Adapt gpsd recipe to make it compatible with gnss-mgr

gpsd needs some small changes to not conflict with gnss-mgr id:502637
nwl-distro: Add gnss-mgr to test tools
2024-03-15 14:00:01 +01:00 · 2024-03-15 14:00:01 +01:00 · 2024-03-15 14:00:01 +01:00 · 2024-03-15 14:00:01 +01:00 · 2024-03-15 14:00:01 +01:00 · 2024-03-15 14:00:01 +01:00
68 changed files with 966 additions and 234 deletions
--- a/2
+++ b/2
@ -1 +1 @@
-Subproject commit 91cff2b07a0f0df9accc8a368beefaecbd5e558b
+Subproject commit fd9b3e0a0ff210f95a384dc884dcf848adcc478f
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/include/all-netmodule.inc
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/include/all-netmodule.inc
@ -0,0 +1 @@
+MACHINE_FEATURES += "nrsw-ready"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/include/armada.inc
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/include/armada.inc
@ -1,3 +1,5 @@
+require all-netmodule.inc
+
 SOC_FAMILY = "armada"
 require conf/machine/include/soc-family.inc

@ -14,10 +16,14 @@ INODE_SIZE = "1024"
 DIR_INODE_SIZE = "1024"
 FILE_INODE_SIZE = "0"

+WKS_FILE ?= "nm-armada-385-mmc.wks"
+do_image_wic[depends] += "virtual/bootloader:do_deploy"
+
 MACHINE_FEATURES:remove = "bluetooth"

 PREFERRED_PROVIDER_virtual/kernel = "linux-nrsw"

+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-armada"
 UBOOT_MACHINE = "${MACHINE}_defconfig"
 UBOOT_ENTRYPOINT = "0x13000000"
 UBOOT_LOADADDRESS = "${UBOOT_ENTRYPOINT}"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/include/ti33x.inc
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/include/ti33x.inc
@ -7,6 +7,7 @@
 #            xf86-video-modesetting \
 #            "

+require all-netmodule.inc
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules kernel-devicetree"
 NM_TARGET = "netbird"
 NM_ARCH = "arm"
@ -22,17 +23,18 @@ include conf/machine/include/arm/armv7a/tune-cortexa8.inc

 # IMAGE_FSTYPES += "tar.bz2 jffs2 wic wic.bmap"
 # EXTRA_IMAGECMD_jffs2 = "-lnp "
-# WKS_FILE ?= "beaglebone-yocto.wks"
 # IMAGE_INSTALL_append = " kernel-devicetree kernel-image-zimage"
 # do_image_wic[depends] += "mtools-native:do_populate_sysroot dosfstools-native:do_populate_sysroot"

 # SERIAL_CONSOLES = "115200;ttyO0"

-# PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-# PREFERRED_VERSION_linux-yocto ?= "4.18%"
+WKS_FILE ?= "nm-am335x-mmc.wks"
+do_image_wic[depends] += "virtual/bootloader:do_deploy"

 KERNEL_IMAGETYPE = "zImage"

+PREFERRED_PROVIDER_virtual/bootloader = "u-boot-ti33x"
+
 UBOOT_MACHINE = "${MACHINE}_defconfig"
 # SPL_BINARY = "MLO"
 UBOOT_SUFFIX = "img"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw14.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw14.conf
@ -2,12 +2,14 @@
 #@NAME: NRHW14 based routers like NB3800
 #@DESCRIPTION: Machine configuration for the NBHW14 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/armada.inc
+require include/armada.inc

 NRHW = "14"
 NM_MODELS = "3701 3711 3800"
 MAX_FS_SIZE = "279542"

+UBOOT_MACHINE = "armada-385-hw14_defconfig"
+
 # U-Boot reads actual DTB file name from board descriptor, see:
 # printenv fdt_image
 KERNEL_DEVICETREE = "\
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw16.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw16.conf
@ -2,11 +2,12 @@
 #@NAME: NRHW16 based routers like NB800
 #@DESCRIPTION: Machine configuration for the NBHW16 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/ti33x.inc
+require include/ti33x.inc

 NRHW = "16"
 NM_MODELS = "800"

 # WARNING: This file needs to be kept in sync with HW24. Therefor use the common include:
-require conf/machine/include/am335x-nrhw16-nrhw24.inc
+require include/am335x-nrhw16-nrhw24.inc

+UBOOT_MACHINE = "am335x_nbhw16_defconfig"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw17.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw17.conf
@ -2,12 +2,14 @@
 #@NAME: NRHW14 based routers like NB2800
 #@DESCRIPTION: Machine configuration for the NBHW17 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/armada.inc
+require include/armada.inc

 NRHW = "17"
 NM_MODELS = "2800 2810"
 MAX_FS_SIZE = "279542"

+UBOOT_MACHINE = "armada-385-hw17_defconfig"
+
 # U-Boot reads actual DTB file name from board descriptor, see:
 # printenv fdt_image
 KERNEL_DEVICETREE = "openwrt-nbhw17.dtb"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw18.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw18.conf
@ -2,12 +2,14 @@
 #@NAME: NRHW18 based routers like NB1800
 #@DESCRIPTION: Machine configuration for the NBHW18 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/armada.inc
+require include/armada.inc

 NRHW = "18"
 NM_MODELS = "1800 1810"
 MAX_FS_SIZE = "279542"

+UBOOT_MACHINE = "armada-385-hw18_defconfig"
+
 # U-Boot reads actual DTB file name from board descriptor, see:
 # printenv fdt_image
 KERNEL_DEVICETREE = " \
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw20.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw20.conf
@ -2,12 +2,14 @@
 #@NAME: NRHW16 based routers like NB800
 #@DESCRIPTION: Machine configuration for the NBHW16 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/ti33x.inc
+require include/ti33x.inc

 NRHW = "20"
 NM_MODELS = "1601 B-1601"
 MAX_FS_SIZE = "279542"

+UBOOT_MACHINE = "am335x_nrhw20_defconfig"
+
 KERNEL_DEVICETREE = "\
 	am335x-nrhw20-prod1.dtb \
 	"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw22.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw22.conf
@ -2,12 +2,14 @@
 #@NAME: NRHW22 based routers like NB650 / Phoenix Timeserver
 #@DESCRIPTION: Machine configuration for the NBHW22 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/ti33x.inc
+require include/ti33x.inc

 NRHW = "22"
 NM_MODELS = "650"
 MAX_FS_SIZE = "279542"

+UBOOT_MACHINE = "am335x_nrhw22_defconfig"
+
 KERNEL_DEVICETREE = "\
 	am335x-nrhw22-prod1.dtb \
 	"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw24.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw24.conf
@ -2,11 +2,13 @@
 #@NAME: NRHW24 based routers like NB800 facelift / NB800mk2 (or however you like to call it)
 #@DESCRIPTION: Machine configuration for the NBHW24 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/ti33x.inc
+require include/ti33x.inc

 NRHW = "24"
 NM_MODELS = "B-800"

-# WARNING: This file needs to be kept in sync with HW24. Therefor use the common include:
-require conf/machine/include/am335x-nrhw16-nrhw24.inc
+UBOOT_MACHINE = "am335x_nrhw24_defconfig"
+
+# WARNING: This file needs to be kept in sync with HW24. Therefor use the common include:
+require include/am335x-nrhw16-nrhw24.inc

--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw25.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw25.conf
@ -2,12 +2,14 @@
 #@NAME: NRHW25 based routers like TC-Router
 #@DESCRIPTION: Machine configuration for the NBHW24 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/ti33x.inc
+require include/ti33x.inc

 NRHW = "25"
 NM_MODELS ?= "660 670"
 MAX_FS_SIZE = "279542"

+UBOOT_MACHINE = "am335x_hw25_defconfig"
+
 KERNEL_DEVICETREE = "\
 	am335x-hw25-prod1.dtb \
 	"
--- a/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw26.conf
+++ b/layers/meta-netmodule-legacy-bsp/conf/machine/netmodule-hw26.conf
@ -2,12 +2,16 @@
 #@NAME: HW26 based routers like NG800
 #@DESCRIPTION: Machine configuration for the HW26 based routers http://netmodule.com/en/products/iot-routers

-require conf/machine/include/ti33x.inc
+require include/ti33x.inc

 NRHW = "26"
 NM_MODELS = "G-800"
 MAX_FS_SIZE = "279542"

+
+# HW26 is based on HW21, the boot config is the same
+UBOOT_MACHINE = "am335x_nmhw21_defconfig"
+
 KERNEL_DEVICETREE = "\
 	am335x-hw26-prod1.dtb \
 	"
--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/drivers/kernel-module-pcie/temporary-src-tree-fix-pcie.patch
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/drivers/kernel-module-pcie/temporary-src-tree-fix-pcie.patch
@ -1,38 +0,0 @@
-diff --git a/netbox_pcie.c b/netbox_pcie.c
-index 934368e..d982b78 100644
--- a/netbox_pcie.c
-+++ b/netbox_pcie.c
-@@ -36,7 +36,6 @@
- #include <linux/kern_levels.h>
- #include <linux/version.h>
- 
-#include <nbsw.h>
- #include <misc/nrsw-global.h>
- #include <linux/board_descriptor.h>
- 
-@@ -806,7 +805,6 @@ static int nm_pcie_probe(struct platform_device *pdev)
- 	pcie_slot_count = 0;
- 	hwver = hwrel = -1;
- 
-#ifdef NBSW_TARGET_netbolt_arm
- 	if (NBHW == 14) {
- 		for (i = 0; i < 6; i++) {
- 			ps = pcie_add_slot(i, PCIE_MAIN);
-@@ -850,8 +848,7 @@ static int nm_pcie_probe(struct platform_device *pdev)
- 			if (ret)
- 				goto error;
- 		}
-#elif defined(NBSW_TARGET_netbird_arm)
-	if (NBHW == 16) {
-+	} else if (NBHW == 16) {
- 		ps = pcie_add_slot(0, PCIE_MAIN);
- 		if (IS_ERR(ps)) {
- 			ret = PTR_ERR(ps);
-@@ -1116,7 +1113,6 @@ static int nm_pcie_probe(struct platform_device *pdev)
- 		ret = pcie_init_slot(ps);
- 		if (ret)
- 			goto error;
-#endif
- 	} else {
- 		printk("Unknwon NBHW: %d\n", NBHW);
- 		ret = -EINVAL;
--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/drivers/kernel-module-pcie_git.bb
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/drivers/kernel-module-pcie_git.bb
@ -3,11 +3,10 @@ LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://LICENSE.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"

 SRC_URI = "git://git.netmodule.intranet/NRSW/netbox_pcie.git;protocol=ssh;user=gitea;branch=master \
-           file://temporary-src-tree-fix-pcie.patch \
           "

 PV = "1.0+git${SRCPV}"
-SRCREV="6467938980a2829539419a94edfe1324025bbdfb"
+SRCREV = "b479888720835ae1a03c78531e08ff5f70e26b50"

 S = "${WORKDIR}/git"

--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/drivers/kernel-module-system-info_git.bb
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/drivers/kernel-module-system-info_git.bb
@ -7,7 +7,7 @@ SRC_URI = "git://git.netmodule.intranet/NRSW/system-info.git;protocol=ssh;user=g
           "

 PV = "1.0+git${SRCPV}"
-SRCREV="de1f2235bf182c14462a8b9178c8efd76a7ed943"
+SRCREV = "9ac224b6411758ec399518b0781659f1d8b7beb7"

 S = "${WORKDIR}/git"

--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-armada/0001-remove-redundant-YYLOC-declaration.patch
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-armada/0001-remove-redundant-YYLOC-declaration.patch
@ -0,0 +1,44 @@
+From 52c3ac31426131c555093542d51f1e6e0623507c Mon Sep 17 00:00:00 2001
+From: Marc Mattmueller <marc.mattmueller@netmodule.com>
+Date: Mon, 18 Jul 2022 19:26:59 +0200
+Subject: [PATCH] u-boot-armada: Remove redundant YYLOC global declaration
+
+Same as the upstream fix for building dtc with gcc 10.
+
+After having consulted the team, this patch is only applied to
+the armada bootloader as this one is used on the core os
+environment build-up.
+
+Signed-off-by: Marc Mattmueller <marc.mattmueller@netmodule.com>
+---
+ scripts/dtc/dtc-lexer.l             | 1 -
+ scripts/dtc/dtc-lexer.lex.c_shipped | 1 -
+ 2 files changed, 2 deletions(-)
+
+diff --git a/scripts/dtc/dtc-lexer.l b/scripts/dtc/dtc-lexer.l
+index fd825ebba6..24af549977 100644
+--- a/scripts/dtc/dtc-lexer.l
+++ b/scripts/dtc/dtc-lexer.l
+@@ -38,7 +38,6 @@ LINECOMMENT	"//".*\n
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */
+diff --git a/scripts/dtc/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped
+index 3934d8624d..22f6e0d1f8 100644
+--- a/scripts/dtc/dtc-lexer.lex.c_shipped
+++ b/scripts/dtc/dtc-lexer.lex.c_shipped
+@@ -639,7 +639,6 @@ char *yytext;
+ #include "srcpos.h"
+ #include "dtc-parser.tab.h"
+ 
+-YYLTYPE yylloc;
+ extern bool treesource_error;
+ 
+ /* CAUTION: this will stop working if we ever use yyless() or yyunput() */
+-- 
+2.20.1
+
--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-armada_git.bb
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-armada_git.bb
@ -0,0 +1,27 @@
+require u-boot-nm.inc
+
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot.git;protocol=ssh;user=gitea;branch=nrsw-armada-2017.11 \
+           file://0001-remove-redundant-YYLOC-declaration.patch;name=yylloc \
+"
+SRC_URI[yylloc.md5sum] = "504cb5b73a174a32e55c58f60608925d"
+
+DEPENDS += "bc-native"
+
+SRCREV = "2fe363eb69a360c9e9b6bd53dfdab32772b2f41a"
+
+
+UBOOT_SUFFIX = "kwb"
+UBOOT_BINARY = "u-boot-spl.${UBOOT_SUFFIX}"
+
+do_deploy() {
+    # xmodem files
+    cp ${B}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-u-boot-${MACHINE}.xmodem.bin
+    cp ${B}/u-boot.bin ${DEPLOYDIR}/u-boot-${MACHINE}.xmodem.bin
+
+    # file for wic file
+    cp ${B}/${UBOOT_BINARY} ${DEPLOYDIR}/u-boot-spl.${UBOOT_SUFFIX}
+
+    # file for user usage
+    cp ${B}/${UBOOT_BINARY} ${DEPLOYDIR}/u-boot-${MACHINE}.${UBOOT_SUFFIX}
+}
+
--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-nm.inc
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-nm.inc
@ -0,0 +1,19 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+do_configure[cleandirs] = "${B}"
+UBOOT_INITIAL_ENV = ""
+
+# This variable is set to "0" in distro in order to get reproducible build
+# It is however not needed for uboot and unsetting it allows us to keep the build date in uboot output
+unset SOURCE_DATE_EPOCH
+
+
+# CFLAGS are unset by u-boot.inc
+# The user flags should be passed by KCFLAGS, but for some reason, it does not work
+# KCCPFLAGS on the other hand also end in the actual cflags
+export KCPPFLAGS = "-DCONFIG_NRSW_BUILD"
--- a/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-ti33x_git.bb
+++ b/layers/meta-netmodule-legacy-bsp/recipes-bsp/u-boot/u-boot-ti33x_git.bb
@ -0,0 +1,22 @@
+require u-boot-nm.inc
+
+SRC_URI = "git://git.netmodule.intranet/nmrouter/u-boot.git;protocol=ssh;user=gitea;branch=nrsw-sitara-2016.04"
+
+SRCREV = "66fb8f8532ba174b14542c0c8a0245818df14f02"
+
+SPL_BINARY = "MLO"
+UBOOT_SUFFIX = "img"
+
+do_deploy() {
+    # xmodem files
+    cp ${B}/spl/u-boot-spl.bin ${DEPLOYDIR}/spl-u-boot-${MACHINE}.xmodem.bin
+    cp ${B}/u-boot.bin ${DEPLOYDIR}/u-boot-${MACHINE}.xmodem.bin
+
+    # files for wic file
+    cp ${B}/MLO ${DEPLOYDIR}/
+    cp ${B}/u-boot.img ${DEPLOYDIR}/
+
+    # files for user usage
+    cp ${B}/MLO ${DEPLOYDIR}/spl-u-boot-${MACHINE}.${UBOOT_SUFFIX}
+    cp ${B}/u-boot.img ${DEPLOYDIR}/u-boot-${MACHINE}.${UBOOT_SUFFIX}
+}
--- a/layers/meta-netmodule-legacy-bsp/recipes-kernel/linux/files/armada/defconfig
+++ b/layers/meta-netmodule-legacy-bsp/recipes-kernel/linux/files/armada/defconfig
@ -666,7 +666,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
+CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_CMDLINE_PARTITION is not set
 # end of Partition Types
--- a/layers/meta-netmodule-legacy-bsp/recipes-kernel/linux/files/sitara/defconfig
+++ b/layers/meta-netmodule-legacy-bsp/recipes-kernel/linux/files/sitara/defconfig
@ -669,7 +669,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
+CONFIG_EFI_PARTITION=y
 # CONFIG_SYSV68_PARTITION is not set
 # CONFIG_CMDLINE_PARTITION is not set
 # end of Partition Types
@ -1368,7 +1368,7 @@ CONFIG_GRO_CELLS=y
 CONFIG_NET_DEVLINK=y
 CONFIG_PAGE_POOL=y
 # CONFIG_FAILOVER is not set
-# CONFIG_ETHTOOL_NETLINK is not set
+CONFIG_ETHTOOL_NETLINK=y
 CONFIG_HAVE_EBPF_JIT=y

 #
--- a/layers/meta-netmodule-legacy-bsp/recipes-kernel/linux/linux-nrsw_git.bb
+++ b/layers/meta-netmodule-legacy-bsp/recipes-kernel/linux/linux-nrsw_git.bb
@ -20,7 +20,7 @@ KERNEL_VERSION_SANITY_SKIP="1"
 LINUX_VERSION = "5.15"
 LINUX_VERSION_EXTENSION = "-netmodule"

-SRCREV="15e5ac9e46205b7cf80efd72f957c83a76c84d67"
+SRCREV = "5a18cd05107545cb6f971c01126a13fc6a5d7eb6"

 PV = "${LINUX_VERSION}+git${SRCPV}"

--- a/layers/meta-netmodule-legacy-bsp/wic/nm-am335x-mmc.wks
+++ b/layers/meta-netmodule-legacy-bsp/wic/nm-am335x-mmc.wks
@ -0,0 +1,13 @@
+# Dual root partition for sitara devices
+
+part SPL --offset 256S --source rawcopy --sourceparams="file=MLO" --ondisk mmcblk1 --part-name "spl" --no-table
+part u-boot --offset 768S --source rawcopy --sourceparams="file=u-boot.img" --ondisk mmcblk1 --part-name "uboot0" --no-table
+part u-boot --offset 6912S --source rawcopy --sourceparams="file=u-boot.img" --ondisk mmcblk1 --part-name "uboot1" --no-table
+
+part / --source rootfs --fstype=ext4 --ondisk mmcblk1 --fixed-size 1G --label "rootfs0"
+part / --source rootfs --fstype=ext4 --ondisk mmcblk1 --fixed-size 1G --label "rootfs1"
+
+# Shared data partition to be extended on live system
+part /data --fstype=ext4 --ondisk mmcblk1 --size 100M --label "data" --part-name "data"
+
+bootloader --ptable gpt
--- a/layers/meta-netmodule-legacy-bsp/wic/nm-armada-385-mmc.wks
+++ b/layers/meta-netmodule-legacy-bsp/wic/nm-armada-385-mmc.wks
@ -0,0 +1,11 @@
+# Dual root partition for armada devices
+
+bootloader --ptable gpt
+
+part u-boot --source rawcopy --sourceparams="file=u-boot-spl.kwb" --ondisk mmcblk --no-table --align 384
+
+part / --source rootfs --fstype=ext4 --ondisk mmcblk0 --fixed-size 1G --label "rootfs0"
+part / --source rootfs --fstype=ext4 --ondisk mmcblk0 --fixed-size 1G --label "rootfs1"
+
+# Shared data partition
+part /data --fstype=ext4 --ondisk mmcblk0 --size 100M --label data
--- a/layers/meta-nwl-distro/classes/nwl-image.bbclass
+++ b/layers/meta-nwl-distro/classes/nwl-image.bbclass
@ -1,2 +1,7 @@
 # Base classe for all image based on NWL
+
 inherit coreos-image
+
+IMAGE_INSTALL:append = " \
+        packagegroup-nwl-core \
+"
--- a/layers/meta-nwl-distro/conf/distro/nwl.conf
+++ b/layers/meta-nwl-distro/conf/distro/nwl.conf
@ -13,14 +13,6 @@ MAINTAINER = "Netmodule Software Teams"
 DISTRO_VERSION = "2023.03"
 DISTRO_CODENAME = "NWL 2023 Edition (DRAFT)"

-# Use by default the in-tree developers set of keys for Secure Boot
-COREOS_EFI_SECUREBOOT_KEYDIR ?= "${NWL_ROOT}/layers/meta-nwl-distro/files/keys"
-
-# CoreOS ensure that COREOS_EFI_SECUREBOOT_KEYDIR has a vardep on the
-# hash of each used keys. We don't have to depends on the full path
-# to NWL_ROOT in the hash of COREOS_EFI_SECUREBOOT_KEYDIR
-COREOS_EFI_SECUREBOOT_KEYDIR[vardepsexclude] = "NWL_ROOT"
-
 # Here you can override settings from the CoreOS distro or from
 # OpenEmbedded-core. But keep in mind that the CoreOS team doesn't support
 # all the features of OpenEmbedded-Core. We have added some checks for some
@ -36,10 +28,21 @@ DISTRO_FEATURES:remove = "ptest virtualization"
 PACKAGECONFIG:pn-systemd = "usrmerge rfkill kmod timedated vconsole"
 # systemd-conf provides a packageconfig for a default dhcp client that we don't need
 PACKAGECONFIG:pn-systemd-conf = ""
-PACKAGECONFIG:pn-networkmanager = "systemd nss gnutls wifi bluez5 nmcli"
+PACKAGECONFIG:pn-networkmanager = "systemd nss gnutls wifi bluez5 nmcli modemmanager"
+# NetworkManager is starting dnsmasq when it needs it for AP mode
+SYSTEMD_AUTO_ENABLE:pn-dnsmasq = "disable"
+
 PACKAGECONFIG:pn-bluez5 = "systemd udev"

-# Wit busybox "less" the output of "nmcli c" does not show up properly
+# ModemManager is started by wwan-config
+SYSTEMD_AUTO_ENABLE:pn-modemmanager = "disable"
+PACKAGECONFIG:pn-modemmanager = "systemd qmi"
+EXTRA_OEMESON:pn-modemmanager = "-Dauto_features=disabled -Dplugin_generic=enabled"
+
+# Enable the python3 bindings for libgpiod
+PACKAGECONFIG:append:pn-libgpiod = " python3"
+
+# With busybox "less" the output of "nmcli c" does not show up properly
 RDEPENDS:networkmanager-nmcli += "less"


--- a/layers/meta-nwl-distro/files/keys/KEK.auth
+++ b/layers/meta-nwl-distro/files/keys/KEK.auth
--- a/layers/meta-nwl-distro/files/keys/KEK.crt
+++ b/layers/meta-nwl-distro/files/keys/KEK.crt
@ -1,19 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIDBzCCAe+gAwIBAgIUMBZqg8KVjLqv+5xzlrr//O78ys0wDQYJKoZIhvcNAQEL
-BQAwEzERMA8GA1UEAwwIVEVTVF9LRUswHhcNMjMwNzI2MDg0MDU2WhcNMjQwNzI1
-MDg0MDU2WjATMREwDwYDVQQDDAhURVNUX0tFSzCCASIwDQYJKoZIhvcNAQEBBQAD
-ggEPADCCAQoCggEBALVZOmvAVYvmOjMITsZiGlKfeafohprnKyC/MEttlceBzwEu
-DSXbvXaGpoaT+SsDkutcJIMkfVte4EEM7m7tmzfJT10++++saG7wzFRfn4qCiz7s
-NVGp7lSQGwPKlqToHtEc3n62Ni9/t2opMbjAMh4MigYmmhgRb0EjubnxkQi02oXQ
-b6vAMsqxsWgHTHQIqMQrMpWP+rxwVB2/0u4GfUvyROIP77gUweINaiaZFNwg5j/M
-HbNpE/YIzvOO1iiut7fGuRq8nzKsRa6v/5sQxpQCiFhEeW+L2TBBLWcn38HkGhZQ
-HL1wrMwIFnxhts+c/iXX/04hX7XLaE2VP8WbZq8CAwEAAaNTMFEwHQYDVR0OBBYE
-FGd2nYmDABv3X2xX5ChFTBGAPT9NMB8GA1UdIwQYMBaAFGd2nYmDABv3X2xX5ChF
-TBGAPT9NMA8GA1UdEwEB/wQFMAMBAf8wDQYJKoZIhvcNAQELBQADggEBAK+PrMYv
-/Riu59mNJBBg0IQ5Lg8njkZDJkTUNoPqfduxI8hShCVTazZTOUISrPCKvYWpti4r
-8OAuw/17vBcQzHa2ayJwaiKYL/xC94xxcMwZDsfIul/2TvMsUjh8Tbl6stVLhI5J
-Yga+ytHKkBvTw7whW7uqZAlynk1lkFlCuK5/rTD+WcZADat2kcXVw4ILUSP2QNIj
-HSW3q7YaerxUavPyUiYHTMmjMQtaqjvRv6AZaOFiPvl5/s0HIK2yfwGGyMbXgR/M
-70lqHtrgLORkAruWv35v16BBNaX1rQHholk+HIsjg1kTcjS5Tg9NAF1TAKH4G6LL
-YvNkqBtolbJKmjs=
-----END CERTIFICATE-----
--- a/layers/meta-nwl-distro/files/keys/KEK.der
+++ b/layers/meta-nwl-distro/files/keys/KEK.der
--- a/layers/meta-nwl-distro/files/keys/KEK.esl
+++ b/layers/meta-nwl-distro/files/keys/KEK.esl
--- a/layers/meta-nwl-distro/files/keys/KEK.key
+++ b/layers/meta-nwl-distro/files/keys/KEK.key
@ -1,28 +0,0 @@
-----BEGIN PRIVATE KEY-----
-MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQC1WTprwFWL5joz
-CE7GYhpSn3mn6Iaa5ysgvzBLbZXHgc8BLg0l2712hqaGk/krA5LrXCSDJH1bXuBB
-DO5u7Zs3yU9dPvvvrGhu8MxUX5+Kgos+7DVRqe5UkBsDypak6B7RHN5+tjYvf7dq
-KTG4wDIeDIoGJpoYEW9BI7m58ZEItNqF0G+rwDLKsbFoB0x0CKjEKzKVj/q8cFQd
-v9LuBn1L8kTiD++4FMHiDWommRTcIOY/zB2zaRP2CM7zjtYorre3xrkavJ8yrEWu
-r/+bEMaUAohYRHlvi9kwQS1nJ9/B5BoWUBy9cKzMCBZ8YbbPnP4l1/9OIV+1y2hN
-lT/Fm2avAgMBAAECggEAT5LwnJlPsEx8myn5Dvm7HSgXBMN2VQA8n2jlMyPJxjpC
-b/0aDdOnBhw9c+34NpSh4h6TcuwPCYnPExwuf4RJSKhP59WcTOW1CYEl15wB8JAp
-s5mIJ+ZNytNU10wM4B1ucEmfo7AmhJ8hBzc+Nxg2pZLQ+bP0h70WuVmIxHuoLU4X
-f+V3x0jl5Dgeh0L+j61b6jDYcQmVZmldugj+HxoyJPXZ3z3VcCBHzcX+JdA1YQtz
-9YwH6njxFUs6sTIWpavIphWy7oiulGhRj+8sU6cDpO932T0oLrvFVIPCM1yVSw+k
-h23wb8I20CN/qdjc8nk9uQ1kJfGhbEFCYq+QoQ6F+QKBgQD26N/yhslAVUH+tYQK
-gaQwYJMowj32b77WHIxnTSxmrCZ+Hjelpx57fuBilgvAJtlwxZpd8PJM8fUQff4S
-ob8YGrOg7qLzmtWLnx5VREYekLl6aHsOIlnaQLnsGUHEj6NQfn/2U4BRLv9G1zI+
-Y1SzwfX8QRFOFP9Q6tZXSd7A2wKBgQC8BnB/BmN2jqEgDF3eud+L6mAC5o7Jv/8X
-Xi1/w6OImzhm/poVb9pU5cFAZdzqJ9oIg78YAKERFHjfdLHtASZ1RF7DR2ysVxFC
-R5xPYMttmyfTE/umgIRLwkljMZ5ZTRNvPDkpT0n0BkXxs7D45XB7cEYPzgvUAhwb
-ezEKSc2fvQKBgFHBIgXn41NN56Ay8hmYe4kZMSDZ0DJ9Ja83nLXHs9/7OHOiBcLv
-5wP1Ks7558IkGvNgOpDIazJXG1HupeX9cIzGqpuq6IHIztSAR0bsaFtOiFujpLs1
-XJMLw4QNiN1Qwj6w5CXn2CEJcrU+JADMWwt6Obzgvp4gDbn5SCd26i7pAoGABpcP
-MFSP/eLH4PCuBZVsMWI4lUFxdb7F+RKy84xu2eXe1zVLPz8ZXupimJg5Yvecm7nK
-Y9P50ThveB2F8vGcYHXSAHQraervTuxlnR6eYqwSfEJyCobsnB8mJVTi4Oxjpv1s
-X3dI90WVBACxTjf0dk8cFYe6QGcGhywNLvghPd0CgYEAwHu7S16k/+5JL81QrJMS
-lGUxdJ7xgPZp6G2lnzHKrumUXsE7u9efB3t5RauDX51dLOqaJGzoTVF403Cx/Xps
-kWkWiN8r7g22gHvYWO43mvVyGZ+VUsu5D50gndaDdoCfWoHRZ6UbBPdhAztI/ePU
-kUM2jC74IiCINRyszkcfEUw=
-----END PRIVATE KEY-----
--- a/layers/meta-nwl-distro/files/keys/PK.auth
+++ b/layers/meta-nwl-distro/files/keys/PK.auth
--- a/layers/meta-nwl-distro/files/keys/PK.crt
+++ b/layers/meta-nwl-distro/files/keys/PK.crt
@ -1,19 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIDBTCCAe2gAwIBAgIUaqd3t7MrDxsQCyBIp+ldFIexS+YwDQYJKoZIhvcNAQEL
-BQAwEjEQMA4GA1UEAwwHVEVTVF9QSzAeFw0yMzA3MjYwODQwNTZaFw0yNDA3MjUw
-ODQwNTZaMBIxEDAOBgNVBAMMB1RFU1RfUEswggEiMA0GCSqGSIb3DQEBAQUAA4IB
-DwAwggEKAoIBAQDio1QgioSSx8tzr2YfYFxwxMZvONXTBgyEo1qH9eVnDhd/nN66
-odj0JOWQ6ZxZ1thAA94M0k9uNM60AYd4IPJfIok//MQbICzKbpSp8sTePBui2dxx
-/Su3lkNim9ZkQ5hjbJHhogzF31DfSRhUej9mr5yzDjD+liGtvRKbLZ4RCEx3WeDn
-taS3YojRNBXoNKumr/e6m+qACh9lOswAgAFw0FvS6v5j3y2AzBhL76pBNJ2+phzv
-uDk2xFGz5Hwa2JnjdwbjFJTGMpHRoI8m9PCM9fTAXmgwTaXgP3/6d4HgxHyIyNMK
-oPkPUp26CxpXeP+x6XfHlcUZdE3Agg4TTmaBAgMBAAGjUzBRMB0GA1UdDgQWBBSh
-s2prPUwajZ++I9D8NqQprrUlPTAfBgNVHSMEGDAWgBShs2prPUwajZ++I9D8NqQp
-rrUlPTAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEBCwUAA4IBAQBBhsVJzuy2
-BMJft7nzLjplh5234R03/YMieMG3ryOclPaAj8nuEkIRzgE3uJdS/121T2A5wReW
-Pg6o21bPGljXHHGFS6Xh2bav3WLWtB8G2HXQ5xum0sXcj58cNc3DGEq/ECDT+wcX
-Y2RL3RHMZflSndXtcGnqT+9PrgCKaNaxtrIoIWk8SI6p2LEcHbidDiEJ5JHvUr4r
-BWhLsgKmoGCDQsOPAz6ZXZPR34VF56BAVBLAJPymFiV5O/GGL99UfHhEXBO5kPt3
-ha1iPedOfxge+nRuGYxlGF0bcA7gZhPPzuy5rZSTZtXaNMWf8/Hteo18muX3aDqr
-ekkVlpgnXEeJ
-----END CERTIFICATE-----
--- a/layers/meta-nwl-distro/files/keys/PK.der
+++ b/layers/meta-nwl-distro/files/keys/PK.der
--- a/layers/meta-nwl-distro/files/keys/PK.esl
+++ b/layers/meta-nwl-distro/files/keys/PK.esl
--- a/layers/meta-nwl-distro/files/keys/PK.key
+++ b/layers/meta-nwl-distro/files/keys/PK.key
@ -1,28 +0,0 @@
-----BEGIN PRIVATE KEY-----
-MIIEvgIBADANBgkqhkiG9w0BAQEFAASCBKgwggSkAgEAAoIBAQDio1QgioSSx8tz
-r2YfYFxwxMZvONXTBgyEo1qH9eVnDhd/nN66odj0JOWQ6ZxZ1thAA94M0k9uNM60
-AYd4IPJfIok//MQbICzKbpSp8sTePBui2dxx/Su3lkNim9ZkQ5hjbJHhogzF31Df
-SRhUej9mr5yzDjD+liGtvRKbLZ4RCEx3WeDntaS3YojRNBXoNKumr/e6m+qACh9l
-OswAgAFw0FvS6v5j3y2AzBhL76pBNJ2+phzvuDk2xFGz5Hwa2JnjdwbjFJTGMpHR
-oI8m9PCM9fTAXmgwTaXgP3/6d4HgxHyIyNMKoPkPUp26CxpXeP+x6XfHlcUZdE3A
-gg4TTmaBAgMBAAECggEAKzOAC03sNICCPzSNjmiTZmmT+8qFM9sA0t3CmY0dY/YT
-M5+m80N7tBo+ak+lnphuE1HJZ39FZdgKGNT7ykHZgZn3OKvJg/QvpYzLqNOehFBH
-4lSOCWp9hVrO0IKtLOKXr0gYTL7TmXpWk6F+0keVQ1ExWQ5Y94aNt+0FGXBqI4uq
-ENDH3UfFIIZjtoyO4xLa3FBqj19lNsj/RIGAo/H2RgOUAIoG8N6uHBszROd48w1H
-CUgdtCCL1YE2zoDcAcmFTUFI1KA6y5t7n248ZRkRlDZVeeGDSCcH9zFkiy41Vpct
-Ej7BPdCU/t6F3axqXahtkDAAuRKfWjytoVa8iekX0wKBgQD2k0oee/4qaIv5M0Xx
-ZNRcptMCkmX354XfFcWMgLchK1oloZNtLjvntgXmiK6jAGCR8yG1NWFwOB2vhgE0
-UuqU+Ah4JMJHivYVlqhUzFVASYt1XLIrxglHDVq05gfkMjUwVUavB90KPHXwLTJE
-/5iMvyBO7NCJxGXtnwsKw5fKhwKBgQDrTPRbibb1BSCDSCTZHoyVYxTFX5Tyuas3
-Wu2bRmTWo/RsZHhAumemlOIjX/6gRMn2SYAvH4j7V9+V4SFprrajEDQaACwYbRP8
-31yaUAUPbx4b1VgCY0XVS6CCExQOVQdT9YsQueNcmhZ2HU/aELN0InMSwyf+9F90
-vEGU79ZgtwKBgBcw+0OqvdkXRDMIE4gEx8R/HFGdm2GZsQmuboosgQzpmuz3KXqX
-YqMEh8GLEYHbQzn2+DCm+KcpYAFmRS66rb2dJo7GRk+cTlDxfpubLFmDkU5UjZ14
-Xt8D7ogdKpjX8BC/tIo53xxbW2xfk97Re3OhdlR2CZcrlbqnvs4gX2J5AoGBALeM
-oTVi2SCLLlCaj3v7E6lY0BQjOnqZkVEuEhnFMNYqsXl4akH75u0QSNNVh7gX0P/Z
-WC/qRp3ib1xocPsSug+7jRkXN06akDP7PS5262udv3vw0aWTMR9wzjWJkmSXuY6q
-BSA4EX7kCE99EBRIYORgFyn0qJd+o5PZYsM+0BlDAoGBALCEcSsZYWAX+k6/6EsA
-kax0KscOFHji62PSLuWJX7PdLyGeAFnIKfm6X/RKXTInH+1dLJI/BXPuxrKIQFjB
-CUrhmcwdSZ690mQLogT1tFAAt4+FfdGn8cnlPn9r8je/+6AR4sHUkbDTUJgBE3YG
-/OVVo+MW242kcym893qgkPS/
-----END PRIVATE KEY-----
--- a/layers/meta-nwl-distro/files/keys/db.auth
+++ b/layers/meta-nwl-distro/files/keys/db.auth
--- a/layers/meta-nwl-distro/files/keys/db.crt
+++ b/layers/meta-nwl-distro/files/keys/db.crt
@ -1,19 +0,0 @@
-----BEGIN CERTIFICATE-----
-MIIDBTCCAe2gAwIBAgIUL8w6OMWe5milePbOVue9IyI4pG4wDQYJKoZIhvcNAQEL
-BQAwEjEQMA4GA1UEAwwHVEVTVF9kYjAeFw0yMzA3MjYwODQwNTZaFw0yNDA3MjUw
-ODQwNTZaMBIxEDAOBgNVBAMMB1RFU1RfZGIwggEiMA0GCSqGSIb3DQEBAQUAA4IB
-DwAwggEKAoIBAQCbGXtPx/xRCDHqPkUSC/g08eH4IQHW2ku7IJwGd3MOfB+hMLVN
-YSMNNx2ltFguPm+bh1rDsT+6Lq+RiXf++KXjzpy7ShRyBQ6Xjy5hfz0hR6CtDonG
-RpBmndgwl2yUVhpdgD0BZzhqO5OzmONqZpP968yIRts7Xl1zF2Z63/EiWdOY5m6Y
-WaE3inRr2W0GttJ55eqVFeBRTX2tASyrh+b1NvWlo52phs/EAb2CCE+cUC82S68Q
-tMsyvIGGNRiBr9tQ5x9rRtPIens8AK9/H9K8rG+ldXcAsop8C4SvQg+hBW8ViHEu
-9EQ1c9N3vA+KE3IP91jvRMP3HONxDWok4pjXAgMBAAGjUzBRMB0GA1UdDgQWBBRl
-oRIc0AjAlJG4xzJAYA3RqoPVAzAfBgNVHSMEGDAWgBRloRIc0AjAlJG4xzJAYA3R
-qoPVAzAPBgNVHRMBAf8EBTADAQH/MA0GCSqGSIb3DQEBCwUAA4IBAQBCnMDK+noa
-oYJZZ4H1dvqnjAk2C9Wy2UpeNbM6igFRQUgK6W/4WbUDeHktVB2/X5CqwYJxLC+Y
-S1qNVUiabS4MuuXfGCdvJIcPRUcnx1RIUQL2VpE7I9Z1LQ1qAvJt5Bx1eyKdy/+O
-wYMHQAAcd7lQuwnFLtOgHrOqHOtcp8jiltCoivEIyc+RyZrhq+w8xkZOvhIJ+Nxv
-lo41xQKcXHU1bVV7O0FEyFv7Sj+VRo/Os2Eesk1mEYDiqYfF2mEvFnY+tj8e7jxJ
-N9lRS7mb/5iBObZp6sv2y4afJfzAXDPEt7QVMDORjUqPHhIlkjCpE0/AIwbJVnvd
-5x4tiZjDcVZZ
-----END CERTIFICATE-----
--- a/layers/meta-nwl-distro/files/keys/db.der
+++ b/layers/meta-nwl-distro/files/keys/db.der
--- a/layers/meta-nwl-distro/files/keys/db.esl
+++ b/layers/meta-nwl-distro/files/keys/db.esl
--- a/layers/meta-nwl-distro/files/keys/db.key
+++ b/layers/meta-nwl-distro/files/keys/db.key
@ -1,28 +0,0 @@
-----BEGIN PRIVATE KEY-----
-MIIEvQIBADANBgkqhkiG9w0BAQEFAASCBKcwggSjAgEAAoIBAQCbGXtPx/xRCDHq
-PkUSC/g08eH4IQHW2ku7IJwGd3MOfB+hMLVNYSMNNx2ltFguPm+bh1rDsT+6Lq+R
-iXf++KXjzpy7ShRyBQ6Xjy5hfz0hR6CtDonGRpBmndgwl2yUVhpdgD0BZzhqO5Oz
-mONqZpP968yIRts7Xl1zF2Z63/EiWdOY5m6YWaE3inRr2W0GttJ55eqVFeBRTX2t
-ASyrh+b1NvWlo52phs/EAb2CCE+cUC82S68QtMsyvIGGNRiBr9tQ5x9rRtPIens8
-AK9/H9K8rG+ldXcAsop8C4SvQg+hBW8ViHEu9EQ1c9N3vA+KE3IP91jvRMP3HONx
-DWok4pjXAgMBAAECggEAORiyWnZmnnYD2hW+W5xobSU2aJ/OC4glJOgmSAMlKgnr
-ou1JcQj3XGAT2/J+G9gEQh8b/Lp9mU6id1NCB20FtM1UyWXGDQtricO98Upj+KJj
-thGKCqHjesNU2N6FrD3eStlwm9mh3Qm9n/oCjiLhDDMIAosDHeHpSPsuUMGsBVa0
-zDcmcpujgb/aHWw5Iy9yy2Po+M4X2faLljZWwwFvgBDhftlVRGyZOwuUc+TxL6/v
-HEmYGhsDiEle6XiqcV0hVt0obeic7yxQOPEahWbwLdLjrO+Wx1GaTsxbwfqLWU0g
-ut8Te8+8RJiZGdT2mbtbkGiXrN2CbcPfkCvuzDE/UQKBgQDaLtEus8s6tVo9lvh/
-phtb0mwY9dQ7gekrbjVmlHl1Yrtc4UTP4u1MwKu1B8t6Oe0s3i2iYtre2z1F6MmR
-cr1wweN4PNAZ5/6jwsTDDfUEAWPq+vriics5YmyCL9nLaBk4b7/3TZNpmBn/UuOu
-JpFeAhLC3QG9XubHF0mEcKPicwKBgQC1+4ng0jg3jQofTdx29yDND5q1ftbZHx5Q
-n9g4gR8Y9Gr8ETox3GVfiKTAIzaE53UfzEHpEmj756XdggxZIkNvHxWoIAsEEiwY
-nI3ztz9rIQfx+10FVY9VrgTZDDYlv9NMcUg6cEuGbH0lKiZoqRLyVcqGWgWTF2Qg
-gnll54RDDQKBgF3aK7M6Nd6gKhw6N9S5ACXEYyltfYjHfiRneOMSVRjQiqYOZMpD
-5C3S50ms+7Ms/cACJoEmot2gU0AiPaqqP6EkVhPfnOi36cpJutfoxg+eBXwL0CXo
-fhnGI8TwjnA37DlhoKLhpNqUSgKRhkzgXEGjBKz74oayLvVPKBmnVmfPAoGAditM
-MMzQ7GGNPR6WFjoK9p03XLtsT7jBOqFRCf/ubYnpHp0hKNdwjERylsFG2a5ig69i
-7TGjMlANiHS2B/sTxshsi6ui+5XBRIoEM0m+yJW+TwdmM9yHIp/JThd74a9aSb0V
-pbzdjgBMkyF3p2aCgxHqXKuACy+ZOPMAWYeoftECgYEAjKEUKfsZIZfgHicZYxbZ
-gVrIG/ifGKpzPdFYtR2Yq0F7/ECrKf4VRRpfVbs+KPOfaSYtlE400MecOgLsxK76
-LMaSsuJB/YURrUjjR7O5orupVAlIG8tblBiAwx5VAsFTfyw4WVcHP+AJ+kYUuCB0
-JriD7XK6yHORwPka9yD+SYg=
-----END PRIVATE KEY-----
--- a/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config.bb
+++ b/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config.bb
@ -0,0 +1,69 @@
+DESCRIPTION = "WWAN modems configuration tool"
+LICENSE = "Proprietary"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/Proprietary;md5=0557f9d92cf58f2ccdd50f62f8ac0b28"
+
+RDEPENDS:${PN} += " \
+    python3-pyserial \
+    libgpiod-python \
+    python3-setuptools \
+    python3-systemd \
+    lmsensors-sensors \
+    lmsensors-config-libsensors \
+    "
+
+DEPENDS = "python3-setuptools-scm-native"
+
+inherit gitpkgv systemd allarch
+
+
+# Package Version (built from tags)
+PKGV = "${GITPKGVTAG}"
+# Recipe Version
+PV = "1.0-git${SRCPV}"
+
+PR = "r1"
+
+SRCREV = "a943fa76d5385c3f9bc54023c6fcf8b7bf339fd1"
+SRC_URI = "git://gitlab.com/netmodule/tools/wwan-config.git;protocol=ssh;user=git;branch=master \
+           file://wwan-config@.service \
+           file://default.conf \
+           file://0001-Hotfixes-for-gemini.patch \
+           file://0002-hotfix-for-kirkstone.patch \
+           "
+
+S = "${WORKDIR}/git"
+
+inherit setuptools3_legacy
+
+# Should be set by machine.conf
+WWAN_NBR ??= "1"
+
+do_install:append() {
+    install -d ${D}/${systemd_unitdir}/system/
+    install -m 0644 ${WORKDIR}/wwan-config@.service ${D}/${systemd_unitdir}/system/
+
+    install -d ${D}/${sysconfdir}/wwan
+    if [ ! -z "${WWAN_NBR}" ] ; then
+        install -d ${D}${sysconfdir}/systemd/system/multi-user.target.requires/
+        for i in `seq 0 ${WWAN_NBR}`; do
+            if [ $i = ${WWAN_NBR} ]; then continue; fi
+
+            if [ "${SYSTEMD_AUTO_ENABLE}" = "enable" ] ; then
+                ln -sf ${systemd_unitdir}/system/wwan-config@.service \
+                    ${D}${sysconfdir}/systemd/system/multi-user.target.requires/wwan-config@wwan$i.service
+            fi
+
+            install -m 0644 ${WORKDIR}/default.conf ${D}${sysconfdir}/wwan/wwan$i.conf
+            if [ ! -z "${NM_WWAN_APN}" ]; then
+                sed -i 's/apn=/apn=${NM_WWAN_APN}/g' ${D}${sysconfdir}/wwan/wwan$i.conf
+            fi
+            if [ ! -z "${NM_WWAN_USER}" ]; then
+                sed -i 's/user=/user=${NM_WWAN_USER}/g' ${D}${sysconfdir}/wwan/wwan$i.conf
+            fi
+            if [ ! -z "${NM_WWAN_PASSWORD}" ]; then
+                sed -i 's/password=/password=${NM_WWAN_PASSWORD}/g' ${D}${sysconfdir}/wwan/wwan$i.conf
+            fi
+        done
+    fi
+}
+
--- a/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/0001-Hotfixes-for-gemini.patch
+++ b/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/0001-Hotfixes-for-gemini.patch
@ -0,0 +1,68 @@
+From 3ffd1a9c0b42c32e720f05b36b6b837fb1ea8c46 Mon Sep 17 00:00:00 2001
+From: Alexandre Bard <alexandre.bard@netmodule.com>
+Date: Thu, 22 Feb 2024 17:21:09 +0100
+Subject: [PATCH] Hotfixes for gemini
+
+- Handling HUB_RST and GSM_RST lines
+- Using GSM_EN instead of GSM_PWR
+- Using gpio line EXT_SUPPLY_EN0 instead of "kernel" supply
+
+Signed-off-by: Alexandre Bard <alexandre.bard@netmodule.com>
+---
+ wwan_config/modems/wwan_modem.py | 28 +++++++++++++++++++++++-----
+ 1 file changed, 23 insertions(+), 5 deletions(-)
+
+diff --git a/wwan_config/modems/wwan_modem.py b/wwan_config/modems/wwan_modem.py
+index 710ec76..cc12a53 100755
+--- a/wwan_config/modems/wwan_modem.py
+++ b/wwan_config/modems/wwan_modem.py
+@@ -25,8 +25,24 @@ class WwanModem:
+ 
+     def __init__(self, device_name):
+         self.name = device_name
+-        self.pwr_line = gpiod.find_line('GSM_PWR')
+
+        # Start by disabling the power supply
+        self.supply_line = gpiod.find_line('EXT_SUPPLY_EN0')
+        self.supply_line.request(consumer=self.name, type=gpiod.LINE_REQ_DIR_OUT, default_vals=[0])
+
+        # Release all RST lines
+        self.hub_rst_line = gpiod.find_line('HUB_RST~')
+        self.hub_rst_line.request(consumer=self.name, type=gpiod.LINE_REQ_DIR_OUT, default_vals=[1])
+
+        self.rst_line = gpiod.find_line('GSM_RST')
+        self.rst_line.request(consumer=self.name, type=gpiod.LINE_REQ_DIR_OUT, default_vals=[0])
+
+
+        # Prepare the the PWR line for the pulse
+        self.pwr_line = gpiod.find_line('GSM_EN')
+         self.pwr_line.request(consumer=self.name, type=gpiod.LINE_REQ_DIR_OUT, default_vals=[0])
+        time.sleep(1)
+
+ 
+         while True:
+             try:
+@@ -34,7 +50,11 @@ class WwanModem:
+                 break
+             except ModemNotPoweredException as e:
+                 logger.error("The modem did not power up, turning power off and on again")
+-                self.power_down()
+                try:
+                    self.power_down()
+                except PwrNotControllableException as e:
+                    logger.error("The power cannot be controlled, not shutting down, the only we can do is wait...");
+
+                 # Make sure the power is down long enough to avoid a glitch
+                 # With toby-l2 this down time must be at least 130ms
+                 time.sleep(1)
+@@ -158,9 +178,7 @@ class WwanModem:
+                 raise ModemNotPoweredException()
+ 
+     def set_pwr_state(self, value):
+-        state = "enabled" if value == 1 else "disabled"
+-        with open("/sys/devices/platform/" + self.name + "-supply/state", "w") as supply_file:
+-            supply_file.write(state + "\n")
+        self.supply_line.set_value(value)
+ 
+     def power_up(self):
+         logger.info("modem power up")
--- a/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/0002-hotfix-for-kirkstone.patch
+++ b/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/0002-hotfix-for-kirkstone.patch
@ -0,0 +1,26 @@
+From a2b92fb896bdf2c5579676f05df4fcc7c488d94f Mon Sep 17 00:00:00 2001
+From: Alexandre Bard <alexandre.bard@netmodule.com>
+Date: Thu, 22 Feb 2024 17:28:56 +0100
+Subject: [PATCH] hotfix for kirkstone
+
+With the upgrade from dunfell to kirkstone, setuptools-git-version does
+not exists anymore.
+
+Signed-off-by: Alexandre Bard <alexandre.bard@netmodule.com>
+---
+ setup.py | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/setup.py b/setup.py
+index 8009e49..88415ae 100755
+--- a/setup.py
+++ b/setup.py
+@@ -5,7 +5,7 @@ from setuptools import setup, find_packages
+ setup(
+     name='wwan_config',
+     version_format='{tag}.{commitcount}+{gitsha}',
+-    setup_requires=['setuptools-git-version'],
+    setup_requires=['setuptools-scm'],
+     description='WWAN modem configurator',
+     author='Alexandre Bard',
+     author_email='alexandre.bard@netmodule.com',
--- a/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/default.conf
+++ b/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/default.conf
@ -0,0 +1,51 @@
+#
+# This file is part of wwan-config service
+#
+
+# Define a private APN to be used by the modem
+#  ! ONLY REQUIRED WHEN USING UBLOX TOBY-L2, will be ignored for other modems
+#
+# Required fields:
+#     apn:      Name of the access point
+#     user:     Username used to authenticate on APN
+#     password: Password used to authenticate on APN
+#
+
+
+[apn]
+apn=
+user=
+password=
+
+
+#
+# Select the SIM card to be used by the modem
+#
+# auto: The script will detect if a physical SIM card is
+#       present and switch to eSIM if it is not the case
+# sim1: Use the physical SIM card on the main board
+# m2m: Use the eSIM of the main board
+# ui-top: Use the SIM card that is on top of the User Interface
+# ui-btm: Use the SIM card that is on the bottom of the User Interface
+#
+
+[sim]
+SIM=auto
+
+
+#
+# ublox specific configurations:
+#
+# mode (+UBMCONF) :
+#  - Router : The modem will act as router and DHCP server.
+#  - Bridge : The modem will only act as a Bridge between the local and the GSM network.
+#
+# usb_profile (+UUSBCONF) :
+#  ! ONLY USED WITH TOBY-L2, will be ignored for other modems
+#  Select between different network/usb interfaces :
+#  - RNDIS
+#  - ECM
+#
+[ublox]
+mode=Bridge
+usb_profile=ECM
--- a/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/wwan-config@.service
+++ b/layers/meta-nwl-distro/recipes-connectivity/wwan-config/wwan-config/wwan-config@.service
@ -0,0 +1,18 @@
+[Unit]
+Description=WWAN configurator for device %I
+
+[Service]
+Type=forking
+ExecStart=/usr/bin/wwan-config %I
+PIDFile=/run/%I.pid
+Restart=on-failure
+Nice=-20
+# Start time may include power cycles and start of ModemManager
+TimeoutStartSec=180
+# The default kill mode is killing the subprocesses created by the "os.system"
+# calls used to stop ModemManager when handling the kill signal.
+KillMode=mixed
+
+[Install]
+RequiredBy=multi-user.target
+
--- a/layers/meta-nwl-distro/recipes-core/images/nwl-ramdisk-minimal.bb
+++ b/layers/meta-nwl-distro/recipes-core/images/nwl-ramdisk-minimal.bb
@ -17,24 +17,11 @@ IMAGE_FSTYPES = "cpio.xz"
 # Keep only the minimum packages
 NO_RECOMMENDATIONS = "1"

-TI_WIFI_PACKAGES = " \
-	firmware-ti-wl18xx \
-	"
-
-WIFI_PACKAGES = " \
-	${@bb.utils.contains("MACHINE_FEATURES", "ti-wifi", "${TI_WIFI_PACKAGES}", "", d)} \
-	"
+EXTRA_IMAGE_FEATURES = "debug-tweaks ssh-server"

 IMAGE_INSTALL:append = " \
-	coreutils \
-	ncurses-terminfo-base \
-	kernel-module-board-descriptor \
-	kernel-module-system-info \
-	kernel-module-pcie \
-	\
-	networkmanager-nmcli \
-	systemd-conf \
 	nwl-tests \
 	\
-	${@bb.utils.contains("MACHINE_FEATURES", "wifi", "${WIFI_PACKAGES}", "", d)} \
+	bmap-tools \
+	xz \
 	"
--- a/layers/meta-nwl-distro/recipes-core/images/nwl-test-image.bb
+++ b/layers/meta-nwl-distro/recipes-core/images/nwl-test-image.bb
@ -12,6 +12,22 @@ inherit nwl-image
 # NWL specific files can be added as well:
 # COREOS_CI_DEPLOY_ARTIFACTS += "${IMAGE_LINK_NAME}.custom.binary"

+# Components required by uboot to boot an installed image
+IMAGE_INSTALL:append = "\
+	kernel-devicetree \
+	${@bb.utils.contains('MACHINE_FEATURES', 'fpga', 'fpga-image', '', d)} \
+"
+
 # Add features and packages that are used in our tests:
 IMAGE_FEATURES += "ssh-server networkmanager swupdate"
-IMAGE_INSTALL:append = " packagegroup-core-full-cmdline swupdate-www"
+IMAGE_INSTALL:append = " \
+	packagegroup-core-full-cmdline \
+	swupdate-www \
+	nwl-tests \
+	packagegroup-nwl-test-tools \
+	"
+
+
+
+
+IMAGE_FSTYPES += "wic.xz wic.bmap"
--- a/layers/meta-nwl-distro/recipes-core/packagegroups/packagegroup-nwl-core.bb
+++ b/layers/meta-nwl-distro/recipes-core/packagegroups/packagegroup-nwl-core.bb
@ -0,0 +1,33 @@
+inherit packagegroup
+
+DESCRIPTION = "Base packages required for the NWL Distro"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+
+NRSW_MODULES = " \
+	kernel-module-board-descriptor \
+	kernel-module-system-info \
+	kernel-module-pcie \
+"
+
+TI_WIFI_PACKAGES = " \
+	firmware-ti-wl18xx \
+	"
+
+WIFI_PACKAGES = " \
+	${@bb.utils.contains("MACHINE_FEATURES", "ti-wifi", "${TI_WIFI_PACKAGES}", "", d)} \
+	"
+
+RDEPENDS:${PN} = " \
+	coreutils \
+	ncurses-terminfo-base \
+	networkmanager-nmcli \
+	dnsmasq \
+	systemd-conf \
+	\
+	kernel-modules \
+	${@bb.utils.contains("MACHINE_FEATURES", "nrsw-ready", "${NRSW_MODULES}", "", d)} \
+	\
+	${@bb.utils.contains("MACHINE_FEATURES", "wifi", "${WIFI_PACKAGES}", "", d)} \
+"
--- a/layers/meta-nwl-distro/recipes-core/packagegroups/packagegroup-nwl-test-tools.bb
+++ b/layers/meta-nwl-distro/recipes-core/packagegroups/packagegroup-nwl-test-tools.bb
@ -0,0 +1,24 @@
+inherit packagegroup
+
+DESCRIPTION = "Common tools convenient for testing the features of NWL"
+
+
+RDEPENDS:${PN} = " \
+	hostapd \
+	\
+	gps-utils \
+	\
+	can-utils \
+	\
+	libgpiod-tools \
+	\
+	chrony \
+	minicom \
+	\
+	udev-rules-nmhw \
+	\
+	modemmanager \
+	wwan-config \
+	\
+	gnss-mgr \
+"
--- a/layers/meta-nwl-distro/recipes-core/udev/udev-rules-nmhw_git.bb
+++ b/layers/meta-nwl-distro/recipes-core/udev/udev-rules-nmhw_git.bb
@ -0,0 +1,25 @@
+# Copyright (C) 2019 Ramon Moesching <ramon.moesching@netmodule.com>
+# Released under the MIT license (see COPYING.MIT for the terms)
+
+DESCRIPTION = "udev rules for netmodule router and oem hardware"
+HOMEPAGE = "netmodule.com"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/MIT;md5=0835ade698e0bcf8506ecda2f7b4f302"
+
+SECTION = "base"
+
+S = "${WORKDIR}/git"
+
+SRC_URI = "git://gitlab.com/netmodule/tools/udev-rules-nmhw;protocol=ssh;user=git;branch=master;"
+SRCREV = "e2fe34ea2d0c1ebd08d26bf90197b5625765e242"
+
+do_install () {
+    install -d ${D}${libdir}/udev/rules.d
+
+    if ls ${S}/machines/${MACHINE}/*.rules 1> /dev/null 2>&1 ; then
+       install -m 0644 ${S}/machines/${MACHINE}/*.rules ${D}${libdir}/udev/rules.d/
+       if [ -f ${S}/machines/${MACHINE}/*.sh ]; then
+           install -m 0755 ${S}/machines/${MACHINE}/*.sh ${D}${libdir}/udev/rules.d/
+       fi
+    fi
+}
--- a/layers/meta-nwl-distro/recipes-navigation/gnss-mgr/gnss-mgr.bb
+++ b/layers/meta-nwl-distro/recipes-navigation/gnss-mgr/gnss-mgr.bb
@ -0,0 +1,51 @@
+DESCRIPTION = "NetModule GNSS management tool"
+LICENSE = "LGPL-3.0-only"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=3000208d539ec061b899bce1d9ce9404"
+
+RDEPENDS:${PN} += " \
+    python3-setuptools \
+    nmubxlib \
+    python3-systemd \
+    "
+
+DEPENDS = "python3-setuptools-scm-native"
+
+inherit setuptools3
+inherit gitpkgv
+
+inherit systemd
+SYSTEMD_SERVICE:${PN} = "gnss-mgr.service"
+
+inherit allarch
+
+# Package Version (built from tags)
+PKGV = "${GITPKGVTAG}"
+# Recipe Version
+PV = "1.0-git${SRCPV}"
+PR = "r1"
+
+SRC_URI = "git://gitlab.com/netmodule/tools/gnssmgr.git;protocol=ssh;user=git;branch=master \
+           file://0001-setup.py-Make-compatible-with-kirkstone.patch \
+           file://0002-gnss-mgr.service-Hotfix-for-gemini.patch \
+           "
+SRCREV = "3d80bb4871ddc2e3e84553a86b767b419b96148f"
+S = "${WORKDIR}/git"
+
+PACKAGES =+ "${PN}-test"
+SUMMARY:${PN}-test = "Addon to gnss-mgr for testing purposes"
+FILES:${PN}-test = "${bindir}/gnss-config-reader"
+
+do_install:append() {
+    install -d ${D}${sysconfdir}/gnss
+    install -m 0644 ${S}/config/gnss-neom8.conf ${D}${sysconfdir}/gnss/gnss0.conf
+
+    install -d ${D}/${sbindir}/
+    install -m 0755 ${S}/systemd/gnss-mgr-service.py ${D}${sbindir}/gnss-mgr-service
+
+    install -d ${D}/${systemd_unitdir}/system/
+    install -m 0644 ${S}/systemd/gnss-mgr.service ${D}/${systemd_unitdir}/system/
+
+    # Test tool
+    install -d ${D}${bindir}/
+    install -m 0755 ${S}/testing/gnss-config-reader.py ${D}${bindir}/gnss-config-reader
+}
--- a/layers/meta-nwl-distro/recipes-navigation/gnss-mgr/gnss-mgr/0001-setup.py-Make-compatible-with-kirkstone.patch
+++ b/layers/meta-nwl-distro/recipes-navigation/gnss-mgr/gnss-mgr/0001-setup.py-Make-compatible-with-kirkstone.patch
@ -0,0 +1,23 @@
+From e1dc9e6a5e683dd8ed09a319d06ef0be8d0022cb Mon Sep 17 00:00:00 2001
+From: Alexandre Bard <alexandre.bard@netmodule.com>
+Date: Tue, 27 Feb 2024 11:33:39 +0100
+Subject: [PATCH] setup.py: Make compatible with kirkstone
+
+Signed-off-by: Alexandre Bard <alexandre.bard@netmodule.com>
+---
+ setup.py | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/setup.py b/setup.py
+index 8d3714e..cda325e 100644
+--- a/setup.py
+++ b/setup.py
+@@ -5,7 +5,7 @@ from setuptools import setup, find_packages
+ setup(
+     name='gnss_mgr',
+     version_format='{tag}.{commitcount}+{gitsha}',
+-    setup_requires=['setuptools-git-version'],
+    setup_requires=['setuptools-scm'],
+     description='GNSS Manager',
+     author='Marc Mattmüller',
+     author_email='marc.mattmueller@netmodule.com',
--- a/layers/meta-nwl-distro/recipes-navigation/gnss-mgr/gnss-mgr/0002-gnss-mgr.service-Hotfix-for-gemini.patch
+++ b/layers/meta-nwl-distro/recipes-navigation/gnss-mgr/gnss-mgr/0002-gnss-mgr.service-Hotfix-for-gemini.patch
@ -0,0 +1,34 @@
+From 88eb6099cecfaa344dee3cacec54db0cd24f542f Mon Sep 17 00:00:00 2001
+From: Alexandre Bard <alexandre.bard@netmodule.com>
+Date: Thu, 29 Feb 2024 15:03:02 +0100
+Subject: [PATCH] gnss-mgr.service: Hotfix for gemini
+
+Start the gnss receiver as part of the service startup because it is not
+started automatically.
+
+Signed-off-by: Alexandre Bard <alexandre.bard@netmodule.com>
+---
+ systemd/gnss-mgr.service | 5 +++--
+ 1 file changed, 3 insertions(+), 2 deletions(-)
+
+diff --git a/systemd/gnss-mgr.service b/systemd/gnss-mgr.service
+index 4694bee..2aa0a9b 100644
+--- a/systemd/gnss-mgr.service
+++ b/systemd/gnss-mgr.service
+@@ -1,13 +1,14 @@
+ [Unit]
+ Description=GNSS Manager
+-Requires=dev-gnss0.device
+-After=dev-gnss0.device
+ 
+ [Service]
+ Type=oneshot
+ RemainAfterExit=yes
+ExecStartPre=/bin/sh -c 'gpioset $(gpiofind "GNSS_RST~")=1'
+ExecStartPre=sleep 5
+ ExecStart=/usr/sbin/gnss-mgr-service start
+ ExecStop=/usr/sbin/gnss-mgr-service stop
+ExecStopPost=/bin/sh -c 'gpioset $(gpiofind "GNSS_RST~")=0'
+ ExecReload=/usr/sbin/gnss-mgr-service reload
+ StandardOutput=null
+ 
--- a/layers/meta-nwl-distro/recipes-navigation/gpsd/gpsd_%.bbappend
+++ b/layers/meta-nwl-distro/recipes-navigation/gpsd/gpsd_%.bbappend
@ -0,0 +1,15 @@
+
+TTY_DEVICE = "/dev/gnss0"
+USBAUTO_STATE = "false"
+
+do_install:append () {
+    sed -i 's|DEVICES=""|DEVICES="${TTY_DEVICE}"|g' ${D}/etc/default/gpsd.default
+    sed -i 's|USBAUTO="true"|USBAUTO="${USBAUTO_STATE}"|g' ${D}/etc/default/gpsd.default
+
+    sed -i "s/GPSD_OPTIONS=\"\(.*\)\"/GPSD_OPTIONS=\"\1 -s 115200\"/g" \
+            ${D}${sysconfdir}/default/gpsd.default
+}
+
+
+# Service is started by gnss-mgr
+SYSTEMD_AUTO_ENABLE = "disable"
--- a/layers/meta-nwl-distro/recipes-navigation/nmubxlib/nmubxlib.bb
+++ b/layers/meta-nwl-distro/recipes-navigation/nmubxlib/nmubxlib.bb
@ -0,0 +1,24 @@
+DESCRIPTION = "Library implementing UBX protocol for u-blox gnss modems"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=331a9220a74b05f133bf1ef09b6903b2"
+
+RDEPENDS:${PN} += " \
+    python3-setuptools \
+    "
+
+DEPENDS = "python3-setuptools-scm-native"
+
+inherit setuptools3
+inherit gitpkgv
+
+# Package Version (built from tags)
+PKGV = "${GITPKGVTAG}"
+# Recipe Version
+PV = "1.0-git${SRCPV}"
+PR = "r1"
+
+SRC_URI = "git://gitlab.com/netmodule/tools/nmubxlib.git;protocol=ssh;user=git;branch=master"
+SRCREV = "7c22b57cdd169a6651cb0c17a215d1e448727bcb"
+S = "${WORKDIR}/git"
+
+
--- a/layers/meta-nwl-distro/recipes-testing/nwl-tests/nwl-tests_git.bb
+++ b/layers/meta-nwl-distro/recipes-testing/nwl-tests/nwl-tests_git.bb
@ -7,7 +7,7 @@ SRC_URI = "git://git@bitbucket.gad.local:7999/nm-nsp/nwl-test.git;protocol=ssh;b

 PV = "1.0+git${SRCPV}"

-SRCREV = "b20cf128663270b095f51d538b650d0536822069"
+SRCREV = "9989fb3c439db711ecaef4a8e8eb60f88533eccc"

 S = "${WORKDIR}/git"

--- a/layers/meta-nwl-marvell-bsp/conf/layer.conf
+++ b/layers/meta-nwl-marvell-bsp/conf/layer.conf
@ -0,0 +1,18 @@
+# We have a conf and classes directory, add to BBPATH
+BBPATH .= ":${LAYERDIR}"
+
+# We have recipes-* directories, add to BBFILES
+BBFILES += "${LAYERDIR}/recipes-*/*/*.bb \
+            ${LAYERDIR}/recipes-*/*/*.bbappend"
+
+BBFILE_COLLECTIONS += "nwl-marvell-bsp"
+BBFILE_PATTERN_nwl-marvell-bsp = "^${LAYERDIR}/"
+BBFILE_PRIORITY_nwl-marvell-bsp = "7"
+
+# This should only be incremented on significant changes that will
+# cause compatibility issues with other layers
+LAYERVERSION_nwl-marvell-bsp = "1"
+
+LAYERDEPENDS_nwl-marvell-bsp = "core meta-belden-coreos"
+
+LAYERSERIES_COMPAT_nwl-marvell-bsp = "kirkstone"
--- a/layers/meta-nwl-marvell-bsp/conf/machine/cn9131-nitroc.conf
+++ b/layers/meta-nwl-marvell-bsp/conf/machine/cn9131-nitroc.conf
@ -0,0 +1,70 @@
+#@TYPE: Machine
+#@NAME: cn9131-nitroc
+#@DESCRIPTION: Belden NetModule CN9131 NITROC
+#
+# cn913x is from Marvell octeon tx2 family, but it's based on a cortex-A72
+# so we can't use the armv8-2a/tune-octeontx2.inc (armv8a vs arm8-2a)
+# instead we can use the older octeontx family previously known as thunderx
+require conf/machine/include/arm/armv8a/tune-thunderx.inc
+
+# SOC_FAMILY is added to MACHINE_OVERRIDES in the soc-family.inc file
+SOC_FAMILY = "cn913x"
+require conf/machine/include/soc-family.inc
+
+# Bootloader configuration
+# *****************************************************************************
+
+PREFERRED_PROVIDER_virtual/bootloader = "u-boot"
+PREFERRED_VERSION_u-boot ?= "2020.10-marvell"
+
+# Set the configuration and device tree for Nitroc
+UBOOT_MACHINE = "nitroc_defconfig"
+UBOOT_BUILDENV_DEVICE_TREE ??= "cn9131-nitroc-v1"
+
+# Kernel configuration
+# ******************************************************************************
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-nitroc"
+PREFERRED_VERSION_linux-netmodule ?= "v6.6.y%"
+PREFERRED_VERSION_trusted-firmware-a ?= "2.9"
+
+KERNEL_IMAGETYPE = "Image"
+KERNEL_DEFCONFIG ?= "nitroc_defconfig"
+KERNEL_DEVICETREE ?= "\
+    marvell/cn9131-nitroc-v1.dtb \
+    marvell/cn9131-nitroc-m12.dtb \
+    marvell/cn9131-nitroc-rj45.dtb \
+"
+
+#  getty configuration
+# ******************************************************************************
+
+SERIAL_CONSOLES = "115200;ttyS0"
+SERIAL_CONSOLES_CHECK ?= "${SERIAL_CONSOLES}"
+APPEND += "console=ttyS0,115200"
+
+# Image generation
+# ******************************************************************************
+
+# Ensure that both flash-image.bin and boot.scr are generated as they are needed
+# for a wic image
+do_image_wic[depends] += "trusted-firmware-a:do_deploy"
+WKS_FILE = "cn913x-sdcard.wks.in"
+COREOS_INSTALLER_WKS_FILE ?= "cn913x-sdcard-installer.wks"
+IMAGE_FSTYPES += "wic.xz wic.bmap"
+
+COREOS_IMAGE_SWUPDATE_EXTRACLASSES += " coreos-image-swupdate-cn913x"
+
+# No watchdog available yet
+EFIBOOTGUARD_TIMEOUT ?= "0"
+require conf/machine/include/coreos-generic-features/efi.inc
+require conf/machine/include/coreos-generic-features/partitions.inc
+
+### Device specific settings
+# Kernel modules are not essential for booting but are needed for most things
+MACHINE_EXTRA_RDEPENDS += "kernel-modules"
+# Device trees are included in the unified kernel and not needed in the rootfs
+# MACHINE_EXTRA_RDEPENDS += "kernel-devicetree"
+# Needed for phy firmware
+MACHINE_EXTRA_RDEPENDS += "linux-firmware-ath11k"
+MACHINE_EXTRA_RDEPENDS += "linux-firmware-ath10k"
--- a/layers/meta-nwl-marvell-bsp/recipes-bsp/binaries-marvell/binaries-marvell_git.bb
+++ b/layers/meta-nwl-marvell-bsp/recipes-bsp/binaries-marvell/binaries-marvell_git.bb
@ -0,0 +1,29 @@
+DESCRIPTION = "Marvell binaries like the system controller firmware"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://README.md;md5=bbdf038ac62317d3a12a067c50dadc61"
+
+SRC_URI = "git://git@bitbucket.gad.local:7999/nm-nsp/binaries-marvell.git;protocol=ssh;user=git;branch=nitroc"
+
+# Modify these as desired
+PV = "11.23.08+git${SRCPV}"
+SRCREV = "6765e4fa3eae4000a307bdb891fe8c03f3422f91"
+
+S = "${WORKDIR}/git"
+
+do_configure () {
+	:
+}
+
+do_compile () {
+   :
+}
+
+do_install () {
+    # The sources are needed by arm-trusted-firmware
+    install -d "${D}/usr/src/${PN}"
+    cp -r "${S}/mrvl_scp_bl2.img" "${D}/usr/src/${PN}/"
+}
+
+FILES:${PN}-dev = "/usr/src/${PN}"
+INSANE_SKIP:${PN}-dev += "file-rdeps"
+SYSROOT_DIRS +=  " /usr/src/${PN} "
--- a/layers/meta-nwl-marvell-bsp/recipes-bsp/mv-ddr-marvell/mv-ddr-marvell_git.bb
+++ b/layers/meta-nwl-marvell-bsp/recipes-bsp/mv-ddr-marvell/mv-ddr-marvell_git.bb
@ -0,0 +1,29 @@
+DESCRIPTION = "Marvell DDR training library"
+LICENSE = "GPL-2.0-or-later"
+LIC_FILES_CHKSUM = "file://Makefile;md5=9993156c815673120e02a7c8e00a8cc3"
+
+SRC_URI = "git://github.com/MarvellEmbeddedProcessors/mv-ddr-marvell.git;protocol=https;branch=master"
+
+# Modify these as desired
+PV = "devel+git${SRCPV}"
+SRCREV = "bfcf62051be835f725005bb5137928f7c27b792e"
+
+S = "${WORKDIR}/git"
+
+do_configure () {
+	:
+}
+
+do_compile () {
+   :
+}
+
+do_install () {
+    # The sources are needed by arm-trusted-firmware
+    install -d "${D}/usr/src/${PN}"
+    cp -r "${S}/." "${D}/usr/src/${PN}/"
+}
+
+FILES:${PN}-dev = "/usr/src/${PN}"
+INSANE_SKIP:${PN}-dev += "file-rdeps"
+SYSROOT_DIRS +=  " /usr/src/${PN} "
--- a/layers/meta-nwl-marvell-bsp/recipes-bsp/trusted-firmware-a/trusted-firmware-a_2.9.bb
+++ b/layers/meta-nwl-marvell-bsp/recipes-bsp/trusted-firmware-a/trusted-firmware-a_2.9.bb
@ -0,0 +1,21 @@
+require recipes-bsp/trusted-firmware-a/trusted-firmware-a.inc
+
+DEPENDS += "mv-ddr-marvell binaries-marvell coreutils-native"
+
+COMPATIBLE_MACHINE = "cn913x"
+
+LIC_FILES_CHKSUM += "file://docs/license.rst;md5=b2c740efedc159745b9b31f88ff03dde"
+
+SRC_URI = "git://git@bitbucket.gad.local:7999/nm-nsp/trusted-firmware-a.git;protocol=ssh;user=git;branch=nitroc-v2.9.0"
+SRCREV = "41911b0db0a07878a384e8358950b79e6df7d1be"
+
+EXTRA_OEMAKE += "MV_DDR_PATH=${PKG_CONFIG_SYSROOT_DIR}/usr/src/mv-ddr-marvell DDR_TOPOLOGY=2 SCP_BL2=${PKG_CONFIG_SYSROOT_DIR}/usr/src/binaries-marvell/mrvl_scp_bl2.img"
+
+TFA_PLATFORM       = "t9130_nitroc"
+TFA_BUILD_TARGET   = "all mrvl_flash"
+TFA_INSTALL_TARGET = "flash-image"
+TFA_DEBUG          = "1"
+TFA_MBEDTLS        = "0"
+TFA_UBOOT          = "1"
+TFA_UEFI           = "0"
+
--- a/layers/meta-nwl-marvell-bsp/recipes-bsp/u-boot/u-boot_2020.10-marvell.bb
+++ b/layers/meta-nwl-marvell-bsp/recipes-bsp/u-boot/u-boot_2020.10-marvell.bb
@ -0,0 +1,32 @@
+HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
+DESCRIPTION = "U-Boot, a boot loader for Embedded boards based on PowerPC, \
+ARM, MIPS and several other processors, which can be installed in a boot \
+ROM and used to initialize and test the hardware or to download and run \
+application code."
+SECTION = "bootloaders"
+DEPENDS += "flex-native bison-native"
+
+COMPATIBLE_MACHINE = "cn913x"
+
+LICENSE = "GPL-2.0-or-later"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=5a7450c57ffe5ae63fd732446b988025"
+PE = "1"
+
+SRCREV = "3534f6601c53362407bc6b3bf0af85908c38b81c"
+SRC_URI = "git://git@bitbucket.gad.local:7999/nm-nsp/netmodule-u-boot.git;protocol=ssh;user=git;branch=sdk11.23.08-v2020.10-nitroc"
+
+S = "${WORKDIR}/git"
+
+require recipes-bsp/u-boot/u-boot.inc
+require recipes-bsp/u-boot/u-boot-coreos.inc
+
+# Solidrun patches require to build out-of-the-tree
+B = "${WORKDIR}/build"
+
+DEPENDS += "bc-native dtc-native u-boot-mkimage-native"
+
+do_compile:prepend() {
+    export DEVICE_TREE="${UBOOT_BUILDENV_DEVICE_TREE}"
+}
+
+SYSROOT_DIRS +=  " /boot "
--- a/layers/meta-nwl-marvell-bsp/recipes-kernel/linux/linux-nitroc_git.bb
+++ b/layers/meta-nwl-marvell-bsp/recipes-kernel/linux/linux-nitroc_git.bb
@ -0,0 +1,71 @@
+DESCRIPTION = "Linux kernel for the Nitroc hardware"
+COMPATIBLE_MACHINE = "cn9131-nitroc"
+
+inherit kernel
+
+SRC_URI = "git://git@bitbucket.gad.local:7999/nm-nsp/netmodule-linux.git;protocol=ssh;user=git;branch=nitroc-v6.6.y"
+SRCREV ?= "0b8f8f81ab0ec015002357820f50bfc2924390fe"
+PV = "v6.6.y+git${SRCPV}"
+
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
+
+S = "${WORKDIR}/git"
+
+#If a KERNEL_DEFCONFIG is specified, the defconfig specified in SRC_URI will be overwritten!
+do_configure:append(){
+    if [ "${KERNEL_DEFCONFIG}" != "" ]; then
+        oe_runmake ${KERNEL_DEFCONFIG}
+    fi
+    configs="${@" ".join(find_cfgs(d))}"
+    if [ ! -z "${configs}" ]; then
+        ${S}/scripts/kconfig/merge_config.sh -m -O ${WORKDIR}/build ${WORKDIR}/build/.config ${WORKDIR}/*.cfg
+    fi
+}
+
+# The default kenrel.bbclass expects it can remove the source symlink,
+# newer kernels don't have this symlink so we need to override kernel_do_install
+kernel_do_install() {
+	#
+	# First install the modules
+	#
+	unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
+	if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
+		oe_runmake DEPMOD=echo MODLIB=${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION} INSTALL_FW_PATH=${D}${nonarch_base_libdir}/firmware modules_install
+		rm "${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION}/build"
+		# Remove empty module directories to prevent QA issues
+		find "${D}${nonarch_base_libdir}/modules/${KERNEL_VERSION}/kernel" -type d -empty -delete
+	else
+		bbnote "no modules to install"
+	fi
+
+	#
+	# Install various kernel output (zImage, map file, config, module support files)
+	#
+	install -d ${D}/${KERNEL_IMAGEDEST}
+
+	#
+	# When including an initramfs bundle inside a FIT image, the fitImage is created after the install task
+	# by do_assemble_fitimage_initramfs.
+	# This happens after the generation of the initramfs bundle (done by do_bundle_initramfs).
+	# So, at the level of the install task we should not try to install the fitImage. fitImage is still not
+	# generated yet.
+	# After the generation of the fitImage, the deploy task copies the fitImage from the build directory to
+	# the deploy folder.
+	#
+
+	for imageType in ${KERNEL_IMAGETYPES} ; do
+		if [ $imageType != "fitImage" ] || [ "${INITRAMFS_IMAGE_BUNDLE}" != "1" ] ; then
+			install -m 0644 ${KERNEL_OUTPUT_DIR}/$imageType ${D}/${KERNEL_IMAGEDEST}/$imageType-${KERNEL_VERSION}
+		fi
+	done
+
+	install -m 0644 System.map ${D}/${KERNEL_IMAGEDEST}/System.map-${KERNEL_VERSION}
+	install -m 0644 .config ${D}/${KERNEL_IMAGEDEST}/config-${KERNEL_VERSION}
+	install -m 0644 vmlinux ${D}/${KERNEL_IMAGEDEST}/vmlinux-${KERNEL_VERSION}
+	[ -e Module.symvers ] && install -m 0644 Module.symvers ${D}/${KERNEL_IMAGEDEST}/Module.symvers-${KERNEL_VERSION}
+	install -d ${D}${sysconfdir}/modules-load.d
+	install -d ${D}${sysconfdir}/modprobe.d
+}
+
+require recipes-kernel/linux/linux-yocto-coreos-efi.inc
--- a/templates/bblayers.conf.sample
+++ b/templates/bblayers.conf.sample
@ -10,6 +10,7 @@ BBLAYERS ?= " \
  ##COREOS_LAYERSDIR##/meta-belden-coreos \
  ##COREOS_LAYERSDIR##/meta-belden-coreos-bsp \
  ##COREOS_LAYERSDIR##/meta-belden-marvell-bsp \
+  ##COREOS_LAYERSDIR##/meta-netmodule-coreos-bsp \
  ##COREOS_EXTLAYERSDIR##/meta-openembedded/meta-oe \
  ##COREOS_EXTLAYERSDIR##/meta-openembedded/meta-networking \
  ##COREOS_EXTLAYERSDIR##/meta-openembedded/meta-filesystems \
@ -18,8 +19,12 @@ BBLAYERS ?= " \
  ##COREOS_EXTLAYERSDIR##/meta-virtualization \
  ##COREOS_EXTLAYERSDIR##/meta-efibootguard \
  ##COREOS_EXTLAYERSDIR##/meta-swupdate \
+  ##COREOS_EXTLAYERSDIR##/meta-arm/meta-arm \
+  ##COREOS_EXTLAYERSDIR##/meta-arm/meta-arm-toolchain \
+  ##COREOS_EXTLAYERSDIR##/meta-ti/meta-ti-bsp \
  ##NWL_LAYERSDIR##/meta-nwl-distro \
  ##NWL_LAYERSDIR##/meta-netmodule-legacy-bsp \
+  ##NWL_LAYERSDIR##/meta-nwl-marvell-bsp \
  ##NWL_EXTLAYERSDIR##/meta-netmodule-wlan \
  "

--- a/templates/conf-notes.txt
+++ b/templates/conf-notes.txt
@ -27,8 +27,8 @@
 You can now run 'bitbake <target>'

 Common targets are:
-    nwl-image-minimal
-    nwl-image-testable
+    nwl-ramdisk-minimal
+    nwl-test-image

 You can also run generated qemu images with a command like 'runqemu qemuarm64'.

--- a/templates/local.conf.sample
+++ b/templates/local.conf.sample
@ -26,6 +26,7 @@
 #MACHINE ?= "qemux86"
 #MACHINE ?= "qemux86-64"
 #MACHINE ?= "cn9130-cf-pro"
+#MACHINE ?= "cn9131-nitroc"
 #
 # This sets the default machine to be qemuarm64 if no other machine is selected:
 MACHINE ??= "cn9130-cf-pro"
Author	SHA1	Message	Date
Alexandre Bard	881a818a37	Adapt gpsd recipe to make it compatible with gnss-mgr gpsd needs some small changes to not conflict with gnss-mgr id:502637	2024-03-15 14:00:01 +01:00
Alexandre Bard	c5dd7ce5e8	nwl-distro: Add gnss-mgr to test tools This tool is used to enable and configure the gnss receiver. id:502637	2024-03-15 14:00:01 +01:00
Alexandre Bard	2837a9f876	nwl-distro: Add ModemManager and wwan-config to test tools These tools are required to properly enable, configure and use the wwan modems. id:502637	2024-03-15 14:00:01 +01:00
Alexandre Bard	a77ced658e	nwl-distro: Add udev-rules to test tools These udev rules are used to "standardized" the names of the different interfaces (mainly GNSS and WWAN). id:502637	2024-03-15 14:00:01 +01:00
Alexandre Bard	580b4be2ca	nwl-test-image: Add some test tools - hostapd to create access points - gps-utils to test the gnss receiver - can-utils to test the can interfaces - libgpiod-tools to toggle the gpios - chrony to get the time set properly on the target and help reading the logs - minicom to debug the serial ports id:502637	2024-03-15 14:00:01 +01:00
Alexandre Bard	ead191b097	distro/nwl.conf: Fix typo	2024-03-15 14:00:01 +01:00
Alexandre Bard	d2e0b9c9df	packagegroup-nwl-core: Add dnsmasq for AP mode dnsmasq is used by networkmanager as DHCP server in AP mode. But the default service must be disabled otherwise it conflicts with the instance started by NetworkManager. id:502637	2024-03-15 14:00:01 +01:00
Alexandre Bard	a11f7a39b9	meta-nwl-distro: Remove custom signing keys Common development keys are now integrated directly in core-os.	2024-03-01 17:37:50 +01:00
Alexandre Bard	3516f4f7bd	nwl-image.bbclass: Remove custom core-os configs These configs are now properly handled in core-os based on machine definitions. id:502637	2024-03-01 17:37:50 +01:00
Alexandre Bard	a40e734c0d	meta-netmodule-legacy-bsp: machine.conf: Use relative import paths Since the included files are in the same directory, it makes more sense to include them relatively. More specifically, it is a problem for ti33x.inc that exists in meta-ti which is now used for hw34. id:502637	2024-03-01 17:37:50 +01:00
Alexandre Bard	8d098aaa6c	templates/bblayers.conf.sample: Add new layers from CoreOS id:502637	2024-03-01 16:22:30 +01:00
Alexandre Bard	f7c25896cf	Update Core-OS to latest version id:397918	2024-03-01 16:22:03 +01:00
Alexandre Bard	2bee4cb540	templates/conf-notes: Fix targets name We forgot to change this when we renamed the images	2024-02-16 18:41:54 +01:00
Lucien Mueller	e20ff1ff22	templates/bblayers.conf.sample: add the new meta-nwl-marvell-bsp layer templates/local.conf.sample: add cn9131-nitroc machine as example Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>	2024-01-30 15:54:09 +01:00
Stefan Eichenberger	c790b986ca	layers: meta-nwl-marvell-bsp: add initial layer and add Nitroc support Add an initial Marvell BSP layer which supports Nitroc. It is different from CoreOS for now because it uses a newer kernel, U-Boot and trusted firmware. Signed-off-by: Stefan Eichenberger <stefan.eichenberger@netmodule.com>	2024-01-25 17:06:55 +01:00
Marc Mattmüller	3e672279f7	srcrev: updated source revisions by Jenkins Job	2023-11-07 05:51:11 +01:00
Alexandre Bard	16bd38ae2b	nwl-test-image: Add components required by uboot to boot the image nrsw-uboot is reading the devicetree and the fpga image from the rootfs. id:458169	2023-10-31 11:10:56 +01:00
Alexandre Bard	20b9904c2b	legacy-bsp: Add wic files for armada devices id:458169	2023-10-31 11:10:56 +01:00
Alexandre Bard	64bc9777e8	legacy-bsp: Add support for u-boot for armada id:458169	2023-10-31 11:10:56 +01:00
Alexandre Bard	c1165a318f	nwl-test-image: Add missing components Since we worked mainly on the ramdisk image, the test-image was almost empty and lacking the minimum components. This components are now defined in a packagegroup which is included in all nwl-images. It also include a new MACHINE_FEATURE : nrsw-ready. This feature allows us to not include NRSW modules for devices that are not supported by NRSW: for the moment it is mainly the devices supported by core-os like cn9130-cf-pro. These devices are build against there custom kernel against which the NRSW modules are not buildable. id:458169	2023-10-30 14:19:58 +01:00
Alexandre Bard	49cf460db4	kernel: Add support for gpt partitions We are using a GPT partition table in the WIC file, so GPT support is required. id:458169	2023-10-27 14:35:20 +02:00
Alexandre Bard	02dc2cdbef	ramdisk-image: Add tools to install the wic files on the mmc id:458169	2023-10-27 14:35:20 +02:00
Alexandre Bard	19f4f4f7a3	nwl-test-image: Create a wic file for sitara devices id:458169	2023-10-27 14:35:20 +02:00
Alexandre Bard	f7a130b901	bsp: Add u-boot for sitara devices id:458169	2023-10-27 14:35:20 +02:00
Lucien Mueller	6ad5d7fd94	add fpga image support in fitImage. INFO: The image address entries in the fitImage changed e.g. "fpga@1" -> "fpga-1" see: commit 6047be9f8f0f5d616fda11d83b682c1b8aeaa0ae in meta-openembedded Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>	2023-10-26 15:15:52 +02:00
Alexandre Bard	ff08561cb5	Update source revisions Auto-update by jenkins in nightly branch Squashed commit of the following: commit 936c4f49f17f4fe0a10d601bf7dd3937b72b7a89 Author: Marc Mattmüller <marc.mattmueller@netmodule.com> Date: Thu Oct 5 05:51:12 2023 +0200 srcrev: updated source revisions by Jenkins Job	2023-10-05 08:24:31 +02:00
Marcel Reichmuth	af9096dd9a	hw18: implement card detect for sd card id:447882	2023-10-03 12:43:23 +02:00
Lucien Mueller	53507a012e	sitara defconfig: add CONFIG_ETHTOOL_NETLINK to fix broadr issues ID: 446426 Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>	2023-10-03 09:17:40 +02:00
Marcel Reichmuth	d63894745b	dsa: fix cpu port configuration id:447902	2023-09-29 14:18:32 +02:00
Lucien Mueller	2537fd2076	nwl-ramdisk-minimal: add kernel-modules Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>	2023-09-29 11:14:14 +02:00
Alexandre Bard	3c81ac50ca	kernel-module-pcie: Use devicetree to configure gpios id:452476	2023-09-28 18:30:17 +02:00
Lucien Mueller	d9c27fbd9a	nwl-ramdisk-minimal: add ssh support Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>	2023-09-28 09:47:31 +02:00