board: toradex: add apalis-imx8x 2gb wb it v1.1a module support
This commit adds initial support for the Toradex Apalis iMX8X 2GB WB IT V1.1A System on Module support [1]. Boot log: U-Boot 2020.10-02940-g894aebb7e8-dirty (Oct 22 2020 - 09:43:57 +0300) CPU: NXP i.MX8QXP RevB A35 at 1200 MHz at 30C DRAM: 2 GiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 Loading Environment from MMC... OK In: serial@5a070000 Out: serial@5a070000 Err: serial@5a070000 Model: Toradex Apalis iMX8 QuadXPlus 2GB Wi-Fi / BT IT V1.1A, Serial# 06617018 Net: eth0: ethernet@5b040000 [PRIME] Hit any key to stop autoboot: 0 Functionality wise the following is known to be working: - eMMC and MMC/SD card - Ethernet (*) - GPIOs - I2C Unfortunately, there is no USB functionality for the i.MX 8QXP as of yet. * With the SCU FW from the latest Toradex BSP 5.0.0 (SCU FW 1.5.1) ETH PHY encounters bring up problems after reset, this will be fixed soon on SCU FW side. [1] https://www.toradex.com/computer-on-modules/apalis-arm-family/nxp-imx-8x Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Acked-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
This commit is contained in:
Igor Opaniuk
Stefano Babic
parent
3d1103cefc
commit
a51fdba3fa
|
|
@ -65,6 +65,11 @@ config TARGET_COLIBRI_IMX8X
|
||||||
select BOARD_LATE_INIT
|
select BOARD_LATE_INIT
|
||||||
select IMX8QXP
|
select IMX8QXP
|
||||||
|
|
||||||
|
config TARGET_APALIS_IMX8X
|
||||||
|
bool "Support Apalis iMX8X module"
|
||||||
|
select BOARD_LATE_INIT
|
||||||
|
select IMX8QXP
|
||||||
|
|
||||||
config TARGET_DENEB
|
config TARGET_DENEB
|
||||||
bool "Support i.MX8QXP Capricorn Deneb board"
|
bool "Support i.MX8QXP Capricorn Deneb board"
|
||||||
select BOARD_LATE_INIT
|
select BOARD_LATE_INIT
|
||||||
|
|
@ -98,6 +103,7 @@ source "board/freescale/imx8qxp_mek/Kconfig"
|
||||||
source "board/advantech/imx8qm_rom7720_a1/Kconfig"
|
source "board/advantech/imx8qm_rom7720_a1/Kconfig"
|
||||||
source "board/toradex/apalis-imx8/Kconfig"
|
source "board/toradex/apalis-imx8/Kconfig"
|
||||||
source "board/toradex/colibri-imx8x/Kconfig"
|
source "board/toradex/colibri-imx8x/Kconfig"
|
||||||
|
source "board/toradex/apalis-imx8x/Kconfig"
|
||||||
source "board/siemens/capricorn/Kconfig"
|
source "board/siemens/capricorn/Kconfig"
|
||||||
|
|
||||||
config IMX_SNVS_SEC_SC
|
config IMX_SNVS_SEC_SC
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,30 @@
|
||||||
|
if TARGET_APALIS_IMX8X
|
||||||
|
|
||||||
|
config SYS_BOARD
|
||||||
|
default "apalis-imx8x"
|
||||||
|
|
||||||
|
config SYS_VENDOR
|
||||||
|
default "toradex"
|
||||||
|
|
||||||
|
config SYS_CONFIG_NAME
|
||||||
|
default "apalis-imx8x"
|
||||||
|
|
||||||
|
config TDX_CFG_BLOCK
|
||||||
|
default y
|
||||||
|
|
||||||
|
config TDX_HAVE_MMC
|
||||||
|
default y
|
||||||
|
|
||||||
|
config TDX_CFG_BLOCK_DEV
|
||||||
|
default "0"
|
||||||
|
|
||||||
|
config TDX_CFG_BLOCK_PART
|
||||||
|
default "1"
|
||||||
|
|
||||||
|
# Toradex config block in eMMC, at the end of 1st "boot sector"
|
||||||
|
config TDX_CFG_BLOCK_OFFSET
|
||||||
|
default "-512"
|
||||||
|
|
||||||
|
source "board/toradex/common/Kconfig"
|
||||||
|
|
||||||
|
endif
|
||||||
|
|
@ -0,0 +1,10 @@
|
||||||
|
Apalis iMX8X
|
||||||
|
M: Igor Opaniuk <igor.opaniuk@toradex.com>
|
||||||
|
W: http://developer.toradex.com/software/linux/linux-software
|
||||||
|
S: Maintained
|
||||||
|
F: arch/arm/dts/fsl-imx8x-apalis.dts
|
||||||
|
F: arch/arm/dts/fsl-imx8x-apalis-u-boot.dtsi
|
||||||
|
F: board/toradex/apalis-imx8x/
|
||||||
|
F: configs/apalis-imx8x_defconfig
|
||||||
|
F: doc/board/toradex/apalis-imx8x.rst
|
||||||
|
F: include/configs/apalis-imx8x.h
|
||||||
|
|
@ -0,0 +1,6 @@
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
# Copyright 2020 Toradex
|
||||||
|
#
|
||||||
|
|
||||||
|
obj-y += apalis-imx8x.o
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||||
|
/*
|
||||||
|
* Copyright 2020 Toradex
|
||||||
|
*
|
||||||
|
* Refer doc/imx/mkimage/imx8image.txt for more details about how-to configure
|
||||||
|
* and create imx8image boot image
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define __ASSEMBLY__
|
||||||
|
|
||||||
|
/* Boot from SD, sector size 0x400 */
|
||||||
|
BOOT_FROM EMMC_FASTBOOT 0x400
|
||||||
|
/* SoC type IMX8QX */
|
||||||
|
SOC_TYPE IMX8QX
|
||||||
|
/* Append seco container image */
|
||||||
|
APPEND mx8qx-ahab-container.img
|
||||||
|
/* Create the 2nd container */
|
||||||
|
CONTAINER
|
||||||
|
/* Add scfw image with exec attribute */
|
||||||
|
IMAGE SCU mx8qx-apalis-scfw-tcm.bin
|
||||||
|
/* Add ATF image with exec attribute */
|
||||||
|
IMAGE A35 bl31.bin 0x80000000
|
||||||
|
/* Add U-Boot image with load attribute */
|
||||||
|
DATA A35 u-boot-dtb.bin 0x80020000
|
||||||
|
|
@ -0,0 +1,131 @@
|
||||||
|
// SPDX-License-Identifier: GPL-2.0+
|
||||||
|
/*
|
||||||
|
* Copyright 2020 Toradex
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <common.h>
|
||||||
|
#include <cpu_func.h>
|
||||||
|
#include <init.h>
|
||||||
|
|
||||||
|
#include <asm/arch/clock.h>
|
||||||
|
#include <asm/arch/imx8-pins.h>
|
||||||
|
#include <asm/arch/iomux.h>
|
||||||
|
#include <asm/arch/sci/sci.h>
|
||||||
|
#include <asm/arch/sys_proto.h>
|
||||||
|
#include <asm/gpio.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <env.h>
|
||||||
|
#include <errno.h>
|
||||||
|
#include <linux/libfdt.h>
|
||||||
|
|
||||||
|
#include "../common/tdx-cfg-block.h"
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
#define UART_PAD_CTRL ((SC_PAD_CONFIG_OUT_IN << PADRING_CONFIG_SHIFT) | \
|
||||||
|
(SC_PAD_ISO_OFF << PADRING_LPCONFIG_SHIFT) | \
|
||||||
|
(SC_PAD_28FDSOI_DSE_DV_HIGH << PADRING_DSE_SHIFT) | \
|
||||||
|
(SC_PAD_28FDSOI_PS_PU << PADRING_PULL_SHIFT))
|
||||||
|
|
||||||
|
static iomux_cfg_t uart1_pads[] = {
|
||||||
|
SC_P_UART1_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
SC_P_UART1_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void setup_iomux_uart(void)
|
||||||
|
{
|
||||||
|
imx8_iomux_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_early_init_f(void)
|
||||||
|
{
|
||||||
|
sc_pm_clock_rate_t rate;
|
||||||
|
sc_err_t err = 0;
|
||||||
|
|
||||||
|
/*
|
||||||
|
* This works around that having only UART3 up the baudrate is 1.2M
|
||||||
|
* instead of 115.2k. Set UART0 clock root to 80 MHz
|
||||||
|
*/
|
||||||
|
rate = 80000000;
|
||||||
|
err = sc_pm_set_clock_rate(-1, SC_R_UART_0, SC_PM_CLK_PER, &rate);
|
||||||
|
if (err != SC_ERR_NONE)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
/* Set UART3 clock root to 80 MHz and enable it */
|
||||||
|
rate = SC_80MHZ;
|
||||||
|
err = sc_pm_setup_uart(SC_R_UART_1, rate);
|
||||||
|
if (err != SC_ERR_NONE)
|
||||||
|
return 0;
|
||||||
|
|
||||||
|
setup_iomux_uart();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#if IS_ENABLED(CONFIG_DM_GPIO)
|
||||||
|
static void board_gpio_init(void)
|
||||||
|
{
|
||||||
|
/* TODO */
|
||||||
|
}
|
||||||
|
#else
|
||||||
|
static inline void board_gpio_init(void) {}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#if IS_ENABLED(CONFIG_FEC_MXC)
|
||||||
|
#include <miiphy.h>
|
||||||
|
|
||||||
|
int board_phy_config(struct phy_device *phydev)
|
||||||
|
{
|
||||||
|
if (phydev->drv->config)
|
||||||
|
phydev->drv->config(phydev);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int checkboard(void)
|
||||||
|
{
|
||||||
|
puts("Model: Toradex Apalis iMX8X\n");
|
||||||
|
|
||||||
|
build_info();
|
||||||
|
print_bootinfo();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
board_gpio_init();
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Board specific reset that is system reset.
|
||||||
|
*/
|
||||||
|
void reset_cpu(ulong addr)
|
||||||
|
{
|
||||||
|
/* TODO */
|
||||||
|
}
|
||||||
|
|
||||||
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
||||||
|
int ft_board_setup(void *blob, struct bd_info *bd)
|
||||||
|
{
|
||||||
|
return ft_common_board_setup(blob, bd);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int board_mmc_get_env_dev(int devno)
|
||||||
|
{
|
||||||
|
return devno;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_late_init(void)
|
||||||
|
{
|
||||||
|
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||||
|
/* TODO move to common */
|
||||||
|
env_set("board_name", "Apalis iMX8X");
|
||||||
|
#endif
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,77 @@
|
||||||
|
CONFIG_ARM=y
|
||||||
|
CONFIG_ARCH_IMX8=y
|
||||||
|
CONFIG_SYS_TEXT_BASE=0x80020000
|
||||||
|
CONFIG_SYS_MALLOC_F_LEN=0x4000
|
||||||
|
CONFIG_NR_DRAM_BANKS=3
|
||||||
|
CONFIG_ENV_SIZE=0x2000
|
||||||
|
CONFIG_ENV_OFFSET=0xFFFFDE00
|
||||||
|
CONFIG_DM_GPIO=y
|
||||||
|
CONFIG_TARGET_APALIS_IMX8X=y
|
||||||
|
CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-apalis"
|
||||||
|
CONFIG_DISTRO_DEFAULTS=y
|
||||||
|
CONFIG_FIT=y
|
||||||
|
CONFIG_OF_SYSTEM_SETUP=y
|
||||||
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"
|
||||||
|
CONFIG_BOOTDELAY=1
|
||||||
|
CONFIG_LOG=y
|
||||||
|
# CONFIG_DISPLAY_BOARDINFO is not set
|
||||||
|
CONFIG_BOARD_EARLY_INIT_F=y
|
||||||
|
CONFIG_SYS_PROMPT="Apalis iMX8X # "
|
||||||
|
CONFIG_CMD_CPU=y
|
||||||
|
# CONFIG_BOOTM_NETBSD is not set
|
||||||
|
CONFIG_CMD_ASKENV=y
|
||||||
|
CONFIG_CMD_MEMTEST=y
|
||||||
|
CONFIG_SYS_MEMTEST_START=0x88000000
|
||||||
|
CONFIG_SYS_MEMTEST_END=0x89000000
|
||||||
|
CONFIG_CMD_CLK=y
|
||||||
|
CONFIG_CMD_DM=y
|
||||||
|
CONFIG_CMD_GPIO=y
|
||||||
|
CONFIG_CMD_I2C=y
|
||||||
|
CONFIG_CMD_MMC=y
|
||||||
|
CONFIG_CMD_PCI=y
|
||||||
|
CONFIG_CMD_CACHE=y
|
||||||
|
CONFIG_CMD_UUID=y
|
||||||
|
CONFIG_CMD_EXT4_WRITE=y
|
||||||
|
CONFIG_ENV_OVERWRITE=y
|
||||||
|
CONFIG_ENV_IS_IN_MMC=y
|
||||||
|
CONFIG_SYS_RELOC_GD_ENV_ADDR=y
|
||||||
|
CONFIG_SYS_MMC_ENV_PART=1
|
||||||
|
CONFIG_VERSION_VARIABLE=y
|
||||||
|
CONFIG_NET_RANDOM_ETHADDR=y
|
||||||
|
CONFIG_IP_DEFRAG=y
|
||||||
|
CONFIG_TFTP_BLOCKSIZE=4096
|
||||||
|
CONFIG_BOOTCOUNT_LIMIT=y
|
||||||
|
CONFIG_BOOTCOUNT_ENV=y
|
||||||
|
CONFIG_CLK_IMX8=y
|
||||||
|
CONFIG_CPU=y
|
||||||
|
CONFIG_MXC_GPIO=y
|
||||||
|
CONFIG_DM_I2C=y
|
||||||
|
CONFIG_SYS_I2C_IMX_LPI2C=y
|
||||||
|
CONFIG_I2C_MUX=y
|
||||||
|
CONFIG_I2C_MUX_PCA954x=y
|
||||||
|
CONFIG_MISC=y
|
||||||
|
CONFIG_DM_MMC=y
|
||||||
|
CONFIG_FSL_USDHC=y
|
||||||
|
CONFIG_PHYLIB=y
|
||||||
|
CONFIG_PHY_ADDR_ENABLE=y
|
||||||
|
CONFIG_PHY_MICREL=y
|
||||||
|
CONFIG_PHY_MICREL_KSZ90X1=y
|
||||||
|
CONFIG_DM_ETH=y
|
||||||
|
CONFIG_FEC_MXC_SHARE_MDIO=y
|
||||||
|
CONFIG_FEC_MXC_MDIO_BASE=0x5B040000
|
||||||
|
CONFIG_FEC_MXC=y
|
||||||
|
CONFIG_MII=y
|
||||||
|
CONFIG_PCI=y
|
||||||
|
CONFIG_DM_PCI=y
|
||||||
|
CONFIG_PINCTRL=y
|
||||||
|
CONFIG_PINCTRL_IMX8=y
|
||||||
|
CONFIG_POWER_DOMAIN=y
|
||||||
|
CONFIG_IMX8_POWER_DOMAIN=y
|
||||||
|
CONFIG_DM_REGULATOR=y
|
||||||
|
CONFIG_DM_REGULATOR_FIXED=y
|
||||||
|
CONFIG_DM_REGULATOR_GPIO=y
|
||||||
|
CONFIG_DM_SERIAL=y
|
||||||
|
CONFIG_FSL_LPUART=y
|
||||||
|
CONFIG_DM_THERMAL=y
|
||||||
|
CONFIG_IMX_SCU_THERMAL=y
|
||||||
|
# CONFIG_EFI_LOADER is not set
|
||||||
|
|
@ -0,0 +1,149 @@
|
||||||
|
/* SPDX-License-Identifier: GPL-2.0+ */
|
||||||
|
/*
|
||||||
|
* Copyright 2020 Toradex
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __APALIS_IMX8X_H
|
||||||
|
#define __APALIS_IMX8X_H
|
||||||
|
|
||||||
|
#include <asm/arch/imx-regs.h>
|
||||||
|
#include <linux/sizes.h>
|
||||||
|
#include <linux/stringify.h>
|
||||||
|
|
||||||
|
#define CONFIG_REMAKE_ELF
|
||||||
|
|
||||||
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||||
|
#define USDHC1_BASE_ADDR 0x5b010000
|
||||||
|
#define USDHC2_BASE_ADDR 0x5b020000
|
||||||
|
#define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */
|
||||||
|
|
||||||
|
#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
|
||||||
|
|
||||||
|
#define CONFIG_TFTP_TSIZE
|
||||||
|
|
||||||
|
#define CONFIG_IPADDR 192.168.10.2
|
||||||
|
#define CONFIG_NETMASK 255.255.255.0
|
||||||
|
#define CONFIG_SERVERIP 192.168.10.1
|
||||||
|
|
||||||
|
#define FEC_ENET_ENABLE_TXC_DELAY
|
||||||
|
#define FEC_ENET_ENABLE_RXC_DELAY
|
||||||
|
|
||||||
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
||||||
|
"kernel_addr_r=0x80280000\0" \
|
||||||
|
"fdt_addr_r=0x83100000\0" \
|
||||||
|
"ramdisk_addr_r=0x8a000000\0" \
|
||||||
|
"scriptaddr=0x83200000\0"
|
||||||
|
|
||||||
|
#ifdef CONFIG_AHAB_BOOT
|
||||||
|
#define AHAB_ENV "sec_boot=yes\0"
|
||||||
|
#else
|
||||||
|
#define AHAB_ENV "sec_boot=no\0"
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Boot M4 */
|
||||||
|
#define M4_BOOT_ENV \
|
||||||
|
"m4_0_image=m4_0.bin\0" \
|
||||||
|
"loadm4image_0=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} " \
|
||||||
|
"${m4_0_image}\0" \
|
||||||
|
"m4boot_0=run loadm4image_0; dcache flush; bootaux ${loadaddr} 0\0" \
|
||||||
|
|
||||||
|
#define MFG_NAND_PARTITION ""
|
||||||
|
|
||||||
|
#define BOOT_TARGET_DEVICES(func) \
|
||||||
|
func(MMC, mmc, 1) \
|
||||||
|
func(MMC, mmc, 0) \
|
||||||
|
func(DHCP, dhcp, na)
|
||||||
|
#include <config_distro_bootcmd.h>
|
||||||
|
#undef BOOTENV_RUN_NET_USB_START
|
||||||
|
#define BOOTENV_RUN_NET_USB_START ""
|
||||||
|
|
||||||
|
#define CONFIG_MFG_ENV_SETTINGS \
|
||||||
|
"mfgtool_args=setenv bootargs ${consoleargs} " \
|
||||||
|
"rdinit=/linuxrc g_mass_storage.stall=0 " \
|
||||||
|
"g_mass_storage.removable=1 g_mass_storage.idVendor=0x066F " \
|
||||||
|
"g_mass_storage.idProduct=0x37FF " \
|
||||||
|
"g_mass_storage.iSerialNumber=\"\" " MFG_NAND_PARTITION \
|
||||||
|
"${vidargs} clk_ignore_unused\0" \
|
||||||
|
"initrd_addr=0x83800000\0" \
|
||||||
|
"bootcmd_mfg=run mfgtool_args;booti ${loadaddr} ${initrd_addr} " \
|
||||||
|
"${fdt_addr};\0" \
|
||||||
|
|
||||||
|
/* Initial environment variables */
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
AHAB_ENV \
|
||||||
|
BOOTENV \
|
||||||
|
CONFIG_MFG_ENV_SETTINGS \
|
||||||
|
M4_BOOT_ENV \
|
||||||
|
MEM_LAYOUT_ENV_SETTINGS \
|
||||||
|
"boot_file=Image\0" \
|
||||||
|
"consoleargs=console=ttyLP3,${baudrate} earlycon\0" \
|
||||||
|
"fdt_file=imx8qxp-apalis-eval.dtb\0" \
|
||||||
|
"fdtfile=imx8qxp-apalis-eval.dtb\0" \
|
||||||
|
"finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
|
||||||
|
"image=Image\0" \
|
||||||
|
"initrd_addr=0x83800000\0" \
|
||||||
|
"mmcargs=setenv bootargs ${consoleargs} " \
|
||||||
|
"root=PARTUUID=${uuid} rootwait " \
|
||||||
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
||||||
|
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
||||||
|
"netargs=setenv bootargs ${consoleargs} " \
|
||||||
|
"root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp " \
|
||||||
|
"${vidargs}\0" \
|
||||||
|
"nfsboot=run netargs; dhcp ${loadaddr} ${image}; tftp ${fdt_addr} " \
|
||||||
|
"apalis-imx8x/${fdt_file}; booti ${loadaddr} - " \
|
||||||
|
"${fdt_addr}\0" \
|
||||||
|
"panel=NULL\0" \
|
||||||
|
"script=boot.scr\0" \
|
||||||
|
"update_uboot=askenv confirm Did you load u-boot-dtb.imx (y/N)?; " \
|
||||||
|
"if test \"$confirm\" = \"y\"; then " \
|
||||||
|
"setexpr blkcnt ${filesize} + 0x1ff && setexpr blkcnt " \
|
||||||
|
"${blkcnt} / 0x200; mmc dev 0 1; mmc write ${loadaddr} 0x0 " \
|
||||||
|
"${blkcnt}; fi\0" \
|
||||||
|
"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
|
||||||
|
|
||||||
|
/* Link Definitions */
|
||||||
|
#define CONFIG_LOADADDR 0x89000000
|
||||||
|
|
||||||
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||||
|
|
||||||
|
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
|
||||||
|
|
||||||
|
/* Environment in eMMC, before config block at the end of 1st "boot sector" */
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
||||||
|
|
||||||
|
/* On Apalis iMX8X USDHC1 is eMMC, USDHC2 is 4-bit SD */
|
||||||
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||||
|
|
||||||
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M /* Increase max gunzip size */
|
||||||
|
|
||||||
|
/* Size of malloc() pool */
|
||||||
|
#define CONFIG_SYS_MALLOC_LEN ((CONFIG_ENV_SIZE + (32 * 1024)) * 1024)
|
||||||
|
|
||||||
|
#define CONFIG_SYS_SDRAM_BASE 0x80000000
|
||||||
|
#define PHYS_SDRAM_1 0x80000000
|
||||||
|
#define PHYS_SDRAM_2 0x880000000
|
||||||
|
#define PHYS_SDRAM_1_SIZE SZ_2G /* 2 GB */
|
||||||
|
#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 GB */
|
||||||
|
|
||||||
|
/* Monitor Command Prompt */
|
||||||
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||||
|
#define CONFIG_SYS_CBSIZE SZ_2K
|
||||||
|
#define CONFIG_SYS_MAXARGS 64
|
||||||
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||||
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
||||||
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||||
|
|
||||||
|
/* Generic Timer Definitions */
|
||||||
|
#define COUNTER_FREQUENCY 8000000 /* 8MHz */
|
||||||
|
|
||||||
|
/* Networking */
|
||||||
|
#define CONFIG_FEC_ENET_DEV 0
|
||||||
|
#define IMX_FEC_BASE 0x5b040000
|
||||||
|
#define CONFIG_FEC_MXC_PHYADDR 0x4
|
||||||
|
#define CONFIG_ETHPRIME "eth0"
|
||||||
|
#define CONFIG_FEC_XCV_TYPE RGMII
|
||||||
|
#define FEC_QUIRK_ENET_MAC
|
||||||
|
#define PHY_ANEG_TIMEOUT 20000
|
||||||
|
|
||||||
|
#endif /* __APALIS_IMX8X_H */
|
||||||
Loading…
Reference in New Issue