LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

ppc4xx: Update PMC405 board support 

This patch prepares the good old PMC405 board support for
upcoming PMC405V2 patches.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
Signed-off-by: Stefan Roese <sr@denx.de>
This commit is contained in:
Matthias Fuchs 2009-02-15 22:27:47 +01:00 committed by Stefan Roese
parent c553b5f4a0
commit 2f6eb9170b
3 changed files with 40 additions and 42 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
board/esd/pmc405/config.mk
View File

@ -21,8 +21,4 @@
# MA 02111-1307 USA # MA 02111-1307 USA
# #
# TEXT_BASE = 0xFFF80000
# esd PMC405 boards
#
TEXT_BASE = 0xFFFC0000

18
board/esd/pmc405/pmc405.c
View File

@ -2,7 +2,7 @@
* (C) Copyright 2001-2003 * (C) Copyright 2001-2003
* Stefan Roese, DENX Software Engineering, sr@denx.de. * Stefan Roese, DENX Software Engineering, sr@denx.de.
* *
* (C) Copyright 2005 * (C) Copyright 2005-2009
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
* *
* See file CREDITS for list of people who contributed to this * See file CREDITS for list of people who contributed to this
@ -26,6 +26,7 @@
#include <common.h> #include <common.h>
#include <asm/processor.h> #include <asm/processor.h>
#include <asm/io.h>
#include <command.h> #include <command.h>
#include <malloc.h> #include <malloc.h>
@ -77,16 +78,16 @@ int board_early_init_f (void)
CONFIG_SYS_NONMONARCH | \ CONFIG_SYS_NONMONARCH | \
CONFIG_SYS_REV1_2) << 5)); CONFIG_SYS_REV1_2) << 5));
if (!(in32(GPIO0_IR) & CONFIG_SYS_REV1_2)) { if (!(in_be32((void*)GPIO0_IR) & CONFIG_SYS_REV1_2)) {
/* rev 1.2 boards */ /* rev 1.2 boards */
mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | \ mtdcr(cntrl0, mfdcr(cntrl0) | ((CONFIG_SYS_INTA_FAKE | \
CONFIG_SYS_SELF_RST) << 5)); CONFIG_SYS_SELF_RST) << 5));
} }
out32(GPIO0_OR, 0); out_be32((void*)GPIO0_OR, CONFIG_SYS_VPEN);
/* setup for output */ /* setup for output */
out32(GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | \ out_be32((void*)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | \
CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY); CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN);
/* /*
* - check if rev1_2 is low, then: * - check if rev1_2 is low, then:
@ -103,14 +104,15 @@ int misc_init_r (void)
gd->bd->bi_flashoffset = 0; gd->bd->bi_flashoffset = 0;
/* deassert EREADY# */ /* deassert EREADY# */
out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_XEREADY); out_be32((void*)GPIO0_OR,
in_be32((void*)GPIO0_OR) | CONFIG_SYS_XEREADY);
return (0); return (0);
} }
ushort pmc405_pci_subsys_deviceid(void) ushort pmc405_pci_subsys_deviceid(void)
{ {
ulong val; ulong val;
val = in32(GPIO0_IR); val = in_be32((void*)GPIO0_IR);
if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
/* check monarch# signal */ /* check monarch# signal */
if (val & CONFIG_SYS_NONMONARCH) if (val & CONFIG_SYS_NONMONARCH)
@ -137,7 +139,7 @@ int checkboard (void)
else else
puts(str); puts(str);
val = in32(GPIO0_IR); val = in_be32((void*)GPIO0_IR);
if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */
puts(" rev1.2 ("); puts(" rev1.2 (");
if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */ if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */

58
include/configs/PMC405.h
View File

@ -40,11 +40,20 @@
#define CONFIG_BAUDRATE 9600 #define CONFIG_BAUDRATE 9600
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */ #define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
/* Only interrupt boot if space is pressed. */
#define CONFIG_AUTOBOOT_KEYED 1
#define CONFIG_AUTOBOOT_PROMPT \
"Press SPACE to abort autoboot in %d seconds\n", bootdelay
#undef CONFIG_AUTOBOOT_DELAY_STR
#define CONFIG_AUTOBOOT_STOP_STR " "
#undef CONFIG_BOOTARGS #undef CONFIG_BOOTARGS
#undef CONFIG_BOOTCOMMAND #undef CONFIG_BOOTCOMMAND
#define CONFIG_PREBOOT /* enable preboot variable */ #define CONFIG_PREBOOT /* enable preboot variable */
#define CFG_BOOTM_LEN 0x1000000 /* support booting of huge images */
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
@ -106,7 +115,7 @@
#if defined(CONFIG_CMD_KGDB) #if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#else #else
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
#endif #endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
@ -122,18 +131,18 @@
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock */ #undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock */
#define CONFIG_SYS_BASE_BAUD 691200 #define CONFIG_SYS_BASE_BAUD 806400
/* The following table includes the supported baudrates */ /* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE \ #define CONFIG_SYS_BAUDRATE_TABLE \
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
57600, 115200, 230400, 460800, 921600 }
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */ #define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
#define CONFIG_LOOPW 1 /* enable loopw command */ #define CONFIG_LOOPW 1 /* enable loopw command */
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
@ -158,8 +167,6 @@
#define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config */ #define CONFIG_PCI_CONFIG_HOST_BRIDGE 1 /* don't skip host bridge config */
#define CONFIG_PCI_BOOTDELAY 0 /* enable pci bootdelay variable */
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH 0x0408 /* PCI Device ID */
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID */ #define CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH 0x0409 /* PCI Device ID */
@ -180,10 +187,12 @@
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/ */
#define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_MONITOR_BASE 0xFFFC0000 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* 256 kB for Monitor */ #define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* 128 kB for malloc() */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* 128 kB for malloc() */
#define CONFIG_PRAM 0 /* use pram variable to overwrite */
/* /*
* For booting Linux, the board info and command line data * For booting Linux, the board info and command line data
* have to be in the first 8 MB of memory, since this is * have to be in the first 8 MB of memory, since this is
@ -200,6 +209,7 @@
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ #define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ #define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
#define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */ #define CONFIG_SYS_FLASH_PROTECTION 1 /* don't use hardware protection */
#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}}
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (faster) */ #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (faster) */
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */ #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks */
#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \
@ -207,23 +217,6 @@
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ #define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on fli */ #define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on fli */
/*
* JFFS2 partitions - second bank contains u-boot
* No command line, one static partition, whole device
*/
#undef CONFIG_JFFS2_CMDLINE
#define CONFIG_JFFS2_DEV "nor0"
#define CONFIG_JFFS2_PART_SIZE 0x01b00000
#define CONFIG_JFFS2_PART_OFFSET 0x00400000
/*
* mtdparts command line support
* Note: fake mtd_id used, no linux mtd map file
*/
#define CONFIG_JFFS2_CMDLINE
#define MTDIDS_DEFAULT "nor0=pmc405-0"
#define MTDPARTS_DEFAULT "mtdparts=pmc405-0:-(jffs2)"
/* /*
* Environment Variable setup * Environment Variable setup
*/ */
@ -240,14 +233,17 @@
* I2C EEPROM (CAT24WC16) for environment * I2C EEPROM (CAT24WC16) for environment
*/ */
#define CONFIG_HARD_I2C /* I2c with hardware support */ #define CONFIG_HARD_I2C /* I2c with hardware support */
#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ #define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed and slave address */
#define CONFIG_SYS_I2C_SLAVE 0x7F #define CONFIG_SYS_I2C_SLAVE 0x7F
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */ #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT24W16 */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */ #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
/* mask of address bits that overflow into the "EEPROM chip address" */ /* mask of address bits that overflow into the "EEPROM chip address" */
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24W16 has */
/* 16 byte page write mode using*/
/* last 4 bits of the address */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
/* /*
@ -287,7 +283,7 @@
* FPGA stuff * FPGA stuff
*/ */
#define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ #define CONFIG_SYS_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */
#define CONFIG_SYS_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */ #define CONFIG_SYS_FPGA_MAX_SIZE (32 * 1024) /* 32kByte for CPLD */
/* FPGA program pin configuration */ /* FPGA program pin configuration */
#define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (output) */ #define CONFIG_SYS_FPGA_PRG 0x04000000 /* JTAG TMS pin (output) */
@ -302,6 +298,7 @@
/* /*
* GPIOs * GPIOs
*/ */
#define CONFIG_SYS_VPEN (0x80000000 >> 3) /* GPIO3 */
#define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO14 */ #define CONFIG_SYS_NONMONARCH (0x80000000 >> 14) /* GPIO14 */
#define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */ #define CONFIG_SYS_XEREADY (0x80000000 >> 15) /* GPIO15 */
#define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */ #define CONFIG_SYS_INTA_FAKE (0x80000000 >> 19) /* GPIO19 */
@ -339,4 +336,7 @@
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */ #define BOOTFLAG_WARM 0x02 /* Software reboot */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#endif /* __CONFIG_H */ #endif /* __CONFIG_H */