mx1ads: remove board support
Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net> Acked-by: Stefano Babic <sbabic@denx.de>
This commit is contained in:
Albert ARIBAUD
parent
af5b9b1f78
commit
e570aca947
|
|
@ -1,16 +0,0 @@
|
|||
#
|
||||
# board/mx1ads/Makefile
|
||||
#
|
||||
# (C) Copyright 2006
|
||||
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
||||
#
|
||||
# (c) Copyright 2004
|
||||
# Techware Information Technology, Inc.
|
||||
# http://www.techware.com.tw/
|
||||
#
|
||||
# Ming-Len Wu <minglen_wu@techware.com.tw>
|
||||
#
|
||||
# SPDX-License-Identifier: GPL-2.0+
|
||||
|
||||
obj-y := mx1ads.o syncflash.o
|
||||
obj-y += lowlevel_init.o
|
||||
|
|
@ -1,68 +0,0 @@
|
|||
/*
|
||||
* board/mx1ads/lowlevel_init.S
|
||||
*
|
||||
* (c) Copyright 2004
|
||||
* Techware Information Technology, Inc.
|
||||
* http://www.techware.com.tw/
|
||||
*
|
||||
* Ming-Len Wu <minglen_wu@techware.com.tw>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <config.h>
|
||||
#include <version.h>
|
||||
|
||||
#define SDCTL0 0x221000
|
||||
#define SDCTL1 0x221004
|
||||
|
||||
|
||||
_TEXT_BASE:
|
||||
.word CONFIG_SYS_TEXT_BASE
|
||||
|
||||
.globl lowlevel_init
|
||||
lowlevel_init:
|
||||
/* memory controller init */
|
||||
|
||||
ldr r1, =SDCTL0
|
||||
|
||||
/* Set Precharge Command */
|
||||
|
||||
ldr r3, =0x92120200
|
||||
/* ldr r3, =0x92120251
|
||||
*/
|
||||
str r3, [r1]
|
||||
|
||||
/* Issue Precharge All Commad */
|
||||
ldr r3, =0x8200000
|
||||
ldr r2, [r3]
|
||||
|
||||
/* Set AutoRefresh Command */
|
||||
ldr r3, =0xA2120200
|
||||
str r3, [r1]
|
||||
|
||||
/* Issue AutoRefresh Command */
|
||||
ldr r3, =0x8000000
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
ldr r2, [r3]
|
||||
|
||||
/* Set Mode Register */
|
||||
ldr r3, =0xB2120200
|
||||
str r3, [r1]
|
||||
|
||||
/* Issue Mode Register Command */
|
||||
ldr r3, =0x08111800 /* Mode Register Value */
|
||||
ldr r2, [r3]
|
||||
|
||||
/* Set Normal Mode */
|
||||
ldr r3, =0x82124200
|
||||
str r3, [r1]
|
||||
|
||||
/* everything is fine now */
|
||||
mov pc, lr
|
||||
|
|
@ -1,178 +0,0 @@
|
|||
/*
|
||||
* board/mx1ads/mx1ads.c
|
||||
*
|
||||
* (c) Copyright 2004
|
||||
* Techware Information Technology, Inc.
|
||||
* http://www.techware.com.tw/
|
||||
*
|
||||
* Ming-Len Wu <minglen_wu@techware.com.tw>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
#include <netdev.h>
|
||||
/*#include <mc9328.h>*/
|
||||
#include <asm/arch/imx-regs.h>
|
||||
#include <asm/io.h>
|
||||
|
||||
DECLARE_GLOBAL_DATA_PTR;
|
||||
|
||||
#define FCLK_SPEED 1
|
||||
|
||||
#if FCLK_SPEED==0 /* Fout = 203MHz, Fin = 12MHz for Audio */
|
||||
#define M_MDIV 0xC3
|
||||
#define M_PDIV 0x4
|
||||
#define M_SDIV 0x1
|
||||
#elif FCLK_SPEED==1 /* Fout = 202.8MHz */
|
||||
#define M_MDIV 0xA1
|
||||
#define M_PDIV 0x3
|
||||
#define M_SDIV 0x1
|
||||
#endif
|
||||
|
||||
#define USB_CLOCK 1
|
||||
|
||||
#if USB_CLOCK==0
|
||||
#define U_M_MDIV 0xA1
|
||||
#define U_M_PDIV 0x3
|
||||
#define U_M_SDIV 0x1
|
||||
#elif USB_CLOCK==1
|
||||
#define U_M_MDIV 0x48
|
||||
#define U_M_PDIV 0x3
|
||||
#define U_M_SDIV 0x2
|
||||
#endif
|
||||
|
||||
#if 0
|
||||
|
||||
static inline void delay (unsigned long loops)
|
||||
{
|
||||
__asm__ volatile ("1:\n"
|
||||
"subs %0, %1, #1\n"
|
||||
"bne 1b":"=r" (loops):"0" (loops));
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Miscellaneous platform dependent initialisations
|
||||
*/
|
||||
|
||||
void SetAsynchMode (void)
|
||||
{
|
||||
__asm__ ("mrc p15,0,r0,c1,c0,0 \n"
|
||||
"mov r2, #0xC0000000 \n"
|
||||
"orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n");
|
||||
}
|
||||
|
||||
static u32 mc9328sid;
|
||||
|
||||
int board_early_init_f(void)
|
||||
{
|
||||
mc9328sid = SIDR;
|
||||
|
||||
GPCR = 0x000003AB; /* I/O pad driving strength */
|
||||
|
||||
/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */
|
||||
/* MX1_CS1L = 0x11110601; */
|
||||
|
||||
MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */
|
||||
|
||||
/* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and
|
||||
* BCLK divider to 2 (i.e. BCLK to 48 MHz)
|
||||
*/
|
||||
CSCR = 0xAF000403;
|
||||
|
||||
CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */
|
||||
CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */
|
||||
|
||||
/* setup cs4 for cs8900 ethernet */
|
||||
|
||||
CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */
|
||||
CS4L = 0x00001501;
|
||||
|
||||
GIUS (0) &= 0xFF3FFFFF;
|
||||
GPR (0) &= 0xFF3FFFFF;
|
||||
|
||||
readl(0x1500000C);
|
||||
readl(0x1500000C);
|
||||
|
||||
SetAsynchMode ();
|
||||
|
||||
icache_enable ();
|
||||
dcache_enable ();
|
||||
|
||||
/* set PERCLKs */
|
||||
PCDR = 0x00000055; /* set PERCLKS */
|
||||
|
||||
/* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes
|
||||
* PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place
|
||||
* all sources selected as normal interrupt
|
||||
*/
|
||||
|
||||
/* MX1_INTTYPEH = 0;
|
||||
MX1_INTTYPEL = 0;
|
||||
*/
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_init(void)
|
||||
{
|
||||
gd->bd->bi_arch_number = MACH_TYPE_MX1ADS;
|
||||
|
||||
gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
int board_late_init (void)
|
||||
{
|
||||
|
||||
setenv ("stdout", "serial");
|
||||
setenv ("stderr", "serial");
|
||||
|
||||
switch (mc9328sid) {
|
||||
case 0x0005901d:
|
||||
printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",
|
||||
mc9328sid);
|
||||
break;
|
||||
case 0x04d4c01d:
|
||||
printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",
|
||||
mc9328sid);
|
||||
break;
|
||||
case 0x00d4c01d:
|
||||
printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",
|
||||
mc9328sid);
|
||||
break;
|
||||
|
||||
default:
|
||||
printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",
|
||||
mc9328sid);
|
||||
break;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
int dram_init(void)
|
||||
{
|
||||
/* dram_init must store complete ramsize in gd->ram_size */
|
||||
gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1,
|
||||
PHYS_SDRAM_1_SIZE);
|
||||
return 0;
|
||||
}
|
||||
|
||||
void dram_init_banksize(void)
|
||||
{
|
||||
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
||||
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_CMD_NET
|
||||
int board_eth_init(bd_t *bis)
|
||||
{
|
||||
int rc = 0;
|
||||
#ifdef CONFIG_CS8900
|
||||
rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
|
||||
#endif
|
||||
return rc;
|
||||
}
|
||||
#endif
|
||||
|
|
@ -1,307 +0,0 @@
|
|||
/*
|
||||
* board/mx1ads/syncflash.c
|
||||
*
|
||||
* (c) Copyright 2004
|
||||
* Techware Information Technology, Inc.
|
||||
* http://www.techware.com.tw/
|
||||
*
|
||||
* Ming-Len Wu <minglen_wu@techware.com.tw>
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#include <common.h>
|
||||
/*#include <mc9328.h>*/
|
||||
#include <asm/arch/imx-regs.h>
|
||||
|
||||
typedef unsigned long * p_u32;
|
||||
|
||||
/* 4Mx16x2 IAM=0 CSD1 */
|
||||
|
||||
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
||||
|
||||
/* Following Setting is for CSD1 */
|
||||
#define SFCTL 0x00221004
|
||||
#define reg_SFCTL __REG(SFCTL)
|
||||
|
||||
#define SYNCFLASH_A10 (0x00100000)
|
||||
|
||||
#define CMD_NORMAL (0x81020300) /* Normal Mode */
|
||||
#define CMD_PREC (CMD_NORMAL + 0x10000000) /* Precharge Command */
|
||||
#define CMD_AUTO (CMD_NORMAL + 0x20000000) /* Auto Refresh Command */
|
||||
#define CMD_LMR (CMD_NORMAL + 0x30000000) /* Load Mode Register Command */
|
||||
#define CMD_LCR (CMD_NORMAL + 0x60000000) /* LCR Command */
|
||||
#define CMD_PROGRAM (CMD_NORMAL + 0x70000000)
|
||||
|
||||
#define MODE_REG_VAL (CONFIG_SYS_FLASH_BASE+0x0008CC00) /* Cas Latency 3 */
|
||||
|
||||
/* LCR Command */
|
||||
#define LCR_READSTATUS (0x0001C000) /* 0x70 */
|
||||
#define LCR_ERASE_CONFIRM (0x00008000) /* 0x20 */
|
||||
#define LCR_ERASE_NVMODE (0x0000C000) /* 0x30 */
|
||||
#define LCR_PROG_NVMODE (0x00028000) /* 0xA0 */
|
||||
#define LCR_SR_CLEAR (0x00014000) /* 0x50 */
|
||||
|
||||
/* Get Status register */
|
||||
u32 SF_SR(void) {
|
||||
u32 tmp;
|
||||
|
||||
reg_SFCTL = CMD_PROGRAM;
|
||||
tmp = __REG(CONFIG_SYS_FLASH_BASE);
|
||||
|
||||
reg_SFCTL = CMD_NORMAL;
|
||||
|
||||
reg_SFCTL = CMD_LCR; /* Activate LCR Mode */
|
||||
__REG(CONFIG_SYS_FLASH_BASE + LCR_SR_CLEAR);
|
||||
|
||||
return tmp;
|
||||
}
|
||||
|
||||
/* check if SyncFlash is ready */
|
||||
u8 SF_Ready(void) {
|
||||
u32 tmp;
|
||||
|
||||
tmp = SF_SR();
|
||||
|
||||
if ((tmp & 0x00800000) && (tmp & 0x001C0000)) {
|
||||
printf ("SyncFlash Error code %08x\n",tmp);
|
||||
};
|
||||
|
||||
if ((tmp & 0x00000080) && (tmp & 0x0000001C)) {
|
||||
printf ("SyncFlash Error code %08x\n",tmp);
|
||||
};
|
||||
|
||||
if (tmp == 0x00800080) /* Test Bit 7 of SR */
|
||||
return 1;
|
||||
else
|
||||
return 0;
|
||||
}
|
||||
|
||||
/* Issue the precharge all command */
|
||||
void SF_PrechargeAll(void) {
|
||||
|
||||
/* Set Precharge Command */
|
||||
reg_SFCTL = CMD_PREC;
|
||||
/* Issue Precharge All Command */
|
||||
__REG(CONFIG_SYS_FLASH_BASE + SYNCFLASH_A10);
|
||||
}
|
||||
|
||||
/* set SyncFlash to normal mode */
|
||||
void SF_Normal(void) {
|
||||
|
||||
SF_PrechargeAll();
|
||||
|
||||
reg_SFCTL = CMD_NORMAL;
|
||||
}
|
||||
|
||||
/* Erase SyncFlash */
|
||||
void SF_Erase(u32 RowAddress) {
|
||||
|
||||
reg_SFCTL = CMD_NORMAL;
|
||||
__REG(RowAddress);
|
||||
|
||||
reg_SFCTL = CMD_PREC;
|
||||
__REG(RowAddress);
|
||||
|
||||
reg_SFCTL = CMD_LCR; /* Set LCR mode */
|
||||
__REG(RowAddress + LCR_ERASE_CONFIRM) = 0; /* Issue Erase Setup Command */
|
||||
|
||||
reg_SFCTL = CMD_NORMAL; /* return to Normal mode */
|
||||
__REG(RowAddress) = 0xD0D0D0D0; /* Confirm */
|
||||
|
||||
while(!SF_Ready());
|
||||
}
|
||||
|
||||
void SF_NvmodeErase(void) {
|
||||
SF_PrechargeAll();
|
||||
|
||||
reg_SFCTL = CMD_LCR; /* Set to LCR mode */
|
||||
__REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0; /* Issue Erase Nvmode Reg Command */
|
||||
|
||||
reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
|
||||
__REG(CONFIG_SYS_FLASH_BASE + LCR_ERASE_NVMODE) = 0xC0C0C0C0; /* Confirm */
|
||||
|
||||
while(!SF_Ready());
|
||||
}
|
||||
|
||||
void SF_NvmodeWrite(void) {
|
||||
SF_PrechargeAll();
|
||||
|
||||
reg_SFCTL = CMD_LCR; /* Set to LCR mode */
|
||||
__REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0; /* Issue Program Nvmode reg command */
|
||||
|
||||
reg_SFCTL = CMD_NORMAL; /* Return to Normal mode */
|
||||
__REG(CONFIG_SYS_FLASH_BASE+LCR_PROG_NVMODE) = 0xC0C0C0C0; /* Confirm not needed */
|
||||
}
|
||||
|
||||
/****************************************************************************************/
|
||||
|
||||
ulong flash_init(void) {
|
||||
int i, j;
|
||||
|
||||
/* Turn on CSD1 for negating RESETSF of SyncFLash */
|
||||
|
||||
reg_SFCTL |= 0x80000000; /* enable CSD1 for SyncFlash */
|
||||
udelay(200);
|
||||
|
||||
reg_SFCTL = CMD_LMR; /* Set Load Mode Register Command */
|
||||
__REG(MODE_REG_VAL); /* Issue Load Mode Register Command */
|
||||
|
||||
SF_Normal();
|
||||
|
||||
i = 0;
|
||||
|
||||
flash_info[i].flash_id = FLASH_MAN_MT | FLASH_MT28S4M16LC;
|
||||
|
||||
flash_info[i].size = FLASH_BANK_SIZE;
|
||||
flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
|
||||
|
||||
memset(flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
|
||||
|
||||
for (j = 0; j < flash_info[i].sector_count; j++) {
|
||||
flash_info[i].start[j] = CONFIG_SYS_FLASH_BASE + j * 0x00100000;
|
||||
}
|
||||
|
||||
flash_protect(FLAG_PROTECT_SET,
|
||||
CONFIG_SYS_FLASH_BASE,
|
||||
CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
|
||||
&flash_info[0]);
|
||||
|
||||
flash_protect(FLAG_PROTECT_SET,
|
||||
CONFIG_ENV_ADDR,
|
||||
CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
|
||||
&flash_info[0]);
|
||||
|
||||
return FLASH_BANK_SIZE;
|
||||
}
|
||||
|
||||
void flash_print_info (flash_info_t *info) {
|
||||
|
||||
int i;
|
||||
|
||||
switch (info->flash_id & FLASH_VENDMASK) {
|
||||
case (FLASH_MAN_MT & FLASH_VENDMASK):
|
||||
printf("Micron: ");
|
||||
break;
|
||||
default:
|
||||
printf("Unknown Vendor ");
|
||||
break;
|
||||
}
|
||||
|
||||
switch (info->flash_id & FLASH_TYPEMASK) {
|
||||
case (FLASH_MT28S4M16LC & FLASH_TYPEMASK):
|
||||
printf("2x FLASH_MT28S4M16LC (16MB Total)\n");
|
||||
break;
|
||||
default:
|
||||
printf("Unknown Chip Type\n");
|
||||
return;
|
||||
break;
|
||||
}
|
||||
|
||||
printf(" Size: %ld MB in %d Sectors\n",
|
||||
info->size >> 20, info->sector_count);
|
||||
|
||||
printf(" Sector Start Addresses: ");
|
||||
|
||||
for (i = 0; i < info->sector_count; i++) {
|
||||
if ((i % 5) == 0)
|
||||
printf ("\n ");
|
||||
|
||||
printf (" %08lX%s", info->start[i],
|
||||
info->protect[i] ? " (RO)" : " ");
|
||||
}
|
||||
|
||||
printf ("\n");
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------*/
|
||||
|
||||
int flash_erase (flash_info_t *info, int s_first, int s_last) {
|
||||
int iflag, cflag, prot, sect;
|
||||
int rc = ERR_OK;
|
||||
|
||||
/* first look for protection bits */
|
||||
|
||||
if (info->flash_id == FLASH_UNKNOWN)
|
||||
return ERR_UNKNOWN_FLASH_TYPE;
|
||||
|
||||
if ((s_first < 0) || (s_first > s_last))
|
||||
return ERR_INVAL;
|
||||
|
||||
if ((info->flash_id & FLASH_VENDMASK) != (FLASH_MAN_MT & FLASH_VENDMASK))
|
||||
return ERR_UNKNOWN_FLASH_VENDOR;
|
||||
|
||||
prot = 0;
|
||||
|
||||
for (sect = s_first; sect <= s_last; ++sect) {
|
||||
if (info->protect[sect])
|
||||
prot++;
|
||||
}
|
||||
|
||||
if (prot) {
|
||||
printf("protected!\n");
|
||||
return ERR_PROTECTED;
|
||||
}
|
||||
/*
|
||||
* Disable interrupts which might cause a timeout
|
||||
* here. Remember that our exception vectors are
|
||||
* at address 0 in the flash, and we don't want a
|
||||
* (ticker) exception to happen while the flash
|
||||
* chip is in programming mode.
|
||||
*/
|
||||
|
||||
cflag = icache_status();
|
||||
icache_disable();
|
||||
iflag = disable_interrupts();
|
||||
|
||||
/* Start erase on unprotected sectors */
|
||||
for (sect = s_first; sect <= s_last && !ctrlc(); sect++) {
|
||||
|
||||
printf("Erasing sector %2d ... ", sect);
|
||||
|
||||
/* arm simple, non interrupt dependent timer */
|
||||
|
||||
get_timer(0);
|
||||
|
||||
SF_NvmodeErase();
|
||||
SF_NvmodeWrite();
|
||||
|
||||
SF_Erase(CONFIG_SYS_FLASH_BASE + (0x0100000 * sect));
|
||||
SF_Normal();
|
||||
|
||||
printf("ok.\n");
|
||||
}
|
||||
|
||||
if (ctrlc())
|
||||
printf("User Interrupt!\n");
|
||||
|
||||
if (iflag)
|
||||
enable_interrupts();
|
||||
|
||||
if (cflag)
|
||||
icache_enable();
|
||||
|
||||
return rc;
|
||||
}
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Copy memory to flash.
|
||||
*/
|
||||
|
||||
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) {
|
||||
int i;
|
||||
|
||||
for(i = 0; i < cnt; i += 4) {
|
||||
|
||||
SF_PrechargeAll();
|
||||
|
||||
reg_SFCTL = CMD_PROGRAM; /* Enter SyncFlash Program mode */
|
||||
__REG(addr + i) = __REG((u32)src + i);
|
||||
|
||||
while(!SF_Ready());
|
||||
}
|
||||
|
||||
SF_Normal();
|
||||
|
||||
return ERR_OK;
|
||||
}
|
||||
|
|
@ -65,7 +65,6 @@ Active arm arm920t at91 BuS eb_cpux9k2
|
|||
Active arm arm920t at91 BuS eb_cpux9k2 eb_cpux9k2_ram eb_cpux9k2:RAMBOOT Jens Scharsig <esw@bus-elektronik.de>
|
||||
Active arm arm920t at91 eukrea cpuat91 cpuat91 cpuat91 Eric Benard <eric@eukrea.com>
|
||||
Active arm arm920t at91 eukrea cpuat91 cpuat91_ram cpuat91:RAMBOOT Eric Benard <eric@eukrea.com>
|
||||
Active arm arm920t imx - - mx1ads - -
|
||||
Active arm arm920t imx - - scb9328 - Torsten Koschorrek <koschorrek@synertronixx.de>
|
||||
Active arm arm920t ks8695 - - cm4008 - Greg Ungerer <greg.ungerer@opengear.com>
|
||||
Active arm arm920t ks8695 - - cm41xx - -
|
||||
|
|
|
|||
|
|
@ -11,6 +11,7 @@ easily if here is something they might want to dig for...
|
|||
|
||||
Board Arch CPU Commit Removed Last known maintainer/contact
|
||||
=================================================================================================
|
||||
mx1ads arm arm920t - 2014-01-13
|
||||
mini2440 arm arm920t - 2014-01-13 Gabriel Huau <contact@huau-gabriel.fr>
|
||||
omap730p2 arm arm926ejs 79c5c08d 2013-11-11
|
||||
pn62 powerpc mpc824x 649acfe1 2013-11-11 Wolfgang Grandegger <wg@grandegger.com>
|
||||
|
|
|
|||
|
|
@ -1,163 +0,0 @@
|
|||
/*
|
||||
* include/configs/mx1ads.h
|
||||
*
|
||||
* (c) Copyright 2004
|
||||
* Techware Information Technology, Inc.
|
||||
* http://www.techware.com.tw/
|
||||
*
|
||||
* Ming-Len Wu <minglen_wu@techware.com.tw>
|
||||
*
|
||||
* This is the Configuration setting for Motorola MX1ADS board
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0+
|
||||
*/
|
||||
|
||||
#ifndef __CONFIG_H
|
||||
#define __CONFIG_H
|
||||
|
||||
/*
|
||||
* High Level Configuration Options
|
||||
* (easy to change)
|
||||
*/
|
||||
#define CONFIG_ARM920T 1 /* This is an ARM920T Core */
|
||||
#define CONFIG_IMX 1 /* It's a Motorola MC9328 SoC */
|
||||
#define CONFIG_MX1ADS 1 /* on a Motorola MX1ADS Board */
|
||||
|
||||
/*
|
||||
* Select serial console configuration
|
||||
*/
|
||||
#define CONFIG_IMX_SERIAL
|
||||
#define CONFIG_IMX_SERIAL1 /* internal uart 1 */
|
||||
/* #define _CONFIG_UART2 */ /* internal uart 2 */
|
||||
/* #define CONFIG_SILENT_CONSOLE */ /* use this to disable output */
|
||||
|
||||
#define CONFIG_BOARD_LATE_INIT
|
||||
#define USE_920T_MMU 1
|
||||
|
||||
#if 0
|
||||
#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
|
||||
#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
|
||||
#define CONFIG_SYS_MX1_GPCR 0x000003AB /* for MX1ADS 0L44N */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Size of malloc() pool
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
||||
|
||||
/*
|
||||
* CS8900 Ethernet drivers
|
||||
*/
|
||||
#define CONFIG_CS8900 /* we have a CS8900 on-board */
|
||||
#define CONFIG_CS8900_BASE 0x15000300
|
||||
#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
|
||||
|
||||
/*
|
||||
* select serial console configuration
|
||||
*/
|
||||
|
||||
/* #define CONFIG_UART1 */
|
||||
/* #define CONFIG_UART2 1 */
|
||||
|
||||
#define CONFIG_BAUDRATE 115200
|
||||
|
||||
/*
|
||||
* BOOTP options
|
||||
*/
|
||||
#define CONFIG_BOOTP_BOOTFILESIZE
|
||||
#define CONFIG_BOOTP_BOOTPATH
|
||||
#define CONFIG_BOOTP_GATEWAY
|
||||
#define CONFIG_BOOTP_HOSTNAME
|
||||
|
||||
/*
|
||||
* Command line configuration.
|
||||
*/
|
||||
#include <config_cmd_default.h>
|
||||
|
||||
#define CONFIG_CMD_CACHE
|
||||
#define CONFIG_CMD_REGINFO
|
||||
#define CONFIG_CMD_ELF
|
||||
|
||||
#define CONFIG_BOOTDELAY 3
|
||||
#define CONFIG_BOOTARGS "root=/dev/msdk mem=48M"
|
||||
#define CONFIG_BOOTFILE "mx1ads"
|
||||
#define CONFIG_BOOTCOMMAND "tftp; bootm"
|
||||
|
||||
#if defined(CONFIG_CMD_KGDB)
|
||||
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
||||
#endif
|
||||
|
||||
/*
|
||||
* Miscellaneous configurable options
|
||||
*/
|
||||
|
||||
#define CONFIG_SYS_HUSH_PARSER 1
|
||||
|
||||
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
||||
|
||||
#ifdef CONFIG_SYS_HUSH_PARSER
|
||||
#define CONFIG_SYS_PROMPT "MX1ADS$ " /* Monitor Command Prompt */
|
||||
#else
|
||||
#define CONFIG_SYS_PROMPT "MX1ADS=> " /* Monitor Command Prompt */
|
||||
#endif
|
||||
|
||||
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
||||
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
||||
/* Print Buffer Size */
|
||||
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
||||
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
||||
|
||||
#define CONFIG_SYS_MEMTEST_START 0x09000000 /* memtest works on */
|
||||
#define CONFIG_SYS_MEMTEST_END 0x0AF00000 /* 63 MB in DRAM */
|
||||
|
||||
#define CONFIG_SYS_LOAD_ADDR 0x08800000 /* default load address */
|
||||
#define CONFIG_SYS_HZ 3686400
|
||||
#define CONFIG_SYS_CPUSPEED 0x141
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Physical Memory Map
|
||||
*/
|
||||
|
||||
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
|
||||
#define PHYS_SDRAM_1 0x08000000 /* SDRAM on CSD0 */
|
||||
#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
|
||||
|
||||
#define CONFIG_SYS_TEXT_BASE 0x10000000
|
||||
|
||||
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
||||
#define CONFIG_SYS_INIT_RAM_ADDR 0x00300000
|
||||
#define CONFIG_SYS_INIT_RAM_SIZE 0x000FFFFF
|
||||
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
||||
GENERATED_GBL_DATA_SIZE)
|
||||
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
||||
CONFIG_SYS_GBL_DATA_OFFSET)
|
||||
|
||||
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* 1 bank of SyncFlash */
|
||||
#define CONFIG_SYS_FLASH_BASE 0x0C000000 /* SyncFlash on CSD1 */
|
||||
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* FLASH and environment organization
|
||||
*/
|
||||
|
||||
#define CONFIG_SYNCFLASH 1
|
||||
#define PHYS_FLASH_SIZE 0x01000000
|
||||
#define CONFIG_SYS_MAX_FLASH_SECT (16)
|
||||
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE+0x00ff8000)
|
||||
|
||||
#define CONFIG_ENV_IS_IN_FLASH 1
|
||||
#define CONFIG_ENV_SIZE 0x04000 /* Total Size of Environment Sector */
|
||||
#define CONFIG_ENV_SECT_SIZE 0x100000
|
||||
|
||||
/*-----------------------------------------------------------------------
|
||||
* Enable passing ATAGS
|
||||
*/
|
||||
|
||||
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
||||
#define CONFIG_SETUP_MEMORY_TAGS 1
|
||||
|
||||
#define CONFIG_SYS_CLK_FREQ 16780000
|
||||
#define CONFIG_SYSPLL_CLK_FREQ 16000000
|
||||
|
||||
#endif /* __CONFIG_H */
|
||||
Loading…
Reference in New Issue