ti814x: Remove platform
The TI814x (DM814x) platform is rather old and in need of a lot of migration work. As much of that work is well past the deadline, remove this platform. Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini
parent
9ccd840cca
commit
50b5326868
|
|
@ -181,7 +181,6 @@ source "board/BuR/brppt1/Kconfig"
|
||||||
source "board/siemens/draco/Kconfig"
|
source "board/siemens/draco/Kconfig"
|
||||||
source "board/siemens/pxm2/Kconfig"
|
source "board/siemens/pxm2/Kconfig"
|
||||||
source "board/siemens/rut/Kconfig"
|
source "board/siemens/rut/Kconfig"
|
||||||
source "board/ti/ti814x/Kconfig"
|
|
||||||
source "board/ti/ti816x/Kconfig"
|
source "board/ti/ti816x/Kconfig"
|
||||||
source "board/ti/am43xx/Kconfig"
|
source "board/ti/am43xx/Kconfig"
|
||||||
source "board/ti/am335x/Kconfig"
|
source "board/ti/am335x/Kconfig"
|
||||||
|
|
|
||||||
|
|
@ -1,15 +0,0 @@
|
||||||
if TARGET_TI814X_EVM
|
|
||||||
|
|
||||||
config SYS_BOARD
|
|
||||||
default "ti814x"
|
|
||||||
|
|
||||||
config SYS_VENDOR
|
|
||||||
default "ti"
|
|
||||||
|
|
||||||
config SYS_SOC
|
|
||||||
default "am33xx"
|
|
||||||
|
|
||||||
config SYS_CONFIG_NAME
|
|
||||||
default "ti814x_evm"
|
|
||||||
|
|
||||||
endif
|
|
||||||
|
|
@ -1,6 +0,0 @@
|
||||||
TI814X BOARD
|
|
||||||
M: Tom Rini <trini@konsulko.com>
|
|
||||||
S: Maintained
|
|
||||||
F: board/ti/ti814x/
|
|
||||||
F: include/configs/ti814x_evm.h
|
|
||||||
F: configs/ti814x_evm_defconfig
|
|
||||||
|
|
@ -1,11 +0,0 @@
|
||||||
# SPDX-License-Identifier: GPL-2.0+
|
|
||||||
#
|
|
||||||
# Makefile
|
|
||||||
#
|
|
||||||
# Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
||||||
|
|
||||||
ifdef CONFIG_SPL_BUILD
|
|
||||||
obj-y := mux.o
|
|
||||||
endif
|
|
||||||
|
|
||||||
obj-y += evm.o
|
|
||||||
|
|
@ -1,190 +0,0 @@
|
||||||
// SPDX-License-Identifier: GPL-2.0+
|
|
||||||
/*
|
|
||||||
* evm.c
|
|
||||||
*
|
|
||||||
* Board functions for TI814x EVM
|
|
||||||
*
|
|
||||||
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <cpsw.h>
|
|
||||||
#include <env.h>
|
|
||||||
#include <errno.h>
|
|
||||||
#include <init.h>
|
|
||||||
#include <net.h>
|
|
||||||
#include <spl.h>
|
|
||||||
#include <asm/arch/cpu.h>
|
|
||||||
#include <asm/arch/hardware.h>
|
|
||||||
#include <asm/arch/omap.h>
|
|
||||||
#include <asm/arch/ddr_defs.h>
|
|
||||||
#include <asm/arch/clock.h>
|
|
||||||
#include <asm/arch/gpio.h>
|
|
||||||
#include <asm/arch/mmc_host_def.h>
|
|
||||||
#include <asm/arch/sys_proto.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <asm/emif.h>
|
|
||||||
#include <asm/gpio.h>
|
|
||||||
#include "evm.h"
|
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR;
|
|
||||||
|
|
||||||
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
||||||
|
|
||||||
/* UART Defines */
|
|
||||||
#ifdef CONFIG_SPL_BUILD
|
|
||||||
static const struct cmd_control evm_ddr2_cctrl_data = {
|
|
||||||
.cmd0csratio = 0x80,
|
|
||||||
.cmd0iclkout = 0x00,
|
|
||||||
|
|
||||||
.cmd1csratio = 0x80,
|
|
||||||
.cmd1iclkout = 0x00,
|
|
||||||
|
|
||||||
.cmd2csratio = 0x80,
|
|
||||||
.cmd2iclkout = 0x00,
|
|
||||||
};
|
|
||||||
|
|
||||||
static const struct emif_regs evm_ddr2_emif0_regs = {
|
|
||||||
.sdram_config = 0x40801ab2,
|
|
||||||
.ref_ctrl = 0x10000c30,
|
|
||||||
.sdram_tim1 = 0x0aaaf552,
|
|
||||||
.sdram_tim2 = 0x043631d2,
|
|
||||||
.sdram_tim3 = 0x00000327,
|
|
||||||
.emif_ddr_phy_ctlr_1 = 0x00000007
|
|
||||||
};
|
|
||||||
|
|
||||||
static const struct emif_regs evm_ddr2_emif1_regs = {
|
|
||||||
.sdram_config = 0x40801ab2,
|
|
||||||
.ref_ctrl = 0x10000c30,
|
|
||||||
.sdram_tim1 = 0x0aaaf552,
|
|
||||||
.sdram_tim2 = 0x043631d2,
|
|
||||||
.sdram_tim3 = 0x00000327,
|
|
||||||
.emif_ddr_phy_ctlr_1 = 0x00000007
|
|
||||||
};
|
|
||||||
|
|
||||||
const struct dmm_lisa_map_regs evm_lisa_map_regs = {
|
|
||||||
.dmm_lisa_map_0 = 0x00000000,
|
|
||||||
.dmm_lisa_map_1 = 0x00000000,
|
|
||||||
.dmm_lisa_map_2 = 0x806c0300,
|
|
||||||
.dmm_lisa_map_3 = 0x806c0300,
|
|
||||||
};
|
|
||||||
|
|
||||||
static const struct ddr_data evm_ddr2_data = {
|
|
||||||
.datardsratio0 = ((0x35<<10) | (0x35<<0)),
|
|
||||||
.datawdsratio0 = ((0x20<<10) | (0x20<<0)),
|
|
||||||
.datawiratio0 = ((0<<10) | (0<<0)),
|
|
||||||
.datagiratio0 = ((0<<10) | (0<<0)),
|
|
||||||
.datafwsratio0 = ((0x90<<10) | (0x90<<0)),
|
|
||||||
.datawrsratio0 = ((0x50<<10) | (0x50<<0)),
|
|
||||||
};
|
|
||||||
|
|
||||||
void set_uart_mux_conf(void)
|
|
||||||
{
|
|
||||||
/* Set UART pins */
|
|
||||||
enable_uart0_pin_mux();
|
|
||||||
}
|
|
||||||
|
|
||||||
void set_mux_conf_regs(void)
|
|
||||||
{
|
|
||||||
/* Set MMC pins */
|
|
||||||
enable_mmc1_pin_mux();
|
|
||||||
|
|
||||||
/* Set Ethernet pins */
|
|
||||||
enable_enet_pin_mux();
|
|
||||||
}
|
|
||||||
|
|
||||||
void sdram_init(void)
|
|
||||||
{
|
|
||||||
config_dmm(&evm_lisa_map_regs);
|
|
||||||
|
|
||||||
config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
|
|
||||||
&evm_ddr2_emif0_regs, 0);
|
|
||||||
config_ddr(0, NULL, &evm_ddr2_data, &evm_ddr2_cctrl_data,
|
|
||||||
&evm_ddr2_emif1_regs, 1);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Basic board specific setup. Pinmux has been handled already.
|
|
||||||
*/
|
|
||||||
int board_init(void)
|
|
||||||
{
|
|
||||||
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
#if defined(CONFIG_MMC)
|
|
||||||
int board_mmc_init(bd_t *bis)
|
|
||||||
{
|
|
||||||
omap_mmc_init(1, 0, 0, -1, -1);
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#ifdef CONFIG_DRIVER_TI_CPSW
|
|
||||||
static void cpsw_control(int enabled)
|
|
||||||
{
|
|
||||||
/* VTP can be added here */
|
|
||||||
|
|
||||||
return;
|
|
||||||
}
|
|
||||||
|
|
||||||
static struct cpsw_slave_data cpsw_slaves[] = {
|
|
||||||
{
|
|
||||||
.slave_reg_ofs = 0x50,
|
|
||||||
.sliver_reg_ofs = 0x700,
|
|
||||||
.phy_addr = 1,
|
|
||||||
},
|
|
||||||
{
|
|
||||||
.slave_reg_ofs = 0x90,
|
|
||||||
.sliver_reg_ofs = 0x740,
|
|
||||||
.phy_addr = 0,
|
|
||||||
},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct cpsw_platform_data cpsw_data = {
|
|
||||||
.mdio_base = CPSW_MDIO_BASE,
|
|
||||||
.cpsw_base = CPSW_BASE,
|
|
||||||
.mdio_div = 0xff,
|
|
||||||
.channels = 8,
|
|
||||||
.cpdma_reg_ofs = 0x100,
|
|
||||||
.slaves = 1,
|
|
||||||
.slave_data = cpsw_slaves,
|
|
||||||
.ale_reg_ofs = 0x600,
|
|
||||||
.ale_entries = 1024,
|
|
||||||
.host_port_reg_ofs = 0x28,
|
|
||||||
.hw_stats_reg_ofs = 0x400,
|
|
||||||
.bd_ram_ofs = 0x2000,
|
|
||||||
.mac_control = (1 << 5),
|
|
||||||
.control = cpsw_control,
|
|
||||||
.host_port_num = 0,
|
|
||||||
.version = CPSW_CTRL_VERSION_1,
|
|
||||||
};
|
|
||||||
#endif
|
|
||||||
|
|
||||||
int board_eth_init(bd_t *bis)
|
|
||||||
{
|
|
||||||
uint8_t mac_addr[6];
|
|
||||||
uint32_t mac_hi, mac_lo;
|
|
||||||
|
|
||||||
if (!eth_env_get_enetaddr("ethaddr", mac_addr)) {
|
|
||||||
printf("<ethaddr> not set. Reading from E-fuse\n");
|
|
||||||
/* try reading mac address from efuse */
|
|
||||||
mac_lo = readl(&cdev->macid0l);
|
|
||||||
mac_hi = readl(&cdev->macid0h);
|
|
||||||
mac_addr[0] = mac_hi & 0xFF;
|
|
||||||
mac_addr[1] = (mac_hi & 0xFF00) >> 8;
|
|
||||||
mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
|
|
||||||
mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
|
|
||||||
mac_addr[4] = mac_lo & 0xFF;
|
|
||||||
mac_addr[5] = (mac_lo & 0xFF00) >> 8;
|
|
||||||
|
|
||||||
if (is_valid_ethaddr(mac_addr))
|
|
||||||
eth_env_set_enetaddr("ethaddr", mac_addr);
|
|
||||||
else
|
|
||||||
printf("Unable to read MAC address. Set <ethaddr>\n");
|
|
||||||
}
|
|
||||||
|
|
||||||
return cpsw_register(&cpsw_data);
|
|
||||||
}
|
|
||||||
|
|
@ -1,8 +0,0 @@
|
||||||
#ifndef _EVM_H
|
|
||||||
#define _EVM_H
|
|
||||||
|
|
||||||
void enable_uart0_pin_mux(void);
|
|
||||||
void enable_mmc1_pin_mux(void);
|
|
||||||
void enable_enet_pin_mux(void);
|
|
||||||
|
|
||||||
#endif /* _EVM_H */
|
|
||||||
|
|
@ -1,86 +0,0 @@
|
||||||
/*
|
|
||||||
* mux.c
|
|
||||||
*
|
|
||||||
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
|
||||||
*
|
|
||||||
* This program is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License as
|
|
||||||
* published by the Free Software Foundation version 2.
|
|
||||||
*
|
|
||||||
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
|
||||||
* kind, whether express or implied; without even the implied warranty
|
|
||||||
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <asm/arch/sys_proto.h>
|
|
||||||
#include <asm/arch/hardware.h>
|
|
||||||
#include <asm/arch/mux.h>
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <i2c.h>
|
|
||||||
#include "evm.h"
|
|
||||||
|
|
||||||
static struct module_pin_mux uart0_pin_mux[] = {
|
|
||||||
{OFFSET(pincntl70), PULLUP_EN | MODE(0x01)}, /* UART0_RXD */
|
|
||||||
{OFFSET(pincntl71), PULLUP_EN | MODE(0x01)}, /* UART0_TXD */
|
|
||||||
{-1},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct module_pin_mux mmc1_pin_mux[] = {
|
|
||||||
{OFFSET(pincntl1), PULLUP_EN | MODE(0x01)}, /* SD1_CLK */
|
|
||||||
{OFFSET(pincntl2), PULLUP_EN | MODE(0x01)}, /* SD1_CMD */
|
|
||||||
{OFFSET(pincntl3), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[0] */
|
|
||||||
{OFFSET(pincntl4), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[1] */
|
|
||||||
{OFFSET(pincntl5), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[2] */
|
|
||||||
{OFFSET(pincntl6), PULLUP_EN | MODE(0x01)}, /* SD1_DAT[3] */
|
|
||||||
{OFFSET(pincntl74), PULLUP_EN | MODE(0x40)}, /* SD1_POW */
|
|
||||||
{OFFSET(pincntl75), MODE(0x40)}, /* SD1_SDWP */
|
|
||||||
{OFFSET(pincntl80), PULLUP_EN | MODE(0x02)}, /* SD1_SDCD */
|
|
||||||
{-1},
|
|
||||||
};
|
|
||||||
|
|
||||||
static struct module_pin_mux enet_pin_mux[] = {
|
|
||||||
{OFFSET(pincntl232), MODE(0x01)}, /* EMAC_RMREFCLK */
|
|
||||||
{OFFSET(pincntl233), PULLUP_EN | MODE(0x01)}, /* MDCLK */
|
|
||||||
{OFFSET(pincntl234), PULLUP_EN | MODE(0x01)}, /* MDIO */
|
|
||||||
{OFFSET(pincntl235), MODE(0x01)}, /* EMAC[0]_MTCLK */
|
|
||||||
{OFFSET(pincntl236), MODE(0x01)}, /* EMAC[0]_MCOL */
|
|
||||||
{OFFSET(pincntl237), MODE(0x01)}, /* EMAC[0]_MCRS */
|
|
||||||
{OFFSET(pincntl238), MODE(0x01)}, /* EMAC[0]_MRXER */
|
|
||||||
{OFFSET(pincntl239), MODE(0x01)}, /* EMAC[0]_MRCLK */
|
|
||||||
{OFFSET(pincntl240), MODE(0x01)}, /* EMAC[0]_MRXD[0] */
|
|
||||||
{OFFSET(pincntl241), MODE(0x01)}, /* EMAC[0]_MRXD[1] */
|
|
||||||
{OFFSET(pincntl242), MODE(0x01)}, /* EMAC[0]_MRXD[2] */
|
|
||||||
{OFFSET(pincntl243), MODE(0x01)}, /* EMAC[0]_MRXD[3] */
|
|
||||||
{OFFSET(pincntl244), MODE(0x01)}, /* EMAC[0]_MRXD[4] */
|
|
||||||
{OFFSET(pincntl245), MODE(0x01)}, /* EMAC[0]_MRXD[5] */
|
|
||||||
{OFFSET(pincntl246), MODE(0x01)}, /* EMAC[0]_MRXD[6] */
|
|
||||||
{OFFSET(pincntl247), MODE(0x01)}, /* EMAC[0]_MRXD[7] */
|
|
||||||
{OFFSET(pincntl248), MODE(0x01)}, /* EMAC[0]_MRXDV */
|
|
||||||
{OFFSET(pincntl249), MODE(0x01)}, /* EMAC[0]_GMTCLK */
|
|
||||||
{OFFSET(pincntl250), MODE(0x01)}, /* EMAC[0]_MTXD[0] */
|
|
||||||
{OFFSET(pincntl251), MODE(0x01)}, /* EMAC[0]_MTXD[1] */
|
|
||||||
{OFFSET(pincntl252), MODE(0x01)}, /* EMAC[0]_MTXD[2] */
|
|
||||||
{OFFSET(pincntl253), MODE(0x01)}, /* EMAC[0]_MTXD[3] */
|
|
||||||
{OFFSET(pincntl254), MODE(0x01)}, /* EMAC[0]_MTXD[4] */
|
|
||||||
{OFFSET(pincntl255), MODE(0x01)}, /* EMAC[0]_MTXD[5] */
|
|
||||||
{OFFSET(pincntl256), MODE(0x01)}, /* EMAC[0]_MTXD[6] */
|
|
||||||
{OFFSET(pincntl257), MODE(0x01)}, /* EMAC[0]_MTXD[7] */
|
|
||||||
{OFFSET(pincntl258), MODE(0x01)}, /* EMAC[0]_MTXEN */
|
|
||||||
};
|
|
||||||
|
|
||||||
void enable_uart0_pin_mux(void)
|
|
||||||
{
|
|
||||||
configure_module_pin_mux(uart0_pin_mux);
|
|
||||||
}
|
|
||||||
|
|
||||||
void enable_mmc1_pin_mux(void)
|
|
||||||
{
|
|
||||||
configure_module_pin_mux(mmc1_pin_mux);
|
|
||||||
}
|
|
||||||
|
|
||||||
void enable_enet_pin_mux(void)
|
|
||||||
{
|
|
||||||
configure_module_pin_mux(enet_pin_mux);
|
|
||||||
}
|
|
||||||
|
|
@ -1,46 +0,0 @@
|
||||||
CONFIG_ARM=y
|
|
||||||
CONFIG_ARCH_CPU_INIT=y
|
|
||||||
CONFIG_ARCH_OMAP2PLUS=y
|
|
||||||
CONFIG_SPL_GPIO_SUPPORT=y
|
|
||||||
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
||||||
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
||||||
CONFIG_TI814X=y
|
|
||||||
CONFIG_TARGET_TI814X_EVM=y
|
|
||||||
CONFIG_SPL_MMC_SUPPORT=y
|
|
||||||
CONFIG_SPL_SERIAL_SUPPORT=y
|
|
||||||
CONFIG_NR_DRAM_BANKS=1
|
|
||||||
CONFIG_SPL=y
|
|
||||||
CONFIG_SPL_FS_FAT=y
|
|
||||||
CONFIG_SPL_LIBDISK_SUPPORT=y
|
|
||||||
CONFIG_SPL_TEXT_BASE=0x40300000
|
|
||||||
CONFIG_ENV_VARS_UBOOT_CONFIG=y
|
|
||||||
CONFIG_BOOTDELAY=1
|
|
||||||
CONFIG_SYS_CONSOLE_INFO_QUIET=y
|
|
||||||
# CONFIG_MISC_INIT_R is not set
|
|
||||||
CONFIG_VERSION_VARIABLE=y
|
|
||||||
# CONFIG_DISPLAY_CPUINFO is not set
|
|
||||||
# CONFIG_DISPLAY_BOARDINFO is not set
|
|
||||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
|
|
||||||
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x300
|
|
||||||
CONFIG_SPL_YMODEM_SUPPORT=y
|
|
||||||
CONFIG_HUSH_PARSER=y
|
|
||||||
# CONFIG_CMDLINE_EDITING is not set
|
|
||||||
# CONFIG_AUTO_COMPLETE is not set
|
|
||||||
CONFIG_SYS_PROMPT="U-Boot# "
|
|
||||||
CONFIG_CMD_ASKENV=y
|
|
||||||
CONFIG_CMD_MMC=y
|
|
||||||
# CONFIG_CMD_SETEXPR is not set
|
|
||||||
CONFIG_CMD_DHCP=y
|
|
||||||
CONFIG_BOOTP_DNS2=y
|
|
||||||
CONFIG_CMD_MII=y
|
|
||||||
CONFIG_CMD_PING=y
|
|
||||||
CONFIG_CMD_EXT2=y
|
|
||||||
CONFIG_CMD_FAT=y
|
|
||||||
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
|
||||||
CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
|
|
||||||
CONFIG_MMC_OMAP_HS=y
|
|
||||||
CONFIG_PHY_ET1011C=y
|
|
||||||
CONFIG_MII=y
|
|
||||||
CONFIG_DRIVER_TI_CPSW=y
|
|
||||||
CONFIG_SYS_NS16550=y
|
|
||||||
CONFIG_OF_LIBFDT=y
|
|
||||||
Loading…
Reference in New Issue