sunxi: Enable usb ports on the Sinovoip BPI M3
DLDO3 is used to provide Port-D power and PD is used for the usb-hub / sata-5v enable pins. The 2.5V comes from the schematic and matches the factory image fex file. The dts changes are the minimal changes needed for u-boot to pick-up the usb host controllers. The upstream kernel does not (yet) have usb host support. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Ian Campbell <ijc@hellion.org.uk>
This commit is contained in:
		
							parent
							
								
									e6c9cec4ca
								
							
						
					
					
						commit
						b24f7f008d
					
				|  | @ -57,8 +57,16 @@ | ||||||
| 	}; | 	}; | ||||||
| }; | }; | ||||||
| 
 | 
 | ||||||
|  | &ehci0 { | ||||||
|  | 	status = "okay"; | ||||||
|  | }; | ||||||
|  | 
 | ||||||
| &uart0 { | &uart0 { | ||||||
| 	pinctrl-names = "default"; | 	pinctrl-names = "default"; | ||||||
| 	pinctrl-0 = <&uart0_pins_b>; | 	pinctrl-0 = <&uart0_pins_b>; | ||||||
| 	status = "okay"; | 	status = "okay"; | ||||||
| }; | }; | ||||||
|  | 
 | ||||||
|  | &usb_otg { | ||||||
|  | 	status = "okay"; | ||||||
|  | }; | ||||||
|  |  | ||||||
|  | @ -5,6 +5,11 @@ CONFIG_DRAM_TYPE=7 | ||||||
| CONFIG_DRAM_CLK=480 | CONFIG_DRAM_CLK=480 | ||||||
| CONFIG_DRAM_ZQ=15355 | CONFIG_DRAM_ZQ=15355 | ||||||
| CONFIG_DRAM_ODT_EN=y | CONFIG_DRAM_ODT_EN=y | ||||||
|  | CONFIG_INITIAL_USB_SCAN_DELAY=500 | ||||||
|  | CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE" | ||||||
|  | CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT" | ||||||
|  | CONFIG_USB0_ID_DET="PH11" | ||||||
|  | CONFIG_USB1_VBUS_PIN="PD24" | ||||||
| CONFIG_AXP_GPIO=y | CONFIG_AXP_GPIO=y | ||||||
| CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3" | CONFIG_DEFAULT_DEVICE_TREE="sun8i-a83t-sinovoip-bpi-m3" | ||||||
| # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set | # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set | ||||||
|  | @ -13,3 +18,7 @@ CONFIG_SPL=y | ||||||
| # CONFIG_CMD_FLASH is not set | # CONFIG_CMD_FLASH is not set | ||||||
| # CONFIG_CMD_FPGA is not set | # CONFIG_CMD_FPGA is not set | ||||||
| CONFIG_AXP_DCDC5_VOLT=1200 | CONFIG_AXP_DCDC5_VOLT=1200 | ||||||
|  | CONFIG_AXP_DLDO3_VOLT=2500 | ||||||
|  | CONFIG_USB_EHCI_HCD=y | ||||||
|  | CONFIG_USB_MUSB_HOST=y | ||||||
|  | CONFIG_SYS_EXTRA_OPTIONS="SATAPWR=SUNXI_GPD(25)" | ||||||
|  |  | ||||||
		Loading…
	
		Reference in New Issue