ARM: dts: add support for Radxa Zero
Import the initial dts queued for Linux 5.16.y Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
This commit is contained in:
Christian Hewitt
Neil Armstrong
parent
8ee224bfe4
commit
b1463cbb54
|
|
@ -175,6 +175,7 @@ dtb-$(CONFIG_ARCH_MESON) += \
|
|||
meson-gxm-khadas-vim2.dtb \
|
||||
meson-gxm-s912-libretech-pc.dtb \
|
||||
meson-gxm-wetek-core2.dtb \
|
||||
meson-g12a-radxa-zero.dtb \
|
||||
meson-g12a-sei510.dtb \
|
||||
meson-g12a-u200.dtb \
|
||||
meson-g12b-a311d-khadas-vim3.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,7 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2019 BayLibre, SAS.
|
||||
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
||||
*/
|
||||
|
||||
#include "meson-g12-common-u-boot.dtsi"
|
||||
|
|
@ -0,0 +1,405 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2018 BayLibre SAS. All rights reserved.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "meson-g12a.dtsi"
|
||||
#include <dt-bindings/gpio/meson-g12a-gpio.h>
|
||||
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
|
||||
|
||||
/ {
|
||||
compatible = "radxa,zero", "amlogic,g12a";
|
||||
model = "Radxa Zero";
|
||||
|
||||
aliases {
|
||||
serial0 = &uart_AO;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0x0 0x0 0x0 0x40000000>;
|
||||
};
|
||||
|
||||
cvbs-connector {
|
||||
status = "disabled";
|
||||
compatible = "composite-video-connector";
|
||||
|
||||
port {
|
||||
cvbs_connector_in: endpoint {
|
||||
remote-endpoint = <&cvbs_vdac_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-connector {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_connector_in: endpoint {
|
||||
remote-endpoint = <&hdmi_tx_tmds_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
emmc_pwrseq: emmc-pwrseq {
|
||||
compatible = "mmc-pwrseq-emmc";
|
||||
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "ext_clock";
|
||||
};
|
||||
|
||||
ao_5v: regulator-ao_5v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "AO_5V";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_1v8: regulator-vcc_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vcc_3v3: regulator-vcc_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
hdmi_pw: regulator-hdmi_pw {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "HDMI_PW";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&ao_5v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_1v8: regulator-vddao_1v8 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vddao_3v3>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddao_3v3: regulator-vddao_3v3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VDDAO_3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&ao_5v>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vddcpu: regulator-vddcpu {
|
||||
compatible = "pwm-regulator";
|
||||
|
||||
regulator-name = "VDDCPU";
|
||||
regulator-min-microvolt = <721000>;
|
||||
regulator-max-microvolt = <1022000>;
|
||||
|
||||
vin-supply = <&ao_5v>;
|
||||
|
||||
pwms = <&pwm_AO_cd 1 1250 0>;
|
||||
pwm-dutycycle-range = <100 0>;
|
||||
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "amlogic,axg-sound-card";
|
||||
model = "RADXA-ZERO";
|
||||
audio-aux-devs = <&tdmout_b>;
|
||||
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
|
||||
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
|
||||
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
|
||||
"TDM_B Playback", "TDMOUT_B OUT";
|
||||
|
||||
assigned-clocks = <&clkc CLKID_MPLL2>,
|
||||
<&clkc CLKID_MPLL0>,
|
||||
<&clkc CLKID_MPLL1>;
|
||||
assigned-clock-parents = <0>, <0>, <0>;
|
||||
assigned-clock-rates = <294912000>,
|
||||
<270950400>,
|
||||
<393216000>;
|
||||
status = "okay";
|
||||
|
||||
dai-link-0 {
|
||||
sound-dai = <&frddr_a>;
|
||||
};
|
||||
|
||||
dai-link-1 {
|
||||
sound-dai = <&frddr_b>;
|
||||
};
|
||||
|
||||
dai-link-2 {
|
||||
sound-dai = <&frddr_c>;
|
||||
};
|
||||
|
||||
/* 8ch hdmi interface */
|
||||
dai-link-3 {
|
||||
sound-dai = <&tdmif_b>;
|
||||
dai-format = "i2s";
|
||||
dai-tdm-slot-tx-mask-0 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-1 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-2 = <1 1>;
|
||||
dai-tdm-slot-tx-mask-3 = <1 1>;
|
||||
mclk-fs = <256>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
|
||||
};
|
||||
};
|
||||
|
||||
dai-link-4 {
|
||||
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
|
||||
|
||||
codec {
|
||||
sound-dai = <&hdmi_tx>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
wifi32k: wifi32k {
|
||||
compatible = "pwm-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <32768>;
|
||||
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
|
||||
};
|
||||
};
|
||||
|
||||
&arb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cec_AO {
|
||||
pinctrl-0 = <&cec_ao_a_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "disabled";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&cecb_AO {
|
||||
pinctrl-0 = <&cec_ao_b_h_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
hdmi-phandle = <&hdmi_tx>;
|
||||
};
|
||||
|
||||
&clkc_audio {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpu0 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu1 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu2 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cpu3 {
|
||||
cpu-supply = <&vddcpu>;
|
||||
operating-points-v2 = <&cpu_opp_table>;
|
||||
clocks = <&clkc CLKID_CPU_CLK>;
|
||||
clock-latency = <50000>;
|
||||
};
|
||||
|
||||
&cvbs_vdac_port {
|
||||
cvbs_vdac_out: endpoint {
|
||||
remote-endpoint = <&cvbs_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&frddr_a {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&frddr_c {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_tx {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
|
||||
pinctrl-names = "default";
|
||||
hdmi-supply = <&hdmi_pw>;
|
||||
};
|
||||
|
||||
&hdmi_tx_tmds_port {
|
||||
hdmi_tx_tmds_out: endpoint {
|
||||
remote-endpoint = <&hdmi_connector_in>;
|
||||
};
|
||||
};
|
||||
|
||||
&ir {
|
||||
status = "disabled";
|
||||
pinctrl-0 = <&remote_input_ao_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&pwm_AO_cd {
|
||||
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin1";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm_ef {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pwm_e_pins>;
|
||||
pinctrl-names = "default";
|
||||
clocks = <&xtal>;
|
||||
clock-names = "clkin0";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
status = "okay";
|
||||
vref-supply = <&vddao_1v8>;
|
||||
};
|
||||
|
||||
/* SDIO */
|
||||
&sd_emmc_a {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
pinctrl-1 = <&sdio_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
sd-uhs-sdr50;
|
||||
max-frequency = <100000000>;
|
||||
|
||||
non-removable;
|
||||
disable-wp;
|
||||
|
||||
/* WiFi firmware requires power to be kept while in suspend */
|
||||
keep-power-in-suspend;
|
||||
|
||||
mmc-pwrseq = <&sdio_pwrseq>;
|
||||
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_1v8>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SD card */
|
||||
&sd_emmc_b {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&sdcard_c_pins>;
|
||||
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
max-frequency = <100000000>;
|
||||
disable-wp;
|
||||
|
||||
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
|
||||
vmmc-supply = <&vddao_3v3>;
|
||||
vqmmc-supply = <&vddao_3v3>;
|
||||
};
|
||||
|
||||
/* eMMC */
|
||||
&sd_emmc_c {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
|
||||
pinctrl-1 = <&emmc_clk_gate_pins>;
|
||||
pinctrl-names = "default", "clk-gate";
|
||||
|
||||
bus-width = <8>;
|
||||
cap-mmc-highspeed;
|
||||
mmc-ddr-1_8v;
|
||||
mmc-hs200-1_8v;
|
||||
max-frequency = <200000000>;
|
||||
disable-wp;
|
||||
|
||||
mmc-pwrseq = <&emmc_pwrseq>;
|
||||
vmmc-supply = <&vcc_3v3>;
|
||||
vqmmc-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&tdmif_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tdmout_b {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tohdmitx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart_A {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
|
||||
pinctrl-names = "default";
|
||||
uart-has-rtscts;
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
|
||||
max-speed = <2000000>;
|
||||
clocks = <&wifi32k>;
|
||||
clock-names = "lpo";
|
||||
};
|
||||
};
|
||||
|
||||
&uart_AO {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&uart_ao_a_pins>;
|
||||
pinctrl-names = "default";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
Loading…
Reference in New Issue