LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

mpc8xxx_spi: put max_cs to use 

Currently, max_cs is write-only; it's just set in
mpc8xxx_spi_ofdata_to_platdata and not otherwise used.

My mpc8309 was always resetting during an "sf probe 0". It turns out
dm_gpio_set_dir_flags() was being called with garbage, since nothing
had initialized priv->gpios[0] - our device tree used "cs-gpios"
rather than "gpios", so gpio_request_list_by_name() had returned 0.

That would have been a lot easier to figure out if the chip select
index was sanity checked, so rename max_cs to cs_count, and reject a
xfer with a too large cs index.

Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
This commit is contained in:
Rasmus Villemoes 2020-02-11 15:20:24 +00:00 committed by Tom Rini
parent 96e68c1621
commit 1a7b462dee
1 changed files with 7 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
drivers/spi/mpc8xxx_spi.c
View File

@ -35,7 +35,7 @@ enum {
struct mpc8xxx_priv {
spi8xxx_t *spi;
struct gpio_desc gpios[16];
int max_cs;
int cs_count;
};
static inline u32 to_prescale_mod(u32 val)
@ -74,7 +74,7 @@ static int mpc8xxx_spi_ofdata_to_platdata(struct udevice *dev)
if (ret < 0)
return -EINVAL;
priv->max_cs = ret;
priv->cs_count = ret;
return 0;
}
@ -131,6 +131,11 @@ static int mpc8xxx_spi_xfer(struct udevice *dev, uint bitlen,
debug("%s: slave %s:%u dout %08X din %08X bitlen %u\n", __func__,
bus->name, platdata->cs, *(uint *)dout, *(uint *)din, bitlen);
if (platdata->cs >= priv->cs_count) {
dev_err(dev, "chip select index %d too large (cs_count=%d)\n",
platdata->cs, priv->cs_count);
return -EINVAL;
}
if (flags & SPI_XFER_BEGIN)
mpc8xxx_spi_cs_activate(dev);