rockchip: dts: Sync ROC-RK3399-PC changes from Linux
Sync the ROC-RK3399-PC device tree changes from Linux
with below commit details:
commit <c36308abe4110e4db362d5e2ae3797834a7b1192> ("arm64: dts:
rockchip: Enable MTD Flash on rk3399-roc-pc")
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jagan Teki
Kever Yang
parent
54b85a94e5
commit
c8b1684a8c
|
|
@ -4,677 +4,10 @@
|
|||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
#include "rk3399-roc-pc.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly ROC-RK3399-PC Board";
|
||||
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_vbus_typec0: vcc-vbus-typec0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_vbus_typec0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* should be placed inside mp8859, but not until mp8859 has
|
||||
* its own dt-binding.
|
||||
*/
|
||||
dc_12v: mp8859-dcdc1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <&vcc_vbus_typec0>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_vbus_typec1: vcc-vbus-typec1 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc_vbus_typec1_en>;
|
||||
regulator-name = "vcc_vbus_typec1";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc_sys>;
|
||||
vcc2-supply = <&vcc_sys>;
|
||||
vcc3-supply = <&vcc_sys>;
|
||||
vcc4-supply = <&vcc_sys>;
|
||||
vcc6-supply = <&vcc_sys>;
|
||||
vcc7-supply = <&vcc_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc_sys>;
|
||||
vcc10-supply = <&vcc_sys>;
|
||||
vcc11-supply = <&vcc_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG1 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_hdmi: LDO_REG2 {
|
||||
regulator-name = "vcc1v8_hdmi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca0v9_hdmi: LDO_REG7 {
|
||||
regulator-name = "vcca0v9_hdmi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
fusb1: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb1_int>;
|
||||
vbus-supply = <&vcc_vbus_typec1>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
fusb0: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
vbus-supply = <&vcc_vbus_typec0>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
bt656-supply = <&vcc_3v0>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
sdmmc-supply = <&vcc_sdio>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
lcd-panel {
|
||||
lcd_panel_reset: lcd-panel-reset {
|
||||
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
hub_rst: hub-rst {
|
||||
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
vcc_vbus_typec1_en: vcc-vbus-typec1-en {
|
||||
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb30x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
fusb1_int: fusb1-int {
|
||||
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-mmc-highspeed;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
phy-supply = <&vcc_vbus_typec0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
phy-supply = <&vcc_vbus_typec1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
compatible = "libretech,roc-rk3399-pc", "firefly,roc-rk3399-pc",
|
||||
"rockchip,rk3399";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,813 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include <dt-bindings/input/linux-event-codes.h>
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Firefly ROC-RK3399-PC Board";
|
||||
compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial2:1500000n8";
|
||||
};
|
||||
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&pwm0 0 25000 0>;
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
adc-keys {
|
||||
compatible = "adc-keys";
|
||||
io-channels = <&saradc 1>;
|
||||
io-channel-names = "buttons";
|
||||
keyup-threshold-microvolt = <1500000>;
|
||||
poll-interval = <100>;
|
||||
|
||||
recovery {
|
||||
label = "Recovery";
|
||||
linux,code = <KEY_VENDOR>;
|
||||
press-threshold-microvolt = <18000>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwr_key_l>;
|
||||
|
||||
power {
|
||||
debounce-interval = <100>;
|
||||
gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
|
||||
label = "GPIO Key Power";
|
||||
linux,code = <KEY_POWER>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>, <&yellow_led_gpio>;
|
||||
|
||||
work-led {
|
||||
label = "green:work";
|
||||
gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
|
||||
diy-led {
|
||||
label = "red:diy";
|
||||
gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "mmc1";
|
||||
};
|
||||
|
||||
yellow-led {
|
||||
label = "yellow:yellow-led";
|
||||
gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
linux,default-trigger = "mmc0";
|
||||
};
|
||||
};
|
||||
|
||||
sdio_pwrseq: sdio-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
clocks = <&rk808 1>;
|
||||
clock-names = "ext_clock";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wifi_enable_h>;
|
||||
|
||||
/*
|
||||
* On the module itself this is one of these (depending
|
||||
* on the actual card populated):
|
||||
* - SDIO_RESET_L_WL_REG_ON
|
||||
* - PDN (power down when low)
|
||||
*/
|
||||
reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vcc_vbus_typec0: vcc-vbus-typec0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc_vbus_typec0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* should be placed inside mp8859, but not until mp8859 has
|
||||
* its own dt-binding.
|
||||
*/
|
||||
dc_12v: mp8859-dcdc1 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "dc_12v";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
vin-supply = <&vcc_vbus_typec0>;
|
||||
};
|
||||
|
||||
/* switched by pmic_sleep */
|
||||
vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v8_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
vin-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
vcc3v0_sd: vcc3v0-sd {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc3v0_sd_en>;
|
||||
regulator-name = "vcc3v0_sd";
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vcca_0v9: vcca-0v9 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcca_0v9";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
|
||||
/* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_vbus_typec1: vcc-vbus-typec1 {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc_vbus_typec1_en>;
|
||||
regulator-name = "vcc_vbus_typec1";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc_sys>;
|
||||
};
|
||||
|
||||
vcc_sys: vcc-sys {
|
||||
compatible = "regulator-fixed";
|
||||
enable-active-high;
|
||||
gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc_sys_en>;
|
||||
regulator-name = "vcc_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
vin-supply = <&dc_12v>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 1>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <450000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
pwm-supply = <&vcc3v3_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc_lan>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x28>;
|
||||
rx_delay = <0x11>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpu {
|
||||
mali-supply = <&vdd_gpu>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
ddc-i2c-bus = <&i2c3>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hdmi_cec>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi_sound {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
clock-frequency = <400000>;
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
status = "okay";
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc3v3_sys>;
|
||||
vcc2-supply = <&vcc3v3_sys>;
|
||||
vcc3-supply = <&vcc3v3_sys>;
|
||||
vcc4-supply = <&vcc3v3_sys>;
|
||||
vcc6-supply = <&vcc3v3_sys>;
|
||||
vcc7-supply = <&vcc3v3_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc3v3_sys>;
|
||||
vcc10-supply = <&vcc3v3_sys>;
|
||||
vcc11-supply = <&vcc3v3_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vcc13-supply = <&vcc3v3_sys>;
|
||||
vcc14-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc_3v0>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca1v8_codec: LDO_REG1 {
|
||||
regulator-name = "vcca1v8_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_hdmi: LDO_REG2 {
|
||||
regulator-name = "vcc1v8_hdmi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdio: LDO_REG4 {
|
||||
regulator-name = "vcc_sdio";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca3v0_codec: LDO_REG5 {
|
||||
regulator-name = "vcca3v0_codec";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v5: LDO_REG6 {
|
||||
regulator-name = "vcc_1v5";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1500000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcca0v9_hdmi: LDO_REG7 {
|
||||
regulator-name = "vcca0v9_hdmi";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_3v0: LDO_REG8 {
|
||||
regulator-name = "vcc_3v0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: vcc_lan: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_b: regulator@40 {
|
||||
compatible = "silergy,syr827";
|
||||
reg = <0x40>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel1_gpio>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@41 {
|
||||
compatible = "silergy,syr828";
|
||||
reg = <0x41>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vsel2_gpio>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <712500>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
vin-supply = <&vcc3v3_sys>;
|
||||
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
i2c-scl-rising-time-ns = <300>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
i2c-scl-rising-time-ns = <450>;
|
||||
i2c-scl-falling-time-ns = <15>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
fusb1: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb1_int>;
|
||||
vbus-supply = <&vcc_vbus_typec1>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
i2c-scl-rising-time-ns = <600>;
|
||||
i2c-scl-falling-time-ns = <20>;
|
||||
status = "okay";
|
||||
|
||||
fusb0: usb-typec@22 {
|
||||
compatible = "fcs,fusb302";
|
||||
reg = <0x22>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&fusb0_int>;
|
||||
vbus-supply = <&vcc_vbus_typec0>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&i2s0 {
|
||||
rockchip,playback-channels = <8>;
|
||||
rockchip,capture-channels = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s1 {
|
||||
rockchip,playback-channels = <2>;
|
||||
rockchip,capture-channels = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2s2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
audio-supply = <&vcca1v8_codec>;
|
||||
bt656-supply = <&vcc_3v0>;
|
||||
gpio1830-supply = <&vcc_3v0>;
|
||||
sdmmc-supply = <&vcc_sdio>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
pmu1830-supply = <&vcc_3v0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
buttons {
|
||||
pwr_key_l: pwr-key-l {
|
||||
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
lcd-panel {
|
||||
lcd_panel_reset: lcd-panel-reset {
|
||||
rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
diy_led_gpio: diy_led-gpio {
|
||||
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
work_led_gpio: work_led-gpio {
|
||||
rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
yellow_led_gpio: yellow_led-gpio {
|
||||
rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
vsel1_gpio: vsel1-gpio {
|
||||
rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
|
||||
vsel2_gpio: vsel2-gpio {
|
||||
rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
|
||||
};
|
||||
};
|
||||
|
||||
sdio-pwrseq {
|
||||
wifi_enable_h: wifi-enable-h {
|
||||
rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
sdmmc {
|
||||
vcc3v0_sd_en: vcc3v0-sd-en {
|
||||
rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
vcc_sys_en: vcc-sys-en {
|
||||
rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
|
||||
hub_rst: hub-rst {
|
||||
rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
|
||||
};
|
||||
};
|
||||
|
||||
usb-typec {
|
||||
vcc_vbus_typec1_en: vcc-vbus-typec1-en {
|
||||
rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
fusb30x {
|
||||
fusb0_int: fusb0-int {
|
||||
rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
|
||||
fusb1_int: fusb1-int {
|
||||
rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&saradc {
|
||||
vref-supply = <&vcca1v8_s3>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
bus-width = <4>;
|
||||
cap-sd-highspeed;
|
||||
cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
|
||||
disable-wp;
|
||||
max-frequency = <150000000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
|
||||
sd-uhs-sdr104;
|
||||
vmmc-supply = <&vcc3v0_sd>;
|
||||
vqmmc-supply = <&vcc_sdio>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <10000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&tcphy0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcphy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tsadc {
|
||||
/* tshut mode 0:CRU 1:GPIO */
|
||||
rockchip,hw-tshut-mode = <1>;
|
||||
/* tshut polarity 0:LOW 1:HIGH */
|
||||
rockchip,hw-tshut-polarity = <1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&u2phy0 {
|
||||
status = "okay";
|
||||
|
||||
u2phy0_otg: otg-port {
|
||||
phy-supply = <&vcc_vbus_typec0>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy0_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
phy-supply = <&vcc_vbus_typec1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_xfer &uart0_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&vopb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopb_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vopl_mmu {
|
||||
status = "okay";
|
||||
};
|
||||
Loading…
Reference in New Issue