimal
-	for ((x=0 ; x<6 ; x++)); do digits[x]=0x${digits[x]}; done
-
-	if [ $iface = "wlan" ]; then
-		digits[5]=$((digits[5] + 3))
-	elif [ $iface = "bt" ]; then
-		digits[5]=$((digits[5] + 4))
-	fi
-
-	mac=$(printf ":%02X" "${digits[@]}")
-	mac=${mac:1} # Remove first ":"
-
-	echo "$mac"
-}
-
-main() {
-	ret=0
-
-	if [ "$1" = "-h" ]; then
-		echo "$help_text"
-		echo "Usage:"
-		echo "  $0"
-		echo "  $0 -l <loglevel> # loglevel being between 0 (errors) and 2 (info)"
-		echo "  $0 -w # set wifi address"
-		echo "  $0 -b # set bluetooth address"
-		echo "  $0 -i # invert bluetooth address"
-		echo "  $0 -e <eth0 addr> # mac address input, e.g. 00:11:22:33:44:10"
-		exit 0
-	fi
-
-	while getopts l:wbie: option
-	do 
-		case "${option}"
-		in
-			l)log_level=${OPTARG};;
-			w)set_wlan=1;;
-			b)set_bt=1;;
-			i)invert_bt_mac=1;;
-			e)eth_mac=${OPTARG};;
-		esac
-	done
-
-	if [ $eth_mac = 0 ]; then
-		eth_mac=$(ip addr show eth0 | awk '$1 == "link/ether" {gsub(/\/.*$/, "", $2); print $2}')
-	fi
-	eth_mac=${eth_mac^^} # UPPER case
-	if is_vcu1_mac "$eth_mac"; then
-		log_info "VCU1 mac address scheme"
-		wlan_mac=$(vcu1_eth_to_wlan "$eth_mac")
-		bt_addr=$(vcu1_eth_to_bt "$eth_mac")
-	elif is_vcu2_mac "$eth_mac"; then
-		log_info "VCU2 mac address scheme"
-		wlan_mac=$(vcu2_eth_to_wlan_and_bt "wlan" "$eth_mac")
-		bt_addr=$(vcu2_eth_to_wlan_and_bt "bt" "$eth_mac")
-	else
-		log_error "Unknown mac address scheme for: $eth_mac"
-		exit 1
-	fi
-
-	log_test "wlan: $wlan_mac"
-	log_test "bt: $bt_addr"
-
-	if [ $set_wlan = 1 ]; then
-		prepare_and_set_wlan_mac_address "$wlan_mac"
-		ret_wlan=$?
-		if [ $ret_wlan -ne 0 ]; then
-			log_error "Failed to set wlan mac address"
-			ret="$ret_wlan"
-		fi
-	fi
-
-	if [ $set_bt = 1 ]; then
-		prepare_and_set_bt_mac_address "$bt_addr"
-		ret_bt=$?
-
-		while [ $ret_bt -eq 1 ]; do
-			log_warning "Soft reset failed, doing hard reset and retrying"
-			do_bt_hard_reset
-			prepare_and_set_bt_mac_address "$bt_addr"
-			ret_bt=$?
-		done
-
-		if [ $ret_bt -ne 0 ]; then
-			log_error "Failed to set bluetooth mac address"
-			ret="$ret_bt"
-		fi
-	fi
-
-	return "$ret"
-}
-
-if [ "$1" = "testify" ]; then
-	return 0
+if [[ $up == 0 ]]; then
+        ifconfig wlan0 up
 fi
 
-main $@
-exit $?
+
+# Set BT address
+bt_addr_rev=$(echo $bt_addr | sed -r "s/^(.{2}):(.{2}):(.{2}):(.{2}):(.{2}):(.{2})/\6:\5:\4:\3:\2:\1/")
+bdaddr $bt_addr_rev
+hciconfig hci0 reset
+systemctl restart bluetooth

recipes-bsp/mac-address-set/files/wlan-address-set.service

@@ -1,12 +0,0 @@
-[Unit]
-Before=NetworkManager.service
-
-[Service]
-Type=oneshot
-RemainAfterExit=yes
-ExecStart=/usr/bin/mac-address-set -w -l 1
-
-[Install]
-WantedBy=multi-user.target
-
-

recipes-bsp/mac-address-set/mac-address-set.bb

@@ -9,8 +9,7 @@ PR = "r2"
 inherit systemd
 
 SRC_URI =  " \
-    file://wlan-address-set.service \
-    file://bt-address-set.service \
+    file://mac-address-set.service \
     file://mac-address-set.sh \
     "
 
@@ -18,7 +17,7 @@ S = "${WORKDIR}"
 
 INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
 
-SYSTEMD_SERVICE_${PN} = "wlan-address-set.service bt-address-set.service"
+SYSTEMD_SERVICE_${PN} = "mac-address-set.service"
 SYSTEMD_AUTO_ENABLE ?= "enable"
 
 FILES_${PN}_append = " \
@@ -26,17 +25,9 @@ FILES_${PN}_append = " \
                     /usr \
                     "
 
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
 do_install () {
     install -d ${D}${systemd_unitdir}/system/
-    install -m 0644 wlan-address-set.service ${D}${systemd_unitdir}/system/
-    install -m 0644 bt-address-set.service ${D}${systemd_unitdir}/system/
-
-    # Invert BT mac for TI chips
-    if ${@bb.utils.contains('MACHINE_FEATURES', 'tibluetooth', 'true', 'false',d)}; then
-        sed -i 's/^ExecStart=.*/& -i/g' ${D}${systemd_unitdir}/system/bt-address-set.service
-    fi
+    install -m 0644 mac-address-set.service ${D}${systemd_unitdir}/system/
 
     install -d ${D}/usr/bin
     install -m 0755 mac-address-set.sh ${D}/usr/bin/mac-address-set

recipes-bsp/mac-address-set/testify/README.md

@@ -1,48 +0,0 @@
-# bash-assert
-
-testify is a lightweight unit testing framework for bash
-
-# Usage
-
-clone this repository `git clone https://github.com/zombieleet/testify.git` here.
-
-run the mac-address-set-test.sh file and check the console output.
-
-# Commands
-
-all subcommands to the assert functions requres 4 arguments, the first argument is the actual value to test for, while the second argument 
-is the expected value, the thrid argument is a description of the test , while the fourth argument is a short description of what the test output should be
-
-**expect** Compares two values
-       
- 	`assert expect "$(Name 'Jane' 'Doe')" "John Doe" "Test for Name Function" "should fail"`
-	
-	To test the output of a function you have to use command substitution
-
-	You can also test single values
-
-	`assert expect "victory" "favour" "Test for Name comparison" "This should fail"`
-	
-	testing for mathematical expressions
-	
-	`assert expect "$((2+2))" "4" "Test for Simple Math Operation" "It should succeed"`
-	
-
-**regex** Does a regular expression match. The second argument to this subcommand should be a regular expression
-
-	`assert regex "What is the difference between 6 and half a dozen" "[[:digit:]]" "Match Number Regular Expression" "It should succeed"`
-
-
-**status** Test for any status code. The second argument should be the expected status code. The first argument to this subcommand should be a command name, and it should not be passed as a command substitution but it should be passed as just a string wrapped in double quotes.
-The arguments to the function should also be in the double quotes. Arguments with spaced should be wrapped in single quotes
-
-	`assert status "ls ." "0" "List in current dir" "it should return 0"`
-
-**done** This should be last subcommand to call, it does not require any argument
-
-
-# LICENSE
-
-GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or  (at your option) any later version.
-
-

recipes-bsp/mac-address-set/testify/mac-address-set-test.sh

@@ -1,51 +0,0 @@
-#!/usr/bin/env bash
-
-source ../files/mac-address-set.sh testify
-source ./testify/testify.bash
-
-assert expect "$(log_error 'test')" "$0: error: test" "Test for Error logging" "should succeed"
-assert expect "$(log_info 'test')" "$0: info: test" "Test for Info logging" "should succeed"
-
-# Testing VCU1 mac address converter
-assert expect "$(vcu1_eth_to_wlan '7C:97:63:50:00:00')" "7C:97:63:70:00:00" "Test VCU1 WLAN 1" "should match"
-assert expect "$(vcu1_eth_to_wlan '7c:97:63:50:00:00')" "7C:97:63:70:00:00" "Test VCU1 WLAN 2" "should match"
-
-assert expect "$(vcu1_eth_to_bt '7C:97:63:50:00:0A')" "7C:97:63:80:00:0A" "Test VCU1 BT 1" "should match"
-assert expect "$(vcu1_eth_to_bt '7c:97:63:50:00:0a')" "7C:97:63:80:00:0A" "Test VCU1 BT 2" "should match"
-
-# Testing VCU2 mac address converter
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:aa:cd:00')" "00:11:2B:AA:CD:03" "Test VCU2 WLAN 1" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2B:AA:CD:00')" "00:11:2B:AA:CD:03" "Test VCU2 WLAN 2" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:39')" "00:11:2B:00:00:3C" "Test VCU2 WLAN 3" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:f0')" "00:11:2B:00:00:F3" "Test VCU2 WLAN 4" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:f6')" "00:11:2B:00:00:F9" "Test VCU2 WLAN 5" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:f7')" "00:11:2B:00:00:FA" "Test VCU2 WLAN 6" "should match"
-#assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:RS')" "" "Test VCU2 WLAN 7" "should match"
-#assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:FF')" "" "Test VCU2 WLAN 8" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:06')" "00:11:2B:00:00:09" "Test VCU2 WLAN 9" "should match"
-
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2b:aa:cd:00')" "00:11:2B:AA:CD:04" "Test VCU2 BT 1" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2B:AA:CD:00')" "00:11:2B:AA:CD:04" "Test VCU2 BT 2" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2b:00:00:39')" "00:11:2B:00:00:3D" "Test VCU2 BT 3" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2b:00:00:f0')" "00:11:2B:00:00:F4" "Test VCU2 BT 4" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2b:00:00:f6')" "00:11:2B:00:00:FA" "Test VCU2 BT 5" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2b:00:00:f7')" "00:11:2B:00:00:FB" "Test VCU2 BT 6" "should match"
-#assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:RS')" "" "Test VCU2 BT 7" "should match"
-#assert expect "$(vcu2_eth_to_wlan_and_bt 'wlan' '00:11:2b:00:00:FF')" "" "Test VCU2 BT 8" "should match"
-assert expect "$(vcu2_eth_to_wlan_and_bt 'bt' '00:11:2b:00:00:06')" "00:11:2B:00:00:0A" "Test VCU2 BT 9" "should match"
-
-# Examples:
-#assert expect "$(Name 'Jane' 'Doe')" "John Doe" "Test for Name Function" "should fail"
-#assert expect "$(Name 'Jane' 'Doe')" "Jane Doe" "Test for Name Function" "should succeed"
-#assert status "Name" "5" "Test for status code" "should return 5"
-#assert status "Name 'Jane' 'Doe'" "0" "Test for Status Code" "should return 0"
-#assert status "Name 'Jane' " "3" "Test for Status Code" "should return 3"
-#assert status "Name 'Jane' 'Doe'" "12" "Test for Status Code" "it should fail"
-#assert regex "$(Name 'Jane' 'Doe')" "Jane" "Test for Regexp" "it should match"
-#assert regex "123victory" "\W" "Test for Regexp Non Word Character" "it should fail if match failes"
-#assert expect "$((2+2))" "4" "Test for Simple Math Operation" "It should succeed"
-#assert regex "What is the difference between 6 and half a dozen" "[[:digit:]]" "Match Number Regular Expression" "It should succeed"
-#assert status "ls ." "0" "List in current dir" "it should return 0"
-
-assert done
-

recipes-bsp/storage-info/storage-info.bb

@@ -1,38 +0,0 @@
-SUMMARY = "Storage Information Tool"
-SECTION = "base"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://LICENSE;md5=81438338854bd7a09cb97215f36db46b"
-
-SRC_URI = "git://gitlab.com/netmodule/tools/storage-info.git;protocol=ssh;user=git;branch=develop"
-SRCREV ?= "6584feb5fb3e18572fee1cea9e20a6b8e5cd0251"
-
-PV = "0.0.1+git${SRCPV}"
-
-
-DEPENDS_append = " libnmapp"
-
-inherit systemd
-
-S = "${WORKDIR}/git"
-B = "${S}/build"
-
-SYSTEMD_SERVICE_${PN} = "storage-info.service"
-
-FILES_${PN} += " \
-                  ${bindir}/storage-info \
-                  ${systemd_system_unitdir}/storage-info.service \
-                  ${sysconfdir}/storage/storage-info.conf \
-               "
-
-# build variables for the target (rest is default)
-EXTRA_OEMAKE_append = " 'BUILD_TARGET=target' 'BUILD_CONFIG=rls' 'SYSROOT=${STAGING_DIR_TARGET}'"
-
-do_install() {
-    install -d ${D}${bindir}
-    install -m 755 ${B}/rls/target/${BPN} ${D}${bindir}
-    install -d ${D}${sysconfdir}/storage
-    install -m 644 ${S}/config/${BPN}.conf ${D}${sysconfdir}/storage/
-    install -d ${D}${systemd_system_unitdir}
-    install -m 644 ${S}/systemd/${BPN}.service ${D}${systemd_system_unitdir}
-}
-

recipes-bsp/u-boot/u-boot-am335x-hw25_git.bb

@@ -0,0 +1,5 @@
+require u-boot-am335x-nmhw24_git.bb
+
+UBOOT_MACHINE = "am335x_hw25_defconfig"
+
+

recipes-bsp/u-boot/u-boot-am335x-nmhw21_git.bb

@@ -0,0 +1,32 @@
+require u-boot-nm.inc
+
+# Force machine configuration for this recipe
+UBOOT_MACHINE = "am335x_nmhw21_defconfig"
+
+# Be aware github/netmodule git
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot;protocol=ssh;user=gitea;branch=2016.05-am335x-netmodule"
+
+# Should be updated when a new U-Boot Version is available
+SRCREV ?= "${AUTOREV}"
+PV = "v2016.05+git${SRCPV}"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+do_deploy_append() {
+    rm -f ${DEPLOYDIR}/*${PN}.xmodem.bin
+    rm -f ${DEPLOYDIR}/*${PN}.${UBOOT_SUFFIX}
+    cp ${S}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-${PN}.xmodem.bin
+    cp ${S}/u-boot.bin ${DEPLOYDIR}/${PN}.xmodem.bin
+    cp ${S}/u-boot.img ${DEPLOYDIR}/${PN}.${UBOOT_SUFFIX}
+    cp ${S}/MLO ${DEPLOYDIR}/spl-${PN}.${UBOOT_SUFFIX}
+}
+
+# nmhw21 and hw26 using same u-boot sources so let's create symlinks for hw26 when building nmhw21
+PN_E = "u-boot-${MACHINE}"
+do_deploy_append_am335x-hw26() {
+    cp ${S}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-${PN_E}.xmodem.bin
+    cp ${S}/u-boot.bin ${DEPLOYDIR}/${PN_E}.xmodem.bin
+    cp ${S}/u-boot.img ${DEPLOYDIR}/${PN_E}.${UBOOT_SUFFIX}
+    cp ${S}/MLO ${DEPLOYDIR}/spl-${PN_E}.${UBOOT_SUFFIX}
+}

recipes-bsp/u-boot/u-boot-am335x-nmhw24_git.bb

@@ -0,0 +1,24 @@
+require u-boot-nm.inc
+
+# Force machine configuration for this recipe
+UBOOT_MACHINE = "am335x_nrhw24_defconfig"
+
+# Be aware github/netmodule git
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot;protocol=ssh;user=gitea;branch=2016.05-am335x-netmodule"
+
+# Should be updated when a new U-Boot Version is available
+SRCREV ?= "${AUTOREV}"
+PV = "v2016.05+git${SRCPV}"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+do_deploy_append() {
+    rm -f ${DEPLOYDIR}/*${PN}.xmodem.bin
+    rm -f ${DEPLOYDIR}/*${PN}.${UBOOT_SUFFIX}
+    cp ${S}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-${PN}.xmodem.bin
+    cp ${S}/u-boot.bin ${DEPLOYDIR}/${PN}.xmodem.bin
+    cp ${S}/u-boot.img ${DEPLOYDIR}/${PN}.${UBOOT_SUFFIX}
+    cp ${S}/MLO ${DEPLOYDIR}/spl-${PN}.${UBOOT_SUFFIX}
+}
+

recipes-bsp/u-boot/u-boot-am335x-nrhw16-common.inc

@@ -0,0 +1,21 @@
+require u-boot-nm.inc
+
+
+# Be aware github/netmodule git
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot;protocol=ssh;user=gitea;branch=2016.05-am335x-netmodule"
+
+# Should be updated when a new U-Boot Version is available
+PV = "v2016.05+git${SRCPV}"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+do_deploy_append() {
+    rm -f ${DEPLOYDIR}/*${PN}.xmodem.bin
+    rm -f ${DEPLOYDIR}/*${PN}.${UBOOT_SUFFIX}
+    cp ${S}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-${PN}.xmodem.bin
+    cp ${S}/u-boot.bin ${DEPLOYDIR}/${PN}.xmodem.bin
+    cp ${S}/u-boot.img ${DEPLOYDIR}/${PN}.${UBOOT_SUFFIX}
+    cp ${S}/MLO ${DEPLOYDIR}/spl-${PN}.${UBOOT_SUFFIX}
+}
+

recipes-bsp/u-boot/u-boot-am335x-nrhw16-v1_git.bb

@@ -0,0 +1,7 @@
+require u-boot-am335x-nrhw16-common.inc
+
+# Force machine configuration for this recipe
+UBOOT_MACHINE = "am335x_nbhw16_defconfig"
+
+# Should be updated when a new U-Boot Version is available
+SRCREV ?= "a6f157c6dbd048b452c7e2640215c55be658780c"

recipes-bsp/u-boot/u-boot-am335x-nrhw16-v2_git.bb

@@ -0,0 +1,7 @@
+require u-boot-am335x-nrhw16-common.inc
+
+# Force machine configuration for this recipe
+UBOOT_MACHINE = "am335x_nbhw16_v2_defconfig"
+
+SRCREV ?= "${AUTOREV}"
+

recipes-bsp/u-boot/u-boot-am335x-nrhw20-v1_git.bb

@@ -0,0 +1,24 @@
+require u-boot-nm.inc
+
+# Force machine configuration for this recipe
+UBOOT_MACHINE = "am335x_nrhw20_defconfig"
+
+# Be aware github/netmodule git
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot;protocol=ssh;user=gitea;branch=2016.05-am335x-netmodule"
+
+# Should be updated when a new U-Boot Version is available
+SRCREV ?= "${AUTOREV}"
+PV = "v2016.05+git${SRCPV}"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+do_deploy_append() {
+    rm -f ${DEPLOYDIR}/*${PN}.xmodem.bin
+    rm -f ${DEPLOYDIR}/*${PN}.${UBOOT_SUFFIX}
+    cp ${S}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-${PN}.xmodem.bin
+    cp ${S}/u-boot.bin ${DEPLOYDIR}/${PN}.xmodem.bin
+    cp ${S}/u-boot.img ${DEPLOYDIR}/${PN}.${UBOOT_SUFFIX}
+    cp ${S}/MLO ${DEPLOYDIR}/spl-${PN}.${UBOOT_SUFFIX}
+}
+

recipes-bsp/u-boot/u-boot-armada-385-nrhw18-v2_git.bb

@@ -0,0 +1,28 @@
+require u-boot-nm.inc
+
+# Force machine configuration for this recipe
+UBOOT_MACHINE = "armada-385-nrhw18-v2_defconfig"
+
+# Be aware github/netmodule git
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot;protocol=ssh;user=gitea;branch=2017.11-armada-nrhw"
+
+DEPENDS = "bc-native"
+
+# Should be updated when a new U-Boot Version is available
+#SRCREV ?= "f665946cc415e628b237fcf846bda1debf40980b"
+SRCREV = "${AUTOREV}"
+
+PV = "v2017.11+git${SRCPV}"
+
+UBOOT_SUFFIX = "kwb"
+UBOOT_BINARY = "u-boot-spl.${UBOOT_SUFFIX}"
+
+do_deploy_append() {
+    rm -f ${DEPLOYDIR}/${PN}-spl.bin
+    rm -f ${DEPLOYDIR}/${PN}.bin
+    rm -f ${DEPLOYDIR}/${PN}-spl.kwb
+    cp ${S}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-${PN}.xmodem.bin
+    cp ${S}/u-boot.bin ${DEPLOYDIR}/${PN}.xmodem.bin
+    cp ${S}/${UBOOT_BINARY} ${DEPLOYDIR}/${PN}.${UBOOT_SUFFIX}
+}
+

recipes-bsp/u-boot/u-boot-armada_git.bb

@@ -1,26 +0,0 @@
-require u-boot-nm.inc
-
-# Be aware github/netmodule git
-SRC_URI = "git://gitlab.com/netmodule/bootloader/netmodule-uboot.git;protocol=ssh;user=git;branch=2017.11/standard/armada-385"
-
-DEPENDS += "bc-native"
-
-# Should be updated when a new U-Boot Version is available
-#SRCREV ?= "68d28424cf41e141207d9d8af76c5bc5e01a55e2"
-SRCREV ?= "68d28424cf41e141207d9d8af76c5bc5e01a55e2"
-
-UBOOT_SUFFIX = "kwb"
-UBOOT_BINARY = "u-boot-spl.${UBOOT_SUFFIX}"
-
-do_deploy() {
-    # xmodem files
-    cp ${B}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-u-boot-${MACHINE}.xmodem.bin
-    cp ${B}/u-boot.bin ${DEPLOYDIR}/u-boot-${MACHINE}.xmodem.bin
-
-    # file for wic file
-    cp ${B}/${UBOOT_BINARY} ${DEPLOYDIR}/u-boot-spl.${UBOOT_SUFFIX}
-
-    # file for user usage
-    cp ${B}/${UBOOT_BINARY} ${DEPLOYDIR}/u-boot-${MACHINE}.${UBOOT_SUFFIX}
-}
-

recipes-bsp/u-boot/u-boot-imx8-nmhw23_git.bb

@@ -10,8 +10,8 @@ PROVIDES += "u-boot"
 LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 
-SRC_URI = "git://gitlab.com/netmodule/bootloader/netmodule-uboot.git;protocol=ssh;user=git;branch=2018.03/imx/imx8-nmhw23;destsuffix=git"
-SRCREV ?= "68ad3ed09773011ab15e9dd50f9ec2bbf817ef3f"
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot;protocol=ssh;user=gitea;branch=2018.03/imx/imx8-nmhw23;destsuffix=git"
+SRCREV ?= "${AUTOREV}"
 
 S = "${WORKDIR}/git"
 

recipes-bsp/u-boot/u-boot-nm.inc

@@ -1,13 +1,294 @@
-require recipes-bsp/u-boot/u-boot.inc
+SUMMARY = "Universal Boot Loader for embedded devices"
+HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
 
 LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
 
 S = "${WORKDIR}/git"
-B = "${WORKDIR}/build"
-do_configure[cleandirs] = "${B}"
-UBOOT_INITIAL_ENV = ""
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+PROVIDES = "virtual/bootloader"
+
+inherit uboot-config deploy
+
+PROVIDES = "virtual/bootloader"
+
+EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}" V=1'
+EXTRA_OEMAKE += 'HOSTCC="${BUILD_CC} ${BUILD_CFLAGS} ${BUILD_LDFLAGS}"'
+
+PACKAGECONFIG ??= "openssl"
+# u-boot will compile its own tools during the build, with specific
+# configurations (aka when CONFIG_FIT_SIGNATURE is enabled) openssl is needed as
+# a host build dependency.
+PACKAGECONFIG[openssl] = ",,openssl-native"
+
+# Allow setting an additional version string that will be picked up by the
+# u-boot build system and appended to the u-boot version.  If the .scmversion
+# file already exists it will not be overwritten.
+UBOOT_LOCALVERSION ?= ""
+
+# Some versions of u-boot use .bin and others use .img.  By default use .bin
+# but enable individual recipes to change this value.
+UBOOT_SUFFIX ??= "bin"
+UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
+UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
+UBOOT_SYMLINK ?= "${PN}.${UBOOT_SUFFIX}"
+UBOOT_MAKE_TARGET ?= "all"
+
+# Output the ELF generated. Some platforms can use the ELF file and directly
+# load it (JTAG booting, QEMU) additionally the ELF can be used for debugging
+# purposes.
+UBOOT_ELF ?= ""
+UBOOT_ELF_SUFFIX ?= "elf"
+UBOOT_ELF_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_ELF_SUFFIX}"
+UBOOT_ELF_BINARY ?= "u-boot.${UBOOT_ELF_SUFFIX}"
+UBOOT_ELF_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_ELF_SUFFIX}"
+
+# Some versions of u-boot build an SPL (Second Program Loader) image that
+# should be packaged along with the u-boot binary as well as placed in the
+# deploy directory.  For those versions they can set the following variables
+# to allow packaging the SPL.
+SPL_BINARY ?= ""
+SPL_IMAGE ?= "${SPL_BINARY}-${MACHINE}-${PV}-${PR}"
+SPL_SYMLINK ?= "${SPL_BINARY}-${PN}"
+
+# Additional environment variables or a script can be installed alongside
+# u-boot to be used automatically on boot.  This file, typically 'uEnv.txt'
+# or 'boot.scr', should be packaged along with u-boot as well as placed in the
+# deploy directory.  Machine configurations needing one of these files should
+# include it in the SRC_URI and set the UBOOT_ENV parameter.
+UBOOT_ENV_SUFFIX ?= "txt"
+UBOOT_ENV ?= ""
+UBOOT_ENV_BINARY ?= "${UBOOT_ENV}.${UBOOT_ENV_SUFFIX}"
+UBOOT_ENV_IMAGE ?= "${UBOOT_ENV}-${MACHINE}-${PV}-${PR}.${UBOOT_ENV_SUFFIX}"
+UBOOT_ENV_SYMLINK ?= "${UBOOT_ENV}-${MACHINE}.${UBOOT_ENV_SUFFIX}"
 
 # This variable is set to "0" in distro in order to get reproducible build
 # It is however not needed for uboot and unsetting it allows us to keep the build date in uboot output
 unset SOURCE_DATE_EPOCH
+
+do_compile () {
+    if [ "${@bb.utils.contains('DISTRO_FEATURES', 'ld-is-gold', 'ld-is-gold', '', d)}" = "ld-is-gold" ] ; then
+        sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' config.mk
+    fi
+
+    unset LDFLAGS
+    unset CFLAGS
+    unset CPPFLAGS
+
+    if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ]
+    then
+        echo ${UBOOT_LOCALVERSION} > ${B}/.scmversion
+        echo ${UBOOT_LOCALVERSION} > ${S}/.scmversion
+    fi
+
+    if [ "x${UBOOT_CONFIG}" != "x" ]
+    then
+        for config in ${UBOOT_MACHINE}; do
+            i=`expr $i + 1`;
+            for type  in ${UBOOT_CONFIG}; do
+                j=`expr $j + 1`;
+                if [ $j -eq $i ]
+                then
+                    oe_runmake O=${config} ${config}
+                    oe_runmake O=${config} ${UBOOT_MAKE_TARGET}
+                    cp  ${S}/${config}/${UBOOT_BINARY}  ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX}
+                fi
+            done
+            unset  j
+        done
+        unset  i
+    else
+        oe_runmake ${UBOOT_MACHINE}
+        oe_runmake ${UBOOT_MAKE_TARGET}
+    fi
+
+}
+
+do_install () {
+    if [ "x${UBOOT_CONFIG}" != "x" ]
+    then
+        for config in ${UBOOT_MACHINE}; do
+            i=`expr $i + 1`;
+            for type in ${UBOOT_CONFIG}; do
+                j=`expr $j + 1`;
+                if [ $j -eq $i ]
+                then
+                    install -d ${D}/boot
+                    install ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX} ${D}/boot/u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${D}/boot/${UBOOT_BINARY}-${type}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${D}/boot/${UBOOT_BINARY}
+                fi
+            done
+            unset  j
+        done
+        unset  i
+    else
+        install -d ${D}/boot
+        install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
+        ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
+    fi
+
+    if [ "x${UBOOT_ELF}" != "x" ]
+    then
+        if [ "x${UBOOT_CONFIG}" != "x" ]
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=`expr $i + 1`;
+                for type in ${UBOOT_CONFIG}; do
+                    j=`expr $j + 1`;
+                    if [ $j -eq $i ]
+                    then
+                        install ${S}/${config}/${UBOOT_ELF} ${D}/boot/u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${D}/boot/${UBOOT_BINARY}-${type}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${D}/boot/${UBOOT_BINARY}
+                    fi
+                done
+                unset j
+            done
+            unset i
+        else
+            install ${S}/${UBOOT_ELF} ${D}/boot/${UBOOT_ELF_IMAGE}
+            ln -sf ${UBOOT_ELF_IMAGE} ${D}/boot/${UBOOT_ELF_BINARY}
+        fi
+    fi
+
+    if [ -e ${WORKDIR}/fw_env.config ] ; then
+        install -d ${D}${sysconfdir}
+        install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
+    fi
+
+    if [ "x${SPL_BINARY}" != "x" ]
+    then
+        if [ "x${UBOOT_CONFIG}" != "x" ]   
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=`expr $i + 1`;
+                for type in ${UBOOT_CONFIG}; do
+                    j=`expr $j + 1`;
+                    if [ $j -eq $i ]
+                    then
+                         install ${S}/${config}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE}-${type}-${PV}-${PR}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${D}/boot/${SPL_BINARY}-${type}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${D}/boot/${SPL_BINARY}
+                    fi
+                done
+                unset  j
+            done
+            unset  i
+        else
+            install ${S}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE}
+            ln -sf ${SPL_IMAGE} ${D}/boot/${SPL_BINARY}
+        fi
+    fi
+
+    if [ "x${UBOOT_ENV}" != "x" ]
+    then
+        install ${WORKDIR}/${UBOOT_ENV_BINARY} ${D}/boot/${UBOOT_ENV_IMAGE}
+        ln -sf ${UBOOT_ENV_IMAGE} ${D}/boot/${UBOOT_ENV_BINARY}
+    fi
+}
+
+FILES_${PN} = "/boot ${sysconfdir}"
+# Ensure the split debug part of any elf files are put into dbg
+FILES_${PN}-dbg += "/boot/.debug"
+
+do_deploy () {
+    if [ "x${UBOOT_CONFIG}" != "x" ]
+    then
+        for config in ${UBOOT_MACHINE}; do
+            i=`expr $i + 1`;
+            for type in ${UBOOT_CONFIG}; do
+                j=`expr $j + 1`;
+                if [ $j -eq $i ]
+                then
+                    install -d ${DEPLOYDIR}
+                    install ${S}/${config}/u-boot-${type}.${UBOOT_SUFFIX} ${DEPLOYDIR}/u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX}
+                    cd ${DEPLOYDIR}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_SYMLINK}-${type}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_SYMLINK}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_BINARY}-${type}
+                    ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_SUFFIX} ${UBOOT_BINARY}
+                fi 
+            done 
+            unset  j
+        done
+        unset  i
+    else
+        install -d ${DEPLOYDIR}
+        install ${S}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
+        cd ${DEPLOYDIR}
+        rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK}
+        ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
+        ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY}
+   fi
+
+    if [ "x${UBOOT_ELF}" != "x" ]
+    then
+        if [ "x${UBOOT_CONFIG}" != "x" ]
+        then
+            for config in ${UBOOT_MACHINE}; do
+                i=`expr $i + 1`;
+                for type in ${UBOOT_CONFIG}; do
+                    j=`expr $j + 1`;
+                    if [ $j -eq $i ]
+                    then
+                        install ${S}/${config}/${UBOOT_ELF} ${DEPLOYDIR}/u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_BINARY}-${type}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_BINARY}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_SYMLINK}-${type}
+                        ln -sf u-boot-${type}-${PV}-${PR}.${UBOOT_ELF_SUFFIX} ${DEPLOYDIR}/${UBOOT_ELF_SYMLINK}
+                    fi
+                done
+                unset j
+            done
+            unset i
+        else
+            install ${S}/${UBOOT_ELF} ${DEPLOYDIR}/${UBOOT_ELF_IMAGE}
+            ln -sf ${UBOOT_ELF_IMAGE} ${DEPLOYDIR}/${UBOOT_ELF_BINARY}
+            ln -sf ${UBOOT_ELF_IMAGE} ${DEPLOYDIR}/${UBOOT_ELF_SYMLINK}
+        fi
+    fi
+
+
+     if [ "x${SPL_BINARY}" != "x" ]
+     then
+         if [ "x${UBOOT_CONFIG}" != "x" ]   
+         then
+             for config in ${UBOOT_MACHINE}; do
+                 i=`expr $i + 1`;
+                 for type in ${UBOOT_CONFIG}; do
+                     j=`expr $j + 1`;
+                     if [ $j -eq $i ]
+                     then
+                         install ${S}/${config}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}-${type}-${PV}-${PR}
+                         rm -f ${DEPLOYDIR}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_SYMLINK}-${type}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_BINARY}-${type}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_BINARY}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_SYMLINK}-${type}
+                         ln -sf ${SPL_IMAGE}-${type}-${PV}-${PR} ${DEPLOYDIR}/${SPL_SYMLINK}
+                     fi
+                 done
+                 unset  j
+             done
+             unset  i
+         else
+             install ${S}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}
+             rm -f ${DEPLOYDIR}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_SYMLINK}
+             ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_BINARY}
+             ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_SYMLINK}
+         fi
+     fi
+
+
+    if [ "x${UBOOT_ENV}" != "x" ]
+    then
+        install ${WORKDIR}/${UBOOT_ENV_BINARY} ${DEPLOYDIR}/${UBOOT_ENV_IMAGE}
+        rm -f ${DEPLOYDIR}/${UBOOT_ENV_BINARY} ${DEPLOYDIR}/${UBOOT_ENV_SYMLINK}
+        ln -sf ${UBOOT_ENV_IMAGE} ${DEPLOYDIR}/${UBOOT_ENV_BINARY}
+        ln -sf ${UBOOT_ENV_IMAGE} ${DEPLOYDIR}/${UBOOT_ENV_SYMLINK}
+    fi
+}
+
+addtask deploy before do_build after do_compile

recipes-bsp/u-boot/u-boot-ti33x_git.bb

@@ -1,24 +0,0 @@
-require u-boot-nm.inc
-
-# Be aware github/netmodule git
-SRC_URI = "git://gitlab.com/netmodule/bootloader/netmodule-uboot.git;protocol=ssh;user=git;branch=2016.05/standard/am335x"
-
-# Should be updated when a new U-Boot Version is available
-SRCREV = "69e9c386dd3734a01af79ca1cc565896facfb9f6"
-
-SPL_BINARY = "MLO"
-UBOOT_SUFFIX = "img"
-
-do_deploy() {
-    # xmodem files
-    cp ${B}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-u-boot-${MACHINE}.xmodem.bin
-    cp ${B}/u-boot.bin ${DEPLOYDIR}/u-boot-${MACHINE}.xmodem.bin
-
-    # files for wic file
-    cp ${B}/MLO ${DEPLOYDIR}/
-    cp ${B}/u-boot.img ${DEPLOYDIR}/
-
-    # files for user usage
-    cp ${B}/MLO ${DEPLOYDIR}/spl-u-boot-${MACHINE}.${UBOOT_SUFFIX}
-    cp ${B}/u-boot.img ${DEPLOYDIR}/u-boot-${MACHINE}.${UBOOT_SUFFIX}
-}

recipes-bsp/usb-hub-reset/files/usb-hub-reset

@@ -1,87 +0,0 @@
-#!/bin/sh
-
-# ************************************************************
-#  USB Hub Reset Script
-#  -----------------------
-#
-#  The USB hub in the HW23 connects the GNSS modem, the v2x-
-#  module, the user interface and the user module.
-#
-#  When HW23 device is powering up the v2x module enters DFU
-#  mode. This mode leads to enumeration errors when releasing
-#  the gnss module from reset. Thus a sequentialized startup
-#  is needed.
-#  This script just sets the USB hub either into reset mode or
-#  releases it from reset.
-# ************************************************************
-
-SCRIPT_NAME=$(basename "${0}")
-SCRIPT_DIR=$(dirname "${0}")
-SCRIPT_PATH=$(realpath "${SCRIPT_DIR}")
-MYDIR=$(pwd)
-
-HUB_RST=/sys/class/leds/hub_rst/brightness
-ON_VALUE=0
-OFF_VALUE=255
-
-export HUB_RST_STATE="off"
-
-
-#**********************************************************************************************
-# local helper functions
-#**********************************************************************************************
-function printUsage()
-{
-    echo -e "\\nUsage: ${SCRIPT_NAME} [OPTIONS] HUB_STATE\\n\\n"
-    echo -e "   HUB_STATE                    The requested state of the usb hub:"
-    echo -e "                                 * on = release hub from reset"
-    echo -e "                                 * off = set hub into reset state (default)"
-    echo -e "   OPTIONS:"
-    echo -e "     -h|--help                  Show this help"
-    echo -e ""
-}
-
-#**********************************************************************************************
-# main
-#**********************************************************************************************
-
-O=$(getopt -o h --long help -- "$@") || exit 1
-if [ $? != 0 ]; then
-    echo "ERROR: Could not parse $SCRIPT_NAME command line options"
-    exit 1
-fi
-
-eval set -- "$O"
-while true; do
-    case "${1}" in
-        -h|--help)
-            printUsage
-            exit 0
-            ;;
-        --)
-            export HUB_RST_STATE="${2}"
-            shift 2
-            break
-            ;;
-        *)
-            printUsage; exit 0 ;;
-    esac
-done
-
-
-if [ ! -f $HUB_RST ]; then
-    echo "ERROR $SCRIPT_NAME: USB hub reset lines not available"
-    return 1
-fi
-
-HUB_RST_VALUE=$OFF_VALUE
-[[ "${HUB_RST_STATE}" != "off" ]] && HUB_RST_VALUE=$ON_VALUE || true
-
-echo "$SCRIPT_NAME: set usb-hub=${HUB_RST_STATE}($HUB_RST_VALUE)..."
-echo $HUB_RST_VALUE > $HUB_RST
-if [[ "$?" != "0" ]]; then
-    echo "ERROR $SCRIPT_NAME: Could not set usb hub to ${HUB_RST_STATE}"
-    exit 1
-fi
-
-exit 0

recipes-bsp/usb-hub-reset/files/usb-hub-reset.service

@@ -1,14 +0,0 @@
-[Unit]
-Description=USB Hub Reset Service
-Before=gpsd.service
-
-[Service]
-Type=oneshot
-
-ExecStart=/usr/bin/usb-hub-reset on
-
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
-RequiredBy=multi-user.target

recipes-bsp/usb-hub-reset/usb-hub-reset.bb

@@ -1,29 +0,0 @@
-DESCRIPTION = "USB-Hub Reset on HW23"
-HOMEPAGE = "www.netmodule.com"
-LICENSE = "MIT"
-SECTION = "bsp"
-RDEPENDS_${PN} = "usbutils coreutils"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
-
-inherit systemd
-
-SRC_URI = " \
-           file://usb-hub-reset.service \
-           file://usb-hub-reset\
-          "
-
-S = "${WORKDIR}"
-
-SYSTEMD_SERVICE_${PN} = " \
-                          usb-hub-reset.service \
-                        "
-
-FILES_${PN} = "${systemd_unitdir}/system ${bindir}"
-
-do_install() {
-    install -d ${D}${systemd_unitdir}/system
-    install -m 644 ${WORKDIR}/usb-hub-reset.service ${D}${systemd_unitdir}/system/
-
-    install -d ${D}${bindir}
-    install -m 744 ${WORKDIR}/usb-hub-reset ${D}${bindir}
-}

recipes-bsp/v2x-ieee802.11p/files/v2x-fw-load

@@ -1,141 +0,0 @@
-#!/bin/sh
-
-SCRIPT_NAME=$(basename "${0}")
-
-V2X_CONF=/etc/v2x0.conf
-V2X_RST=/sys/class/leds/v2x_rst/brightness
-ON_VALUE=0
-#OFF_VALUE=255
-IS_PLACEHOLDER_FW=false
-
-#**********************************************************************************************
-# local helper functions
-#**********************************************************************************************
-printUsage()
-{
-    echo ""
-    echo "Usage: ${SCRIPT_NAME} [OPT] CMD"
-    echo ""
-    echo "   CMD:"
-    echo "     -h|--help                  Show this help"
-    echo ""
-    echo "   OPT:"
-    echo "     -c|--config-file=FILE      The config file pathname (default=${V2X_CONF})"
-    echo ""
-}
-
-checkInputParameters()
-{
-    if [ ! -f $V2X_RST ]; then
-        echo "ERROR $SCRIPT_NAME: v2x module reset lines not available"
-        exit 1
-    fi
-    if [ ! -f $V2X_CONF ]; then
-        echo "ERROR $SCRIPT_NAME: no v2x config file '${V2X_CONF}' found"
-        exit 1
-    fi
-}
-
-getConfigParameters()
-{
-    echo "$SCRIPT_NAME: getting config parameter from $V2X_CONF"
-    placeholderEntry=$(grep is-placeholder-firmware $V2X_CONF | cut -d'=' -f2)
-    if [ "${placeholderEntry}" != "" ] && [ "${placeholderEntry}" = "true" ]; then
-        IS_PLACEHOLDER_FW=true
-    fi
-}
-
-enableTheModule()
-{
-    pwrGpio="$(gpiofind UM_SUP_EN)"
-
-    echo "$SCRIPT_NAME: releasing v2x reset..."
-    echo $ON_VALUE > $V2X_RST
-
-    echo "$SCRIPT_NAME: toggling v2x module power..."
-    gpioset -m time -s 1 $pwrGpio=0
-    gpioset -m signal $pwrGpio=1 &
-}
-
-detectDfuMode()
-{
-    timeoutS=30
-
-    echo "$SCRIPT_NAME: discovering DFU mode of v2x module (timeout=${timeoutS}s)..."
-    timeout $timeoutS bash -c -- 'while true; do lsusb | grep "0483:df11"; if [ $? == 0  ]; then break; fi; done'
-    if [ $? = 124 ]; then
-        echo "ERROR: v2x module is not available on usb bus"
-        exit 1
-    fi
-}
-
-waitForDfuModeExit()
-{
-    disconnectTimeoutS=20
-    echo "$SCRIPT_NAME: wait for v2x module leaving DFU mode (timeout=${disconnectTimeoutS}s)..."
-    timeout $disconnectTimeoutS bash -c -- 'while true; do dmesg | grep "0483:df11"; if [ $? != 0 ]; then break; fi; done'
-    if [ $? = 124 ]; then
-        echo "$SCRIPT_NAME: no DFU mode exit of v2x module detected"
-    else
-        echo "$SCRIPT_NAME: v2x module exited DFU mode"
-    fi
-}
-
-loadFirmware()
-{
-    echo "$SCRIPT_NAME: loading v2x firmware..."
-    output=$(dfu-util -d 0483:df11 -s 0x10000000 -D /lib/firmware/v2x/SECTON.packed_bin.rom 2>&1)
-    if [ $? != 0 ]; then
-        if echo "$output" | grep -i "Error during abort get_status"; then
-            echo "$SCRIPT_NAME: get_status abort error: ignoring"
-            exit 0
-        fi
-        echo "$SCRIPT_NAME: Something went wrong while uploading firmware:"
-        echo "$output"
-        exit 1
-    fi
-}
-
-
-#**********************************************************************************************
-# main
-#**********************************************************************************************
-
-O=$(getopt -o hc: --long help,config-file: -- "$@") || exit 1
-
-eval set -- "$O"
-while true; do
-    case "${1}" in
-        -h|--help)
-            printUsage
-            exit 0
-            ;;
-        -c|--config-file)
-            V2X_CONF=${2}
-            shift 2
-            ;;
-        --)
-            break
-            ;;
-        *)
-            printUsage; exit 0 ;;
-    esac
-done
-
-checkInputParameters
-
-getConfigParameters
-
-enableTheModule
-
-detectDfuMode
-
-if [ $IS_PLACEHOLDER_FW = true ]; then
-    echo "$SCRIPT_NAME: v2x placeholder firmware configured"
-    waitForDfuModeExit
-    exit 0
-fi
-
-loadFirmware
-
-exit 0

recipes-bsp/v2x-ieee802.11p/files/v2x-ieee802.11p.service

@@ -1,12 +0,0 @@
-[Unit]
-Description=V2X Firmware loader
-After=usb-hub-reset.service
-
-[Service]
-Type=oneshot
-ExecStart=/usr/bin/v2x-fw-load
-RemainAfterExit=yes
-
-[Install]
-WantedBy=multi-user.target
-RequiredBy=multi-user.target

recipes-bsp/v2x-ieee802.11p/files/v2x0-placeholderFw.conf

@@ -1,2 +0,0 @@
-[default]
-is-placeholder-firmware=true

recipes-bsp/v2x-ieee802.11p/files/v2x0.conf

@@ -1 +0,0 @@
-[default]

recipes-bsp/v2x-ieee802.11p/v2x-ieee802.11p.bb

@@ -1,45 +0,0 @@
-# Copyright (C) 2019 Ramon Moesching <ramon.moesching@netmodule.com>
-# Released under the MIT license (see COPYING.MIT for the terms)
-
-DESCRIPTION = "Murata v2x module firmware loader service"
-HOMEPAGE = "www.netmodule.com"
-LICENSE = "MIT"
-SECTION = "bsp/firmware"
-RDEPENDS_${PN} = "dfu-util usbutils coreutils"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
-
-inherit systemd
-
-SRC_URI = " \ 
-           file://v2x-ieee802.11p.service \
-           file://v2x-fw-load \
-           file://v2x_dummy.rom \
-           file://v2x0.conf \
-           file://v2x0-placeholderFw.conf \
-          "
-
-S = "${WORKDIR}"
-
-SYSTEMD_SERVICE_${PN} = " \
-                          v2x-ieee802.11p.service \
-                        "
-
-FILES_${PN} = "${systemd_unitdir}/system ${bindir} ${nonarch_base_libdir}/firmware/v2x ${sysconfdir} "
-
-do_install() {
-    install -d ${D}${systemd_unitdir}/system
-    install -m 644 ${WORKDIR}/v2x-ieee802.11p.service ${D}${systemd_unitdir}/system/
-
-    install -d ${D}${nonarch_base_libdir}/firmware/v2x
-    install -m 644 ${WORKDIR}/v2x_dummy.rom ${D}${nonarch_base_libdir}/firmware/v2x/SECTON.packed_bin.rom
-
-    install -d ${D}${sysconfdir}
-    if [ ! -z "${V2X_ENABLE_FW_LOAD}" ]; then
-        install -m 544 ${WORKDIR}/v2x0.conf ${D}${sysconfdir}
-    else
-        install -m 544 ${WORKDIR}/v2x0-placeholderFw.conf ${D}${sysconfdir}/v2x0.conf
-    fi
-
-    install -d ${D}${bindir}
-    install -m 744 ${WORKDIR}/v2x-fw-load ${D}${bindir}
-}

recipes-connectivity/gnss-init/files/gnss-init.service

@@ -1,11 +1,14 @@
 [Unit]
 Description=GNSS init service
-After=usb-hub-reset.service v2x-ieee802.11p.service
+After=v2x-ieee802.11p.service
 
 [Service]
 Type=oneshot
 
-ExecStart=/usr/bin/sh -c  "echo 0 > /sys/class/leds/gnss_rst/brightness"
+ExecStartPre=/bin/sh -c "echo 0 > /sys/class/leds/gnss_rst/brightness"
+ExecStart=/usr/bin/echo start
+ExecStop=/usr/bin/echo stop 
+ExecStopPost=/bin/sh -c "echo 0 > /sys/class/leds/gnss_rst/brightness"
 
 RemainAfterExit=yes
 

recipes-connectivity/gnss-init/gnss-init.bb

@@ -26,4 +26,5 @@ FILES_${PN}_append = "${systemd_unitdir}/system ${bindir}"
 do_install_append() {
     install -d ${D}${systemd_unitdir}/system
     install -m 644 ${WORKDIR}/gnss-init.service ${D}${systemd_unitdir}/system/
+
 }

recipes-connectivity/gnss-mgr/gnss-mgr.bb

@@ -25,7 +25,7 @@ PV = "1.0-git${SRCPV}"
 PR = "r1"
 
 SRC_URI = "git://gitlab.com/netmodule/tools/gnssmgr.git;protocol=ssh;user=git;branch=master"
-SRCREV = "3d80bb4871ddc2e3e84553a86b767b419b96148f"
+SRCREV ?= "${AUTOREV}"
 S = "${WORKDIR}/git"
 
 PACKAGES =+ "${PN}-test"

recipes-connectivity/libqmi/libqmi_1.26.6.bb

@@ -1,21 +0,0 @@
-SUMMARY = "libqmi is a library for talking to WWAN devices by QMI protocol"
-DESCRIPTION = "libqmi is a glib-based library for talking to WWAN modems and \
-               devices which speak the Qualcomm MSM Interface (QMI) protocol"
-HOMEPAGE = "http://www.freedesktop.org/wiki/Software/libqmi"
-LICENSE = "GPLv2 & LGPLv2.1"
-LIC_FILES_CHKSUM = " \
-    file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
-    file://COPYING.LIB;md5=4fbd65380cdd255951079008b364516c \
-"
-
-DEPENDS = "glib-2.0 glib-2.0-native"
-
-inherit autotools pkgconfig bash-completion gobject-introspection
-
-SRC_URI = "http://www.freedesktop.org/software/${BPN}/${BPN}-${PV}.tar.xz"
-
-SRC_URI[sha256sum] = "a71963bb1097a42665287e40a9a36f95b8f9d6d6a4b7a5de22d660328af97cb9"
-
-PACKAGECONFIG ??= "udev mbim"
-PACKAGECONFIG[udev] = ",--without-udev,libgudev"
-PACKAGECONFIG[mbim] = "--enable-mbim-qmux,--disable-mbim-qmux,libmbim"

recipes-connectivity/modemmanager/files/77-mm-netmodule-whitelist.rules

@@ -9,9 +9,4 @@ ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1141", ENV{ID_MM_DEVICE_PROCESS}="1"
 ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1143", ENV{ID_MM_DEVICE_PROCESS}="1"
 ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1146", ENV{ID_MM_DEVICE_PROCESS}="1"
 
-# LARA-L6
-ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1341", ENV{ID_MM_DEVICE_PROCESS}="1"
-ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1342", ENV{ID_MM_DEVICE_PROCESS}="1"
-ATTRS{idVendor}=="1546", ATTRS{idProduct}=="1343", ENV{ID_MM_DEVICE_PROCESS}="1"
-
 LABEL="mm_netmodule_whitelist_end"

recipes-connectivity/modemmanager/modemmanager_git.bb

@@ -2,14 +2,14 @@ require recipes-connectivity/modemmanager/modemmanager_1.14.8.bb
 
 # Use custom git repo as SRC
 SRC_URI = "git://gitlab.com/netmodule/third-party/ModemManager;protocol=ssh;user=git;branch=mm-1-14-netmodule;"
-SRCREV ?= "35ef2f387bf53f0601901a5f08ab0f6bf57105c4"
+SRCREV = "${AUTOREV}"
 S = "${WORKDIR}/git"
 
 # Keep only ublox plugin
-EXTRA_OECONF += "--disable-all-plugins --enable-plugin-ublox --enable-plugin-generic"
+EXTRA_OECONF += "--disable-all-plugins --enable-plugin-ublox"
 
-# Exclude mbim
-PACKAGECONFIG = "systemd qmi"
+# Exclude mbim and qmi
+PACKAGECONFIG = "systemd"
 
 # Add whitelist rules
 FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

recipes-connectivity/networkmanager/networkmanager-conf.bb

@@ -1,3 +1,5 @@
+inherit allarch
+
 DESCRIPTION = "Configuration files for NetworkManager"
 
 LICENSE = "Proprietary"
@@ -6,14 +8,13 @@ LIC_FILES_CHKSUM = "file://${COREBASE}/meta/files/common-licenses/Proprietary;md
 RDEPENDS_${PN} = "networkmanager"
 PACKAGECONFIG ?= ""
 
-export DEFAULT_ETH ??= "eth0"
+DEFAULT_ETH ??= "eth0"
 PACKAGECONFIG[unmanaged-devices] = ""
 PACKAGECONFIG[ethernet-dhcp] = ""
 
 SRC_URI = " \
                  file://eth0-static \
                  file://eth0-dhcp \
-                 file://bridge-slave-eth0.nmconnection \
                  file://NetworkManager.conf \
                  file://00-fallback-dns.conf \
                  file://unmanaged-devices.conf \
@@ -24,59 +25,24 @@ SRC_URI_append_am335x-nrhw20 = " \
                 file://system-connections-dhcp.tar.gz \
 "
 
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-SYSTEM_CONNECTIONS = "${D}${sysconfdir}/NetworkManager/system-connections/"
-
 do_install () {
     install -d ${D}${sysconfdir}/NetworkManager/dnsmasq.d
-    install -d ${SYSTEM_CONNECTIONS}
+    install -d ${D}${sysconfdir}/NetworkManager/system-connections
     install -m 0644 ${WORKDIR}/NetworkManager.conf ${D}${sysconfdir}/NetworkManager/
     install -m 0644 ${WORKDIR}/00-fallback-dns.conf ${D}${sysconfdir}/NetworkManager/dnsmasq.d/
 
-    static_ifaces=""
-    dhcp_ifaces=""
-    bridged_ifaces=""
-
     if ${@bb.utils.contains('PACKAGECONFIG','ethernet-dhcp','true','false',d)}; then
-        # DHCP on main interface and static IP on the user module interface (if present)
-        dhcp_ifaces="$DEFAULT_ETH"
-        if ${@bb.utils.contains('MACHINE_FEATURES','user-module','true','false',d)}; then
-            static_ifaces="umnet0"
-        fi
+        install -m 0600 ${WORKDIR}/eth0-dhcp ${D}${sysconfdir}/NetworkManager/system-connections/eth0.nmconnection
     else
-        # static IP either on the bridge or main interface
-        if ${@bb.utils.contains('MACHINE_FEATURES','user-module','true','false',d)}; then
-            static_ifaces="br0"
-            bridged_ifaces="$DEFAULT_ETH umnet0"
-        else
-            static_ifaces="$DEFAULT_ETH"
-        fi
+        install -m 0600 ${WORKDIR}/eth0-static ${D}${sysconfdir}/NetworkManager/system-connections/eth0.nmconnection
     fi
 
-
-    for iface in $static_ifaces; do
-        install -m 0600 ${WORKDIR}/eth0-static ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-        sed -i "s/eth0/$iface/g" ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-
-        # Handle bridges
-        if ! [ "$iface" = "${iface#br}" ]; then
-            # Change type of main connection to bridge
-            sed -i "s/type=.*/type=bridge/g" ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-            printf "\n[bridge]\nstp=false\n" >> ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-        fi
-    done
-
-    for iface in $dhcp_ifaces; do
-        install -m 0600 ${WORKDIR}/eth0-dhcp ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-        sed -i "s/eth0/$iface/g" ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-    done
-
-
-    for iface in $bridged_ifaces; do
-        install -m 0600 ${WORKDIR}/bridge-slave-eth0.nmconnection ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-        sed -i "s/eth0/$iface/g" ${SYSTEM_CONNECTIONS}/$iface.nmconnection
-    done
+    # Handle HWs with different default interface
+    if [ "${DEFAULT_ETH}" != "eth0" ]; then
+        sed -i 's/eth0/${DEFAULT_ETH}/g' ${D}${sysconfdir}/NetworkManager/system-connections/*
+        mv ${D}${sysconfdir}/NetworkManager/system-connections/eth0.nmconnection \
+          ${D}${sysconfdir}/NetworkManager/system-connections/${DEFAULT_ETH}.nmconnection
+    fi
 
 
     if ${@bb.utils.contains('PACKAGECONFIG','unmanaged-devices','true','false',d)}; then
@@ -86,11 +52,11 @@ do_install () {
 }
 
 do_install_append_am335x-nrhw20() {
-    rm -rf ${SYSTEM_CONNECTIONS}/*
+    rm -rf ${D}${sysconfdir}/NetworkManager/system-connections/*
     if ${@bb.utils.contains('PACKAGECONFIG','ethernet-dhcp','true','false',d)}; then
-        install -m 0600 ${WORKDIR}/system-connections-dhcp/* ${SYSTEM_CONNECTIONS}/
+        install -m 0600 ${WORKDIR}/system-connections-dhcp/* ${D}${sysconfdir}/NetworkManager/system-connections/
     else
-        install -m 0600 ${WORKDIR}/system-connections-static/* ${SYSTEM_CONNECTIONS}/
+        install -m 0600 ${WORKDIR}/system-connections-static/* ${D}${sysconfdir}/NetworkManager/system-connections/
     fi
 }
 
@@ -98,7 +64,7 @@ do_install_append_am335x-nrhw20() {
 FILES_${PN} = " \
     ${sysconfdir}/NetworkManager/NetworkManager.conf \
     ${sysconfdir}/NetworkManager/dnsmasq.d \
-    ${sysconfdir}/NetworkManager/system-connections \
+	${sysconfdir}/NetworkManager/system-connections \
     ${sysconfdir}/NetworkManager/conf.d \
 "
 

recipes-connectivity/networkmanager/networkmanager-conf/bridge-slave-eth0.nmconnection

@@ -1,12 +0,0 @@
-[connection]
-id=bridge-slave-eth0
-type=ethernet
-interface-name=eth0
-master=br0
-permissions=
-slave-type=bridge
-
-[ethernet]
-mac-address-blacklist=
-
-[bridge-port]

recipes-connectivity/networkmanager/networkmanager-conf/eth0-dhcp

@@ -1,5 +1,6 @@
 [connection]
 id=ethernet
+uuid=2a2b6485-4d06-4b86-8051-751399c6881a
 type=ethernet
 interface-name=eth0
 permissions=

recipes-connectivity/networkmanager/networkmanager-conf/eth0-static

@@ -1,5 +1,6 @@
 [connection]
 id=ethernet
+uuid=2a2b6485-4d06-4b86-8051-751399c6881a
 type=ethernet
 interface-name=eth0
 permissions=

recipes-connectivity/nmubxlib/nmubxlib.bb

@@ -18,7 +18,7 @@ PV = "1.0-git${SRCPV}"
 PR = "r1"
 
 SRC_URI = "git://gitlab.com/netmodule/tools/nmubxlib.git;protocol=ssh;user=git;branch=master"
-SRCREV = "7c22b57cdd169a6651cb0c17a215d1e448727bcb"
+SRCREV ?= "${AUTOREV}"
 S = "${WORKDIR}/git"
 
 

recipes-connectivity/tibluetooth/tibluetooth.bb

@@ -8,17 +8,11 @@ LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425
 PR = "r2"
 
 inherit systemd
-inherit allarch
 
-RDEPENDS_${PN} = "\
-    firmware-ti-wl18xx \
-    bash \
-    libgpiod-tools \
-    "
+RDEPENDS_{PN} = "firmware-ti-wl18xx"
 
 SRC_URI =  " \
     file://tibluetooth.service \
-    file://tibluetooth.sh \
     "
 
 S = "${WORKDIR}"
@@ -32,10 +26,7 @@ FILES_${PN}_append = " \
                     "
 
 do_install () {
-    sed -i 's:BINDIR:${bindir}:g' tibluetooth.service
     install -d ${D}${systemd_unitdir}/system/
     install -m 0644 tibluetooth.service ${D}${systemd_unitdir}/system/tibluetooth.service
-    install -d ${D}${bindir}
-    install -m 0755 tibluetooth.sh ${D}${bindir}/tibluetooth
 }
 

recipes-connectivity/tibluetooth/tibluetooth/am335x-hw26

@@ -0,0 +1 @@
+am335x-nmhw21/

recipes-connectivity/tibluetooth/tibluetooth/am335x-nmhw21/tibluetooth.service

@@ -0,0 +1,18 @@
+[Unit]
+Description=Attach ti bluetooth
+Before=bluetooth.target
+Requires=bluetooth.target
+
+[Service]
+Type=forking
+ExecStartPre=-/bin/sh -c "/bin/echo 52 > /sys/class/gpio/export"
+ExecStartPre=-/bin/sh -c "/bin/echo out > /sys/class/gpio/gpio52/direction"
+ExecStartPre=/bin/sh -c "/bin/echo 1 > /sys/class/gpio/gpio52/value"
+ExecStart=/usr/bin/hciattach /dev/ttyS5 texas 3000000 flow
+
+ExecStopPost=/bin/sh -c "/bin/echo 0 > /sys/class/gpio/gpio52/value"
+
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target

recipes-connectivity/tibluetooth/tibluetooth/am335x-nmhw24/tibluetooth.service

@@ -0,0 +1,18 @@
+[Unit]
+Description=Attach ti bluetooth
+Before=bluetooth.target
+Requires=bluetooth.target
+
+[Service]
+Type=forking
+ExecStartPre=-/bin/sh -c "/bin/echo 52 > /sys/class/gpio/export"
+ExecStartPre=-/bin/sh -c "/bin/echo out > /sys/class/gpio/gpio52/direction"
+ExecStartPre=/bin/sh -c "/bin/echo 1 > /sys/class/gpio/gpio52/value"
+ExecStart=/usr/bin/hciattach /dev/ttyS5 texas 3000000 flow
+
+ExecStopPost=/bin/sh -c "/bin/echo 0 > /sys/class/gpio/gpio52/value"
+
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target

recipes-connectivity/tibluetooth/tibluetooth/am335x-nrhw16/tibluetooth.service

@@ -0,0 +1,19 @@
+[Unit]
+Description=Attach ti bluetooth
+Before=bluetooth.target
+Requires=bluetooth.target
+
+[Service]
+Type=forking
+ExecStartPre=/bin/sleep 10
+ExecStartPre=-/bin/sh -c "/bin/echo 100 > /sys/class/gpio/export"
+ExecStartPre=-/bin/sh -c "/bin/echo out > /sys/class/gpio/gpio100/direction"
+ExecStartPre=/bin/sh -c "/bin/echo 1 > /sys/class/gpio/gpio100/value"
+ExecStart=/usr/bin/hciattach /dev/ttyS5 texas 3000000 flow
+
+ExecStopPost=/bin/sh -c "/bin/echo 0 > /sys/class/gpio/gpio100/value"
+
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target

recipes-connectivity/tibluetooth/tibluetooth/am335x-nrhw20/tibluetooth.service

@@ -0,0 +1,18 @@
+[Unit]
+Description=Attach ti bluetooth
+Before=bluetooth.target
+Requires=bluetooth.target
+
+[Service]
+Type=forking
+ExecStartPre=-/bin/sh -c "/bin/echo 52 > /sys/class/gpio/export"
+ExecStartPre=-/bin/sh -c "/bin/echo out > /sys/class/gpio/gpio52/direction"
+ExecStartPre=/bin/sh -c "/bin/echo 1 > /sys/class/gpio/gpio52/value"
+ExecStart=/usr/bin/hciattach /dev/ttyS5 texas 3000000 flow
+
+ExecStopPost=/bin/sh -c "/bin/echo 0 > /sys/class/gpio/gpio52/value"
+
+Restart=on-failure
+
+[Install]
+WantedBy=multi-user.target

recipes-connectivity/tibluetooth/tibluetooth/tibluetooth.service

@@ -1,16 +0,0 @@
-[Unit]
-Description=Attach ti bluetooth
-Before=bluetooth.target
-Requires=bluetooth.target
-Requires=dev-bluetooth0.device
-After=dev-bluetooth0.device
-
-[Service]
-Type=forking
-ExecStart=BINDIR/tibluetooth start
-ExecStop=BINDIR/tibluetooth stop
-
-PIDFile=/run/bluetooth0-hci.pid
-
-[Install]
-WantedBy=multi-user.target

recipes-connectivity/tibluetooth/tibluetooth/tibluetooth.sh

@@ -1,43 +0,0 @@
-#!/usr/bin/env bash
-
-PIDFILE_GPIO=/run/bluetooth0-gpio.pid
-PIDFILE_HCI=/run/bluetooth0-hci.pid
-
-enable_bt_chip() {
-        BT_EN=$(gpiofind BT_EN)
-        gpioset -m signal ${BT_EN}=1 &
-        PID_GPIO=$!
-        echo $PID_GPIO > $PIDFILE_GPIO
-}
-
-disable_bt_chip() {
-        kill $(<$PIDFILE_GPIO)
-}
-
-if [ "$1" = "start" ]; then
-        retries=0
-        while [ $retries -lt 5 ]
-        do
-                enable_bt_chip
-                if HCI_LOG=$(hciattach -p /dev/bluetooth0 texas 3000000 flow ); then
-                        # Writing PID
-                        echo "$HCI_LOG" | tail -n 1 > $PIDFILE_HCI
-                        exit 0
-                fi
-
-                echo "$HCI_LOG"
-                disable_bt_chip
-                ((retries++))
-                sleep 1
-        done
-
-        echo "Could not start hciattach"
-        exit -1
-
-elif [ "$1" = "stop" ]; then
-        kill $(<$PIDFILE_HCI)
-        disable_bt_chip
-else
-        echo "Unknown command"
-        exit -1
-fi

recipes-connectivity/ublox-gnss-fw-update/files/flash.xml

@@ -0,0 +1,216 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE flash SYSTEM "flash.dtd">
+<flash fisVersion="2" revision="$Rev: 100111 $">
+  <category cmd="SST" supply="3V">
+    <sectorSize>4096</sectorSize>
+    <device jedec="xBF2601">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xBF2602">
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="xBF2643" cmd="SST2">
+      <!-- the SQI block only supports up to 32MBit -->
+      <sectorCount>1024</sectorCount>
+    </device>
+  </category>
+  <category cmd="SPANSION" supply="3V">
+    <device jedec="x014016">
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="x014015">
+      <sectorCount>512</sectorCount>
+    </device>
+  </category>
+  <category cmd="WINBOND" supply="3V">
+    <sectorSize>4096</sectorSize>
+    <device jedec="xEF4013">
+      <sectorCount>128</sectorCount>
+    </device>
+    <device jedec="xEF4014">
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="xEF4015">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xEF4016">
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="xEF4017">
+      <!-- the SQI block only supports up to 32MBit -->
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="xEF5014" supply="1.8V">
+      <cap writeSuspend="0"/>
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="xEF6013" supply="1.8V">
+      <sectorCount>128</sectorCount>
+    </device>
+    <device jedec="xEF6014" supply="1.8V">
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="xEF6015" supply="1.8V">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xEF6016" supply="1.8V">
+      <sectorCount>1024</sectorCount>
+    </device>
+  </category>
+  <category cmd="MACRONIX">
+    <sectorSize>4096</sectorSize>
+    <sectorCount>256</sectorCount>
+    <device jedec="xC22014" supply="3V"/>
+    <device jedec="xC22016" supply="3V">
+      <cap writeSuspend="1"/>
+      <minEraseSuspend>12000</minEraseSuspend>
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="xC22515" supply="3V">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xC22415">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xC22534" supply="1.8V">
+      <cap writeSuspend="1"/>
+      <minEraseSuspend>12000</minEraseSuspend>
+    </device>
+    <device jedec="xC22535" supply="1.8V">
+      <cap writeSuspend="1"/>
+      <minEraseSuspend>12000</minEraseSuspend>
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xC22536" supply="3V" cmd="MACRONIX2">
+      <cap writeSuspend="1"/>
+      <minEraseSuspend>9600</minEraseSuspend>
+      <sectorCount>1024</sectorCount>
+    </device>
+  </category>
+  <category cmd="GIGADEVICE">
+    <device jedec="xC84013" supply="3V">
+      <sectorSize>4096</sectorSize>
+      <sectorCount>128/</sectorCount>
+    </device>
+    <device jedec="xC84014" supply="3V">
+      <sectorSize>4096</sectorSize>
+      <sectorCount>256/</sectorCount>
+    </device>
+    <device jedec="xC84015" supply="3V">
+      <sectorSize>4096</sectorSize>
+      <sectorCount>512/</sectorCount>
+    </device>
+    <device jedec="xC84016" supply="3V">
+      <sectorSize>4096</sectorSize>
+      <sectorCount>1024/</sectorCount>
+    </device>
+  </category>
+  <device cmd="MICRON" jedec="x20BA16" supply="3V">
+    <sectorSize>4096</sectorSize>
+    <sectorCount>1024/</sectorCount>
+  </device>
+  <category cmd="EON">
+    <device jedec="x1C3013">
+      <sectorCount>128</sectorCount>
+      <!-- this device needs a min CS high time of 100ns between two reads -->
+      <cfg>0x000010CC</cfg>
+    </device>
+    <device jedec="x1C3014">
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="x1C7015">
+      <sectorCount>512</sectorCount>
+    </device>
+  </category>
+  <category cmd="EON" supply="1.8V">
+    <!-- these devices needs a min CS high time of 30ns between two reads -->
+    <cfg>0x000004CC</cfg>
+    <device jedec="x1C3814">
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="x1C3815">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="x1C3816">
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="x1C3817">
+      <!-- the SQI block only supports up to 32MBit -->
+      <sectorCount>1024</sectorCount>
+    </device>
+  </category>
+  <category cmd="FIDELIX">
+    <device jedec="xF83214">
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="xF83215">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xF84214" supply="1.8V">
+      <sectorCount>256</sectorCount>
+    </device>
+    <device jedec="xF84215" supply="1.8V">
+      <sectorCount>512</sectorCount>
+    </device>
+    <device jedec="xF84216" supply="1.8V">
+      <sectorCount>1024</sectorCount>
+    </device>
+    <device jedec="xF84217" supply="1.8V">
+      <!-- the SQI block only supports up to 32MBit -->
+      <sectorCount>1024</sectorCount>
+    </device>
+  </category>
+  <!-- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -->
+  <!-- %   Don't touch anything below here. This is autogenerated!   % -->
+  <!-- %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -->
+  <cmdset name="EON">
+    <length>4032</length>
+    <checksum>4ae9f731</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="FIDELIX">
+    <length>4032</length>
+    <checksum>b2daeed8</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="GIGADEVICE">
+    <length>4032</length>
+    <checksum>853b6a2b</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="MACRONIX">
+    <length>4032</length>
+    <checksum>215f4423</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="MACRONIX2">
+    <length>4032</length>
+    <checksum>d51ae60f</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="MICRON">
+    <length>4032</length>
+    <checksum>3d2ff0c5</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="SPANSION">
+    <length>4032</length>
+    <checksum>2b5e2d56</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="SST">
+    <length>4032</length>
+    <checksum>7df33088</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="SST2">
+    <length>4032</length>
+    <checksum>7ee13dd7</checksum>
+    <code>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</code>
+  </cmdset>
+  <cmdset name="WINBOND">
+    <length>4032</length>
+    <checksum>94ad0fde</checksum>
+    <code>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</code>
+  </cmdset>
+</flash>

recipes-connectivity/ublox-gnss-fw-update/files/gnss-fw-update

@@ -0,0 +1,13 @@
+#!/usr/bin/env sh
+
+systemctl stop gpsd
+systemctl stop gpsd.socket
+killall gpsd
+killall ser2net
+fwupdate -p /dev/ttyS3 -F /lib/firmware/ubx-fw-flash.xml /lib/firmware/UBX_M8_301_ADR_421_NEO_M8L.bin
+
+if [ $? -eq 0 ]; then
+	echo "Firmware update was successful, please do a full power cycle of the device"
+else
+	echo "Firmware update failed"
+fi

recipes-connectivity/ublox-gnss-fw-update/ublox-gnss-fw-update.bb

@@ -0,0 +1,42 @@
+SUMMARY = "FW update tool for ublox NEO-M8L"
+DESCRIPTION = "Fw update tool for ublox NEO-M8L"
+SECTION = "utils"
+
+
+LICENSE="Proprietary"
+LIC_FILES_CHKSUM="file://${COREBASE}/meta/files/common-licenses/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
+
+DEPENDS = "ncurses"
+
+SRC_URI = "file://ubx-fw-update.tar.gz \
+           file://flash.xml \
+           file://UBX_M8_301_ADR_421_NEO_M8L.bin \
+           file://gnss-fw-update \
+          "
+
+PACKAGECONFIG ?= ""
+PACKAGECONFIG[ubx-tool-only] = ""
+
+S = "${WORKDIR}/ubx-fw-update"
+
+do_compile() {
+     oe_runmake
+}
+
+do_install() {
+    install -d ${D}${bindir}
+    install -m 0755 fwupdate ${D}${bindir}/
+
+    if ! ${@bb.utils.contains('PACKAGECONFIG','ubx-tool-only','true','false',d)}; then
+        install -m 0755 ../gnss-fw-update ${D}${bindir}/
+
+        install -d  ${D}${nonarch_base_libdir}/firmware/
+        install -m 0644 ../UBX_M8_301_ADR_421_NEO_M8L.bin ${D}${nonarch_base_libdir}/firmware/
+        install -m 0644 ../flash.xml ${D}${nonarch_base_libdir}/firmware/ubx-fw-flash.xml
+    fi
+}
+
+FILES_${PN} = " \
+               ${bindir} \
+               ${nonarch_base_libdir} \
+              "

recipes-connectivity/wlconf-bin/wlconf-bin_git.bb

@@ -0,0 +1,26 @@
+DESCRIPTION = "Configuration binary wlconf for ti wifi chips"
+HOMEPAGE = "http://www.netmodule.com/"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
+
+SRC_URI = "git://gitlab.com/netmodule/tools/wlconf-bin.git;protocol=ssh;user=git;branch=master"
+
+S = "${WORKDIR}/git"
+SRCREV = "${AUTOREV}"
+
+INSTALLPATH = "${nonarch_base_libdir}/firmware/ti-connectivity"
+CONFIGBINARY = "wl18xx-conf.bin"
+
+
+FILES_${PN} += "${nonarch_base_libdir}/firmware/"
+
+    
+do_install () {
+    
+    install -d ${D}/${INSTALLPATH}
+
+    if ls ${S}/wlconf-8.7.3/bin/${MACHINE}/${CONFIGBINARY} 1> /dev/null 2>&1 ; then
+       install -m 0644 ${S}/wlconf-8.7.3/bin/${MACHINE}/${CONFIGBINARY} ${D}/${INSTALLPATH}
+       ln -sfr ${D}/${INSTALLPATH}/${CONFIGBINARY} ${D}${nonarch_base_libdir}/firmware/${CONFIGBINARY}
+    fi
+}

recipes-connectivity/wwan-config/wwan-config.bb

@@ -8,12 +8,10 @@ RDEPENDS_${PN} += " \
     python3-setuptools \
     python3-configparser \
     python3-systemd \
-    lmsensors-sensors \
-    lmsensors-config-libsensors \
     "
 DEPENDS = "python3-setuptools-git-version-native"
 
-inherit gitpkgv systemd allarch
+inherit gitpkgv systemd
 
 
 # Package Version (built from tags)
@@ -23,7 +21,7 @@ PV = "1.0-git${SRCPV}"
 
 PR = "r1"
 
-SRCREV = "f885ccb90b31c90bfed0b6d62c26ad64d69805c1"
+SRCREV ?= "${AUTOREV}"
 SRC_URI = "git://gitlab.com/netmodule/tools/wwan-config.git;protocol=ssh;user=git;branch=master \
            file://wwan-config@.service \
            file://default.conf \
@@ -32,31 +30,27 @@ S = "${WORKDIR}/git"
 
 inherit setuptools3 
 
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+do_configure_prepend() {
+    cp ${S}/platforms/${MACHINE}/* ${S}/wwan_config
+}
+
 do_install_append() {
     install -d ${D}/${systemd_unitdir}/system/
     install -m 0644 ${WORKDIR}/wwan-config@.service ${D}/${systemd_unitdir}/system/
 
     install -d ${D}/${sysconfdir}/wwan
     if [ ! -z "${WWAN_NBR}" ] ; then
-        install -d ${D}${sysconfdir}/systemd/system/multi-user.target.requires/
+        install -d ${D}${sysconfdir}/systemd/system/multi-user.target.wants/
         for i in `seq 0 ${WWAN_NBR}`; do 
             if [ $i = ${WWAN_NBR} ]; then continue; fi
 
             if [ "${SYSTEMD_AUTO_ENABLE}" = "enable" ] ; then
                 ln -sf ${systemd_unitdir}/system/wwan-config@.service \
-                    ${D}${sysconfdir}/systemd/system/multi-user.target.requires/wwan-config@wwan$i.service
+                    ${D}${sysconfdir}/systemd/system/multi-user.target.wants/wwan-config@wwan$i.service
             fi
 
             install -m 0644 ${WORKDIR}/default.conf ${D}${sysconfdir}/wwan/wwan$i.conf
-            if [ ! -z "${NM_WWAN_APN}" ]; then
-                sed -i 's/apn=/apn=${NM_WWAN_APN}/g' ${D}${sysconfdir}/wwan/wwan$i.conf
-            fi
-            if [ ! -z "${NM_WWAN_USER}" ]; then
-                sed -i 's/user=/user=${NM_WWAN_USER}/g' ${D}${sysconfdir}/wwan/wwan$i.conf
-            fi
-            if [ ! -z "${NM_WWAN_PASSWORD}" ]; then
-                sed -i 's/password=/password=${NM_WWAN_PASSWORD}/g' ${D}${sysconfdir}/wwan/wwan$i.conf
-            fi
         done
     fi
 }

recipes-connectivity/wwan-config/wwan-config/default.conf

@@ -3,7 +3,6 @@
 #
 
 # Define a private APN to be used by the modem
-#  ! ONLY REQUIRED WHEN USING UBLOX TOBY-L2, will be ignored for other modems
 #
 # Required fields:
 #     apn:      Name of the access point
@@ -41,7 +40,6 @@ SIM=auto
 #  - Bridge : The modem will only act as a Bridge between the local and the GSM network.
 #
 # usb_profile (+UUSBCONF) :
-#  ! ONLY USED WITH TOBY-L2, will be ignored for other modems
 #  Select between different network/usb interfaces :
 #  - RNDIS
 #  - ECM

recipes-connectivity/wwan-config/wwan-config/wwan-config@.service

@@ -7,11 +7,6 @@ ExecStart=/usr/bin/wwan-config %I
 PIDFile=/run/%I.pid
 Restart=on-failure
 Nice=-20
-# Start time may include power cycles and start of ModemManager
-TimeoutStartSec=180
-# The default kill mode is killing the subprocesses created by the "os.system"
-# calls used to stop ModemManager when handling the kill signal.
-KillMode=mixed
 
 [Install]
 RequiredBy=multi-user.target

recipes-core/board-descriptor/board-descriptor.bb

@@ -9,8 +9,6 @@ LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
 PR = "r0"
 
-inherit python3-dir
-
 RDEPENDS_${PN} = "python3-core python3-json"
 
 SRC_URI =  " \

recipes-core/udev/udev-rules-nmhw_git.bb

@@ -9,7 +9,7 @@ LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda
 SECTION = "base"
 
 S = "${WORKDIR}/git"
-SRCREV = "26cf27fd134036e4d756ac289764a5b5083966d2"
+SRCREV = "${AUTOREV}"
 
 SRC_URI = "git://gitlab.com/netmodule/tools/udev-rules-nmhw;protocol=ssh;user=git;branch=master;"
 
@@ -18,8 +18,5 @@ do_install () {
 
     if ls ${S}/machines/${MACHINE}/*.rules 1> /dev/null 2>&1 ; then
        install -m 0644 ${S}/machines/${MACHINE}/*.rules ${D}${sysconfdir}/udev/rules.d/
-       if [ -f ${S}/machines/${MACHINE}/*.sh ]; then
-           install -m 0755 ${S}/machines/${MACHINE}/*.sh ${D}${sysconfdir}/udev/rules.d/
-       fi
     fi
 }

recipes-kernel/dt-overlay/dt-overlay_1.0.bb

@@ -0,0 +1,13 @@
+DESCRIPTION = "Allow loading of devicetree overlays via configfs"
+HOMEPAGE = "http://www.netmodule.com/"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
+
+inherit module
+
+PV = "1.0.0"
+SRCREV ?= "${AUTOREV}"
+
+SRC_URI = "git://github.com/netmodule/dt-overlay.git;protocol=https"
+
+S = "${WORKDIR}/git"

recipes-kernel/dt-overlays/dt-overlays.bb

@@ -0,0 +1,37 @@
+DESCRIPTION = "Allow loading of devicetree overlays via configfs"
+HOMEPAGE = "http://www.netmodule.com/"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/GPL-2.0;md5=801f80980d171dd6425610833a22dbe6"
+
+DEPENDS = "dtc-native"
+
+PV = "1.0.0"
+SRCREV ?= "de7143db7ec306775dad690fcaa8922202b928dc"
+
+SRC_URI = "git://git.netmodule.intranet/nmrouter/dt-overlays.git;protocol=ssh;user=gitea"
+
+S = "${WORKDIR}/git"
+
+dtos = " \
+    am335x-nbhw16-shield-comio-gpio \
+    am335x-nbhw16-shield-dualcan-can \
+    am335x-nbhw16-shield-dualcan-dyngpio \
+    am335x-nbhw16-shield-dualcan-fixgpio \
+    "
+
+
+
+FILES_${PN} += "${nonarch_base_libdir}/firmware"
+
+do_compile() {
+    for dto in ${dtos}; do
+        dtc -@ -i dts -o dto -o $dto.dtbo $dto.dts
+    done
+}
+
+do_install() {
+    install -d ${D}${nonarch_base_libdir}/firmware/
+    for dto in ${dtos}; do
+        install -m 0644 $dto.dtbo ${D}${nonarch_base_libdir}/firmware/
+    done
+}

recipes-kernel/dtc/dtc.inc

@@ -0,0 +1,23 @@
+SUMMARY = "Device Tree Compiler"
+DESCRIPTION = "The Device Tree Compiler is a tool used to manipulate the Open-Firmware-like device tree used by PowerPC kernels."
+SECTION = "bootloader"
+LICENSE = "GPLv2 | BSD"
+DEPENDS = "flex-native bison-native"
+
+SRC_URI = "git://git.kernel.org/pub/scm/utils/dtc/dtc.git \
+           file://make_install.patch \
+	  "
+
+EXTRA_OEMAKE='PREFIX="${prefix}" LIBDIR="${libdir}" DESTDIR="${D}" NO_PYTHON=1'
+CFLAGS="-Wno-error"
+
+S = "${WORKDIR}/git"
+
+do_install () {
+	oe_runmake install
+}
+
+PACKAGES =+ "${PN}-misc"
+FILES_${PN}-misc = "${bindir}/convert-dtsv0 ${bindir}/ftdump ${bindir}/dtdiff"
+
+RDEPENDS_${PN}-misc += "bash"

recipes-kernel/dtc/dtc/make_install.patch

@@ -0,0 +1,26 @@
+Upstream-Status: Inappropriate [configuration]
+
+Index: git/Makefile
+===================================================================
+--- git.orig/Makefile	2011-11-02 14:52:17.243104779 -0700
++++ git/Makefile	2011-11-02 15:06:01.555104982 -0700
+@@ -18,7 +18,7 @@
+ CPPFLAGS = -I libfdt -I .
+ WARNINGS = -Wall -Wpointer-arith -Wcast-qual -Wnested-externs \
+ 	-Wstrict-prototypes -Wmissing-prototypes -Wredundant-decls -Wshadow
+-CFLAGS = -g -Os $(SHAREDLIB_CFLAGS) -Werror $(WARNINGS)
++CFLAGS = -g -Os $(SHAREDLIB_CFLAGS) $(WARNINGS)
+ 
+ BISON = bison
+ LEX = flex
+@@ -161,8 +161,8 @@
+ 	$(INSTALL) -d $(DESTDIR)$(BINDIR)
+ 	$(INSTALL) $(BIN) $(SCRIPTS) $(DESTDIR)$(BINDIR)
+ 	$(INSTALL) -d $(DESTDIR)$(LIBDIR)
+-	$(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)
+-	ln -sf $(notdir $(LIBFDT_lib)) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)
++	$(INSTALL) $(LIBFDT_lib) $(DESTDIR)$(LIBDIR)/$(LIBFDT_soname)
++	ln -sf $(LIBFDT_soname) $(DESTDIR)$(LIBDIR)/$(notdir $(LIBFDT_lib))
+ 	ln -sf $(LIBFDT_soname) $(DESTDIR)$(LIBDIR)/libfdt.$(SHAREDLIB_EXT)
+ 	$(INSTALL) -m 644 $(LIBFDT_archive) $(DESTDIR)$(LIBDIR)
+ 	$(INSTALL) -d $(DESTDIR)$(INCLUDEDIR)

recipes-kernel/dtc/dtc_git.bb

@@ -0,0 +1,11 @@
+require dtc.inc
+
+LIC_FILES_CHKSUM = "file://GPL;md5=94d55d512a9ba36caa9b7df079bae19f \
+		    file://libfdt/libfdt.h;beginline=3;endline=52;md5=fb360963151f8ec2d6c06b055bcbb68c"
+
+SRCREV = "1ae2d185ddda6ca578dce5641a8a39db3117492d"
+PV = "1.4.5+git${SRCPV}"
+
+S = "${WORKDIR}/git"
+
+BBCLASSEXTEND = "native nativesdk"

recipes-kernel/kernel-modules/cryptodev-module_%.bbappend

@@ -1,2 +0,0 @@
-# We are building one kernel for all machines with the same architecture
-PACKAGE_ARCH = "${TUNE_PKGARCH}"

recipes-kernel/kernel-modules/mac80211_%.bbappend

@@ -1,2 +0,0 @@
-# We are building one kernel for all machines with the same architecture
-PACKAGE_ARCH = "${TUNE_PKGARCH}"