netbird: add netbird version 2
Add the netbird version 2 configuration, this is the prototype release of the final NB800 product.
This commit is contained in:
Stefan Eichenberger
parent
ea6c758e46
commit
5590a82b6d
|
|
@ -382,6 +382,14 @@ config TARGET_AM335X_NETBIRD
|
||||||
select DM_SERIAL
|
select DM_SERIAL
|
||||||
select DM_GPIO
|
select DM_GPIO
|
||||||
|
|
||||||
|
config TARGET_AM335X_NETBIRD_V2
|
||||||
|
bool "Support am335x_netbird_v2"
|
||||||
|
select CPU_V7
|
||||||
|
select SUPPORT_SPL
|
||||||
|
select DM
|
||||||
|
select DM_SERIAL
|
||||||
|
select DM_GPIO
|
||||||
|
|
||||||
config TARGET_AM335X_SL50
|
config TARGET_AM335X_SL50
|
||||||
bool "Support am335x_sl50"
|
bool "Support am335x_sl50"
|
||||||
select CPU_V7
|
select CPU_V7
|
||||||
|
|
@ -879,6 +887,7 @@ source "board/imx31_phycore/Kconfig"
|
||||||
source "board/isee/igep0033/Kconfig"
|
source "board/isee/igep0033/Kconfig"
|
||||||
source "board/mpl/vcma9/Kconfig"
|
source "board/mpl/vcma9/Kconfig"
|
||||||
source "board/nm/netbird/Kconfig"
|
source "board/nm/netbird/Kconfig"
|
||||||
|
source "board/nm/netbird_v2/Kconfig"
|
||||||
source "board/olimex/mx23_olinuxino/Kconfig"
|
source "board/olimex/mx23_olinuxino/Kconfig"
|
||||||
source "board/phytec/pcm051/Kconfig"
|
source "board/phytec/pcm051/Kconfig"
|
||||||
source "board/phytec/pcm052/Kconfig"
|
source "board/phytec/pcm052/Kconfig"
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,26 @@
|
||||||
|
if TARGET_AM335X_NETBIRD_V2
|
||||||
|
|
||||||
|
config SYS_BOARD
|
||||||
|
default "netbird_v2"
|
||||||
|
|
||||||
|
config SYS_VENDOR
|
||||||
|
default "nm"
|
||||||
|
|
||||||
|
config SYS_SOC
|
||||||
|
default "am33xx"
|
||||||
|
|
||||||
|
config SYS_CONFIG_NAME
|
||||||
|
default "am335x_netbird_v2"
|
||||||
|
|
||||||
|
config CONS_INDEX
|
||||||
|
int "UART used for console"
|
||||||
|
range 1 6
|
||||||
|
default 2
|
||||||
|
help
|
||||||
|
The AM335x SoC has a total of 6 UARTs (UART0 to UART5 as referenced
|
||||||
|
in documentation, etc) available to it. Depending on your specific
|
||||||
|
board you may want something other than UART0 as for example the IDK
|
||||||
|
uses UART3 so enter 4 here.
|
||||||
|
|
||||||
|
endif
|
||||||
|
|
||||||
|
|
@ -0,0 +1,13 @@
|
||||||
|
#
|
||||||
|
# Makefile
|
||||||
|
#
|
||||||
|
# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),)
|
||||||
|
obj-y := mux.o
|
||||||
|
endif
|
||||||
|
|
||||||
|
obj-y += board.o bdparser.o board_descriptor.o
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,558 @@
|
||||||
|
#ifndef _BDPARSER_H
|
||||||
|
#define _BDPARSER_H
|
||||||
|
/******************************************************************************
|
||||||
|
* (c) COPYRIGHT 2009-2011 by NetModule AG, Switzerland. All rights reserved.
|
||||||
|
*
|
||||||
|
* The program(s) may only be used and/or copied with the written permission
|
||||||
|
* from NetModule AG or in accordance with the terms and conditions stipulated
|
||||||
|
* in the agreement contract under which the program(s) have been supplied.
|
||||||
|
*
|
||||||
|
* PACKAGE : Board descriptor
|
||||||
|
*
|
||||||
|
* ABSTRACT:
|
||||||
|
* This package implements board descriptor manipulation functions.
|
||||||
|
*
|
||||||
|
* HISTORY:
|
||||||
|
* Date Author Description
|
||||||
|
* 20091106 rb RFE-FB18392: created
|
||||||
|
* 20100119 rs Minor cleanup, tags defined
|
||||||
|
* 20100301 rs Tags redefined
|
||||||
|
* 20100302 sma RFE-FB18392: created (partition)
|
||||||
|
* 20100322 th Adaptation WinCE and Win32 (assert)
|
||||||
|
* Added get bd info (type and name for standard entries)
|
||||||
|
* Adjusted bd tags
|
||||||
|
* Added scan entries (init and get next)
|
||||||
|
* Added partition info (flags and types)
|
||||||
|
* Added uint64 and partition64
|
||||||
|
* Changed boolean value true (BD_TRUE to 1)
|
||||||
|
* 20110104 rs General code cleanup (style guide), added new tags/types
|
||||||
|
* Added bufLen parameter for BD_GetInfo()
|
||||||
|
* Fixed wrong sizeof type in GetPartition()
|
||||||
|
* Changed 64 bit type to "long long" from struct
|
||||||
|
* Added BD_VerifySha1Hmac() function
|
||||||
|
*****************************************************************************/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @file
|
||||||
|
* Board descriptor parser.
|
||||||
|
* Get() functions are implemented for all supported basis data types:
|
||||||
|
* - 8/16/32 bits unsigned integers
|
||||||
|
* - void
|
||||||
|
* - string
|
||||||
|
* - IPv4 addresses
|
||||||
|
* - Ethernet MAC addresses
|
||||||
|
*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
|
||||||
|
\mainpage
|
||||||
|
|
||||||
|
\section description Description
|
||||||
|
|
||||||
|
This is the generated documentation for the <b>Board Descriptor utilities</b>.
|
||||||
|
|
||||||
|
For more details see the Board Descriptor Design Description.
|
||||||
|
|
||||||
|
**/
|
||||||
|
|
||||||
|
/*--- component configuration ------------------------------------------------*/
|
||||||
|
|
||||||
|
/** Select a target or operating system (just one of course) **/
|
||||||
|
#undef BD_TARGET_WIN32
|
||||||
|
#undef BD_TARGET_WINCE
|
||||||
|
#define BD_TARGET_UBOOT
|
||||||
|
#undef BD_TARGET_LINUX
|
||||||
|
#undef BD_TARGET_VXWORKS
|
||||||
|
|
||||||
|
#undef BD_CONF_UNIT_TESTS /**< define this to include unit test functions */
|
||||||
|
|
||||||
|
#undef BD_CONF_WANT_ASSERT /**< define this to use assert functions */
|
||||||
|
|
||||||
|
#undef BD_CONF_HAS_HASH /**< set to include hash check functions in parser */
|
||||||
|
|
||||||
|
|
||||||
|
/** Define external hmac-sha1 function to use */
|
||||||
|
#ifdef BD_CONF_HAS_HASH
|
||||||
|
extern int hmac_sha1(const void* key, unsigned int keylen, const void* data, unsigned int dataLen, void* hash);
|
||||||
|
|
||||||
|
#define BD_SHA1_HASH_FUNC(key, keylen, data, dataLen, hash) \
|
||||||
|
hmac_sha1 (key, keylen, data, dataLen, hash)
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/** Define desired assert function */
|
||||||
|
#ifdef BD_CONF_WANT_ASSERT
|
||||||
|
#ifdef BD_TARGET_WINCE
|
||||||
|
#define BD_ASSERT(test) ASSERT(test)
|
||||||
|
#elif defined(BD_TARGET_WIN32) && !defined(_DEBUG)
|
||||||
|
/* Win32 Release build */
|
||||||
|
#include <stdio.h>
|
||||||
|
#include <stdlib.h>
|
||||||
|
#define BD_ASSERT(test) { if(!(test)) { printf("BD_ASSERT(%s)\n- file <%s>\n- line <%d>\n", #test, __FILE__, __LINE__ ); exit(1); } }
|
||||||
|
#elif defined(BD_TARGET_LINUX)
|
||||||
|
#include <linux/kernel.h>
|
||||||
|
#define BD_ASSERT(test) { if(!(test)) { printk(KERN_NOTICE "BD_ASSERT(%s) %s:%d\n", #test, __FILE__, __LINE__ ); } }
|
||||||
|
#else
|
||||||
|
#include <assert.h>
|
||||||
|
#define BD_ASSERT(test) assert(test)
|
||||||
|
#endif
|
||||||
|
#else
|
||||||
|
/* No assertions wanted */
|
||||||
|
#define BD_ASSERT(test) ((void) 0)
|
||||||
|
#endif /* BD_CONF_WANT_ASSERT */
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/*--- defines ----------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define BD_MAX_LENGTH (4096) /**< Maximum length of a board descriptor's payload */
|
||||||
|
#define BD_MAX_ENTRY_LEN (512) /**< Maximum length of a tag value */
|
||||||
|
#define BD_HEADER_LENGTH (8) /**< Header is 8 bytes long */
|
||||||
|
#define BD_MAX_PARTITION_NAME (16) /**< Name of partition is at most 16 chars long*/
|
||||||
|
|
||||||
|
|
||||||
|
/*--- types ------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Board Descriptor Tags
|
||||||
|
*/
|
||||||
|
typedef enum _BD_Tags
|
||||||
|
{
|
||||||
|
BD_End = 0, /**< "Void" -> End tag */
|
||||||
|
BD_Serial = 1, /**< "String" -> Serial number of the equipment */
|
||||||
|
BD_Production_Date = 2, /**< "Date" -> Production date of the board */
|
||||||
|
BD_Hw_Ver = 3, /**< "UInt8" -> Hardware version of the equipment (Major HW changes, potentionally SW relevant) */
|
||||||
|
BD_Hw_Rel = 4, /**< "UInt8" -> Hardware release of the equipment (Minor HW changes, not SW relevant) */
|
||||||
|
BD_Prod_Name = 5, /**< "String" -> Human readable product name */
|
||||||
|
BD_Prod_Variant = 6, /**< "UInt16" -> Product variant */
|
||||||
|
BD_Prod_Compatibility = 7, /**< "String" -> Product compatibility name */
|
||||||
|
|
||||||
|
BD_Eth_Mac = 8, /**< "MAC" -> MAC address of the ethernet interface */
|
||||||
|
BD_Ip_Addr = 9, /**< "IPV4" -> IP V4 address (0.0.0.0 = DHCP) */
|
||||||
|
BD_Ip_Netmask = 10, /**< "IPV4" -> IP V4 address mask */
|
||||||
|
BD_Ip_Gateway = 11, /**< "IPV4" -> IP V4 address of the default gateway */
|
||||||
|
|
||||||
|
BD_Usb_Device_Id = 12, /**< "UInt16" -> USB device ID */
|
||||||
|
BD_Usb_Vendor_Id = 13, /**< "UInt16" -> USB vendor ID */
|
||||||
|
|
||||||
|
BD_Ram_Size = 14, /**< "UInt32" -> Available RAM size in bytes */
|
||||||
|
BD_Ram_Size64 = 15, /**< "UInt64" -> Available RAM size in bytes */
|
||||||
|
BD_Flash_Size = 16, /**< "UInt32" -> Available flash size in bytes */
|
||||||
|
BD_Flash_Size64 = 17, /**< "UInt64" -> Available flash size in bytes */
|
||||||
|
BD_Eeeprom_Size = 18, /**< "UInt32" -> Available EEPROM size in bytes */
|
||||||
|
BD_Nv_Rram_Size = 19, /**< "UInt32" -> Available EEPROM size in bytes */
|
||||||
|
|
||||||
|
BD_Cpu_Base_Clk = 20, /**< "UInt32" -> Base clock of the CPU in Hz = external clock input */
|
||||||
|
BD_Cpu_Core_Clk = 21, /**< "UInt32" -> Core clock of the CPU in Hz */
|
||||||
|
BD_Cpu_Bus_Clk = 22, /**< "UInt32" -> Bus clock of the CPU in Hz */
|
||||||
|
BD_Ram_Clk = 23, /**< "UInt32" -> RAM clock in Hz */
|
||||||
|
|
||||||
|
BD_Partition = 24, /**< "Partition" -> Offset of 1st Uboot partition in the 1st flash device in bytes */
|
||||||
|
BD_Partition64 = 25, /**< "Partition64" -> Offset of 1st Uboot partition in the 1st flash device in bytes */
|
||||||
|
|
||||||
|
BD_Lcd_Type = 26, /**< "UInt16" -> LCD type -> 0 = not present (interpretation can be project specific) */
|
||||||
|
BD_Lcd_Backlight = 27, /**< "UInt8" -> LCD backlight setting (0 = off; 100=max) */
|
||||||
|
BD_Lcd_Contrast = 28, /**< "UInt8" -> LCD contrast setting (0 = min; 100=max) */
|
||||||
|
BD_Touch_Type = 29, /**< "UInt16" -> Touch Screen type --> 0 = not present/defined */
|
||||||
|
|
||||||
|
BD_Manufacturer_Id = 30, /**< "String" -> Manufacturer id of the produced equipment (i.e. barcode) */
|
||||||
|
BD_Hmac_Sha1_4 = 31, /**< "Hash" -> SHA1 HMAC with 4 byte result */
|
||||||
|
BD_Fpga_Info = 32, /**< "UInt32" -> FPGA type/location (0xTTPPRRRR TT=FPGA type, PP=Population location, RRRR=Reserved allways 0000) */
|
||||||
|
|
||||||
|
BD_Ui_Adapter_Type = 4096, /**< "UInt16" -> IV OG2 UI adapterboard type (0 = not present) */
|
||||||
|
|
||||||
|
/* project specific tags */
|
||||||
|
BD_BootPart = 32768, /**< "UInt8" */
|
||||||
|
|
||||||
|
BD_None_Type = 65535, /**< "Void" -> None */
|
||||||
|
}
|
||||||
|
BD_Tags;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Board Descriptor Tag Types
|
||||||
|
*/
|
||||||
|
typedef enum _BD_Type
|
||||||
|
{
|
||||||
|
BD_Type_End = 0x00000000,
|
||||||
|
BD_Type_Void = 0x00000001,
|
||||||
|
BD_Type_UInt8 = 0x00000002,
|
||||||
|
BD_Type_UInt16 = 0x00000003,
|
||||||
|
BD_Type_UInt32 = 0x00000004,
|
||||||
|
BD_Type_UInt64 = 0x00000005,
|
||||||
|
BD_Type_String = 0x00000010,
|
||||||
|
BD_Type_Date = 0x00000020,
|
||||||
|
BD_Type_MAC = 0x00000030,
|
||||||
|
BD_Type_IPV4 = 0x00000040,
|
||||||
|
BD_Type_Partition = 0x00000050,
|
||||||
|
BD_Type_Partition64 = 0x00000051,
|
||||||
|
BD_Type_HMAC = 0x00000060,
|
||||||
|
BD_Type_None = 0xFFFFFFFF,
|
||||||
|
}
|
||||||
|
BD_Type;
|
||||||
|
|
||||||
|
|
||||||
|
typedef unsigned int bd_uint_t; /**< Generic UInt */
|
||||||
|
typedef unsigned int bd_size_t; /**< Size type */
|
||||||
|
|
||||||
|
typedef unsigned char bd_uint8_t; /**< 8 Bit unsigned integer */
|
||||||
|
typedef unsigned short bd_uint16_t; /**< 16 Bit unsigned integer */
|
||||||
|
typedef unsigned int bd_uint32_t; /**< 32 Bit unsigned integer */
|
||||||
|
|
||||||
|
#if defined(BD_TARGET_WIN32) || defined (BD_TARGET_WINCE)
|
||||||
|
typedef unsigned __int64 bd_uint64_t; /**< 64 Bit unsigned integer */
|
||||||
|
#else
|
||||||
|
typedef unsigned long long bd_uint64_t; /**< 64 Bit unsigned integer */
|
||||||
|
#endif
|
||||||
|
|
||||||
|
typedef int bd_bool_t; /**< Boolean */
|
||||||
|
#define BD_FALSE 0 /**< Boolean FALSE */
|
||||||
|
#define BD_TRUE 1 /**< Boolean TRUE */
|
||||||
|
|
||||||
|
typedef struct _BD_Info
|
||||||
|
{
|
||||||
|
BD_Tags tag;
|
||||||
|
BD_Type type;
|
||||||
|
const char* pName;
|
||||||
|
}
|
||||||
|
BD_Info;
|
||||||
|
|
||||||
|
typedef struct _BD_Entry
|
||||||
|
{
|
||||||
|
bd_uint16_t tag; /**< Tag of entry */
|
||||||
|
bd_size_t len; /**< Length of entry */
|
||||||
|
bd_uint_t entry; /**< Number of entry */
|
||||||
|
const bd_uint8_t* pData; /**< Pointer to descriptor data of entry */
|
||||||
|
}
|
||||||
|
BD_Entry;
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Board Descriptor Context
|
||||||
|
*
|
||||||
|
* This structure is passed to all calls of a Board Descriptor function.
|
||||||
|
* It stores the required context information.
|
||||||
|
* The entries are solely used by the Board Descriptor functions.
|
||||||
|
* They must not be accessed by the user.
|
||||||
|
*/
|
||||||
|
typedef struct _BD_Context
|
||||||
|
{
|
||||||
|
bd_bool_t headerOk; /**< True if header check passed else false */
|
||||||
|
bd_bool_t initialized; /**< True if data imported (and checked) */
|
||||||
|
|
||||||
|
bd_uint_t size; /**< Size of descriptor data */
|
||||||
|
bd_uint_t entries; /**< Number of entries found */
|
||||||
|
|
||||||
|
bd_uint16_t checksum; /**< Payload checksum contained in the header */
|
||||||
|
const bd_uint8_t* pData; /**< Pointer to descriptor data (not header) */
|
||||||
|
const bd_uint8_t* pDataEnd; /**< Pointer to end of data */
|
||||||
|
}
|
||||||
|
BD_Context;
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Partition Flags
|
||||||
|
*/
|
||||||
|
typedef enum _BD_Partition_Flags
|
||||||
|
{
|
||||||
|
BD_Partition_Flags_None = 0x00, /**< No special flags */
|
||||||
|
BD_Partition_Flags_Active = 0x80, /**< Partition is active */
|
||||||
|
}
|
||||||
|
BD_Partition_Flags;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Partition Type
|
||||||
|
*/
|
||||||
|
typedef enum _BD_Partition_Type
|
||||||
|
{
|
||||||
|
BD_Partition_Type_Raw = 0, /**< Unspecified type */
|
||||||
|
BD_Partition_Type_Raw_BootLoader = 1, /**< Linear bootloader image */
|
||||||
|
BD_Partition_Type_Raw_BBT = 2, /**< Bad Block Table */
|
||||||
|
BD_Partition_Type_FS_YAFFS2 = 3, /**< YAFFS2 Partition */
|
||||||
|
BD_Partition_Type_FS_JFFS2 = 4, /**< JFFS2 Partition */
|
||||||
|
BD_Partition_Type_FS_FAT16 = 5, /**< FAT16 Partition */
|
||||||
|
BD_Partition_Type_FS_FAT32 = 6, /**< FAT32 Partition */
|
||||||
|
BD_Partition_Type_FS_EXFAT = 7, /**< EXFAT Partition */
|
||||||
|
|
||||||
|
BD_Partition_Type_Max = 8, /**< For error checks */
|
||||||
|
}
|
||||||
|
BD_Partition_Type;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Partition Options (Partition64 element only)
|
||||||
|
*/
|
||||||
|
typedef enum _BD_Partition_Options
|
||||||
|
{
|
||||||
|
BD_Partition_Opts_None = 0x00, /***< No special options */
|
||||||
|
BD_Partition_Opts_ReadOnly = 0x01, /***< Partition should be mounted read only */
|
||||||
|
BD_Partition_Opts_OS = 0x02, /***< Partition contains operating system (OS) */
|
||||||
|
}
|
||||||
|
BD_Partition_Options;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Board descriptor type to describe filesystem partitions
|
||||||
|
*
|
||||||
|
* The function BD_GetPartition will directly fill such a structure.
|
||||||
|
*/
|
||||||
|
typedef struct _BD_PartitionEntry
|
||||||
|
{
|
||||||
|
BD_Partition_Flags flags;
|
||||||
|
BD_Partition_Type type;
|
||||||
|
bd_uint32_t offset;
|
||||||
|
bd_uint32_t size;
|
||||||
|
char name[BD_MAX_PARTITION_NAME+1];
|
||||||
|
}
|
||||||
|
BD_PartitionEntry;
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Board descriptor type to describe filesystem partitions
|
||||||
|
*
|
||||||
|
* Extended version with 64 bit addresses and options field.
|
||||||
|
* The function BD_GetPartition64 will directly fill such a structure.
|
||||||
|
*/
|
||||||
|
typedef struct _BD_PartitionEntry64
|
||||||
|
{
|
||||||
|
BD_Partition_Flags flags;
|
||||||
|
BD_Partition_Type type;
|
||||||
|
BD_Partition_Options options;
|
||||||
|
bd_uint64_t offset;
|
||||||
|
bd_uint64_t size;
|
||||||
|
char name[BD_MAX_PARTITION_NAME+1];
|
||||||
|
}
|
||||||
|
BD_PartitionEntry64;
|
||||||
|
|
||||||
|
|
||||||
|
/*--- function prototypes ----------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Checks a BD header's validity and updates the BD context.
|
||||||
|
*
|
||||||
|
* @param[in,out] pCtx The context of the BD being checked.
|
||||||
|
* @param[in] pHeader Pointer to the BD header
|
||||||
|
* @return True if the header is valid and the context was updated.
|
||||||
|
* False if the header s not valid.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_CheckHeader( BD_Context* pCtx, const void* pHeader );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Imports BD data from a buffer into a BD context.
|
||||||
|
*
|
||||||
|
* @param[in,out] pCtx The context into which data is imported.
|
||||||
|
* @param[in] pData Pointer to the buffer containing the BD entries.
|
||||||
|
* @return True if BD entries could be succesfuly imported.
|
||||||
|
* False if there is an error in the buffer data structure.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_ImportData( BD_Context* pCtx, const void* pData );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Checks the existence of a tag in the BD
|
||||||
|
*
|
||||||
|
* @param[in,out] pCtx The context in which the tag is searched.
|
||||||
|
* @param[in] tag Tag being checked.
|
||||||
|
* @param[in] index Index of the tag (0=first index).
|
||||||
|
* @return True if the entry exists in the BD else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_ExistsEntry( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Get type and name of a tag in the BD info table
|
||||||
|
*
|
||||||
|
* @param[in] tag Tag reference.
|
||||||
|
* @param[out] pType Type of the tag (0 if not used).
|
||||||
|
* @param[out] pName Name of the tag (0 if not used).
|
||||||
|
* @param[in] bufLen Length of the pName buffer.
|
||||||
|
* If required the returned string for pName will be truncated.
|
||||||
|
* @return True if the tag in the BD info table exists else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetInfo( bd_uint16_t tag, BD_Type* pType, char* pName, bd_size_t bufLen );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Initialize the entry before use BD_GetNextEntry
|
||||||
|
*
|
||||||
|
* @param[out] pEntry BD entry to be initalized.
|
||||||
|
* @return True if the entry was initialized, fasle otherwise.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_InitEntry( BD_Entry* pEntry);
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Get type and name of a tag in the BD info table
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[out] pEntry BD entry (use BD_InitEntry, not 0 for first ).
|
||||||
|
* @return True if the tag in the BD info table exists else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetNextEntry( const BD_Context* pCtx, BD_Entry* pEntry );
|
||||||
|
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a void value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult True if the value could be found else False.
|
||||||
|
* @return False if something went wrong dring the parsing else True.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetVoid( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_bool_t* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets an 8 bits unsigned integer value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read value.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetUInt8( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_uint8_t* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a 16 bits unsigned integer value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read value.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetUInt16( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_uint16_t* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a 32 bits unsigned integer value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read value.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetUInt32( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_uint32_t* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a 64 bits unsigned integer value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read value.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetUInt64( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_uint64_t* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a string value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read value.
|
||||||
|
* @param[in] bufLen Length of the pResult buffer.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*
|
||||||
|
* @note @li The returned string in pResult is null-terminated.
|
||||||
|
* @li If the buffer is too.small to hold the value the returned string is truncated.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetString( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, char* pResult, bd_size_t bufLen );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a binary large object (blob) value from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the value is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read value.
|
||||||
|
* @param[in] bufLen Length of the pResult buffer.
|
||||||
|
* @param[out] pReadLen The actual number of bytes read.
|
||||||
|
* @return True if the complete tag value could be read in pResult else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetBlob( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index,
|
||||||
|
char* pResult, bd_size_t bufLen, bd_size_t* pReadLen );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets an IPv4 address from a BD.
|
||||||
|
*
|
||||||
|
* The IP address is returned as a 32 bits unsigned integer with the most
|
||||||
|
* significant byte first. E.g. 192.168.2.1 is stored as 0xC0A80201
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the IP address is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read IP address.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetIPv4( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_uint32_t* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets an Ethernet MAC address from a BD.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the MAC address is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the read MAC address.
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetMAC( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, bd_uint8_t pResult[6] );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a partition entry from a BD.
|
||||||
|
*
|
||||||
|
* @param[in,out] pCtx The context from which the MAC address is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the partition entry
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetPartition( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, BD_PartitionEntry* pResult );
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Gets a partition64 entry from a BD.
|
||||||
|
*
|
||||||
|
* @param[in,out] pCtx The context from which the MAC address is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[out] pResult Placeholder for the partition entry
|
||||||
|
* @return True if the value in pResult is valid else False.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_GetPartition64( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, BD_PartitionEntry64* pResult );
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef BD_CONF_HAS_HASH
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Verifies the SHA1-HMAC checksum.
|
||||||
|
*
|
||||||
|
* The checksum is computed with the specified key over the area defined
|
||||||
|
* by the hash tag. The key must match the one used to generate the descriptor.
|
||||||
|
*
|
||||||
|
* @param[in] pCtx The context from which the MAC address is read.
|
||||||
|
* @param[in] tag Tag Id.
|
||||||
|
* @param[in] index Index of the tag (0=first occurance).
|
||||||
|
* @param[in] pKey Pointer to key for HMAC initialization.
|
||||||
|
* @param[in] keyLen Size of the key.
|
||||||
|
* @return True if the protected data is unmodified. False in any other case.
|
||||||
|
*/
|
||||||
|
bd_bool_t BD_VerifySha1Hmac( const BD_Context* pCtx, bd_uint16_t tag, bd_uint_t index, const void* pKey, bd_size_t keyLen );
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef BD_CONF_UNIT_TESTS
|
||||||
|
|
||||||
|
/**
|
||||||
|
* Runs unit tests
|
||||||
|
*
|
||||||
|
* If an error occurs an assert is triggered
|
||||||
|
*/
|
||||||
|
void BD_UnitTest(void);
|
||||||
|
|
||||||
|
#endif /* BD_CONF_UNIT_TESTS */
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} /*end extern c*/
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _BDPARSER_H */
|
||||||
|
|
||||||
|
|
@ -0,0 +1,515 @@
|
||||||
|
/*
|
||||||
|
* board.c
|
||||||
|
*
|
||||||
|
* Board functions for TI AM335X based boards
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <errno.h>
|
||||||
|
#include <spl.h>
|
||||||
|
#include <serial.h>
|
||||||
|
#include <asm/arch/cpu.h>
|
||||||
|
#include <asm/arch/hardware.h>
|
||||||
|
#include <asm/arch/omap.h>
|
||||||
|
#include <asm/arch/ddr_defs.h>
|
||||||
|
#include <asm/arch/clock.h>
|
||||||
|
#include <asm/arch/clk_synthesizer.h>
|
||||||
|
#include <asm/arch/gpio.h>
|
||||||
|
#include <asm/arch/mmc_host_def.h>
|
||||||
|
#include <asm/arch/sys_proto.h>
|
||||||
|
#include <asm/arch/mem.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <asm/emif.h>
|
||||||
|
#include <asm/gpio.h>
|
||||||
|
#include <i2c.h>
|
||||||
|
#include <miiphy.h>
|
||||||
|
#include <cpsw.h>
|
||||||
|
#include <power/tps65217.h>
|
||||||
|
#include <power/tps65218.h>
|
||||||
|
#include <power/tps65910.h>
|
||||||
|
#include <environment.h>
|
||||||
|
#include <watchdog.h>
|
||||||
|
#include <environment.h>
|
||||||
|
#include "board_descriptor.h"
|
||||||
|
#include "board.h"
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
/* GPIO that controls power to DDR on EVM-SK */
|
||||||
|
#define GPIO_TO_PIN(bank, gpio) (32 * (bank) + (gpio))
|
||||||
|
#define GPIO_DDR_VTT_EN GPIO_TO_PIN(0, 7)
|
||||||
|
#define ICE_GPIO_DDR_VTT_EN GPIO_TO_PIN(0, 18)
|
||||||
|
#define GPIO_PR1_MII_CTRL GPIO_TO_PIN(3, 4)
|
||||||
|
#define GPIO_MUX_MII_CTRL GPIO_TO_PIN(3, 10)
|
||||||
|
#define GPIO_FET_SWITCH_CTRL GPIO_TO_PIN(0, 7)
|
||||||
|
#define GPIO_PHY_RESET GPIO_TO_PIN(2, 5)
|
||||||
|
|
||||||
|
#define NETBIRD_GPIO_RST_PHY_N GPIO_TO_PIN(0, 16)
|
||||||
|
#define NETBIRD_GPIO_PWR_GSM GPIO_TO_PIN(1, 22)
|
||||||
|
#define NETBIRD_GPIO_SUPPLY_GSM GPIO_TO_PIN(0, 31)
|
||||||
|
#define NETBIRD_GPIO_RST_GSM GPIO_TO_PIN(1, 25)
|
||||||
|
#define NETBIRD_GPIO_WLAN_EN GPIO_TO_PIN(3, 10)
|
||||||
|
#define NETBIRD_GPIO_BT_EN GPIO_TO_PIN(3, 4)
|
||||||
|
#define NETBIRD_GPIO_EN_GPS_ANT GPIO_TO_PIN(2, 24)
|
||||||
|
#define NETBIRD_GPIO_LED_A GPIO_TO_PIN(1, 14)
|
||||||
|
#define NETBIRD_GPIO_LED_B GPIO_TO_PIN(1, 15)
|
||||||
|
#define NETBIRD_GPIO_RESET_BUTTON GPIO_TO_PIN(1, 13)
|
||||||
|
|
||||||
|
#define DDR3_CLOCK_FREQUENCY (400)
|
||||||
|
|
||||||
|
#if defined(CONFIG_SPL_BUILD) || \
|
||||||
|
(defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_DM_ETH))
|
||||||
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Read header information from EEPROM into global structure.
|
||||||
|
*/
|
||||||
|
static inline int __maybe_unused read_eeprom(void)
|
||||||
|
{
|
||||||
|
return bd_read(-1, CONFIG_SYS_I2C_EEPROM_ADDR);
|
||||||
|
}
|
||||||
|
|
||||||
|
struct serial_device *default_serial_console(void)
|
||||||
|
{
|
||||||
|
return &eserial1_device;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
||||||
|
|
||||||
|
static const struct ddr_data ddr3_netbird_data = {
|
||||||
|
/* Ratios were optimized by DDR3 training software from TI */
|
||||||
|
.datardsratio0 = 0x37,
|
||||||
|
.datawdsratio0 = 0x42,
|
||||||
|
.datafwsratio0 = 0x98,
|
||||||
|
.datawrsratio0 = 0x7a,
|
||||||
|
};
|
||||||
|
|
||||||
|
static const struct cmd_control ddr3_netbird_cmd_ctrl_data = {
|
||||||
|
.cmd0csratio = MT41K256M16HA125E_RATIO,
|
||||||
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
||||||
|
|
||||||
|
.cmd1csratio = MT41K256M16HA125E_RATIO,
|
||||||
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
||||||
|
|
||||||
|
.cmd2csratio = MT41K256M16HA125E_RATIO,
|
||||||
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct emif_regs ddr3_netbird_emif_reg_data = {
|
||||||
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
|
||||||
|
.ref_ctrl = 0x61A, /* 32ms > 85°C */
|
||||||
|
.sdram_tim1 = 0x0AAAE51B,
|
||||||
|
.sdram_tim2 = 0x246B7FDA,
|
||||||
|
.sdram_tim3 = 0x50FFE67F,
|
||||||
|
.zq_config = MT41K256M16HA125E_ZQ_CFG,
|
||||||
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef CONFIG_SPL_OS_BOOT
|
||||||
|
int spl_start_uboot(void)
|
||||||
|
{
|
||||||
|
/* break into full u-boot on 'c' */
|
||||||
|
if (serial_tstc() && serial_getc() == 'c')
|
||||||
|
return 1;
|
||||||
|
|
||||||
|
#ifdef CONFIG_SPL_ENV_SUPPORT
|
||||||
|
env_init();
|
||||||
|
env_relocate_spec();
|
||||||
|
if (getenv_yesno("boot_os") != 1)
|
||||||
|
return 1;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define OSC (V_OSCK/1000000)
|
||||||
|
struct dpll_params dpll_ddr_nbhw16= {
|
||||||
|
DDR3_CLOCK_FREQUENCY, OSC-1, 1, -1, -1, -1, -1};
|
||||||
|
|
||||||
|
void am33xx_spl_board_init(void)
|
||||||
|
{
|
||||||
|
/* Get the frequency */
|
||||||
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
||||||
|
|
||||||
|
/* Set CPU speed to 600 MHZ */
|
||||||
|
dpll_mpu_opp100.m = MPUPLL_M_600;
|
||||||
|
|
||||||
|
/* Set CORE Frequencies to OPP100 */
|
||||||
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
||||||
|
|
||||||
|
/* Clear th PFM Flag on DCDC4 */
|
||||||
|
if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, TPS65218_DCDC4, 0x00, 0x80)) {
|
||||||
|
puts ("tps65218_reg_write failure (DCDC4 clear PFM Flag)\n");
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Disable DCDC2 because it is not used and could make noise */
|
||||||
|
if (tps65218_reg_write(TPS65218_PROT_LEVEL_2, TPS65218_ENABLE1, 0, 0x02)) {
|
||||||
|
puts ("tps65218_reg_write failure (DCDC2 disable)\n");
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
/* Set MPU Frequency to what we detected now that voltages are set */
|
||||||
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
||||||
|
|
||||||
|
if (read_eeprom() < 0)
|
||||||
|
puts("Could not get board ID.\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
const struct dpll_params *get_dpll_ddr_params(void)
|
||||||
|
{
|
||||||
|
dpll_ddr_nbhw16.n = (get_osclk() / 1000000) - 1;
|
||||||
|
return &dpll_ddr_nbhw16;
|
||||||
|
}
|
||||||
|
|
||||||
|
void set_uart_mux_conf(void)
|
||||||
|
{
|
||||||
|
enable_uart0_pin_mux();
|
||||||
|
enable_uart1_pin_mux();
|
||||||
|
}
|
||||||
|
|
||||||
|
void set_mux_conf_regs(void)
|
||||||
|
{
|
||||||
|
enable_board_pin_mux();
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
const struct ctrl_ioregs ioregs_netbird = {
|
||||||
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
||||||
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
||||||
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
||||||
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
||||||
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
void sdram_init(void)
|
||||||
|
{
|
||||||
|
config_ddr(DDR3_CLOCK_FREQUENCY, &ioregs_netbird,
|
||||||
|
&ddr3_netbird_data,
|
||||||
|
&ddr3_netbird_cmd_ctrl_data,
|
||||||
|
&ddr3_netbird_emif_reg_data, 0);
|
||||||
|
}
|
||||||
|
|
||||||
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|
||||||
|
|
||||||
|
static void request_and_set_gpio(int gpio, char *name, int value)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = gpio_request(gpio, name);
|
||||||
|
if (ret < 0) {
|
||||||
|
printf("%s: Unable to request %s\n", __func__, name);
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = gpio_direction_output(gpio, 0);
|
||||||
|
if (ret < 0) {
|
||||||
|
printf("%s: Unable to set %s as output\n", __func__, name);
|
||||||
|
goto err_free_gpio;
|
||||||
|
}
|
||||||
|
|
||||||
|
gpio_set_value(gpio, value);
|
||||||
|
|
||||||
|
return;
|
||||||
|
|
||||||
|
err_free_gpio:
|
||||||
|
gpio_free(gpio);
|
||||||
|
}
|
||||||
|
|
||||||
|
#define REQUEST_AND_SET_GPIO(N) request_and_set_gpio(N, #N, 1);
|
||||||
|
#define REQUEST_AND_CLEAR_GPIO(N) request_and_set_gpio(N, #N, 0);
|
||||||
|
|
||||||
|
|
||||||
|
int check_reset_button(void)
|
||||||
|
{
|
||||||
|
int counter = 0;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = gpio_request(NETBIRD_GPIO_RESET_BUTTON, "reset button");
|
||||||
|
if (ret < 0) {
|
||||||
|
printf("Unable to request reset button gpio\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = gpio_direction_input(NETBIRD_GPIO_RESET_BUTTON);
|
||||||
|
if (ret < 0) {
|
||||||
|
printf("Unable to set reset button as input\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Check if reset button is pressed for at least 3 seconds */
|
||||||
|
do {
|
||||||
|
if (gpio_get_value(NETBIRD_GPIO_RESET_BUTTON) != 0) break;
|
||||||
|
udelay(100000); /* 100ms */
|
||||||
|
counter++;
|
||||||
|
|
||||||
|
if (counter==30) {/* Indicate factory reset threshold */
|
||||||
|
/* let LED blink up once */
|
||||||
|
gpio_set_value(NETBIRD_GPIO_LED_B, 1);
|
||||||
|
udelay(400000); /* 400ms */
|
||||||
|
gpio_set_value(NETBIRD_GPIO_LED_B, 0);
|
||||||
|
} else if (counter==150) { /* Indicate recovery boot threshold */
|
||||||
|
/* let LED blink up twice */
|
||||||
|
gpio_set_value(NETBIRD_GPIO_LED_B, 1);
|
||||||
|
udelay(400000); /* 400ms */
|
||||||
|
gpio_set_value(NETBIRD_GPIO_LED_B, 0);
|
||||||
|
udelay(400000); /* 400ms */
|
||||||
|
gpio_set_value(NETBIRD_GPIO_LED_B, 1);
|
||||||
|
udelay(400000); /* 400ms */
|
||||||
|
gpio_set_value(NETBIRD_GPIO_LED_B, 0);
|
||||||
|
}
|
||||||
|
} while (counter<150);
|
||||||
|
|
||||||
|
if (counter < 30) return 0; /* Don't do anything for duration < 3s */
|
||||||
|
|
||||||
|
if (counter < 150) /* Do factory reset for duration between 3s and 15s */
|
||||||
|
{
|
||||||
|
char new_bootargs[512];
|
||||||
|
char *bootargs = getenv("bootargs");
|
||||||
|
|
||||||
|
if (bootargs==0) bootargs="";
|
||||||
|
|
||||||
|
printf("Do factory reset during boot...\n");
|
||||||
|
|
||||||
|
strncpy(new_bootargs, bootargs, sizeof(new_bootargs));
|
||||||
|
strncat(new_bootargs, " factory-reset", sizeof(new_bootargs));
|
||||||
|
|
||||||
|
setenv("bootargs", new_bootargs);
|
||||||
|
|
||||||
|
printf("bootargs = %s\n", new_bootargs);
|
||||||
|
|
||||||
|
return 1;
|
||||||
|
} else { /* Boot into recovery for duration > 15s */
|
||||||
|
|
||||||
|
/* set consoledev to external port */
|
||||||
|
setenv("consoledev", "ttyO0");
|
||||||
|
|
||||||
|
printf("Booting recovery image...\n");
|
||||||
|
|
||||||
|
/* Set bootcmd to run recovery */
|
||||||
|
setenv("bootcmd", "run recovery");
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Basic board specific setup. Pinmux has been handled already.
|
||||||
|
*/
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
#if defined(CONFIG_HW_WATCHDOG)
|
||||||
|
hw_watchdog_init();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
||||||
|
#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
|
||||||
|
gpmc_init();
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Power on the supply of the gsm modem */
|
||||||
|
REQUEST_AND_SET_GPIO(NETBIRD_GPIO_SUPPLY_GSM);
|
||||||
|
mdelay(100);
|
||||||
|
/* Take modem out of reset */
|
||||||
|
REQUEST_AND_CLEAR_GPIO(NETBIRD_GPIO_RST_GSM);
|
||||||
|
udelay(10000);
|
||||||
|
/* Do power up sequence, this modem has a special power up sequence
|
||||||
|
* where we have to pull PWR for > 1s but < 7s (see manual) */
|
||||||
|
REQUEST_AND_SET_GPIO(NETBIRD_GPIO_PWR_GSM);
|
||||||
|
mdelay(1200);
|
||||||
|
gpio_set_value(NETBIRD_GPIO_PWR_GSM, 0);
|
||||||
|
/* Enable debug LED to troubleshoot hw problems */
|
||||||
|
REQUEST_AND_SET_GPIO(NETBIRD_GPIO_LED_A);
|
||||||
|
REQUEST_AND_CLEAR_GPIO(NETBIRD_GPIO_LED_B);
|
||||||
|
REQUEST_AND_SET_GPIO(NETBIRD_GPIO_RST_PHY_N);
|
||||||
|
REQUEST_AND_CLEAR_GPIO(NETBIRD_GPIO_WLAN_EN);
|
||||||
|
REQUEST_AND_CLEAR_GPIO(NETBIRD_GPIO_BT_EN);
|
||||||
|
/* There are two funcions on the same mux mode for MMC2_DAT7 we want
|
||||||
|
* to use RMII2_CRS_DV so we need to set SMA2 Register to 1
|
||||||
|
* See SPRS717J site 49 (10)*/
|
||||||
|
#define SMA2_REGISTER (CTRL_BASE + 0x1320)
|
||||||
|
writel(0x01, SMA2_REGISTER); /* Select RMII2_CRS_DV instead of MMC2_DAT7 */
|
||||||
|
|
||||||
|
printf("OSC: %lu Hz\n", get_osclk());
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_BOARD_LATE_INIT
|
||||||
|
int board_late_init(void)
|
||||||
|
{
|
||||||
|
#if !defined(CONFIG_SPL_BUILD)
|
||||||
|
int hw_ver, hw_rev;
|
||||||
|
int boot_partition;
|
||||||
|
|
||||||
|
if (read_eeprom() < 0)
|
||||||
|
puts("Could not get board ID.\n");
|
||||||
|
|
||||||
|
/* add active root partition to environment */
|
||||||
|
boot_partition = bd_get_boot_partition();
|
||||||
|
if (boot_partition > 1) {
|
||||||
|
boot_partition = 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* mmcblk0p1 => root0, mmcblk0p2 => root1 so +1 */
|
||||||
|
setenv_ulong("root_part", boot_partition + 1);
|
||||||
|
|
||||||
|
/* add hardware versions to environment */
|
||||||
|
if (bd_get_hw_version(&hw_ver, &hw_rev)==0) {
|
||||||
|
char hw_versions[128];
|
||||||
|
char new_env[256];
|
||||||
|
snprintf(hw_versions, sizeof(hw_versions), "CP=%d.%d", hw_ver, hw_rev);
|
||||||
|
snprintf(new_env, sizeof(new_env), "setenv bootargs $bootargs %s", hw_versions);
|
||||||
|
setenv("add_version_bootargs", new_env);
|
||||||
|
}
|
||||||
|
|
||||||
|
check_reset_button();
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||||
|
int rc;
|
||||||
|
char *name = NULL;
|
||||||
|
|
||||||
|
set_board_info_env(name);
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifndef CONFIG_DM_ETH
|
||||||
|
|
||||||
|
#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
|
||||||
|
(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
|
||||||
|
static void cpsw_control(int enabled)
|
||||||
|
{
|
||||||
|
/* VTP can be added here */
|
||||||
|
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
static struct cpsw_slave_data cpsw_slaves[] = {
|
||||||
|
{
|
||||||
|
.slave_reg_ofs = 0x208,
|
||||||
|
.sliver_reg_ofs = 0xd80,
|
||||||
|
.phy_addr = 0,
|
||||||
|
},
|
||||||
|
{
|
||||||
|
.slave_reg_ofs = 0x308,
|
||||||
|
.sliver_reg_ofs = 0xdc0,
|
||||||
|
.phy_addr = 1,
|
||||||
|
},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct cpsw_platform_data cpsw_data = {
|
||||||
|
.mdio_base = CPSW_MDIO_BASE,
|
||||||
|
.cpsw_base = CPSW_BASE,
|
||||||
|
.mdio_div = 0xff,
|
||||||
|
.channels = 8,
|
||||||
|
.cpdma_reg_ofs = 0x800,
|
||||||
|
.slaves = 1,
|
||||||
|
.slave_data = cpsw_slaves,
|
||||||
|
.ale_reg_ofs = 0xd00,
|
||||||
|
.ale_entries = 1024,
|
||||||
|
.host_port_reg_ofs = 0x108,
|
||||||
|
.hw_stats_reg_ofs = 0x900,
|
||||||
|
.bd_ram_ofs = 0x2000,
|
||||||
|
.mac_control = (1 << 5),
|
||||||
|
.control = cpsw_control,
|
||||||
|
.host_port_num = 0,
|
||||||
|
.version = CPSW_CTRL_VERSION_2,
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) &&\
|
||||||
|
defined(CONFIG_SPL_BUILD)) || \
|
||||||
|
((defined(CONFIG_DRIVER_TI_CPSW) || \
|
||||||
|
defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
|
||||||
|
!defined(CONFIG_SPL_BUILD))
|
||||||
|
|
||||||
|
static void set_mac_address(int index, uchar mac[6])
|
||||||
|
{
|
||||||
|
/* Then take mac from bd */
|
||||||
|
if (is_valid_ethaddr(mac)) {
|
||||||
|
eth_setenv_enetaddr_by_index("eth", index, mac);
|
||||||
|
}
|
||||||
|
else {
|
||||||
|
printf("Trying to set invalid MAC address");
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This function will:
|
||||||
|
* Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr
|
||||||
|
* in the environment
|
||||||
|
* Perform fixups to the PHY present on certain boards. We only need this
|
||||||
|
* function in:
|
||||||
|
* - SPL with either CPSW or USB ethernet support
|
||||||
|
* - Full U-Boot, with either CPSW or USB ethernet
|
||||||
|
* Build in only these cases to avoid warnings about unused variables
|
||||||
|
* when we build an SPL that has neither option but full U-Boot will.
|
||||||
|
*/
|
||||||
|
int board_eth_init(bd_t *bis)
|
||||||
|
{
|
||||||
|
int rv, n = 0;
|
||||||
|
uint8_t mac_addr0[6] = {02,00,00,00,00,01};
|
||||||
|
uint8_t mac_addr1[6] = {02,00,00,00,00,02};
|
||||||
|
__maybe_unused struct ti_am_eeprom *header;
|
||||||
|
|
||||||
|
#if !defined(CONFIG_SPL_BUILD)
|
||||||
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
||||||
|
|
||||||
|
cpsw_data.mdio_div = 0x3E;
|
||||||
|
|
||||||
|
bd_get_mac_address(0, mac_addr0, sizeof(mac_addr0));
|
||||||
|
set_mac_address(0, mac_addr0);
|
||||||
|
|
||||||
|
bd_get_mac_address(1, mac_addr1, sizeof(mac_addr1));
|
||||||
|
set_mac_address(1, mac_addr1);
|
||||||
|
|
||||||
|
writel(RMII_MODE_ENABLE | RMII_CHIPCKL_ENABLE, &cdev->miisel);
|
||||||
|
cpsw_slaves[0].phy_if = PHY_INTERFACE_MODE_RMII;
|
||||||
|
cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RMII;
|
||||||
|
cpsw_slaves[0].phy_addr = 0;
|
||||||
|
cpsw_slaves[1].phy_addr = 1;
|
||||||
|
|
||||||
|
rv = cpsw_register(&cpsw_data);
|
||||||
|
if (rv < 0)
|
||||||
|
printf("Error %d registering CPSW switch\n", rv);
|
||||||
|
else
|
||||||
|
n += rv;
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
||||||
|
#if defined(CONFIG_USB_ETHER) && \
|
||||||
|
(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
|
||||||
|
if (is_valid_ethaddr(mac_addr0))
|
||||||
|
eth_setenv_enetaddr("usbnet_devaddr", mac_addr0);
|
||||||
|
|
||||||
|
rv = usb_eth_initialize(bis);
|
||||||
|
if (rv < 0)
|
||||||
|
printf("Error %d registering USB_ETHER\n", rv);
|
||||||
|
else
|
||||||
|
n += rv;
|
||||||
|
#endif
|
||||||
|
return n;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* CONFIG_DM_ETH */
|
||||||
|
|
||||||
|
#ifdef CONFIG_SPL_LOAD_FIT
|
||||||
|
int board_fit_config_name_match(const char *name)
|
||||||
|
{
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,27 @@
|
||||||
|
/*
|
||||||
|
* board.h
|
||||||
|
*
|
||||||
|
* TI AM335x boards information header
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _BOARD_H_
|
||||||
|
#define _BOARD_H_
|
||||||
|
/*
|
||||||
|
* We have three pin mux functions that must exist. We must be able to enable
|
||||||
|
* uart0, for initial output and i2c0 to read the main EEPROM. We then have a
|
||||||
|
* main pinmux function that can be overridden to enable all other pinmux that
|
||||||
|
* is required on the board.
|
||||||
|
*/
|
||||||
|
void enable_uart0_pin_mux(void);
|
||||||
|
void enable_uart1_pin_mux(void);
|
||||||
|
void enable_uart2_pin_mux(void);
|
||||||
|
void enable_uart3_pin_mux(void);
|
||||||
|
void enable_uart4_pin_mux(void);
|
||||||
|
void enable_uart5_pin_mux(void);
|
||||||
|
void enable_i2c0_pin_mux(void);
|
||||||
|
void enable_board_pin_mux(void);
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,240 @@
|
||||||
|
/*
|
||||||
|
* Library to support early TI EVM EEPROM handling
|
||||||
|
*
|
||||||
|
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
* Lokesh Vutla
|
||||||
|
* Steve Kipisz
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <asm/omap_common.h>
|
||||||
|
#include <i2c.h>
|
||||||
|
#include <malloc.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
|
||||||
|
#include "board_descriptor.h"
|
||||||
|
#include "bdparser.h"
|
||||||
|
|
||||||
|
#define SYSINFO_ADDRESS 0x0000 /* Board descriptor at beginning of EEPROM */
|
||||||
|
#define SYSCONFIG_ADDRESS 0x0600 /* Board descriptor at beginning of EEPROM */
|
||||||
|
#define MAX_PARTITION_ENTRIES 4
|
||||||
|
|
||||||
|
static BD_Context *bd_board_info = 0;
|
||||||
|
static BD_Context *bd_system_config = 0;
|
||||||
|
|
||||||
|
static int i2c_eeprom_init(int i2c_bus, int dev_addr)
|
||||||
|
{
|
||||||
|
int rc;
|
||||||
|
|
||||||
|
if (i2c_bus >= 0) {
|
||||||
|
rc = i2c_set_bus_num(i2c_bus);
|
||||||
|
if (rc)
|
||||||
|
return rc;
|
||||||
|
}
|
||||||
|
|
||||||
|
return i2c_probe(dev_addr);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int i2c_eeprom_read(int offset, void *data, size_t len)
|
||||||
|
{
|
||||||
|
return i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR,
|
||||||
|
offset,
|
||||||
|
CONFIG_SYS_I2C_EEPROM_ADDR_LEN,
|
||||||
|
data,
|
||||||
|
len);
|
||||||
|
}
|
||||||
|
|
||||||
|
static int boardinfo_read(BD_Context **context, size_t start_addr)
|
||||||
|
{
|
||||||
|
char bd_header_buffer[8];
|
||||||
|
void *bd_data = NULL;
|
||||||
|
|
||||||
|
if(*context)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
*context = calloc(sizeof(BD_Context), 1);
|
||||||
|
if(!*context)
|
||||||
|
{
|
||||||
|
printf("Couldn't allocate memory for board information\n");
|
||||||
|
goto failed;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (i2c_eeprom_read(start_addr, bd_header_buffer, sizeof(bd_header_buffer))) {
|
||||||
|
printf("%s() Can't read BD header from EEPROM\n", __FUNCTION__);
|
||||||
|
goto failed;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!BD_CheckHeader(*context, bd_header_buffer))
|
||||||
|
{
|
||||||
|
printf("Invalid board information header\n");
|
||||||
|
goto failed;
|
||||||
|
}
|
||||||
|
|
||||||
|
bd_data = malloc((*context)->size);
|
||||||
|
if (bd_data == NULL)
|
||||||
|
{
|
||||||
|
printf("Can not allocate memory for board info");
|
||||||
|
goto failed;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (i2c_eeprom_read(start_addr + sizeof(bd_header_buffer), bd_data, (*context)->size))
|
||||||
|
{
|
||||||
|
printf("Can not read board information data");
|
||||||
|
goto failed;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (!BD_ImportData(*context, bd_data))
|
||||||
|
{
|
||||||
|
printf("Invalid board information!\n");
|
||||||
|
goto failed;
|
||||||
|
}
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
failed:
|
||||||
|
if (bd_data != NULL)
|
||||||
|
{
|
||||||
|
free(bd_data);
|
||||||
|
bd_data = NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (*context != NULL)
|
||||||
|
{
|
||||||
|
free(*context);
|
||||||
|
*context = NULL;
|
||||||
|
}
|
||||||
|
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void read_sysinfo(void)
|
||||||
|
{
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = boardinfo_read(&bd_board_info, SYSINFO_ADDRESS);
|
||||||
|
if (err ) {
|
||||||
|
printf("Could not read sysinf boarddescriptor\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
static void read_sysconfig(void)
|
||||||
|
{
|
||||||
|
int err;
|
||||||
|
|
||||||
|
err = boardinfo_read(&bd_system_config, SYSCONFIG_ADDRESS);
|
||||||
|
if (err ) {
|
||||||
|
printf("Could not read sysconfig boarddescriptor\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
int bd_read (int bus_addr, int dev_addr)
|
||||||
|
{
|
||||||
|
if (i2c_eeprom_init(bus_addr, dev_addr)) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
read_sysinfo();
|
||||||
|
read_sysconfig();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
static u8 try_partition_read(void)
|
||||||
|
{
|
||||||
|
BD_PartitionEntry64 partition;
|
||||||
|
int i;
|
||||||
|
int rc;
|
||||||
|
int partition_count = 0;
|
||||||
|
int boot_partition = 0;
|
||||||
|
|
||||||
|
for (i = 0; i < MAX_PARTITION_ENTRIES; i++)
|
||||||
|
{
|
||||||
|
rc = BD_GetPartition64( bd_system_config, BD_Partition64, i, &partition );
|
||||||
|
if (rc) {
|
||||||
|
partition_count++;
|
||||||
|
if (((partition.flags & BD_Partition_Flags_Active) != 0) &&
|
||||||
|
(i > 0)) {
|
||||||
|
boot_partition = i;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
if (partition_count < 1)
|
||||||
|
{
|
||||||
|
printf("ERROR: Too few partitions defined, taking default 0\n");
|
||||||
|
}
|
||||||
|
|
||||||
|
return boot_partition;
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
u8 bd_get_boot_partition(void)
|
||||||
|
{
|
||||||
|
u8 boot_part;
|
||||||
|
|
||||||
|
if ((bd_system_config == 0)) {
|
||||||
|
puts("System config not valid, can not get boot partition\n");
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* If we have a new Bootpartition entry take this as boot part */
|
||||||
|
if ( BD_GetUInt8( bd_system_config, BD_BootPart, 0, &boot_part) ) {
|
||||||
|
if (boot_part >= 0 && boot_part <= 1) {
|
||||||
|
return boot_part;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
/* If we not have a Bootpartition entry, perhaps we have a partition table */
|
||||||
|
return try_partition_read();
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
int bd_get_mac_address(uint index, u8 *mac, u32 len)
|
||||||
|
{
|
||||||
|
if (bd_board_info == 0) {
|
||||||
|
puts("Board info not valid, can not get mac address\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (len != 6) {
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
if (BD_GetMAC( bd_board_info, BD_Eth_Mac, index, mac))
|
||||||
|
return 0;
|
||||||
|
else
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
int bd_get_hw_version(int* pVer, int* pRev)
|
||||||
|
{
|
||||||
|
u8 bdCpHwVer = 0;
|
||||||
|
u8 bdCpHwRev = 0;
|
||||||
|
|
||||||
|
if (bd_board_info == 0) {
|
||||||
|
puts("Board info not valid, can not get hw version\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
/* Hardware version/revision */
|
||||||
|
if ( !BD_GetUInt8( bd_board_info, BD_Hw_Ver, 0, &bdCpHwVer) ) {
|
||||||
|
printf("no Hw version found\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
/* Hardware version/revision */
|
||||||
|
if ( !BD_GetUInt8( bd_board_info, BD_Hw_Rel, 0, &bdCpHwRev) ) {
|
||||||
|
printf("no Hw release found\n");
|
||||||
|
return -1;
|
||||||
|
}
|
||||||
|
|
||||||
|
*pVer = bdCpHwVer;
|
||||||
|
*pRev = bdCpHwRev;
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,17 @@
|
||||||
|
/*
|
||||||
|
* Library to support early TI EVM EEPROM handling
|
||||||
|
*
|
||||||
|
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __BOARD_DESCRIPTOR_H
|
||||||
|
#define __BOARD_DESCRIPTOR_H
|
||||||
|
|
||||||
|
int bd_read(int bus_addr, int dev_addr);
|
||||||
|
u8 bd_get_boot_partition(void);
|
||||||
|
int bd_get_mac_address(uint index, u8 *mac_address, u32 len);
|
||||||
|
int bd_get_hw_version(int* pVer, int* pRev);
|
||||||
|
|
||||||
|
#endif /* __BOARD_DESCRIPTOR_H */
|
||||||
|
|
@ -0,0 +1,217 @@
|
||||||
|
/*
|
||||||
|
* mux.c
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation version 2.
|
||||||
|
*
|
||||||
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||||
|
* kind, whether express or implied; without even the implied warranty
|
||||||
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <asm/arch/sys_proto.h>
|
||||||
|
#include <asm/arch/hardware.h>
|
||||||
|
#include <asm/arch/mux.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <i2c.h>
|
||||||
|
#include "board.h"
|
||||||
|
|
||||||
|
static struct module_pin_mux uart2_pin_mux[] = {
|
||||||
|
{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART2_RXD */
|
||||||
|
{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)}, /* UART2_TXD */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux uart3_pin_mux[] = {
|
||||||
|
{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)}, /* UART3_RXD */
|
||||||
|
{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)}, /* UART3_TXD */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux uart4_pin_mux[] = {
|
||||||
|
{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)}, /* UART4_RXD */
|
||||||
|
{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)}, /* UART4_TXD */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux uart5_pin_mux[] = {
|
||||||
|
{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)}, /* UART5_RXD */
|
||||||
|
{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)}, /* UART5_TXD */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux i2c0_pin_mux[] = {
|
||||||
|
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
|
||||||
|
PULLUDEN | PULLUP_EN | SLEWCTRL)}, /* I2C_DATA */
|
||||||
|
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
|
||||||
|
PULLUDEN | PULLUP_EN | SLEWCTRL)}, /* I2C_SCLK */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
/* V2OK */
|
||||||
|
static struct module_pin_mux uart0_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(uart0_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* (E15) UART0_RXD */
|
||||||
|
{OFFSET(uart0_txd), (MODE(0) | PULLUDEN | PULLUP_EN)}, /* (E16) UART0_TXD */
|
||||||
|
{OFFSET(uart0_ctsn), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* (E18) UART0_CTSN */
|
||||||
|
{OFFSET(uart0_rtsn), (MODE(0) | PULLUDEN | PULLUP_EN)}, /* (E17) UART0_RTSN */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
/* V2OK */
|
||||||
|
static struct module_pin_mux uart1_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(uart1_rxd), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* (D16) uart1_rxd.uart1_rxd */
|
||||||
|
{OFFSET(uart1_txd), (MODE(0) | PULLUDEN | PULLUP_EN)}, /* (D15) uart1_txd.uart1_txd */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
/* V2OK */
|
||||||
|
static struct module_pin_mux rmii1_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(mii1_crs), MODE(1) | PULLUDDIS | RXACTIVE}, /* (H17) mii1_crs.rmii1_crs */
|
||||||
|
{OFFSET(mii1_rxerr), MODE(1) | PULLUDDIS | RXACTIVE}, /* (J15) mii1_rxerr.rmii1_rxerr */
|
||||||
|
{OFFSET(mii1_txen), MODE(1) | PULLUDDIS }, /* (J16) mii1_txen.rmii1_txen */
|
||||||
|
{OFFSET(mii1_txd0), MODE(1) | PULLUDDIS }, /* (K17) mii1_txd0.rmii1_txd0 */
|
||||||
|
{OFFSET(mii1_txd1), MODE(1) | PULLUDDIS }, /* (K16) mii1_txd1.rmii1_txd1 */
|
||||||
|
{OFFSET(mii1_rxd0), MODE(1) | PULLUDDIS | RXACTIVE }, /* (M16) mii1_rxd0.rmii1_rxd0 */
|
||||||
|
{OFFSET(mii1_rxd1), MODE(1) | PULLUDDIS | RXACTIVE }, /* (L15) mii1_rxd1.rmii1_rxd1 */
|
||||||
|
{OFFSET(rmii1_refclk), MODE(0) | PULLUDDIS | RXACTIVE}, /* (H18) rmii1_refclk.rmii1_refclk */
|
||||||
|
{OFFSET(mdio_clk), MODE(0) | PULLUDDIS }, /* (M18) mdio_clk.mdio_clk */
|
||||||
|
{OFFSET(mdio_data), MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE }, /* (M17) mido_data.mdio_data */
|
||||||
|
{OFFSET(xdma_event_intr0), MODE(3) }, /* (A15) xdma_event_intr0.clkout1 (25 MHz clk for MDIO) */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux mmc0_sdio_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(mmc0_clk), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* MMC0_CLK */
|
||||||
|
{OFFSET(mmc0_cmd), (MODE(0) | PULLUDEN | PULLUP_EN)}, /* MMC0_CMD */
|
||||||
|
{OFFSET(mmc0_dat0), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC0_DAT0 */
|
||||||
|
{OFFSET(mmc0_dat1), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC0_DAT1 */
|
||||||
|
{OFFSET(mmc0_dat2), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC0_DAT2 */
|
||||||
|
{OFFSET(mmc0_dat3), (MODE(0) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC0_DAT3 */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux mmc1_emmc_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(gpmc_csn1), (MODE(2) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* MMC1_CLK */
|
||||||
|
{OFFSET(gpmc_csn2), (MODE(2) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* MMC1_CMD */
|
||||||
|
{OFFSET(gpmc_ad0), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT0 */
|
||||||
|
{OFFSET(gpmc_ad1), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT1 */
|
||||||
|
{OFFSET(gpmc_ad2), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT2 */
|
||||||
|
{OFFSET(gpmc_ad3), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT3 */
|
||||||
|
{OFFSET(gpmc_ad4), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT3 */
|
||||||
|
{OFFSET(gpmc_ad5), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT3 */
|
||||||
|
{OFFSET(gpmc_ad6), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT3 */
|
||||||
|
{OFFSET(gpmc_ad7), (MODE(1) | PULLUDEN | PULLUP_EN | RXACTIVE )}, /* MMC1_DAT3 */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux gpio_netbird_pin_mux[] = {
|
||||||
|
/* Bank 0 */
|
||||||
|
{OFFSET(spi0_sclk), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* (A17) spi0_sclk.gpio0[2] */ /* BUTTON */
|
||||||
|
{OFFSET(ecap0_in_pwm0_out), (MODE(7) | PULLUDEN | PULLUP_EN)}, /* (C18) eCAP0_in_PWM0_out.gpio0[7] */ /* PWM */
|
||||||
|
{OFFSET(mii1_txd3), (MODE(7) | PULLUDDIS)}, /* (J18) gmii1_txd3.gpio0[16] */ /* RST_PHY~ */
|
||||||
|
{OFFSET(gpmc_ad11), (MODE(7) | PULLUDDIS)}, /* (U12) gpmc_ad11.gpio0[27] */ /* RST_EXT~ */
|
||||||
|
/* Bank 1 */
|
||||||
|
{OFFSET(gpmc_ad14), (MODE(7) | PULLUDDIS)}, /* (V13) gpmc_ad14.gpio1[14] */ /* LED_A */
|
||||||
|
{OFFSET(gpmc_ad15), (MODE(7) | PULLUDDIS)}, /* (U13) gpmc_ad15.gpio1[15] */ /* LED_B */
|
||||||
|
{OFFSET(gpmc_a11), (MODE(7) | PULLUDEN | PULLUP_EN)}, /* (V17) gpmc_a11.gpio1[27] */ /* USB_PWR_EN */
|
||||||
|
{OFFSET(gpmc_a9), (MODE(7) | PULLUDEN | PULLUP_EN)}, /* (U16) gpmc_a9.gpio1[25] */ /* RST_GSM */
|
||||||
|
{OFFSET(gpmc_csn3), (MODE(7) | PULLUDEN | PULLUP_EN)}, /* (U17) gpmc_csn3.gpio0[31] */ /* GSM_SUPP_EN */
|
||||||
|
{OFFSET(gpmc_a5), (MODE(7) | PULLUDEN | PULLUP_EN)}, /* (V15) gpmc_a5.gpio1[21] */ /* GSM_PWR_EN */
|
||||||
|
/* Bank 2 */
|
||||||
|
{OFFSET(lcd_data3), (MODE(7) | PULLUDEN| PULLUP_EN)}, /* (V5) lcd_pclk.gpio2[9] */ /* SYSBOOT */
|
||||||
|
{OFFSET(lcd_data4), (MODE(7) | PULLUDEN| PULLUP_EN)}, /* (V5) lcd_pclk.gpio2[10] */ /* SYSBOOT */
|
||||||
|
/* Bank 3 */
|
||||||
|
{OFFSET(mii1_rxdv), (MODE(7) | PULLUDDIS)}, /* (J17) gmii1_rxdv.gpio3[4] */ /* BT_EN */
|
||||||
|
{OFFSET(mii1_rxdv), (MODE(7) | PULLUDEN | PULLUP_EN | RXACTIVE)}, /* (K18) gmii1_txclk.gpio3[9] */ /* WLAN_IRQ */
|
||||||
|
{OFFSET(mii1_rxdv), (MODE(7) | PULLUDDIS)}, /* (L18) gmii1_rxclk.gpio3[10] */ /* WLAN_EN */
|
||||||
|
{OFFSET(mcasp0_ahclkr), (MODE(7) | PULLUDDIS)}, /* (C12) mcasp0_ahclkr.gpio3[17] */ /* WLAN_CLK (32k Linux only) */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux usb_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(usb0_drvvbus), (MODE(0) | PULLUDEN | PULLDOWN_EN)}, /* (F16) USB0_DRVVBUS.USB0_DRVVBUS */ /* PWM */
|
||||||
|
{OFFSET(usb1_drvvbus), (MODE(0) | PULLUDDIS | PULLDOWN_EN)}, /* (F15) USB1_DRVVBUS.USB1_DRVVBUS */ /* RST_PHY~ */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct module_pin_mux unused_netbird_pin_mux[] = {
|
||||||
|
{OFFSET(lcd_data6), (MODE(7) | PULLUDEN | PULLDOWN_EN)}, /* SYSBOOT6 is not used bulldown active, receiver disabled */
|
||||||
|
{OFFSET(lcd_data7), (MODE(7) | PULLUDEN | PULLDOWN_EN)}, /* SYSBOOT7 is not used bulldown active, receiver disabled */
|
||||||
|
{OFFSET(lcd_data10), (MODE(7) | PULLUDEN | PULLDOWN_EN)}, /* SYSBOOT10 is not used bulldown active, receiver disabled */
|
||||||
|
{OFFSET(lcd_data11), (MODE(7) | PULLUDEN | PULLDOWN_EN)}, /* SYSBOOT11 is not used bulldown active, receiver disabled */
|
||||||
|
{-1},
|
||||||
|
};
|
||||||
|
|
||||||
|
void enable_uart0_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(uart0_netbird_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_uart1_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(uart1_netbird_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_uart2_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(uart2_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_uart3_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(uart3_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_uart4_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(uart4_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_uart5_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(uart5_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
void enable_i2c0_pin_mux(void)
|
||||||
|
{
|
||||||
|
configure_module_pin_mux(i2c0_pin_mux);
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The AM335x GP EVM, if daughter card(s) are connected, can have 8
|
||||||
|
* different profiles. These profiles determine what peripherals are
|
||||||
|
* valid and need pinmux to be configured.
|
||||||
|
*/
|
||||||
|
#define PROFILE_NONE 0x0
|
||||||
|
#define PROFILE_0 (1 << 0)
|
||||||
|
#define PROFILE_1 (1 << 1)
|
||||||
|
#define PROFILE_2 (1 << 2)
|
||||||
|
#define PROFILE_3 (1 << 3)
|
||||||
|
#define PROFILE_4 (1 << 4)
|
||||||
|
#define PROFILE_5 (1 << 5)
|
||||||
|
#define PROFILE_6 (1 << 6)
|
||||||
|
#define PROFILE_7 (1 << 7)
|
||||||
|
#define PROFILE_MASK 0x7
|
||||||
|
#define PROFILE_ALL 0xFF
|
||||||
|
|
||||||
|
/* CPLD registers */
|
||||||
|
#define I2C_CPLD_ADDR 0x35
|
||||||
|
#define CFG_REG 0x10
|
||||||
|
|
||||||
|
void enable_board_pin_mux(void)
|
||||||
|
{
|
||||||
|
/* Netbird board */
|
||||||
|
configure_module_pin_mux(gpio_netbird_pin_mux);
|
||||||
|
configure_module_pin_mux(rmii1_netbird_pin_mux);
|
||||||
|
configure_module_pin_mux(mmc0_sdio_netbird_pin_mux);
|
||||||
|
configure_module_pin_mux(mmc1_emmc_netbird_pin_mux);
|
||||||
|
configure_module_pin_mux(usb_netbird_pin_mux);
|
||||||
|
configure_module_pin_mux(usb_netbird_pin_mux);
|
||||||
|
configure_module_pin_mux(i2c0_pin_mux);
|
||||||
|
configure_module_pin_mux(unused_netbird_pin_mux);
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,158 @@
|
||||||
|
/*
|
||||||
|
* Copyright (c) 2004-2008 Texas Instruments
|
||||||
|
*
|
||||||
|
* (C) Copyright 2002
|
||||||
|
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
|
||||||
|
*
|
||||||
|
* See file CREDITS for list of people who contributed to this
|
||||||
|
* project.
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation; either version 2 of
|
||||||
|
* the License, or (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program; if not, write to the Free Software
|
||||||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||||||
|
* MA 02111-1307 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
|
||||||
|
OUTPUT_ARCH(arm)
|
||||||
|
ENTRY(_start)
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
. = 0x00000000;
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
*(.__image_copy_start)
|
||||||
|
*(.vectors)
|
||||||
|
CPUDIR/start.o (.text*)
|
||||||
|
board/nm/netbird_v2/built-in.o (.text*)
|
||||||
|
*(.text*)
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.data : {
|
||||||
|
*(.data*)
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
. = .;
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
.u_boot_list : {
|
||||||
|
KEEP(*(SORT(.u_boot_list*)));
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
.__efi_runtime_start : {
|
||||||
|
*(.__efi_runtime_start)
|
||||||
|
}
|
||||||
|
|
||||||
|
.efi_runtime : {
|
||||||
|
*(efi_runtime_text)
|
||||||
|
*(efi_runtime_data)
|
||||||
|
}
|
||||||
|
|
||||||
|
.__efi_runtime_stop : {
|
||||||
|
*(.__efi_runtime_stop)
|
||||||
|
}
|
||||||
|
|
||||||
|
.efi_runtime_rel_start :
|
||||||
|
{
|
||||||
|
*(.__efi_runtime_rel_start)
|
||||||
|
}
|
||||||
|
|
||||||
|
.efi_runtime_rel : {
|
||||||
|
*(.relefi_runtime_text)
|
||||||
|
*(.relefi_runtime_data)
|
||||||
|
}
|
||||||
|
|
||||||
|
.efi_runtime_rel_stop :
|
||||||
|
{
|
||||||
|
*(.__efi_runtime_rel_stop)
|
||||||
|
}
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
|
||||||
|
.image_copy_end :
|
||||||
|
{
|
||||||
|
*(.__image_copy_end)
|
||||||
|
}
|
||||||
|
|
||||||
|
.rel_dyn_start :
|
||||||
|
{
|
||||||
|
*(.__rel_dyn_start)
|
||||||
|
}
|
||||||
|
|
||||||
|
.rel.dyn : {
|
||||||
|
*(.rel*)
|
||||||
|
}
|
||||||
|
|
||||||
|
.rel_dyn_end :
|
||||||
|
{
|
||||||
|
*(.__rel_dyn_end)
|
||||||
|
}
|
||||||
|
|
||||||
|
.hash : { *(.hash*) }
|
||||||
|
|
||||||
|
.end :
|
||||||
|
{
|
||||||
|
*(.__end)
|
||||||
|
}
|
||||||
|
|
||||||
|
_image_binary_end = .;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Deprecated: this MMU section is used by pxa at present but
|
||||||
|
* should not be used by new boards/CPUs.
|
||||||
|
*/
|
||||||
|
. = ALIGN(4096);
|
||||||
|
.mmutable : {
|
||||||
|
*(.mmutable)
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Compiler-generated __bss_start and __bss_end, see arch/arm/lib/bss.c
|
||||||
|
* __bss_base and __bss_limit are for linker only (overlay ordering)
|
||||||
|
*/
|
||||||
|
|
||||||
|
.bss_start __rel_dyn_start (OVERLAY) : {
|
||||||
|
KEEP(*(.__bss_start));
|
||||||
|
__bss_base = .;
|
||||||
|
}
|
||||||
|
|
||||||
|
.bss __bss_base (OVERLAY) : {
|
||||||
|
*(.bss*)
|
||||||
|
. = ALIGN(4);
|
||||||
|
__bss_limit = .;
|
||||||
|
}
|
||||||
|
|
||||||
|
.bss_end __bss_limit (OVERLAY) : {
|
||||||
|
KEEP(*(.__bss_end));
|
||||||
|
}
|
||||||
|
|
||||||
|
.dynsym _image_binary_end : { *(.dynsym) }
|
||||||
|
.dynbss : { *(.dynbss) }
|
||||||
|
.dynstr : { *(.dynstr*) }
|
||||||
|
.dynamic : { *(.dynamic*) }
|
||||||
|
.gnu.hash : { *(.gnu.hash) }
|
||||||
|
.plt : { *(.plt*) }
|
||||||
|
.interp : { *(.interp*) }
|
||||||
|
.gnu : { *(.gnu*) }
|
||||||
|
.ARM.exidx : { *(.ARM.exidx*) }
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,44 @@
|
||||||
|
CONFIG_ARM=y
|
||||||
|
CONFIG_TARGET_AM335X_NETBIRD_V2=y
|
||||||
|
CONFIG_SPL_STACK_R_ADDR=0x82000000
|
||||||
|
CONFIG_SPL=y
|
||||||
|
CONFIG_SPL_STACK_R=y
|
||||||
|
CONFIG_FIT=y
|
||||||
|
CONFIG_SYS_EXTRA_OPTIONS="EMMC_BOOT"
|
||||||
|
CONFIG_HUSH_PARSER=y
|
||||||
|
CONFIG_AUTOBOOT_KEYED=y
|
||||||
|
CONFIG_AUTOBOOT_PROMPT="Press s to abort autoboot in %d seconds\n"
|
||||||
|
CONFIG_AUTOBOOT_STOP_STR="s"
|
||||||
|
CONFIG_CMD_BOOTZ=y
|
||||||
|
# CONFIG_CMD_IMLS is not set
|
||||||
|
CONFIG_CMD_ASKENV=y
|
||||||
|
# CONFIG_CMD_FLASH is not set
|
||||||
|
CONFIG_CMD_MMC=y
|
||||||
|
CONFIG_CMD_SF=y
|
||||||
|
CONFIG_CMD_SPI=y
|
||||||
|
CONFIG_CMD_I2C=y
|
||||||
|
CONFIG_CMD_USB=y
|
||||||
|
CONFIG_CMD_DFU=y
|
||||||
|
CONFIG_CMD_GPIO=y
|
||||||
|
# CONFIG_CMD_SETEXPR is not set
|
||||||
|
CONFIG_CMD_DHCP=y
|
||||||
|
CONFIG_CMD_MII=y
|
||||||
|
CONFIG_CMD_PING=y
|
||||||
|
CONFIG_CMD_EXT2=y
|
||||||
|
CONFIG_CMD_EXT4=y
|
||||||
|
CONFIG_CMD_EXT4_WRITE=y
|
||||||
|
CONFIG_CMD_FAT=y
|
||||||
|
CONFIG_CMD_FS_GENERIC=y
|
||||||
|
CONFIG_DFU_TFTP=y
|
||||||
|
CONFIG_SPI_FLASH=y
|
||||||
|
CONFIG_SPI_FLASH_WINBOND=y
|
||||||
|
CONFIG_SYS_NS16550=y
|
||||||
|
CONFIG_USB=y
|
||||||
|
CONFIG_USB_MUSB_HOST=y
|
||||||
|
CONFIG_USB_MUSB_GADGET=y
|
||||||
|
CONFIG_USB_GADGET=y
|
||||||
|
CONFIG_USB_GADGET_DOWNLOAD=y
|
||||||
|
CONFIG_G_DNL_MANUFACTURER="Texas Instruments"
|
||||||
|
CONFIG_G_DNL_VENDOR_NUM=0x0451
|
||||||
|
CONFIG_G_DNL_PRODUCT_NUM=0xd022
|
||||||
|
CONFIG_OF_LIBFDT=y
|
||||||
|
|
@ -0,0 +1,217 @@
|
||||||
|
/*
|
||||||
|
* am335x_evm.h
|
||||||
|
*
|
||||||
|
* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
|
||||||
|
*
|
||||||
|
* This program is free software; you can redistribute it and/or
|
||||||
|
* modify it under the terms of the GNU General Public License as
|
||||||
|
* published by the Free Software Foundation version 2.
|
||||||
|
*
|
||||||
|
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
|
||||||
|
* kind, whether express or implied; without even the implied warranty
|
||||||
|
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __CONFIG_AM335X_NETBIRD_V2_H
|
||||||
|
#define __CONFIG_AM335X_NETBIRD_V2_H
|
||||||
|
|
||||||
|
#include <configs/ti_am335x_common.h>
|
||||||
|
|
||||||
|
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
|
||||||
|
#undef CONFIG_HW_WATCHDOG
|
||||||
|
#undef CONFIG_OMPAP_WATCHDOG
|
||||||
|
#undef CONFIG_SPL_WATCHDOG_SUPPORT
|
||||||
|
|
||||||
|
#ifndef CONFIG_SPL_BUILD
|
||||||
|
# define CONFIG_TIMESTAMP
|
||||||
|
# define CONFIG_LZO
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define CONFIG_SYS_BOOTM_LEN (16 << 20)
|
||||||
|
|
||||||
|
#define MACH_TYPE_TIAM335EVM 3589 /* Until the next sync */
|
||||||
|
#define CONFIG_MACH_TYPE MACH_TYPE_TIAM335EVM
|
||||||
|
#define CONFIG_BOARD_LATE_INIT
|
||||||
|
|
||||||
|
/* Clock Defines */
|
||||||
|
#define V_OSCK 0 /* 0 means detect from sysboot1 config */
|
||||||
|
#define V_SCLK (V_OSCK)
|
||||||
|
|
||||||
|
#include <config_distro_bootcmd.h>
|
||||||
|
|
||||||
|
#ifndef CONFIG_SPL_BUILD
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
"kernel_image=kernel.bin\0" \
|
||||||
|
"fdt_image=openwrt-nbhw16.dtb\0" \
|
||||||
|
"modeboot=sdboot\0" \
|
||||||
|
"fdt_addr=0x82000000\0" \
|
||||||
|
"kernel_addr=0x80000000\0" \
|
||||||
|
"load_addr=0x83000000\0" \
|
||||||
|
"root_part=1\0" /* Default root partition, overwritte in board/mv_ebu/a38x/nbhw14_env.c */ \
|
||||||
|
"add_sd_bootargs=setenv bootargs $bootargs root=/dev/mmcblk0p$root_part rootfstype=ext4 console=ttyO1,115200 rootwait earlyprintk\0" \
|
||||||
|
"add_version_bootargs=setenv bootargs $bootargs\0" \
|
||||||
|
"fdt_skip_update=yes\0" \
|
||||||
|
"ethprime=cpsw\0" \
|
||||||
|
"sdbringup=echo Try bringup boot && ext4load mmc 1:$root_part $kernel_addr /boot/zImage && " \
|
||||||
|
"ext4load mmc 1:$root_part $fdt_addr /boot/am335x-netbird-v2.dtb && setenv bootargs $bootargs rw;\0" \
|
||||||
|
"sdprod=ext4load mmc 1:$root_part $kernel_addr /boot/$kernel_image && " \
|
||||||
|
"ext4load mmc 1:$root_part $fdt_addr /boot/$fdt_image && setenv bootargs $bootargs ro;\0" \
|
||||||
|
"sdboot=if mmc dev 1; then echo Copying Linux from SD to RAM...; "\
|
||||||
|
"if test -e mmc 1:$root_part /boot/$kernel_image; then run sdprod; " \
|
||||||
|
"else run sdbringup; fi; " \
|
||||||
|
"run add_sd_bootargs; run add_version_bootargs; " \
|
||||||
|
"bootz $kernel_addr - $fdt_addr; fi\0" \
|
||||||
|
"bootcmd=run sdboot\0" \
|
||||||
|
"ipaddr=192.168.1.1\0" \
|
||||||
|
"serverip=192.168.1.254\0" \
|
||||||
|
"recovery=tftpboot $kernel_addr recovery-image; tftpboot $fdt_addr recovery-dtb; setenv bootargs rdinit=/etc/preinit console=ttyO0,115200 debug; bootz $kernel_addr - $fdt_addr\0"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* NS16550 Configuration */
|
||||||
|
#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */
|
||||||
|
#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */
|
||||||
|
#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */
|
||||||
|
#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */
|
||||||
|
#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */
|
||||||
|
#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */
|
||||||
|
#define CONFIG_BAUDRATE 115200
|
||||||
|
#define CONFIG_CONS_INDEX 2 /* Use UART1 as standard UART (1 = UART0) */
|
||||||
|
|
||||||
|
#define CONFIG_CMD_EEPROM
|
||||||
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */
|
||||||
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
||||||
|
#define CONFIG_SYS_I2C_SPEED 100000
|
||||||
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
|
||||||
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 50
|
||||||
|
|
||||||
|
#define CONFIG_ENV_IS_IN_EEPROM
|
||||||
|
#define CONFIG_ENV_OFFSET 0x1000 /* The Environment is located at 4k */
|
||||||
|
#define CONFIG_ENV_SIZE 0x800 /* The maximum size is 2k */
|
||||||
|
#undef CONFIG_SPL_ENV_SUPPORT
|
||||||
|
#undef CONFIG_SPL_NAND_SUPPORT
|
||||||
|
#undef CONFIG_SPL_ONENAND_SUPPORT
|
||||||
|
|
||||||
|
|
||||||
|
/* We need to disable SPI to not confuse the eeprom env driver */
|
||||||
|
#undef CONFIG_SPI
|
||||||
|
#undef CONFIG_SPI_BOOT
|
||||||
|
#undef CONFIG_SPL_OS_BOOT
|
||||||
|
|
||||||
|
#define CONFIG_SPL_POWER_SUPPORT
|
||||||
|
#define CONFIG_SPL_YMODEM_SUPPORT
|
||||||
|
|
||||||
|
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/am33xx/u-boot-spl.lds"
|
||||||
|
|
||||||
|
#define CONFIG_SUPPORT_EMMC_BOOT
|
||||||
|
|
||||||
|
/*
|
||||||
|
* USB configuration. We enable MUSB support, both for host and for
|
||||||
|
* gadget. We set USB0 as peripheral and USB1 as host, based on the
|
||||||
|
* board schematic and physical port wired to each. Then for host we
|
||||||
|
* add mass storage support and for gadget we add both RNDIS ethernet
|
||||||
|
* and DFU.
|
||||||
|
*/
|
||||||
|
#define CONFIG_USB_MUSB_DSPS
|
||||||
|
#define CONFIG_ARCH_MISC_INIT
|
||||||
|
#define CONFIG_USB_MUSB_PIO_ONLY
|
||||||
|
#define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
|
||||||
|
#define CONFIG_AM335X_USB0
|
||||||
|
#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
|
||||||
|
#define CONFIG_AM335X_USB1
|
||||||
|
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
|
||||||
|
|
||||||
|
/* Fastboot */
|
||||||
|
#define CONFIG_USB_FUNCTION_FASTBOOT
|
||||||
|
#define CONFIG_CMD_FASTBOOT
|
||||||
|
#define CONFIG_ANDROID_BOOT_IMAGE
|
||||||
|
#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
|
||||||
|
#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
|
||||||
|
|
||||||
|
/* To support eMMC booting */
|
||||||
|
#define CONFIG_STORAGE_EMMC
|
||||||
|
#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
|
||||||
|
|
||||||
|
#ifdef CONFIG_USB_MUSB_HOST
|
||||||
|
#define CONFIG_USB_STORAGE
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef CONFIG_USB_MUSB_GADGET
|
||||||
|
/* Removing USB gadget and can be enabled adter adding support usb DM */
|
||||||
|
#ifndef CONFIG_DM_ETH
|
||||||
|
#define CONFIG_USB_ETHER
|
||||||
|
#define CONFIG_USB_ETH_RNDIS
|
||||||
|
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
|
||||||
|
#endif /* CONFIG_DM_ETH */
|
||||||
|
#endif /* CONFIG_USB_MUSB_GADGET */
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Disable MMC DM for SPL build and can be re-enabled after adding
|
||||||
|
* DM support in SPL
|
||||||
|
*/
|
||||||
|
#ifdef CONFIG_SPL_BUILD
|
||||||
|
#undef CONFIG_DM_MMC
|
||||||
|
#undef CONFIG_TIMER
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if defined(CONFIG_SPL_BUILD)
|
||||||
|
/* Remove other SPL modes. */
|
||||||
|
#undef CONFIG_SPL_NAND_SUPPORT
|
||||||
|
#define CONFIG_ENV_IS_NOWHERE
|
||||||
|
#undef CONFIG_PARTITION_UUIDS
|
||||||
|
#undef CONFIG_EFI_PARTITION
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* USB Device Firmware Update support */
|
||||||
|
#ifndef CONFIG_SPL_BUILD
|
||||||
|
#define CONFIG_USB_FUNCTION_DFU
|
||||||
|
#define CONFIG_DFU_MMC
|
||||||
|
#define DFU_ALT_INFO_MMC \
|
||||||
|
"dfu_alt_info_mmc=" \
|
||||||
|
"boot part 0 1;" \
|
||||||
|
"rootfs part 0 2;" \
|
||||||
|
"MLO fat 0 1;" \
|
||||||
|
"MLO.raw raw 0x100 0x100;" \
|
||||||
|
"u-boot.img.raw raw 0x300 0x400;" \
|
||||||
|
"spl-os-args.raw raw 0x80 0x80;" \
|
||||||
|
"spl-os-image.raw raw 0x900 0x2000;" \
|
||||||
|
"spl-os-args fat 0 1;" \
|
||||||
|
"spl-os-image fat 0 1;" \
|
||||||
|
"u-boot.img fat 0 1;" \
|
||||||
|
"uEnv.txt fat 0 1\0"
|
||||||
|
#define DFU_ALT_INFO_NAND ""
|
||||||
|
#define CONFIG_DFU_RAM
|
||||||
|
#define DFU_ALT_INFO_RAM \
|
||||||
|
"dfu_alt_info_ram=" \
|
||||||
|
"kernel ram 0x80200000 0xD80000;" \
|
||||||
|
"fdt ram 0x80F80000 0x80000;" \
|
||||||
|
"ramdisk ram 0x81000000 0x4000000\0"
|
||||||
|
#define DFUARGS \
|
||||||
|
"dfu_alt_info_emmc=rawemmc raw 0 3751936\0" \
|
||||||
|
DFU_ALT_INFO_MMC \
|
||||||
|
DFU_ALT_INFO_RAM \
|
||||||
|
DFU_ALT_INFO_NAND
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Network. */
|
||||||
|
#define CONFIG_PHY_GIGE
|
||||||
|
#define CONFIG_PHYLIB
|
||||||
|
#define CONFIG_PHY_SMSC
|
||||||
|
|
||||||
|
#ifdef CONFIG_DRIVER_TI_CPSW
|
||||||
|
#define CONFIG_CLOCK_SYNTHESIZER
|
||||||
|
#define CLK_SYNTHESIZER_I2C_ADDR 0x65
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MEMTEST_START 0x80000000
|
||||||
|
#define CONFIG_SYS_MEMTEST_END 0x87900000
|
||||||
|
|
||||||
|
/* Enable support for TPS 65218 */
|
||||||
|
#define CONFIG_POWER
|
||||||
|
#define CONFIG_POWER_I2C
|
||||||
|
#define CONFIG_POWER_TPS65218
|
||||||
|
/* For compatibility reasons (BeagleBone) */
|
||||||
|
#define CONFIG_POWER_TPS65217
|
||||||
|
#define CONFIG_POWER_TPS62362
|
||||||
|
|
||||||
|
#endif /* ! __CONFIG_AM335X_NETBIRD_V2_H */
|
||||||
Loading…
Reference in New Issue