LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

board: mx6sabresd: Remove non-DM code 

Since the mx6sabreauto has DM support, remove the unused non-DM code
from mx6sabresd board file.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
This commit is contained in:
Abel Vesa 2019-02-01 16:40:23 +00:00 committed by Stefano Babic
parent 4926c68b0e
commit 9da2dae03e
1 changed files with 0 additions and 50 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

50
board/freescale/mx6sabresd/mx6sabresd.c
View File

@ -563,63 +563,13 @@ int board_eth_init(bd_t *bis)
} }
#ifdef CONFIG_USB_EHCI_MX6 #ifdef CONFIG_USB_EHCI_MX6
#define USB_OTHERREGS_OFFSET 0x800
#define UCTRL_PWR_POL (1 << 9)
static iomux_v3_cfg_t const usb_otg_pads[] = {
IOMUX_PADS(PAD_EIM_D22__USB_OTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)),
IOMUX_PADS(PAD_ENET_RX_ER__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static iomux_v3_cfg_t const usb_hc1_pads[] = {
IOMUX_PADS(PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL)),
};
static void setup_usb(void) static void setup_usb(void)
{ {
SETUP_IOMUX_PADS(usb_otg_pads);
/* /*
* set daisy chain for otg_pin_id on 6q. * set daisy chain for otg_pin_id on 6q.
* for 6dl, this bit is reserved * for 6dl, this bit is reserved
*/ */
imx_iomux_set_gpr_register(1, 13, 1, 0); imx_iomux_set_gpr_register(1, 13, 1, 0);
SETUP_IOMUX_PADS(usb_hc1_pads);
}
int board_ehci_hcd_init(int port)
{
u32 *usbnc_usb_ctrl;
if (port > 1)
return -EINVAL;
usbnc_usb_ctrl = (u32 *)(USB_BASE_ADDR + USB_OTHERREGS_OFFSET +
port * 4);
setbits_le32(usbnc_usb_ctrl, UCTRL_PWR_POL);
return 0;
}
int board_ehci_power(int port, int on)
{
switch (port) {
case 0:
break;
case 1:
if (on)
gpio_direction_output(IMX_GPIO_NR(1, 29), 1);
else
gpio_direction_output(IMX_GPIO_NR(1, 29), 0);
break;
default:
printf("MXC USB port %d not yet supported\n", port);
return -EINVAL;
}
return 0;
} }
#endif #endif