omap1510inn: arm925t: remove support
omap1510inn is orphan and has been for years now. Reove it and, as it was the only arm925t target, also remove arm925t support. Update doc/README.scrapyard accordingly. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
This commit is contained in:
Albert ARIBAUD
parent
ddd025bb6e
commit
0610a16cf2
1
MAKEALL
1
MAKEALL
|
|
@ -353,7 +353,6 @@ LIST_ARM7="$(boards_by_cpu arm720t)"
|
||||||
|
|
||||||
LIST_ARM9="$(boards_by_cpu arm920t) \
|
LIST_ARM9="$(boards_by_cpu arm920t) \
|
||||||
$(boards_by_cpu arm926ejs) \
|
$(boards_by_cpu arm926ejs) \
|
||||||
$(boards_by_cpu arm925t) \
|
|
||||||
$(boards_by_cpu arm946es) \
|
$(boards_by_cpu arm946es) \
|
||||||
"
|
"
|
||||||
|
|
||||||
|
|
|
||||||
1
README
1
README
|
|
@ -139,7 +139,6 @@ Directory Hierarchy:
|
||||||
/at91 Files specific to Atmel AT91RM9200 CPU
|
/at91 Files specific to Atmel AT91RM9200 CPU
|
||||||
/imx Files specific to Freescale MC9328 i.MX CPUs
|
/imx Files specific to Freescale MC9328 i.MX CPUs
|
||||||
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
|
/s3c24x0 Files specific to Samsung S3C24X0 CPUs
|
||||||
/arm925t Files specific to ARM 925 CPUs
|
|
||||||
/arm926ejs Files specific to ARM 926 CPUs
|
/arm926ejs Files specific to ARM 926 CPUs
|
||||||
/arm1136 Files specific to ARM 1136 CPUs
|
/arm1136 Files specific to ARM 1136 CPUs
|
||||||
/ixp Files specific to Intel XScale IXP CPUs
|
/ixp Files specific to Intel XScale IXP CPUs
|
||||||
|
|
|
||||||
|
|
@ -1,34 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
include $(TOPDIR)/config.mk
|
|
||||||
|
|
||||||
LIB = $(obj)lib$(CPU).o
|
|
||||||
|
|
||||||
START = start.o
|
|
||||||
|
|
||||||
COBJS += cpu.o
|
|
||||||
COBJS += omap925.o
|
|
||||||
COBJS += timer.o
|
|
||||||
|
|
||||||
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
|
||||||
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
|
|
||||||
START := $(addprefix $(obj),$(START))
|
|
||||||
|
|
||||||
all: $(obj).depend $(START) $(LIB)
|
|
||||||
|
|
||||||
$(LIB): $(OBJS)
|
|
||||||
$(call cmd_link_o_target, $(OBJS))
|
|
||||||
|
|
||||||
#########################################################################
|
|
||||||
|
|
||||||
# defines $(obj).depend target
|
|
||||||
include $(SRCTREE)/rules.mk
|
|
||||||
|
|
||||||
sinclude $(obj).depend
|
|
||||||
|
|
||||||
#########################################################################
|
|
||||||
|
|
@ -1,15 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2002
|
|
||||||
# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
PLATFORM_CPPFLAGS += -march=armv4
|
|
||||||
# =========================================================================
|
|
||||||
#
|
|
||||||
# Supply options according to compiler version
|
|
||||||
#
|
|
||||||
# =========================================================================
|
|
||||||
PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
|
|
||||||
PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
|
|
||||||
|
|
@ -1,50 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
||||||
* Marius Groeger <mgroeger@sysgo.de>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* CPU specific code
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <command.h>
|
|
||||||
#include <arm925t.h>
|
|
||||||
#include <asm/system.h>
|
|
||||||
|
|
||||||
static void cache_flush(void);
|
|
||||||
|
|
||||||
int cleanup_before_linux (void)
|
|
||||||
{
|
|
||||||
/*
|
|
||||||
* this function is called just before we call linux
|
|
||||||
* it prepares the processor for linux
|
|
||||||
*
|
|
||||||
* we turn off caches etc ...
|
|
||||||
*/
|
|
||||||
|
|
||||||
disable_interrupts ();
|
|
||||||
|
|
||||||
|
|
||||||
/* turn off I/D-cache */
|
|
||||||
icache_disable();
|
|
||||||
dcache_disable();
|
|
||||||
/* flush I/D-cache */
|
|
||||||
cache_flush();
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* flush I/D-cache */
|
|
||||||
static void cache_flush (void)
|
|
||||||
{
|
|
||||||
unsigned long i = 0;
|
|
||||||
|
|
||||||
asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
|
|
||||||
}
|
|
||||||
|
|
@ -1,23 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2003
|
|
||||||
* Texas Instruments <www.ti.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <command.h>
|
|
||||||
#include <arm925t.h>
|
|
||||||
|
|
||||||
#define MIF_CONFIG_REG 0xFFFECC0C
|
|
||||||
#define FLASH_GLOBAL_CTRL_NWP 1
|
|
||||||
|
|
||||||
void archflashwp (void *archdata, int wp)
|
|
||||||
{
|
|
||||||
ulong *fgc = (ulong *) MIF_CONFIG_REG;
|
|
||||||
|
|
||||||
if (wp == 1)
|
|
||||||
*fgc &= ~FLASH_GLOBAL_CTRL_NWP;
|
|
||||||
else
|
|
||||||
*fgc |= FLASH_GLOBAL_CTRL_NWP;
|
|
||||||
}
|
|
||||||
|
|
@ -1,382 +0,0 @@
|
||||||
/*
|
|
||||||
* armboot - Startup Code for ARM925 CPU-core
|
|
||||||
*
|
|
||||||
* Copyright (c) 2003 Texas Instruments
|
|
||||||
*
|
|
||||||
* ----- Adapted for OMAP1510 from ARM920 code ------
|
|
||||||
*
|
|
||||||
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
|
|
||||||
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
|
|
||||||
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
|
|
||||||
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
|
|
||||||
* Copyright (c) 2003 Kshitij <kshitij@ti.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <asm-offsets.h>
|
|
||||||
#include <config.h>
|
|
||||||
#include <version.h>
|
|
||||||
|
|
||||||
/*
|
|
||||||
*************************************************************************
|
|
||||||
*
|
|
||||||
* Jump vector table as in table 3.1 in [1]
|
|
||||||
*
|
|
||||||
*************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
.globl _start
|
|
||||||
_start: b reset
|
|
||||||
ldr pc, _undefined_instruction
|
|
||||||
ldr pc, _software_interrupt
|
|
||||||
ldr pc, _prefetch_abort
|
|
||||||
ldr pc, _data_abort
|
|
||||||
ldr pc, _not_used
|
|
||||||
ldr pc, _irq
|
|
||||||
ldr pc, _fiq
|
|
||||||
|
|
||||||
_undefined_instruction: .word undefined_instruction
|
|
||||||
_software_interrupt: .word software_interrupt
|
|
||||||
_prefetch_abort: .word prefetch_abort
|
|
||||||
_data_abort: .word data_abort
|
|
||||||
_not_used: .word not_used
|
|
||||||
_irq: .word irq
|
|
||||||
_fiq: .word fiq
|
|
||||||
|
|
||||||
.balignl 16,0xdeadbeef
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
*************************************************************************
|
|
||||||
*
|
|
||||||
* Startup Code (reset vector)
|
|
||||||
*
|
|
||||||
* do important init only if we don't start from memory!
|
|
||||||
* setup Memory and board specific bits prior to relocation.
|
|
||||||
* relocate armboot to ram
|
|
||||||
* setup stack
|
|
||||||
*
|
|
||||||
*************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
.globl _TEXT_BASE
|
|
||||||
_TEXT_BASE:
|
|
||||||
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_TEXT_BASE)
|
|
||||||
.word CONFIG_SPL_TEXT_BASE
|
|
||||||
#else
|
|
||||||
.word CONFIG_SYS_TEXT_BASE
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* These are defined in the board-specific linker script.
|
|
||||||
* Subtracting _start from them lets the linker put their
|
|
||||||
* relative position in the executable instead of leaving
|
|
||||||
* them null.
|
|
||||||
*/
|
|
||||||
.globl _bss_start_ofs
|
|
||||||
_bss_start_ofs:
|
|
||||||
.word __bss_start - _start
|
|
||||||
|
|
||||||
.globl _bss_end_ofs
|
|
||||||
_bss_end_ofs:
|
|
||||||
.word __bss_end - _start
|
|
||||||
|
|
||||||
.globl _end_ofs
|
|
||||||
_end_ofs:
|
|
||||||
.word _end - _start
|
|
||||||
|
|
||||||
#ifdef CONFIG_USE_IRQ
|
|
||||||
/* IRQ stack memory (calculated at run-time) */
|
|
||||||
.globl IRQ_STACK_START
|
|
||||||
IRQ_STACK_START:
|
|
||||||
.word 0x0badc0de
|
|
||||||
|
|
||||||
/* IRQ stack memory (calculated at run-time) */
|
|
||||||
.globl FIQ_STACK_START
|
|
||||||
FIQ_STACK_START:
|
|
||||||
.word 0x0badc0de
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* IRQ stack memory (calculated at run-time) + 8 bytes */
|
|
||||||
.globl IRQ_STACK_START_IN
|
|
||||||
IRQ_STACK_START_IN:
|
|
||||||
.word 0x0badc0de
|
|
||||||
|
|
||||||
/*
|
|
||||||
* the actual reset code
|
|
||||||
*/
|
|
||||||
|
|
||||||
reset:
|
|
||||||
/*
|
|
||||||
* set the cpu to SVC32 mode
|
|
||||||
*/
|
|
||||||
mrs r0,cpsr
|
|
||||||
bic r0,r0,#0x1f
|
|
||||||
orr r0,r0,#0xd3
|
|
||||||
msr cpsr,r0
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set up 925T mode
|
|
||||||
*/
|
|
||||||
mov r1, #0x81 /* Set ARM925T configuration. */
|
|
||||||
mcr p15, 0, r1, c15, c1, 0 /* Write ARM925T configuration register. */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* turn off the watchdog, unlock/diable sequence
|
|
||||||
*/
|
|
||||||
mov r1, #0xF5
|
|
||||||
ldr r0, =WDTIM_MODE
|
|
||||||
strh r1, [r0]
|
|
||||||
mov r1, #0xA0
|
|
||||||
strh r1, [r0]
|
|
||||||
|
|
||||||
/*
|
|
||||||
* mask all IRQs by setting all bits in the INTMR - default
|
|
||||||
*/
|
|
||||||
mov r1, #0xffffffff
|
|
||||||
ldr r0, =REG_IHL1_MIR
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, =REG_IHL2_MIR
|
|
||||||
str r1, [r0]
|
|
||||||
|
|
||||||
/*
|
|
||||||
* wait for dpll to lock
|
|
||||||
*/
|
|
||||||
ldr r0, =CK_DPLL1
|
|
||||||
mov r1, #0x10
|
|
||||||
strh r1, [r0]
|
|
||||||
poll1:
|
|
||||||
ldrh r1, [r0]
|
|
||||||
ands r1, r1, #0x01
|
|
||||||
beq poll1
|
|
||||||
|
|
||||||
/*
|
|
||||||
* we do sys-critical inits only at reboot,
|
|
||||||
* not when booting from ram!
|
|
||||||
*/
|
|
||||||
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
||||||
bl cpu_init_crit
|
|
||||||
#endif
|
|
||||||
|
|
||||||
bl _main
|
|
||||||
|
|
||||||
/*------------------------------------------------------------------------------*/
|
|
||||||
|
|
||||||
.globl c_runtime_cpu_setup
|
|
||||||
c_runtime_cpu_setup:
|
|
||||||
|
|
||||||
mov pc, lr
|
|
||||||
|
|
||||||
/*
|
|
||||||
*************************************************************************
|
|
||||||
*
|
|
||||||
* CPU_init_critical registers
|
|
||||||
*
|
|
||||||
* setup important registers
|
|
||||||
* setup memory timing
|
|
||||||
*
|
|
||||||
*************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
cpu_init_crit:
|
|
||||||
/*
|
|
||||||
* flush v4 I/D caches
|
|
||||||
*/
|
|
||||||
mov r0, #0
|
|
||||||
mcr p15, 0, r0, c7, c7, 0 /* flush v3/v4 cache */
|
|
||||||
mcr p15, 0, r0, c8, c7, 0 /* flush v4 TLB */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* disable MMU stuff and caches
|
|
||||||
*/
|
|
||||||
mrc p15, 0, r0, c1, c0, 0
|
|
||||||
bic r0, r0, #0x00002300 @ clear bits 13, 9:8 (--V- --RS)
|
|
||||||
bic r0, r0, #0x00000087 @ clear bits 7, 2:0 (B--- -CAM)
|
|
||||||
orr r0, r0, #0x00000002 @ set bit 2 (A) Align
|
|
||||||
orr r0, r0, #0x00001000 @ set bit 12 (I) I-Cache
|
|
||||||
mcr p15, 0, r0, c1, c0, 0
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Go setup Memory and board specific bits prior to relocation.
|
|
||||||
*/
|
|
||||||
mov ip, lr /* perserve link reg across call */
|
|
||||||
bl lowlevel_init /* go setup pll,mux,memory */
|
|
||||||
mov lr, ip /* restore link */
|
|
||||||
mov pc, lr /* back to my caller */
|
|
||||||
/*
|
|
||||||
*************************************************************************
|
|
||||||
*
|
|
||||||
* Interrupt handling
|
|
||||||
*
|
|
||||||
*************************************************************************
|
|
||||||
*/
|
|
||||||
|
|
||||||
@
|
|
||||||
@ IRQ stack frame.
|
|
||||||
@
|
|
||||||
#define S_FRAME_SIZE 72
|
|
||||||
|
|
||||||
#define S_OLD_R0 68
|
|
||||||
#define S_PSR 64
|
|
||||||
#define S_PC 60
|
|
||||||
#define S_LR 56
|
|
||||||
#define S_SP 52
|
|
||||||
|
|
||||||
#define S_IP 48
|
|
||||||
#define S_FP 44
|
|
||||||
#define S_R10 40
|
|
||||||
#define S_R9 36
|
|
||||||
#define S_R8 32
|
|
||||||
#define S_R7 28
|
|
||||||
#define S_R6 24
|
|
||||||
#define S_R5 20
|
|
||||||
#define S_R4 16
|
|
||||||
#define S_R3 12
|
|
||||||
#define S_R2 8
|
|
||||||
#define S_R1 4
|
|
||||||
#define S_R0 0
|
|
||||||
|
|
||||||
#define MODE_SVC 0x13
|
|
||||||
#define I_BIT 0x80
|
|
||||||
|
|
||||||
/*
|
|
||||||
* use bad_save_user_regs for abort/prefetch/undef/swi ...
|
|
||||||
* use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
|
|
||||||
*/
|
|
||||||
|
|
||||||
.macro bad_save_user_regs
|
|
||||||
sub sp, sp, #S_FRAME_SIZE @ carve out a frame on current user stack
|
|
||||||
stmia sp, {r0 - r12} @ Save user registers (now in svc mode) r0-r12
|
|
||||||
|
|
||||||
ldr r2, IRQ_STACK_START_IN
|
|
||||||
ldmia r2, {r2 - r3} @ get values for "aborted" pc and cpsr (into parm regs)
|
|
||||||
add r0, sp, #S_FRAME_SIZE @ grab pointer to old stack
|
|
||||||
|
|
||||||
add r5, sp, #S_SP
|
|
||||||
mov r1, lr
|
|
||||||
stmia r5, {r0 - r3} @ save sp_SVC, lr_SVC, pc, cpsr
|
|
||||||
mov r0, sp @ save current stack into r0 (param register)
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro irq_save_user_regs
|
|
||||||
sub sp, sp, #S_FRAME_SIZE
|
|
||||||
stmia sp, {r0 - r12} @ Calling r0-r12
|
|
||||||
add r8, sp, #S_PC @ !!!! R8 NEEDS to be saved !!!! a reserved stack spot would be good.
|
|
||||||
stmdb r8, {sp, lr}^ @ Calling SP, LR
|
|
||||||
str lr, [r8, #0] @ Save calling PC
|
|
||||||
mrs r6, spsr
|
|
||||||
str r6, [r8, #4] @ Save CPSR
|
|
||||||
str r0, [r8, #8] @ Save OLD_R0
|
|
||||||
mov r0, sp
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro irq_restore_user_regs
|
|
||||||
ldmia sp, {r0 - lr}^ @ Calling r0 - lr
|
|
||||||
mov r0, r0
|
|
||||||
ldr lr, [sp, #S_PC] @ Get PC
|
|
||||||
add sp, sp, #S_FRAME_SIZE
|
|
||||||
subs pc, lr, #4 @ return & move spsr_svc into cpsr
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro get_bad_stack
|
|
||||||
ldr r13, IRQ_STACK_START_IN
|
|
||||||
|
|
||||||
str lr, [r13] @ save caller lr in position 0 of saved stack
|
|
||||||
mrs lr, spsr @ get the spsr
|
|
||||||
str lr, [r13, #4] @ save spsr in position 1 of saved stack
|
|
||||||
|
|
||||||
mov r13, #MODE_SVC @ prepare SVC-Mode
|
|
||||||
@ msr spsr_c, r13
|
|
||||||
msr spsr, r13 @ switch modes, make sure moves will execute
|
|
||||||
mov lr, pc @ capture return pc
|
|
||||||
movs pc, lr @ jump to next instruction & switch modes.
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro get_irq_stack @ setup IRQ stack
|
|
||||||
ldr sp, IRQ_STACK_START
|
|
||||||
.endm
|
|
||||||
|
|
||||||
.macro get_fiq_stack @ setup FIQ stack
|
|
||||||
ldr sp, FIQ_STACK_START
|
|
||||||
.endm
|
|
||||||
|
|
||||||
/*
|
|
||||||
* exception handlers
|
|
||||||
*/
|
|
||||||
.align 5
|
|
||||||
undefined_instruction:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_undefined_instruction
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
software_interrupt:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_software_interrupt
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
prefetch_abort:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_prefetch_abort
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
data_abort:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_data_abort
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
not_used:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_not_used
|
|
||||||
|
|
||||||
#ifdef CONFIG_USE_IRQ
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
irq:
|
|
||||||
get_irq_stack
|
|
||||||
irq_save_user_regs
|
|
||||||
bl do_irq
|
|
||||||
irq_restore_user_regs
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
fiq:
|
|
||||||
get_fiq_stack
|
|
||||||
/* someone ought to write a more effiction fiq_save_user_regs */
|
|
||||||
irq_save_user_regs
|
|
||||||
bl do_fiq
|
|
||||||
irq_restore_user_regs
|
|
||||||
|
|
||||||
#else
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
irq:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_irq
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
fiq:
|
|
||||||
get_bad_stack
|
|
||||||
bad_save_user_regs
|
|
||||||
bl do_fiq
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
||||||
.align 5
|
|
||||||
.globl reset_cpu
|
|
||||||
reset_cpu:
|
|
||||||
ldr r1, rstctl1 /* get clkm1 reset ctl */
|
|
||||||
mov r3, #0x3 /* dsp_en + arm_rst = global reset */
|
|
||||||
strh r3, [r1] /* force reset */
|
|
||||||
mov r0, r0
|
|
||||||
_loop_forever:
|
|
||||||
b _loop_forever
|
|
||||||
rstctl1:
|
|
||||||
.word 0xfffece10
|
|
||||||
|
|
@ -1,104 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2009
|
|
||||||
* 2N Telekomunikace, <www.2n.cz>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2003
|
|
||||||
* Texas Instruments, <www.ti.com>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
||||||
* Marius Groeger <mgroeger@sysgo.de>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
||||||
* Alex Zuepke <azu@sysgo.de>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <arm925t.h>
|
|
||||||
#include <configs/omap1510.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
|
|
||||||
#define TIMER_LOAD_VAL 0xffffffff
|
|
||||||
#define TIMER_CLOCK (CONFIG_SYS_CLK_FREQ / (2 << CONFIG_SYS_PTV))
|
|
||||||
|
|
||||||
static uint32_t timestamp;
|
|
||||||
static uint32_t lastdec;
|
|
||||||
|
|
||||||
/* nothing really to do with interrupts, just starts up a counter. */
|
|
||||||
int timer_init (void)
|
|
||||||
{
|
|
||||||
/* Start the decrementer ticking down from 0xffffffff */
|
|
||||||
__raw_writel(TIMER_LOAD_VAL, CONFIG_SYS_TIMERBASE + LOAD_TIM);
|
|
||||||
__raw_writel(MPUTIM_ST | MPUTIM_AR | MPUTIM_CLOCK_ENABLE |
|
|
||||||
(CONFIG_SYS_PTV << MPUTIM_PTV_BIT),
|
|
||||||
CONFIG_SYS_TIMERBASE + CNTL_TIMER);
|
|
||||||
|
|
||||||
/* init the timestamp and lastdec value */
|
|
||||||
lastdec = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) /
|
|
||||||
(TIMER_CLOCK / CONFIG_SYS_HZ);
|
|
||||||
timestamp = 0; /* start "advancing" time stamp from 0 */
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* timer without interrupts
|
|
||||||
*/
|
|
||||||
ulong get_timer (ulong base)
|
|
||||||
{
|
|
||||||
return get_timer_masked () - base;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* delay x useconds AND preserve advance timestamp value */
|
|
||||||
void __udelay (unsigned long usec)
|
|
||||||
{
|
|
||||||
int32_t tmo = usec * (TIMER_CLOCK / 1000) / 1000;
|
|
||||||
uint32_t now, last = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
|
|
||||||
|
|
||||||
while (tmo > 0) {
|
|
||||||
now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM);
|
|
||||||
if (last < now) /* count down timer underflow */
|
|
||||||
tmo -= TIMER_LOAD_VAL - now + last;
|
|
||||||
else
|
|
||||||
tmo -= last - now;
|
|
||||||
last = now;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
ulong get_timer_masked (void)
|
|
||||||
{
|
|
||||||
uint32_t now = __raw_readl(CONFIG_SYS_TIMERBASE + READ_TIM) /
|
|
||||||
(TIMER_CLOCK / CONFIG_SYS_HZ);
|
|
||||||
if (lastdec < now) /* count down timer underflow */
|
|
||||||
timestamp += TIMER_LOAD_VAL / (TIMER_CLOCK / CONFIG_SYS_HZ) -
|
|
||||||
now + lastdec;
|
|
||||||
else
|
|
||||||
timestamp += lastdec - now;
|
|
||||||
lastdec = now;
|
|
||||||
|
|
||||||
return timestamp;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* This function is derived from PowerPC code (read timebase as long long).
|
|
||||||
* On ARM it just returns the timer value.
|
|
||||||
*/
|
|
||||||
unsigned long long get_ticks(void)
|
|
||||||
{
|
|
||||||
return get_timer(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* This function is derived from PowerPC code (timebase clock frequency).
|
|
||||||
* On ARM it returns the number of timer ticks per second.
|
|
||||||
*/
|
|
||||||
ulong get_tbclk (void)
|
|
||||||
{
|
|
||||||
return CONFIG_SYS_HZ;
|
|
||||||
}
|
|
||||||
|
|
@ -1,29 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2000-2006
|
|
||||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
||||||
#
|
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
|
|
||||||
include $(TOPDIR)/config.mk
|
|
||||||
|
|
||||||
LIB = $(obj)lib$(BOARD).o
|
|
||||||
|
|
||||||
COBJS := omap1510innovator.o
|
|
||||||
SOBJS := lowlevel_init.o
|
|
||||||
|
|
||||||
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
|
|
||||||
OBJS := $(addprefix $(obj),$(COBJS))
|
|
||||||
SOBJS := $(addprefix $(obj),$(SOBJS))
|
|
||||||
|
|
||||||
$(LIB): $(obj).depend $(OBJS) $(SOBJS)
|
|
||||||
$(call cmd_link_o_target, $(OBJS) $(SOBJS))
|
|
||||||
|
|
||||||
#########################################################################
|
|
||||||
|
|
||||||
# defines $(obj).depend target
|
|
||||||
include $(SRCTREE)/rules.mk
|
|
||||||
|
|
||||||
sinclude $(obj).depend
|
|
||||||
|
|
||||||
#########################################################################
|
|
||||||
|
|
@ -1,25 +0,0 @@
|
||||||
#
|
|
||||||
# (C) Copyright 2002
|
|
||||||
# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
|
||||||
# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
||||||
#
|
|
||||||
# (C) Copyright 2003
|
|
||||||
# Texas Instruments, <www.ti.com>
|
|
||||||
# Kshitij Gupta <Kshitij@ti.com>
|
|
||||||
#
|
|
||||||
# TI Innovator board with OMAP1510 (ARM925T) cpu
|
|
||||||
# see http://www.ti.com/ for more information on Texas Insturments
|
|
||||||
#
|
|
||||||
# Innovator has 1 bank of 256 MB SDRAM
|
|
||||||
# Physical Address:
|
|
||||||
# 1000'0000 to 2000'0000
|
|
||||||
#
|
|
||||||
#
|
|
||||||
# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved)
|
|
||||||
#
|
|
||||||
# we load ourself to 1108'0000
|
|
||||||
#
|
|
||||||
#
|
|
||||||
|
|
||||||
|
|
||||||
CONFIG_SYS_TEXT_BASE = 0x11080000
|
|
||||||
|
|
@ -1,380 +0,0 @@
|
||||||
/*
|
|
||||||
* Board specific setup info
|
|
||||||
*
|
|
||||||
* (C) Copyright 2003
|
|
||||||
* Texas Instruments, <www.ti.com>
|
|
||||||
*
|
|
||||||
* -- Some bits of code used from rrload's head_OMAP1510.s --
|
|
||||||
* Copyright (C) 2002 RidgeRun, Inc.
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <config.h>
|
|
||||||
#include <version.h>
|
|
||||||
|
|
||||||
#if defined(CONFIG_OMAP1510)
|
|
||||||
#include <./configs/omap1510.h>
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
|
|
||||||
|
|
||||||
|
|
||||||
_TEXT_BASE:
|
|
||||||
.word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
|
|
||||||
|
|
||||||
.globl lowlevel_init
|
|
||||||
lowlevel_init:
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Configure 1510 pins functions to match our board.
|
|
||||||
*/
|
|
||||||
ldr r0, REG_PULL_DWN_CTRL_0
|
|
||||||
ldr r1, VAL_PULL_DWN_CTRL_0
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_PULL_DWN_CTRL_1
|
|
||||||
ldr r1, VAL_PULL_DWN_CTRL_1
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_PULL_DWN_CTRL_2
|
|
||||||
ldr r1, VAL_PULL_DWN_CTRL_2
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_PULL_DWN_CTRL_3
|
|
||||||
ldr r1, VAL_PULL_DWN_CTRL_3
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_4
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_4
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_5
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_5
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_6
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_6
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_7
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_7
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_8
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_8
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_9
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_9
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_A
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_A
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_B
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_B
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_C
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_C
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_FUNC_MUX_CTRL_D
|
|
||||||
ldr r1, VAL_FUNC_MUX_CTRL_D
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_VOLTAGE_CTRL_0
|
|
||||||
ldr r1, VAL_VOLTAGE_CTRL_0
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_TEST_DBG_CTRL_0
|
|
||||||
ldr r1, VAL_TEST_DBG_CTRL_0
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_MOD_CONF_CTRL_0
|
|
||||||
ldr r1, VAL_MOD_CONF_CTRL_0
|
|
||||||
str r1, [r0]
|
|
||||||
|
|
||||||
/* Move to 1510 mode */
|
|
||||||
ldr r0, REG_COMP_MODE_CTRL_0
|
|
||||||
ldr r1, VAL_COMP_MODE_CTRL_0
|
|
||||||
str r1, [r0]
|
|
||||||
|
|
||||||
/* Set up Traffic Ctlr*/
|
|
||||||
ldr r0, REG_TC_IMIF_PRIO
|
|
||||||
mov r1, #0x0
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_TC_EMIFS_PRIO
|
|
||||||
str r1, [r0]
|
|
||||||
ldr r0, REG_TC_EMIFF_PRIO
|
|
||||||
str r1, [r0]
|
|
||||||
|
|
||||||
ldr r0, REG_TC_EMIFS_CONFIG
|
|
||||||
ldr r1, [r0]
|
|
||||||
bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */
|
|
||||||
bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */
|
|
||||||
str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */
|
|
||||||
|
|
||||||
/* Setup some clock domains */
|
|
||||||
ldr r1, =OMAP1510_CLKS
|
|
||||||
ldr r0, REG_ARM_IDLECT2
|
|
||||||
strh r1, [r0] /* CLKM, Clock domain control. */
|
|
||||||
|
|
||||||
mov r1, #0x01 /* PER_EN bit */
|
|
||||||
ldr r0, REG_ARM_RSTCT2
|
|
||||||
strh r1, [r0] /* CLKM; Peripheral reset. */
|
|
||||||
|
|
||||||
/* Set CLKM to Sync-Scalable */
|
|
||||||
/* I supposidly need to enable the dsp clock before switching */
|
|
||||||
mov r1, #0x1000
|
|
||||||
ldr r0, REG_ARM_SYSST
|
|
||||||
strh r1, [r0]
|
|
||||||
mov r0, #0x400
|
|
||||||
1:
|
|
||||||
subs r0, r0, #0x1 /* wait for any bubbles to finish */
|
|
||||||
bne 1b
|
|
||||||
|
|
||||||
ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
|
|
||||||
ldr r0, REG_ARM_CKCTL
|
|
||||||
strh r1, [r0]
|
|
||||||
|
|
||||||
/* setup DPLL 1 */
|
|
||||||
ldr r1, VAL_DPLL1_CTL
|
|
||||||
ldr r0, REG_DPLL1_CTL
|
|
||||||
strh r1, [r0]
|
|
||||||
ands r1, r1, #0x10 /* Check if PLL is enabled. */
|
|
||||||
beq lock_end /* Do not look for lock if BYPASS selected */
|
|
||||||
2:
|
|
||||||
ldrh r1, [r0]
|
|
||||||
ands r1, r1, #0x01 /* Check the LOCK bit. */
|
|
||||||
beq 2b /* ...loop until bit goes hi. */
|
|
||||||
lock_end:
|
|
||||||
|
|
||||||
/* Set memory timings corresponding to the new clock speed */
|
|
||||||
|
|
||||||
/* Check execution location to determine current execution location
|
|
||||||
* and branch to appropriate initialization code.
|
|
||||||
*/
|
|
||||||
mov r0, #0x10000000 /* Load physical SDRAM base. */
|
|
||||||
mov r1, pc /* Get current execution location. */
|
|
||||||
/* Zero all but top 6 bits of PC, as they alone detect whether an
|
|
||||||
* address is in the range 0x1000:0000-0x13ff:ffff, the 64M sized
|
|
||||||
* valid range for SDRAM on the OMAP 1510/5910.
|
|
||||||
*/
|
|
||||||
and r1, r1, #0xfc000000
|
|
||||||
cmp r1, r0 /* Compare. */
|
|
||||||
beq skip_sdram /* Skip over EMIF-fast initialization
|
|
||||||
* if running from SDRAM.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Delay for SDRAM initialization.
|
|
||||||
*/
|
|
||||||
mov r3, #0x1800 /* value should be checked */
|
|
||||||
3:
|
|
||||||
subs r3, r3, #0x1 /* Decrement count */
|
|
||||||
bne 3b
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set SDRAM control values. Disable refresh before MRS command.
|
|
||||||
*/
|
|
||||||
ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */
|
|
||||||
bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
|
|
||||||
orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */
|
|
||||||
orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */
|
|
||||||
ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
|
|
||||||
str r3, [r2] /* Store the passed value with AR disabled. */
|
|
||||||
|
|
||||||
ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */
|
|
||||||
ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */
|
|
||||||
str r1, [r2] /* Store the passed value.*/
|
|
||||||
|
|
||||||
ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */
|
|
||||||
str r0, [r2] /* Store the passed value. */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Delay for SDRAM initialization.
|
|
||||||
*/
|
|
||||||
mov r3, #0x1800
|
|
||||||
4:
|
|
||||||
subs r3, r3, #1 /* Decrement count. */
|
|
||||||
bne 4b
|
|
||||||
|
|
||||||
skip_sdram:
|
|
||||||
|
|
||||||
/* slow interface */
|
|
||||||
ldr r1, VAL_TC_EMIFS_CS0_CONFIG
|
|
||||||
ldr r0, REG_TC_EMIFS_CS0_CONFIG
|
|
||||||
str r1, [r0] /* Chip Select 0 */
|
|
||||||
ldr r1, VAL_TC_EMIFS_CS1_CONFIG
|
|
||||||
ldr r0, REG_TC_EMIFS_CS1_CONFIG
|
|
||||||
str r1, [r0] /* Chip Select 1 */
|
|
||||||
ldr r1, VAL_TC_EMIFS_CS2_CONFIG
|
|
||||||
ldr r0, REG_TC_EMIFS_CS2_CONFIG
|
|
||||||
str r1, [r0] /* Chip Select 2 */
|
|
||||||
ldr r1, VAL_TC_EMIFS_CS3_CONFIG
|
|
||||||
ldr r0, REG_TC_EMIFS_CS3_CONFIG
|
|
||||||
str r1, [r0] /* Chip Select 3 */
|
|
||||||
|
|
||||||
/* Next, Enable the RS232 Line Drivers in the FPGA. */
|
|
||||||
/* Also, power on the audio CODEC's amplifier here, */
|
|
||||||
/* which will make a noise on the audio output. */
|
|
||||||
/* This is done here instead of in the kernel so there */
|
|
||||||
/* isn't a loud popping noise at the start of each */
|
|
||||||
/* song. */
|
|
||||||
/* Also, disable the CODEC's clocks. */
|
|
||||||
/* omap1510-HelenP1 [specific] */
|
|
||||||
|
|
||||||
ldr r0, REG_FPGA_POWER
|
|
||||||
mov r1, #0
|
|
||||||
ldr r2, REG_FPGA_DIP_SWITCH
|
|
||||||
ldrb r3, [r2]
|
|
||||||
cmp r3, #0x8
|
|
||||||
movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */
|
|
||||||
strb r1, [r0]
|
|
||||||
ldr r0, REG_FPGA_AUDIO
|
|
||||||
mov r1, #0x0 /* Disable sound driver (CODEC clocks) */
|
|
||||||
strb r1, [r0]
|
|
||||||
|
|
||||||
/* back to arch calling code */
|
|
||||||
mov pc, lr
|
|
||||||
|
|
||||||
/* the literal pools origin */
|
|
||||||
.ltorg
|
|
||||||
|
|
||||||
/* OMAP configuration registers */
|
|
||||||
REG_FUNC_MUX_CTRL_0: /* 32 bits */
|
|
||||||
.word 0xfffe1000
|
|
||||||
REG_FUNC_MUX_CTRL_1: /* 32 bits */
|
|
||||||
.word 0xfffe1004
|
|
||||||
REG_FUNC_MUX_CTRL_2: /* 32 bits */
|
|
||||||
.word 0xfffe1008
|
|
||||||
REG_COMP_MODE_CTRL_0: /* 32 bits */
|
|
||||||
.word 0xfffe100c
|
|
||||||
REG_FUNC_MUX_CTRL_3: /* 32 bits */
|
|
||||||
.word 0xfffe1010
|
|
||||||
REG_FUNC_MUX_CTRL_4: /* 32 bits */
|
|
||||||
.word 0xfffe1014
|
|
||||||
REG_FUNC_MUX_CTRL_5: /* 32 bits */
|
|
||||||
.word 0xfffe1018
|
|
||||||
REG_FUNC_MUX_CTRL_6: /* 32 bits */
|
|
||||||
.word 0xfffe101c
|
|
||||||
REG_FUNC_MUX_CTRL_7: /* 32 bits */
|
|
||||||
.word 0xfffe1020
|
|
||||||
REG_FUNC_MUX_CTRL_8: /* 32 bits */
|
|
||||||
.word 0xfffe1024
|
|
||||||
REG_FUNC_MUX_CTRL_9: /* 32 bits */
|
|
||||||
.word 0xfffe1028
|
|
||||||
REG_FUNC_MUX_CTRL_A: /* 32 bits */
|
|
||||||
.word 0xfffe102C
|
|
||||||
REG_FUNC_MUX_CTRL_B: /* 32 bits */
|
|
||||||
.word 0xfffe1030
|
|
||||||
REG_FUNC_MUX_CTRL_C: /* 32 bits */
|
|
||||||
.word 0xfffe1034
|
|
||||||
REG_FUNC_MUX_CTRL_D: /* 32 bits */
|
|
||||||
.word 0xfffe1038
|
|
||||||
REG_PULL_DWN_CTRL_0: /* 32 bits */
|
|
||||||
.word 0xfffe1040
|
|
||||||
REG_PULL_DWN_CTRL_1: /* 32 bits */
|
|
||||||
.word 0xfffe1044
|
|
||||||
REG_PULL_DWN_CTRL_2: /* 32 bits */
|
|
||||||
.word 0xfffe1048
|
|
||||||
REG_PULL_DWN_CTRL_3: /* 32 bits */
|
|
||||||
.word 0xfffe104c
|
|
||||||
REG_VOLTAGE_CTRL_0: /* 32 bits */
|
|
||||||
.word 0xfffe1060
|
|
||||||
REG_TEST_DBG_CTRL_0: /* 32 bits */
|
|
||||||
.word 0xfffe1070
|
|
||||||
REG_MOD_CONF_CTRL_0: /* 32 bits */
|
|
||||||
.word 0xfffe1080
|
|
||||||
REG_TC_IMIF_PRIO: /* 32 bits */
|
|
||||||
.word 0xfffecc00
|
|
||||||
REG_TC_EMIFS_PRIO: /* 32 bits */
|
|
||||||
.word 0xfffecc04
|
|
||||||
REG_TC_EMIFF_PRIO: /* 32 bits */
|
|
||||||
.word 0xfffecc08
|
|
||||||
REG_TC_EMIFS_CONFIG: /* 32 bits */
|
|
||||||
.word 0xfffecc0c
|
|
||||||
REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */
|
|
||||||
.word 0xfffecc10
|
|
||||||
REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */
|
|
||||||
.word 0xfffecc14
|
|
||||||
REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */
|
|
||||||
.word 0xfffecc18
|
|
||||||
REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */
|
|
||||||
.word 0xfffecc1c
|
|
||||||
REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */
|
|
||||||
.word 0xfffecc20
|
|
||||||
REG_TC_EMIFF_MRS: /* 32 bits */
|
|
||||||
.word 0xfffecc24
|
|
||||||
/* MPU clock/reset/power mode control registers */
|
|
||||||
REG_ARM_CKCTL: /* 16 bits */
|
|
||||||
.word 0xfffece00
|
|
||||||
REG_ARM_IDLECT2: /* 16 bits */
|
|
||||||
.word 0xfffece08
|
|
||||||
REG_ARM_RSTCT2: /* 16 bits */
|
|
||||||
.word 0xfffece14
|
|
||||||
REG_ARM_SYSST: /* 16 bits */
|
|
||||||
.word 0xfffece18
|
|
||||||
/* DPLL control registers */
|
|
||||||
REG_DPLL1_CTL: /* 16 bits */
|
|
||||||
.word 0xfffecf00
|
|
||||||
/* identification code register */
|
|
||||||
REG_IDCODE: /* 32 bits */
|
|
||||||
.word 0xfffed404
|
|
||||||
|
|
||||||
/* Innovator specific */
|
|
||||||
REG_FPGA_LED_DIGIT: /* 8 bits (not used on Innovator) */
|
|
||||||
.word 0x08000003
|
|
||||||
REG_FPGA_POWER: /* 8 bits */
|
|
||||||
.word 0x08000005
|
|
||||||
REG_FPGA_AUDIO: /* 8 bits (not used on Innovator) */
|
|
||||||
.word 0x0800000c
|
|
||||||
REG_FPGA_DIP_SWITCH: /* 8 bits (not used on Innovator) */
|
|
||||||
.word 0x0800000e
|
|
||||||
|
|
||||||
VAL_COMP_MODE_CTRL_0:
|
|
||||||
.word 0x0000eaef
|
|
||||||
VAL_FUNC_MUX_CTRL_4:
|
|
||||||
.word 0x00000000
|
|
||||||
VAL_FUNC_MUX_CTRL_5:
|
|
||||||
.word 0x00000000
|
|
||||||
VAL_FUNC_MUX_CTRL_6:
|
|
||||||
.word 0x00000001
|
|
||||||
VAL_FUNC_MUX_CTRL_7:
|
|
||||||
.word 0x00000000
|
|
||||||
VAL_FUNC_MUX_CTRL_8:
|
|
||||||
.word 0x10001200
|
|
||||||
VAL_FUNC_MUX_CTRL_9:
|
|
||||||
.word 0x01201012
|
|
||||||
VAL_FUNC_MUX_CTRL_A:
|
|
||||||
.word 0x00000248
|
|
||||||
VAL_FUNC_MUX_CTRL_B:
|
|
||||||
.word 0x00000248
|
|
||||||
VAL_FUNC_MUX_CTRL_C:
|
|
||||||
.word 0x09000000
|
|
||||||
VAL_FUNC_MUX_CTRL_D:
|
|
||||||
.word 0x00000000
|
|
||||||
VAL_PULL_DWN_CTRL_0:
|
|
||||||
.word 0x11a10000
|
|
||||||
VAL_PULL_DWN_CTRL_1:
|
|
||||||
.word 0x2e047fff
|
|
||||||
VAL_PULL_DWN_CTRL_2:
|
|
||||||
.word 0xffd603a6
|
|
||||||
VAL_PULL_DWN_CTRL_3:
|
|
||||||
.word 0x00003e03
|
|
||||||
VAL_VOLTAGE_CTRL_0:
|
|
||||||
.word 0x00000007
|
|
||||||
VAL_TEST_DBG_CTRL_0:
|
|
||||||
/* See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 .
|
|
||||||
* This slows down internal SRAM accesses.
|
|
||||||
*/
|
|
||||||
.word 0x00000007
|
|
||||||
VAL_MOD_CONF_CTRL_0:
|
|
||||||
.word 0x0b000008
|
|
||||||
VAL_ARM_CKCTL:
|
|
||||||
.word 0x010f
|
|
||||||
VAL_DPLL1_CTL:
|
|
||||||
.word 0x2710
|
|
||||||
VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
|
|
||||||
.word 0x00001149
|
|
||||||
VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
|
|
||||||
.word 0x00004158
|
|
||||||
VAL_TC_EMIFS_CS0_CONFIG:
|
|
||||||
.word 0x002130b0
|
|
||||||
VAL_TC_EMIFS_CS1_CONFIG:
|
|
||||||
.word 0x0000f559
|
|
||||||
VAL_TC_EMIFS_CS2_CONFIG:
|
|
||||||
.word 0x000055f0
|
|
||||||
VAL_TC_EMIFS_CS3_CONFIG:
|
|
||||||
.word 0x00003331
|
|
||||||
VAL_TC_EMIFF_SDRAM_CONFIG:
|
|
||||||
.word 0x010290fc
|
|
||||||
VAL_TC_EMIFF_MRS:
|
|
||||||
.word 0x00000027
|
|
||||||
|
|
@ -1,125 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
||||||
* Marius Groeger <mgroeger@sysgo.de>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2002
|
|
||||||
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
||||||
*
|
|
||||||
* (C) Copyright 2003
|
|
||||||
* Texas Instruments, <www.ti.com>
|
|
||||||
* Kshitij Gupta <Kshitij@ti.com>
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <netdev.h>
|
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR;
|
|
||||||
|
|
||||||
static void flash__init (void);
|
|
||||||
static void ether__init (void);
|
|
||||||
|
|
||||||
static inline void delay (unsigned long loops)
|
|
||||||
{
|
|
||||||
__asm__ volatile ("1:\n"
|
|
||||||
"subs %0, %1, #1\n"
|
|
||||||
"bne 1b":"=r" (loops):"0" (loops));
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous platform dependent initialisations
|
|
||||||
*/
|
|
||||||
|
|
||||||
int board_init (void)
|
|
||||||
{
|
|
||||||
/* arch number of OMAP 1510-Board */
|
|
||||||
gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
|
|
||||||
|
|
||||||
/* adress of boot parameters */
|
|
||||||
gd->bd->bi_boot_params = 0x10000100;
|
|
||||||
|
|
||||||
/* kk - this speeds up your boot a quite a bit. However to make it
|
|
||||||
* work, you need make sure your kernel startup flush bug is fixed.
|
|
||||||
* ... rkw ...
|
|
||||||
*/
|
|
||||||
icache_enable ();
|
|
||||||
|
|
||||||
flash__init ();
|
|
||||||
ether__init ();
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
int misc_init_r (void)
|
|
||||||
{
|
|
||||||
/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
|
|
||||||
/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
|
|
||||||
|
|
||||||
/* setup gpio direction to match board (no floats!) */
|
|
||||||
/**gdir = 0xCFF9; */
|
|
||||||
/**mdir = 0x103F; */
|
|
||||||
|
|
||||||
return (0);
|
|
||||||
}
|
|
||||||
|
|
||||||
/******************************
|
|
||||||
Routine:
|
|
||||||
Description:
|
|
||||||
******************************/
|
|
||||||
static void flash__init (void)
|
|
||||||
{
|
|
||||||
#define CS0_CHIP_SELECT_REG 0xfffecc10
|
|
||||||
#define CS3_CHIP_SELECT_REG 0xfffecc1c
|
|
||||||
#define EMIFS_GlB_Config_REG 0xfffecc0c
|
|
||||||
|
|
||||||
{
|
|
||||||
unsigned int regval;
|
|
||||||
|
|
||||||
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
|
|
||||||
regval = regval | 0x0001; /* Turn off write protection for flash devices. */
|
|
||||||
if (regval & 0x0002) {
|
|
||||||
regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
|
|
||||||
/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
|
|
||||||
/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
|
|
||||||
/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
|
|
||||||
}
|
|
||||||
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
/******************************
|
|
||||||
Routine:
|
|
||||||
Description:
|
|
||||||
******************************/
|
|
||||||
static void ether__init (void)
|
|
||||||
{
|
|
||||||
#define ETH_CONTROL_REG 0x0800000b
|
|
||||||
/* take the Ethernet controller out of reset and wait
|
|
||||||
* for the EEPROM load to complete.
|
|
||||||
*/
|
|
||||||
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
|
|
||||||
udelay (3);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
int dram_init (void)
|
|
||||||
{
|
|
||||||
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
||||||
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#ifdef CONFIG_CMD_NET
|
|
||||||
int board_eth_init(bd_t *bis)
|
|
||||||
{
|
|
||||||
int rc = 0;
|
|
||||||
#ifdef CONFIG_LAN91C96
|
|
||||||
rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
|
|
||||||
#endif
|
|
||||||
return rc;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
@ -1189,7 +1189,6 @@ Active sparc leon3 - gaisler -
|
||||||
Active x86 x86 coreboot chromebook-x86 coreboot coreboot-x86 coreboot:SYS_TEXT_BASE=0x01110000 -
|
Active x86 x86 coreboot chromebook-x86 coreboot coreboot-x86 coreboot:SYS_TEXT_BASE=0x01110000 -
|
||||||
Orphan arm arm1136 mx31 - imx31_phycore imx31_phycore_eet imx31_phycore:IMX31_PHYCORE_EET (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
Orphan arm arm1136 mx31 - imx31_phycore imx31_phycore_eet imx31_phycore:IMX31_PHYCORE_EET (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
||||||
Orphan arm arm1136 mx31 freescale - mx31ads - (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
Orphan arm arm1136 mx31 freescale - mx31ads - (resigned) Guennadi Liakhovetski <g.liakhovetski@gmx.de>
|
||||||
Orphan arm arm925t - ti - omap1510inn - Kshitij Gupta <kshitij@ti.com>
|
|
||||||
Orphan arm pxa - - - lubbock - (dead address) Kyle Harris <kharris@nexus-tech.net>
|
Orphan arm pxa - - - lubbock - (dead address) Kyle Harris <kharris@nexus-tech.net>
|
||||||
Orphan powerpc 74xx_7xx - - evb64260 EVB64260 EVB64260 -
|
Orphan powerpc 74xx_7xx - - evb64260 EVB64260 EVB64260 -
|
||||||
Orphan powerpc 74xx_7xx - - evb64260 EVB64260_750CX EVB64260 Eran Man <eran@nbase.co.il>
|
Orphan powerpc 74xx_7xx - - evb64260 EVB64260_750CX EVB64260 Eran Man <eran@nbase.co.il>
|
||||||
|
|
|
||||||
|
|
@ -11,7 +11,8 @@ easily if here is something they might want to dig for...
|
||||||
|
|
||||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||||
=================================================================================================
|
=================================================================================================
|
||||||
CANBT powerpc 405CR - - Matthias Fuchs <matthias.fuchs@esd.eu>
|
omap1510inn arm arm925t - - Kshitij Gupta <kshitij@ti.com>
|
||||||
|
CANBT powerpc 405CR fb8f4fd 2013-08-07 Matthias Fuchs <matthias.fuchs@esd.eu>
|
||||||
Alaska8220 powerpc mpc8220 d6ed322 2013-05-11
|
Alaska8220 powerpc mpc8220 d6ed322 2013-05-11
|
||||||
Yukon8220 powerpc mpc8220 d6ed322 2013-05-11
|
Yukon8220 powerpc mpc8220 d6ed322 2013-05-11
|
||||||
sorcery powerpc mpc8220 d6ed322 2013-05-11
|
sorcery powerpc mpc8220 d6ed322 2013-05-11
|
||||||
|
|
|
||||||
|
|
@ -1,11 +0,0 @@
|
||||||
/************************************************
|
|
||||||
* NAME : arm925t.h
|
|
||||||
* Version : 23 June 2003 *
|
|
||||||
************************************************/
|
|
||||||
|
|
||||||
#ifndef __ARM925T_H__
|
|
||||||
#define __ARM925T_H__
|
|
||||||
|
|
||||||
void archflashwp(void *archdata, int wp);
|
|
||||||
|
|
||||||
#endif /*__ARM925T_H__*/
|
|
||||||
|
|
@ -1,166 +0,0 @@
|
||||||
/*
|
|
||||||
* (C) Copyright 2003
|
|
||||||
* Texas Instruments.
|
|
||||||
* Kshitij Gupta <kshitij@ti.com>
|
|
||||||
* Configuation settings for the TI OMAP Innovator board.
|
|
||||||
*
|
|
||||||
* SPDX-License-Identifier: GPL-2.0+
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef __CONFIG_H
|
|
||||||
#define __CONFIG_H
|
|
||||||
|
|
||||||
/*
|
|
||||||
* High Level Configuration Options
|
|
||||||
* (easy to change)
|
|
||||||
*/
|
|
||||||
#define CONFIG_ARM925T 1 /* This is an arm925t CPU */
|
|
||||||
#define CONFIG_OMAP 1 /* in a TI OMAP core */
|
|
||||||
#define CONFIG_OMAP1510 1 /* which is in a 1510 (helen) */
|
|
||||||
#define CONFIG_INNOVATOROMAP1510 1 /* a Innovator Board */
|
|
||||||
|
|
||||||
/* input clock of PLL */
|
|
||||||
#define CONFIG_SYS_CLK_FREQ 12000000 /* the OMAP1510 Innovator has 12MHz input clock */
|
|
||||||
|
|
||||||
#define CONFIG_MISC_INIT_R
|
|
||||||
|
|
||||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
||||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
||||||
#define CONFIG_INITRD_TAG 1
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Size of malloc() pool
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Hardware drivers
|
|
||||||
*/
|
|
||||||
/*
|
|
||||||
#define CONFIG_DRIVER_SMC9196
|
|
||||||
#define CONFIG_SMC9196_BASE 0x08000300
|
|
||||||
#define CONFIG_SMC9196_EXT_PHY
|
|
||||||
*/
|
|
||||||
#define CONFIG_LAN91C96
|
|
||||||
#define CONFIG_LAN91C96_BASE 0x08000300
|
|
||||||
#define CONFIG_LAN91C96_EXT_PHY
|
|
||||||
|
|
||||||
/*
|
|
||||||
* NS16550 Configuration
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_NS16550
|
|
||||||
#define CONFIG_SYS_NS16550_SERIAL
|
|
||||||
#define CONFIG_SYS_NS16550_REG_SIZE (-4)
|
|
||||||
#define CONFIG_SYS_NS16550_CLK (CONFIG_SYS_CLK_FREQ) /* can be 12M/32Khz or 48Mhz */
|
|
||||||
#define CONFIG_SYS_NS16550_COM1 0xfffb0000 /* uart1, bluetooth uart on helen */
|
|
||||||
|
|
||||||
/*
|
|
||||||
* select serial console configuration
|
|
||||||
*/
|
|
||||||
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on OMAP1510 Innovator */
|
|
||||||
|
|
||||||
/* allow to overwrite serial and ethaddr */
|
|
||||||
#define CONFIG_ENV_OVERWRITE
|
|
||||||
|
|
||||||
#define CONFIG_ENV_OVERWRITE
|
|
||||||
#define CONFIG_CONS_INDEX 1
|
|
||||||
#define CONFIG_BAUDRATE 115200
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Command line configuration.
|
|
||||||
*/
|
|
||||||
#include <config_cmd_default.h>
|
|
||||||
|
|
||||||
#define CONFIG_CMD_DHCP
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
|
||||||
* BOOTP options
|
|
||||||
*/
|
|
||||||
#define CONFIG_BOOTP_SUBNETMASK
|
|
||||||
#define CONFIG_BOOTP_GATEWAY
|
|
||||||
#define CONFIG_BOOTP_HOSTNAME
|
|
||||||
#define CONFIG_BOOTP_BOOTPATH
|
|
||||||
|
|
||||||
|
|
||||||
#include <configs/omap1510.h>
|
|
||||||
|
|
||||||
#define CONFIG_BOOTDELAY 3
|
|
||||||
#define CONFIG_BOOTARGS "console=ttyS0,115200n8 noinitrd root=/dev/nfs ip=bootp"
|
|
||||||
#define CONFIG_BOOTCOMMAND "bootp;tftp;bootm"
|
|
||||||
#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
|
|
||||||
|
|
||||||
#if defined(CONFIG_CMD_KGDB)
|
|
||||||
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
||||||
/* what's this ? it's not used anywhere */
|
|
||||||
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Miscellaneous configurable options
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
||||||
#define CONFIG_SYS_PROMPT "OMAP1510 Innovator # " /* Monitor Command Prompt */
|
|
||||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
||||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
||||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
||||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_MEMTEST_START 0x10000000 /* memtest works on */
|
|
||||||
#define CONFIG_SYS_MEMTEST_END 0x12000000 /* 32 MB in DRAM */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_LOAD_ADDR 0x10000000 /* default load address */
|
|
||||||
|
|
||||||
/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
|
|
||||||
* This time is further subdivided by a local divisor.
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_TIMERBASE OMAP1510_TIMER1_BASE /* use timer 1 */
|
|
||||||
#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
|
|
||||||
#define CONFIG_SYS_HZ 1000
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* Physical Memory Map
|
|
||||||
*/
|
|
||||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
||||||
#define PHYS_SDRAM_1 0x10000000 /* SDRAM Bank #1 */
|
|
||||||
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
|
|
||||||
|
|
||||||
#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
|
|
||||||
|
|
||||||
#define PHYS_SRAM 0x20000000
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FLASH and environment organization
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
|
||||||
#define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
|
|
||||||
#define PHYS_FLASH_SECT_SIZE (128*1024) /* Size of a sector (128kB) */
|
|
||||||
#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
|
|
||||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE)
|
|
||||||
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* Monitor at beginning of flash */
|
|
||||||
#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE /* Reserve 1 sector */
|
|
||||||
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SIZE }
|
|
||||||
|
|
||||||
/*-----------------------------------------------------------------------
|
|
||||||
* FLASH driver setup
|
|
||||||
*/
|
|
||||||
#define CONFIG_SYS_FLASH_CFI 1 /* Flash memory is CFI compliant */
|
|
||||||
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/mtd/cfi_flash.c */
|
|
||||||
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* Use buffered writes (~10x faster) */
|
|
||||||
#define CONFIG_SYS_FLASH_PROTECTION 1 /* Use hardware sector protection */
|
|
||||||
|
|
||||||
/* timeout values are in ticks */
|
|
||||||
#define CONFIG_SYS_FLASH_ERASE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
|
|
||||||
#define CONFIG_SYS_FLASH_WRITE_TOUT (20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
|
|
||||||
|
|
||||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
||||||
#define CONFIG_ENV_SECT_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
|
|
||||||
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
|
|
||||||
#define CONFIG_ENV_OFFSET ( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
|
|
||||||
|
|
||||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
||||||
#define CONFIG_SYS_INIT_SP_ADDR PHYS_SRAM
|
|
||||||
|
|
||||||
#endif /* __CONFIG_H */
|
|
||||||
Loading…
Reference in New Issue