- splash_source warning fix when building with 64-bit toolchains
- lq123p1jx31 and nv101wxmn51 compatible in simple panel driver - remove not used mb862xx driver - add Himax HX8238D panel driver - s/video_uc_platdata/video_uc_plat/ -----BEGIN PGP SIGNATURE----- iGwEABECACwWIQSC4hxrSoIUVfFO0kRM6ATMmsalXAUCYDOevA4cYWd1c3RAZGVu eC5kZQAKCRBM6ATMmsalXNaAAJ0RUysoiZFAddxyrW7otwe+xxmdTACbBcVXCPuX W41gJtQyftU4rMGbMoo= =iAX1 -----END PGP SIGNATURE----- Merge tag 'video-for-v2021.04-rc3' of https://gitlab.denx.de/u-boot/custodians/u-boot-video - splash_source warning fix when building with 64-bit toolchains - lq123p1jx31 and nv101wxmn51 compatible in simple panel driver - remove not used mb862xx driver - add Himax HX8238D panel driver - s/video_uc_platdata/video_uc_plat/
This commit is contained in:
Tom Rini
commit
a3ddc776fa
|
|
@ -26,14 +26,12 @@
|
||||||
#include <fdt_support.h>
|
#include <fdt_support.h>
|
||||||
#include <asm/io.h>
|
#include <asm/io.h>
|
||||||
#include <i2c.h>
|
#include <i2c.h>
|
||||||
#include <mb862xx.h>
|
|
||||||
#include <video_fb.h>
|
#include <video_fb.h>
|
||||||
#include "upm_table.h"
|
#include "upm_table.h"
|
||||||
|
|
||||||
DECLARE_GLOBAL_DATA_PTR;
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
extern flash_info_t flash_info[]; /* FLASH chips info */
|
extern flash_info_t flash_info[]; /* FLASH chips info */
|
||||||
extern GraphicDevice mb862xx;
|
|
||||||
|
|
||||||
void local_bus_init (void);
|
void local_bus_init (void);
|
||||||
ulong flash_get_size (ulong base, int banknum);
|
ulong flash_get_size (ulong base, int banknum);
|
||||||
|
|
@ -207,16 +205,6 @@ int ft_board_setup(void *blob, struct bd_info *bd)
|
||||||
val[i++] = gd->bd->bi_flashstart;
|
val[i++] = gd->bd->bi_flashstart;
|
||||||
val[i++] = gd->bd->bi_flashsize;
|
val[i++] = gd->bd->bi_flashsize;
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_MB862xx)
|
|
||||||
if (mb862xx.frameAdrs == CONFIG_SYS_LIME_BASE) {
|
|
||||||
/* Fixup LIME mapping */
|
|
||||||
val[i++] = 2; /* chip select number */
|
|
||||||
val[i++] = 0; /* always 0 */
|
|
||||||
val[i++] = CONFIG_SYS_LIME_BASE;
|
|
||||||
val[i++] = CONFIG_SYS_LIME_SIZE;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/* Fixup FPGA mapping */
|
/* Fixup FPGA mapping */
|
||||||
val[i++] = 3; /* chip select number */
|
val[i++] = 3; /* chip select number */
|
||||||
val[i++] = 0; /* always 0 */
|
val[i++] = 0; /* always 0 */
|
||||||
|
|
|
||||||
|
|
@ -37,7 +37,7 @@ static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
|
||||||
return -ENODEV;
|
return -ENODEV;
|
||||||
}
|
}
|
||||||
|
|
||||||
return spi_flash_read(sf, offset, read_size, (void *)bmp_load_addr);
|
return spi_flash_read(sf, offset, read_size, (void *)(uintptr_t)bmp_load_addr);
|
||||||
}
|
}
|
||||||
#else
|
#else
|
||||||
static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
|
static int splash_sf_read_raw(u32 bmp_load_addr, int offset, size_t read_size)
|
||||||
|
|
@ -98,7 +98,7 @@ static int splash_load_raw(struct splash_location *location, u32 bmp_load_addr)
|
||||||
if (res < 0)
|
if (res < 0)
|
||||||
return res;
|
return res;
|
||||||
|
|
||||||
bmp_hdr = (struct bmp_header *)bmp_load_addr;
|
bmp_hdr = (struct bmp_header *)(uintptr_t)bmp_load_addr;
|
||||||
bmp_size = le32_to_cpu(bmp_hdr->file_size);
|
bmp_size = le32_to_cpu(bmp_hdr->file_size);
|
||||||
|
|
||||||
if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
|
if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
|
||||||
|
|
|
||||||
|
|
@ -30,7 +30,7 @@ config VIDEO_PCI_DEFAULT_FB_SIZE
|
||||||
help
|
help
|
||||||
Generally, video drivers request the amount of memory they need for
|
Generally, video drivers request the amount of memory they need for
|
||||||
the frame buffer when they are bound, by setting the size field in
|
the frame buffer when they are bound, by setting the size field in
|
||||||
struct video_uc_platdata. That memory is then reserved for use after
|
struct video_uc_plat. That memory is then reserved for use after
|
||||||
relocation. But PCI drivers cannot be bound before relocation unless
|
relocation. But PCI drivers cannot be bound before relocation unless
|
||||||
they are mentioned in the devicetree.
|
they are mentioned in the devicetree.
|
||||||
|
|
||||||
|
|
@ -51,7 +51,7 @@ config VIDEO_COPY
|
||||||
U-Boot) and then copied to the hardware frame-buffer as needed.
|
U-Boot) and then copied to the hardware frame-buffer as needed.
|
||||||
|
|
||||||
To use this, your video driver must set @copy_base in
|
To use this, your video driver must set @copy_base in
|
||||||
struct video_uc_platdata.
|
struct video_uc_plat.
|
||||||
|
|
||||||
config BACKLIGHT_PWM
|
config BACKLIGHT_PWM
|
||||||
bool "Generic PWM based Backlight Driver"
|
bool "Generic PWM based Backlight Driver"
|
||||||
|
|
@ -160,6 +160,16 @@ config CONSOLE_TRUETYPE
|
||||||
With this option you can adjust the text size and use a variety of
|
With this option you can adjust the text size and use a variety of
|
||||||
fonts. Note that this is noticeably slower than with normal console.
|
fonts. Note that this is noticeably slower than with normal console.
|
||||||
|
|
||||||
|
config DM_PANEL_HX8238D
|
||||||
|
bool "Enable Himax HX-8238D LCD driver"
|
||||||
|
depends on DM_VIDEO
|
||||||
|
help
|
||||||
|
Support for HX-8238D LCD Panel
|
||||||
|
The HX8238-D is a single chip controller and driver LSI that
|
||||||
|
integrates the power circuit.
|
||||||
|
It can drive a maximum 960x240 dot graphics on a-TFT panel
|
||||||
|
displays in 16M colors with dithering.
|
||||||
|
|
||||||
config CONSOLE_TRUETYPE_SIZE
|
config CONSOLE_TRUETYPE_SIZE
|
||||||
int "TrueType font size"
|
int "TrueType font size"
|
||||||
depends on CONSOLE_TRUETYPE
|
depends on CONSOLE_TRUETYPE
|
||||||
|
|
|
||||||
|
|
@ -15,6 +15,7 @@ obj-$(CONFIG_VIDEO_MIPI_DSI) += dsi-host-uclass.o
|
||||||
obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
|
obj-$(CONFIG_DM_VIDEO) += video-uclass.o vidconsole-uclass.o
|
||||||
obj-$(CONFIG_DM_VIDEO) += video_bmp.o
|
obj-$(CONFIG_DM_VIDEO) += video_bmp.o
|
||||||
obj-$(CONFIG_PANEL) += panel-uclass.o
|
obj-$(CONFIG_PANEL) += panel-uclass.o
|
||||||
|
obj-$(CONFIG_PANEL_HX8238D) += hx8238d.o
|
||||||
obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o
|
obj-$(CONFIG_SIMPLE_PANEL) += simple_panel.o
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
|
@ -57,7 +58,6 @@ obj-$(CONFIG_VIDEO_LCD_ORISETECH_OTM8009A) += orisetech_otm8009a.o
|
||||||
obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
|
obj-$(CONFIG_VIDEO_LCD_RAYDIUM_RM68200) += raydium-rm68200.o
|
||||||
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
|
obj-$(CONFIG_VIDEO_LCD_SSD2828) += ssd2828.o
|
||||||
obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o
|
obj-$(CONFIG_VIDEO_LCD_TDO_TL070WSH30) += tdo-tl070wsh30.o
|
||||||
obj-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o
|
|
||||||
obj-${CONFIG_VIDEO_MESON} += meson/
|
obj-${CONFIG_VIDEO_MESON} += meson/
|
||||||
obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o
|
obj-${CONFIG_VIDEO_MIPI_DSI} += mipi_dsi.o
|
||||||
obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
|
obj-$(CONFIG_VIDEO_MVEBU) += mvebu_lcd.o
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,197 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* Copied from simple-panel
|
||||||
|
* Copyright (c) 2016 Google, Inc
|
||||||
|
* Written by Simon Glass <sjg@chromium.org>
|
||||||
|
* Copyright (c) 2018 Sjoerd Simons <sjoerd.simons@collabora.co.uk>
|
||||||
|
* Modified by Moses Christopher <BollavarapuMoses.Christopher@in.bosch.com>
|
||||||
|
*
|
||||||
|
* Panel Initialization for HX8238D panel from Himax
|
||||||
|
* Resolution: 320x240
|
||||||
|
* Color-Mode: RGB
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <dm.h>
|
||||||
|
#include <panel.h>
|
||||||
|
#include <spi.h>
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
/* Register Address */
|
||||||
|
#define HX8238D_OUTPUT_CTRL_ADDR 0x01
|
||||||
|
#define HX8238D_LCD_AC_CTRL_ADDR 0x02
|
||||||
|
#define HX8238D_POWER_CTRL_1_ADDR 0x03
|
||||||
|
#define HX8238D_DATA_CLR_CTRL_ADDR 0X04
|
||||||
|
#define HX8238D_FUNCTION_CTRL_ADDR 0x05
|
||||||
|
#define HX8238D_LED_CTRL_ADDR 0x08
|
||||||
|
#define HX8238D_CONT_BRIGHT_CTRL_ADDR 0x0A
|
||||||
|
#define HX8238D_FRAME_CYCLE_CTRL_ADDR 0x0B
|
||||||
|
#define HX8238D_POWER_CTRL_2_ADDR 0x0D
|
||||||
|
#define HX8238D_POWER_CTRL_3_ADDR 0x0E
|
||||||
|
#define HX8238D_GATE_SCAN_POS_ADDR 0x0F
|
||||||
|
#define HX8238D_HORIZONTAL_PORCH_ADDR 0x16
|
||||||
|
#define HX8238D_VERTICAL_PORCH_ADDR 0x17
|
||||||
|
#define HX8238D_POWER_CTRL_4_ADDR 0x1E
|
||||||
|
#define HX8238D_GAMMA_CTRL_1_ADDR 0x30
|
||||||
|
#define HX8238D_GAMMA_CTRL_2_ADDR 0x31
|
||||||
|
#define HX8238D_GAMMA_CTRL_3_ADDR 0x32
|
||||||
|
#define HX8238D_GAMMA_CTRL_4_ADDR 0x33
|
||||||
|
#define HX8238D_GAMMA_CTRL_5_ADDR 0x34
|
||||||
|
#define HX8238D_GAMMA_CTRL_6_ADDR 0x35
|
||||||
|
#define HX8238D_GAMMA_CTRL_7_ADDR 0x36
|
||||||
|
#define HX8238D_GAMMA_CTRL_8_ADDR 0x37
|
||||||
|
#define HX8238D_GAMMA_CTRL_9_ADDR 0x3A
|
||||||
|
#define HX8238D_GAMMA_CTRL_10_ADDR 0x3B
|
||||||
|
|
||||||
|
/* Register Data */
|
||||||
|
#define HX8238D_OUTPUT_CTRL 0x6300
|
||||||
|
#define HX8238D_LCD_AC_CTRL 0x0200
|
||||||
|
#define HX8238D_POWER_CTRL_1 0x6564
|
||||||
|
#define HX8238D_DATA_CLR_CTRL 0x04C7
|
||||||
|
#define HX8238D_FUNCTION_CTRL 0xA884
|
||||||
|
#define HX8238D_LED_CTRL 0x00CE
|
||||||
|
#define HX8238D_CONT_BRIGHT_CTRL 0x4008
|
||||||
|
#define HX8238D_FRAME_CYCLE_CTRL 0xD400
|
||||||
|
#define HX8238D_POWER_CTRL_2 0x3229
|
||||||
|
#define HX8238D_POWER_CTRL_3 0x1200
|
||||||
|
#define HX8238D_GATE_SCAN_POS 0x0000
|
||||||
|
#define HX8238D_HORIZONTAL_PORCH 0x9F80
|
||||||
|
#define HX8238D_VERTICAL_PORCH 0x3F02
|
||||||
|
#define HX8238D_POWER_CTRL_4 0x005C
|
||||||
|
|
||||||
|
/* Gamma Control */
|
||||||
|
#define HX8238D_GAMMA_CTRL_1 0x0103
|
||||||
|
#define HX8238D_GAMMA_CTRL_2 0x0407
|
||||||
|
#define HX8238D_GAMMA_CTRL_3 0x0705
|
||||||
|
#define HX8238D_GAMMA_CTRL_4 0x0002
|
||||||
|
#define HX8238D_GAMMA_CTRL_5 0x0505
|
||||||
|
#define HX8238D_GAMMA_CTRL_6 0x0303
|
||||||
|
#define HX8238D_GAMMA_CTRL_7 0x0707
|
||||||
|
#define HX8238D_GAMMA_CTRL_8 0x0100
|
||||||
|
#define HX8238D_GAMMA_CTRL_9 0x1F00
|
||||||
|
#define HX8238D_GAMMA_CTRL_10 0x000F
|
||||||
|
|
||||||
|
/* Primary SPI register identification, 011100 */
|
||||||
|
/* Select register, RS=0, RS=0 */
|
||||||
|
/* Write register, RS=1, RW=0 */
|
||||||
|
#define HX8238D_PRIMARY_SELECT_REG 0x70
|
||||||
|
#define HX8238D_PRIMARY_WRITE_REG (HX8238D_PRIMARY_SELECT_REG | (0x1 << 1))
|
||||||
|
|
||||||
|
#define HX8238D_REG_BIT_LEN 24
|
||||||
|
|
||||||
|
struct hx8238d_priv {
|
||||||
|
struct spi_slave *spi;
|
||||||
|
};
|
||||||
|
|
||||||
|
static int hx8238d_ofdata_to_platdata(struct udevice *dev)
|
||||||
|
{
|
||||||
|
struct hx8238d_priv *priv = dev_get_priv(dev);
|
||||||
|
|
||||||
|
priv->spi = dev_get_parent_priv(dev);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/* data[0] => REGISTER ADDRESS */
|
||||||
|
/* data[1] => REGISTER VALUE */
|
||||||
|
struct hx8238d_command {
|
||||||
|
u16 data[2];
|
||||||
|
};
|
||||||
|
|
||||||
|
static struct hx8238d_command hx8238d_init_commands[] = {
|
||||||
|
{ .data = { HX8238D_OUTPUT_CTRL_ADDR, HX8238D_OUTPUT_CTRL } },
|
||||||
|
{ .data = { HX8238D_LCD_AC_CTRL_ADDR, HX8238D_LCD_AC_CTRL } },
|
||||||
|
{ .data = { HX8238D_POWER_CTRL_1_ADDR, HX8238D_POWER_CTRL_1 } },
|
||||||
|
{ .data = { HX8238D_DATA_CLR_CTRL_ADDR, HX8238D_DATA_CLR_CTRL } },
|
||||||
|
{ .data = { HX8238D_FUNCTION_CTRL_ADDR, HX8238D_FUNCTION_CTRL } },
|
||||||
|
{ .data = { HX8238D_LED_CTRL_ADDR, HX8238D_LED_CTRL } },
|
||||||
|
{ .data = { HX8238D_CONT_BRIGHT_CTRL_ADDR, HX8238D_CONT_BRIGHT_CTRL } },
|
||||||
|
{ .data = { HX8238D_FRAME_CYCLE_CTRL_ADDR, HX8238D_FRAME_CYCLE_CTRL } },
|
||||||
|
{ .data = { HX8238D_POWER_CTRL_2_ADDR, HX8238D_POWER_CTRL_2 } },
|
||||||
|
{ .data = { HX8238D_POWER_CTRL_3_ADDR, HX8238D_POWER_CTRL_3 } },
|
||||||
|
{ .data = { HX8238D_GATE_SCAN_POS_ADDR, HX8238D_GATE_SCAN_POS } },
|
||||||
|
{ .data = { HX8238D_HORIZONTAL_PORCH_ADDR, HX8238D_HORIZONTAL_PORCH } },
|
||||||
|
{ .data = { HX8238D_VERTICAL_PORCH_ADDR, HX8238D_VERTICAL_PORCH } },
|
||||||
|
{ .data = { HX8238D_POWER_CTRL_4_ADDR, HX8238D_POWER_CTRL_4 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_1_ADDR, HX8238D_GAMMA_CTRL_1 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_2_ADDR, HX8238D_GAMMA_CTRL_2 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_3_ADDR, HX8238D_GAMMA_CTRL_3 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_4_ADDR, HX8238D_GAMMA_CTRL_4 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_5_ADDR, HX8238D_GAMMA_CTRL_5 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_6_ADDR, HX8238D_GAMMA_CTRL_6 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_7_ADDR, HX8238D_GAMMA_CTRL_7 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_8_ADDR, HX8238D_GAMMA_CTRL_8 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_9_ADDR, HX8238D_GAMMA_CTRL_9 } },
|
||||||
|
{ .data = { HX8238D_GAMMA_CTRL_10_ADDR, HX8238D_GAMMA_CTRL_10 } },
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Generate Primary Register Buffer for Register Select and Register Write
|
||||||
|
* First 6 MSB bits of Primary Register is represented with 011100
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
static void hx8238d_generate_reg_buffers(struct hx8238d_command command,
|
||||||
|
u8 *sr_buf, uint8_t *wr_buf)
|
||||||
|
{
|
||||||
|
struct hx8238d_command cmd = command;
|
||||||
|
|
||||||
|
sr_buf[0] = HX8238D_PRIMARY_SELECT_REG;
|
||||||
|
sr_buf[1] = (cmd.data[0] >> 8) & 0xff;
|
||||||
|
sr_buf[2] = (cmd.data[0]) & 0xff;
|
||||||
|
|
||||||
|
wr_buf[0] = HX8238D_PRIMARY_WRITE_REG;
|
||||||
|
wr_buf[1] = (cmd.data[1] >> 8) & 0xff;
|
||||||
|
wr_buf[2] = (cmd.data[1]) & 0xff;
|
||||||
|
}
|
||||||
|
|
||||||
|
static int hx8238d_probe(struct udevice *dev)
|
||||||
|
{
|
||||||
|
struct hx8238d_priv *priv = dev_get_priv(dev);
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = spi_claim_bus(priv->spi);
|
||||||
|
if (ret) {
|
||||||
|
debug("Failed to claim bus: %d\n", ret);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
for (int i = 0; i < ARRAY_SIZE(hx8238d_init_commands); i++) {
|
||||||
|
u8 sr_buf[3], wr_buf[3];
|
||||||
|
const struct hx8238d_command cmd = hx8238d_init_commands[i];
|
||||||
|
|
||||||
|
hx8238d_generate_reg_buffers(cmd, sr_buf, wr_buf);
|
||||||
|
ret = spi_xfer(priv->spi, HX8238D_REG_BIT_LEN, sr_buf, NULL,
|
||||||
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
||||||
|
if (ret) {
|
||||||
|
debug("Failed to select register %d\n", ret);
|
||||||
|
goto free;
|
||||||
|
}
|
||||||
|
|
||||||
|
ret = spi_xfer(priv->spi, HX8238D_REG_BIT_LEN, wr_buf, NULL,
|
||||||
|
SPI_XFER_BEGIN | SPI_XFER_END);
|
||||||
|
if (ret) {
|
||||||
|
debug("Failed to write value %d\n", ret);
|
||||||
|
goto free;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
free:
|
||||||
|
spi_release_bus(priv->spi);
|
||||||
|
return ret;
|
||||||
|
}
|
||||||
|
|
||||||
|
static const struct udevice_id hx8238d_ids[] = {
|
||||||
|
{ .compatible = "himax,hx8238d" },
|
||||||
|
{ }
|
||||||
|
};
|
||||||
|
|
||||||
|
U_BOOT_DRIVER(hx8238d) = {
|
||||||
|
.name = "hx8238d",
|
||||||
|
.id = UCLASS_PANEL,
|
||||||
|
.of_match = hx8238d_ids,
|
||||||
|
.ofdata_to_platdata = hx8238d_ofdata_to_platdata,
|
||||||
|
.probe = hx8238d_probe,
|
||||||
|
.priv_auto_alloc_size = sizeof(struct hx8238d_priv),
|
||||||
|
};
|
||||||
|
|
@ -1,486 +0,0 @@
|
||||||
// SPDX-License-Identifier: GPL-2.0+
|
|
||||||
/*
|
|
||||||
* (C) Copyright 2007
|
|
||||||
* DENX Software Engineering, Anatolij Gustschin, agust@denx.de
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* mb862xx.c - Graphic interface for Fujitsu CoralP/Lime
|
|
||||||
* PCI and video mode code was derived from smiLynxEM driver.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include <common.h>
|
|
||||||
#include <linux/delay.h>
|
|
||||||
|
|
||||||
#include <asm/io.h>
|
|
||||||
#include <env.h>
|
|
||||||
#include <pci.h>
|
|
||||||
#include <video_fb.h>
|
|
||||||
#include "videomodes.h"
|
|
||||||
#include <mb862xx.h>
|
|
||||||
|
|
||||||
#if defined(CONFIG_POST)
|
|
||||||
#include <post.h>
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Graphic Device
|
|
||||||
*/
|
|
||||||
GraphicDevice mb862xx;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* 32MB external RAM - 256K Chip MMIO = 0x1FC0000 ;
|
|
||||||
*/
|
|
||||||
#define VIDEO_MEM_SIZE 0x01FC0000
|
|
||||||
|
|
||||||
#if defined(CONFIG_PCI)
|
|
||||||
#if defined(CONFIG_VIDEO_CORALP)
|
|
||||||
|
|
||||||
static struct pci_device_id supported[] = {
|
|
||||||
{ PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_P },
|
|
||||||
{ PCI_VENDOR_ID_FUJITSU, PCI_DEVICE_ID_CORAL_PA },
|
|
||||||
{ }
|
|
||||||
};
|
|
||||||
|
|
||||||
/* Internal clock frequency divider table, index is mode number */
|
|
||||||
unsigned int fr_div[] = { 0x00000f00, 0x00000900, 0x00000500 };
|
|
||||||
#endif
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_CORALP)
|
|
||||||
#define rd_io in32r
|
|
||||||
#define wr_io out32r
|
|
||||||
#else
|
|
||||||
#define rd_io(addr) in_be32((volatile unsigned *)(addr))
|
|
||||||
#define wr_io(addr, val) out_be32((volatile unsigned *)(addr), (val))
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define HOST_RD_REG(off) rd_io((dev->frameAdrs + GC_HOST_BASE + (off)))
|
|
||||||
#define HOST_WR_REG(off, val) wr_io((dev->frameAdrs + GC_HOST_BASE + (off)), \
|
|
||||||
(val))
|
|
||||||
#define DISP_RD_REG(off) rd_io((dev->frameAdrs + GC_DISP_BASE + (off)))
|
|
||||||
#define DISP_WR_REG(off, val) wr_io((dev->frameAdrs + GC_DISP_BASE + (off)), \
|
|
||||||
(val))
|
|
||||||
#define DE_RD_REG(off) rd_io((dev->dprBase + (off)))
|
|
||||||
#define DE_WR_REG(off, val) wr_io((dev->dprBase + (off)), (val))
|
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_CORALP)
|
|
||||||
#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_GEO_FIFO)), (val))
|
|
||||||
#else
|
|
||||||
#define DE_WR_FIFO(val) wr_io((dev->dprBase + (GC_FIFO)), (val))
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#define L0PAL_WR_REG(idx, val) wr_io((dev->frameAdrs + \
|
|
||||||
(GC_DISP_BASE | GC_L0PAL0) + \
|
|
||||||
((idx) << 2)), (val))
|
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
|
|
||||||
static void gdc_sw_reset (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
|
|
||||||
HOST_WR_REG (GC_SRST, 0x1);
|
|
||||||
udelay(500);
|
|
||||||
video_hw_init ();
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
static void de_wait (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
int lc = 0x10000;
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Sync with software writes to framebuffer,
|
|
||||||
* try to reset if engine locked
|
|
||||||
*/
|
|
||||||
while (DE_RD_REG (GC_CTR) & 0x00000131)
|
|
||||||
if (lc-- < 0) {
|
|
||||||
gdc_sw_reset ();
|
|
||||||
puts ("gdc reset done after drawing engine lock.\n");
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
static void de_wait_slots (int slots)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
int lc = 0x10000;
|
|
||||||
|
|
||||||
/* Wait for free fifo slots */
|
|
||||||
while (DE_RD_REG (GC_IFCNT) < slots)
|
|
||||||
if (lc-- < 0) {
|
|
||||||
gdc_sw_reset ();
|
|
||||||
puts ("gdc reset done after drawing engine lock.\n");
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if !defined(CONFIG_VIDEO_CORALP)
|
|
||||||
static void board_disp_init (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
const gdc_regs *regs = board_get_regs ();
|
|
||||||
|
|
||||||
while (regs->index) {
|
|
||||||
DISP_WR_REG (regs->index, regs->value);
|
|
||||||
regs++;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Init drawing engine if accel enabled.
|
|
||||||
* Also clears visible framebuffer.
|
|
||||||
*/
|
|
||||||
static void de_init (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
|
|
||||||
int cf = (dev->gdfBytesPP == 1) ? 0x0000 : 0x8000;
|
|
||||||
|
|
||||||
dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
|
|
||||||
|
|
||||||
/* Setup mode and fbbase, xres, fg, bg */
|
|
||||||
de_wait_slots (2);
|
|
||||||
DE_WR_FIFO (0xf1010108);
|
|
||||||
DE_WR_FIFO (cf | 0x0300);
|
|
||||||
DE_WR_REG (GC_FBR, 0x0);
|
|
||||||
DE_WR_REG (GC_XRES, dev->winSizeX);
|
|
||||||
DE_WR_REG (GC_FC, 0x0);
|
|
||||||
DE_WR_REG (GC_BC, 0x0);
|
|
||||||
/* Reset clipping */
|
|
||||||
DE_WR_REG (GC_CXMIN, 0x0);
|
|
||||||
DE_WR_REG (GC_CXMAX, dev->winSizeX);
|
|
||||||
DE_WR_REG (GC_CYMIN, 0x0);
|
|
||||||
DE_WR_REG (GC_CYMAX, dev->winSizeY);
|
|
||||||
|
|
||||||
/* Clear framebuffer using drawing engine */
|
|
||||||
de_wait_slots (3);
|
|
||||||
DE_WR_FIFO (0x09410000);
|
|
||||||
DE_WR_FIFO (0x00000000);
|
|
||||||
DE_WR_FIFO (dev->winSizeY << 16 | dev->winSizeX);
|
|
||||||
/* sync with SW access to framebuffer */
|
|
||||||
de_wait ();
|
|
||||||
#else
|
|
||||||
unsigned int i, *p;
|
|
||||||
|
|
||||||
i = dev->winSizeX * dev->winSizeY;
|
|
||||||
p = (unsigned int *)dev->frameAdrs;
|
|
||||||
while (i--)
|
|
||||||
*p++ = 0;
|
|
||||||
#endif
|
|
||||||
}
|
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_CORALP)
|
|
||||||
/* use CCF and MMR parameters for Coral-P Eval. Board as default */
|
|
||||||
#ifndef CONFIG_SYS_MB862xx_CCF
|
|
||||||
#define CONFIG_SYS_MB862xx_CCF 0x00090000
|
|
||||||
#endif
|
|
||||||
#ifndef CONFIG_SYS_MB862xx_MMR
|
|
||||||
#define CONFIG_SYS_MB862xx_MMR 0x11d7fa13
|
|
||||||
#endif
|
|
||||||
|
|
||||||
unsigned int pci_video_init (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
pci_dev_t devbusfn;
|
|
||||||
u16 device;
|
|
||||||
|
|
||||||
if ((devbusfn = pci_find_devices (supported, 0)) < 0) {
|
|
||||||
puts("controller not present\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* PCI setup */
|
|
||||||
pci_write_config_dword (devbusfn, PCI_COMMAND,
|
|
||||||
(PCI_COMMAND_MEMORY | PCI_COMMAND_IO));
|
|
||||||
pci_read_config_dword (devbusfn, PCI_BASE_ADDRESS_0, &dev->frameAdrs);
|
|
||||||
dev->frameAdrs = pci_mem_to_phys (devbusfn, dev->frameAdrs);
|
|
||||||
|
|
||||||
if (dev->frameAdrs == 0) {
|
|
||||||
puts ("PCI config: failed to get base address\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
dev->pciBase = dev->frameAdrs;
|
|
||||||
|
|
||||||
puts("Coral-");
|
|
||||||
|
|
||||||
pci_read_config_word(devbusfn, PCI_DEVICE_ID, &device);
|
|
||||||
switch (device) {
|
|
||||||
case PCI_DEVICE_ID_CORAL_P:
|
|
||||||
puts("P\n");
|
|
||||||
break;
|
|
||||||
case PCI_DEVICE_ID_CORAL_PA:
|
|
||||||
puts("PA\n");
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
puts("Unknown\n");
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Setup clocks and memory mode for Coral-P(A) */
|
|
||||||
HOST_WR_REG(GC_CCF, CONFIG_SYS_MB862xx_CCF);
|
|
||||||
udelay(200);
|
|
||||||
HOST_WR_REG(GC_MMR, CONFIG_SYS_MB862xx_MMR);
|
|
||||||
udelay(100);
|
|
||||||
return dev->frameAdrs;
|
|
||||||
}
|
|
||||||
|
|
||||||
unsigned int card_init (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
unsigned int cf, videomode, div = 0;
|
|
||||||
unsigned long t1, hsync, vsync;
|
|
||||||
char *penv;
|
|
||||||
int tmp, i, bpp;
|
|
||||||
struct ctfb_res_modes *res_mode;
|
|
||||||
struct ctfb_res_modes var_mode;
|
|
||||||
|
|
||||||
memset (dev, 0, sizeof (GraphicDevice));
|
|
||||||
|
|
||||||
if (!pci_video_init ())
|
|
||||||
return 0;
|
|
||||||
|
|
||||||
tmp = 0;
|
|
||||||
videomode = 0x310;
|
|
||||||
/* get video mode via environment */
|
|
||||||
penv = env_get("videomode");
|
|
||||||
if (penv) {
|
|
||||||
/* decide if it is a string */
|
|
||||||
if (penv[0] <= '9') {
|
|
||||||
videomode = (int) simple_strtoul (penv, NULL, 16);
|
|
||||||
tmp = 1;
|
|
||||||
}
|
|
||||||
} else {
|
|
||||||
tmp = 1;
|
|
||||||
}
|
|
||||||
|
|
||||||
if (tmp) {
|
|
||||||
/* parameter are vesa modes, search params */
|
|
||||||
for (i = 0; i < VESA_MODES_COUNT; i++) {
|
|
||||||
if (vesa_modes[i].vesanr == videomode)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
if (i == VESA_MODES_COUNT) {
|
|
||||||
printf ("\tno VESA Mode found, fallback to mode 0x%x\n",
|
|
||||||
videomode);
|
|
||||||
i = 0;
|
|
||||||
}
|
|
||||||
res_mode = (struct ctfb_res_modes *)
|
|
||||||
&res_mode_init[vesa_modes[i].resindex];
|
|
||||||
if (vesa_modes[i].resindex > 2) {
|
|
||||||
puts ("\tUnsupported resolution, using default\n");
|
|
||||||
bpp = vesa_modes[1].bits_per_pixel;
|
|
||||||
div = fr_div[1];
|
|
||||||
}
|
|
||||||
bpp = vesa_modes[i].bits_per_pixel;
|
|
||||||
div = fr_div[vesa_modes[i].resindex];
|
|
||||||
} else {
|
|
||||||
res_mode = (struct ctfb_res_modes *) &var_mode;
|
|
||||||
bpp = video_get_params (res_mode, penv);
|
|
||||||
}
|
|
||||||
|
|
||||||
/* calculate hsync and vsync freq (info only) */
|
|
||||||
t1 = (res_mode->left_margin + res_mode->xres +
|
|
||||||
res_mode->right_margin + res_mode->hsync_len) / 8;
|
|
||||||
t1 *= 8;
|
|
||||||
t1 *= res_mode->pixclock;
|
|
||||||
t1 /= 1000;
|
|
||||||
hsync = 1000000000L / t1;
|
|
||||||
t1 *= (res_mode->upper_margin + res_mode->yres +
|
|
||||||
res_mode->lower_margin + res_mode->vsync_len);
|
|
||||||
t1 /= 1000;
|
|
||||||
vsync = 1000000000L / t1;
|
|
||||||
|
|
||||||
/* fill in Graphic device struct */
|
|
||||||
sprintf (dev->modeIdent, "%dx%dx%d %ldkHz %ldHz", res_mode->xres,
|
|
||||||
res_mode->yres, bpp, (hsync / 1000), (vsync / 1000));
|
|
||||||
printf ("\t%s\n", dev->modeIdent);
|
|
||||||
dev->winSizeX = res_mode->xres;
|
|
||||||
dev->winSizeY = res_mode->yres;
|
|
||||||
dev->memSize = VIDEO_MEM_SIZE;
|
|
||||||
|
|
||||||
switch (bpp) {
|
|
||||||
case 8:
|
|
||||||
dev->gdfIndex = GDF__8BIT_INDEX;
|
|
||||||
dev->gdfBytesPP = 1;
|
|
||||||
break;
|
|
||||||
case 15:
|
|
||||||
case 16:
|
|
||||||
dev->gdfIndex = GDF_15BIT_555RGB;
|
|
||||||
dev->gdfBytesPP = 2;
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
printf ("\t%d bpp configured, but only 8,15 and 16 supported\n",
|
|
||||||
bpp);
|
|
||||||
puts ("\tfallback to 15bpp\n");
|
|
||||||
dev->gdfIndex = GDF_15BIT_555RGB;
|
|
||||||
dev->gdfBytesPP = 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
/* Setup dot clock (internal pll, division rate) */
|
|
||||||
DISP_WR_REG (GC_DCM1, div);
|
|
||||||
/* L0 init */
|
|
||||||
cf = (dev->gdfBytesPP == 1) ? 0x00000000 : 0x80000000;
|
|
||||||
DISP_WR_REG (GC_L0M, ((dev->winSizeX * dev->gdfBytesPP) / 64) << 16 |
|
|
||||||
(dev->winSizeY - 1) | cf);
|
|
||||||
DISP_WR_REG (GC_L0OA0, 0x0);
|
|
||||||
DISP_WR_REG (GC_L0DA0, 0x0);
|
|
||||||
DISP_WR_REG (GC_L0DY_L0DX, 0x0);
|
|
||||||
DISP_WR_REG (GC_L0EM, 0x0);
|
|
||||||
DISP_WR_REG (GC_L0WY_L0WX, 0x0);
|
|
||||||
DISP_WR_REG (GC_L0WH_L0WW, (dev->winSizeY - 1) << 16 | dev->winSizeX);
|
|
||||||
|
|
||||||
/* Display timing init */
|
|
||||||
DISP_WR_REG (GC_HTP_A, (dev->winSizeX +
|
|
||||||
res_mode->left_margin +
|
|
||||||
res_mode->right_margin +
|
|
||||||
res_mode->hsync_len - 1) << 16);
|
|
||||||
DISP_WR_REG (GC_HDB_HDP_A, (dev->winSizeX - 1) << 16 |
|
|
||||||
(dev->winSizeX - 1));
|
|
||||||
DISP_WR_REG (GC_VSW_HSW_HSP_A, (res_mode->vsync_len - 1) << 24 |
|
|
||||||
(res_mode->hsync_len - 1) << 16 |
|
|
||||||
(dev->winSizeX +
|
|
||||||
res_mode->right_margin - 1));
|
|
||||||
DISP_WR_REG (GC_VTR_A, (dev->winSizeY + res_mode->lower_margin +
|
|
||||||
res_mode->upper_margin +
|
|
||||||
res_mode->vsync_len - 1) << 16);
|
|
||||||
DISP_WR_REG (GC_VDP_VSP_A, (dev->winSizeY-1) << 16 |
|
|
||||||
(dev->winSizeY +
|
|
||||||
res_mode->lower_margin - 1));
|
|
||||||
DISP_WR_REG (GC_WY_WX, 0x0);
|
|
||||||
DISP_WR_REG (GC_WH_WW, dev->winSizeY << 16 | dev->winSizeX);
|
|
||||||
/* Display enable, L0 layer */
|
|
||||||
DISP_WR_REG (GC_DCM1, 0x80010000 | div);
|
|
||||||
|
|
||||||
return dev->frameAdrs;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
|
|
||||||
#if !defined(CONFIG_VIDEO_CORALP)
|
|
||||||
int mb862xx_probe(unsigned int addr)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
unsigned int reg;
|
|
||||||
|
|
||||||
dev->frameAdrs = addr;
|
|
||||||
dev->dprBase = dev->frameAdrs + GC_DRAW_BASE;
|
|
||||||
|
|
||||||
/* Try to access GDC ID/Revision registers */
|
|
||||||
reg = HOST_RD_REG (GC_CID);
|
|
||||||
reg = HOST_RD_REG (GC_CID);
|
|
||||||
if (reg == 0x303) {
|
|
||||||
reg = DE_RD_REG(GC_REV);
|
|
||||||
reg = DE_RD_REG(GC_REV);
|
|
||||||
if ((reg & ~0xff) == 0x20050100)
|
|
||||||
return MB862XX_TYPE_LIME;
|
|
||||||
}
|
|
||||||
|
|
||||||
return 0;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
void *video_hw_init (void)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
|
|
||||||
puts ("Video: Fujitsu ");
|
|
||||||
|
|
||||||
memset (dev, 0, sizeof (GraphicDevice));
|
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_CORALP)
|
|
||||||
if (card_init () == 0)
|
|
||||||
return NULL;
|
|
||||||
#else
|
|
||||||
/*
|
|
||||||
* Preliminary init of the onboard graphic controller,
|
|
||||||
* retrieve base address
|
|
||||||
*/
|
|
||||||
if ((dev->frameAdrs = board_video_init ()) == 0) {
|
|
||||||
puts ("Controller not found!\n");
|
|
||||||
return NULL;
|
|
||||||
} else {
|
|
||||||
puts ("Lime\n");
|
|
||||||
|
|
||||||
/* Set Change of Clock Frequency Register */
|
|
||||||
HOST_WR_REG (GC_CCF, CONFIG_SYS_MB862xx_CCF);
|
|
||||||
/* Delay required */
|
|
||||||
udelay(300);
|
|
||||||
/* Set Memory I/F Mode Register) */
|
|
||||||
HOST_WR_REG (GC_MMR, CONFIG_SYS_MB862xx_MMR);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
de_init ();
|
|
||||||
|
|
||||||
#if !defined(CONFIG_VIDEO_CORALP)
|
|
||||||
board_disp_init ();
|
|
||||||
#endif
|
|
||||||
|
|
||||||
#if (defined(CONFIG_LWMON5) || \
|
|
||||||
defined(CONFIG_SOCRATES)) && !(CONFIG_POST & CONFIG_SYS_POST_SYSMON)
|
|
||||||
/* Lamp on */
|
|
||||||
board_backlight_switch (1);
|
|
||||||
#endif
|
|
||||||
|
|
||||||
return dev;
|
|
||||||
}
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Set a RGB color in the LUT
|
|
||||||
*/
|
|
||||||
void video_set_lut (unsigned int index, unsigned char r,
|
|
||||||
unsigned char g, unsigned char b)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
|
|
||||||
L0PAL_WR_REG (index, (r << 16) | (g << 8) | (b));
|
|
||||||
}
|
|
||||||
|
|
||||||
#if defined(CONFIG_VIDEO_MB862xx_ACCEL)
|
|
||||||
/*
|
|
||||||
* Drawing engine Fill and BitBlt screen region
|
|
||||||
*/
|
|
||||||
void video_hw_rectfill (unsigned int bpp, unsigned int dst_x,
|
|
||||||
unsigned int dst_y, unsigned int dim_x,
|
|
||||||
unsigned int dim_y, unsigned int color)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
|
|
||||||
de_wait_slots (3);
|
|
||||||
DE_WR_REG (GC_FC, color);
|
|
||||||
DE_WR_FIFO (0x09410000);
|
|
||||||
DE_WR_FIFO ((dst_y << 16) | dst_x);
|
|
||||||
DE_WR_FIFO ((dim_y << 16) | dim_x);
|
|
||||||
de_wait ();
|
|
||||||
}
|
|
||||||
|
|
||||||
void video_hw_bitblt (unsigned int bpp, unsigned int src_x,
|
|
||||||
unsigned int src_y, unsigned int dst_x,
|
|
||||||
unsigned int dst_y, unsigned int width,
|
|
||||||
unsigned int height)
|
|
||||||
{
|
|
||||||
GraphicDevice *dev = &mb862xx;
|
|
||||||
unsigned int ctrl = 0x0d000000L;
|
|
||||||
|
|
||||||
if (src_x >= dst_x && src_y >= dst_y)
|
|
||||||
ctrl |= 0x00440000L;
|
|
||||||
else if (src_x >= dst_x && src_y <= dst_y)
|
|
||||||
ctrl |= 0x00460000L;
|
|
||||||
else if (src_x <= dst_x && src_y >= dst_y)
|
|
||||||
ctrl |= 0x00450000L;
|
|
||||||
else
|
|
||||||
ctrl |= 0x00470000L;
|
|
||||||
|
|
||||||
de_wait_slots (4);
|
|
||||||
DE_WR_FIFO (ctrl);
|
|
||||||
DE_WR_FIFO ((src_y << 16) | src_x);
|
|
||||||
DE_WR_FIFO ((dst_y << 16) | dst_x);
|
|
||||||
DE_WR_FIFO ((height << 16) | width);
|
|
||||||
de_wait (); /* sync */
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
@ -15,7 +15,7 @@
|
||||||
#include <malloc.h>
|
#include <malloc.h>
|
||||||
#include <linux/compat.h>
|
#include <linux/compat.h>
|
||||||
#include <linux/err.h>
|
#include <linux/err.h>
|
||||||
#include <video.h> /* For struct video_uc_platdata */
|
#include <video.h> /* For struct video_uc_plat */
|
||||||
#include <video_fb.h>
|
#include <video_fb.h>
|
||||||
#include <lcd.h>
|
#include <lcd.h>
|
||||||
#include <asm/global_data.h>
|
#include <asm/global_data.h>
|
||||||
|
|
|
||||||
|
|
@ -108,6 +108,8 @@ static const struct udevice_id simple_panel_ids[] = {
|
||||||
{ .compatible = "auo,b133htn01" },
|
{ .compatible = "auo,b133htn01" },
|
||||||
{ .compatible = "boe,nv140fhmn49" },
|
{ .compatible = "boe,nv140fhmn49" },
|
||||||
{ .compatible = "lg,lb070wv8" },
|
{ .compatible = "lg,lb070wv8" },
|
||||||
|
{ .compatible = "sharp,lq123p1jx31" },
|
||||||
|
{ .compatible = "boe,nv101wxmn51" },
|
||||||
{ }
|
{ }
|
||||||
};
|
};
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,101 +0,0 @@
|
||||||
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
||||||
/*
|
|
||||||
* (C) Copyright 2007
|
|
||||||
* DENX Software Engineering, Anatolij Gustschin, agust@denx.de
|
|
||||||
*/
|
|
||||||
|
|
||||||
/*
|
|
||||||
* mb862xx.h - Graphic interface for Fujitsu CoralP/Lime
|
|
||||||
*/
|
|
||||||
|
|
||||||
#ifndef _MB862XX_H_
|
|
||||||
#define _MB862XX_H_
|
|
||||||
|
|
||||||
#define PCI_VENDOR_ID_FUJITSU 0x10CF
|
|
||||||
#define PCI_DEVICE_ID_CORAL_P 0x2019
|
|
||||||
#define PCI_DEVICE_ID_CORAL_PA 0x201E
|
|
||||||
|
|
||||||
#define MB862XX_TYPE_LIME 0x1
|
|
||||||
|
|
||||||
#define GC_HOST_BASE 0x01fc0000
|
|
||||||
#define GC_DISP_BASE 0x01fd0000
|
|
||||||
#define GC_DRAW_BASE 0x01ff0000
|
|
||||||
|
|
||||||
/* Host interface registers */
|
|
||||||
#define GC_SRST 0x0000002c
|
|
||||||
#define GC_CCF 0x00000038
|
|
||||||
#define GC_CID 0x000000f0
|
|
||||||
#define GC_MMR 0x0000fffc
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Display Controller registers
|
|
||||||
* _A means the offset is aligned, we use these for boards
|
|
||||||
* with 8-/16-bit GDC access not working or buggy.
|
|
||||||
*/
|
|
||||||
#define GC_DCM0 0x00000000
|
|
||||||
#define GC_HTP_A 0x00000004
|
|
||||||
#define GC_HTP 0x00000006
|
|
||||||
#define GC_HDB_HDP_A 0x00000008
|
|
||||||
#define GC_HDP 0x00000008
|
|
||||||
#define GC_HDB 0x0000000a
|
|
||||||
#define GC_VSW_HSW_HSP_A 0x0000000c
|
|
||||||
#define GC_HSP 0x0000000c
|
|
||||||
#define GC_HSW 0x0000000e
|
|
||||||
#define GC_VSW 0x0000000f
|
|
||||||
#define GC_VTR_A 0x00000010
|
|
||||||
#define GC_VTR 0x00000012
|
|
||||||
#define GC_VDP_VSP_A 0x00000014
|
|
||||||
#define GC_VSP 0x00000014
|
|
||||||
#define GC_VDP 0x00000016
|
|
||||||
#define GC_WY_WX 0x00000018
|
|
||||||
#define GC_WH_WW 0x0000001c
|
|
||||||
#define GC_L0M 0x00000020
|
|
||||||
#define GC_L0OA0 0x00000024
|
|
||||||
#define GC_L0DA0 0x00000028
|
|
||||||
#define GC_L0DY_L0DX 0x0000002c
|
|
||||||
#define GC_L2M 0x00000040
|
|
||||||
#define GC_L2OA0 0x00000044
|
|
||||||
#define GC_L2DA0 0x00000048
|
|
||||||
#define GC_L2OA1 0x0000004c
|
|
||||||
#define GC_L2DA1 0x00000050
|
|
||||||
#define GC_L2DX 0x00000054
|
|
||||||
#define GC_L2DY 0x00000056
|
|
||||||
#define GC_DCM1 0x00000100
|
|
||||||
#define GC_DCM2 0x00000104
|
|
||||||
#define GC_DCM3 0x00000108
|
|
||||||
#define GC_L0EM 0x00000110
|
|
||||||
#define GC_L0WY_L0WX 0x00000114
|
|
||||||
#define GC_L0WH_L0WW 0x00000118
|
|
||||||
#define GC_L2EM 0x00000130
|
|
||||||
#define GC_L2WX 0x00000134
|
|
||||||
#define GC_L2WY 0x00000136
|
|
||||||
#define GC_L2WW 0x00000138
|
|
||||||
#define GC_L2WH 0x0000013a
|
|
||||||
#define GC_L0PAL0 0x00000400
|
|
||||||
|
|
||||||
/* Drawing registers */
|
|
||||||
#define GC_CTR 0x00000400
|
|
||||||
#define GC_IFCNT 0x00000408
|
|
||||||
#define GC_FBR 0x00000440
|
|
||||||
#define GC_XRES 0x00000444
|
|
||||||
#define GC_CXMIN 0x00000454
|
|
||||||
#define GC_CXMAX 0x00000458
|
|
||||||
#define GC_CYMIN 0x0000045c
|
|
||||||
#define GC_CYMAX 0x00000460
|
|
||||||
#define GC_FC 0x00000480
|
|
||||||
#define GC_BC 0x00000484
|
|
||||||
#define GC_FIFO 0x000004a0
|
|
||||||
#define GC_REV 0x00008084
|
|
||||||
#define GC_GEO_FIFO 0x00008400
|
|
||||||
|
|
||||||
typedef struct {
|
|
||||||
unsigned int index;
|
|
||||||
unsigned int value;
|
|
||||||
} gdc_regs;
|
|
||||||
|
|
||||||
int mb862xx_probe(unsigned int addr);
|
|
||||||
const gdc_regs *board_get_regs (void);
|
|
||||||
unsigned int board_video_init (void);
|
|
||||||
void board_backlight_switch(int);
|
|
||||||
|
|
||||||
#endif /* _MB862XX_H_ */
|
|
||||||
|
|
@ -4004,8 +4004,6 @@ CONFIG_VIDEO_DA8XX
|
||||||
CONFIG_VIDEO_FONT_4X6
|
CONFIG_VIDEO_FONT_4X6
|
||||||
CONFIG_VIDEO_LCD_I2C_BUS
|
CONFIG_VIDEO_LCD_I2C_BUS
|
||||||
CONFIG_VIDEO_LOGO
|
CONFIG_VIDEO_LOGO
|
||||||
CONFIG_VIDEO_MB862xx
|
|
||||||
CONFIG_VIDEO_MB862xx_ACCEL
|
|
||||||
CONFIG_VIDEO_MXS
|
CONFIG_VIDEO_MXS
|
||||||
CONFIG_VIDEO_MXS_MODE_SYSTEM
|
CONFIG_VIDEO_MXS_MODE_SYSTEM
|
||||||
CONFIG_VIDEO_STD_TIMINGS
|
CONFIG_VIDEO_STD_TIMINGS
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue