diff --git a/arch/arm/dts/imx6q-ba16.dtsi b/arch/arm/dts/imx6q-ba16.dtsi
index 7d8f61f2fd..9da2bb6e86 100644
--- a/arch/arm/dts/imx6q-ba16.dtsi
+++ b/arch/arm/dts/imx6q-ba16.dtsi
@@ -174,6 +174,17 @@
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii-id";
 	status = "okay";
+	phy-handle = <&phy0>;
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &hdmi {
diff --git a/board/ge/bx50v3/bx50v3.c b/board/ge/bx50v3/bx50v3.c
index a3ae037a82..3ea9425fd1 100644
--- a/board/ge/bx50v3/bx50v3.c
+++ b/board/ge/bx50v3/bx50v3.c
@@ -47,6 +47,10 @@ DECLARE_GLOBAL_DATA_PTR;
 #define VPD_PRODUCT_B650 2
 #define VPD_PRODUCT_B450 3
 
+#define AR8033_DBG_REG_ADDR		0x1d
+#define AR8033_DBG_REG_DATA		0x1e
+#define AR8033_SERDES_REG		0x5
+
 static int productid;  /* Default to generic. */
 static struct vpd_cache vpd;
 
@@ -61,31 +65,16 @@ int dram_init(void)
 	return 0;
 }
 
-static int mx6_rgmii_rework(struct phy_device *phydev)
-{
-	/* Configure AR8033 to ouput a 125MHz clk from CLK_25M */
-	/* set device address 0x7 */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
-	/* offset 0x8016: CLK_25M Clock Select */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
-	/* enable register write, no post increment, address 0x7 */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
-	/* set to 125 MHz from local PLL source */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x18);
-
-	/* rgmii tx clock delay enable */
-	/* set debug port address: SerDes Test and System Mode Control */
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x05);
-	/* enable rgmii tx clock delay */
-	/* set the reserved bits to avoid board specific voltage peak issue*/
-	phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x3D47);
-
-	return 0;
-}
-
 int board_phy_config(struct phy_device *phydev)
 {
-	mx6_rgmii_rework(phydev);
+	/*
+	 * Set reserved bits to avoid board specific voltage peak issue. The
+	 * value is a magic number provided directly by Qualcomm. Note, that
+	 * PHY driver will take control of BIT(8) in this register to control
+	 * TX clock delay, so we do not initialize that bit here.
+	 */
+	phy_write(phydev, MDIO_DEVAD_NONE, AR8033_DBG_REG_ADDR, AR8033_SERDES_REG);
+	phy_write(phydev, MDIO_DEVAD_NONE, AR8033_DBG_REG_DATA, 0x3c47);
 
 	if (phydev->drv->config)
 		phydev->drv->config(phydev);