arm, imx6: add aristainetos board
CPU: Freescale i.MX6DL rev1.1 at 792 MHz Board: aristaitenos I2C: ready DRAM: 1 GiB NAND: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 SF: Detected N25Q128 with page size 256 Bytes, erase size 64 KiB, total 16 MiB Display: lb07wv8 (800x480) - UART5 is console - MMC 0 and 1 - USB 0 and 1 - boot from mmc0 and spi nor flash - Splash screen support Signed-off-by: Heiko Schocher <hs@denx.de> Cc: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Heiko Schocher
Stefano Babic
parent
562f8df18d
commit
e379c03902
|
|
@ -0,0 +1,9 @@
|
||||||
|
#
|
||||||
|
# Copyright (C) 2007, Guennadi Liakhovetski <lg@denx.de>
|
||||||
|
#
|
||||||
|
# (C) Copyright 2011 Freescale Semiconductor, Inc.
|
||||||
|
#
|
||||||
|
# SPDX-License-Identifier: GPL-2.0+
|
||||||
|
#
|
||||||
|
|
||||||
|
obj-y := aristainetos.o
|
||||||
|
|
@ -0,0 +1,519 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2014
|
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
||||||
|
*
|
||||||
|
* Based on:
|
||||||
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* Author: Fabio Estevam <fabio.estevam@freescale.com>
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <asm/arch/clock.h>
|
||||||
|
#include <asm/arch/imx-regs.h>
|
||||||
|
#include <asm/arch/iomux.h>
|
||||||
|
#include <asm/arch/mx6-pins.h>
|
||||||
|
#include <asm/errno.h>
|
||||||
|
#include <asm/gpio.h>
|
||||||
|
#include <asm/imx-common/iomux-v3.h>
|
||||||
|
#include <asm/imx-common/boot_mode.h>
|
||||||
|
#include <asm/imx-common/mxc_i2c.h>
|
||||||
|
#include <asm/imx-common/video.h>
|
||||||
|
#include <mmc.h>
|
||||||
|
#include <fsl_esdhc.h>
|
||||||
|
#include <miiphy.h>
|
||||||
|
#include <netdev.h>
|
||||||
|
#include <asm/arch/mxc_hdmi.h>
|
||||||
|
#include <asm/arch/crm_regs.h>
|
||||||
|
#include <linux/fb.h>
|
||||||
|
#include <ipu_pixfmt.h>
|
||||||
|
#include <asm/io.h>
|
||||||
|
#include <asm/arch/sys_proto.h>
|
||||||
|
#include <pwm.h>
|
||||||
|
|
||||||
|
DECLARE_GLOBAL_DATA_PTR;
|
||||||
|
|
||||||
|
#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||||
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
|
||||||
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||||
|
|
||||||
|
#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
|
||||||
|
PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
|
||||||
|
PAD_CTL_SRE_FAST | PAD_CTL_HYS)
|
||||||
|
|
||||||
|
#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||||
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
|
||||||
|
|
||||||
|
#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
|
||||||
|
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
|
||||||
|
|
||||||
|
#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
|
||||||
|
PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
|
||||||
|
PAD_CTL_ODE | PAD_CTL_SRE_FAST)
|
||||||
|
|
||||||
|
#define PC MUX_PAD_CTRL(I2C_PAD_CTRL)
|
||||||
|
|
||||||
|
#define DISP_PAD_CTRL (0x10)
|
||||||
|
|
||||||
|
#define ECSPI4_CS1 IMX_GPIO_NR(5, 2)
|
||||||
|
|
||||||
|
struct i2c_pads_info i2c_pad_info1 = {
|
||||||
|
.scl = {
|
||||||
|
.i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL | PC,
|
||||||
|
.gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27 | PC,
|
||||||
|
.gp = IMX_GPIO_NR(5, 27)
|
||||||
|
},
|
||||||
|
.sda = {
|
||||||
|
.i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA | PC,
|
||||||
|
.gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26 | PC,
|
||||||
|
.gp = IMX_GPIO_NR(5, 26)
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct i2c_pads_info i2c_pad_info2 = {
|
||||||
|
.scl = {
|
||||||
|
.i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC,
|
||||||
|
.gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC,
|
||||||
|
.gp = IMX_GPIO_NR(4, 12)
|
||||||
|
},
|
||||||
|
.sda = {
|
||||||
|
.i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA | PC,
|
||||||
|
.gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13 | PC,
|
||||||
|
.gp = IMX_GPIO_NR(4, 13)
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
struct i2c_pads_info i2c_pad_info3 = {
|
||||||
|
.scl = {
|
||||||
|
.i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC,
|
||||||
|
.gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC,
|
||||||
|
.gp = IMX_GPIO_NR(3, 17)
|
||||||
|
},
|
||||||
|
.sda = {
|
||||||
|
.i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC,
|
||||||
|
.gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC,
|
||||||
|
.gp = IMX_GPIO_NR(3, 18)
|
||||||
|
}
|
||||||
|
};
|
||||||
|
|
||||||
|
int dram_init(void)
|
||||||
|
{
|
||||||
|
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const uart1_pads[] = {
|
||||||
|
MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const uart5_pads[] = {
|
||||||
|
MX6_PAD_CSI0_DAT14__UART5_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
MX6_PAD_CSI0_DAT15__UART5_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const gpio_pads[] = {
|
||||||
|
/* LED enable */
|
||||||
|
MX6_PAD_SD4_DAT5__GPIO2_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* spi flash WP protect */
|
||||||
|
MX6_PAD_SD4_DAT7__GPIO2_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* backlight enable */
|
||||||
|
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* LED yellow */
|
||||||
|
MX6_PAD_GPIO_3__GPIO1_IO03 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* LED red */
|
||||||
|
MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* LED green */
|
||||||
|
MX6_PAD_GPIO_5__GPIO1_IO05 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* LED blue */
|
||||||
|
MX6_PAD_GPIO_6__GPIO1_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* i2c4 scl */
|
||||||
|
MX6_PAD_GPIO_7__GPIO1_IO07 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* i2c4 sda */
|
||||||
|
MX6_PAD_GPIO_8__GPIO1_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* spi CS 1 */
|
||||||
|
MX6_PAD_EIM_A25__GPIO5_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static iomux_v3_cfg_t const misc_pads[] = {
|
||||||
|
MX6_PAD_GPIO_1__USB_OTG_ID | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
/* OTG Power enable */
|
||||||
|
MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_KEY_ROW4__GPIO4_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const enet_pads[] = {
|
||||||
|
MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(0x4001b0a8),
|
||||||
|
MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_RX_ER__ENET_RX_ER | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void setup_iomux_enet(void)
|
||||||
|
{
|
||||||
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
||||||
|
|
||||||
|
imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
|
||||||
|
|
||||||
|
/* set GPIO_16 as ENET_REF_CLK_OUT */
|
||||||
|
setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_ENET_CLK_SEL_MASK);
|
||||||
|
}
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const usdhc1_pads[] = {
|
||||||
|
MX6_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD1_DAT0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD1_DAT1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD1_DAT2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD1_DAT3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const usdhc2_pads[] = {
|
||||||
|
MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
iomux_v3_cfg_t const ecspi4_pads[] = {
|
||||||
|
MX6_PAD_EIM_D21__ECSPI4_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_EIM_D22__ECSPI4_MISO | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_EIM_D28__ECSPI4_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_EIM_D20__GPIO3_IO20 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static iomux_v3_cfg_t const display_pads[] = {
|
||||||
|
MX6_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK | MUX_PAD_CTRL(DISP_PAD_CTRL),
|
||||||
|
MX6_PAD_DI0_PIN15__IPU1_DI0_PIN15,
|
||||||
|
MX6_PAD_DI0_PIN2__IPU1_DI0_PIN02,
|
||||||
|
MX6_PAD_DI0_PIN3__IPU1_DI0_PIN03,
|
||||||
|
MX6_PAD_DI0_PIN4__GPIO4_IO20,
|
||||||
|
MX6_PAD_DISP0_DAT0__IPU1_DISP0_DATA00,
|
||||||
|
MX6_PAD_DISP0_DAT1__IPU1_DISP0_DATA01,
|
||||||
|
MX6_PAD_DISP0_DAT2__IPU1_DISP0_DATA02,
|
||||||
|
MX6_PAD_DISP0_DAT3__IPU1_DISP0_DATA03,
|
||||||
|
MX6_PAD_DISP0_DAT4__IPU1_DISP0_DATA04,
|
||||||
|
MX6_PAD_DISP0_DAT5__IPU1_DISP0_DATA05,
|
||||||
|
MX6_PAD_DISP0_DAT6__IPU1_DISP0_DATA06,
|
||||||
|
MX6_PAD_DISP0_DAT7__IPU1_DISP0_DATA07,
|
||||||
|
MX6_PAD_DISP0_DAT8__IPU1_DISP0_DATA08,
|
||||||
|
MX6_PAD_DISP0_DAT9__IPU1_DISP0_DATA09,
|
||||||
|
MX6_PAD_DISP0_DAT10__IPU1_DISP0_DATA10,
|
||||||
|
MX6_PAD_DISP0_DAT11__IPU1_DISP0_DATA11,
|
||||||
|
MX6_PAD_DISP0_DAT12__IPU1_DISP0_DATA12,
|
||||||
|
MX6_PAD_DISP0_DAT13__IPU1_DISP0_DATA13,
|
||||||
|
MX6_PAD_DISP0_DAT14__IPU1_DISP0_DATA14,
|
||||||
|
MX6_PAD_DISP0_DAT15__IPU1_DISP0_DATA15,
|
||||||
|
MX6_PAD_DISP0_DAT16__IPU1_DISP0_DATA16,
|
||||||
|
MX6_PAD_DISP0_DAT17__IPU1_DISP0_DATA17,
|
||||||
|
MX6_PAD_DISP0_DAT18__IPU1_DISP0_DATA18,
|
||||||
|
MX6_PAD_DISP0_DAT19__IPU1_DISP0_DATA19,
|
||||||
|
MX6_PAD_DISP0_DAT20__IPU1_DISP0_DATA20,
|
||||||
|
MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21,
|
||||||
|
MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22,
|
||||||
|
MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23,
|
||||||
|
};
|
||||||
|
|
||||||
|
static iomux_v3_cfg_t const backlight_pads[] = {
|
||||||
|
MX6_PAD_GPIO_9__PWM1_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_SD4_DAT1__PWM3_OUT | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void setup_spi(void)
|
||||||
|
{
|
||||||
|
int i;
|
||||||
|
|
||||||
|
imx_iomux_v3_setup_multiple_pads(ecspi4_pads, ARRAY_SIZE(ecspi4_pads));
|
||||||
|
for (i = 0; i < 3; i++)
|
||||||
|
enable_spi_clk(true, i);
|
||||||
|
|
||||||
|
/* set cs1 to high */
|
||||||
|
gpio_direction_output(ECSPI4_CS1, 1);
|
||||||
|
}
|
||||||
|
|
||||||
|
static void setup_iomux_gpio(void)
|
||||||
|
{
|
||||||
|
imx_iomux_v3_setup_multiple_pads(gpio_pads, ARRAY_SIZE(gpio_pads));
|
||||||
|
}
|
||||||
|
|
||||||
|
static void setup_iomux_uart(void)
|
||||||
|
{
|
||||||
|
imx_iomux_v3_setup_multiple_pads(uart5_pads, ARRAY_SIZE(uart5_pads));
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_FSL_ESDHC
|
||||||
|
struct fsl_esdhc_cfg usdhc_cfg[2] = {
|
||||||
|
{USDHC1_BASE_ADDR},
|
||||||
|
{USDHC2_BASE_ADDR},
|
||||||
|
};
|
||||||
|
|
||||||
|
int board_mmc_getcd(struct mmc *mmc)
|
||||||
|
{
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_mmc_init(bd_t *bis)
|
||||||
|
{
|
||||||
|
usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
|
||||||
|
usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
|
||||||
|
|
||||||
|
imx_iomux_v3_setup_multiple_pads(usdhc1_pads, ARRAY_SIZE(usdhc1_pads));
|
||||||
|
imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
|
||||||
|
|
||||||
|
return fsl_esdhc_initialize(bis, &usdhc_cfg[0]) |
|
||||||
|
fsl_esdhc_initialize(bis, &usdhc_cfg[1]);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Do not overwrite the console
|
||||||
|
* Use always serial for U-Boot console
|
||||||
|
*/
|
||||||
|
int overwrite_console(void)
|
||||||
|
{
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_eth_init(bd_t *bis)
|
||||||
|
{
|
||||||
|
struct iomuxc *iomuxc_regs =
|
||||||
|
(struct iomuxc *)IOMUXC_BASE_ADDR;
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
setup_iomux_enet();
|
||||||
|
/* clear gpr1[14], gpr1[18:17] to select anatop clock */
|
||||||
|
clrsetbits_le32(&iomuxc_regs->gpr[1], IOMUX_GPR1_FEC_MASK, 0);
|
||||||
|
|
||||||
|
ret = enable_fec_anatop_clock(ENET_50MHz);
|
||||||
|
if (ret)
|
||||||
|
return ret;
|
||||||
|
|
||||||
|
return cpu_eth_init(bis);
|
||||||
|
}
|
||||||
|
#if defined(CONFIG_VIDEO_IPUV3)
|
||||||
|
|
||||||
|
static void enable_lvds(struct display_info_t const *dev)
|
||||||
|
{
|
||||||
|
imx_iomux_v3_setup_multiple_pads(
|
||||||
|
display_pads,
|
||||||
|
ARRAY_SIZE(display_pads));
|
||||||
|
imx_iomux_v3_setup_multiple_pads(
|
||||||
|
backlight_pads,
|
||||||
|
ARRAY_SIZE(backlight_pads));
|
||||||
|
|
||||||
|
/* enable backlight PWM 3 */
|
||||||
|
if (pwm_init(2, 0, 0))
|
||||||
|
goto error;
|
||||||
|
/* duty cycle 200ns, period: 3000ns */
|
||||||
|
if (pwm_config(2, 200, 3000))
|
||||||
|
goto error;
|
||||||
|
if (pwm_enable(2))
|
||||||
|
goto error;
|
||||||
|
return;
|
||||||
|
|
||||||
|
error:
|
||||||
|
puts("error init pwm for backlight\n");
|
||||||
|
return;
|
||||||
|
}
|
||||||
|
|
||||||
|
struct display_info_t const displays[] = {
|
||||||
|
{
|
||||||
|
.bus = -1,
|
||||||
|
.addr = 0,
|
||||||
|
.pixfmt = IPU_PIX_FMT_RGB24,
|
||||||
|
.detect = NULL,
|
||||||
|
.enable = enable_lvds,
|
||||||
|
.mode = {
|
||||||
|
.name = "lb07wv8",
|
||||||
|
.refresh = 60,
|
||||||
|
.xres = 800,
|
||||||
|
.yres = 480,
|
||||||
|
.pixclock = 33246,
|
||||||
|
.left_margin = 88,
|
||||||
|
.right_margin = 88,
|
||||||
|
.upper_margin = 10,
|
||||||
|
.lower_margin = 10,
|
||||||
|
.hsync_len = 25,
|
||||||
|
.vsync_len = 1,
|
||||||
|
.sync = 0,
|
||||||
|
.vmode = FB_VMODE_NONINTERLACED
|
||||||
|
}
|
||||||
|
}
|
||||||
|
};
|
||||||
|
size_t display_count = ARRAY_SIZE(displays);
|
||||||
|
|
||||||
|
static void setup_display(void)
|
||||||
|
{
|
||||||
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
||||||
|
int reg;
|
||||||
|
|
||||||
|
enable_ipu_clock();
|
||||||
|
|
||||||
|
reg = readl(&mxc_ccm->cs2cdr);
|
||||||
|
/* select pll 5 clock */
|
||||||
|
reg &= MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK;
|
||||||
|
reg &= MXC_CCM_CS2CDR_LDB_DI1_CLK_SEL_MASK;
|
||||||
|
writel(reg, &mxc_ccm->cs2cdr);
|
||||||
|
|
||||||
|
imx_iomux_v3_setup_multiple_pads(backlight_pads,
|
||||||
|
ARRAY_SIZE(backlight_pads));
|
||||||
|
}
|
||||||
|
|
||||||
|
/* no console on this board */
|
||||||
|
int board_cfb_skip(void)
|
||||||
|
{
|
||||||
|
return 1;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
int board_early_init_f(void)
|
||||||
|
{
|
||||||
|
setup_iomux_uart();
|
||||||
|
setup_iomux_gpio();
|
||||||
|
|
||||||
|
#if defined(CONFIG_VIDEO_IPUV3)
|
||||||
|
setup_display();
|
||||||
|
#endif
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
iomux_v3_cfg_t nfc_pads[] = {
|
||||||
|
MX6_PAD_NANDF_CLE__NAND_CLE | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_ALE__NAND_ALE | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_WP_B__NAND_WP_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_RB0__NAND_READY_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_CS0__NAND_CE0_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_CS1__NAND_CE1_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_CS2__NAND_CE2_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_CS3__NAND_CE3_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_SD4_CMD__NAND_RE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_SD4_CLK__NAND_WE_B | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D0__NAND_DATA00 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D1__NAND_DATA01 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D2__NAND_DATA02 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D3__NAND_DATA03 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D4__NAND_DATA04 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D5__NAND_DATA05 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D6__NAND_DATA06 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_NANDF_D7__NAND_DATA07 | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
MX6_PAD_SD4_DAT0__NAND_DQS | MUX_PAD_CTRL(NO_PAD_CTRL),
|
||||||
|
};
|
||||||
|
|
||||||
|
static void setup_gpmi_nand(void)
|
||||||
|
{
|
||||||
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
||||||
|
|
||||||
|
/* config gpmi nand iomux */
|
||||||
|
imx_iomux_v3_setup_multiple_pads(nfc_pads,
|
||||||
|
ARRAY_SIZE(nfc_pads));
|
||||||
|
|
||||||
|
/* config gpmi and bch clock to 100 MHz */
|
||||||
|
clrsetbits_le32(&mxc_ccm->cs2cdr,
|
||||||
|
MXC_CCM_CS2CDR_ENFC_CLK_PODF_MASK |
|
||||||
|
MXC_CCM_CS2CDR_ENFC_CLK_PRED_MASK |
|
||||||
|
MXC_CCM_CS2CDR_ENFC_CLK_SEL_MASK,
|
||||||
|
MXC_CCM_CS2CDR_ENFC_CLK_PODF(0) |
|
||||||
|
MXC_CCM_CS2CDR_ENFC_CLK_PRED(3) |
|
||||||
|
MXC_CCM_CS2CDR_ENFC_CLK_SEL(3));
|
||||||
|
|
||||||
|
/* enable gpmi and bch clock gating */
|
||||||
|
setbits_le32(&mxc_ccm->CCGR4,
|
||||||
|
MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
|
||||||
|
MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
|
||||||
|
MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
|
||||||
|
MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
|
||||||
|
MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_OFFSET);
|
||||||
|
|
||||||
|
/* enable apbh clock gating */
|
||||||
|
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_init(void)
|
||||||
|
{
|
||||||
|
struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
|
||||||
|
|
||||||
|
/* address of boot parameters */
|
||||||
|
gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
|
||||||
|
|
||||||
|
setup_spi();
|
||||||
|
|
||||||
|
setup_i2c(0, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
||||||
|
&i2c_pad_info1);
|
||||||
|
setup_i2c(1, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
||||||
|
&i2c_pad_info2);
|
||||||
|
setup_i2c(2, CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE,
|
||||||
|
&i2c_pad_info3);
|
||||||
|
|
||||||
|
/* i2c4 not used, set it to gpio input */
|
||||||
|
gpio_request(IMX_GPIO_NR(1, 7), "i2c4_scl");
|
||||||
|
gpio_direction_input(IMX_GPIO_NR(1, 7));
|
||||||
|
gpio_request(IMX_GPIO_NR(1, 8), "i2c4_sda");
|
||||||
|
gpio_direction_input(IMX_GPIO_NR(1, 8));
|
||||||
|
|
||||||
|
/* SPI NOR Flash read only */
|
||||||
|
gpio_request(CONFIG_GPIO_ENABLE_SPI_FLASH, "ena_spi_nor");
|
||||||
|
gpio_direction_output(CONFIG_GPIO_ENABLE_SPI_FLASH, 0);
|
||||||
|
gpio_free(CONFIG_GPIO_ENABLE_SPI_FLASH);
|
||||||
|
|
||||||
|
/* enable LED */
|
||||||
|
gpio_request(IMX_GPIO_NR(2, 13), "LED ena");
|
||||||
|
gpio_direction_output(IMX_GPIO_NR(2, 13), 0);
|
||||||
|
|
||||||
|
gpio_request(IMX_GPIO_NR(1, 3), "LED yellow");
|
||||||
|
gpio_direction_output(IMX_GPIO_NR(1, 3), 1);
|
||||||
|
gpio_request(IMX_GPIO_NR(1, 4), "LED red");
|
||||||
|
gpio_direction_output(IMX_GPIO_NR(1, 4), 1);
|
||||||
|
gpio_request(IMX_GPIO_NR(1, 5), "LED green");
|
||||||
|
gpio_direction_output(IMX_GPIO_NR(1, 5), 1);
|
||||||
|
gpio_request(IMX_GPIO_NR(1, 6), "LED blue");
|
||||||
|
gpio_direction_output(IMX_GPIO_NR(1, 6), 1);
|
||||||
|
|
||||||
|
setup_gpmi_nand();
|
||||||
|
|
||||||
|
/* GPIO_1 for USB_OTG_ID */
|
||||||
|
setbits_le32(&iomux->gpr[1], IOMUXC_GPR1_USB_OTG_ID_SEL_MASK);
|
||||||
|
imx_iomux_v3_setup_multiple_pads(misc_pads, ARRAY_SIZE(misc_pads));
|
||||||
|
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int checkboard(void)
|
||||||
|
{
|
||||||
|
puts("Board: aristaitenos\n");
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef CONFIG_USB_EHCI_MX6
|
||||||
|
int board_ehci_hcd_init(int port)
|
||||||
|
{
|
||||||
|
int ret;
|
||||||
|
|
||||||
|
ret = gpio_request(ARISTAINETOS_USB_H1_PWR, "usb-h1-pwr");
|
||||||
|
if (!ret)
|
||||||
|
gpio_direction_output(ARISTAINETOS_USB_H1_PWR, 1);
|
||||||
|
ret = gpio_request(ARISTAINETOS_USB_OTG_PWR, "usb-OTG-pwr");
|
||||||
|
if (!ret)
|
||||||
|
gpio_direction_output(ARISTAINETOS_USB_OTG_PWR, 1);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
|
||||||
|
int board_ehci_power(int port, int on)
|
||||||
|
{
|
||||||
|
if (port)
|
||||||
|
gpio_set_value(ARISTAINETOS_USB_OTG_PWR, on);
|
||||||
|
else
|
||||||
|
gpio_set_value(ARISTAINETOS_USB_H1_PWR, on);
|
||||||
|
return 0;
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,33 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2014
|
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
||||||
|
*
|
||||||
|
* Based on:
|
||||||
|
* Copyright (C) 2013 Boundary Devices
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*
|
||||||
|
* Refer doc/README.imximage for more details about how-to configure
|
||||||
|
* and create imximage boot image
|
||||||
|
*
|
||||||
|
* The syntax is taken as close as possible with the kwbimage
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* image version */
|
||||||
|
IMAGE_VERSION 2
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Boot Device : one of
|
||||||
|
* spi, sd
|
||||||
|
*/
|
||||||
|
BOOT_FROM spi
|
||||||
|
|
||||||
|
#define __ASSEMBLY__
|
||||||
|
#include <config.h>
|
||||||
|
#include "asm/arch/mx6-ddr.h"
|
||||||
|
#include "asm/arch/iomux.h"
|
||||||
|
#include "asm/arch/crm_regs.h"
|
||||||
|
|
||||||
|
#include "ddr-setup.cfg"
|
||||||
|
#include "mt41j128M.cfg"
|
||||||
|
#include "clocks.cfg"
|
||||||
|
|
@ -0,0 +1,24 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2013 Boundary Devices
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*
|
||||||
|
* Device Configuration Data (DCD)
|
||||||
|
*
|
||||||
|
* Each entry must have the format:
|
||||||
|
* Addr-type Address Value
|
||||||
|
*
|
||||||
|
* where:
|
||||||
|
* Addr-type register length (1,2 or 4 bytes)
|
||||||
|
* Address absolute address of the register
|
||||||
|
* value value to be stored in the register
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* set the default clock gate to save power */
|
||||||
|
DATA 4, CCM_CCGR0, 0x00c03f3f
|
||||||
|
DATA 4, CCM_CCGR1, 0x0030fcff
|
||||||
|
DATA 4, CCM_CCGR2, 0x0fffcfc0
|
||||||
|
DATA 4, CCM_CCGR3, 0x3ff0300f
|
||||||
|
DATA 4, CCM_CCGR4, 0xfffff30c /* enable NAND/GPMI/BCH clocks */
|
||||||
|
DATA 4, CCM_CCGR5, 0x0f0000c3
|
||||||
|
DATA 4, CCM_CCGR6, 0x000003ff
|
||||||
|
|
@ -0,0 +1,61 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2013 Boundary Devices
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*
|
||||||
|
* Device Configuration Data (DCD)
|
||||||
|
*
|
||||||
|
* Each entry must have the format:
|
||||||
|
* Addr-type Address Value
|
||||||
|
*
|
||||||
|
* where:
|
||||||
|
* Addr-type register length (1,2 or 4 bytes)
|
||||||
|
* Address absolute address of the register
|
||||||
|
* value value to be stored in the register
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* DDR IO TYPE */
|
||||||
|
DATA 4, MX6_IOM_GRP_DDR_TYPE, 0x000C0000
|
||||||
|
DATA 4, MX6_IOM_GRP_DDRPKE, 0x00000000
|
||||||
|
/* Clock */
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDCLK_0, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDCLK_1, 0x00000030
|
||||||
|
/* Address */
|
||||||
|
DATA 4, MX6_IOM_DRAM_CAS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_RAS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_ADDDS, 0x00000030
|
||||||
|
/* Control */
|
||||||
|
DATA 4, MX6_IOM_DRAM_RESET, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDCKE0, 0x00003000
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDCKE1, 0x00003000
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDBA2, 0x00000000
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDODT0, 0x00003030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDODT1, 0x00003030
|
||||||
|
DATA 4, MX6_IOM_GRP_CTLDS, 0x00000030
|
||||||
|
/* Data Strobe */
|
||||||
|
DATA 4, MX6_IOM_DDRMODE_CTL, 0x00020000
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS0, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS1, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS2, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS3, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS4, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS5, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS6, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_SDQS7, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_DDRMODE, 0x00020000
|
||||||
|
DATA 4, MX6_IOM_GRP_B0DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B1DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B2DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B3DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B4DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B5DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B6DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_GRP_B7DS, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM0, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM1, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM2, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM3, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM4, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM5, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM6, 0x00000030
|
||||||
|
DATA 4, MX6_IOM_DRAM_DQM7, 0x00000030
|
||||||
|
|
@ -0,0 +1,70 @@
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2013 Boundary Devices
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
/* ZQ Calibration */
|
||||||
|
DATA 4, MX6_MMDC_P0_MPZQHWCTRL, 0xa1390003
|
||||||
|
DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xa1390003
|
||||||
|
DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001F001F
|
||||||
|
DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F
|
||||||
|
DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001F001F
|
||||||
|
DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x001F001F
|
||||||
|
/*
|
||||||
|
* DQS gating, read delay, write delay calibration values
|
||||||
|
* based on calibration compare of 0x00ffff00
|
||||||
|
*/
|
||||||
|
DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x420E020E
|
||||||
|
DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x02000200
|
||||||
|
DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x42020202
|
||||||
|
DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x01720172
|
||||||
|
DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x494C4F4C
|
||||||
|
DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x4A4C4C49
|
||||||
|
DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x3F3F3133
|
||||||
|
DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x39373F2E
|
||||||
|
/* read data bit delay */
|
||||||
|
DATA 4, MX6_MMDC_P0_MPRDDQBY0DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P0_MPRDDQBY1DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P0_MPRDDQBY2DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P0_MPRDDQBY3DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P1_MPRDDQBY0DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P1_MPRDDQBY1DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P1_MPRDDQBY2DL, 0x33333333
|
||||||
|
DATA 4, MX6_MMDC_P1_MPRDDQBY3DL, 0x33333333
|
||||||
|
/* Complete calibration by forced measurment */
|
||||||
|
DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800
|
||||||
|
DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800
|
||||||
|
/* in DDR3, 64-bit mode, only MMDC0 is initiated */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002002d
|
||||||
|
DATA 4, MX6_MMDC_P0_MDOTC, 0x00333030
|
||||||
|
DATA 4, MX6_MMDC_P0_MDCFG0, 0x40445323
|
||||||
|
DATA 4, MX6_MMDC_P0_MDCFG1, 0xb66e8c63
|
||||||
|
DATA 4, MX6_MMDC_P0_MDCFG2, 0x01ff00db
|
||||||
|
DATA 4, MX6_MMDC_P0_MDMISC, 0x00081740
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008000
|
||||||
|
DATA 4, MX6_MMDC_P0_MDRWD, 0x000026d2
|
||||||
|
DATA 4, MX6_MMDC_P0_MDOR, 0x00440e21
|
||||||
|
DATA 4, MX6_MMDC_P0_MDASP, 0x00000027
|
||||||
|
DATA 4, MX6_MMDC_P0_MDCTL, 0x84190000
|
||||||
|
/* MR2 */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008032
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x0400803a
|
||||||
|
/* MR3 */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00008033
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x0000803b
|
||||||
|
/* MR1 */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00428031
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00428039
|
||||||
|
/* MR0 */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x07208030
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x07208038
|
||||||
|
/* ZQ calibration */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008040
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x04008048
|
||||||
|
/* final ddr setup */
|
||||||
|
DATA 4, MX6_MMDC_P0_MDREF, 0x00005800
|
||||||
|
DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00000007
|
||||||
|
DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00000007
|
||||||
|
DATA 4, MX6_MMDC_P0_MDPDC, 0x0002556d
|
||||||
|
DATA 4, MX6_MMDC_P1_MAPSR, 0x00011006
|
||||||
|
DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000
|
||||||
|
|
@ -311,6 +311,7 @@ Active arm armv7 mx5 freescale mx53smd
|
||||||
Active arm armv7 mx5 genesi mx51_efikamx mx51_efikamx mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg -
|
Active arm armv7 mx5 genesi mx51_efikamx mx51_efikamx mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg -
|
||||||
Active arm armv7 mx5 genesi mx51_efikamx mx51_efikasb mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg -
|
Active arm armv7 mx5 genesi mx51_efikamx mx51_efikasb mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg -
|
||||||
Active arm armv7 mx5 ttcontrol vision2 vision2 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg Stefano Babic <sbabic@denx.de>
|
Active arm armv7 mx5 ttcontrol vision2 vision2 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg Stefano Babic <sbabic@denx.de>
|
||||||
|
Active arm armv7 mx6 - aristainetos aristainetos aristainetos:IMX_CONFIG=board/aristainetos/aristainetos.cfg,MX6DL Heiko Schocher <hs@denx.de>
|
||||||
Active arm armv7 mx6 - udoo udoo_quad udoo:IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com>
|
Active arm armv7 mx6 - udoo udoo_quad udoo:IMX_CONFIG=board/udoo/udoo.cfg,MX6Q,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com>
|
||||||
Active arm armv7 mx6 - wandboard wandboard_dl wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com>
|
Active arm armv7 mx6 - wandboard wandboard_dl wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6dl.cfg,MX6DL,DDR_MB=1024 Fabio Estevam <fabio.estevam@freescale.com>
|
||||||
Active arm armv7 mx6 - wandboard wandboard_quad wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 Fabio Estevam <fabio.estevam@freescale.com>
|
Active arm armv7 mx6 - wandboard wandboard_quad wandboard:IMX_CONFIG=board/boundary/nitrogen6x/nitrogen6q2g.cfg,MX6Q,DDR_MB=2048 Fabio Estevam <fabio.estevam@freescale.com>
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,325 @@
|
||||||
|
/*
|
||||||
|
* (C) Copyright 2014
|
||||||
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
||||||
|
*
|
||||||
|
* Based on:
|
||||||
|
* Copyright (C) 2012 Freescale Semiconductor, Inc.
|
||||||
|
*
|
||||||
|
* Configuration settings for the Freescale i.MX6Q SabreSD board.
|
||||||
|
*
|
||||||
|
* SPDX-License-Identifier: GPL-2.0+
|
||||||
|
*/
|
||||||
|
#ifndef __ARISTAINETOS_CONFIG_H
|
||||||
|
#define __ARISTAINETOS_CONFIG_H
|
||||||
|
|
||||||
|
#define CONFIG_MX6
|
||||||
|
|
||||||
|
#include "mx6_common.h"
|
||||||
|
#include <linux/sizes.h>
|
||||||
|
|
||||||
|
#define CONFIG_DISPLAY_CPUINFO
|
||||||
|
#define CONFIG_DISPLAY_BOARDINFO
|
||||||
|
|
||||||
|
#include <asm/arch/imx-regs.h>
|
||||||
|
#include <asm/imx-common/gpio.h>
|
||||||
|
|
||||||
|
#define CONFIG_MACH_TYPE 4501
|
||||||
|
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
|
||||||
|
#define CONFIG_DEFAULT_FDT_FILE "aristainetos.dtb"
|
||||||
|
#define CONFIG_HOSTNAME aristainetos
|
||||||
|
#define PHYS_SDRAM_SIZE (1u * 1024 * 1024 * 1024)
|
||||||
|
|
||||||
|
#define CONFIG_SYS_GENERIC_BOARD
|
||||||
|
|
||||||
|
/* Size of malloc() pool */
|
||||||
|
#define CONFIG_SYS_MALLOC_LEN (64 * SZ_1M)
|
||||||
|
|
||||||
|
#define CONFIG_BOARD_EARLY_INIT_F
|
||||||
|
#define CONFIG_MXC_GPIO
|
||||||
|
|
||||||
|
#define CONFIG_MXC_UART
|
||||||
|
#define CONFIG_MXC_UART_BASE UART5_BASE
|
||||||
|
#define CONFIG_CONSOLE_DEV "ttymxc4"
|
||||||
|
|
||||||
|
#define CONFIG_CMD_FUSE
|
||||||
|
#define CONFIG_MXC_OCOTP
|
||||||
|
|
||||||
|
/* MMC Configs */
|
||||||
|
#define CONFIG_FSL_ESDHC
|
||||||
|
#define CONFIG_FSL_USDHC
|
||||||
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
||||||
|
|
||||||
|
#define CONFIG_MMC
|
||||||
|
#define CONFIG_CMD_MMC
|
||||||
|
#define CONFIG_GENERIC_MMC
|
||||||
|
#define CONFIG_BOUNCE_BUFFER
|
||||||
|
#define CONFIG_CMD_EXT2
|
||||||
|
#define CONFIG_CMD_FAT
|
||||||
|
#define CONFIG_DOS_PARTITION
|
||||||
|
|
||||||
|
#define CONFIG_CMD_PING
|
||||||
|
#define CONFIG_CMD_DHCP
|
||||||
|
#define CONFIG_CMD_MII
|
||||||
|
#define CONFIG_CMD_NET
|
||||||
|
#define CONFIG_FEC_MXC
|
||||||
|
#define CONFIG_MII
|
||||||
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
||||||
|
#define CONFIG_FEC_XCV_TYPE RMII
|
||||||
|
#define CONFIG_ETHPRIME "FEC"
|
||||||
|
#define CONFIG_FEC_MXC_PHYADDR 0
|
||||||
|
|
||||||
|
#define CONFIG_PHYLIB
|
||||||
|
#define CONFIG_PHY_MICREL
|
||||||
|
|
||||||
|
#define CONFIG_CMD_SF
|
||||||
|
#define CONFIG_SPI_FLASH
|
||||||
|
#define CONFIG_SPI_FLASH_MTD
|
||||||
|
#define CONFIG_SPI_FLASH_STMICRO
|
||||||
|
#define CONFIG_MXC_SPI
|
||||||
|
#define CONFIG_SF_DEFAULT_BUS 3
|
||||||
|
#define CONFIG_SF_DEFAULT_CS (0|(IMX_GPIO_NR(3, 20)<<8))
|
||||||
|
#define CONFIG_SF_DEFAULT_SPEED 20000000
|
||||||
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
|
||||||
|
#define CONFIG_SYS_SPI_ST_ENABLE_WP_PIN
|
||||||
|
|
||||||
|
/* allow to overwrite serial and ethaddr */
|
||||||
|
#define CONFIG_ENV_OVERWRITE
|
||||||
|
#define CONFIG_CONS_INDEX 1
|
||||||
|
#define CONFIG_BAUDRATE 115200
|
||||||
|
|
||||||
|
/* Command definition */
|
||||||
|
#include <config_cmd_default.h>
|
||||||
|
|
||||||
|
#define CONFIG_CMD_BMODE
|
||||||
|
#define CONFIG_CMD_BOOTZ
|
||||||
|
#define CONFIG_CMD_SETEXPR
|
||||||
|
#undef CONFIG_CMD_IMLS
|
||||||
|
|
||||||
|
#define CONFIG_BOOTDELAY 3
|
||||||
|
|
||||||
|
#define CONFIG_LOADADDR 0x12000000
|
||||||
|
#define CONFIG_SYS_TEXT_BASE 0x17800000
|
||||||
|
|
||||||
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
||||||
|
"uimage=uImage\0" \
|
||||||
|
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
||||||
|
"fdt_addr_r=0x11000000\0" \
|
||||||
|
"kernel_addr_r=0x12000000\0" \
|
||||||
|
"kernel_file=uImage\0" \
|
||||||
|
"boot_fdt=try\0" \
|
||||||
|
"ip_dyn=yes\0" \
|
||||||
|
"console=" CONFIG_CONSOLE_DEV "\0" \
|
||||||
|
"fdt_high=0xffffffff\0" \
|
||||||
|
"initrd_high=0xffffffff\0" \
|
||||||
|
"mmcpart=1\0" \
|
||||||
|
"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
|
||||||
|
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
|
||||||
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
||||||
|
"root=${mmcroot}\0" \
|
||||||
|
"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${kernel_addr_r} " \
|
||||||
|
"${uimage}\0" \
|
||||||
|
"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} " \
|
||||||
|
"${fdt_file}\0" \
|
||||||
|
"mmcboot=echo Booting from mmc ...; " \
|
||||||
|
"run mmcargs;run loadimage loadfdt fdt_setup;" \
|
||||||
|
"bootm ${kernel_addr_r} - ${fdt_addr_r};\0" \
|
||||||
|
"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-sato-sdk\0" \
|
||||||
|
"nfsopts=nfsvers=3 nolock rw\0" \
|
||||||
|
"netdev=eth0\0" \
|
||||||
|
"fdt_setup=fdt addr ${fdt_addr_r};fdt resize;fdt chosen;fdt board\0"\
|
||||||
|
"load_fdt=tftp ${fdt_addr_r} ${fdt_file}\0" \
|
||||||
|
"load_kernel=tftp ${kernel_addr_r} ${kernel_file}\0" \
|
||||||
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
||||||
|
"get_env=mw ${loadaddr} 0x00000000 0x20000;" \
|
||||||
|
"tftp ${loadaddr} /tftpboot/aristainetos/env.txt;" \
|
||||||
|
"env import -t ${loadaddr}\0" \
|
||||||
|
"addmisc=setenv bootargs ${bootargs} maxcpus=1 loglevel=8\0" \
|
||||||
|
"bootargs_defaults=setenv bootargs ${console} ${mtdoops} " \
|
||||||
|
"${optargs}\0" \
|
||||||
|
"net_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
|
||||||
|
"root=/dev/nfs nfsroot=${serverip}:${rootpath},${nfsopts} " \
|
||||||
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
||||||
|
"${hostname}:${netdev}:off\0" \
|
||||||
|
"net_nfs=run load_kernel load_fdt;run net_args addmtd addmisc;" \
|
||||||
|
"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||||
|
"uboot=/tftpboot/aristainetos/u-boot.imx\0" \
|
||||||
|
"load_uboot=tftp ${loadaddr} ${uboot}\0" \
|
||||||
|
"uboot_sz=c0000\0" \
|
||||||
|
"upd_uboot=mw.b ${loadaddr} 0xff ${uboot_sz};" \
|
||||||
|
"mw.b 10200000 0x00 ${uboot_sz};" \
|
||||||
|
"run load_uboot;sf probe;sf erase 0 ${uboot_sz};" \
|
||||||
|
"sf write ${loadaddr} 400 ${filesize};" \
|
||||||
|
"sf read 10200000 400 ${uboot_sz};" \
|
||||||
|
"cmp.b ${loadaddr} 10200000 bc000\0" \
|
||||||
|
"ubi_prep=ubi part ubi 2048;ubifsmount ubi:kernel\0" \
|
||||||
|
"load_kernel_ubi=ubifsload ${kernel_addr_r} uImage\0" \
|
||||||
|
"load_fdt_ubi=ubifsload ${fdt_addr_r} aristainetos.dtb\0" \
|
||||||
|
"ubi_nfs=run ubiprep load_kernel_ubi load_fdt_ubi;" \
|
||||||
|
"run net_args addmtd addmisc;run fdt_setup;" \
|
||||||
|
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||||
|
"rootfsname=rootfs\0" \
|
||||||
|
"ubi_args=run bootargs_defaults;setenv bootargs ${bootargs} " \
|
||||||
|
"ubi.mtd=0,2048 root=ubi0:${rootfsname} rootfstype=ubifs " \
|
||||||
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
||||||
|
"${hostname}:${netdev}:off\0" \
|
||||||
|
"ubi_ubi=run ubi_prep load_kernel_ubi load_fdt_ubi;" \
|
||||||
|
"run bootargs_defaults ubi_args addmtd addmisc;" \
|
||||||
|
"run fdt_setup;bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
||||||
|
"ubirootfs_file=/tftpboot/aristainetos/rootfs-minimal.ubifs\0" \
|
||||||
|
"upd_ubirootfs=run ubi_prep;tftp ${loadaddr} ${ubirootfs_file};" \
|
||||||
|
"ubi write ${loadaddr} rootfs ${filesize}\0" \
|
||||||
|
"ksz=800000\0" \
|
||||||
|
"rootsz=2000000\0" \
|
||||||
|
"usersz=8000000\0" \
|
||||||
|
"ubi_make=run ubi_prep;ubi create kernel ${ksz};" \
|
||||||
|
"ubi create rootfs ${rootsz};ubi create userfs ${usersz}\0"
|
||||||
|
|
||||||
|
#define CONFIG_BOOTCOMMAND \
|
||||||
|
"mmc dev ${mmcdev};" \
|
||||||
|
"if mmc rescan; then " \
|
||||||
|
"run mmcboot;" \
|
||||||
|
"else run ubi_ubi; fi"
|
||||||
|
|
||||||
|
#define CONFIG_ARP_TIMEOUT 200UL
|
||||||
|
|
||||||
|
/* Miscellaneous configurable options */
|
||||||
|
#define CONFIG_SYS_LONGHELP
|
||||||
|
#define CONFIG_SYS_HUSH_PARSER
|
||||||
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
||||||
|
#define CONFIG_AUTO_COMPLETE
|
||||||
|
#define CONFIG_SYS_CBSIZE 256
|
||||||
|
|
||||||
|
/* Print Buffer Size */
|
||||||
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
|
||||||
|
#define CONFIG_SYS_MAXARGS 16
|
||||||
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
||||||
|
|
||||||
|
#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
|
||||||
|
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x100000)
|
||||||
|
#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
|
||||||
|
|
||||||
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
||||||
|
|
||||||
|
#define CONFIG_CMDLINE_EDITING
|
||||||
|
#define CONFIG_STACKSIZE (128 * 1024)
|
||||||
|
|
||||||
|
/* Physical Memory Map */
|
||||||
|
#define CONFIG_NR_DRAM_BANKS 1
|
||||||
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
||||||
|
|
||||||
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
||||||
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
||||||
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
||||||
|
|
||||||
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
||||||
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
||||||
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
||||||
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
||||||
|
|
||||||
|
/* FLASH and environment organization */
|
||||||
|
#define CONFIG_SYS_NO_FLASH
|
||||||
|
|
||||||
|
#define CONFIG_ENV_SIZE (12 * 1024)
|
||||||
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
||||||
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
||||||
|
#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
|
||||||
|
#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
|
||||||
|
#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
|
||||||
|
#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
|
||||||
|
#define CONFIG_ENV_SECT_SIZE (0x010000)
|
||||||
|
#define CONFIG_ENV_OFFSET (0x0c0000)
|
||||||
|
#define CONFIG_ENV_OFFSET_REDUND (0x0d0000)
|
||||||
|
|
||||||
|
#define CONFIG_OF_LIBFDT
|
||||||
|
|
||||||
|
#define CONFIG_CMD_CACHE
|
||||||
|
|
||||||
|
#define CONFIG_SYS_FSL_USDHC_NUM 2
|
||||||
|
|
||||||
|
#define CONFIG_CMD_I2C
|
||||||
|
#define CONFIG_SYS_I2C
|
||||||
|
#define CONFIG_SYS_I2C_MXC
|
||||||
|
#define CONFIG_SYS_I2C_SPEED 100000
|
||||||
|
#define CONFIG_SYS_I2C_SLAVE 0x7f
|
||||||
|
#define CONFIG_SYS_I2C_NOPROBES { {0, 0x00} }
|
||||||
|
|
||||||
|
#define CONFIG_CMD_GPIO
|
||||||
|
#define CONFIG_GPIO_ENABLE_SPI_FLASH IMX_GPIO_NR(2, 15)
|
||||||
|
|
||||||
|
/* NAND stuff */
|
||||||
|
#define CONFIG_CMD_NAND
|
||||||
|
#define CONFIG_CMD_NAND_TRIMFFS
|
||||||
|
#define CONFIG_NAND_MXS
|
||||||
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
||||||
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
||||||
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
||||||
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
||||||
|
|
||||||
|
/* DMA stuff, needed for GPMI/MXS NAND support */
|
||||||
|
#define CONFIG_APBH_DMA
|
||||||
|
#define CONFIG_APBH_DMA_BURST
|
||||||
|
#define CONFIG_APBH_DMA_BURST8
|
||||||
|
|
||||||
|
/* RTC */
|
||||||
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
||||||
|
#define CONFIG_SYS_RTC_BUS_NUM 2
|
||||||
|
#define CONFIG_RTC_M41T11
|
||||||
|
#define CONFIG_CMD_DATE
|
||||||
|
|
||||||
|
/* USB Configs */
|
||||||
|
#define CONFIG_CMD_USB
|
||||||
|
#define CONFIG_CMD_FAT
|
||||||
|
#define CONFIG_USB_EHCI
|
||||||
|
#define CONFIG_USB_EHCI_MX6
|
||||||
|
#define CONFIG_USB_STORAGE
|
||||||
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
||||||
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
||||||
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
||||||
|
#define CONFIG_MXC_USB_FLAGS 0
|
||||||
|
|
||||||
|
#define ARISTAINETOS_USB_OTG_PWR IMX_GPIO_NR(4, 15)
|
||||||
|
#define ARISTAINETOS_USB_H1_PWR IMX_GPIO_NR(3, 31)
|
||||||
|
|
||||||
|
/* UBI support */
|
||||||
|
#define CONFIG_CMD_MTDPARTS
|
||||||
|
#define CONFIG_MTD_PARTITIONS
|
||||||
|
#define CONFIG_MTD_DEVICE
|
||||||
|
#define CONFIG_RBTREE
|
||||||
|
#define CONFIG_LZO
|
||||||
|
#define CONFIG_CMD_UBI
|
||||||
|
#define CONFIG_CMD_UBIFS
|
||||||
|
|
||||||
|
#define MTDIDS_DEFAULT "nand0=gpmi-nand"
|
||||||
|
#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:-(ubi)"
|
||||||
|
|
||||||
|
#define CONFIG_MTD_UBI_FASTMAP
|
||||||
|
#define CONFIG_MTD_UBI_FASTMAP_AUTOCONVERT 1
|
||||||
|
|
||||||
|
#define CONFIG_HW_WATCHDOG
|
||||||
|
#define CONFIG_IMX_WATCHDOG
|
||||||
|
|
||||||
|
#define CONFIG_FIT
|
||||||
|
|
||||||
|
/* Framebuffer */
|
||||||
|
#define CONFIG_VIDEO
|
||||||
|
#define CONFIG_VIDEO_IPUV3
|
||||||
|
/* check this console not needed, after test remove it */
|
||||||
|
#define CONFIG_CFB_CONSOLE
|
||||||
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
||||||
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
||||||
|
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
||||||
|
#define CONFIG_VIDEO_BMP_RLE8
|
||||||
|
#define CONFIG_SPLASH_SCREEN
|
||||||
|
#define CONFIG_SPLASH_SCREEN_ALIGN
|
||||||
|
#define CONFIG_BMP_16BPP
|
||||||
|
#define CONFIG_VIDEO_LOGO
|
||||||
|
#define CONFIG_VIDEO_BMP_LOGO
|
||||||
|
#define CONFIG_IPUV3_CLK 198000000
|
||||||
|
#define CONFIG_IMX_VIDEO_SKIP
|
||||||
|
|
||||||
|
#define CONFIG_CMD_BMP
|
||||||
|
|
||||||
|
#define CONFIG_PWM_IMX
|
||||||
|
#define CONFIG_IMX6_PWM_PER_CLK 66000000
|
||||||
|
|
||||||
|
#endif /* __ARISTAINETOS_CONFIG_H */
|
||||||
Loading…
Reference in New Issue