nmhw24: align environment for nrsw support
This commit is contained in:
Rene Straub
parent
44ad609219
commit
05a415b524
|
|
@ -19,6 +19,11 @@
|
|||
|
||||
#include <configs/ti_am335x_common.h>
|
||||
|
||||
/* TODO: Inject via build system */
|
||||
#define CONFIG_NRSW
|
||||
|
||||
|
||||
|
||||
/* Disable U-Boot load from filesystems, to save around 10 kB SPL image size */
|
||||
#ifdef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
|
||||
# undef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
|
||||
|
|
@ -75,136 +80,111 @@ int eth_phy_timeout(void);
|
|||
* Memory map for booting Linux
|
||||
*
|
||||
* 0x80000000 63MB KERNEL_ADDR (kernel_addr), kernel execution address
|
||||
* 0x83F00000 1MB FDT_ADDR (fdt_addr_r), device tree loading address if not included in kernel
|
||||
* 0x84000000 126MB RD_ADDR (ramdisk_addr_r), ramdisc loading address
|
||||
* 0x8BE00000 2MB PXE_ADDR (pxefile_addr_r), pxe configuration file (pxe get command)
|
||||
* 0x83F00000 1MB FDT_ADDR_R (fdt_addr_r), device tree loading address if not included in kernel
|
||||
* 126MB INIT_RD_HIGH (initrd_high), ramdisc top address for relocation
|
||||
* 0x8BE00000 2MB PXE_ADDR (pxefile_addr_r), pxe configuration file (pxe get command)
|
||||
* 0x8C000000 1MB LOAD_ADDR (load_addr), loading address for generic files
|
||||
* 0x8C100000 31MB KERNEL_ADDR_R (kernel_addr_r), kernel loading address (will be relocated to kernel_addr)
|
||||
* 0x8E000000 4B NRSW reset reason
|
||||
* 0x90000000 256MB <>, Free space 512MB systems
|
||||
* 0xA0000000 512MB <>, Free space, 1GB systems only
|
||||
* 0xC0000000 End of RAM
|
||||
*
|
||||
* ((0x84000000 126MB RD_ADDR (ramdisk_addr_r), ramdisc loading address))
|
||||
*/
|
||||
|
||||
#define KERNEL_ADDR "0x80000000"
|
||||
#define FDT_ADDR "0x83F00000"
|
||||
#define RD_ADDR "0x84000000"
|
||||
/*#define FDT_ADDR "0x82000000" /* /* NRSW, trying to use FDT_ADDR_R = 0x83F00000 instead */
|
||||
#define FDT_ADDR_R "0x83F00000"
|
||||
#define PXE_ADDR "0x8BE00000"
|
||||
#define LOAD_ADDR "0x8C000000"
|
||||
#define KERNEL_ADDR_R "0x8C100000"
|
||||
|
||||
#if 0 /* HW20 differences */
|
||||
#define LOAD_ADDR "0x83000000" 8c0000
|
||||
#define FDT_ADDR "0x82000000" 83f000
|
||||
#define PXE_ADDR "0x82800000" 8be000
|
||||
#define FDT_HIGH_ADDR "0x87000000"
|
||||
#define INIT_RD_ADDR "0x88000000"
|
||||
#endif
|
||||
|
||||
|
||||
/* TODO: Check this with 1 GByte system */
|
||||
/* Most likely ramdisk and FDT will be loaded to too high adresses and boot will fail */
|
||||
#if 0
|
||||
/*
|
||||
* Avoid copying ramdisc and dtb above 512MB, as it breaks Linux boot.
|
||||
* -1 means "do not copy" to high address, use in place.
|
||||
*/
|
||||
#define INITRD_HIGH_ADDR "0x84000000"
|
||||
#define FDT_HIGH_ADDR "0xffffffff"
|
||||
#define INITRD_HIGH_ADDR "0x8BE0000"
|
||||
#define RD_ADDR "0x84000000"
|
||||
#define FDT_HIGH_ADDR "0x87000000"
|
||||
#define FDT_HIGH_ADDR "0xffffffff"
|
||||
|
||||
"fdt_high=" FDT_HIGH_ADDR "\0" /* Breaks NRSW, required by Yocto ! */ \
|
||||
"fdt_addr=" FDT_ADDR "\0" /* NRSW only, breaks yocto, can we move that to fdt_addr_r ? */ \
|
||||
"initrd_high=" INITRD_HIGH_ADDR "\0" /* (0x84000000) -> INIT_RD_ADDR (0x88000000) */ \
|
||||
"ramdisk_addr_r=" RD_ADDR "\0" \
|
||||
|
||||
#endif
|
||||
|
||||
/* TODO: Check big differences to NMHW20 */
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"fdt_image=am335x-nmhw24-prod1.dtb\0" \
|
||||
"fdt_addr_r=" FDT_ADDR "\0" \
|
||||
"fdt_high=" FDT_HIGH_ADDR "\0" \
|
||||
"initrd_high=" INITRD_HIGH_ADDR "\0" \
|
||||
"kernel_addr=" KERNEL_ADDR "\0" \
|
||||
/* Memory Adresses */ \
|
||||
"fdt_addr_r=" FDT_ADDR_R "\0" \
|
||||
"kernel_addr=" KERNEL_ADDR "\0" /* NRSW only */ \
|
||||
"kernel_addr_r=" KERNEL_ADDR_R "\0" \
|
||||
"load_addr=" LOAD_ADDR "\0" \
|
||||
"pxefile_addr_r=" PXE_ADDR "\0" \
|
||||
"ramdisk_addr_r=" RD_ADDR "\0" \
|
||||
\
|
||||
/* Misc */ \
|
||||
"defaultconsole=ttyS1\0" \
|
||||
"fdt_skip_update=yes\0" \
|
||||
"bootdelay=0\0" \
|
||||
\
|
||||
/* Networking */ \
|
||||
"ethprime=cpsw\0" \
|
||||
"ethopts=ti_cpsw.rx_packet_max=1526\0" \
|
||||
"ipaddr=192.168.1.1\0" \
|
||||
"serverip=192.168.1.254\0" \
|
||||
"tftptimeout=2000\0" \
|
||||
"tftptimeoutcountmax=5\0" \
|
||||
"bootpretryperiod=10000\0" /* 2000 */ \
|
||||
"autoload=false\0" \
|
||||
\
|
||||
/* OSTree boot */ \
|
||||
"bootcmd_otenv=ext4load mmc 1:1 $load_addr /boot/loader/uEnv.txt; " \
|
||||
"env import -t $load_addr $filesize; " \
|
||||
"setenv bootargs $bootargs root=/dev/ram0 console=$defaultconsole,115200 " \
|
||||
"$ethopts rw ostree_root=/dev/mmcblk1p1\0" \
|
||||
"bootcmd_rd_in_mmc=ext4load mmc 1:1 $kernel_addr_r /boot$kernel_image; " \
|
||||
"bootm $kernel_addr_r\0" \
|
||||
"bootcmd=run bootcmd_otenv; run bootcmd_rd_in_mmc\0" \
|
||||
"bootdelay=0\0" \
|
||||
"ipaddr=192.168.1.1\0" \
|
||||
"serverip=192.168.1.254\0" \
|
||||
"tftptimeout=2000\0" \
|
||||
"tftptimeoutcountmax=5\0" \
|
||||
"bootpretryperiod=10000\0" \
|
||||
"autoload=false\0" \
|
||||
"tftp_recovery=tftpboot $kernel_addr recovery-image; tftpboot $fdt_addr_r recovery-dtb; " \
|
||||
"setenv bootargs rdinit=/etc/preinit console=$defaultconsole,115200 " \
|
||||
"debug ethopts; " \
|
||||
"bootz $kernel_addr - $fdt_addr_r\0" \
|
||||
"pxe_recovery=mdio up $ethprime && dhcp && pxe get && pxe boot\0" \
|
||||
"recovery=run pxe_recovery || setenv ipaddr $ipaddr; setenv serverip $serverip; run tftp_recovery\0" \
|
||||
/* setenv ipaddr and serverip is necessary, because dhclient can destroy the IPs internally */
|
||||
|
||||
|
||||
#if 0
|
||||
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||
"kernel_image=kernel.bin\0" \
|
||||
"fdt_image=openwrt-nrhw20-nb1601.dtb\0"\
|
||||
"modeboot=sdboot\0" \
|
||||
"fdt_addr=" FDT_ADDR "\0" \
|
||||
"kernel_addr=" KERNEL_ADDR "\0" \
|
||||
"load_addr=" LOAD_ADDR "\0" \
|
||||
"root_part=1\0" /* Default root partition, overwritten in board file */ \
|
||||
"defaultconsole=ttyS1\0" /* Default output console */ \
|
||||
"add_sd_bootargs=setenv bootargs $bootargs root=/dev/mmcblk1p$root_part rootfstype=ext4 " \
|
||||
"bootcmd=run shieldcmd; run bootcmd_otenv; run bootcmd_rd_in_mmc\0" \
|
||||
\
|
||||
/* NRSW boot */ \
|
||||
"root_part=1\0" /* from NRSW, required here? set from board.c */ \
|
||||
"kernel_image=kernel.bin\0" \
|
||||
"fdt_image=am335x-nmhw24-prod1.dtb\0" /* diff, openwrt-nrhw24-nb801.dtb, not relevant as it will be overwritten */ \
|
||||
"add_sd_bootargs=setenv bootargs $bootargs root=/dev/${mmc_dev}p$root_part rootfstype=ext4 " \
|
||||
"console=$defaultconsole,115200 rootwait loglevel=4 ti_cpsw.rx_packet_max=1526\0" \
|
||||
"add_version_bootargs=setenv bootargs $bootargs\0" \
|
||||
"fdt_skip_update=yes\0" \
|
||||
"ethprime=cpsw\0" \
|
||||
"sdbringup=echo Try bringup boot && ext4load mmc 1:$root_part $kernel_addr /boot/zImage && " \
|
||||
"ext4load mmc 1:$root_part $fdt_addr /boot/$fdt_image && setenv bootargs $bootargs rw;\0" \
|
||||
"sdprod=ext4load mmc 1:$root_part $kernel_addr /boot/$kernel_image && " \
|
||||
"ext4load mmc 1:$root_part $fdt_addr /boot/$fdt_image && setenv bootargs $bootargs ro;\0" \
|
||||
"sdboot=if mmc dev 1; then echo Copying Linux from SD to RAM...; "\
|
||||
"sdboot=env set fdt_addr " FDT_ADDR_R "; "\
|
||||
"if mmc dev 1; then echo Copying Linux from SD to RAM...; "\
|
||||
"if test -e mmc 1:$root_part /boot/$kernel_image; then run sdprod; " \
|
||||
"else run sdbringup; fi; " \
|
||||
/* For v4.19 kernel $mmc_dev should be "mmcblk1" (read from DT), for v3.18 kernel: "mmcblk0" */ \
|
||||
"fdt addr $fdt_addr;if fdt get value mmc_dev /nm_env nm,mmc-dev;then;else setenv mmc_dev mmcblk0;fi;" \
|
||||
"run add_sd_bootargs; run add_version_bootargs; run shieldcmd; " \
|
||||
"bootz $kernel_addr - $fdt_addr; fi\0" \
|
||||
"bootcmd_otenv=ext4load mmc 1:1 $load_addr /boot/loader/uEnv.txt; " \
|
||||
"env import -t $load_addr $filesize; " \
|
||||
"setenv bootargs $bootargs root=/dev/ram0 console=$defaultconsole,115200 " \
|
||||
"$ethopts rw ostree_root=/dev/mmcblk1p1\0" \
|
||||
"bootcmd_rd_in_mmc=ext4load mmc 1:1 $kernel_addr_r /boot$kernel_image; " \
|
||||
"bootm $kernel_addr_r\0" \
|
||||
"bootcmd=run bootcmd_otenv; run bootcmd_rd_in_mmc\0" \
|
||||
"ipaddr=192.168.1.1\0" \
|
||||
"serverip=192.168.1.254\0" \
|
||||
"pxefile_addr_r=" PXE_ADDR "\0" \
|
||||
"fdt_addr_r=" FDT_ADDR "\0" \
|
||||
"fdt_high=" FDT_HIGH_ADDR "\0" \
|
||||
"kernel_addr_r=" KERNEL_ADDR "\0" \
|
||||
"ramdisk_addr_r=" LOAD_ADDR "\0" \
|
||||
"initrd_high=" INIT_RD_ADDR "\0" \
|
||||
"bootpretryperiod=1000\0" \
|
||||
"tftptimeout=2000\0" \
|
||||
"tftptimeoutcountmax=5\0" \
|
||||
"bootpretryperiod=2000\0" \
|
||||
"autoload=false\0" \
|
||||
"shieldcmd=\0" \
|
||||
"tftp_recovery=tftpboot $kernel_addr recovery-image; tftpboot $fdt_addr recovery-dtb; " \
|
||||
"setenv bootargs rdinit=/etc/preinit console=$defaultconsole,115200 " \
|
||||
"debug ti_cpsw.rx_packet_max=1526; run shieldcmd; " \
|
||||
"bootz $kernel_addr - $fdt_addr\0" \
|
||||
"pxe_recovery=sleep 3 && dhcp && pxe get && pxe boot\0" \
|
||||
/* "bootcmd=run sdboot\0" */ \
|
||||
\
|
||||
/* Recovery boot */ \
|
||||
"recovery=run pxe_recovery || setenv ipaddr $ipaddr; setenv serverip $serverip; run tftp_recovery\0" \
|
||||
/* setenv ipaddr and serverip is necessary, because dhclient can destroy the IPs inernally */
|
||||
/* setenv ipaddr and serverip is necessary, because dhclient can destroy the IPs internally */ \
|
||||
"pxe_recovery=mdio up $ethprime && dhcp && pxe get && pxe boot\0" \
|
||||
"tftp_recovery=tftpboot $kernel_addr_r recovery-image; tftpboot $fdt_addr_r recovery-dtb; " /* kernel_addr_r ? */ \
|
||||
"setenv bootargs rdinit=/etc/preinit console=$defaultconsole,115200 " \
|
||||
"debug $ethopts; " \
|
||||
"bootz $kernel_addr_r - $fdt_addr_r\0" /* kernel_addr_r */
|
||||
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
/* TODO: Check if ok? */
|
||||
/* TODO: Check if ok for NRSW? */
|
||||
#define CONFIG_ZERO_BOOTDELAY_CHECK
|
||||
|
||||
/* UART Configuration */
|
||||
|
|
@ -299,10 +279,11 @@ int eth_phy_timeout(void);
|
|||
#define CONFIG_SYS_MEMTEST_START 0x84000000
|
||||
#define CONFIG_SYS_MEMTEST_END 0x87900000
|
||||
|
||||
/* TODO: Enable for NRSW support
|
||||
/* NRSW password protected login */
|
||||
#ifdef CONFIG_NRSW
|
||||
#define CONFIG_NM_LOGIN
|
||||
#define CONFIG_CRYPT
|
||||
*/
|
||||
#endif
|
||||
|
||||
#define CONFIG_CMD_PXE
|
||||
|
||||
|
|
@ -311,9 +292,12 @@ int eth_phy_timeout(void);
|
|||
#define CONFIG_JTAG_MARKER_SPL 0x402FFF00
|
||||
#define CONFIG_JTAG_MARKER_UBOOT 0x807FFF00
|
||||
|
||||
/* TODO: NRSW PMIC Reset Reason */
|
||||
/* NRSW PMIC Reset Reason */
|
||||
#ifdef CONFIG_NRSW
|
||||
#define RESET_REASON_SHM_LOCATION 0x8e000000
|
||||
#define EXTERNAL_WATCHDOG_PATTERN 0x781f9ce2
|
||||
#endif
|
||||
|
||||
|
||||
/* SPL command is not needed */
|
||||
#undef CONFIG_CMD_SPL
|
||||
|
|
|
|||
Loading…
Reference in New Issue