LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Command usage cleanup 

Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
This commit is contained in:
Peter Tyser 2009-01-27 18:03:12 -06:00 committed by Wolfgang Denk
parent 79621bc10b
commit 2fb2604d5c
163 changed files with 361 additions and 352 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
README
View File

@ -2045,6 +2045,9 @@ Configuration Settings:
- CONFIG_SYS_LONGHELP: Defined when you want long help messages included; - CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
undefine this when you're short of memory. undefine this when you're short of memory.
- CONFIG_SYS_HELP_CMD_WIDTH: Defined when you want to override the default
width of the commands listed in the 'help' command output.
- CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to - CONFIG_SYS_PROMPT: This is what U-Boot prints on the console to
prompt for user input. prompt for user input.

2
board/BuS/EB+MCF-EV123/EB+MCF-EV123.c
View File

@ -155,7 +155,7 @@ int do_vcimage (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
vcimage, 2, 0, do_vcimage, vcimage, 2, 0, do_vcimage,
"vcimage - loads an image to Display\n", "loads an image to Display",
"vcimage addr\n" "vcimage addr\n"
); );

2
board/MAI/AmigaOneG3SE/cmd_boota.c
View File

@ -122,7 +122,7 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP) #if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
U_BOOT_CMD( U_BOOT_CMD(
boota, 3, 1, do_boota, boota, 3, 1, do_boota,
"boota - boot an Amiga kernel\n", "boot an Amiga kernel",
"address disk" "address disk"
); );
#endif /* _CMD_BOOTA_H */ #endif /* _CMD_BOOTA_H */

2
board/MAI/menu/cmd_menu.c
View File

@ -10,7 +10,7 @@ int do_menu( cmd_tbl_t *cmdtp, /*bd_t *bd,*/ int flag, int argc, char *argv[] )
#if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP) #if defined(CONFIG_AMIGAONEG3SE) && defined(CONFIG_CMD_BSP)
U_BOOT_CMD( U_BOOT_CMD(
menu, 1, 1, do_menu, menu, 1, 1, do_menu,
"menu - display BIOS setup menu\n", "display BIOS setup menu",
"" ""
); );
#endif #endif

2
board/ads5121/ads5121_diu.c
View File

@ -101,7 +101,7 @@ int ads5121diu_init_show_bmp(cmd_tbl_t *cmdtp,
U_BOOT_CMD( U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp, diufb, CONFIG_SYS_MAXARGS, 1, ads5121diu_init_show_bmp,
"diufb - Init or Display BMP file\n", "Init or Display BMP file",
"init\n - initialize DIU\n" "init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n" "addr\n - display bmp at address 'addr'\n"
); );

2
board/amcc/acadia/cmd_acadia.c
View File

@ -96,6 +96,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
bootstrap, 3, 0, do_bootstrap, bootstrap, 3, 0, do_bootstrap,
"bootstrap - program the I2C bootstrap EEPROM\n", "program the I2C bootstrap EEPROM",
"<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n" "<cpu-freq> <nor|nand> - program the I2C bootstrap EEPROM\n"
); );

2
board/amcc/canyonlands/bootstrap.c
View File

@ -190,6 +190,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap, bootstrap, 2, 0, do_bootstrap,
"bootstrap - program the I2C bootstrap EEPROM\n", "program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n" "<nand|nor> - strap to boot from NAND or NOR flash\n"
); );

2
board/amcc/katmai/cmd_katmai.c
View File

@ -213,6 +213,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
bootstrap, 3, 1, do_bootstrap, bootstrap, 3, 1, do_bootstrap,
"bootstrap - program the serial device strap\n", "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n" "wrclk [prom0|prom1] - program the serial device strap\n"
); );

2
board/amcc/kilauea/cmd_pll.c
View File

@ -237,7 +237,7 @@ ret:
U_BOOT_CMD( U_BOOT_CMD(
pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter, pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
"pllalter- change pll frequence \n", "change pll frequence",
"pllalter <selection> - change pll frequence \n\n\ "pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\ ** New freq take effect after reset. ** \n\
----------------------------------------------\n\ ----------------------------------------------\n\

2
board/amcc/luan/luan.c
View File

@ -329,7 +329,7 @@ int do_l2cache( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[] )
U_BOOT_CMD( U_BOOT_CMD(
l2cache, 2, 1, do_l2cache, l2cache, 2, 1, do_l2cache,
"l2cache - enable or disable L2 cache\n", "enable or disable L2 cache",
"[on, off]\n" "[on, off]\n"
" - enable or disable L2 cache\n" " - enable or disable L2 cache\n"
); );

2
board/amcc/makalu/cmd_pll.c
View File

@ -237,7 +237,7 @@ ret:
U_BOOT_CMD( U_BOOT_CMD(
pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter, pllalter, CONFIG_SYS_MAXARGS, 1, do_pll_alter,
"pllalter- change pll frequence \n", "change pll frequence",
"pllalter <selection> - change pll frequence \n\n\ "pllalter <selection> - change pll frequence \n\n\
** New freq take effect after reset. ** \n\ ** New freq take effect after reset. ** \n\
----------------------------------------------\n\ ----------------------------------------------\n\

2
board/amcc/sequoia/cmd_sequoia.c
View File

@ -226,6 +226,6 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
bootstrap, 2, 0, do_bootstrap, bootstrap, 2, 0, do_bootstrap,
"bootstrap - program the I2C bootstrap EEPROM\n", "program the I2C bootstrap EEPROM",
"<nand|nor> - strap to boot from NAND or NOR flash\n" "<nand|nor> - strap to boot from NAND or NOR flash\n"
); );

8
board/amcc/taihu/lcd.c
View File

@ -232,25 +232,25 @@ static int do_lcd_cur (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
lcd_cls, 1, 1, do_lcd_clear, lcd_cls, 1, 1, do_lcd_clear,
"lcd_cls - lcd clear display\n", "lcd clear display",
NULL NULL
); );
U_BOOT_CMD( U_BOOT_CMD(
lcd_puts, 2, 1, do_lcd_puts, lcd_puts, 2, 1, do_lcd_puts,
"lcd_puts - display string on lcd\n", "display string on lcd",
"<string> - <string> to be displayed\n" "<string> - <string> to be displayed\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
lcd_putc, 2, 1, do_lcd_putc, lcd_putc, 2, 1, do_lcd_putc,
"lcd_putc - display char on lcd\n", "display char on lcd",
"<char> - <char> to be displayed\n" "<char> - <char> to be displayed\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
lcd_cur, 3, 1, do_lcd_cur, lcd_cur, 3, 1, do_lcd_cur,
"lcd_cur - shift cursor on lcd\n", "shift cursor on lcd",
"<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n" "<count> <dir> - shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0..31\n" " <count> - 0..31\n"
" <dir> - 0=backward 1=forward\n" " <dir> - 0=backward 1=forward\n"

4
board/amcc/taihu/taihu.c
View File

@ -93,7 +93,7 @@ static int do_sw_stat(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
U_BOOT_CMD ( U_BOOT_CMD (
sw2_stat, 1, 1, do_sw_stat, sw2_stat, 1, 1, do_sw_stat,
"sw2_stat - show status of switch 2\n", "show status of switch 2",
NULL NULL
); );
@ -132,7 +132,7 @@ static int do_led_ctl(cmd_tbl_t* cmd_tp, int flags, int argc, char *argv[])
U_BOOT_CMD ( U_BOOT_CMD (
led_ctl, 3, 1, do_led_ctl, led_ctl, 3, 1, do_led_ctl,
"led_ctl - make led 1 or 2 on or off\n", "make led 1 or 2 on or off",
"<led_no> <on/off> - make led <led_no> on/off,\n" "<led_no> <on/off> - make led <led_no> on/off,\n"
"\tled_no is 1 or 2\t" "\tled_no is 1 or 2\t"
); );

2
board/amcc/taihu/update.c
View File

@ -127,6 +127,6 @@ static int update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char *argv[]
U_BOOT_CMD ( U_BOOT_CMD (
update_boot_eeprom, 1, 1, update_boot_eeprom, update_boot_eeprom, 1, 1, update_boot_eeprom,
"update_boot_eeprom - update boot eeprom content\n", "update boot eeprom content",
NULL NULL
); );

14
board/amcc/taishan/lcd.c
View File

@ -254,16 +254,16 @@ static int do_lcd_cur(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 0; return 0;
} }
U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd_test - lcd test display\n", NULL); U_BOOT_CMD(lcd_test, 1, 1, do_lcd_test, "lcd test display", NULL);
U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd_cls - lcd clear display\n", NULL); U_BOOT_CMD(lcd_cls, 1, 1, do_lcd_clear, "lcd clear display", NULL);
U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts, U_BOOT_CMD(lcd_puts, 2, 1, do_lcd_puts,
"lcd_puts - display string on lcd\n", "display string on lcd",
"<string> - <string> to be displayed\n"); "<string> - <string> to be displayed\n");
U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc, U_BOOT_CMD(lcd_putc, 2, 1, do_lcd_putc,
"lcd_putc - display char on lcd\n", "display char on lcd",
"<char> - <char> to be displayed\n"); "<char> - <char> to be displayed\n");
U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur, U_BOOT_CMD(lcd_cur, 3, 1, do_lcd_cur,
"lcd_cur - shift cursor on lcd\n", "shift cursor on lcd",
"<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n" "<count> <dir>- shift cursor on lcd <count> times, direction is <dir> \n"
" <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n"); " <count> - 0~31\n" " <dir> - 0,backward; 1, forward\n");
@ -373,8 +373,8 @@ static int do_led_test_on(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(ledon, 1, 1, do_led_test_on, U_BOOT_CMD(ledon, 1, 1, do_led_test_on,
"ledon - led test light on\n", NULL); "led test light on", NULL);
U_BOOT_CMD(ledoff, 1, 1, do_led_test_off, U_BOOT_CMD(ledoff, 1, 1, do_led_test_off,
"ledoff - led test light off\n", NULL); "led test light off", NULL);
#endif #endif

6
board/amcc/taishan/showinfo.c
View File

@ -168,7 +168,7 @@ int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info, U_BOOT_CMD(xbriinfo, 1, 1, do_show_xbridge_info,
"xbriinfo - Show PCIX bridge info\n", NULL); "Show PCIX bridge info", NULL);
#define TAISHAN_PCI_DEV_ID0 0x800 #define TAISHAN_PCI_DEV_ID0 0x800
#define TAISHAN_PCI_DEV_ID1 0x1000 #define TAISHAN_PCI_DEV_ID1 0x1000
@ -222,7 +222,7 @@ int do_show_pcix_device_info(cmd_tbl_t * cmdtp, int flag, int argc,
} }
U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info, U_BOOT_CMD(xdevinfo, 1, 1, do_show_pcix_device_info,
"xdevinfo - Show PCIX Device info\n", NULL); "Show PCIX Device info", NULL);
extern void show_reset_reg(void); extern void show_reset_reg(void);
@ -233,4 +233,4 @@ int do_show_reset_reg_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info, U_BOOT_CMD(resetinfo, 1, 1, do_show_reset_reg_info,
"resetinfo - Show Reset REG info\n", NULL); "Show Reset REG info", NULL);

2
board/amcc/taishan/update.c
View File

@ -74,5 +74,5 @@ int do_update_boot_eeprom(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom, U_BOOT_CMD(update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update_boot_eeprom - update bootstrap eeprom content\n", NULL); "update bootstrap eeprom content", NULL);
#endif #endif

2
board/amcc/yucca/cmd_yucca.c
View File

@ -281,6 +281,6 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
U_BOOT_CMD( U_BOOT_CMD(
evb440spe, 3, 1, do_evb440spe, evb440spe, 3, 1, do_evb440spe,
"evb440spe - program the serial device strap\n", "program the serial device strap",
"wrclk [prom0|prom1] - program the serial device strap\n" "wrclk [prom0|prom1] - program the serial device strap\n"
); );

10
board/amirix/ap1000/ap1000.c
View File

@ -659,7 +659,7 @@ done:
} }
U_BOOT_CMD (temp, 6, 0, do_temp_sensor, U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
"temp - interact with the temperature sensor\n", "interact with the temperature sensor",
"temp [s]\n" "temp [s]\n"
" - Show status.\n" " - Show status.\n"
"temp l LOW [HIGH] [THERM]\n" "temp l LOW [HIGH] [THERM]\n"
@ -674,28 +674,28 @@ U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
#if 0 #if 0
U_BOOT_CMD (loadace, 2, 0, do_loadace, U_BOOT_CMD (loadace, 2, 0, do_loadace,
"loadace - load fpga configuration from System ACE compact flash\n", "load fpga configuration from System ACE compact flash",
"N\n" "N\n"
" - Load configuration N (0-7) from System ACE compact flash\n" " - Load configuration N (0-7) from System ACE compact flash\n"
"loadace\n" " - loads default configuration\n"); "loadace\n" " - loads default configuration\n");
#endif #endif
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte, U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
"swconfig- display or modify the software configuration byte\n", "display or modify the software configuration byte",
"N [ADDRESS]\n" "N [ADDRESS]\n"
" - set software configuration byte to N, optionally use ADDRESS as\n" " - set software configuration byte to N, optionally use ADDRESS as\n"
" location of buffer for flash copy\n" " location of buffer for flash copy\n"
"swconfig\n" " - display software configuration byte\n"); "swconfig\n" " - display software configuration byte\n");
U_BOOT_CMD (pause, 2, 0, do_pause, U_BOOT_CMD (pause, 2, 0, do_pause,
"pause - sleep processor until any key is pressed with poll time of N seconds\n", "sleep processor until any key is pressed with poll time of N seconds",
"N\n" "N\n"
" - sleep processor until any key is pressed with poll time of N seconds\n" " - sleep processor until any key is pressed with poll time of N seconds\n"
"pause\n" "pause\n"
" - sleep processor until any key is pressed with poll time of 1 second\n"); " - sleep processor until any key is pressed with poll time of 1 second\n");
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig, U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
"swrecon - trigger a board reconfigure to the software selected configuration\n", "trigger a board reconfigure to the software selected configuration",
"\n" "\n"
" - trigger a board reconfigure to the software selected configuration\n"); " - trigger a board reconfigure to the software selected configuration\n");

2
board/amirix/ap1000/powerspan.c
View File

@ -478,7 +478,7 @@ int do_eeprom (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD (eeprom, 4, 0, do_eeprom, U_BOOT_CMD (eeprom, 4, 0, do_eeprom,
"eeprom - read/write/copy to/from the PowerSpan II eeprom\n", "read/write/copy to/from the PowerSpan II eeprom",
"eeprom r OFF [NUM]\n" "eeprom r OFF [NUM]\n"
" - read NUM words starting at OFF\n" " - read NUM words starting at OFF\n"
"eeprom w OFF VAL\n" "eeprom w OFF VAL\n"

6
board/barco/barco.c
View File

@ -306,19 +306,19 @@ int barcobcd_boot_image (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD ( U_BOOT_CMD (
try_working, 1, 1, barcobcd_boot_image, try_working, 1, 1, barcobcd_boot_image,
" try_working - check flash value and boot the appropriate image\n", "check flash value and boot the appropriate image",
"\n" "\n"
); );
U_BOOT_CMD ( U_BOOT_CMD (
boot_working, 1, 1, barcobcd_boot_image, boot_working, 1, 1, barcobcd_boot_image,
" boot_working - check flash value and boot the appropriate image\n", "check flash value and boot the appropriate image",
"\n" "\n"
); );
U_BOOT_CMD ( U_BOOT_CMD (
boot_default, 1, 1, barcobcd_boot_image, boot_default, 1, 1, barcobcd_boot_image,
" boot_default - check flash value and boot the appropriate image\n", "check flash value and boot the appropriate image",
"\n" "\n"
); );
/* /*

10
board/bc3450/cmd_bc3450.c
View File

@ -194,7 +194,7 @@ int cmd_dip (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD (dip, 1, 1, cmd_dip, U_BOOT_CMD (dip, 1, 1, cmd_dip,
"dip - read dip switch and config inputs\n", "read dip switch and config inputs",
"\n" "\n"
" - prints the state of the dip switch and/or\n" " - prints the state of the dip switch and/or\n"
" external configuration inputs as hex value.\n" " external configuration inputs as hex value.\n"
@ -228,7 +228,7 @@ static int cmd_buz (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD (buz, 2, 1, cmd_buz, U_BOOT_CMD (buz, 2, 1, cmd_buz,
"buz - turns buzzer on/off\n", "turns buzzer on/off",
"\n" "buz <on/off>\n" " - turns the buzzer on or off\n"); "\n" "buz <on/off>\n" " - turns the buzzer on or off\n");
#endif /* CONFIG_BC3450_BUZZER */ #endif /* CONFIG_BC3450_BUZZER */
@ -322,7 +322,7 @@ static int cmd_fp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD (fp, 3, 1, cmd_fp, U_BOOT_CMD (fp, 3, 1, cmd_fp,
"fp - front panes access functions\n", "front panes access functions",
"\n" "\n"
"fp bl <on/off>\n" "fp bl <on/off>\n"
" - turns the CCFL backlight of the display on/off\n" " - turns the CCFL backlight of the display on/off\n"
@ -523,7 +523,7 @@ static int cmd_temp (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD (temp, 3, 1, cmd_temp, U_BOOT_CMD (temp, 3, 1, cmd_temp,
"temp - print current temperature\n", "print current temperature",
"\n" "temp\n" " - print current temperature\n"); "\n" "temp\n" " - print current temperature\n");
#ifdef CONFIG_BC3450_CAN #ifdef CONFIG_BC3450_CAN
@ -816,7 +816,7 @@ int cmd_test (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return 1; return 1;
} }
U_BOOT_CMD (test, 2, 1, cmd_test, "test - unit test routines\n", "\n" U_BOOT_CMD (test, 2, 1, cmd_test, "unit test routines", "\n"
#ifdef CONFIG_BC3450_CAN #ifdef CONFIG_BC3450_CAN
"test can\n" "test can\n"
" - connect CAN1 (X8) with CAN2 (X9) for this test\n" " - connect CAN1 (X8) with CAN2 (X9) for this test\n"

2
board/bf537-stamp/cmd_bf537led.c
View File

@ -196,6 +196,6 @@ void show_cmd_usage()
/* Register information for u-boot to find this command */ /* Register information for u-boot to find this command */
U_BOOT_CMD(led, 3, 1, do_bf537led, U_BOOT_CMD(led, 3, 1, do_bf537led,
"led- Control BF537 stamp LEDs\n", USAGE_LONG); "Control BF537 stamp LEDs", USAGE_LONG);
#endif #endif

2
board/cm5200/cmd_cm5200.c
View File

@ -435,7 +435,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
fkt, 4, 1, cmd_fkt, fkt, 4, 1, cmd_fkt,
"fkt - Function test routines\n", "Function test routines",
"i2c\n" "i2c\n"
" - Test I2C communication\n" " - Test I2C communication\n"
"fkt led\n" "fkt led\n"

2
board/delta/delta.c
View File

@ -259,7 +259,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
kbd, 1, 1, do_kbd, kbd, 1, 1, do_kbd,
"kbd - read keyboard status\n", "read keyboard status",
NULL NULL
); );

6
board/esd/ar405/ar405.c
View File

@ -247,7 +247,7 @@ int do_digtest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
digtest, 3, 1, do_digtest, digtest, 3, 1, do_digtest,
"digtest - Test digital in-/output\n", "Test digital in-/output",
NULL NULL
); );
@ -341,7 +341,7 @@ int do_anatest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
anatest, 2, 1, do_anatest, anatest, 2, 1, do_anatest,
"anatest - Test analog in-/output\n", "Test analog in-/output",
NULL NULL
); );
@ -408,7 +408,7 @@ int do_inctest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
inctest, 3, 1, do_inctest, inctest, 3, 1, do_inctest,
"inctest - Test incremental encoder inputs\n", "Test incremental encoder inputs",
NULL NULL
); );
#endif #endif

2
board/esd/cms700/cms700.c
View File

@ -198,7 +198,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL); NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

2
board/esd/common/auto_update.c
View File

@ -550,7 +550,7 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
autoupd, 1, 1, auto_update, autoupd, 1, 1, auto_update,
"autoupd - Automatically update images\n", "Automatically update images",
NULL NULL
); );
#endif /* CONFIG_AUTO_UPDATE */ #endif /* CONFIG_AUTO_UPDATE */

2
board/esd/common/cmd_loadpci.c
View File

@ -123,7 +123,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
loadpci, 1, 1, do_loadpci, loadpci, 1, 1, do_loadpci,
"loadpci - Wait for pci bootcmd and boot it\n", "Wait for pci bootcmd and boot it",
NULL NULL
); );

2
board/esd/common/lcd.c
View File

@ -372,6 +372,6 @@ int do_esdbmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
esdbmp, 2, 1, do_esdbmp, esdbmp, 2, 1, do_esdbmp,
"esdbmp - display BMP image\n", "display BMP image",
"<imageAddr> - display image\n" "<imageAddr> - display image\n"
); );

2
board/esd/common/xilinx_jtag/micro.c
View File

@ -1859,6 +1859,6 @@ int do_cpld(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
cpld, 1, 1, do_cpld, cpld, 1, 1, do_cpld,
"cpld - Program onboard CPLD\n", "Program onboard CPLD",
NULL NULL
); );

2
board/esd/cpci2dp/cpci2dp.c
View File

@ -176,7 +176,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
eepwren, 2, 0, do_eep_wren, eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL NULL
); );
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

6
board/esd/cpci405/cpci405.c
View File

@ -689,7 +689,7 @@ int do_onewire(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
onewire, 1, 1, do_onewire, onewire, 1, 1, do_onewire,
"onewire - Read 1-write ID\n", "Read 1-write ID",
NULL NULL
); );
@ -750,7 +750,7 @@ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
getbpip, 1, 1, do_get_bpip, getbpip, 1, 1, do_get_bpip,
"getbpip - Update IP-Address with Backplane IP-Address\n", "Update IP-Address with Backplane IP-Address",
NULL NULL
); );
@ -786,7 +786,7 @@ int do_set_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
setbpip, 2, 1, do_set_bpip, setbpip, 2, 1, do_set_bpip,
"setbpip - Write Backplane IP-Address\n", "Write Backplane IP-Address",
NULL NULL
); );

2
board/esd/cpci5200/cpci5200.c
View File

@ -294,5 +294,5 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(writepci, 3, 1, do_writepci, U_BOOT_CMD(writepci, 3, 1, do_writepci,
"writepci- Write some data to pcibus\n", "Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n"); "<addr> <size>\n" " - Write some data to pcibus.\n");

2
board/esd/cpci750/cpci750.c
View File

@ -993,6 +993,6 @@ int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
show_config, 1, 1, do_show_config, show_config, 1, 1, do_show_config,
"show_config - Show Marvell strapping register\n", "Show Marvell strapping register",
"Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n"
); );

2
board/esd/dasa_sim/cmd_dasa_sim.c
View File

@ -227,7 +227,7 @@ int do_pci9054 (cmd_tbl_t * cmdtp, int flag, int argc,
U_BOOT_CMD( U_BOOT_CMD(
pci9054, 3, 1, do_pci9054, pci9054, 3, 1, do_pci9054,
"pci9054 - PLX PCI9054 EEPROM access\n", "PLX PCI9054 EEPROM access",
"pci9054 info - print EEPROM values\n" "pci9054 info - print EEPROM values\n"
"pci9054 update - updates EEPROM with default values\n" "pci9054 update - updates EEPROM with default values\n"
); );

16
board/esd/du440/du440.c
View File

@ -606,7 +606,7 @@ int do_dcf77(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
dcf77, 1, 1, do_dcf77, dcf77, 1, 1, do_dcf77,
"dcf77 - Check DCF77 receiver\n", "Check DCF77 receiver",
NULL NULL
); );
@ -656,7 +656,7 @@ int do_hubinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
hubinit, 1, 1, do_hubinit, hubinit, 1, 1, do_hubinit,
"hubinit - Initialize USB hub\n", "Initialize USB hub",
NULL NULL
); );
#endif /* CONFIG_I2C_MULTI_BUS */ #endif /* CONFIG_I2C_MULTI_BUS */
@ -789,7 +789,7 @@ int do_setup_boot_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
sbe, 2, 0, do_setup_boot_eeprom, sbe, 2, 0, do_setup_boot_eeprom,
"sbe - setup boot eeprom\n", "setup boot eeprom",
NULL NULL
); );
@ -863,7 +863,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL); NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
@ -914,7 +914,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
wpi, 1, 1, do_waitpwrirq, wpi, 1, 1, do_waitpwrirq,
"wpi - Wait for power change interrupt\n", "Wait for power change interrupt",
NULL NULL
); );
@ -959,7 +959,7 @@ int do_dviinit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
dviinit, 1, 1, do_dviinit, dviinit, 1, 1, do_dviinit,
"dviinit - Initialize DVI Panellink transmitter\n", "Initialize DVI Panellink transmitter",
NULL NULL
); );
@ -999,7 +999,7 @@ int do_time(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
time, CONFIG_SYS_MAXARGS, 1, do_time, time, CONFIG_SYS_MAXARGS, 1, do_time,
"time - run command and output execution time\n", "run command and output execution time",
NULL NULL
); );
@ -1049,6 +1049,6 @@ int do_gfxdemo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo, gfxdemo, CONFIG_SYS_MAXARGS, 1, do_gfxdemo,
"gfxdemo - demo\n", "demo",
NULL NULL
); );

2
board/esd/hh405/hh405.c
View File

@ -733,7 +733,7 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL); NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

4
board/esd/ocrtc/cmd_ocrtc.c
View File

@ -54,7 +54,7 @@ int do_setdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
setdevice, 1, 1, do_setdevice, setdevice, 1, 1, do_setdevice,
"setdevice - Set device number on pci adapter boards\n", "Set device number on pci adapter boards",
NULL NULL
); );
@ -77,7 +77,7 @@ int do_getdevice(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
getdevice, 1, 1, do_getdevice, getdevice, 1, 1, do_getdevice,
"getdevice - Get device number and set slot env variable\n", "Get device number and set slot env variable",
NULL NULL
); );

2
board/esd/pci405/cmd_pci405.c
View File

@ -108,7 +108,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
loadpci, 1, 1, do_loadpci, loadpci, 1, 1, do_loadpci,
"loadpci - Wait for pci-image and boot it\n", "Wait for pci-image and boot it",
NULL NULL
); );
#endif #endif

2
board/esd/pci405/pci405.c
View File

@ -375,7 +375,7 @@ int do_wpeeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
wpeeprom, 2, 1, do_wpeeprom, wpeeprom, 2, 1, do_wpeeprom,
"wpeeprom - Check/Enable/Disable I2C EEPROM write protection\n", "Check/Enable/Disable I2C EEPROM write protection",
"wpeeprom\n" "wpeeprom\n"
" - check I2C EEPROM write protection state\n" " - check I2C EEPROM write protection state\n"
"wpeeprom 1\n" "wpeeprom 1\n"

6
board/esd/pf5200/pf5200.c
View File

@ -294,7 +294,7 @@ int do_poweroff(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
return (0); return (0);
} }
U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "poweroff- Switch off power\n", NULL); U_BOOT_CMD(poweroff, 1, 1, do_poweroff, "Switch off power", NULL);
int phypower(int flag) int phypower(int flag)
{ {
@ -338,7 +338,7 @@ int do_phypower(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(phypower, 2, 2, do_phypower, U_BOOT_CMD(phypower, 2, 2, do_phypower,
"phypower- Switch power of ethernet phy\n", NULL); "Switch power of ethernet phy", NULL);
int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{ {
@ -369,5 +369,5 @@ int do_writepci(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(writepci, 3, 1, do_writepci, U_BOOT_CMD(writepci, 3, 1, do_writepci,
"writepci- Write some data to pcibus\n", "Write some data to pcibus",
"<addr> <size>\n" " - Write some data to pcibus.\n"); "<addr> <size>\n" " - Write some data to pcibus.\n");

2
board/esd/plu405/plu405.c
View File

@ -333,6 +333,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL); NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

2
board/esd/pmc405/pmc405.c
View File

@ -203,6 +203,6 @@ int do_cantest(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
cantest, 3, 1, do_cantest, cantest, 3, 1, do_cantest,
"cantest - Test CAN controller", "Test CAN controller",
NULL NULL
); );

18
board/esd/pmc440/cmd_pmc440.c
View File

@ -98,7 +98,7 @@ int do_waithci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
waithci, 1, 1, do_waithci, waithci, 1, 1, do_waithci,
"waithci - Wait for host control interrupt\n", "Wait for host control interrupt",
NULL NULL
); );
@ -258,7 +258,7 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
fifo, 5, 1, do_fifo, fifo, 5, 1, do_fifo,
"fifo - Fifo module operations\n", "Fifo module operations",
"wait\nfifo read\n" "wait\nfifo read\n"
"fifo write fifo(0..3) data [cnt=1]\n" "fifo write fifo(0..3) data [cnt=1]\n"
"fifo write address(>=4) data [cnt=1]\n" "fifo write address(>=4) data [cnt=1]\n"
@ -336,7 +336,7 @@ int do_setup_bootstrap_eeprom(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
} }
U_BOOT_CMD( U_BOOT_CMD(
sbe, 4, 0, do_setup_bootstrap_eeprom, sbe, 4, 0, do_setup_bootstrap_eeprom,
"sbe - setup bootstrap eeprom\n", "setup bootstrap eeprom",
"<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]" "<cpufreq:400|533|667> [<console-uart:0|1> [<bringup delay (0..20s)>]]"
); );
@ -399,7 +399,7 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
painit, 1, 1, do_painit, painit, 1, 1, do_painit,
"painit - prepare PciAccess system\n", "prepare PciAccess system",
NULL NULL
); );
#endif /* CONFIG_PRAM */ #endif /* CONFIG_PRAM */
@ -411,7 +411,7 @@ int do_selfreset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
selfreset, 1, 1, do_selfreset, selfreset, 1, 1, do_selfreset,
"selfreset- assert self-reset# signal\n", "assert self-reset# signal",
NULL NULL
); );
@ -448,7 +448,7 @@ int do_resetout(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
resetout, 2, 1, do_resetout, resetout, 2, 1, do_resetout,
"resetout - assert PMC-RESETOUT# signal\n", "assert PMC-RESETOUT# signal",
NULL NULL
); );
@ -480,7 +480,7 @@ int do_inta(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
inta, 2, 1, do_inta, inta, 2, 1, do_inta,
"inta - Assert/Deassert or query INTA# state in non-monarch mode\n", "Assert/Deassert or query INTA# state in non-monarch mode",
NULL NULL
); );
@ -513,7 +513,7 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
pmm, 2, 1, do_pmm, pmm, 2, 1, do_pmm,
"pmm - Setup pmm[1] registers\n", "Setup pmm[1] registers",
"<pciaddr> (pciaddr will be aligned to 256MB)\n" "<pciaddr> (pciaddr will be aligned to 256MB)\n"
); );
@ -549,7 +549,7 @@ int do_eep_wren(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
return state; return state;
} }
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL); NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

12
board/esd/tasreg/tasreg.c
View File

@ -248,7 +248,7 @@ int do_iploop(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
iploop, 2, 1, do_iploop, iploop, 2, 1, do_iploop,
"iploop - iprobe loop <addr>\n", "iprobe loop <addr>",
NULL NULL
); );
@ -301,7 +301,7 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
codec, 1, 1, do_codec, codec, 1, 1, do_codec,
"codec - Enable codec\n", "Enable codec",
NULL NULL
); );
@ -334,7 +334,7 @@ int do_saa(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
saa, 5, 1, do_saa, saa, 5, 1, do_saa,
"saa - Write to SAA1064 <addr> <instr> <cntrl> <data>\n", "Write to SAA1064 <addr> <instr> <cntrl> <data>",
NULL NULL
); );
@ -373,7 +373,7 @@ int do_iwrite(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
iwrite, 6, 1, do_iwrite, iwrite, 6, 1, do_iwrite,
"iwrite - Write n bytes to I2C-device\n", "Write n bytes to I2C-device",
"addr cnt data0 ... datan\n" "addr cnt data0 ... datan\n"
); );
@ -405,7 +405,7 @@ int do_iread(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
iread, 3, 1, do_iread, iread, 3, 1, do_iread,
"iread - Read from I2C <addr> <cnt>\n", "Read from I2C <addr> <cnt>",
NULL NULL
); );
@ -443,7 +443,7 @@ int do_ireadl(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
ireadl, 2, 1, do_ireadl, ireadl, 2, 1, do_ireadl,
"ireadl - Read-loop from I2C <addr>\n", "Read-loop from I2C <addr>",
NULL NULL
); );
#endif #endif

2
board/esd/voh405/voh405.c
View File

@ -392,6 +392,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
"eepwren - Enable / disable / query EEPROM write access\n", "Enable / disable / query EEPROM write access",
NULL); NULL);
#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */ #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */

6
board/evb64260/zuma_pbb.c
View File

@ -202,19 +202,19 @@ do_zuma_init_mbox (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
zinit, 1, 0, do_zuma_init_pbb, zinit, 1, 0, do_zuma_init_pbb,
"zinit - init zuma pbb\n", "init zuma pbb",
"\n" "\n"
" - init zuma pbb\n" " - init zuma pbb\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
zdtest, 3, 1, do_zuma_test_dma, zdtest, 3, 1, do_zuma_test_dma,
"zdtest - run dma test\n", "run dma test",
"[cmd [count]]\n" "[cmd [count]]\n"
" - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n" " - run dma cmd (w=0,v=1,cp=2,cmp=3,wi=4,vi=5), count bytes\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
zminit, 1, 0, do_zuma_init_mbox, zminit, 1, 0, do_zuma_init_mbox,
"zminit - init zuma mbox\n", "init zuma mbox",
"\n" "\n"
" - init zuma mbox\n" " - init zuma mbox\n"
); );

4
board/freescale/common/pixis.c
View File

@ -280,7 +280,7 @@ int pixis_disable_watchdog_cmd(cmd_tbl_t *cmdtp,
U_BOOT_CMD( U_BOOT_CMD(
diswd, 1, 0, pixis_disable_watchdog_cmd, diswd, 1, 0, pixis_disable_watchdog_cmd,
"diswd - Disable watchdog timer \n", "Disable watchdog timer",
NULL); NULL);
#ifdef CONFIG_PIXIS_SGMII_CMD #ifdef CONFIG_PIXIS_SGMII_CMD
@ -539,7 +539,7 @@ pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd, pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
"pixis_reset - Reset the board using the FPGA sequencer\n", "Reset the board using the FPGA sequencer",
" pixis_reset\n" " pixis_reset\n"
" pixis_reset [altbank]\n" " pixis_reset [altbank]\n"
" pixis_reset altbank wd\n" " pixis_reset altbank wd\n"

2
board/freescale/mpc8610hpcd/mpc8610hpcd_diu.c
View File

@ -138,7 +138,7 @@ int mpc8610diu_init_show_bmp(cmd_tbl_t *cmdtp,
U_BOOT_CMD( U_BOOT_CMD(
diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp, diufb, CONFIG_SYS_MAXARGS, 1, mpc8610diu_init_show_bmp,
"diufb - Init or Display BMP file\n", "Init or Display BMP file",
"init\n - initialize DIU\n" "init\n - initialize DIU\n"
"addr\n - display bmp at address 'addr'\n" "addr\n - display bmp at address 'addr'\n"
); );

6
board/g2000/g2000.c
View File

@ -185,7 +185,7 @@ int do_dumpebc(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
dumpebc, 1, 1, do_dumpebc, dumpebc, 1, 1, do_dumpebc,
"dumpebc - Dump all EBC registers\n", "Dump all EBC registers",
NULL NULL
); );
@ -207,7 +207,7 @@ int do_dumpdcr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
dumpdcr, 1, 1, do_dumpdcr, dumpdcr, 1, 1, do_dumpdcr,
"dumpdcr - Dump all DCR registers\n", "Dump all DCR registers",
NULL NULL
); );
@ -271,7 +271,7 @@ int do_dumpspr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
dumpspr, 1, 1, do_dumpspr, dumpspr, 1, 1, do_dumpspr,
"dumpspr - Dump all SPR registers\n", "Dump all SPR registers",
NULL NULL
); );
#endif #endif

4
board/hymod/bsp.c
View File

@ -277,7 +277,7 @@ do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
fpga, 6, 1, do_fpga, fpga, 6, 1, do_fpga,
"fpga - FPGA sub-system\n", "FPGA sub-system",
"load [type] addr size\n" "load [type] addr size\n"
" - write the configuration data at memory address `addr',\n" " - write the configuration data at memory address `addr',\n"
" size `size' bytes, into the FPGA of type `type' (either\n" " size `size' bytes, into the FPGA of type `type' (either\n"
@ -336,7 +336,7 @@ do_eecl (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
eeclear, 1, 0, do_eecl, eeclear, 1, 0, do_eecl,
"eeclear - Clear the eeprom on a Hymod board \n", "Clear the eeprom on a Hymod board",
"[type]\n" "[type]\n"
" - write zeroes into the EEPROM on the board of type `type'\n" " - write zeroes into the EEPROM on the board of type `type'\n"
" (`type' is either `main' or `mezz' - default `main')\n" " (`type' is either `main' or `mezz' - default `main')\n"

4
board/keymile/common/keymile_hdlc_enet.c
View File

@ -590,7 +590,7 @@ int hdlc_enet_stest(struct cmd_tbl_s *a, int b, int c, char **d)
} }
U_BOOT_CMD( U_BOOT_CMD(
stest, 1, 1, hdlc_enet_stest, stest, 1, 1, hdlc_enet_stest,
"stest - simple send test for hdlc_enet\n", "simple send test for hdlc_enet",
"no arguments\n" "no arguments\n"
); );
/* simple receive test routine */ /* simple receive test routine */
@ -612,7 +612,7 @@ int hdlc_enet_rtest(struct cmd_tbl_s *a, int b, int c, char **d)
} }
U_BOOT_CMD( U_BOOT_CMD(
rtest, 1, 1, hdlc_enet_rtest, rtest, 1, 1, hdlc_enet_rtest,
"rtest - simple receive test for hdlc_enet\n", "simple receive test for hdlc_enet",
"no arguments\n" "no arguments\n"
); );
#endif #endif

6
board/lwmon/lwmon.c
View File

@ -851,7 +851,7 @@ int do_pic (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
pic, 4, 1, do_pic, pic, 4, 1, do_pic,
"pic - read and write PIC registers\n", "read and write PIC registers",
"read reg - read PIC register `reg'\n" "read reg - read PIC register `reg'\n"
"pic write reg val - write value `val' to PIC register `reg'\n" "pic write reg val - write value `val' to PIC register `reg'\n"
); );
@ -910,7 +910,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
kbd, 1, 1, do_kbd, kbd, 1, 1, do_kbd,
"kbd - read keyboard status\n", "read keyboard status",
NULL NULL
); );
@ -982,7 +982,7 @@ int do_lsb (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
lsb, 2, 1, do_lsb, lsb, 2, 1, do_lsb,
"lsb - check and set LSB switch\n", "check and set LSB switch",
"on - switch LSB on\n" "on - switch LSB on\n"
"lsb off - switch LSB off\n" "lsb off - switch LSB off\n"
"lsb - print current setting\n" "lsb - print current setting\n"

2
board/lwmon5/kbd.c
View File

@ -432,7 +432,7 @@ int do_kbd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
kbd, 1, 1, do_kbd, kbd, 1, 1, do_kbd,
"kbd - read keyboard status\n", "read keyboard status",
NULL NULL
); );

2
board/lwmon5/lwmon5.c
View File

@ -486,7 +486,7 @@ int do_eeprom_wp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
eepromwp, 2, 0, do_eeprom_wp, eepromwp, 2, 0, do_eeprom_wp,
"eepromwp- eeprom write protect off/on\n", "eeprom write protect off/on",
"<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n" "<on|off> - enable (on) or disable (off) I2C EEPROM write protect\n"
); );

2
board/mpl/mip405/cmd_mip405.c
View File

@ -55,7 +55,7 @@ int do_mip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
mip405, 8, 1, do_mip405, mip405, 8, 1, do_mip405,
"mip405 - MIP405 specific Cmds\n", "MIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n" "flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"mip405 flash mps - updates U-Boot with image from MPS\n" "mip405 flash mps - updates U-Boot with image from MPS\n"
"mip405 info - displays board information\n" "mip405 info - displays board information\n"

2
board/mpl/pati/cmd_pati.c
View File

@ -427,7 +427,7 @@ int do_pati(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
pati, 8, 1, do_pati, pati, 8, 1, do_pati,
"pati - PATI specific Cmds\n", "PATI specific Cmds",
"info - displays board information\n" "info - displays board information\n"
"pati pci - displays PCI registers\n" "pati pci - displays PCI registers\n"
"pati led <nr> <on> \n" "pati led <nr> <on> \n"

2
board/mpl/pip405/cmd_pip405.c
View File

@ -60,7 +60,7 @@ int do_pip405(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
pip405, 6, 1, do_pip405, pip405, 6, 1, do_pip405,
"pip405 - PIP405 specific Cmds\n", "PIP405 specific Cmds",
"flash mem [SrcAddr] - updates U-Boot with image in memory\n" "flash mem [SrcAddr] - updates U-Boot with image in memory\n"
"pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n" "pip405 flash floppy [SrcAddr] - updates U-Boot with image from floppy\n"
"pip405 flash mps - updates U-Boot with image from MPS\n" "pip405 flash mps - updates U-Boot with image from MPS\n"

2
board/mpl/vcma9/cmd_vcma9.c
View File

@ -175,6 +175,6 @@ int do_vcma9(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
vcma9, 6, 1, do_vcma9, vcma9, 6, 1, do_vcma9,
"vcma9 - VCMA9 specific commands\n", "VCMA9 specific commands",
"flash mem [SrcAddr]\n - updates U-Boot with image in memory\n" "flash mem [SrcAddr]\n - updates U-Boot with image in memory\n"
); );

2
board/pcippc2/pcippc2.c
View File

@ -236,7 +236,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
wd, 2, 1, do_wd, wd, 2, 1, do_wd,
"wd - check and set watchdog\n", "check and set watchdog",
"on - switch watchDog on\n" "on - switch watchDog on\n"
"wd off - switch watchdog off\n" "wd off - switch watchdog off\n"
"wd - print current status\n" "wd - print current status\n"

4
board/pcs440ep/pcs440ep.c
View File

@ -761,7 +761,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
led, 2, 1, do_led, led, 2, 1, do_led,
"led - set the DIAG-LED\n", "set the DIAG-LED",
"[bitmask] 0x01 = DIAG 1 on\n" "[bitmask] 0x01 = DIAG 1 on\n"
" 0x02 = DIAG 2 on\n" " 0x02 = DIAG 2 on\n"
" 0x04 = DIAG 3 on\n" " 0x04 = DIAG 3 on\n"
@ -823,7 +823,7 @@ int do_sha1 (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
sha1, 4, 1, do_sha1, sha1, 4, 1, do_sha1,
"sha1 - calculate the SHA1 Sum\n", "calculate the SHA1 Sum",
"address len [addr] calculate the SHA1 sum [save at addr]\n" "address len [addr] calculate the SHA1 sum [save at addr]\n"
" -p calculate the SHA1 sum from the U-Boot image in flash and print\n" " -p calculate the SHA1 sum from the U-Boot image in flash and print\n"
" -c check the U-Boot image in flash\n" " -c check the U-Boot image in flash\n"

4
board/pn62/cmd_pn62.c
View File

@ -53,7 +53,7 @@ int do_led (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD( U_BOOT_CMD(
led , 3, 1, do_led, led , 3, 1, do_led,
"led - set LED 0..11 on the PN62 board\n", "set LED 0..11 on the PN62 board",
"i fun\n" "i fun\n"
" - set 'i'th LED to function 'fun'\n" " - set 'i'th LED to function 'fun'\n"
); );
@ -174,7 +174,7 @@ int do_loadpci (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
loadpci, 2, 1, do_loadpci, loadpci, 2, 1, do_loadpci,
"loadpci - load binary file over PCI\n", "load binary file over PCI",
"[addr]\n" "[addr]\n"
" - load binary file over PCI to address 'addr'\n" " - load binary file over PCI to address 'addr'\n"
); );

2
board/prodrive/pdnb3/pdnb3.c
View File

@ -227,7 +227,7 @@ int do_fpga(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
fpga, 2, 0, do_fpga, fpga, 2, 0, do_fpga,
"fpga - boot FPGA\n", "boot FPGA",
"address size\n - boot FPGA with gzipped image at <address>\n" "address size\n - boot FPGA with gzipped image at <address>\n"
); );

2
board/pxa255_idp/pxa_idp.c
View File

@ -128,7 +128,7 @@ int do_idpcmd(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd, U_BOOT_CMD(idpcmd, CONFIG_SYS_MAXARGS, 0, do_idpcmd,
"idpcmd - custom IDP command\n", "custom IDP command",
"no args at this time\n" "no args at this time\n"
); );

2
board/r360mpi/r360mpi.c
View File

@ -414,6 +414,6 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
kbd, 1, 1, do_kbd, kbd, 1, 1, do_kbd,
"kbd - read keyboard status\n", "read keyboard status",
NULL NULL
); );

4
board/renesas/sh7785lcr/rtl8169_mac.c
View File

@ -323,7 +323,7 @@ int do_set_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
setmac, 2, 1, do_set_mac, setmac, 2, 1, do_set_mac,
"setmac - write MAC address for RTL8110SCL\n", "write MAC address for RTL8110SCL",
"\n" "\n"
"setmac <mac address> - write MAC address for RTL8110SCL\n" "setmac <mac address> - write MAC address for RTL8110SCL\n"
); );
@ -342,7 +342,7 @@ int do_print_mac(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
printmac, 1, 1, do_print_mac, printmac, 1, 1, do_print_mac,
"printmac - print MAC address for RTL8110\n", "print MAC address for RTL8110",
"\n" "\n"
" - print MAC address for RTL8110\n" " - print MAC address for RTL8110\n"
); );

2
board/renesas/sh7785lcr/selfcheck.c
View File

@ -159,7 +159,7 @@ int do_hw_test(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
hwtest, 2, 1, do_hw_test, hwtest, 2, 1, do_hw_test,
"hwtest - hardware test for R0P7785LC0011RL board\n", "hardware test for R0P7785LC0011RL board",
"\n" "\n"
"hwtest all - test all hardware\n" "hwtest all - test all hardware\n"
"hwtest pld - output PLD version\n" "hwtest pld - output PLD version\n"

2
board/sandburst/common/ppc440gx_i2c.c
View File

@ -500,7 +500,7 @@ int do_i2c1_probe(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
iprobe1, 1, 1, do_i2c1_probe, iprobe1, 1, 1, do_i2c1_probe,
"iprobe1 - probe to discover valid I2C chip addresses\n", "probe to discover valid I2C chip addresses",
"\n -discover valid I2C chip addresses\n" "\n -discover valid I2C chip addresses\n"
); );

4
board/sandburst/karef/karef.c
View File

@ -578,7 +578,7 @@ int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, U_BOOT_CMD(kasetup, 1, 1, karefSetupVars,
"kasetup - Set environment to factory defaults\n", NULL); "Set environment to factory defaults", NULL);
U_BOOT_CMD(karecover, 1, 1, karefRecover, U_BOOT_CMD(karecover, 1, 1, karefRecover,
"karecover - Set environment to allow for fs recovery\n", NULL); "Set environment to allow for fs recovery", NULL);

4
board/sandburst/metrobox/metrobox.c
View File

@ -544,7 +544,7 @@ int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars, U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars,
"mbsetup - Set environment to factory defaults\n", NULL); "Set environment to factory defaults", NULL);
U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover, U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover,
"mbrecover - Set environment to allow for fs recovery\n", NULL); "Set environment to allow for fs recovery", NULL);

2
board/siemens/common/fpga.c
View File

@ -292,7 +292,7 @@ int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
fpga, 4, 1, do_fpga, fpga, 4, 1, do_fpga,
"fpga - access FPGA(s)\n", "access FPGA(s)",
"fpga status [name] - print FPGA status\n" "fpga status [name] - print FPGA status\n"
"fpga reset [name] - reset FPGA\n" "fpga reset [name] - reset FPGA\n"
"fpga load [name] addr - load FPGA configuration data\n" "fpga load [name] addr - load FPGA configuration data\n"

2
board/siemens/pcu_e/pcu_e.c
View File

@ -404,7 +404,7 @@ int do_puma (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD (puma, 4, 1, do_puma, U_BOOT_CMD (puma, 4, 1, do_puma,
"puma - access PUMA FPGA\n", "access PUMA FPGA",
"status - print PUMA status\n" "status - print PUMA status\n"
"puma load addr len - load PUMA configuration data\n"); "puma load addr len - load PUMA configuration data\n");

2
board/ssv/common/cmd_sled.c
View File

@ -156,7 +156,7 @@ int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
#endif #endif
U_BOOT_CMD (sled, 3, 0, do_sled, U_BOOT_CMD (sled, 3, 0, do_sled,
"sled - check and set status led\n", "check and set status led",
"sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n"); "sled [name [state]]\n" __NAME_STR " - state: on|off|blink\n");
#endif #endif
#endif /* CONFIG_STATUS_LED */ #endif /* CONFIG_STATUS_LED */

2
board/ssv/common/wd_pio.c
View File

@ -151,7 +151,7 @@ int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
wd, 2, 1, do_wd, wd, 2, 1, do_wd,
"wd - check and set watchdog\n", "check and set watchdog",
"on - switch watchDog on\n" "on - switch watchDog on\n"
"wd off - switch watchdog off\n" "wd off - switch watchdog off\n"
"wd - print current status\n" "wd - print current status\n"

10
board/tqc/tqm5200/cmd_stk52xx.c
View File

@ -1194,7 +1194,7 @@ int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
sound , 5, 1, cmd_sound, sound , 5, 1, cmd_sound,
"sound - Sound sub-system\n", "Sound sub-system",
"saw [duration] [freq] [channel]\n" "saw [duration] [freq] [channel]\n"
" - generate sawtooth for 'duration' ms with frequency 'freq'\n" " - generate sawtooth for 'duration' ms with frequency 'freq'\n"
" on left \"l\" or right \"r\" channel\n" " on left \"l\" or right \"r\" channel\n"
@ -1206,14 +1206,14 @@ U_BOOT_CMD(
U_BOOT_CMD( U_BOOT_CMD(
wav , 3, 1, cmd_wav, wav , 3, 1, cmd_wav,
"wav - play wav file\n", "play wav file",
"[addr] [bytes]\n" "[addr] [bytes]\n"
" - play wav file at address 'addr' with length 'bytes'\n" " - play wav file at address 'addr' with length 'bytes'\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
beep , 2, 1, cmd_beep, beep , 2, 1, cmd_beep,
"beep - play short beep\n", "play short beep",
"[channel]\n" "[channel]\n"
" - play short beep on \"l\"eft or \"r\"ight channel\n" " - play short beep on \"l\"eft or \"r\"ight channel\n"
); );
@ -1222,7 +1222,7 @@ U_BOOT_CMD(
#if defined(CONFIG_STK52XX) #if defined(CONFIG_STK52XX)
U_BOOT_CMD( U_BOOT_CMD(
fkt , 4, 1, cmd_fkt, fkt , 4, 1, cmd_fkt,
"fkt - Function test routines\n", "Function test routines",
"led number on/off\n" "led number on/off\n"
" - 'number's like printed on STK52XX board\n" " - 'number's like printed on STK52XX board\n"
"fkt can\n" "fkt can\n"
@ -1237,7 +1237,7 @@ U_BOOT_CMD(
#elif defined(CONFIG_FO300) #elif defined(CONFIG_FO300)
U_BOOT_CMD( U_BOOT_CMD(
fkt , 3, 1, cmd_fkt, fkt , 3, 1, cmd_fkt,
"fkt - Function test routines\n", "Function test routines",
"fkt can\n" "fkt can\n"
" - loopback plug for X16/X29 required\n" " - loopback plug for X16/X29 required\n"
"fkt rs232 number\n" "fkt rs232 number\n"

4
board/tqc/tqm5200/cmd_tb5200.c
View File

@ -90,13 +90,13 @@ int cmd_backlight(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
led , 2, 1, cmd_led, led , 2, 1, cmd_led,
"led - switch status LED on or off\n", "switch status LED on or off",
"on/off\n" "on/off\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
backlight , 2, 1, cmd_backlight, backlight , 2, 1, cmd_backlight,
"backlight - switch backlight on or off\n", "switch backlight on or off",
"on/off\n" "on/off\n"
); );

2
board/tqc/tqm8272/tqm8272.c
View File

@ -866,7 +866,7 @@ int do_hwib_dump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
hwib, 1, 1, do_hwib_dump, hwib, 1, 1, do_hwib_dump,
"hwib - dump HWIB'\n", "dump HWIB'",
"\n" "\n"
); );

12
board/trab/cmd_trab.c
View File

@ -258,7 +258,7 @@ int do_burn_in (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
burn_in, 1, 1, do_burn_in, burn_in, 1, 1, do_burn_in,
"burn_in - start burn-in test application on TRAB\n", "start burn-in test application on TRAB",
"\n" "\n"
" - start burn-in test application\n" " - start burn-in test application\n"
" The burn-in test could took a while to finish!\n" " The burn-in test could took a while to finish!\n"
@ -292,7 +292,7 @@ int do_dip (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
dip, 1, 1, do_dip, dip, 1, 1, do_dip,
"dip - read dip switch on TRAB\n", "read dip switch on TRAB",
"\n" "\n"
" - read state of dip switch (S1) on TRAB board\n" " - read state of dip switch (S1) on TRAB board\n"
" read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n" " read sequence: 1-2-3-4; ON=1; OFF=0; e.g.: \"0100\"\n"
@ -321,7 +321,7 @@ int do_vcc5v (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
vcc5v, 1, 1, do_vcc5v, vcc5v, 1, 1, do_vcc5v,
"vcc5v - read VCC5V on TRAB\n", "read VCC5V on TRAB",
"\n" "\n"
" - read actual value of voltage VCC5V\n" " - read actual value of voltage VCC5V\n"
); );
@ -346,7 +346,7 @@ int do_contact_temp (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
c_temp, 1, 1, do_contact_temp, c_temp, 1, 1, do_contact_temp,
"c_temp - read contact temperature on TRAB\n", "read contact temperature on TRAB",
"\n" "\n"
" - reads the onboard temperature (=contact temperature)\n" " - reads the onboard temperature (=contact temperature)\n"
); );
@ -398,7 +398,7 @@ int do_burn_in_status (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
bis, 1, 1, do_burn_in_status, bis, 1, 1, do_burn_in_status,
"bis - print burn in status on TRAB\n", "print burn in status on TRAB",
"\n" "\n"
" - prints the status variables of the last burn in test\n" " - prints the status variables of the last burn in test\n"
" stored in the onboard EEPROM on TRAB board\n" " stored in the onboard EEPROM on TRAB board\n"
@ -886,7 +886,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
tlog, 2, 1, do_temp_log, tlog, 2, 1, do_temp_log,
"tlog - log contact temperature [1/100 C] to console (endlessly)\n", "log contact temperature [1/100 C] to console (endlessly)",
"delay\n" "delay\n"
" - contact temperature [1/100 C] is printed endlessly to console\n" " - contact temperature [1/100 C] is printed endlessly to console\n"
" <delay> specifies the seconds to wait between two measurements\n" " <delay> specifies the seconds to wait between two measurements\n"

2
board/trab/trab.c
View File

@ -322,7 +322,7 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
kbd, 1, 1, do_kbd, kbd, 1, 1, do_kbd,
"kbd - read keyboard status\n", "read keyboard status",
NULL NULL
); );

2
board/trizepsiv/eeprom.c
View File

@ -76,7 +76,7 @@ int do_dm9000_eeprom ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) {
U_BOOT_CMD( U_BOOT_CMD(
dm9000ee,4,1,do_dm9000_eeprom, dm9000ee,4,1,do_dm9000_eeprom,
"dm9000ee- Read/Write eeprom connected to Ethernet Controller\n", "Read/Write eeprom connected to Ethernet Controller",
"\ndm9000ee write <word offset> <value> \n" "\ndm9000ee write <word offset> <value> \n"
"\tdm9000ee read \n" "\tdm9000ee read \n"
"\tword:\t\t00-02 : MAC Address\n" "\tword:\t\t00-02 : MAC Address\n"

2
board/w7o/cmd_vpd.c
View File

@ -58,7 +58,7 @@ int do_vpd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
vpd, 2, 1, do_vpd, vpd, 2, 1, do_vpd,
"vpd - Read Vital Product Data\n", "Read Vital Product Data",
"[dev_addr]\n" "[dev_addr]\n"
" - Read VPD Data from default address, or device address 'dev_addr'.\n" " - Read VPD Data from default address, or device address 'dev_addr'.\n"
); );

2
board/zeus/update.c
View File

@ -98,7 +98,7 @@ int do_update_boot_eeprom(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD ( U_BOOT_CMD (
update_boot_eeprom, 1, 1, do_update_boot_eeprom, update_boot_eeprom, 1, 1, do_update_boot_eeprom,
"update_boot_eeprom - update boot eeprom content\n", "update boot eeprom content",
NULL NULL
); );

4
board/zeus/zeus.c
View File

@ -327,7 +327,7 @@ int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
setdef, 4, 1, do_set_default, setdef, 4, 1, do_set_default,
"setdef - write board-specific values to EEPROM (ethaddr...)\n", "write board-specific values to EEPROM (ethaddr...)",
"ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n" "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
); );
@ -418,7 +418,7 @@ int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
U_BOOT_CMD ( U_BOOT_CMD (
chkreset, 1, 1, do_chkreset, chkreset, 1, 1, do_chkreset,
"chkreset- Check for status of SW-reset button and act accordingly\n", "Check for status of SW-reset button and act accordingly",
NULL NULL
); );

2
common/cmd_ambapp.c
View File

@ -273,6 +273,6 @@ int ambapp_init_reloc(void)
} }
U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print, U_BOOT_CMD(ambapp, 1, 1, do_ambapp_print,
"ambapp - list AMBA Plug&Play information\n", "list AMBA Plug&Play information",
"ambapp\n" "ambapp\n"
" - lists AMBA (AHB & APB) Plug&Play devices present on the system\n"); " - lists AMBA (AHB & APB) Plug&Play devices present on the system\n");

2
common/cmd_autoscript.c
View File

@ -230,7 +230,7 @@ do_autoscript (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
autoscr, 2, 0, do_autoscript, autoscr, 2, 0, do_autoscript,
"autoscr - run script from memory\n", "run script from memory",
"[addr] - run script starting at addr" "[addr] - run script starting at addr"
" - A valid autoscr header must be present\n" " - A valid autoscr header must be present\n"
#if defined(CONFIG_FIT) #if defined(CONFIG_FIT)

2
common/cmd_bdinfo.c
View File

@ -444,6 +444,6 @@ static void print_str(const char *name, const char *str)
U_BOOT_CMD( U_BOOT_CMD(
bdinfo, 1, 1, do_bdinfo, bdinfo, 1, 1, do_bdinfo,
"bdinfo - print Board Info structure\n", "print Board Info structure",
NULL NULL
); );

16
common/cmd_bedbug.c
View File

@ -107,7 +107,7 @@ int do_bedbug_dis (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_dis */ } /* do_bedbug_dis */
U_BOOT_CMD (ds, 3, 1, do_bedbug_dis, U_BOOT_CMD (ds, 3, 1, do_bedbug_dis,
"ds - disassemble memory\n", "disassemble memory",
"ds <address> [# instructions]\n"); "ds <address> [# instructions]\n");
/* ====================================================================== /* ======================================================================
@ -160,7 +160,7 @@ int do_bedbug_asm (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_asm */ } /* do_bedbug_asm */
U_BOOT_CMD (as, 2, 0, do_bedbug_asm, U_BOOT_CMD (as, 2, 0, do_bedbug_asm,
"as - assemble memory\n", "as <address>\n"); "assemble memory", "as <address>\n");
/* ====================================================================== /* ======================================================================
* Used to set a break point from the interpreter. Simply calls into the * Used to set a break point from the interpreter. Simply calls into the
@ -177,7 +177,7 @@ int do_bedbug_break (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_break */ } /* do_bedbug_break */
U_BOOT_CMD (break, 3, 0, do_bedbug_break, U_BOOT_CMD (break, 3, 0, do_bedbug_break,
"break - set or clear a breakpoint\n", "set or clear a breakpoint",
" - Set or clear a breakpoint\n" " - Set or clear a breakpoint\n"
"break <address> - Break at an address\n" "break <address> - Break at an address\n"
"break off <bp#> - Disable breakpoint.\n" "break off <bp#> - Disable breakpoint.\n"
@ -277,7 +277,7 @@ int do_bedbug_continue (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_continue */ } /* do_bedbug_continue */
U_BOOT_CMD (continue, 1, 0, do_bedbug_continue, U_BOOT_CMD (continue, 1, 0, do_bedbug_continue,
"continue- continue from a breakpoint\n", "continue from a breakpoint",
" - continue from a breakpoint.\n"); " - continue from a breakpoint.\n");
/* ====================================================================== /* ======================================================================
@ -308,7 +308,7 @@ int do_bedbug_step (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_step */ } /* do_bedbug_step */
U_BOOT_CMD (step, 1, 1, do_bedbug_step, U_BOOT_CMD (step, 1, 1, do_bedbug_step,
"step - single step execution.\n", "single step execution.",
" - single step execution.\n"); " - single step execution.\n");
/* ====================================================================== /* ======================================================================
@ -339,7 +339,7 @@ int do_bedbug_next (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_next */ } /* do_bedbug_next */
U_BOOT_CMD (next, 1, 1, do_bedbug_next, U_BOOT_CMD (next, 1, 1, do_bedbug_next,
"next - single step execution, stepping over subroutines.\n", "single step execution, stepping over subroutines.",
" - single step execution, stepping over subroutines.\n"); " - single step execution, stepping over subroutines.\n");
/* ====================================================================== /* ======================================================================
@ -384,7 +384,7 @@ int do_bedbug_stack (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_stack */ } /* do_bedbug_stack */
U_BOOT_CMD (where, 1, 1, do_bedbug_stack, U_BOOT_CMD (where, 1, 1, do_bedbug_stack,
"where - Print the running stack.\n", "Print the running stack.",
" - Print the running stack.\n"); " - Print the running stack.\n");
/* ====================================================================== /* ======================================================================
@ -405,7 +405,7 @@ int do_bedbug_rdump (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
} /* do_bedbug_rdump */ } /* do_bedbug_rdump */
U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump, U_BOOT_CMD (rdump, 1, 1, do_bedbug_rdump,
"rdump - Show registers.\n", " - Show registers.\n"); "Show registers.", " - Show registers.\n");
/* ====================================================================== */ /* ====================================================================== */

2
common/cmd_bmp.c
View File

@ -139,7 +139,7 @@ int do_bmp(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
bmp, 5, 1, do_bmp, bmp, 5, 1, do_bmp,
"bmp - manipulate BMP image data\n", "manipulate BMP image data",
"info <imageAddr> - display image info\n" "info <imageAddr> - display image info\n"
"bmp display <imageAddr> [x y] - display image at x,y\n" "bmp display <imageAddr> [x y] - display image at x,y\n"
); );

4
common/cmd_boot.c
View File

@ -64,7 +64,7 @@ int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
go, CONFIG_SYS_MAXARGS, 1, do_go, go, CONFIG_SYS_MAXARGS, 1, do_go,
"go - start application at address 'addr'\n", "start application at address 'addr'",
"addr [arg ...]\n - start application at address 'addr'\n" "addr [arg ...]\n - start application at address 'addr'\n"
" passing 'arg' as arguments\n" " passing 'arg' as arguments\n"
); );
@ -73,6 +73,6 @@ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
U_BOOT_CMD( U_BOOT_CMD(
reset, 1, 0, do_reset, reset, 1, 0, do_reset,
"reset - Perform RESET of the CPU\n", "Perform RESET of the CPU",
NULL NULL
); );

2
common/cmd_bootldr.c
View File

@ -59,6 +59,6 @@ int do_bootldr(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(bootldr, 2, 0, do_bootldr, U_BOOT_CMD(bootldr, 2, 0, do_bootldr,
"bootldr - boot ldr image from memory\n", "boot ldr image from memory",
"[addr]\n" "[addr]\n"
" - boot ldr image stored in memory\n"); " - boot ldr image stored in memory\n");

10
common/cmd_bootm.c
View File

@ -913,7 +913,7 @@ static void *boot_get_kernel (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]
U_BOOT_CMD( U_BOOT_CMD(
bootm, CONFIG_SYS_MAXARGS, 1, do_bootm, bootm, CONFIG_SYS_MAXARGS, 1, do_bootm,
"bootm - boot application image from memory\n", "boot application image from memory",
"[addr [arg ...]]\n - boot application image stored in memory\n" "[addr [arg ...]]\n - boot application image stored in memory\n"
"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n" "\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
"\t'arg' can be the address of an initrd image\n" "\t'arg' can be the address of an initrd image\n"
@ -970,14 +970,14 @@ int do_bootd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
boot, 1, 1, do_bootd, boot, 1, 1, do_bootd,
"boot - boot default, i.e., run 'bootcmd'\n", "boot default, i.e., run 'bootcmd'",
NULL NULL
); );
/* keep old command name "bootd" for backward compatibility */ /* keep old command name "bootd" for backward compatibility */
U_BOOT_CMD( U_BOOT_CMD(
bootd, 1, 1, do_bootd, bootd, 1, 1, do_bootd,
"bootd - boot default, i.e., run 'bootcmd'\n", "boot default, i.e., run 'bootcmd'",
NULL NULL
); );
@ -1062,7 +1062,7 @@ static int image_info (ulong addr)
U_BOOT_CMD( U_BOOT_CMD(
iminfo, CONFIG_SYS_MAXARGS, 1, do_iminfo, iminfo, CONFIG_SYS_MAXARGS, 1, do_iminfo,
"iminfo - print header information for application image\n", "print header information for application image",
"addr [addr ...]\n" "addr [addr ...]\n"
" - print header information for application image starting at\n" " - print header information for application image starting at\n"
" address 'addr' in memory; this includes verification of the\n" " address 'addr' in memory; this includes verification of the\n"
@ -1130,7 +1130,7 @@ next_bank: ;
U_BOOT_CMD( U_BOOT_CMD(
imls, 1, 1, do_imls, imls, 1, 1, do_imls,
"imls - list all images found in flash\n", "list all images found in flash",
"\n" "\n"
" - Prints information about all images found at sector\n" " - Prints information about all images found at sector\n"
" boundaries in flash.\n" " boundaries in flash.\n"

4
common/cmd_cache.c
View File

@ -97,14 +97,14 @@ static int on_off (const char *s)
U_BOOT_CMD( U_BOOT_CMD(
icache, 2, 1, do_icache, icache, 2, 1, do_icache,
"icache - enable or disable instruction cache\n", "enable or disable instruction cache",
"[on, off]\n" "[on, off]\n"
" - enable or disable instruction cache\n" " - enable or disable instruction cache\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
dcache, 2, 1, do_dcache, dcache, 2, 1, do_dcache,
"dcache - enable or disable data cache\n", "enable or disable data cache",
"[on, off]\n" "[on, off]\n"
" - enable or disable data (writethrough) cache\n" " - enable or disable data (writethrough) cache\n"
); );

2
common/cmd_console.c
View File

@ -65,6 +65,6 @@ int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
coninfo, 3, 1, do_coninfo, coninfo, 3, 1, do_coninfo,
"coninfo - print console devices and information\n", "print console devices and information",
"" ""
); );

2
common/cmd_cplbinfo.c
View File

@ -54,6 +54,6 @@ int do_cplbinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
} }
U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo, U_BOOT_CMD(cplbinfo, 1, 0, do_cplbinfo,
"cplbinfo- display current CPLB tables\n", "display current CPLB tables",
"\n" "\n"
" - display current CPLB tables\n"); " - display current CPLB tables\n");

2
common/cmd_date.c
View File

@ -214,7 +214,7 @@ int mk_date (char *datestr, struct rtc_time *tmp)
U_BOOT_CMD( U_BOOT_CMD(
date, 2, 1, do_date, date, 2, 1, do_date,
"date - get/set/reset date & time\n", "get/set/reset date & time",
"[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n" "[MMDDhhmm[[CC]YY][.ss]]\ndate reset\n"
" - without arguments: print date & time\n" " - without arguments: print date & time\n"
" - with numeric argument: set the system date & time\n" " - with numeric argument: set the system date & time\n"

8
common/cmd_dcr.c
View File

@ -223,23 +223,23 @@ int do_setidcr (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
getdcr, 2, 1, do_getdcr, getdcr, 2, 1, do_getdcr,
"getdcr - Get an AMCC PPC 4xx DCR's value\n", "Get an AMCC PPC 4xx DCR's value",
"dcrn - return a DCR's value.\n" "dcrn - return a DCR's value.\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
setdcr, 2, 1, do_setdcr, setdcr, 2, 1, do_setdcr,
"setdcr - Set an AMCC PPC 4xx DCR's value\n", "Set an AMCC PPC 4xx DCR's value",
"dcrn - set a DCR's value.\n" "dcrn - set a DCR's value.\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
getidcr, 3, 1, do_getidcr, getidcr, 3, 1, do_getidcr,
"getidcr - Get a register value via indirect DCR addressing\n", "Get a register value via indirect DCR addressing",
"adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n" "adr_dcrn[.dat_dcrn] offset - write offset to adr_dcrn, read value from dat_dcrn.\n"
); );
U_BOOT_CMD( U_BOOT_CMD(
setidcr, 4, 1, do_setidcr, setidcr, 4, 1, do_setidcr,
"setidcr - Set a register value via indirect DCR addressing\n", "Set a register value via indirect DCR addressing",
"adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n" "adr_dcrn[.dat_dcrn] offset value - write offset to adr_dcrn, write value to dat_dcrn.\n"
); );

2
common/cmd_df.c
View File

@ -33,5 +33,5 @@ usage:
U_BOOT_CMD( U_BOOT_CMD(
sf, 2, 1, do_serial_flash, sf, 2, 1, do_serial_flash,
"sf - Serial flash sub-system\n", "Serial flash sub-system",
"probe [bus:]cs - init flash device on given SPI bus and CS\n") "probe [bus:]cs - init flash device on given SPI bus and CS\n")

2
common/cmd_diag.c
View File

@ -66,7 +66,7 @@ int do_diag (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
U_BOOT_CMD( U_BOOT_CMD(
diag, CONFIG_SYS_MAXARGS, 0, do_diag, diag, CONFIG_SYS_MAXARGS, 0, do_diag,
"diag - perform board diagnostics\n", "perform board diagnostics",
" - print list of available tests\n" " - print list of available tests\n"
"diag [test1 [test2]]\n" "diag [test1 [test2]]\n"
" - print information about specified tests\n" " - print information about specified tests\n"

Some files were not shown because too many files have changed in this diff Show More