sunxi: dts: arm: update devicetree files from Linux v6.2-rc2

Sync the devicetree files from the Linux kernel repo, v6.2-rc2.
This is covering the 32-bit SoCs, from arch/arm/boot/dts.

This enables some new devices for the F1C100s family, though this is of
little relevance to U-Boot itself.
The H3 gains the "phys" property for the first USB controller, which
prevents an error message when U-Boot's USB stack comes up, and allows
using this port in host mode.

As before, this omits the non-backwards compatible changes to the R_INTC
controller, to remain compatible with older kernels.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>

arch/arm/dts/suniv-f1c100s.dtsi

@@ -166,6 +166,12 @@
 				drive-strength = <30>;
 			};
 
+			/omit-if-no-ref/
+			i2c0_pd_pins: i2c0-pd-pins {
+				pins = "PD0", "PD12";
+				function = "i2c0";
+			};
+
 			spi0_pc_pins: spi0-pc-pins {
 				pins = "PC0", "PC1", "PC2", "PC3";
 				function = "spi0";
@@ -177,6 +183,42 @@
 			};
 		};
 
+		i2c0: i2c@1c27000 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27000 0x400>;
+			interrupts = <7>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@1c27400 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27400 0x400>;
+			interrupts = <8>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@1c27800 {
+			compatible = "allwinner,suniv-f1c100s-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x01c27800 0x400>;
+			interrupts = <9>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		timer@1c20c00 {
 			compatible = "allwinner,suniv-f1c100s-timer";
 			reg = <0x01c20c00 0x90>;
@@ -192,6 +234,34 @@
 			clocks = <&osc32k>;
 		};
 
+		pwm: pwm@1c21000 {
+			compatible = "allwinner,suniv-f1c100s-pwm",
+				     "allwinner,sun7i-a20-pwm";
+			reg = <0x01c21000 0x400>;
+			clocks = <&osc24M>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
+		ir: ir@1c22c00 {
+			compatible = "allwinner,suniv-f1c100s-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x01c22c00 0x400>;
+			clocks = <&ccu CLK_BUS_IR>, <&ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&ccu RST_BUS_IR>;
+			interrupts = <6>;
+			status = "disabled";
+		};
+
+		lradc: lradc@1c23400 {
+			compatible = "allwinner,suniv-f1c100s-lradc",
+				     "allwinner,sun8i-a83t-r-lradc";
+			reg = <0x01c23400 0x400>;
+			interrupts = <22>;
+			status = "disabled";
+		};
+
 		uart0: serial@1c25000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x01c25000 0x400>;

arch/arm/dts/sunxi-h3-h5.dtsi

@@ -302,6 +302,8 @@
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 
@@ -312,6 +314,8 @@
 			clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>,
 				 <&ccu CLK_USB_OHCI0>;
 			resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>;
+			phys = <&usbphy 0>;
+			phy-names = "usb";
 			status = "disabled";
 		};
 

include/dt-bindings/clock/suniv-ccu-f1c100s.h

@@ -67,4 +67,6 @@
 #define CLK_CODEC		65
 #define CLK_AVS			66
 
+#define CLK_IR			67
+
 #endif