LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

imx8mq: synchronise device tree with linux 

Synchronise device tree with linux v5.19-rc5.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This commit is contained in:
Marcel Ziswiler 2022-07-21 15:47:59 +02:00 committed by Stefano Babic
parent e6ad8070a7
commit 181d1684ca
10 changed files with 449 additions and 153 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
arch/arm/dts/imx8mq-evk.dts
View File

@ -27,6 +27,17 @@
clock-frequency = <100000000>;
};
reg_pcie1: regulator-pcie {
compatible = "regulator-fixed";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie1_reg>;
regulator-name = "MPCIE_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
@ -123,6 +134,7 @@
&ddrc {
operating-points-v2 = <&ddrc_opp_table>;
status = "okay";
ddrc_opp_table: opp-table {
compatible = "operating-points-v2";
@ -169,6 +181,11 @@
reg = <0>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
qca,disable-smarteee;
vddio-supply = <&vddh>;
vddh: vddh-regulator {
};
};
};
};
@ -318,6 +335,21 @@
<&clk IMX8MQ_CLK_PCIE1_PHY>,
<&pcie0_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
vph-supply = <&vgen5_reg>;
status = "okay";
};
&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie1>;
reset-gpio = <&gpio5 12 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
<&clk IMX8MQ_CLK_PCIE2_AUX>,
<&clk IMX8MQ_CLK_PCIE2_PHY>,
<&pcie0_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
vpcie-supply = <&reg_pcie1>;
vph-supply = <&vgen5_reg>;
status = "okay";
};
@ -325,6 +357,10 @@
power-supply = <&sw1a_reg>;
};
&pgc_vpu {
power-supply = <&sw1c_reg>;
};
&qspi0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi>;
@ -336,6 +372,8 @@
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
spi-tx-bus-width = <1>;
spi-rx-bus-width = <4>;
};
};
@ -402,9 +440,9 @@
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <&reg_usdhc2_vmmc>;
status = "okay";
@ -422,7 +460,6 @@
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19
>;
};
pinctrl_fec1: fec1grp {
@ -471,6 +508,19 @@
>;
};
pinctrl_pcie1: pcie1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C4_SDA_PCIE2_CLKREQ_B 0x76
MX8MQ_IOMUXC_ECSPI2_MISO_GPIO5_IO12 0x16
>;
};
pinctrl_pcie1_reg: pcie1reggrp {
fsl,pins = <
MX8MQ_IOMUXC_ECSPI2_SCLK_GPIO5_IO10 0x16
>;
};
pinctrl_qspi: qspigrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x82
@ -479,7 +529,6 @@
MX8MQ_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82
MX8MQ_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82
MX8MQ_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82
>;
};
@ -564,6 +613,12 @@
>;
};
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83

3
arch/arm/dts/imx8mq-kontron-pitx-imx8m.dts
View File

@ -51,6 +51,7 @@
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
off-on-delay-us = <20000>;
enable-active-high;
};
};
@ -310,7 +311,7 @@
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart3>;
fsl,uart-has-rtscts;
uart-has-rtscts;
assigned-clocks = <&clk IMX8MQ_CLK_UART3>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>;
status = "okay";

144
arch/arm/dts/imx8mq-mnt-reform2.dts
View File

@ -12,6 +12,31 @@
/ {
model = "MNT Reform 2";
compatible = "mntre,reform2", "boundary,imx8mq-nitrogen8m-som", "fsl,imx8mq";
chassis-type = "laptop";
backlight: backlight {
compatible = "pwm-backlight";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
pwms = <&pwm2 0 10000 0>;
power-supply = <&reg_main_usb>;
enable-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
brightness-levels = <0 32 64 128 160 200 255>;
default-brightness-level = <6>;
};
panel {
compatible = "innolux,n125hce-gn1", "simple-panel";
power-supply = <&reg_main_3v3>;
backlight = <&backlight>;
no-hpd;
port {
panel_in: endpoint {
remote-endpoint = <&edp_bridge_out>;
};
};
};
pcie1_refclk: clock-pcie1-refclk {
compatible = "fixed-clock";
@ -41,6 +66,22 @@
vin-supply = <&reg_main_5v>;
};
reg_main_1v8: regulator-main-1v8 {
compatible = "regulator-fixed";
regulator-name = "1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&reg_main_3v3>;
};
reg_main_1v2: regulator-main-1v2 {
compatible = "regulator-fixed";
regulator-name = "1V2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
vin-supply = <&reg_main_5v>;
};
sound {
compatible = "fsl,imx-audio-wm8960";
audio-cpu = <&sai2>;
@ -60,6 +101,13 @@
};
};
&dphy {
assigned-clocks = <&clk IMX8MQ_CLK_DSI_PHY_REF>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
assigned-clock-rates = <25000000>;
status = "okay";
};
&fec1 {
status = "okay";
};
@ -83,6 +131,67 @@
};
};
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
clock-frequency = <400000>;
status = "okay";
edp_bridge: bridge@2c {
compatible = "ti,sn65dsi86";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edp_bridge>;
reg = <0x2c>;
enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
vccio-supply = <&reg_main_1v8>;
vpll-supply = <&reg_main_1v8>;
vcca-supply = <&reg_main_1v2>;
vcc-supply = <&reg_main_1v2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
edp_bridge_in: endpoint {
remote-endpoint = <&mipi_dsi_out>;
};
};
port@1 {
reg = <1>;
edp_bridge_out: endpoint {
remote-endpoint = <&panel_in>;
};
};
};
};
};
&lcdif {
assigned-clocks = <&clk IMX8MQ_CLK_LCDIF_PIXEL>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>;
/delete-property/assigned-clock-rates;
status = "okay";
};
&mipi_dsi {
status = "okay";
ports {
port@1 {
reg = <1>;
mipi_dsi_out: endpoint {
remote-endpoint = <&edp_bridge_in>;
};
};
};
};
&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie1>;
@ -95,6 +204,12 @@
status = "okay";
};
&pwm2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm2>;
status = "okay";
};
&reg_1p8v {
vin-supply = <&reg_main_5v>;
};
@ -168,10 +283,29 @@
};
&iomuxc {
pinctrl_backlight: backlightgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x3
>;
};
pinctrl_edp_bridge: edpbridgegrp {
fsl,pins = <
MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x40000022
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x40000022
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x40000022
MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x40000022
>;
};
@ -181,6 +315,12 @@
>;
};
pinctrl_pwm2: pwm2grp {
fsl,pins = <
MX8MQ_IOMUXC_SPDIF_RX_PWM2_OUT 0x3
>;
};
pinctrl_sai2: sai2grp {
fsl,pins = <
MX8MQ_IOMUXC_SAI2_RXD0_SAI2_RX_DATA0 0xd6

15
arch/arm/dts/imx8mq-nitrogen-som.dtsi
View File

@ -69,6 +69,9 @@
reg = <4>;
interrupt-parent = <&gpio1>;
interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <300>;
};
};
};
@ -191,20 +194,20 @@
MX8MQ_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f
MX8MQ_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0xd1
MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MQ_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x59
MX8MQ_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0xd1
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x1
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x41
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x40000022
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x40000022
>;
};

86
arch/arm/dts/imx8mq-phanbell.dts
View File

@ -1,11 +1,12 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright 2020 NXP
* Copyright 2017-2019 NXP
*/
/dts-v1/;
#include "imx8mq.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "Google i.MX8MQ Phanbell";
@ -35,6 +36,16 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
fan: gpio-fan {
compatible = "gpio-fan";
gpio-fan,speed-map = <0 0 8600 1>;
gpios = <&gpio3 5 GPIO_ACTIVE_HIGH>;
#cooling-cells = <2>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_fan>;
status = "okay";
};
};
&A53_0 {
@ -53,6 +64,53 @@
cpu-supply = <&buck2>;
};
&cpu_thermal {
trips {
cpu_alert0: trip0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
cpu_alert1: trip1 {
temperature = <80000>;
hysteresis = <2000>;
type = "passive";
};
cpu_crit0: trip3 {
temperature = <90000>;
hysteresis = <2000>;
type = "critical";
};
fan_toggle0: trip4 {
temperature = <65000>;
hysteresis = <10000>;
type = "active";
};
};
cooling-maps {
map0 {
trip = <&cpu_alert0>;
cooling-device =
<&A53_0 0 1>; /* Exclude highest OPP */
};
map1 {
trip = <&cpu_alert1>;
cooling-device =
<&A53_0 0 2>; /* Exclude two highest OPPs */
};
map4 {
trip = <&fan_toggle0>;
cooling-device = <&fan 0 1>;
};
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
@ -68,7 +126,7 @@
clocks = <&pmic_osc>;
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
interrupts = <3 GPIO_ACTIVE_LOW>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
buck1: BUCK1 {
@ -206,9 +264,6 @@
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
phy-reset-duration = <10>;
phy-reset-post-delay = <50>;
fsl,magic-packet;
status = "okay";
@ -218,6 +273,9 @@
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
reset-assert-us = <10000>;
reset-deassert-us = <50000>;
};
};
};
@ -295,6 +353,12 @@
>;
};
pinctrl_gpio_fan: gpiofangrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_CLE_GPIO3_IO5 0x16
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
@ -302,7 +366,7 @@
>;
};
pinctrl_pmic: pmicirq {
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
@ -332,7 +396,7 @@
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
@ -349,7 +413,7 @@
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
@ -366,7 +430,7 @@
>;
};
pinctrl_usdhc2_gpio: usdhc2grpgpio {
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
@ -385,7 +449,7 @@
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
@ -397,7 +461,7 @@
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7

2
arch/arm/dts/imx8mq-pico-pi-u-boot.dtsi
View File

@ -1,5 +1,7 @@
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
#include "imx8mq-u-boot.dtsi"
&pinctrl_uart1 {
u-boot,dm-spl;
};

41
arch/arm/dts/imx8mq-pico-pi.dts
View File

@ -9,7 +9,7 @@
/dts-v1/;
#include "imx8mq.dtsi"
#include "imx8mq-u-boot.dtsi"
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "TechNexion PICO-PI-8M";
@ -35,25 +35,13 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 14 GPIO_ACTIVE_LOW>;
};
reg_eth_phy: eth_phy {
compatible = "regulator-fixed";
regulator-name = "eth_phy_pwr";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
pinctrl-0 = <&pinctrl_fec1 &pinctrl_enet_3v3>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
phy-supply = <&reg_eth_phy>;
phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
phy-reset-duration = <100>;
phy-reset-post-delay = <100>;
fsl,magic-packet;
status = "okay";
@ -83,7 +71,7 @@
clock-names = "osc";
clock-output-names = "pmic_clk";
interrupt-parent = <&gpio1>;
interrupts = <3 GPIO_ACTIVE_LOW>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "irq";
regulators {
@ -220,6 +208,8 @@
};
&usdhc1 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
assigned-clock-rates = <400000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
@ -230,6 +220,8 @@
};
&usdhc2 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
@ -260,6 +252,12 @@
};
&iomuxc {
pinctrl_enet_3v3: enet3v3grp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
@ -276,7 +274,6 @@
MX8MQ_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
MX8MQ_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x19
MX8MQ_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19
>;
};
@ -301,7 +298,7 @@
>;
};
pinctrl_pmic: pmicirq {
pinctrl_pmic: pmicirqgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x41
>;
@ -339,7 +336,7 @@
>;
};
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x85
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc5
@ -355,7 +352,7 @@
>;
};
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x87
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc7
@ -371,7 +368,7 @@
>;
};
pinctrl_usdhc2_gpio: usdhc2grpgpio {
pinctrl_usdhc2_gpio: usdhc2gpiogrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x41
>;
@ -389,7 +386,7 @@
>;
};
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
@ -401,7 +398,7 @@
>;
};
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7

198
arch/arm/dts/imx8mq.dtsi
View File

@ -63,6 +63,13 @@
clock-output-names = "osc_27m";
};
hdmi_phy_27m: clock-hdmi-phy-27m {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <27000000>;
clock-output-names = "hdmi_phy_27m";
};
clk_ext1: clock-ext1 {
compatible = "fixed-clock";
#clock-cells = <0>;
@ -102,6 +109,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -116,6 +129,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -128,6 +147,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -140,6 +165,12 @@
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clk IMX8MQ_CLK_ARM>;
enable-method = "psci";
i-cache-size = <0x8000>;
i-cache-line-size = <64>;
i-cache-sets = <256>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
next-level-cache = <&A53_L2>;
operating-points-v2 = <&a53_opp_table>;
#cooling-cells = <2>;
@ -147,6 +178,10 @@
A53_L2: l2-cache0 {
compatible = "cache";
cache-level = <2>;
cache-size = <0x100000>;
cache-line-size = <64>;
cache-sets = <1024>;
};
};
@ -429,49 +464,49 @@
clocks = <&clk IMX8MQ_CLK_TMU_ROOT>;
little-endian;
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
fsl,tmu-calibration = <0x00000000 0x00000023
0x00000001 0x00000029
0x00000002 0x0000002f
0x00000003 0x00000035
0x00000004 0x0000003d
0x00000005 0x00000043
0x00000006 0x0000004b
0x00000007 0x00000051
0x00000008 0x00000057
0x00000009 0x0000005f
0x0000000a 0x00000067
0x0000000b 0x0000006f
fsl,tmu-calibration = <0x00000000 0x00000023>,
<0x00000001 0x00000029>,
<0x00000002 0x0000002f>,
<0x00000003 0x00000035>,
<0x00000004 0x0000003d>,
<0x00000005 0x00000043>,
<0x00000006 0x0000004b>,
<0x00000007 0x00000051>,
<0x00000008 0x00000057>,
<0x00000009 0x0000005f>,
<0x0000000a 0x00000067>,
<0x0000000b 0x0000006f>,
0x00010000 0x0000001b
0x00010001 0x00000023
0x00010002 0x0000002b
0x00010003 0x00000033
0x00010004 0x0000003b
0x00010005 0x00000043
0x00010006 0x0000004b
0x00010007 0x00000055
0x00010008 0x0000005d
0x00010009 0x00000067
0x0001000a 0x00000070
<0x00010000 0x0000001b>,
<0x00010001 0x00000023>,
<0x00010002 0x0000002b>,
<0x00010003 0x00000033>,
<0x00010004 0x0000003b>,
<0x00010005 0x00000043>,
<0x00010006 0x0000004b>,
<0x00010007 0x00000055>,
<0x00010008 0x0000005d>,
<0x00010009 0x00000067>,
<0x0001000a 0x00000070>,
0x00020000 0x00000017
0x00020001 0x00000023
0x00020002 0x0000002d
0x00020003 0x00000037
0x00020004 0x00000041
0x00020005 0x0000004b
0x00020006 0x00000057
0x00020007 0x00000063
0x00020008 0x0000006f
<0x00020000 0x00000017>,
<0x00020001 0x00000023>,
<0x00020002 0x0000002d>,
<0x00020003 0x00000037>,
<0x00020004 0x00000041>,
<0x00020005 0x0000004b>,
<0x00020006 0x00000057>,
<0x00020007 0x00000063>,
<0x00020008 0x0000006f>,
0x00030000 0x00000015
0x00030001 0x00000021
0x00030002 0x0000002d
0x00030003 0x00000039
0x00030004 0x00000045
0x00030005 0x00000053
0x00030006 0x0000005f
0x00030007 0x00000071>;
<0x00030000 0x00000015>,
<0x00030001 0x00000021>,
<0x00030002 0x0000002d>,
<0x00030003 0x00000039>,
<0x00030004 0x00000045>,
<0x00030005 0x00000053>,
<0x00030006 0x0000005f>,
<0x00030007 0x00000071>;
#thermal-sensor-cells = <1>;
};
@ -526,7 +561,7 @@
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
status = "disabled";
port@0 {
port {
lcdif_mipi_dsi: endpoint {
remote-endpoint = <&mipi_dsi_lcdif_in>;
};
@ -709,7 +744,21 @@
pgc_vpu: power-domain@6 {
#power-domain-cells = <0>;
reg = <IMX8M_POWER_DOMAIN_VPU>;
clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
clocks = <&clk IMX8MQ_CLK_VPU_DEC_ROOT>,
<&clk IMX8MQ_CLK_VPU_G1_ROOT>,
<&clk IMX8MQ_CLK_VPU_G2_ROOT>;
assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
<&clk IMX8MQ_CLK_VPU_G2>,
<&clk IMX8MQ_CLK_VPU_BUS>,
<&clk IMX8MQ_VPU_PLL_BYPASS>;
assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
<&clk IMX8MQ_VPU_PLL_OUT>,
<&clk IMX8MQ_SYS1_PLL_800M>,
<&clk IMX8MQ_VPU_PLL>;
assigned-clock-rates = <600000000>,
<600000000>,
<800000000>,
<0>;
};
pgc_disp: power-domain@7 {
@ -749,7 +798,7 @@
clocks = <&clk IMX8MQ_CLK_PWM1_ROOT>,
<&clk IMX8MQ_CLK_PWM1_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -760,7 +809,7 @@
clocks = <&clk IMX8MQ_CLK_PWM2_ROOT>,
<&clk IMX8MQ_CLK_PWM2_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -771,7 +820,7 @@
clocks = <&clk IMX8MQ_CLK_PWM3_ROOT>,
<&clk IMX8MQ_CLK_PWM3_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -782,7 +831,7 @@
clocks = <&clk IMX8MQ_CLK_PWM4_ROOT>,
<&clk IMX8MQ_CLK_PWM4_ROOT>;
clock-names = "ipg", "per";
#pwm-cells = <2>;
#pwm-cells = <3>;
status = "disabled";
};
@ -1123,8 +1172,8 @@
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
port@1 {
reg = <1>;
csi1_mipi_ep: endpoint {
remote-endpoint = <&csi1_ep>;
@ -1175,8 +1224,8 @@
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
port@1 {
reg = <1>;
csi2_mipi_ep: endpoint {
remote-endpoint = <&csi2_ep>;
@ -1290,7 +1339,6 @@
fsl,num-rx-queues = <3>;
nvmem-cells = <&fec_mac_address>;
nvmem-cell-names = "mac-address";
nvmem_macaddr_swap;
fsl,stop-mode = <&iomuxc_gpr 0x10 3>;
status = "disabled";
};
@ -1430,30 +1478,31 @@
status = "disabled";
};
vpu: video-codec@38300000 {
compatible = "nxp,imx8mq-vpu";
reg = <0x38300000 0x10000>,
<0x38310000 0x10000>,
<0x38320000 0x10000>;
reg-names = "g1", "g2", "ctrl";
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "g1", "g2";
vpu_g1: video-codec@38300000 {
compatible = "nxp,imx8mq-vpu-g1";
reg = <0x38300000 0x10000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>;
power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G1>;
};
vpu_g2: video-codec@38310000 {
compatible = "nxp,imx8mq-vpu-g2";
reg = <0x38310000 0x10000>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_VPU_G2_ROOT>;
power-domains = <&vpu_blk_ctrl IMX8MQ_VPUBLK_PD_G2>;
};
vpu_blk_ctrl: blk-ctrl@38320000 {
compatible = "fsl,imx8mq-vpu-blk-ctrl";
reg = <0x38320000 0x100>;
power-domains = <&pgc_vpu>, <&pgc_vpu>, <&pgc_vpu>;
power-domain-names = "bus", "g1", "g2";
clocks = <&clk IMX8MQ_CLK_VPU_G1_ROOT>,
<&clk IMX8MQ_CLK_VPU_G2_ROOT>,
<&clk IMX8MQ_CLK_VPU_DEC_ROOT>;
clock-names = "g1", "g2", "bus";
assigned-clocks = <&clk IMX8MQ_CLK_VPU_G1>,
<&clk IMX8MQ_CLK_VPU_G2>,
<&clk IMX8MQ_CLK_VPU_BUS>,
<&clk IMX8MQ_VPU_PLL_BYPASS>;
assigned-clock-parents = <&clk IMX8MQ_VPU_PLL_OUT>,
<&clk IMX8MQ_VPU_PLL_OUT>,
<&clk IMX8MQ_SYS1_PLL_800M>,
<&clk IMX8MQ_VPU_PLL>;
assigned-clock-rates = <600000000>, <600000000>,
<800000000>, <0>;
power-domains = <&pgc_vpu>;
<&clk IMX8MQ_CLK_VPU_G2_ROOT>;
clock-names = "g1", "g2";
#power-domain-cells = <1>;
};
pcie0: pcie@33800000 {
@ -1552,6 +1601,7 @@
<&clk IMX8MQ_DRAM_PLL_OUT>,
<&clk IMX8MQ_CLK_DRAM_ALT>,
<&clk IMX8MQ_CLK_DRAM_APB>;
status = "disabled";
};
ddr-pmu@3d800000 {

19
include/dt-bindings/clock/imx8mq-clock.h
View File

@ -405,25 +405,6 @@
#define IMX8MQ_VIDEO2_PLL1_REF_SEL 266
#define IMX8MQ_SYS1_PLL_40M_CG 267
#define IMX8MQ_SYS1_PLL_80M_CG 268
#define IMX8MQ_SYS1_PLL_100M_CG 269
#define IMX8MQ_SYS1_PLL_133M_CG 270
#define IMX8MQ_SYS1_PLL_160M_CG 271
#define IMX8MQ_SYS1_PLL_200M_CG 272
#define IMX8MQ_SYS1_PLL_266M_CG 273
#define IMX8MQ_SYS1_PLL_400M_CG 274
#define IMX8MQ_SYS1_PLL_800M_CG 275
#define IMX8MQ_SYS2_PLL_50M_CG 276
#define IMX8MQ_SYS2_PLL_100M_CG 277
#define IMX8MQ_SYS2_PLL_125M_CG 278
#define IMX8MQ_SYS2_PLL_166M_CG 279
#define IMX8MQ_SYS2_PLL_200M_CG 280
#define IMX8MQ_SYS2_PLL_250M_CG 281
#define IMX8MQ_SYS2_PLL_333M_CG 282
#define IMX8MQ_SYS2_PLL_500M_CG 283
#define IMX8MQ_SYS2_PLL_1000M_CG 284
#define IMX8MQ_CLK_GPU_CORE 285
#define IMX8MQ_CLK_GPU_SHADER 286
#define IMX8MQ_CLK_M4_CORE 287

3
include/dt-bindings/power/imx8mq-power.h
View File

@ -18,4 +18,7 @@
#define IMX8M_POWER_DOMAIN_MIPI_CSI2 9
#define IMX8M_POWER_DOMAIN_PCIE2 10
#define IMX8MQ_VPUBLK_PD_G1 0
#define IMX8MQ_VPUBLK_PD_G2 1
#endif