i.MX6 (DQ/DLS): use macros for mux and pad declarations

This allows the use of either or both declarations from
the files mx6q_pins.h and mx6dl_pins.h.

All board files should include <asm/arch/mx6-pins.h>
with one of the following defined in boards.cfg
    MX6Q   - for boards targeting i.MX6Q or i.MX6D
    MX6DL  - for boards targeting i.MX6DL
    MX6S   - for boards targeting i.MX6S
    MX6QDL - for boards that support any of the above with
             run-time detection

Pad declarations will be MX6_PAD_x for single-variant boards
and MX6Q_PAD_x and MX6DL_PAD_x for boards supporting both
processor classes.

Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Acked-by: Stefano Babic <sbabic@denx.de>

arch/arm/include/asm/arch-mx6/mx6-pins.h

@@ -6,18 +6,37 @@
 #ifndef __ASM_ARCH_MX6_PINS_H__
 #define __ASM_ARCH_MX6_PINS_H__
 
-#ifdef CONFIG_MX6Q
+#include <asm/imx-common/iomux-v3.h>
+
+#define MX6_PAD_DECLARE(prefix, name, pco, mc, mm, sio, si, pc) \
+	prefix##name = IOMUX_PAD(pco, mc, mm, sio, si, pc)
+
+#ifdef CONFIG_MX6QDL
+enum {
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6Q_PAD_,name, pco, mc, mm, sio, si, pc),
 #include "mx6q_pins.h"
-#else
+#undef MX6_PAD_DECL
-#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6DL_PAD_,name, pco, mc, mm, sio, si, pc),
 #include "mx6dl_pins.h"
-#else
+};
-#if defined(CONFIG_MX6SL)
+#elif defined(CONFIG_MX6Q)
+enum {
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
+#include "mx6q_pins.h"
+};
+#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+enum {
+#define MX6_PAD_DECL(name, pco, mc, mm, sio, si, pc) \
+	MX6_PAD_DECLARE(MX6_PAD_,name, pco, mc, mm, sio, si, pc),
+#include "mx6dl_pins.h"
+};
+#elif defined(CONFIG_MX6SL)
 #include "mx6sl_pins.h"
 #else
 #error "Please select cpu"
-#endif	/* CONFIG_MX6SL */
-#endif	/* CONFIG_MX6DL or CONFIG_MX6S */
 #endif	/* CONFIG_MX6Q */
 
 #endif	/*__ASM_ARCH_MX6_PINS_H__ */

board/barco/titanium/titanium.c

@@ -9,7 +9,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
-#include <asm/arch/mx6q_pins.h>
+#include <asm/arch/mx6-pins.h>
 #include <asm/arch/crm_regs.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/gpio.h>

board/freescale/mx6qarm2/mx6qarm2.c

@@ -7,7 +7,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
-#include <asm/arch/mx6q_pins.h>
+#include <asm/arch/mx6-pins.h>
 #include <asm/arch/clock.h>
 #include <asm/errno.h>
 #include <asm/gpio.h>

board/freescale/mx6qsabreauto/mx6qsabreauto.c

@@ -11,7 +11,7 @@
 #include <asm/arch/clock.h>
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/iomux.h>
-#include <asm/arch/mx6q_pins.h>
+#include <asm/arch/mx6-pins.h>
 #include <asm/errno.h>
 #include <asm/gpio.h>
 #include <asm/imx-common/iomux-v3.h>