configs: j721e_hs_evm_r5: sync up config with GP config

Sync up the high secure config against the latest general purpose
config. This re-enables booting up a j721e HS evm board.

Signed-off-by: Tero Kristo <kristo@kernel.org>

configs/j721e_hs_evm_r5_defconfig

@@ -4,11 +4,11 @@ CONFIG_TI_SECURE_DEVICE=y
 CONFIG_SPL_GPIO_SUPPORT=y
 CONFIG_SPL_LIBCOMMON_SUPPORT=y
 CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_SYS_MALLOC_F_LEN=0x55000
+CONFIG_SYS_MALLOC_F_LEN=0x70000
 CONFIG_SOC_K3_J721E=y
+CONFIG_K3_EARLY_CONS=y
 CONFIG_TARGET_J721E_R5_EVM=y
 CONFIG_ENV_SIZE=0x20000
-CONFIG_ENV_OFFSET=0x680000
 CONFIG_SYS_SPI_U_BOOT_OFFS=0x80000
 CONFIG_DM_GPIO=y
 CONFIG_SPL_DM_SPI=y
@@ -17,7 +17,6 @@ CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_SPL_STACK_R_ADDR=0x82000000
-CONFIG_ENV_OFFSET_REDUND=0x700000
 CONFIG_SPL_FS_FAT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
@@ -26,15 +25,18 @@ CONFIG_DEFAULT_DEVICE_TREE="k3-j721e-r5-common-proc-board"
 # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
 CONFIG_SPL_LOAD_FIT=y
 CONFIG_SPL_LOAD_FIT_ADDRESS=0x80080000
-CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_USE_BOOTCOMMAND=y
 # CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_SPL_BOARD_INIT=y
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_EARLY_BSS=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
+CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x400
 CONFIG_SPL_DMA=y
 CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_EXT4=y
 CONFIG_SPL_I2C_SUPPORT=y
 CONFIG_SPL_DM_MAILBOX=y
 CONFIG_SPL_DM_SPI_FLASH=y
@@ -48,8 +50,12 @@ CONFIG_SPL_REMOTEPROC=y
 CONFIG_SPL_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPL_SPI_LOAD=y
 CONFIG_SPL_THERMAL=y
+CONFIG_SPL_USB_GADGET=y
+CONFIG_SPL_DFU=y
+CONFIG_SYS_DFU_DATA_BUF_SIZE=0x5000
 CONFIG_SPL_YMODEM_SUPPORT=y
 CONFIG_HUSH_PARSER=y
+CONFIG_CMD_DFU=y
 # CONFIG_CMD_FLASH is not set
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
@@ -60,10 +66,7 @@ CONFIG_CMD_FAT=y
 CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_SYS_REDUNDAND_ENVIRONMENT=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_SYS_MMC_ENV_PART=1
 CONFIG_DM=y
 CONFIG_SPL_DM=y
 CONFIG_SPL_DM_SEQ_ALIAS=y
@@ -77,14 +80,19 @@ CONFIG_DMA_CHANNELS=y
 CONFIG_TI_K3_NAVSS_UDMA=y
 CONFIG_TI_SCI_PROTOCOL=y
 CONFIG_DA8XX_GPIO=y
+CONFIG_DM_PCA953X=y
 CONFIG_DM_I2C=y
 CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
 CONFIG_SYS_I2C_OMAP24XX=y
 CONFIG_DM_MAILBOX=y
 CONFIG_K3_SEC_PROXY=y
 CONFIG_FS_LOADER=y
+CONFIG_ESM_K3=y
 CONFIG_K3_AVS0=y
+CONFIG_ESM_PMIC=y
 CONFIG_DM_MMC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_SPL_MMC_HS200_SUPPORT=y
 CONFIG_MMC_SDHCI=y
 CONFIG_SPL_MMC_SDHCI_ADMA=y
 CONFIG_MMC_SDHCI_AM654=y
@@ -93,6 +101,8 @@ CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH_SFDP_SUPPORT=y
 CONFIG_SPI_FLASH_SOFT_RESET=y
 CONFIG_SPI_FLASH_SOFT_RESET_ON_BOOT=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_S28HS512T=y
 CONFIG_SPI_FLASH_STMICRO=y
 CONFIG_SPI_FLASH_MT35XU=y
 CONFIG_PINCTRL=y
@@ -126,6 +136,18 @@ CONFIG_DM_THERMAL=y
 CONFIG_TIMER=y
 CONFIG_SPL_TIMER=y
 CONFIG_OMAP_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_DM_USB_GADGET=y
+CONFIG_SPL_DM_USB_GADGET=y
+CONFIG_USB_CDNS3=y
+CONFIG_USB_CDNS3_GADGET=y
+CONFIG_SPL_USB_CDNS3_GADGET=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Texas Instruments"
+CONFIG_USB_GADGET_VENDOR_NUM=0x0451
+CONFIG_USB_GADGET_PRODUCT_NUM=0x6163
+CONFIG_USB_GADGET_DOWNLOAD=y
 CONFIG_FS_EXT4=y
 CONFIG_FS_FAT_MAX_CLUSTSIZE=16384
 CONFIG_TI_POWER_DOMAIN=y
@@ -134,4 +156,5 @@ CONFIG_LIB_RATIONAL=y
 CONFIG_SPL_LIB_RATIONAL=y
 CONFIG_SPL_CLK_K3_PLL=y
 CONFIG_SPL_CLK_K3=y
+CONFIG_K3_DM_FW=y
 CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y