LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm: Remove spear600 boards and the rest of SPEAr support 

These boards have not been converted to CONFIG_DM_USB by the deadline
and is also missing conversion to CONFIG_DM.  Remove them.  As this is
the last of the SPEAr platforms, so remove the rest of the remaining
support as well.

Cc: Vipin Kumar <vipin.kumar@st.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
This commit is contained in:
Tom Rini 2021-05-22 08:47:14 -04:00
parent d7221d0d66
commit 570c3dcfc1
51 changed files with 0 additions and 3912 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
Makefile
View File

@ -1561,22 +1561,11 @@ u-boot-signed.sb: u-boot.bin spl/u-boot-spl.bin
u-boot.sb: u-boot.bin spl/u-boot-spl.bin u-boot.sb: u-boot.bin spl/u-boot-spl.bin
$(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs u-boot.sb
# On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
# Both images are created using mkimage (crc etc), so that the ROM
# bootloader can check its integrity. Padding needs to be done to the
# SPL image (with mkimage header) and not the binary. Otherwise the resulting image
# which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
# The resulting image containing both U-Boot images is called u-boot.spr
MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \ MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
-a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage) $(call if_changed,mkimage)
OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
--gap-fill=0xff
u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
$(call if_changed,pad_cat)
ifneq ($(CONFIG_ARCH_SOCFPGA),) ifneq ($(CONFIG_ARCH_SOCFPGA),)
quiet_cmd_gensplx4 = GENSPLX4 $@ quiet_cmd_gensplx4 = GENSPLX4 $@
cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \ cmd_gensplx4 = $(OBJCOPY) -I binary -O binary --gap-fill=0x0 \

18
arch/arm/Kconfig
View File

@ -566,14 +566,6 @@ config ARCH_ORION5X
select CPU_ARM926EJS select CPU_ARM926EJS
select GPIO_EXTRA_HEADER select GPIO_EXTRA_HEADER
config TARGET_SPEAR600
bool "Support spear600"
select BOARD_EARLY_INIT_F
select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
select PL011_SERIAL
imply CMD_SAVES
config TARGET_STV0991 config TARGET_STV0991
bool "Support stv0991" bool "Support stv0991"
select CPU_V7A select CPU_V7A
@ -587,14 +579,6 @@ config TARGET_STV0991
select SPI_FLASH select SPI_FLASH
imply CMD_DM imply CMD_DM
config TARGET_X600
bool "Support x600"
select BOARD_LATE_INIT
select CPU_ARM926EJS
select GPIO_EXTRA_HEADER
select PL011_SERIAL
select SUPPORT_SPL
config TARGET_FLEA3 config TARGET_FLEA3
bool "Support flea3" bool "Support flea3"
select CPU_ARM1136 select CPU_ARM1136
@ -2098,8 +2082,6 @@ source "board/kontron/sl28/Kconfig"
source "board/myir/mys_6ulx/Kconfig" source "board/myir/mys_6ulx/Kconfig"
source "board/seeed/npi_imx6ull/Kconfig" source "board/seeed/npi_imx6ull/Kconfig"
source "board/socionext/developerbox/Kconfig" source "board/socionext/developerbox/Kconfig"
source "board/spear/spear600/Kconfig"
source "board/spear/x600/Kconfig"
source "board/st/stv0991/Kconfig" source "board/st/stv0991/Kconfig"
source "board/tcl/sl50/Kconfig" source "board/tcl/sl50/Kconfig"
source "board/toradex/colibri_pxa270/Kconfig" source "board/toradex/colibri_pxa270/Kconfig"

21
arch/arm/cpu/arm926ejs/spear/Makefile
View File

@ -1,21 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y := cpu.o \
reset.o \
timer.o
ifdef CONFIG_SPL_BUILD
obj-y += spl.o
obj-$(CONFIG_SPEAR600) += spear600.o
obj-$(CONFIG_DDR_MT47H64M16) += spr600_mt47h64m16_3_333_cl5_psync.o
obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_333_cl5_psync.o
obj-$(CONFIG_DDR_MT47H32M16) += spr600_mt47h32m16_37e_166_cl4_sync.o
obj-$(CONFIG_DDR_MT47H128M8) += spr600_mt47h128m8_3_266_cl5_async.o
else
obj-y += spr_misc.o spr_lowlevel_init.o
endif
extra-$(CONFIG_SPL_BUILD) := start.o

108
arch/arm/cpu/arm926ejs/spear/cpu.c
View File

@ -1,108 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#include <common.h>
#include <command.h>
#include <init.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_misc.h>
int arch_cpu_init(void)
{
struct misc_regs *const misc_p =
(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 periph1_clken, periph_clk_cfg;
periph1_clken = readl(&misc_p->periph1_clken);
#if defined(CONFIG_SPEAR600)
periph1_clken |= MISC_GPT3ENB;
#endif
#if defined(CONFIG_PL011_SERIAL)
periph1_clken |= MISC_UART0ENB;
periph_clk_cfg = readl(&misc_p->periph_clk_cfg);
periph_clk_cfg &= ~CONFIG_SPEAR_UARTCLKMSK;
periph_clk_cfg |= CONFIG_SPEAR_UART48M;
writel(periph_clk_cfg, &misc_p->periph_clk_cfg);
#endif
#if defined(CONFIG_ETH_DESIGNWARE)
periph1_clken |= MISC_ETHENB;
#endif
#if defined(CONFIG_DW_UDC)
periph1_clken |= MISC_USBDENB;
#endif
#if defined(CONFIG_SYS_I2C_DW)
periph1_clken |= MISC_I2CENB;
#endif
#if defined(CONFIG_ST_SMI)
periph1_clken |= MISC_SMIENB;
#endif
#if defined(CONFIG_NAND_FSMC)
periph1_clken |= MISC_FSMCENB;
#endif
#if defined(CONFIG_USB_EHCI_SPEAR)
periph1_clken |= PERIPH_USBH1 | PERIPH_USBH2;
#endif
#if defined(CONFIG_SPEAR_GPIO)
periph1_clken |= MISC_GPIO3ENB | MISC_GPIO4ENB;
#endif
#if defined(CONFIG_PL022_SPI)
periph1_clken |= MISC_SSP1ENB | MISC_SSP2ENB | MISC_SSP3ENB;
#endif
writel(periph1_clken, &misc_p->periph1_clken);
return 0;
}
#ifdef CONFIG_DISPLAY_CPUINFO
int print_cpuinfo(void)
{
#if defined(CONFIG_SPEAR600)
printf("CPU: SPEAr600\n");
#else
#error CPU not supported in spear platform
#endif
return 0;
}
#endif
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_NAND_ECC_BCH) && defined(CONFIG_NAND_FSMC)
static int do_switch_ecc(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
if (argc != 2)
goto usage;
if (strncmp(argv[1], "hw", 2) == 0) {
/* 1-bit HW ECC */
printf("Switching to 1-bit HW ECC\n");
fsmc_nand_switch_ecc(1);
} else if (strncmp(argv[1], "bch4", 2) == 0) {
/* 4-bit SW ECC BCH4 */
printf("Switching to 4-bit SW ECC (BCH4)\n");
fsmc_nand_switch_ecc(4);
} else {
goto usage;
}
return 0;
usage:
printf("Usage: nandecc %s\n", cmdtp->usage);
return 1;
}
U_BOOT_CMD(
nandecc, 2, 0, do_switch_ecc,
"switch NAND ECC calculation algorithm",
"hw|bch4 - Switch between NAND hardware 1-bit HW and"
" 4-bit SW BCH\n"
);
#endif

39
arch/arm/cpu/arm926ejs/spear/reset.c
View File

@ -1,39 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#include <common.h>
#include <cpu_func.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_syscntl.h>
#include <linux/delay.h>
void reset_cpu(void)
{
struct syscntl_regs *syscntl_regs_p =
(struct syscntl_regs *)CONFIG_SPEAR_SYSCNTLBASE;
printf("System is going to reboot ...\n");
/*
* This 1 second delay will allow the above message
* to be printed before reset
*/
udelay((1000 * 1000));
/* Going into slow mode before resetting SOC */
writel(0x02, &syscntl_regs_p->scctrl);
/*
* Writing any value to the system status register will
* reset the SoC
*/
writel(0x00, &syscntl_regs_p->scsysstat);
/* system will restart */
while (1)
;
}

223
arch/arm/cpu/arm926ejs/spear/spear600.c
View File

@ -1,223 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2009
* Viresh Kumar, ST Microelectronics, viresh.kumar@st.com
* Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
*/
#include <common.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/arch/spr_misc.h>
#include <asm/arch/spr_defs.h>
void spear_late_init(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
writel(0x80000007, &misc_p->arb_icm_ml1);
writel(0x80000007, &misc_p->arb_icm_ml2);
writel(0x80000007, &misc_p->arb_icm_ml3);
writel(0x80000007, &misc_p->arb_icm_ml4);
writel(0x80000007, &misc_p->arb_icm_ml5);
writel(0x80000007, &misc_p->arb_icm_ml6);
writel(0x80000007, &misc_p->arb_icm_ml7);
writel(0x80000007, &misc_p->arb_icm_ml8);
writel(0x80000007, &misc_p->arb_icm_ml9);
}
static void sel_1v8(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 ddr1v8, ddr2v5;
ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
ddr2v5 &= 0x8080ffc0;
ddr2v5 |= 0x78000003;
writel(ddr2v5, &misc_p->ddr_2v5_compensation);
ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
ddr1v8 &= 0x8080ffc0;
ddr1v8 |= 0x78000010;
writel(ddr1v8, &misc_p->ddr_1v8_compensation);
while (!(readl(&misc_p->ddr_1v8_compensation) & DDR_COMP_ACCURATE))
;
}
static void sel_2v5(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 ddr1v8, ddr2v5;
ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
ddr1v8 &= 0x8080ffc0;
ddr1v8 |= 0x78000003;
writel(ddr1v8, &misc_p->ddr_1v8_compensation);
ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
ddr2v5 &= 0x8080ffc0;
ddr2v5 |= 0x78000010;
writel(ddr2v5, &misc_p->ddr_2v5_compensation);
while (!(readl(&misc_p->ddr_2v5_compensation) & DDR_COMP_ACCURATE))
;
}
/*
* plat_ddr_init:
*/
void plat_ddr_init(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 ddrpad;
u32 core3v3, ddr1v8, ddr2v5;
/* DDR pad register configurations */
ddrpad = readl(&misc_p->ddr_pad);
ddrpad &= ~DDR_PAD_CNF_MSK;
#if (CONFIG_DDR_HCLK)
ddrpad |= 0xEAAB;
#elif (CONFIG_DDR_2HCLK)
ddrpad |= 0xEAAD;
#elif (CONFIG_DDR_PLL2)
ddrpad |= 0xEAAD;
#endif
writel(ddrpad, &misc_p->ddr_pad);
/* Compensation register configurations */
core3v3 = readl(&misc_p->core_3v3_compensation);
core3v3 &= 0x8080ffe0;
core3v3 |= 0x78000002;
writel(core3v3, &misc_p->core_3v3_compensation);
ddr1v8 = readl(&misc_p->ddr_1v8_compensation);
ddr1v8 &= 0x8080ffc0;
ddr1v8 |= 0x78000004;
writel(ddr1v8, &misc_p->ddr_1v8_compensation);
ddr2v5 = readl(&misc_p->ddr_2v5_compensation);
ddr2v5 &= 0x8080ffc0;
ddr2v5 |= 0x78000004;
writel(ddr2v5, &misc_p->ddr_2v5_compensation);
if ((readl(&misc_p->ddr_pad) & DDR_PAD_SW_CONF) == DDR_PAD_SW_CONF) {
/* Software memory configuration */
if (readl(&misc_p->ddr_pad) & DDR_PAD_SSTL_SEL)
sel_1v8();
else
sel_2v5();
} else {
/* Hardware memory configuration */
if (readl(&misc_p->ddr_pad) & DDR_PAD_DRAM_TYPE)
sel_1v8();
else
sel_2v5();
}
}
/*
* xxx_boot_selected:
*
* return true if the particular booting option is selected
* return false otherwise
*/
static u32 read_bootstrap(void)
{
return (readl(CONFIG_SPEAR_BOOTSTRAPCFG) >> CONFIG_SPEAR_BOOTSTRAPSHFT)
& CONFIG_SPEAR_BOOTSTRAPMASK;
}
int snor_boot_selected(void)
{
u32 bootstrap = read_bootstrap();
if (SNOR_BOOT_SUPPORTED) {
/* Check whether SNOR boot is selected */
if ((bootstrap & CONFIG_SPEAR_ONLYSNORBOOT) ==
CONFIG_SPEAR_ONLYSNORBOOT)
return true;
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND8BOOT)
return true;
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND16BOOT)
return true;
}
return false;
}
int nand_boot_selected(void)
{
u32 bootstrap = read_bootstrap();
if (NAND_BOOT_SUPPORTED) {
/* Check whether NAND boot is selected */
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND8BOOT)
return true;
if ((bootstrap & CONFIG_SPEAR_NORNANDBOOT) ==
CONFIG_SPEAR_NORNAND16BOOT)
return true;
}
return false;
}
int pnor_boot_selected(void)
{
/* Parallel NOR boot is not selected in any SPEAr600 revision */
return false;
}
int usb_boot_selected(void)
{
u32 bootstrap = read_bootstrap();
if (USB_BOOT_SUPPORTED) {
/* Check whether USB boot is selected */
if (!(bootstrap & CONFIG_SPEAR_USBBOOT))
return true;
}
return false;
}
int tftp_boot_selected(void)
{
/* TFTP boot is not selected in any SPEAr600 revision */
return false;
}
int uart_boot_selected(void)
{
/* UART boot is not selected in any SPEAr600 revision */
return false;
}
int spi_boot_selected(void)
{
/* SPI boot is not selected in any SPEAr600 revision */
return false;
}
int i2c_boot_selected(void)
{
/* I2C boot is not selected in any SPEAr600 revision */
return false;
}
int mmc_boot_selected(void)
{
return false;
}
void plat_late_init(void)
{
spear_late_init();
}

296
arch/arm/cpu/arm926ejs/spear/spl.c
View File

@ -1,296 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2011
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <init.h>
#include <spl.h>
#include <version.h>
#include <asm/io.h>
#include <asm/ptrace.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_defs.h>
#include <asm/arch/spr_misc.h>
#include <asm/arch/spr_syscntl.h>
#include <linux/mtd/st_smi.h>
/* Reserve some space to store the BootROM's stack pointer during SPL operation.
* The BSS cannot be used for this purpose because it will be zeroed after
* having stored the pointer, so force the location to the data section.
*/
u32 bootrom_stash_sp __section(".data");
static void ddr_clock_init(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 clkenb, ddrpll;
clkenb = readl(&misc_p->periph1_clken);
clkenb &= ~PERIPH_MPMCMSK;
clkenb |= PERIPH_MPMC_WE;
/* Intentionally done twice */
writel(clkenb, &misc_p->periph1_clken);
writel(clkenb, &misc_p->periph1_clken);
ddrpll = readl(&misc_p->pll_ctr_reg);
ddrpll &= ~MEM_CLK_SEL_MSK;
#if (CONFIG_DDR_HCLK)
ddrpll |= MEM_CLK_HCLK;
#elif (CONFIG_DDR_2HCLK)
ddrpll |= MEM_CLK_2HCLK;
#elif (CONFIG_DDR_PLL2)
ddrpll |= MEM_CLK_PLL2;
#else
#error "please define one of CONFIG_DDR_(HCLK|2HCLK|PLL2)"
#endif
writel(ddrpll, &misc_p->pll_ctr_reg);
writel(readl(&misc_p->periph1_clken) | PERIPH_MPMC_EN,
&misc_p->periph1_clken);
}
static void mpmc_init_values(void)
{
u32 i;
u32 *mpmc_reg_p = (u32 *)CONFIG_SPEAR_MPMCBASE;
u32 *mpmc_val_p = &mpmc_conf_vals[0];
for (i = 0; i < CONFIG_SPEAR_MPMCREGS; i++, mpmc_reg_p++, mpmc_val_p++)
writel(*mpmc_val_p, mpmc_reg_p);
mpmc_reg_p = (u32 *)CONFIG_SPEAR_MPMCBASE;
/*
* MPMC controller start
* MPMC waiting for DLLLOCKREG high
*/
writel(0x01000100, &mpmc_reg_p[7]);
while (!(readl(&mpmc_reg_p[3]) & 0x10000))
;
}
static void mpmc_init(void)
{
/* Clock related settings for DDR */
ddr_clock_init();
/*
* DDR pad register bits are different for different SoCs
* Compensation values are also handled separately
*/
plat_ddr_init();
/* Initialize mpmc register values */
mpmc_init_values();
}
static void pll_init(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
/* Initialize PLLs */
writel(FREQ_332, &misc_p->pll1_frq);
writel(0x1C0A, &misc_p->pll1_cntl);
writel(0x1C0E, &misc_p->pll1_cntl);
writel(0x1C06, &misc_p->pll1_cntl);
writel(0x1C0E, &misc_p->pll1_cntl);
writel(FREQ_332, &misc_p->pll2_frq);
writel(0x1C0A, &misc_p->pll2_cntl);
writel(0x1C0E, &misc_p->pll2_cntl);
writel(0x1C06, &misc_p->pll2_cntl);
writel(0x1C0E, &misc_p->pll2_cntl);
/* wait for pll locks */
while (!(readl(&misc_p->pll1_cntl) & 0x1))
;
while (!(readl(&misc_p->pll2_cntl) & 0x1))
;
}
static void mac_init(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
writel(readl(&misc_p->periph1_clken) & (~PERIPH_GMAC),
&misc_p->periph1_clken);
writel(SYNTH23, &misc_p->gmac_synth_clk);
switch (get_socrev()) {
case SOC_SPEAR600_AA:
case SOC_SPEAR600_AB:
case SOC_SPEAR600_BA:
case SOC_SPEAR600_BB:
case SOC_SPEAR600_BC:
case SOC_SPEAR600_BD:
writel(0x0, &misc_p->gmac_ctr_reg);
break;
case SOC_SPEAR300:
case SOC_SPEAR310:
case SOC_SPEAR320:
writel(0x4, &misc_p->gmac_ctr_reg);
break;
}
writel(readl(&misc_p->periph1_clken) | PERIPH_GMAC,
&misc_p->periph1_clken);
writel(readl(&misc_p->periph1_rst) | PERIPH_GMAC,
&misc_p->periph1_rst);
writel(readl(&misc_p->periph1_rst) & (~PERIPH_GMAC),
&misc_p->periph1_rst);
}
static void sys_init(void)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
struct syscntl_regs *syscntl_p =
(struct syscntl_regs *)CONFIG_SPEAR_SYSCNTLBASE;
/* Set system state to SLOW */
writel(SLOW, &syscntl_p->scctrl);
writel(PLL_TIM << 3, &syscntl_p->scpllctrl);
/* Initialize PLLs */
pll_init();
/*
* Ethernet configuration
* To be done only if the tftp boot is not selected already
* Boot code ensures the correct configuration in tftp booting
*/
if (!tftp_boot_selected())
mac_init();
writel(RTC_DISABLE | PLLTIMEEN, &misc_p->periph_clk_cfg);
writel(0x555, &misc_p->amba_clk_cfg);
writel(NORMAL, &syscntl_p->scctrl);
/* Wait for system to switch to normal mode */
while (((readl(&syscntl_p->scctrl) >> MODE_SHIFT) & MODE_MASK)
!= NORMAL)
;
}
/*
* get_socrev
*
* Get SoC Revision.
* @return SOC_SPEARXXX
*/
int get_socrev(void)
{
#if defined(CONFIG_SPEAR600)
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 soc_id = readl(&misc_p->soc_core_id);
u32 pri_socid = (soc_id >> SOC_PRI_SHFT) & 0xFF;
u32 sec_socid = (soc_id >> SOC_SEC_SHFT) & 0xFF;
if ((pri_socid == 'B') && (sec_socid == 'B'))
return SOC_SPEAR600_BB;
else if ((pri_socid == 'B') && (sec_socid == 'C'))
return SOC_SPEAR600_BC;
else if ((pri_socid == 'B') && (sec_socid == 'D'))
return SOC_SPEAR600_BD;
else if (soc_id == 0)
return SOC_SPEAR600_BA;
else
return SOC_SPEAR_NA;
#endif
}
/*
* SNOR (Serial NOR flash) related functions
*/
static void snor_init(void)
{
struct smi_regs *const smicntl =
(struct smi_regs * const)CONFIG_SYS_SMI_BASE;
/* Setting the fast mode values. SMI working at 166/4 = 41.5 MHz */
writel(HOLD1 | FAST_MODE | BANK_EN | DSEL_TIME | PRESCAL4,
&smicntl->smi_cr1);
}
u32 spl_boot_device(void)
{
u32 mode = 0;
if (usb_boot_selected()) {
mode = BOOT_DEVICE_BOOTROM;
} else if (snor_boot_selected()) {
/* SNOR-SMI initialization */
snor_init();
mode = BOOT_DEVICE_NOR;
}
return mode;
}
void board_boot_order(u32 *spl_boot_list)
{
spl_boot_list[0] = spl_boot_device();
/*
* If the main boot device (eg. NOR) is empty, try to jump back into the
* BootROM for USB boot process.
*/
if (USB_BOOT_SUPPORTED)
spl_boot_list[1] = BOOT_DEVICE_BOOTROM;
}
void board_init_f(ulong dummy)
{
struct misc_regs *misc_p = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
/* Initialize PLLs */
sys_init();
preloader_console_init();
arch_cpu_init();
/* Enable IPs (release reset) */
writel(PERIPH_RST_ALL, &misc_p->periph1_rst);
/* Initialize MPMC */
puts("Configure DDR\n");
mpmc_init();
spear_late_init();
}
/*
* In a few cases (Ethernet, UART or USB boot, we might want to go back into the
* BootROM code right after having initialized a few components like the DRAM).
* The following function is called from SPL common code (board_init_r).
*/
int board_return_to_bootrom(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
/*
* Retrieve the BootROM's stack pointer and jump back to the start of
* the SPL, where we can easily branch back into the BootROM. Don't do
* it right here because SPL might be compiled in Thumb mode while the
* BootROM expects ARM mode.
*/
asm volatile ("ldr r0, =bootrom_stash_sp;"
"ldr r0, [r0];"
"mov sp, r0;"
#if defined(CONFIG_SPL_SYS_THUMB_BUILD)
"blx back_to_bootrom;"
#else
"bl back_to_bootrom;"
#endif
);
return 0;
}

113
arch/arm/cpu/arm926ejs/spear/spr600_mt47h128m8_3_266_cl5_async.c
View File

@ -1,113 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2009
* Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
*/
#include <common.h>
#if (CONFIG_DDR_PLL2)
const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
0x00000001,
0x00000000,
0x01000000,
0x00000101,
0x00000001,
0x01000000,
0x00010001,
0x00000100,
0x00010001,
0x00000003,
0x01000201,
0x06000202,
0x06060106,
0x03050502,
0x03040404,
0x02020503,
0x02010106,
0x03000404,
0x02030202,
0x03000204,
0x0707073f,
0x07070707,
0x06060607,
0x06060606,
0x05050506,
0x05050505,
0x04040405,
0x04040404,
0x03030304,
0x03030303,
0x02020203,
0x02020202,
0x01010102,
0x01010101,
0x08080a01,
0x0000023f,
0x00040800,
0x00000000,
0x00000f02,
0x00001b1b,
0x7f000000,
0x005f0000,
0x1c040b6a,
0x00640064,
0x00640064,
0x00640064,
0x00000064,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x000007ff,
0x00000000,
0x47ec00c8,
0x00c8001f,
0x00000000,
0x0000cd98,
0x00000000,
0x03030100,
0x03030303,
0x03030303,
0x03030303,
0x00270000,
0x00250027,
0x00300000,
0x008900b7,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
};
#endif

118
arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_333_cl5_psync.c
View File

@ -1,118 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2009
* Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
*/
#include <common.h>
#if (CONFIG_DDR_PLL2 || CONFIG_DDR_2HCLK)
const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
#if (CONFIG_DDR_PLL2)
0x00000001,
0x00000000,
#elif (CONFIG_DDR_2HCLK)
0x02020201,
0x02020202,
#endif
0x01000000,
0x00000101,
0x00000101,
0x01000000,
0x00010001,
0x00000100,
0x01010001,
0x00000201,
0x01000101,
0x06000002,
0x06060106,
0x03050502,
0x03040404,
0x02020503,
0x02010106,
0x03000405,
0x03040202,
0x04000305,
0x0707073f,
0x07070707,
0x06060607,
0x06060606,
0x05050506,
0x05050505,
0x04040405,
0x04040404,
0x03030304,
0x03030303,
0x02020203,
0x02020202,
0x01010102,
0x01010101,
0x0a0a0a01,
0x0000023f,
0x00050a00,
0x11000000,
0x00001302,
0x00000A0A,
0x72000000,
0x00550000,
0x2b050e86,
0x00640064,
0x00640064,
0x00640064,
0x00000064,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00000a24,
0x43C20000,
0x5b1c00c8,
0x00c8002e,
0x00000000,
0x0001046b,
0x00000000,
0x03030100,
0x03030303,
0x03030303,
0x03030303,
0x00210000,
0x00010021,
0x00200000,
0x006c0090,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
};
#endif

113
arch/arm/cpu/arm926ejs/spear/spr600_mt47h32m16_37e_166_cl4_sync.c
View File

@ -1,113 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2009
* Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
*/
#include <common.h>
#if (CONFIG_DDR_HCLK)
const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
0x03030301,
0x03030303,
0x01000000,
0x00000101,
0x00000001,
0x01000000,
0x00010001,
0x00000100,
0x00010001,
0x00000003,
0x01000201,
0x06000202,
0x06060106,
0x03050502,
0x03040404,
0x02020503,
0x02010106,
0x03000404,
0x02020202,
0x03000203,
0x0707073f,
0x07070707,
0x06060607,
0x06060606,
0x05050506,
0x05050505,
0x04040405,
0x04040404,
0x03030304,
0x03030303,
0x02020203,
0x02020202,
0x01010102,
0x01010101,
0x08080a01,
0x0000023f,
0x00030600,
0x00000000,
0x00000a02,
0x00001c1c,
0x7f000000,
0x005f0000,
0x12030743,
0x00640064,
0x00640064,
0x00640064,
0x00000064,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x0000050e,
0x00000000,
0x2d8900c8,
0x00c80014,
0x00000000,
0x00008236,
0x00000000,
0x03030100,
0x03030303,
0x03030303,
0x03030303,
0x00400000,
0x003a0040,
0x00680000,
0x00d80120,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
};
#endif

127
arch/arm/cpu/arm926ejs/spear/spr600_mt47h64m16_3_333_cl5_psync.c
View File

@ -1,127 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2000-2009
* Vipin Kumar, ST Microelectronics, vipin.kumar@st.com
*/
#include <common.h>
#if (CONFIG_DDR_PLL2 || CONFIG_DDR_2HCLK)
const u32 mpmc_conf_vals[CONFIG_SPEAR_MPMCREGS] = {
#if (CONFIG_DDR_PLL2)
0x00000001,
0x00000000,
#elif (CONFIG_DDR_2HCLK)
0x02020201,
0x02020202,
#endif
0x01000000,
0x00000101,
0x00000101,
0x01000000,
0x00010001,
0x00000100,
0x01010001,
0x00000201,
0x01000101,
0x06000002,
0x06060106,
0x03050502,
0x03040404,
0x02020503,
#ifdef CONFIG_X600
0x02030206,
#else
0x02010106,
#endif
0x03000405,
0x03040202,
0x04000305,
0x0707073f,
0x07070707,
0x06060607,
0x06060606,
0x05050506,
0x05050505,
0x04040405,
0x04040404,
0x03030304,
0x03030303,
0x02020203,
0x02020202,
0x01010102,
0x01010101,
0x0a0a0a01,
0x0000023f,
0x00050a00,
0x11000000,
0x00001302,
0x00000A0A,
#ifdef CONFIG_X600
0x7f000000,
0x005c0000,
#else
0x72000000,
0x00550000,
#endif
0x2b050e86,
0x00640064,
0x00640064,
0x00640064,
0x00000064,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00200020,
0x00000a24,
0x43C20000,
0x5b1c00c8,
0x00c8002e,
0x00000000,
0x0001046b,
0x00000000,
0x03030100,
0x03030303,
0x03030303,
0x03030303,
0x00210000,
0x00010021,
0x00200000,
0x006c0090,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x003fffff,
0x003fffff,
0x00000000,
0x00000000,
0x00000000,
0x00000000,
0x00000000
};
#endif

173
arch/arm/cpu/arm926ejs/spear/spr_lowlevel_init.S
View File

@ -1,173 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2006
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#include <config.h>
/*
* platform specific initializations are already done in Xloader
* Initializations already done include
* DDR, PLLs, IP's clock enable and reset release etc
*/
.globl lowlevel_init
lowlevel_init:
mov pc, lr
/* void setfreq(unsigned int device, unsigned int frequency) */
.global setfreq
setfreq:
stmfd sp!,{r14}
stmfd sp!,{r0-r12}
mov r8,sp
ldr sp,SRAM_STACK_V
/* Saving the function arguements for later use */
mov r4,r0
mov r5,r1
/* Putting DDR into self refresh */
ldr r0,DDR_07_V
ldr r1,[r0]
ldr r2,DDR_ACTIVE_V
bic r1, r1, r2
str r1,[r0]
ldr r0,DDR_57_V
ldr r1,[r0]
ldr r2,CYCLES_MASK_V
bic r1, r1, r2
ldr r2,REFRESH_CYCLES_V
orr r1, r1, r2, lsl #16
str r1,[r0]
ldr r0,DDR_07_V
ldr r1,[r0]
ldr r2,SREFRESH_MASK_V
orr r1, r1, r2
str r1,[r0]
/* flush pipeline */
b flush
.align 5
flush:
/* Delay to ensure self refresh mode */
ldr r0,SREFRESH_DELAY_V
delay:
sub r0,r0,#1
cmp r0,#0
bne delay
/* Putting system in slow mode */
ldr r0,SCCTRL_V
mov r1,#2
str r1,[r0]
/* Changing PLL(1/2) frequency */
mov r0,r4
mov r1,r5
cmp r4,#0
beq pll1_freq
/* Change PLL2 (DDR frequency) */
ldr r6,PLL2_FREQ_V
ldr r7,PLL2_CNTL_V
b pll2_freq
pll1_freq:
/* Change PLL1 (CPU frequency) */
ldr r6,PLL1_FREQ_V
ldr r7,PLL1_CNTL_V
pll2_freq:
mov r0,r6
ldr r1,[r0]
ldr r2,PLLFREQ_MASK_V
bic r1,r1,r2
mov r2,r5,lsr#1
orr r1,r1,r2,lsl#24
str r1,[r0]
mov r0,r7
ldr r1,P1C0A_V
str r1,[r0]
ldr r1,P1C0E_V
str r1,[r0]
ldr r1,P1C06_V
str r1,[r0]
ldr r1,P1C0E_V
str r1,[r0]
lock:
ldr r1,[r0]
and r1,r1,#1
cmp r1,#0
beq lock
/* Putting system back to normal mode */
ldr r0,SCCTRL_V
mov r1,#4
str r1,[r0]
/* Putting DDR back to normal */
ldr r0,DDR_07_V
ldr r1,[R0]
ldr r2,SREFRESH_MASK_V
bic r1, r1, r2
str r1,[r0]
ldr r2,DDR_ACTIVE_V
orr r1, r1, r2
str r1,[r0]
/* Delay to ensure self refresh mode */
ldr r0,SREFRESH_DELAY_V
1:
sub r0,r0,#1
cmp r0,#0
bne 1b
mov sp,r8
/* Resuming back to code */
ldmia sp!,{r0-r12}
ldmia sp!,{pc}
SCCTRL_V:
.word 0xfca00000
PLL1_FREQ_V:
.word 0xfca8000C
PLL1_CNTL_V:
.word 0xfca80008
PLL2_FREQ_V:
.word 0xfca80018
PLL2_CNTL_V:
.word 0xfca80014
PLLFREQ_MASK_V:
.word 0xff000000
P1C0A_V:
.word 0x1C0A
P1C0E_V:
.word 0x1C0E
P1C06_V:
.word 0x1C06
SREFRESH_DELAY_V:
.word 0x9999
SRAM_STACK_V:
.word 0xD2800600
DDR_07_V:
.word 0xfc60001c
DDR_ACTIVE_V:
.word 0x01000000
DDR_57_V:
.word 0xfc6000e4
CYCLES_MASK_V:
.word 0xffff0000
REFRESH_CYCLES_V:
.word 0xf0f0
SREFRESH_MASK_V:
.word 0x00010000
.global setfreq_sz
setfreq_sz:
.word setfreq_sz - setfreq

253
arch/arm/cpu/arm926ejs/spear/spr_misc.c
View File

@ -1,253 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <env.h>
#include <i2c.h>
#include <init.h>
#include <net.h>
#include <asm/global_data.h>
#include <linux/mtd/st_smi.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_emi.h>
#include <asm/arch/spr_defs.h>
#define CPU 0
#define DDR 1
#define SRAM_REL 0xD2801000
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_CMD_NET)
static int i2c_read_mac(uchar *buffer);
#endif
int dram_init(void)
{
/* Store complete RAM size and return */
gd->ram_size = get_ram_size(PHYS_SDRAM_1, PHYS_SDRAM_1_MAXSIZE);
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = gd->ram_size;
return 0;
}
int board_early_init_f()
{
#if defined(CONFIG_ST_SMI)
smi_init();
#endif
return 0;
}
int misc_init_r(void)
{
#if defined(CONFIG_CMD_NET)
uchar mac_id[6];
if (!eth_env_get_enetaddr("ethaddr", mac_id) && !i2c_read_mac(mac_id))
eth_env_set_enetaddr("ethaddr", mac_id);
#endif
env_set("verify", "n");
#if defined(CONFIG_SPEAR_USBTTY)
env_set("stdin", "usbtty");
env_set("stdout", "usbtty");
env_set("stderr", "usbtty");
#ifndef CONFIG_SYS_NO_DCACHE
dcache_enable();
#endif
#endif
return 0;
}
#ifdef CONFIG_SPEAR_EMI
struct cust_emi_para {
unsigned int tap;
unsigned int tsdp;
unsigned int tdpw;
unsigned int tdpr;
unsigned int tdcs;
};
/* EMI timing setting of m28w640hc of linux kernel */
const struct cust_emi_para emi_timing_m28w640hc = {
.tap = 0x10,
.tsdp = 0x05,
.tdpw = 0x0a,
.tdpr = 0x0a,
.tdcs = 0x05,
};
/* EMI timing setting of bootrom */
const struct cust_emi_para emi_timing_bootrom = {
.tap = 0xf,
.tsdp = 0x0,
.tdpw = 0xff,
.tdpr = 0x111,
.tdcs = 0x02,
};
void spear_emi_init(void)
{
const struct cust_emi_para *p = &emi_timing_m28w640hc;
struct emi_regs *emi_regs_p = (struct emi_regs *)CONFIG_SPEAR_EMIBASE;
unsigned int cs;
unsigned int val, tmp;
val = readl(CONFIG_SPEAR_RASBASE);
if (val & EMI_ACKMSK)
tmp = 0x3f;
else
tmp = 0x0;
writel(tmp, &emi_regs_p->ack);
for (cs = 0; cs < CONFIG_SYS_MAX_FLASH_BANKS; cs++) {
writel(p->tap, &emi_regs_p->bank_regs[cs].tap);
writel(p->tsdp, &emi_regs_p->bank_regs[cs].tsdp);
writel(p->tdpw, &emi_regs_p->bank_regs[cs].tdpw);
writel(p->tdpr, &emi_regs_p->bank_regs[cs].tdpr);
writel(p->tdcs, &emi_regs_p->bank_regs[cs].tdcs);
writel(EMI_CNTL_ENBBYTERW | ((val & 0x18) >> 3),
&emi_regs_p->bank_regs[cs].control);
}
}
#endif
int spear_board_init(ulong mach_type)
{
gd->bd->bi_arch_number = mach_type;
/* adress of boot parameters */
gd->bd->bi_boot_params = CONFIG_BOOT_PARAMS_ADDR;
#ifdef CONFIG_SPEAR_EMI
spear_emi_init();
#endif
return 0;
}
#if defined(CONFIG_CMD_NET)
static int i2c_read_mac(uchar *buffer)
{
u8 buf[2];
i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
/* Check if mac in i2c memory is valid */
if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
/* Valid mac address is saved in i2c eeprom */
i2c_read(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, buffer, MAC_LEN);
return 0;
}
return -1;
}
static int write_mac(uchar *mac)
{
u8 buf[2];
buf[0] = (u8)MAGIC_BYTE0;
buf[1] = (u8)MAGIC_BYTE1;
i2c_write(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
buf[0] = (u8)~MAGIC_BYTE0;
buf[1] = (u8)~MAGIC_BYTE1;
i2c_read(CONFIG_I2C_CHIPADDRESS, MAGIC_OFF, 1, buf, MAGIC_LEN);
/* check if valid MAC address is saved in I2C EEPROM or not? */
if ((buf[0] == MAGIC_BYTE0) && (buf[1] == MAGIC_BYTE1)) {
i2c_write(CONFIG_I2C_CHIPADDRESS, MAC_OFF, 1, mac, MAC_LEN);
puts("I2C EEPROM written with mac address \n");
return 0;
}
puts("I2C EEPROM writing failed\n");
return -1;
}
#endif
int do_chip_config(struct cmd_tbl *cmdtp, int flag, int argc,
char *const argv[])
{
void (*sram_setfreq) (unsigned int, unsigned int);
unsigned int frequency;
#if defined(CONFIG_CMD_NET)
unsigned char mac[6];
#endif
if ((argc > 3) || (argc < 2))
return cmd_usage(cmdtp);
if ((!strcmp(argv[1], "cpufreq")) || (!strcmp(argv[1], "ddrfreq"))) {
frequency = simple_strtoul(argv[2], NULL, 0);
if (frequency > 333) {
printf("Frequency is limited to 333MHz\n");
return 1;
}
sram_setfreq = memcpy((void *)SRAM_REL, setfreq, setfreq_sz);
if (!strcmp(argv[1], "cpufreq")) {
sram_setfreq(CPU, frequency);
printf("CPU frequency changed to %u\n", frequency);
} else {
sram_setfreq(DDR, frequency);
printf("DDR frequency changed to %u\n", frequency);
}
return 0;
#if defined(CONFIG_CMD_NET)
} else if (!strcmp(argv[1], "ethaddr")) {
u32 reg;
char *e, *s = argv[2];
for (reg = 0; reg < 6; ++reg) {
mac[reg] = s ? simple_strtoul(s, &e, 16) : 0;
if (s)
s = (*e) ? e + 1 : e;
}
write_mac(mac);
return 0;
#endif
} else if (!strcmp(argv[1], "print")) {
#if defined(CONFIG_CMD_NET)
if (!i2c_read_mac(mac)) {
printf("Ethaddr (from i2c mem) = %pM\n", mac);
} else {
printf("Ethaddr (from i2c mem) = Not set\n");
}
#endif
return 0;
}
return cmd_usage(cmdtp);
}
U_BOOT_CMD(chip_config, 3, 1, do_chip_config,
"configure chip",
"chip_config cpufreq/ddrfreq frequency\n"
#if defined(CONFIG_CMD_NET)
"chip_config ethaddr XX:XX:XX:XX:XX:XX\n"
#endif
"chip_config print");

65
arch/arm/cpu/arm926ejs/spear/start.S
View File

@ -1,65 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* armboot - Startup Code for ARM926EJS CPU-core
*
* Copyright (c) 2003 Texas Instruments
*
* ----- Adapted for OMAP1610 OMAP730 from ARM925t code ------
*
* Copyright (c) 2001 Marius Gröger <mag@sysgo.de>
* Copyright (c) 2002 Alex Züpke <azu@sysgo.de>
* Copyright (c) 2002 Gary Jennejohn <garyj@denx.de>
* Copyright (c) 2003 Richard Woodruff <r-woodruff2@ti.com>
* Copyright (c) 2003 Kshitij <kshitij@ti.com>
*/
#include <config.h>
/*
*************************************************************************
*
* Startup Code (reset vector)
*
* The BootROM already initialized its own stack in the [0-0xb00] reserved
* range of the SRAM. The SPL (in _main) will update the stack pointer to
* its own SRAM area (right before the gd section).
*
*************************************************************************
*/
.globl reset
.globl back_to_bootrom
reset:
/*
* SPL has to return back to BootROM in a few cases (eg. Ethernet boot,
* UART boot, USB boot): save registers in BootROM's stack and then the
* BootROM's stack pointer in the SPL's data section.
*/
push {r0-r12,lr}
ldr r0, =bootrom_stash_sp
str sp, [r0]
/*
* Flush v4 I/D caches
*/
mov r0, #0
mcr p15, 0, r0, c7, c7, 0 /* Flush v3/v4 cache */
mcr p15, 0, r0, c8, c7, 0 /* Flush v4 TLB */
/*
* Enable instruction cache
*/
mrc p15, 0, r0, c1, c0, 0
orr r0, r0, #0x00001000 /* set bit 12 (I) I-Cache */
mcr p15, 0, r0, c1, c0, 0
/*
* Go setup Memory and board specific bits prior to relocation.
* This call is not supposed to return.
*/
b _main /* _main will call board_init_f */
back_to_bootrom:
pop {r0-r12,pc}

121
arch/arm/cpu/arm926ejs/spear/timer.c
View File

@ -1,121 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#include <common.h>
#include <init.h>
#include <time.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_gpt.h>
#include <asm/arch/spr_misc.h>
#include <asm/ptrace.h>
#include <linux/delay.h>
#define GPT_RESOLUTION (CONFIG_SPEAR_HZ_CLOCK / CONFIG_SPEAR_HZ)
#define READ_TIMER() (readl(&gpt_regs_p->count) & GPT_FREE_RUNNING)
static struct gpt_regs *const gpt_regs_p =
(struct gpt_regs *)CONFIG_SPEAR_TIMERBASE;
static struct misc_regs *const misc_regs_p =
(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
DECLARE_GLOBAL_DATA_PTR;
static ulong get_timer_masked(void);
#define timestamp gd->arch.tbl
#define lastdec gd->arch.lastinc
int timer_init(void)
{
u32 synth;
/* Prescaler setting */
#if defined(CONFIG_SPEAR600)
writel(MISC_PRSC_CFG, &misc_regs_p->prsc1_clk_cfg);
synth = MISC_GPT3SYNTH;
#else
# error Incorrect config. Can only be SPEAR{600|300|310|320}
#endif
writel(readl(&misc_regs_p->periph_clk_cfg) | synth,
&misc_regs_p->periph_clk_cfg);
/* disable timers */
writel(GPT_PRESCALER_1 | GPT_MODE_AUTO_RELOAD, &gpt_regs_p->control);
/* load value for free running */
writel(GPT_FREE_RUNNING, &gpt_regs_p->compare);
/* auto reload, start timer */
writel(readl(&gpt_regs_p->control) | GPT_ENABLE, &gpt_regs_p->control);
/* Reset the timer */
lastdec = READ_TIMER();
timestamp = 0;
return 0;
}
/*
* timer without interrupts
*/
ulong get_timer(ulong base)
{
return (get_timer_masked() / GPT_RESOLUTION) - base;
}
void __udelay(unsigned long usec)
{
ulong tmo;
ulong start = get_timer_masked();
ulong tenudelcnt = CONFIG_SPEAR_HZ_CLOCK / (1000 * 100);
ulong rndoff;
rndoff = (usec % 10) ? 1 : 0;
/* tenudelcnt timer tick gives 10 microsecconds delay */
tmo = ((usec / 10) + rndoff) * tenudelcnt;
while ((ulong) (get_timer_masked() - start) < tmo)
;
}
static ulong get_timer_masked(void)
{
ulong now = READ_TIMER();
if (now >= lastdec) {
/* normal mode */
timestamp += now - lastdec;
} else {
/* we have an overflow ... */
timestamp += now + GPT_FREE_RUNNING - lastdec;
}
lastdec = now;
return timestamp;
}
/*
* This function is derived from PowerPC code (read timebase as long long).
* On ARM it just returns the timer value.
*/
unsigned long long get_ticks(void)
{
return get_timer(0);
}
/*
* This function is derived from PowerPC code (timebase clock frequency).
* On ARM it returns the number of timer ticks per second.
*/
ulong get_tbclk(void)
{
return CONFIG_SPEAR_HZ;
}

54
arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
View File

@ -1,54 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2015 Stefan Roese <sr@denx.de>
*
* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
* on behalf of DENX Software Engineering GmbH
*
* January 2004 - Changed to support H4 device
* Copyright (c) 2004-2008 Texas Instruments
*
* (C) Copyright 2002
* Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
*/
MEMORY { .sram : ORIGIN = IMAGE_TEXT_BASE,\
LENGTH = IMAGE_MAX_SIZE }
OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
OUTPUT_ARCH(arm)
ENTRY(_start)
SECTIONS
{
.text :
{
__start = .;
*(.vectors)
CPUDIR/spear/start.o (.text*)
*(.text*)
} > .sram
. = ALIGN(4);
.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
. = ALIGN(4);
.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
. = ALIGN(4);
.u_boot_list : {
KEEP(*(SORT(.u_boot_list*)));
} > .sram
. = ALIGN(4);
__image_copy_end = .;
_end = .;
.bss :
{
. = ALIGN(4);
__bss_start = .;
*(.bss*)
. = ALIGN(4);
__bss_end = .;
} > .sram
}

10
arch/arm/include/asm/arch-spear/clk.h
View File

@ -1,10 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2010, STMicroelectronics - All Rights Reserved
* Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
*/
static inline unsigned long get_macb_pclk_rate(unsigned int dev_id)
{
return 83000000;
}

23
arch/arm/include/asm/arch-spear/gpio.h
View File

@ -1,23 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
#ifndef __ASM_ARCH_SPEAR_GPIO_H
#define __ASM_ARCH_SPEAR_GPIO_H
enum gpio_direction {
GPIO_DIRECTION_IN,
GPIO_DIRECTION_OUT,
};
struct gpio_regs {
u32 gpiodata[0x100]; /* 0x000 ... 0x3fc */
u32 gpiodir; /* 0x400 */
};
#define SPEAR_GPIO_COUNT 8
#define DATA_REG_ADDR(gpio) (1 << (gpio + 2))
#endif /* __ASM_ARCH_SPEAR_GPIO_H */

45
arch/arm/include/asm/arch-spear/hardware.h
View File

@ -1,45 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2009, STMicroelectronics - All Rights Reserved
* Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
*/
#ifndef _ASM_ARCH_HARDWARE_H
#define _ASM_ARCH_HARDWARE_H
#define CONFIG_SYS_USBD_BASE 0xE1100000
#define CONFIG_SYS_PLUG_BASE 0xE1200000
#define CONFIG_SYS_FIFO_BASE 0xE1000800
#define CONFIG_SYS_UHC0_EHCI_BASE 0xE1800000
#define CONFIG_SYS_UHC1_EHCI_BASE 0xE2000000
#define CONFIG_SYS_SMI_BASE 0xFC000000
#define CONFIG_SPEAR_SYSCNTLBASE 0xFCA00000
#define CONFIG_SPEAR_TIMERBASE 0xFC800000
#define CONFIG_SPEAR_MISCBASE 0xFCA80000
#define CONFIG_SPEAR_ETHBASE 0xE0800000
#define CONFIG_SPEAR_MPMCBASE 0xFC600000
#define CONFIG_SSP1_BASE 0xD0100000
#define CONFIG_SSP2_BASE 0xD0180000
#define CONFIG_SSP3_BASE 0xD8180000
#define CONFIG_GPIO_BASE 0xD8100000
#define CONFIG_SYS_NAND_CLE (1 << 16)
#define CONFIG_SYS_NAND_ALE (1 << 17)
#if defined(CONFIG_SPEAR600)
#define CONFIG_SYS_FSMC_BASE 0xD1800000
#define CONFIG_FSMC_NAND_BASE 0xD2000000
#define CONFIG_SPEAR_BOOTSTRAPCFG 0xFCA80000
#define CONFIG_SPEAR_BOOTSTRAPSHFT 16
#define CONFIG_SPEAR_BOOTSTRAPMASK 0xB
#define CONFIG_SPEAR_ONLYSNORBOOT 0xA
#define CONFIG_SPEAR_NORNANDBOOT 0xB
#define CONFIG_SPEAR_NORNAND8BOOT 0x8
#define CONFIG_SPEAR_NORNAND16BOOT 0x9
#define CONFIG_SPEAR_USBBOOT 0x8
#define CONFIG_SPEAR_MPMCREGS 100
#endif
#endif /* _ASM_ARCH_HARDWARE_H */

50
arch/arm/include/asm/arch-spear/spr_defs.h
View File

@ -1,50 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#ifndef __SPR_DEFS_H__
#define __SPR_DEFS_H__
extern int spear_board_init(ulong);
extern void setfreq(unsigned int, unsigned int);
extern unsigned int setfreq_sz;
void plat_ddr_init(void);
void spear_late_init(void);
int snor_boot_selected(void);
int nand_boot_selected(void);
int pnor_boot_selected(void);
int usb_boot_selected(void);
int uart_boot_selected(void);
int tftp_boot_selected(void);
int i2c_boot_selected(void);
int spi_boot_selected(void);
int mmc_boot_selected(void);
extern u32 mpmc_conf_vals[];
struct chip_data {
int cpufreq;
int dramfreq;
int dramtype;
uchar version[32];
};
/* HW mac id in i2c memory definitions */
#define MAGIC_OFF 0x0
#define MAGIC_LEN 0x2
#define MAGIC_BYTE0 0x55
#define MAGIC_BYTE1 0xAA
#define MAC_OFF 0x2
#define MAC_LEN 0x6
#define PNOR_WIDTH_8 0
#define PNOR_WIDTH_16 1
#define PNOR_WIDTH_32 2
#define PNOR_WIDTH_NUM 3
#define PNOR_WIDTH_SEARCH 0xff
#endif

37
arch/arm/include/asm/arch-spear/spr_emi.h
View File

@ -1,37 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Ryan CHEN, ST Micoelectronics, ryan.chen@st.com
*/
#ifndef __SPEAR_EMI_H__
#define __SPEAR_EMI_H__
#ifdef CONFIG_SPEAR_EMI
struct emi_bank_regs {
u32 tap;
u32 tsdp;
u32 tdpw;
u32 tdpr;
u32 tdcs;
u32 control;
};
struct emi_regs {
struct emi_bank_regs bank_regs[CONFIG_SYS_MAX_FLASH_BANKS];
u32 tout;
u32 ack;
u32 irq;
};
#define EMI_ACKMSK 0x40
/* control register definitions */
#define EMI_CNTL_ENBBYTEW (1 << 2)
#define EMI_CNTL_ENBBYTER (1 << 3)
#define EMI_CNTL_ENBBYTERW (EMI_CNTL_ENBBYTER | EMI_CNTL_ENBBYTEW)
#endif
#endif

68
arch/arm/include/asm/arch-spear/spr_gpt.h
View File

@ -1,68 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#ifndef _SPR_GPT_H
#define _SPR_GPT_H
struct gpt_regs {
u8 reserved[0x80];
u32 control;
u32 status;
u32 compare;
u32 count;
u32 capture_re;
u32 capture_fe;
};
/*
* TIMER_CONTROL register settings
*/
#define GPT_PRESCALER_MASK 0x000F
#define GPT_PRESCALER_1 0x0000
#define GPT_PRESCALER_2 0x0001
#define GPT_PRESCALER_4 0x0002
#define GPT_PRESCALER_8 0x0003
#define GPT_PRESCALER_16 0x0004
#define GPT_PRESCALER_32 0x0005
#define GPT_PRESCALER_64 0x0006
#define GPT_PRESCALER_128 0x0007
#define GPT_PRESCALER_256 0x0008
#define GPT_MODE_SINGLE_SHOT 0x0010
#define GPT_MODE_AUTO_RELOAD 0x0000
#define GPT_ENABLE 0x0020
#define GPT_CAPT_MODE_MASK 0x00C0
#define GPT_CAPT_MODE_NONE 0x0000
#define GPT_CAPT_MODE_RE 0x0040
#define GPT_CAPT_MODE_FE 0x0080
#define GPT_CAPT_MODE_BOTH 0x00C0
#define GPT_INT_MATCH 0x0100
#define GPT_INT_FE 0x0200
#define GPT_INT_RE 0x0400
/*
* TIMER_STATUS register settings
*/
#define GPT_STS_MATCH 0x0001
#define GPT_STS_FE 0x0002
#define GPT_STS_RE 0x0004
/*
* TIMER_COMPARE register settings
*/
#define GPT_FREE_RUNNING 0xFFFF
/* Timer, HZ specific defines */
#define CONFIG_SPEAR_HZ 1000
#define CONFIG_SPEAR_HZ_CLOCK 8300000
#endif

257
arch/arm/include/asm/arch-spear/spr_misc.h
View File

@ -1,257 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#ifndef _SPR_MISC_H
#define _SPR_MISC_H
struct misc_regs {
u32 auto_cfg_reg; /* 0x0 */
u32 armdbg_ctr_reg; /* 0x4 */
u32 pll1_cntl; /* 0x8 */
u32 pll1_frq; /* 0xc */
u32 pll1_mod; /* 0x10 */
u32 pll2_cntl; /* 0x14 */
u32 pll2_frq; /* 0x18 */
u32 pll2_mod; /* 0x1C */
u32 pll_ctr_reg; /* 0x20 */
u32 amba_clk_cfg; /* 0x24 */
u32 periph_clk_cfg; /* 0x28 */
u32 periph1_clken; /* 0x2C */
u32 soc_core_id; /* 0x30 */
u32 ras_clken; /* 0x34 */
u32 periph1_rst; /* 0x38 */
u32 periph2_rst; /* 0x3C */
u32 ras_rst; /* 0x40 */
u32 prsc1_clk_cfg; /* 0x44 */
u32 prsc2_clk_cfg; /* 0x48 */
u32 prsc3_clk_cfg; /* 0x4C */
u32 amem_cfg_ctrl; /* 0x50 */
u32 expi_clk_cfg; /* 0x54 */
u32 reserved_1; /* 0x58 */
u32 clcd_synth_clk; /* 0x5C */
u32 irda_synth_clk; /* 0x60 */
u32 uart_synth_clk; /* 0x64 */
u32 gmac_synth_clk; /* 0x68 */
u32 ras_synth1_clk; /* 0x6C */
u32 ras_synth2_clk; /* 0x70 */
u32 ras_synth3_clk; /* 0x74 */
u32 ras_synth4_clk; /* 0x78 */
u32 arb_icm_ml1; /* 0x7C */
u32 arb_icm_ml2; /* 0x80 */
u32 arb_icm_ml3; /* 0x84 */
u32 arb_icm_ml4; /* 0x88 */
u32 arb_icm_ml5; /* 0x8C */
u32 arb_icm_ml6; /* 0x90 */
u32 arb_icm_ml7; /* 0x94 */
u32 arb_icm_ml8; /* 0x98 */
u32 arb_icm_ml9; /* 0x9C */
u32 dma_src_sel; /* 0xA0 */
u32 uphy_ctr_reg; /* 0xA4 */
u32 gmac_ctr_reg; /* 0xA8 */
u32 port_bridge_ctrl; /* 0xAC */
u32 reserved_2[4]; /* 0xB0--0xBC */
u32 prc1_ilck_ctrl_reg; /* 0xC0 */
u32 prc2_ilck_ctrl_reg; /* 0xC4 */
u32 prc3_ilck_ctrl_reg; /* 0xC8 */
u32 prc4_ilck_ctrl_reg; /* 0xCC */
u32 prc1_intr_ctrl_reg; /* 0xD0 */
u32 prc2_intr_ctrl_reg; /* 0xD4 */
u32 prc3_intr_ctrl_reg; /* 0xD8 */
u32 prc4_intr_ctrl_reg; /* 0xDC */
u32 powerdown_cfg_reg; /* 0xE0 */
u32 ddr_1v8_compensation; /* 0xE4 */
u32 ddr_2v5_compensation; /* 0xE8 */
u32 core_3v3_compensation; /* 0xEC */
u32 ddr_pad; /* 0xF0 */
u32 bist1_ctr_reg; /* 0xF4 */
u32 bist2_ctr_reg; /* 0xF8 */
u32 bist3_ctr_reg; /* 0xFC */
u32 bist4_ctr_reg; /* 0x100 */
u32 bist5_ctr_reg; /* 0x104 */
u32 bist1_rslt_reg; /* 0x108 */
u32 bist2_rslt_reg; /* 0x10C */
u32 bist3_rslt_reg; /* 0x110 */
u32 bist4_rslt_reg; /* 0x114 */
u32 bist5_rslt_reg; /* 0x118 */
u32 syst_error_reg; /* 0x11C */
u32 reserved_3[0x1FB8]; /* 0x120--0x7FFC */
u32 ras_gpp1_in; /* 0x8000 */
u32 ras_gpp2_in; /* 0x8004 */
u32 ras_gpp1_out; /* 0x8008 */
u32 ras_gpp2_out; /* 0x800C */
};
/* SYNTH_CLK value*/
#define SYNTH23 0x00020003
/* PLLx_FRQ value */
#if defined(CONFIG_SPEAR600)
#define FREQ_332 0xA600010F
#define FREQ_266 0x8500010F
#endif
/* PLL_CTR_REG */
#define MEM_CLK_SEL_MSK 0x70000000
#define MEM_CLK_HCLK 0x00000000
#define MEM_CLK_2HCLK 0x10000000
#define MEM_CLK_PLL2 0x30000000
#define EXPI_CLK_CFG_LOW_COMPR 0x2000
#define EXPI_CLK_CFG_CLK_EN 0x0400
#define EXPI_CLK_CFG_RST 0x0200
#define EXPI_CLK_SYNT_EN 0x0010
#define EXPI_CLK_CFG_SEL_PLL2 0x0004
#define EXPI_CLK_CFG_INT_CLK_EN 0x0001
#define PLL2_CNTL_6UA 0x1c00
#define PLL2_CNTL_SAMPLE 0x0008
#define PLL2_CNTL_ENABLE 0x0004
#define PLL2_CNTL_RESETN 0x0002
#define PLL2_CNTL_LOCK 0x0001
/* AUTO_CFG_REG value */
#define MISC_SOCCFGMSK 0x0000003F
#define MISC_SOCCFG30 0x0000000C
#define MISC_SOCCFG31 0x0000000D
#define MISC_NANDDIS 0x00020000
/* PERIPH_CLK_CFG value */
#define MISC_GPT3SYNTH 0x00000400
#define MISC_GPT4SYNTH 0x00000800
#define CONFIG_SPEAR_UART48M 0
#define CONFIG_SPEAR_UARTCLKMSK (0x1 << 4)
/* PRSC_CLK_CFG value */
/*
* Fout = Fin / (2^(N+1) * (M + 1))
*/
#define MISC_PRSC_N_1 0x00001000
#define MISC_PRSC_M_9 0x00000009
#define MISC_PRSC_N_4 0x00004000
#define MISC_PRSC_M_399 0x0000018F
#define MISC_PRSC_N_6 0x00006000
#define MISC_PRSC_M_2593 0x00000A21
#define MISC_PRSC_M_124 0x0000007C
#define MISC_PRSC_CFG (MISC_PRSC_N_1 | MISC_PRSC_M_9)
/* PERIPH1_CLKEN, PERIPH1_RST value */
#define MISC_USBDENB 0x01000000
#define MISC_ETHENB 0x00800000
#define MISC_SMIENB 0x00200000
#define MISC_GPIO3ENB 0x00040000
#define MISC_GPT3ENB 0x00010000
#define MISC_SSP3ENB 0x00004000
#define MISC_GPIO4ENB 0x00002000
#define MISC_GPT2ENB 0x00000800
#define MISC_FSMCENB 0x00000200
#define MISC_I2CENB 0x00000080
#define MISC_SSP2ENB 0x00000040
#define MISC_SSP1ENB 0x00000020
#define MISC_UART0ENB 0x00000008
/* PERIPH_CLK_CFG */
#define XTALTIMEEN 0x00000001
#define PLLTIMEEN 0x00000002
#define CLCDCLK_SYNTH 0x00000000
#define CLCDCLK_48MHZ 0x00000004
#define CLCDCLK_EXT 0x00000008
#define UARTCLK_MASK (0x1 << 4)
#define UARTCLK_48MHZ 0x00000000
#define UARTCLK_SYNTH 0x00000010
#define IRDACLK_48MHZ 0x00000000
#define IRDACLK_SYNTH 0x00000020
#define IRDACLK_EXT 0x00000040
#define RTC_DISABLE 0x00000080
#define GPT1CLK_48MHZ 0x00000000
#define GPT1CLK_SYNTH 0x00000100
#define GPT2CLK_48MHZ 0x00000000
#define GPT2CLK_SYNTH 0x00000200
#define GPT3CLK_48MHZ 0x00000000
#define GPT3CLK_SYNTH 0x00000400
#define GPT4CLK_48MHZ 0x00000000
#define GPT4CLK_SYNTH 0x00000800
#define GPT5CLK_48MHZ 0x00000000
#define GPT5CLK_SYNTH 0x00001000
#define GPT1_FREEZE 0x00002000
#define GPT2_FREEZE 0x00004000
#define GPT3_FREEZE 0x00008000
#define GPT4_FREEZE 0x00010000
#define GPT5_FREEZE 0x00020000
/* PERIPH1_CLKEN bits */
#define PERIPH_ARM1_WE 0x00000001
#define PERIPH_ARM1 0x00000002
#define PERIPH_ARM2 0x00000004
#define PERIPH_UART1 0x00000008
#define PERIPH_UART2 0x00000010
#define PERIPH_SSP1 0x00000020
#define PERIPH_SSP2 0x00000040
#define PERIPH_I2C 0x00000080
#define PERIPH_JPEG 0x00000100
#define PERIPH_FSMC 0x00000200
#define PERIPH_FIRDA 0x00000400
#define PERIPH_GPT4 0x00000800
#define PERIPH_GPT5 0x00001000
#define PERIPH_GPIO4 0x00002000
#define PERIPH_SSP3 0x00004000
#define PERIPH_ADC 0x00008000
#define PERIPH_GPT3 0x00010000
#define PERIPH_RTC 0x00020000
#define PERIPH_GPIO3 0x00040000
#define PERIPH_DMA 0x00080000
#define PERIPH_ROM 0x00100000
#define PERIPH_SMI 0x00200000
#define PERIPH_CLCD 0x00400000
#define PERIPH_GMAC 0x00800000
#define PERIPH_USBD 0x01000000
#define PERIPH_USBH1 0x02000000
#define PERIPH_USBH2 0x04000000
#define PERIPH_MPMC 0x08000000
#define PERIPH_RAMW 0x10000000
#define PERIPH_MPMC_EN 0x20000000
#define PERIPH_MPMC_WE 0x40000000
#define PERIPH_MPMCMSK 0x60000000
#define PERIPH_CLK_ALL 0x0FFFFFF8
#define PERIPH_RST_ALL 0x00000004
/* DDR_PAD values */
#define DDR_PAD_CNF_MSK 0x0000ffff
#define DDR_PAD_SW_CONF 0x00060000
#define DDR_PAD_SSTL_SEL 0x00000001
#define DDR_PAD_DRAM_TYPE 0x00008000
/* DDR_COMP values */
#define DDR_COMP_ACCURATE 0x00000010
/* SoC revision stuff */
#define SOC_PRI_SHFT 16
#define SOC_SEC_SHFT 8
/* Revision definitions */
#define SOC_SPEAR_NA 0
/*
* The definitons have started from
* 101 for SPEAr6xx
* 201 for SPEAr3xx
* 301 for SPEAr13xx
*/
#define SOC_SPEAR600_AA 101
#define SOC_SPEAR600_AB 102
#define SOC_SPEAR600_BA 103
#define SOC_SPEAR600_BB 104
#define SOC_SPEAR600_BC 105
#define SOC_SPEAR600_BD 106
#define SOC_SPEAR300 201
#define SOC_SPEAR310 202
#define SOC_SPEAR320 203
extern int get_socrev(void);
int fsmc_nand_switch_ecc(uint32_t eccstrength);
#endif

28
arch/arm/include/asm/arch-spear/spr_ssp.h
View File

@ -1,28 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
#ifndef _SPR_SSP_H
#define _SPR_SSP_H
struct ssp_regs {
u32 sspcr0;
u32 sspcr1;
u32 sspdr;
u32 sspsr;
u32 sspcpsr;
u32 sspimsc;
u32 sspicr;
u32 sspdmacr;
};
#define SSPCR0_FRF_MOT_SPI 0x0000
#define SSPCR0_DSS_16BITS 0x000f
#define SSPCR1_SSE 0x0002
#define SSPSR_TNF 0x2
#define SSPSR_TFE 0x1
#endif

35
arch/arm/include/asm/arch-spear/spr_syscntl.h
View File

@ -1,35 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Ryan CHEN, ST Micoelectronics, ryan.chen@st.com
*/
#ifndef __SYSCTRL_H
#define __SYSCTRL_H
struct syscntl_regs {
u32 scctrl;
u32 scsysstat;
u32 scimctrl;
u32 scimsysstat;
u32 scxtalctrl;
u32 scpllctrl;
u32 scpllfctrl;
u32 scperctrl0;
u32 scperctrl1;
u32 scperen;
u32 scperdis;
const u32 scperclken;
const u32 scperstat;
};
#define MODE_SHIFT 0x00000003
#define NORMAL 0x00000004
#define SLOW 0x00000002
#define DOZE 0x00000001
#define SLEEP 0x00000000
#define PLL_TIM 0x01FFFFFF
#endif

15
board/spear/spear600/Kconfig
View File

@ -1,15 +0,0 @@
if TARGET_SPEAR600
config SYS_BOARD
default "spear600"
config SYS_VENDOR
default "spear"
config SYS_SOC
default "spear"
config SYS_CONFIG_NAME
default "spear6xx_evb"
endif

13
board/spear/spear600/MAINTAINERS
View File

@ -1,13 +0,0 @@
SPEAR600 BOARD
M: Vipin Kumar <vipin.kumar@st.com>
S: Maintained
F: board/spear/spear600/
F: include/configs/spear6xx_evb.h
F: configs/spear600_defconfig
SPEAR600_NAND BOARD
#M: -
S: Maintained
F: configs/spear600_nand_defconfig
F: configs/spear600_usbtty_defconfig
F: configs/spear600_usbtty_nand_defconfig

6
board/spear/spear600/Makefile
View File

@ -1,6 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
obj-y += spear600.o

56
board/spear/spear600/spear600.c
View File

@ -1,56 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*/
#include <common.h>
#include <miiphy.h>
#include <net.h>
#include <netdev.h>
#include <nand.h>
#include <asm/io.h>
#include <linux/mtd/fsmc_nand.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_defs.h>
#include <asm/arch/spr_misc.h>
static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
int board_init(void)
{
return spear_board_init(MACH_TYPE_SPEAR600);
}
/*
* board_nand_init - Board specific NAND initialization
* @nand: mtd private chip structure
*
* Called by nand_init_chip to initialize the board specific functions
*/
void board_nand_init()
{
struct misc_regs *const misc_regs_p =
(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
struct nand_chip *nand = &nand_chip[0];
#if defined(CONFIG_NAND_FSMC)
if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
fsmc_nand_init(nand);
#endif
return;
}
int board_eth_init(struct bd_info *bis)
{
int ret = 0;
#if defined(CONFIG_ETH_DESIGNWARE)
u32 interface = PHY_INTERFACE_MODE_MII;
if (designware_initialize(CONFIG_SPEAR_ETHBASE, interface) >= 0)
ret++;
#endif
return ret;
}

18
board/spear/x600/Kconfig
View File

@ -1,18 +0,0 @@
if TARGET_X600
config SPL_LDSCRIPT
default "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
config SYS_BOARD
default "x600"
config SYS_VENDOR
default "spear"
config SYS_SOC
default "spear"
config SYS_CONFIG_NAME
default "x600"
endif

6
board/spear/x600/MAINTAINERS
View File

@ -1,6 +0,0 @@
X600 BOARD
M: Stefan Roese <sr@denx.de>
S: Maintained
F: board/spear/x600/
F: include/configs/x600.h
F: configs/x600_defconfig

11
board/spear/x600/Makefile
View File

@ -1,11 +0,0 @@
# SPDX-License-Identifier: GPL-2.0+
#
# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
ifdef CONFIG_SPL_BUILD
# necessary to create built-in.o
obj- := __dummy__.o
else
obj-y := fpga.o x600.o
endif

265
board/spear/x600/fpga.c
View File

@ -1,265 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <log.h>
#include <spartan3.h>
#include <command.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_misc.h>
#include <asm/arch/spr_ssp.h>
#include <linux/delay.h>
/*
* FPGA program pin configuration on X600:
*
* Only PROG and DONE are connected to GPIOs. INIT is not connected to the
* SoC at all. And CLOCK and DATA are connected to the SSP2 port. We use
* 16bit serial writes via this SSP port to write the data bits into the
* FPGA.
*/
#define CONFIG_SYS_FPGA_PROG 2
#define CONFIG_SYS_FPGA_DONE 3
/*
* Set the active-low FPGA reset signal.
*/
static void fpga_reset(int assert)
{
/*
* On x600 we have no means to toggle the FPGA reset signal
*/
debug("%s:%d: RESET (%d)\n", __func__, __LINE__, assert);
}
/*
* Set the FPGA's active-low SelectMap program line to the specified level
*/
static int fpga_pgm_fn(int assert, int flush, int cookie)
{
debug("%s:%d: FPGA PROG (%d)\n", __func__, __LINE__, assert);
gpio_set_value(CONFIG_SYS_FPGA_PROG, assert);
return assert;
}
/*
* Test the state of the active-low FPGA INIT line. Return 1 on INIT
* asserted (low).
*/
static int fpga_init_fn(int cookie)
{
static int state;
debug("%s:%d: init (state=%d)\n", __func__, __LINE__, state);
/*
* On x600, the FPGA INIT signal is not connected to the SoC.
* We can't read the INIT status. Let's return the "correct"
* INIT signal state generated via a local state-machine.
*/
if (++state == 1) {
return 1;
} else {
state = 0;
return 0;
}
}
/*
* Test the state of the active-high FPGA DONE pin
*/
static int fpga_done_fn(int cookie)
{
struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
/*
* Wait for Tx-FIFO to become empty before looking for DONE
*/
while (!(readl(&ssp->sspsr) & SSPSR_TFE))
;
if (gpio_get_value(CONFIG_SYS_FPGA_DONE))
return 1;
else
return 0;
}
/*
* FPGA pre-configuration function. Just make sure that
* FPGA reset is asserted to keep the FPGA from starting up after
* configuration.
*/
static int fpga_pre_config_fn(int cookie)
{
debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
fpga_reset(true);
return 0;
}
/*
* FPGA post configuration function. Blip the FPGA reset line and then see if
* the FPGA appears to be running.
*/
static int fpga_post_config_fn(int cookie)
{
int rc = 0;
debug("%s:%d: FPGA post configuration\n", __func__, __LINE__);
fpga_reset(true);
udelay(100);
fpga_reset(false);
udelay(100);
return rc;
}
static int fpga_clk_fn(int assert_clk, int flush, int cookie)
{
/*
* No dedicated clock signal on x600 (data & clock generated)
* in SSP interface. So we don't have to do anything here.
*/
return assert_clk;
}
static int fpga_wr_fn(int assert_write, int flush, int cookie)
{
struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
static int count;
static u16 data;
/*
* First collect 16 bits of data
*/
data = data << 1;
if (assert_write)
data |= 1;
/*
* If 16 bits are not available, return for more bits
*/
count++;
if (count != 16)
return assert_write;
count = 0;
/*
* Wait for Tx-FIFO to become ready
*/
while (!(readl(&ssp->sspsr) & SSPSR_TNF))
;
/* Send 16 bits to FPGA via SSP bus */
writel(data, &ssp->sspdr);
return assert_write;
}
static xilinx_spartan3_slave_serial_fns x600_fpga_fns = {
fpga_pre_config_fn,
fpga_pgm_fn,
fpga_clk_fn,
fpga_init_fn,
fpga_done_fn,
fpga_wr_fn,
fpga_post_config_fn,
};
static xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
XILINX_XC3S1200E_DESC(slave_serial, &x600_fpga_fns, 0)
};
/*
* Initialize the SelectMap interface. We assume that the mode and the
* initial state of all of the port pins have already been set!
*/
static void fpga_serialslave_init(void)
{
debug("%s:%d: Initialize serial slave interface\n", __func__, __LINE__);
fpga_pgm_fn(false, false, 0); /* make sure program pin is inactive */
}
static int expi_setup(int freq)
{
struct misc_regs *misc = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
int pll2_m, pll2_n, pll2_p, expi_x, expi_y;
pll2_m = (freq * 2) / 1000;
pll2_n = 15;
pll2_p = 1;
expi_x = 1;
expi_y = 2;
/*
* Disable reset, Low compression, Disable retiming, Enable Expi,
* Enable soft reset, DMA, PLL2, Internal
*/
writel(EXPI_CLK_CFG_LOW_COMPR | EXPI_CLK_CFG_CLK_EN | EXPI_CLK_CFG_RST |
EXPI_CLK_SYNT_EN | EXPI_CLK_CFG_SEL_PLL2 |
EXPI_CLK_CFG_INT_CLK_EN | (expi_y << 16) | (expi_x << 24),
&misc->expi_clk_cfg);
/*
* 6 uA, Internal feedback, 1st order, Non-dithered, Sample Parameters,
* Enable PLL2, Disable reset
*/
writel((pll2_m << 24) | (pll2_p << 8) | (pll2_n), &misc->pll2_frq);
writel(PLL2_CNTL_6UA | PLL2_CNTL_SAMPLE | PLL2_CNTL_ENABLE |
PLL2_CNTL_RESETN | PLL2_CNTL_LOCK, &misc->pll2_cntl);
/*
* Disable soft reset
*/
clrbits_le32(&misc->expi_clk_cfg, EXPI_CLK_CFG_RST);
return 0;
}
/*
* Initialize the fpga
*/
int x600_init_fpga(void)
{
struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
struct misc_regs *misc = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
/* Enable SSP2 clock */
writel(readl(&misc->periph1_clken) | MISC_SSP2ENB | MISC_GPIO4ENB,
&misc->periph1_clken);
/* Set EXPI clock to 45 MHz */
expi_setup(45000);
/* Configure GPIO directions */
gpio_direction_output(CONFIG_SYS_FPGA_PROG, 0);
gpio_direction_input(CONFIG_SYS_FPGA_DONE);
writel(SSPCR0_DSS_16BITS, &ssp->sspcr0);
writel(SSPCR1_SSE, &ssp->sspcr1);
/*
* Set lowest prescale divisor value (CPSDVSR) of 2 for max download
* speed.
*
* Actual data clock rate is: 80MHz / (CPSDVSR * (SCR + 1))
* With CPSDVSR at 2 and SCR at 0, the maximume clock rate is 40MHz.
*/
writel(2, &ssp->sspcpsr);
fpga_init();
fpga_serialslave_init();
debug("%s:%d: Adding fpga 0\n", __func__, __LINE__);
fpga_add(fpga_xilinx, &fpga[0]);
return 0;
}

6
board/spear/x600/fpga.h
View File

@ -1,6 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
int x600_init_fpga(void);

150
board/spear/x600/x600.c
View File

@ -1,150 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
#include <common.h>
#include <flash.h>
#include <init.h>
#include <micrel.h>
#include <nand.h>
#include <net.h>
#include <netdev.h>
#include <phy.h>
#include <rtc.h>
#include <asm/io.h>
#include <asm/mach-types.h>
#include <asm/arch/hardware.h>
#include <asm/arch/spr_defs.h>
#include <asm/arch/spr_misc.h>
#include <linux/mtd/fsmc_nand.h>
#include "fpga.h"
static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
int board_init(void)
{
/*
* X600 is equipped with an M41T82 RTC. This RTC has the
* HT bit (Halt Update), which needs to be cleared upon
* power-up. Otherwise the RTC is halted.
*/
rtc_reset();
return spear_board_init(MACH_TYPE_SPEAR600);
}
int board_late_init(void)
{
/*
* Monitor and env protection on by default
*/
flash_protect(FLAG_PROTECT_SET,
CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE +
CONFIG_SYS_SPL_LEN + CONFIG_SYS_MONITOR_LEN +
2 * CONFIG_ENV_SECT_SIZE - 1,
&flash_info[0]);
/* Init FPGA subsystem */
x600_init_fpga();
return 0;
}
/*
* board_nand_init - Board specific NAND initialization
* @nand: mtd private chip structure
*
* Called by nand_init_chip to initialize the board specific functions
*/
void board_nand_init(void)
{
struct misc_regs *const misc_regs_p =
(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
struct nand_chip *nand = &nand_chip[0];
if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
fsmc_nand_init(nand);
}
int board_phy_config(struct phy_device *phydev)
{
unsigned short id1, id2;
/* check whether KSZ9031 or AR8035 has to be configured */
id1 = phy_read(phydev, MDIO_DEVAD_NONE, 2);
id2 = phy_read(phydev, MDIO_DEVAD_NONE, 3);
if ((id1 == 0x22) && ((id2 & 0xFFF0) == 0x1620)) {
/* PHY configuration for Micrel KSZ9031 */
printf("PHY KSZ9031 detected - ");
phy_write(phydev, MDIO_DEVAD_NONE, MII_CTRL1000, 0x1c00);
/* control data pad skew - devaddr = 0x02, register = 0x04 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x0000);
/* rx data pad skew - devaddr = 0x02, register = 0x05 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x0000);
/* tx data pad skew - devaddr = 0x02, register = 0x05 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x0000);
/* gtx and rx clock pad skew - devaddr = 0x02, reg = 0x08 */
ksz9031_phy_extended_write(phydev, 0x02,
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
MII_KSZ9031_MOD_DATA_NO_POST_INC,
0x03FF);
} else {
/* PHY configuration for Vitesse VSC8641 */
printf("PHY VSC8641 detected - ");
/* Extended PHY control 1, select GMII */
phy_write(phydev, MDIO_DEVAD_NONE, 23, 0x0020);
/* Software reset necessary after GMII mode selction */
phy_reset(phydev);
/* Enable extended page register access */
phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0001);
/* 17e: Enhanced LED behavior, needs to be written twice */
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff);
phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x09ff);
/* 16e: Enhanced LED method select */
phy_write(phydev, MDIO_DEVAD_NONE, 16, 0xe0ea);
/* Disable extended page register access */
phy_write(phydev, MDIO_DEVAD_NONE, 31, 0x0000);
/* Enable clock output pin */
phy_write(phydev, MDIO_DEVAD_NONE, 18, 0x0049);
}
if (phydev->drv->config)
phydev->drv->config(phydev);
return 0;
}
int board_eth_init(struct bd_info *bis)
{
int ret = 0;
if (designware_initialize(CONFIG_SPEAR_ETHBASE,
PHY_INTERFACE_MODE_GMII) >= 0)
ret++;
return ret;
}

39
configs/spear600_defconfig
View File

@ -1,39 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_TARGET_SPEAR600=y
CONFIG_SYS_TEXT_BASE=0x00700000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600"
CONFIG_BOOTDELAY=1
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xF8040000
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0

36
configs/spear600_nand_defconfig
View File

@ -1,36 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_TARGET_SPEAR600=y
CONFIG_SYS_TEXT_BASE=0x00700000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x60000
CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600"
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0

38
configs/spear600_usbtty_defconfig
View File

@ -1,38 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_TARGET_SPEAR600=y
CONFIG_SYS_TEXT_BASE=0x00700000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY"
CONFIG_BOOTDELAY=-1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock3 rootfstype=jffs2"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_ENV_ADDR=0xF8040000
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_USB=y
CONFIG_USB_GADGET=y

38
configs/spear600_usbtty_nand_defconfig
View File

@ -1,38 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_TARGET_SPEAR600=y
CONFIG_SYS_TEXT_BASE=0x00700000
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x60000
CONFIG_IDENT_STRING="-SPEAr"
CONFIG_SYS_EXTRA_OPTIONS="SPEAR600,USBTTY"
CONFIG_BOOTDELAY=-1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 mem=128M root=/dev/mtdblock7 rootfstype=jffs2"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
# CONFIG_AUTO_COMPLETE is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_ENV_OVERWRITE=y
CONFIG_ENV_IS_IN_NAND=y
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_NATSEMI=y
CONFIG_PHY_GIGE=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_CONS_INDEX=0
CONFIG_USB=y
CONFIG_USB_GADGET=y

71
configs/x600_defconfig
View File

@ -1,71 +0,0 @@
CONFIG_ARM=y
CONFIG_ARCH_CPU_INIT=y
CONFIG_SYS_THUMB_BUILD=y
# CONFIG_SPL_USE_ARCH_MEMCPY is not set
# CONFIG_SPL_USE_ARCH_MEMSET is not set
CONFIG_TARGET_X600=y
CONFIG_SYS_TEXT_BASE=0x00800040
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_SPL_TEXT_BASE=0xd2800b00
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SYS_BOOTCOUNT_ADDR=0xD2801FF8
CONFIG_SPL=y
CONFIG_IDENT_STRING="-SPEAr"
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_AUTOBOOT_STOP_STR=" "
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_SPL_NOR_SUPPORT=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="X600> "
CONFIG_CMD_IMLS=y
CONFIG_LOOPW=y
CONFIG_CMD_MX_CYCLIC=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_I2C=y
CONFIG_CMD_NAND=y
CONFIG_CMD_SAVES=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_DHCP=y
CONFIG_CMD_MII=y
CONFIG_CMD_PING=y
CONFIG_CMD_CACHE=y
CONFIG_CMD_DATE=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
CONFIG_CMD_MTDPARTS=y
CONFIG_MTDIDS_DEFAULT="nand0=nand"
CONFIG_MTDPARTS_DEFAULT="mtdparts=nand:64M(ubi0),64M(ubi1)"
CONFIG_CMD_UBI=y
CONFIG_ENV_IS_IN_FLASH=y
CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
CONFIG_ENV_ADDR=0xF8060000
CONFIG_ENV_ADDR_REDUND=0xF8070000
CONFIG_BOOTCOUNT_LIMIT=y
CONFIG_FPGA_XILINX=y
CONFIG_FPGA_SPARTAN3=y
CONFIG_SYS_I2C_DW=y
# CONFIG_MMC is not set
CONFIG_MTD=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_MTD_RAW_NAND=y
CONFIG_PHY_ADDR_ENABLE=y
CONFIG_PHY_MICREL=y
CONFIG_PHY_MICREL_KSZ90X1=y
CONFIG_ETH_DESIGNWARE=y
CONFIG_MII=y
CONFIG_RTC_M41T62=y
CONFIG_CONS_INDEX=0
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_STORAGE=y
CONFIG_BCH=y
CONFIG_OF_LIBFDT=y

74
doc/README.spear
View File

@ -1,74 +0,0 @@
SPEAr (Structured Processor Enhanced Architecture).
SPEAr600 is also known as SPEArPlus and SPEAr300 is also known as SPEArBasic
The SPEAr SoC family embeds a customizable logic that can be programmed
one-time by a customer at silicon mask level (i.e. not at runtime!).
U-Boot supports four SoCs: SPEAr600, SPEAr3xx
All 4 SoCs (SPEAr3xx and SPEAr600) share common peripherals. SPEAr300 and
SPEAr600 do not have EMI.
1. ARM926ejs core based (sp600 has two cores, the 2nd handled only in Linux)
2. FastEthernet (sp600 has Gbit version, but same controller - GMAC)
3. USB Host
4. USB Device
5. NAND controller (FSMC)
6. Serial NOR ctrl
7. I2C
8. SPI
9. CLCD
10. others ..
Everything is supported in Linux.
u-boot is currently not supporting all peripeharls (just a few as listed below).
1. USB Device
2. NAND controller (FSMC)
3. Serial Memory Interface
4. EMI (Parallel NOR interface)
4. I2C
5. UART
Build options
make spear320_config
spear320 build with environment variables placed at default
location i.e. Serial NOR device
make spear320_pnor_config
This option generates a uboot image that supports emi controller
for CFI compliant parallel NOR flash. Environment variables are
placed in Parallel NOR device
make spear320_nand_config
spear320 build with environment variables placed in NAND device
make spear320_usbtty_config
spear320 build with usbtty terminal as default and environment
placed at default location
make spear320_usbtty_pnor_config
spear320 build with usbtty terminal as default and environment
placed in pnor device
make spear320_usbtty_nand_config
Build with usbtty terminal as default and environment placed in
NAND device
make spear300_config
make spear300_nand_config
make spear300_usbtty_config
make spear300_usbtty_nand_config
make spear310_config
make spear310_pnor_config
make spear310_nand_config
make spear310_usbtty_config
make spear310_usbtty_pnor_config
make spear310_usbtty_nand_config
make spear600_config
make spear600_nand_config
make spear600_usbtty_config
make spear600_usbtty_nand_config
Mac id storage and retrieval in spear platforms
Please read doc/README.enetaddr for the implementation guidelines for mac id
usage. Basically, environment has precedence over board specific storage. The
ethaddr beeing used for the network interface is always taken only from
environment variables. Although, we can check the mac id programmed in i2c
memory by using chip_config command

1
drivers/gpio/Makefile
View File

@ -33,7 +33,6 @@ obj-$(CONFIG_RCAR_GPIO) += gpio-rcar.o
obj-$(CONFIG_RZA1_GPIO) += gpio-rza1.o obj-$(CONFIG_RZA1_GPIO) += gpio-rza1.o
obj-$(CONFIG_S5P) += s5p_gpio.o obj-$(CONFIG_S5P) += s5p_gpio.o
obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o obj-$(CONFIG_SANDBOX_GPIO) += sandbox.o
obj-$(CONFIG_SPEAR_GPIO) += spear_gpio.o
obj-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o obj-$(CONFIG_TEGRA_GPIO) += tegra_gpio.o
obj-$(CONFIG_TEGRA186_GPIO) += tegra186_gpio.o obj-$(CONFIG_TEGRA186_GPIO) += tegra186_gpio.o
obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o obj-$(CONFIG_DA8XX_GPIO) += da8xx_gpio.o

89
drivers/gpio/spear_gpio.c
View File

@ -1,89 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2012 Stefan Roese <sr@denx.de>
*/
/*
* Driver for SPEAr600 GPIO controller
*/
#include <common.h>
#include <malloc.h>
#include <asm/arch/hardware.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <errno.h>
static int gpio_direction(unsigned gpio,
enum gpio_direction direction)
{
struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE;
u32 val;
val = readl(&regs->gpiodir);
if (direction == GPIO_DIRECTION_OUT)
val |= 1 << gpio;
else
val &= ~(1 << gpio);
writel(val, &regs->gpiodir);
return 0;
}
int gpio_set_value(unsigned gpio, int value)
{
struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE;
if (value)
writel(1 << gpio, &regs->gpiodata[DATA_REG_ADDR(gpio)]);
else
writel(0, &regs->gpiodata[DATA_REG_ADDR(gpio)]);
return 0;
}
int gpio_get_value(unsigned gpio)
{
struct gpio_regs *regs = (struct gpio_regs *)CONFIG_GPIO_BASE;
u32 val;
val = readl(&regs->gpiodata[DATA_REG_ADDR(gpio)]);
return !!val;
}
int gpio_request(unsigned gpio, const char *label)
{
if (gpio >= SPEAR_GPIO_COUNT)
return -EINVAL;
return 0;
}
int gpio_free(unsigned gpio)
{
return 0;
}
void gpio_toggle_value(unsigned gpio)
{
gpio_set_value(gpio, !gpio_get_value(gpio));
}
int gpio_direction_input(unsigned gpio)
{
return gpio_direction(gpio, GPIO_DIRECTION_IN);
}
int gpio_direction_output(unsigned gpio, int value)
{
int ret = gpio_direction(gpio, GPIO_DIRECTION_OUT);
if (ret < 0)
return ret;
gpio_set_value(gpio, value);
return 0;
}

10
drivers/i2c/Kconfig
View File

@ -136,16 +136,6 @@ config SYS_I2C_DW
controller is used in various SoCs, e.g. the ST SPEAr, Altera controller is used in various SoCs, e.g. the ST SPEAr, Altera
SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs. SoCFPGA, Synopsys ARC700 and some Intel x86 SoCs.
config SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
bool "DW I2C Enable Status Register not supported"
depends on SYS_I2C_DW && \
(TARGET_SPEAR600 || TARGET_X600)
default y
help
Some versions of the Designware I2C controller do not support the
enable status register. This config option can be enabled in such
cases.
config SYS_I2C_ASPEED config SYS_I2C_ASPEED
bool "Aspeed I2C Controller" bool "Aspeed I2C Controller"
depends on DM_I2C && ARCH_ASPEED depends on DM_I2C && ARCH_ASPEED

11
drivers/i2c/designware_i2c.c
View File

@ -24,16 +24,6 @@
*/ */
#define DW_I2C_COMP_TYPE 0x44570140 #define DW_I2C_COMP_TYPE 0x44570140
#ifdef CONFIG_SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED
static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable)
{
u32 ena = enable ? IC_ENABLE_0B : 0;
writel(ena, &i2c_base->ic_enable);
return 0;
}
#else
static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable) static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable)
{ {
u32 ena = enable ? IC_ENABLE_0B : 0; u32 ena = enable ? IC_ENABLE_0B : 0;
@ -55,7 +45,6 @@ static int dw_i2c_enable(struct i2c_regs *i2c_base, bool enable)
return -ETIMEDOUT; return -ETIMEDOUT;
} }
#endif
/* High and low times in different speed modes (in ns) */ /* High and low times in different speed modes (in ns) */
enum { enum {

49
drivers/mtd/nand/raw/fsmc_nand.c
View File

@ -389,55 +389,6 @@ static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
return 0; return 0;
} }
#ifndef CONFIG_SPL_BUILD
/*
* fsmc_nand_switch_ecc - switch the ECC operation between different engines
*
* @eccstrength - the number of bits that could be corrected
* (1 - HW, 4 - SW BCH4)
*/
int fsmc_nand_switch_ecc(uint32_t eccstrength)
{
struct nand_chip *nand;
struct mtd_info *mtd;
int err;
/*
* This functions is only called on SPEAr600 platforms, supporting
* 1 bit HW ECC. The BCH8 HW ECC (FSMC_VER8) from the ST-Ericsson
* Nomadik SoC is currently supporting this fsmc_nand_switch_ecc()
* function, as it doesn't need to switch to a different ECC layout.
*/
mtd = get_nand_dev_by_index(nand_curr_device);
nand = mtd_to_nand(mtd);
/* Setup the ecc configurations again */
if (eccstrength == 1) {
nand->ecc.mode = NAND_ECC_HW;
nand->ecc.bytes = 3;
nand->ecc.strength = 1;
nand->ecc.layout = &fsmc_ecc1_layout;
nand->ecc.calculate = fsmc_read_hwecc;
nand->ecc.correct = nand_correct_data;
} else if (eccstrength == 4) {
/*
* .calculate .correct and .bytes will be set in
* nand_scan_tail()
*/
nand->ecc.mode = NAND_ECC_SOFT_BCH;
nand->ecc.strength = 4;
nand->ecc.layout = NULL;
} else {
printf("Error: ECC strength %d not supported!\n", eccstrength);
}
/* Update NAND handling after ECC mode switch */
err = nand_scan_tail(mtd);
return err;
}
#endif /* CONFIG_SPL_BUILD */
int fsmc_nand_init(struct nand_chip *nand) int fsmc_nand_init(struct nand_chip *nand)
{ {
static int chip_nr; static int chip_nr;

1
drivers/usb/host/Makefile
View File

@ -36,7 +36,6 @@ obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o obj-$(CONFIG_USB_EHCI_MSM) += ehci-msm.o
obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o obj-$(CONFIG_USB_EHCI_VCT) += ehci-vct.o
obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o obj-$(CONFIG_USB_EHCI_VF) += ehci-vf.o

77
drivers/usb/host/ehci-spear.c
View File

@ -1,77 +0,0 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2010
* Armando Visconti, ST Micoelectronics, <armando.visconti@st.com>.
*
* (C) Copyright 2009
* Marvell Semiconductor <www.marvell.com>
* Written-by: Prafulla Wadaskar <prafulla@marvell.com>
*/
#include <common.h>
#include <log.h>
#include <asm/io.h>
#include <usb.h>
#include <linux/delay.h>
#include "ehci.h"
#include <asm/arch/hardware.h>
#include <asm/arch/spr_misc.h>
static void spear6xx_usbh_stop(void)
{
struct misc_regs *const misc_p =
(struct misc_regs *)CONFIG_SPEAR_MISCBASE;
u32 periph1_rst = readl(misc_p->periph1_rst);
periph1_rst |= PERIPH_USBH1 | PERIPH_USBH2;
writel(periph1_rst, misc_p->periph1_rst);
udelay(1000);
periph1_rst &= ~(PERIPH_USBH1 | PERIPH_USBH2);
writel(periph1_rst, misc_p->periph1_rst);
}
/*
* Create the appropriate control structures to manage
* a new EHCI host controller.
*/
int ehci_hcd_init(int index, enum usb_init_type init,
struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
u32 ehci = 0;
switch (index) {
case 0:
ehci = CONFIG_SYS_UHC0_EHCI_BASE;
break;
case 1:
ehci = CONFIG_SYS_UHC1_EHCI_BASE;
break;
default:
printf("ERROR: wrong controller index!\n");
break;
};
*hccr = (struct ehci_hccr *)(ehci + 0x100);
*hcor = (struct ehci_hcor *)((uint32_t) *hccr +
HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
debug("SPEAr-ehci: init hccr %x and hcor %x hc_length %d\n",
(uint32_t)*hccr, (uint32_t)*hcor,
(uint32_t)HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase)));
return 0;
}
/*
* Destroy the appropriate control structures corresponding
* the the EHCI host controller.
*/
int ehci_hcd_stop(int index)
{
#if defined(CONFIG_SPEAR600)
spear6xx_usbh_stop();
#endif
return 0;
}

162
include/configs/spear-common.h
View File

@ -1,162 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
*/
#ifndef _SPEAR_COMMON_H
#define _SPEAR_COMMON_H
/*
* Common configurations used for both spear3xx as well as spear6xx
*/
/* U-Boot Load Address */
/* Ethernet driver configuration */
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
/* USBD driver configuration */
#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_DW_UDC
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_HS
#define CONFIG_USB_TTY
#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
#endif
#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
/* I2C driver configuration */
#define CONFIG_SYS_I2C
#if defined(CONFIG_SPEAR600)
#define CONFIG_SYS_I2C_BASE 0xD0200000
#endif
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02
#define CONFIG_I2C_CHIPADDRESS 0x50
/* Timer, HZ specific defines */
/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
#define CONFIG_SPEAR_EMI
#else
#define CONFIG_ST_SMI
#endif
#if defined(CONFIG_ST_SMI)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BASE 0xF8000000
#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
CONFIG_SYS_CS1_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
#endif
/*
* Serial Configuration (PL011)
* CONFIG_PL01x_PORTS is defined in specific files
*/
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
57600, 115200 }
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* NAND FLASH Configuration */
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_NAND_FSMC
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_ONFI_DETECTION
/*
* Default Environment Varible definitions
*/
/*
* U-Boot Environment placing definitions.
*/
#if defined(CONFIG_ENV_IS_IN_FLASH)
#ifdef CONFIG_ST_SMI
/*
* Environment is in serial NOR flash
*/
#define CONFIG_SYS_MONITOR_LEN 0x00040000
#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
#elif defined(CONFIG_SPEAR_EMI)
/*
* Environment is in parallel NOR flash
*/
#define CONFIG_SYS_MONITOR_LEN 0x00060000
#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
"0x4C0000; bootm 0x1600000"
#endif
#elif defined(CONFIG_ENV_IS_IN_NAND)
/*
* Environment is in NAND
*/
#define CONFIG_ENV_RANGE 0x10000
#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
"0x80000 0x4C0000; " \
"bootm 0x1600000"
#endif
#define CONFIG_NFSBOOTCOMMAND \
"bootp; " \
"setenv bootargs root=/dev/nfs rw " \
"nfsroot=$(serverip):$(rootpath) " \
"ip=$(ipaddr):$(serverip):$(gatewayip):" \
"$(netmask):$(hostname):$(netdev):off " \
"console=ttyAMA0,115200 $(othbootargs);" \
"bootm; "
#define CONFIG_RAMBOOTCOMMAND \
"setenv bootargs root=/dev/ram rw " \
"console=ttyAMA0,115200 $(othbootargs);" \
CONFIG_BOOTCOMMAND
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* Miscellaneous configurable options */
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_MALLOC_LEN (1024*1024)
#define CONFIG_SYS_LOAD_ADDR 0x00800000
#define CONFIG_SYS_FLASH_EMPTY_INFO
/* Physical Memory Map */
#define PHYS_SDRAM_1 0x00000000
#define PHYS_SDRAM_1_MAXSIZE 0x40000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
#endif

36
include/configs/spear6xx_evb.h
View File

@ -1,36 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* (C) Copyright 2009
* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#if defined(CONFIG_USBTTY)
#define CONFIG_SPEAR_USBTTY
#endif
#include <configs/spear-common.h>
/* Serial Configuration (PL011) */
#define CONFIG_SYS_SERIAL0 0xD0000000
#define CONFIG_SYS_SERIAL1 0xD0080000
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1 }
/* NAND flash configuration */
#define CONFIG_SYS_FSMC_NAND_SP
#define CONFIG_SYS_FSMC_NAND_8BIT
#define CONFIG_SYS_NAND_BASE 0xD2000000
/* Ethernet PHY configuration */
/* Environment Settings */
#define CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_USBTTY
#endif /* __CONFIG_H */

228
include/configs/x600.h
View File

@ -1,228 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2009, STMicroelectronics - All Rights Reserved
* Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
*
* Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
*/
#ifndef __CONFIG_H
#define __CONFIG_H
/*
* High Level Configuration Options
* (easy to change)
*/
#define CONFIG_SPEAR600 /* SPEAr600 SoC */
#define CONFIG_X600 /* on X600 board */
#include <asm/arch/hardware.h>
/* Timer, HZ specific defines */
#define CONFIG_SYS_HZ_CLOCK 8300000
#define CONFIG_SYS_FLASH_BASE 0xf8000000
/* Reserve 8KiB for SPL */
#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */
#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
CONFIG_SYS_SPL_LEN)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN 0x60000
/* Serial Configuration (PL011) */
#define CONFIG_SYS_SERIAL0 0xD0000000
#define CONFIG_SYS_SERIAL1 0xD0080000
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
(void *)CONFIG_SYS_SERIAL1 }
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
57600, 115200 }
#define CONFIG_SYS_LOADS_BAUD_CHANGE
/* NOR FLASH config options */
#define CONFIG_ST_SMI
#define CONFIG_SYS_MAX_FLASH_BANKS 1
#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE }
#define CONFIG_SYS_MAX_FLASH_SECT 128
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
/* NAND FLASH config options */
#define CONFIG_NAND_FSMC
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE
#define CONFIG_MTD_ECC_SOFT
#define CONFIG_SYS_FSMC_NAND_8BIT
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_NAND_ECC_BCH
/* UBI/UBI config options */
/* Ethernet config options */
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
#define CONFIG_SPEAR_GPIO
/* I2C config options */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_BASE 0xD0200000
#define CONFIG_SYS_I2C_SPEED 400000
#define CONFIG_SYS_I2C_SLAVE 0x02
#define CONFIG_I2C_CHIPADDRESS 0x50
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
/* FPGA config options */
#define CONFIG_FPGA_COUNT 1
/* USB EHCI options */
#define CONFIG_USB_EHCI_SPEAR
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
/*
* U-Boot Environment placing definitions.
*/
/* Miscellaneous configurable options */
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_SYS_MALLOC_LEN (8 << 20)
#define CONFIG_SYS_LOAD_ADDR 0x00800000
#define CONFIG_HOSTNAME "x600"
#define CONFIG_UBI_PART ubi0
#define CONFIG_UBIFS_VOLUME rootfs
#define CONFIG_EXTRA_ENV_SETTINGS \
"u-boot_addr=1000000\0" \
"u-boot=" CONFIG_HOSTNAME "/u-boot.spr\0" \
"load=tftp ${u-boot_addr} ${u-boot}\0" \
"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize};" \
"erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
"cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
" ${filesize};" \
"protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
" +${filesize}\0" \
"upd=run load update\0" \
"ubifs=" CONFIG_HOSTNAME "/ubifs.img\0" \
"part=" __stringify(CONFIG_UBI_PART) "\0" \
"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
"load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
" ${filesize}\0" \
"upd_ubifs=run load_ubifs update_ubifs\0" \
"init_ubifs=nand erase.part ubi0;ubi part ${part};" \
"ubi create ${vol} 4000000\0" \
"netdev=eth0\0" \
"rootpath=/opt/eldk-4.2/arm\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
"boot_part=0\0" \
"altbootcmd=if test $boot_part -eq 0;then " \
"echo Switching to partition 1!;" \
"setenv boot_part 1;" \
"else; " \
"echo Switching to partition 0!;" \
"setenv boot_part 0;" \
"fi;" \
"saveenv;boot\0" \
"ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
"root=ubi0:rootfs rootfstype=ubifs\0" \
"kernel=" CONFIG_HOSTNAME "/uImage\0" \
"kernel_fs=/boot/uImage \0" \
"kernel_addr=1000000\0" \
"dtb=" CONFIG_HOSTNAME "/" \
CONFIG_HOSTNAME ".dtb\0" \
"dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0" \
"dtb_addr=1800000\0" \
"load_kernel=tftp ${kernel_addr} ${kernel}\0" \
"load_dtb=tftp ${dtb_addr} ${dtb}\0" \
"addip=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addcon=setenv bootargs ${bootargs} console=ttyAMA0," \
"${baudrate}\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"net_nfs=run load_dtb load_kernel; " \
"run nfsargs addip addcon addmtd addmisc;" \
"bootm ${kernel_addr} - ${dtb_addr}\0" \
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
" addcon addmisc addmtd;" \
"bootm ${kernel_addr} - ${dtb_addr}\0" \
"ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \
"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
"ubifsload ${dtb_addr} ${dtb_fs};\0" \
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
"addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \
"bootcmd=run nand_ubifs\0" \
"\0"
/* Physical Memory Map */
#define PHYS_SDRAM_1 0x00000000
#define PHYS_SDRAM_1_MAXSIZE 0x40000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SRAM_BASE 0xd2800000
/* Preserve the last 2 lwords for the boot-counter */
#define CONFIG_SRAM_SIZE ((8 << 10) - 0x8)
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SRAM_BASE
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/*
* SPL related defines
*/
#define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00)
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
/*
* Please select/define only one of the following
* Each definition corresponds to a supported DDR chip.
* DDR configuration is based on the following selection
*/
#define CONFIG_DDR_MT47H64M16 1
#define CONFIG_DDR_MT47H32M16 0
#define CONFIG_DDR_MT47H128M8 0
/*
* Synchronous/Asynchronous operation of DDR
*
* Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
* Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
* Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
*/
#define CONFIG_DDR_2HCLK 1
#define CONFIG_DDR_HCLK 0
#define CONFIG_DDR_PLL2 0
/*
* xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
* or not. Modify/Add to only these macros to define new boot types
*/
#define USB_BOOT_SUPPORTED 0
#define PCIE_BOOT_SUPPORTED 0
#define SNOR_BOOT_SUPPORTED 1
#define NAND_BOOT_SUPPORTED 1
#define PNOR_BOOT_SUPPORTED 0
#define TFTP_BOOT_SUPPORTED 0
#define UART_BOOT_SUPPORTED 0
#define SPI_BOOT_SUPPORTED 0
#define I2C_BOOT_SUPPORTED 0
#define MMC_BOOT_SUPPORTED 0
#endif /* __CONFIG_H */