warp7: Add initial support
Add the basic support for Warp7 board. For more information about this reference design, please visit: https://www.element14.com/community/docs/DOC-79058/l/warp-7-the-next-generation-wearable-reference-platform Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com>
This commit is contained in:
Fabio Estevam
Stefano Babic
parent
227c59a856
commit
47173483a3
|
|
@ -18,11 +18,18 @@ config TARGET_MX7DSABRESD
|
||||||
select DM
|
select DM
|
||||||
select DM_THERMAL
|
select DM_THERMAL
|
||||||
|
|
||||||
|
config TARGET_WARP7
|
||||||
|
bool "warp7"
|
||||||
|
select MX7D
|
||||||
|
select DM
|
||||||
|
select DM_THERMAL
|
||||||
|
|
||||||
endchoice
|
endchoice
|
||||||
|
|
||||||
config SYS_SOC
|
config SYS_SOC
|
||||||
default "mx7"
|
default "mx7"
|
||||||
|
|
||||||
source "board/freescale/mx7dsabresd/Kconfig"
|
source "board/freescale/mx7dsabresd/Kconfig"
|
||||||
|
source "board/warp7/Kconfig"
|
||||||
|
|
||||||
endif
|
endif
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,9 @@
|
||||||
|
if TARGET_WARP7
|
||||||
|
|
||||||
|
config SYS_BOARD
|
||||||
|
default "warp7"
|
||||||
|
|
||||||
|
config SYS_CONFIG_NAME
|
||||||
|
default "warp7"
|
||||||
|
|
||||||
|
endif
|
||||||
|
|
@ -0,0 +1,6 @@
|
||||||
|
WARP7 BOARD
|
||||||
|
M: Fabio Estevam <fabio.estevam@nxp.com>
|
||||||
|
S: Maintained
|
||||||
|
F: board/warp7/
|
||||||
|
F: include/configs/warp7.h
|
||||||
|
F: configs/warp7_defconfig
|
||||||
|
|
@ -0,0 +1,6 @@
|
||||||
|
# (C) Copyright 2016 NXP Semiconductors
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
|
||||||
|
obj-y := warp7.o
|
||||||
|
|
@ -0,0 +1,95 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2016 NXP Semiconductors
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0
|
||||||
|
*
|
||||||
|
* Refer docs/README.imxmage for more details about how-to configure
|
||||||
|
* and create imximage boot image
|
||||||
|
*
|
||||||
|
* The syntax is taken as close as possible with the kwbimage
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define __ASSEMBLY__
|
||||||
|
#include <config.h>
|
||||||
|
|
||||||
|
IMAGE_VERSION 2
|
||||||
|
BOOT_FROM sd
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Device Configuration Data (DCD)
|
||||||
|
*
|
||||||
|
* Each entry must have the format:
|
||||||
|
* Addr-type Address Value
|
||||||
|
*
|
||||||
|
* where:
|
||||||
|
* Addr-type register length (1,2 or 4 bytes)
|
||||||
|
* Address absolute address of the register
|
||||||
|
* value value to be stored in the register
|
||||||
|
*/
|
||||||
|
|
||||||
|
DATA 4 0x30340004 0x4F400005
|
||||||
|
|
||||||
|
DATA 4 0x30391000 0x00000002
|
||||||
|
DATA 4 0x307a0000 0x03040008
|
||||||
|
DATA 4 0x307a0064 0x00200038
|
||||||
|
DATA 4 0x307a0490 0x00000001
|
||||||
|
DATA 4 0x307a00d0 0x00350001
|
||||||
|
DATA 4 0x307a00dc 0x00c3000a
|
||||||
|
DATA 4 0x307a00e0 0x00010000
|
||||||
|
DATA 4 0x307a00e4 0x00110006
|
||||||
|
DATA 4 0x307a00f4 0x0000033f
|
||||||
|
DATA 4 0x307a0100 0x0a0e110b
|
||||||
|
DATA 4 0x307a0104 0x00020211
|
||||||
|
DATA 4 0x307a0108 0x03060708
|
||||||
|
DATA 4 0x307a010c 0x00a0500c
|
||||||
|
DATA 4 0x307a0110 0x05020307
|
||||||
|
DATA 4 0x307a0114 0x02020404
|
||||||
|
DATA 4 0x307a0118 0x02020003
|
||||||
|
DATA 4 0x307a011c 0x00000202
|
||||||
|
DATA 4 0x307a0120 0x00000202
|
||||||
|
|
||||||
|
DATA 4 0x307a0180 0x00600018
|
||||||
|
DATA 4 0x307a0184 0x00e00100
|
||||||
|
DATA 4 0x307a0190 0x02098205
|
||||||
|
DATA 4 0x307a0194 0x00060303
|
||||||
|
DATA 4 0x307a01a0 0x80400003
|
||||||
|
DATA 4 0x307a01a4 0x00100020
|
||||||
|
DATA 4 0x307a01a8 0x80100004
|
||||||
|
|
||||||
|
DATA 4 0x307a0200 0x00000015
|
||||||
|
DATA 4 0x307a0204 0x00161616
|
||||||
|
DATA 4 0x307a0210 0x00000f0f
|
||||||
|
DATA 4 0x307a0214 0x04040404
|
||||||
|
DATA 4 0x307a0218 0x0f0f0404
|
||||||
|
|
||||||
|
DATA 4 0x307a0240 0x06000600
|
||||||
|
DATA 4 0x307a0244 0x00000000
|
||||||
|
DATA 4 0x30391000 0x00000000
|
||||||
|
DATA 4 0x30790000 0x17421e40
|
||||||
|
DATA 4 0x30790004 0x10210100
|
||||||
|
DATA 4 0x30790008 0x00010000
|
||||||
|
DATA 4 0x30790010 0x0007080c
|
||||||
|
DATA 4 0x307900b0 0x1010007e
|
||||||
|
|
||||||
|
DATA 4 0x3079001C 0x01010000
|
||||||
|
DATA 4 0x3079009c 0x00000d6e
|
||||||
|
|
||||||
|
DATA 4 0x30790030 0x06060606
|
||||||
|
DATA 4 0x30790020 0x0a0a0a0a
|
||||||
|
DATA 4 0x30790050 0x01000008
|
||||||
|
DATA 4 0x30790050 0x00000008
|
||||||
|
DATA 4 0x30790018 0x0000000f
|
||||||
|
DATA 4 0x307900c0 0x0e487304
|
||||||
|
DATA 4 0x307900c0 0x0e4c7304
|
||||||
|
DATA 4 0x307900c0 0x0e4c7306
|
||||||
|
DATA 4 0x307900c0 0x0e4c7304
|
||||||
|
|
||||||
|
CHECK_BITS_SET 4 0x307900c4 0x1
|
||||||
|
|
||||||
|
DATA 4 0x307900c0 0x0e487304
|
||||||
|
|
||||||
|
DATA 4 0x30384130 0x00000000
|
||||||
|
DATA 4 0x30340020 0x00000178
|
||||||
|
DATA 4 0x30384130 0x00000002
|
||||||
|
|
||||||
|
CHECK_BITS_SET 4 0x307a0004 0x1
|
||||||
|
|
@ -0,0 +1,102 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2016 NXP Semiconductors
|
||||||
|
* Author: Fabio Estevam <fabio.estevam@nxp.com>
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <asm/arch/clock.h>
|
||||||
|
#include <asm/arch/imx-regs.h>
|
||||||
|
#include <asm/arch/mx7-pins.h>
|
||||||
|
#include <asm/arch/sys_proto.h>
|
||||||
|
#include <asm/gpio.h>
|
||||||
|
#include <asm/imx-common/iomux-v3.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <common.h>
|
||||||
|
#include <fsl_esdhc.h>
|
||||||
|
#include <mmc.h>
|
||||||
|
#include <asm/arch/crm_regs.h>
|
||||||
|
#include <usb.h>
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
#define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU100KOHM | \
|
||||||
|
PAD_CTL_HYS)
|
||||||
|
#define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \
|
||||||
|
PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM)
|
||||||
|
|
||||||
|
int dram_init(void)
|
||||||
|
{
|
||||||
|
gd->ram_size = PHYS_SDRAM_SIZE;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static iomux_v3_cfg_t const uart1_pads[] = {
|
||||||
|
MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static iomux_v3_cfg_t const usdhc3_pads[] = {
|
||||||
|
MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX7D_PAD_SD3_RESET_B__SD3_RESET_B | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void setup_iomux_uart(void)
|
||||||
|
{
|
||||||
|
imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct fsl_esdhc_cfg usdhc_cfg[1] = {
|
||||||
|
{USDHC3_BASE_ADDR},
|
||||||
|
};
|
||||||
|
|
||||||
|
int board_mmc_getcd(struct mmc *mmc)
|
||||||
|
{
|
||||||
|
/* Assume uSDHC3 emmc is always present */
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_mmc_init(bd_t *bis)
|
||||||
|
{
|
||||||
|
imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
|
||||||
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
||||||
|
|
||||||
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_early_init_f(void)
|
||||||
|
{
|
||||||
|
setup_iomux_uart();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
/* address of boot parameters */
|
||||||
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int checkboard(void)
|
||||||
|
{
|
||||||
|
puts("Board: WARP7\n");
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_usb_phy_mode(int port)
|
||||||
|
{
|
||||||
|
return USB_INIT_DEVICE;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,12 @@
|
||||||
|
CONFIG_ARM=y
|
||||||
|
CONFIG_ARCH_MX7=y
|
||||||
|
CONFIG_TARGET_WARP7=y
|
||||||
|
CONFIG_IMX_RDC=y
|
||||||
|
CONFIG_IMX_BOOTAUX=y
|
||||||
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/warp7/imximage.cfg"
|
||||||
|
# CONFIG_CMD_BOOTD is not set
|
||||||
|
# CONFIG_CMD_IMI is not set
|
||||||
|
# CONFIG_CMD_IMLS is not set
|
||||||
|
# CONFIG_CMD_XIMG is not set
|
||||||
|
CONFIG_CMD_GPIO=y
|
||||||
|
# CONFIG_CMD_SETEXPR is not set
|
||||||
|
|
@ -0,0 +1,149 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2016 NXP Semiconductors
|
||||||
|
*
|
||||||
|
* Configuration settings for the i.MX7S Warp board.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __WARP7_CONFIG_H
|
||||||
|
#define __WARP7_CONFIG_H
|
||||||
|
|
||||||
|
#define CONFIG_BOOTDELAY 1
|
||||||
|
#include "mx7_common.h"
|
||||||
|
|
||||||
|
#define PHYS_SDRAM_SIZE SZ_512M
|
||||||
|
|
||||||
|
#define CONFIG_BOARD_EARLY_INIT_F
|
||||||
|
|
||||||
|
/* MMC Config*/
|
||||||
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
|
||||||
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
||||||
|
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
|
||||||
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
||||||
|
|
||||||
|
#define CONFIG_DFU_ENV_SETTINGS \
|
||||||
|
"dfu_alt_info=image raw 0 0x800000;"\
|
||||||
|
"u-boot raw 0 0x4000;"\
|
||||||
|
"bootimg part 0 1;"\
|
||||||
|
"rootfs part 0 2\0" \
|
||||||
|
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
CONFIG_DFU_ENV_SETTINGS \
|
||||||
|
"script=boot.scr\0" \
|
||||||
|
"image=zImage\0" \
|
||||||
|
"console=ttymxc0\0" \
|
||||||
|
"fdt_high=0xffffffff\0" \
|
||||||
|
"initrd_high=0xffffffff\0" \
|
||||||
|
"fdt_file=imx7d-warp.dtb\0" \
|
||||||
|
"fdt_addr=0x83000000\0" \
|
||||||
|
"boot_fdt=try\0" \
|
||||||
|
"ip_dyn=yes\0" \
|
||||||
|
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
||||||
|
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
||||||
|
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
||||||
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||||
|
"root=${mmcroot}\0" \
|
||||||
|
"loadbootscript=" \
|
||||||
|
"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
|
||||||
|
"bootscript=echo Running bootscript from mmc ...; " \
|
||||||
|
"source\0" \
|
||||||
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
||||||
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
||||||
|
"mmcboot=echo Booting from mmc ...; " \
|
||||||
|
"run mmcargs; " \
|
||||||
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
||||||
|
"if run loadfdt; then " \
|
||||||
|
"bootz ${loadaddr} - ${fdt_addr}; " \
|
||||||
|
"else " \
|
||||||
|
"if test ${boot_fdt} = try; then " \
|
||||||
|
"bootz; " \
|
||||||
|
"else " \
|
||||||
|
"echo WARN: Cannot load the DT; " \
|
||||||
|
"fi; " \
|
||||||
|
"fi; " \
|
||||||
|
"else " \
|
||||||
|
"bootz; " \
|
||||||
|
"fi;\0" \
|
||||||
|
|
||||||
|
#define CONFIG_BOOTCOMMAND \
|
||||||
|
"mmc dev ${mmcdev};" \
|
||||||
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
||||||
|
"if run loadbootscript; then " \
|
||||||
|
"run bootscript; " \
|
||||||
|
"else " \
|
||||||
|
"if run loadimage; then " \
|
||||||
|
"run mmcboot; " \
|
||||||
|
"fi; " \
|
||||||
|
"fi; " \
|
||||||
|
"fi"
|
||||||
|
|
||||||
|
#define CONFIG_CMD_MEMTEST
|
||||||
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||||
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
|
||||||
|
|
||||||
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||||
|
#define CONFIG_SYS_HZ 1000
|
||||||
|
|
||||||
|
#define CONFIG_STACKSIZE SZ_128K
|
||||||
|
|
||||||
|
/* Physical Memory Map */
|
||||||
|
#define CONFIG_NR_DRAM_BANKS 1
|
||||||
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||||
|
|
||||||
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||||
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||||
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||||
|
|
||||||
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||||
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||||
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||||
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||||
|
|
||||||
|
/* FLASH and environment organization */
|
||||||
|
#define CONFIG_SYS_NO_FLASH
|
||||||
|
#define CONFIG_ENV_SIZE SZ_8K
|
||||||
|
#define CONFIG_ENV_IS_IN_MMC
|
||||||
|
|
||||||
|
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
|
||||||
|
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
||||||
|
#define CONFIG_SYS_MMC_ENV_PART 0
|
||||||
|
#define CONFIG_MMCROOT "/dev/mmcblk2p2"
|
||||||
|
|
||||||
|
/* USB Configs */
|
||||||
|
#define CONFIG_CMD_USB
|
||||||
|
#define CONFIG_USB_EHCI
|
||||||
|
#define CONFIG_USB_EHCI_MX7
|
||||||
|
#define CONFIG_USB_STORAGE
|
||||||
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
||||||
|
|
||||||
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||||
|
#define CONFIG_MXC_USB_FLAGS 0
|
||||||
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
|
||||||
|
|
||||||
|
#define CONFIG_IMX_THERMAL
|
||||||
|
|
||||||
|
#define CONFIG_CI_UDC
|
||||||
|
#define CONFIG_USBD_HS
|
||||||
|
#define CONFIG_USB_GADGET_DUALSPEED
|
||||||
|
|
||||||
|
#define CONFIG_USB_GADGET
|
||||||
|
#define CONFIG_CMD_USB_MASS_STORAGE
|
||||||
|
#define CONFIG_USB_FUNCTION_MASS_STORAGE
|
||||||
|
#define CONFIG_USB_GADGET_DOWNLOAD
|
||||||
|
#define CONFIG_USB_GADGET_VBUS_DRAW 2
|
||||||
|
|
||||||
|
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
|
||||||
|
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
|
||||||
|
#define CONFIG_G_DNL_MANUFACTURER "FSL"
|
||||||
|
|
||||||
|
/* USB Device Firmware Update support */
|
||||||
|
#define CONFIG_CMD_DFU
|
||||||
|
#define CONFIG_USB_FUNCTION_DFU
|
||||||
|
#define CONFIG_DFU_MMC
|
||||||
|
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
|
||||||
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
||||||
|
|
||||||
|
#endif
|
||||||
Loading…
Reference in New Issue