LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm: ti: boot: Use correct dtb and dtbo on Android boot 

Read correct dtb blob from boot.img/recovery.img and apply correct dtbo
blobs from dtbo partition.

Signed-off-by: Sam Protsenko <joe.skb7@gmail.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
This commit is contained in:
Sam Protsenko 2020-01-24 17:53:49 +02:00 committed by Lokesh Vutla
parent d94e6dbcf6
commit add1a6bc9b
2 changed files with 47 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
include/configs/ti_armv7_common.h
View File

@ -37,11 +37,18 @@
* seen large trees). We say all of this must be within the first 256MB
* as that will normally be within the kernel lowmem and thus visible via
* bootm_size and we only run on platforms with 256MB or more of memory.
*
* As a temporary storage for DTBO blobs (which should be applied into DTB
* blob), we use the location 15.5 MB above the ramdisk. If someone wants to
* use ramdisk bigger than 15.5 MB, then DTBO can be loaded and applied to DTB
* blob before loading the ramdisk, as DTBO location is only used as a temporary
* storage, and can be re-used after 'fdt apply' command is done.
*/
#define DEFAULT_LINUX_BOOT_ENV \
"loadaddr=0x82000000\0" \
"kernel_addr_r=0x82000000\0" \
"fdtaddr=0x88000000\0" \
"dtboaddr=0x89000000\0" \
"fdt_addr_r=0x88000000\0" \
"rdaddr=0x88080000\0" \
"ramdisk_addr_r=0x88080000\0" \

43
include/environment/ti/boot.h
View File

@ -81,6 +81,45 @@
#define AB_SELECT_ARGS ""
#endif
/*
* Prepares complete device tree blob for current board (for Android boot).
*
* Boot image or recovery image should be loaded into $loadaddr prior to running
* these commands. The logic of these commnads is next:
*
* 1. Read correct DTB for current SoC/board from boot image in $loadaddr
* to $fdtaddr
* 2. Merge all needed DTBO for current board from 'dtbo' partition into read
* DTB
* 3. User should provide $fdtaddr as 3rd argument to 'bootm'
*/
#define PREPARE_FDT \
"echo Preparing FDT...; " \
"if test $board_name = am57xx_evm_reva3; then " \
"echo \" Reading DTBO partition...\"; " \
"part start mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_start; " \
"part size mmc ${mmcdev} dtbo${slot_suffix} p_dtbo_size; " \
"mmc read ${dtboaddr} ${p_dtbo_start} ${p_dtbo_size}; " \
"echo \" Reading DTB for AM57x EVM RevA3...\"; " \
"abootimg get dtb --index=0 dtb_start dtb_size; " \
"cp.b $dtb_start $fdtaddr $dtb_size; " \
"fdt addr $fdtaddr; " \
"echo \" Applying DTBOs for AM57x EVM RevA3...\"; " \
"adtimg addr $dtboaddr; " \
"adtimg get dt --index=0 dtbo0_addr; " \
"fdt apply $dtbo0_addr; " \
"adtimg get dt --index=1 dtbo1_addr; " \
"fdt apply $dtbo1_addr; " \
"elif test $board_name = beagle_x15_revc; then " \
"echo \" Reading DTB for Beagle X15 RevC...\"; " \
"abootimg get dtb --index=0 dtb_start dtb_size; " \
"cp.b $dtb_start $fdtaddr $dtb_size; " \
"fdt addr $fdtaddr; " \
"else " \
"echo Error: Android boot is not supported for $board_name; " \
"exit; " \
"fi; " \
#define FASTBOOT_CMD \
"echo Booting into fastboot ...; " \
"fastboot " __stringify(CONFIG_FASTBOOT_USB_DEV) "; "
@ -137,9 +176,7 @@
"if part start mmc $mmcdev $apart boot_start; then " \
"part size mmc $mmcdev $apart boot_size; " \
"mmc read $loadaddr $boot_start $boot_size; " \
"abootimg get dtb --index=0 dtb_start dtb_size; " \
"cp.b $dtb_start $fdtaddr $dtb_size; " \
"fdt addr $fdtaddr; " \
PREPARE_FDT \
"bootm $loadaddr $ardaddr $fdtaddr; " \
"else " \
"echo $apart partition not found; " \