arm: socfpga: gen5: sync devicetrees to Linux

This is again a sync to linux-next + pending patches in Dinh's tree at
commit 1c909b2dfe6a ("ARM: dts: socfpga: update more missing reset
properties")'

It adds missing peripheral reset properties to socfpga.dtsi and removes
U-Boot specific leftovers from socfpga_cyclone5_socrates.dts.

Signed-off-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>

arch/arm/dts/socfpga.dtsi

@@ -84,6 +84,7 @@
 				#dma-requests = <32>;
 				clocks = <&l4_main_clk>;
 				clock-names = "apb_pclk";
+				resets = <&rst DMA_RESET>;
 			};
 		};
 
@@ -100,6 +101,7 @@
 			reg = <0xffc00000 0x1000>;
 			interrupts = <0 131 4>, <0 132 4>, <0 133 4>, <0 134 4>;
 			clocks = <&can0_clk>;
+			resets = <&rst CAN0_RESET>;
 			status = "disabled";
 		};
 
@@ -108,6 +110,7 @@
 			reg = <0xffc01000 0x1000>;
 			interrupts = <0 135 4>, <0 136 4>, <0 137 4>, <0 138 4>;
 			clocks = <&can1_clk>;
+			resets = <&rst CAN1_RESET>;
 			status = "disabled";
 		};
 
@@ -585,6 +588,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff708000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO0_RESET>;
 			status = "disabled";
 
 			porta: gpio-controller@0 {
@@ -605,6 +609,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff709000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO1_RESET>;
 			status = "disabled";
 
 			portb: gpio-controller@0 {
@@ -625,6 +630,7 @@
 			compatible = "snps,dw-apb-gpio";
 			reg = <0xff70a000 0x1000>;
 			clocks = <&l4_mp_clk>;
+			resets = <&rst GPIO2_RESET>;
 			status = "disabled";
 
 			portc: gpio-controller@0 {
@@ -735,6 +741,7 @@
 			#size-cells = <0>;
 			clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
 			clock-names = "biu", "ciu";
+			resets = <&rst SDMMC_RESET>;
 			status = "disabled";
 		};
 
@@ -746,9 +753,9 @@
 			      <0xffb80000 0x10000>;
 			reg-names = "nand_data", "denali_reg";
 			interrupts = <0x0 0x90 0x4>;
-			dma-mask = <0xffffffff>;
 			clocks = <&nand_clk>, <&nand_x_clk>, <&nand_ecc_clk>;
 			clock-names = "nand", "nand_x", "ecc";
+			resets = <&rst NAND_RESET>;
 			status = "disabled";
 		};
 
@@ -759,7 +766,7 @@
 
 		qspi: spi@ff705000 {
 			compatible = "cdns,qspi-nor";
-                        #address-cells = <1>;
+			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0xff705000 0x1000>,
 			      <0xffa00000 0x1000>;
@@ -768,6 +775,7 @@
 			cdns,fifo-width = <4>;
 			cdns,trigger-address = <0x00000000>;
 			clocks = <&qspi_clk>;
+			resets = <&rst QSPI_RESET>;
 			status = "disabled";
 		};
 
@@ -786,6 +794,7 @@
 		sdr: sdr@ffc25000 {
 			compatible = "altr,sdr-ctl", "syscon";
 			reg = <0xffc25000 0x1000>;
+			resets = <&rst SDR_RESET>;
 		};
 
 		sdramedac {
@@ -802,6 +811,7 @@
 			interrupts = <0 154 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM0_RESET>;
 			status = "disabled";
 		};
 
@@ -813,6 +823,7 @@
 			interrupts = <0 155 4>;
 			num-cs = <4>;
 			clocks = <&spi_m_clk>;
+			resets = <&rst SPIM1_RESET>;
 			status = "disabled";
 		};
 
@@ -879,6 +890,7 @@
 			dmas = <&pdma 28>,
 			       <&pdma 29>;
 			dma-names = "tx", "rx";
+			resets = <&rst UART0_RESET>;
 		};
 
 		uart1: serial1@ffc03000 {
@@ -891,6 +903,7 @@
 			dmas = <&pdma 30>,
 			       <&pdma 31>;
 			dma-names = "tx", "rx";
+			resets = <&rst UART1_RESET>;
 		};
 
 		usbphy0: usbphy {
@@ -930,6 +943,7 @@
 			reg = <0xffd02000 0x1000>;
 			interrupts = <0 171 4>;
 			clocks = <&osc1>;
+			resets = <&rst L4WD0_RESET>;
 			status = "disabled";
 		};
 
@@ -938,6 +952,7 @@
 			reg = <0xffd03000 0x1000>;
 			interrupts = <0 172 4>;
 			clocks = <&osc1>;
+			resets = <&rst L4WD1_RESET>;
 			status = "disabled";
 		};
 	};

arch/arm/dts/socfpga_cyclone5_socrates.dts

@@ -76,7 +76,6 @@
 
 &qspi {
 	status = "okay";
-	u-boot,dm-pre-reloc;
 
 	flash: flash@0 {
 		#address-cells = <1>;
@@ -91,6 +90,5 @@
 		cdns,tchsh-ns = <4>;
 		cdns,tslch-ns = <4>;
 		status = "okay";
-		u-boot,dm-pre-reloc;
 	};
 };