LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
37,953 Commits 68 Branches 337 Tags 212 MiB
Commit Graph

136 Commits

Author SHA1 Message Date
Rene Straub aea345876d nmhw: cleanup/align with nrsw code 2019-09-25 11:10:25 +02:00
Rene Straub afbe8bf08d nmhw: update emmc device names 
- kernel 4 uses mmcblk1 instead of mmcblk0
- update documentation accordingly
 2019-09-25 10:58:09 +02:00
Rene Straub a28cffaf0f nmhw24: rename to nrhw24 2019-09-25 10:43:32 +02:00
Ramon Moesching cd9281a619 nmhw21 board.c: turn off indicator led in board_init() 
BugzID: 59055

Signed-off-by: Ramon Moesching <ramon.moesching@netmodule.com>
 2019-09-20 11:43:00 +02:00
Rene Straub 803e05c65c nmhw21 - update pmic driver from nmhw24 
- use C types instead of uboot types
 2019-09-07 12:28:23 +02:00
Rene Straub f3c79d769b nmhw24 - update pmic registers 2019-09-07 12:22:23 +02:00
Rene Straub 88426e4041 nmhw21 - change PMIC config to synchronous mode 
in rare cases the default automatic mode switching can disable a power
rail. To prevent this all used buck regulators are configured to
synchronous mode.
 2019-09-07 11:05:09 +02:00
Rene Straub 5488c0795d nmhw21: cleanup 
- fix formatting
- remove unused variable
 2019-09-07 10:20:30 +02:00
Lucien Mueller 8ec934e776 Give UM more time to boot. 
Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
 2019-08-26 13:02:10 +02:00
Rene Straub 2c5343e02b nmhw24: prepare shield support 2019-08-23 07:35:36 +02:00
Rene Straub 70b14b3131 nmhw24: code cleanup 2019-08-16 16:20:38 +02:00
Rene Straub 5345ae1a18 nmhw24: correct led assignment 2019-08-16 15:15:45 +02:00
Rene Straub a0de5b0e8e nmhw24: fix PMIC accesses 
PMIC access needs to be enclosed in claim/release bus functions.
 2019-08-14 09:07:57 +02:00
Rene Straub dc7afab487 nmhw24: enable wifi supply at startup 2019-08-14 09:07:57 +02:00
Rene Straub 909be035f4 nmhw24: created target 2019-08-14 09:07:57 +02:00
Rene Straub 5c5c0b98fe nmhw21: don't power up GSM modem at startup 
BugzID: 57459
 2019-06-12 12:59:11 +02:00
Rene Straub ccb5de587f nmhw21: provide bootloader version in device tree 2019-06-04 08:00:02 +02:00
Rene Straub 87657dd68f nmhw21: fix wrong hw version of user module 
- hw version of UM was set to version of base board
 2019-04-01 15:06:35 +02:00
Rene Straub 29d7a20fdb nmhw21: support for user module device tree node 
- fill out /user_module node with:
  - status: okay/disabled
  - model: UM type
  - hw version/revision
  - network configuration
- show product variant in boot log
- set product variant in device tree /model
 2019-03-30 14:14:46 +01:00
Rene Straub 3e938e9ab8 nmhw21: add support for UM network config 
- get network configuration from UM via I2C
- provide method to retrieve IP and mask
 2019-03-30 12:22:47 +01:00
Rene Straub db067fefdd nm: cleanup board descriptor library 
- fix documentation/license information
- fix missing includes (dependancies, own header file)
- fix declaration mismatches
- fix data types
- fix parentheses
- fix order of functions in source/header
 2019-03-30 11:07:39 +01:00
Wieslaw Kubala f6a10e8995 nmhw21: update static configuration of SJA1105 switch 
- set default VLAN ID for untagged frames to 4095,
- set ports 0-2 speed to 0 - allows linux driver to set speed later on.

BugzID: 55890
Signed-off-by: Wieslaw Kubala <wieslaw.kubala@netmodule.com>
 2019-02-26 09:27:39 +01:00
Rene Straub 6901116337 nmhw21: fix user module version detection 
- version register read requires a delay of 50ms
 2019-02-18 11:56:09 +01:00
Wieslaw Kubala a135a2d3ac nmhw21: clean up static configuration of SJA1105 switch 
- remove groupcast filter for 01:80:C2:00:00:0E address
- remove VLAN 1 and 73

BugzID: 55710
Signed-off-by: Wieslaw Kubala <wieslaw.kubala@netmodule.com>
 2019-02-15 11:23:06 +01:00
Rene Straub d10a7daaaf nmhw21: fix broadr PHY addresses for HW v1.0 
- set PHY Id 6 for broadr0 on v1.0
- set PHY Id 7 for broadr1 on v1.0

BugzId: 55529
 2019-02-05 09:13:13 +01:00
Rene Straub d53bbfbc77 nmhw21: improve support for tja1102 dual phy 
- install filter driver for mdio read funtion
- remove ghost phy at address 0
- report phy type also for 2nd port

BugzId: 55131
 2019-01-11 12:12:48 +01:00
Rene Straub f3d2175a53 nmhw21: add user module detection 
- create new 'um' module to handle user module detection
- in nmhw21 board file
  - try to read presence register and check for magic ID
  - if found, determine type and hw version
  - display information at startup

BugzID: 53758
 2019-01-05 14:59:39 +01:00
Rene Straub d6cecc7f62 nmhw21: add configuration option for Ethernet link timeout 
- env variable linktimeout defines timeout in milliseconds
- valid range is 1000 to 10000 ms
- default timeout is 5 seconds

BugzID: 55019
 2019-01-05 12:25:51 +01:00
Rene Straub 84189ee455 nmhw21: add factory reset/recovery boot 
- check reset button at startup
- short press (2s) invokes factory reset.
   - adds factory-reset to bootline
- long press (12s) invokes recovery boot in the following order:
   1. pxe boot
   2. tftp recovery boot

BugzID: 55039
 2019-01-04 18:23:07 +01:00
Rene Straub 36d526cc87 nmhw21: cleanup da9063 driver 
- remove unnecessary and dead code
 2019-01-04 15:11:56 +01:00
Rene Straub 80417a713a nmhw21: apply PMIC sequencer fixes to v1.2 configuration 
- apply sequencer fixes up to and including v1.2 config
- note: v1.3 config is incorrectly stored as v1.2 and will thus
 also be "fixed", although this is not required.

BugzID: 53234
 2019-01-04 14:29:02 +01:00
Rene Straub 255163782d nmhw21: trim RTC for better accuracy 
- trim RTC by -18ppm (average deviation of prototype build 2)

BugzID: 55020
 2019-01-04 13:46:26 +01:00
Rene Straub bf667f5171 nmhw21: fixup code for hw_rev 1.0 broadr phy addr 
phy addresses have been changed from rev 1.0 (6+7) to rev 2.0 and later
(2+3). the function ft_eth() overwrites these addresses in fdt_path just
for rev 1.0 boards.

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-12-16 16:28:32 +01:00
Rene Straub 2ddfb8e382 nmhw21: define LED state during boot 
- Set LED colors in SPL start, bootloader start and end
- Minor cleanup (documentation, dead code)

BugzID: 54745
 2018-12-16 15:59:55 +01:00
Rene Straub 5d4e667c1c nmhw21: add support for hw v2.0 
- enable kl15 ignition gating control
- support BroadR PHY addresses 2,3 on hw v2.0
- add DTB fixup for UI leds
- remove code to read partition table descriptor
- remove unused variables
- update da9063 driver
  - add new register definitions
  - fix bug with nullpointer check in da9063_set_reg()
- fix led 0 pins (red/green swapped)

BugzID: 54785

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-12-11 21:26:21 +01:00
Lucien Mueller be3dbc4966 nmhw21: Removed hw-revision form env. 
BugzID: 54508

Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
 2018-12-05 09:40:40 +01:00
Rene Straub cf3a77fa95 nmhw21: enable factory test station detection 
Check whether an I2C device (EEPROM) is present at address 0xA2/0x51 as
part of the factory test sequence.

BugzID: 54436

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-11-23 19:26:33 +01:00
Patrick Zysset c67fb07a2a nmhw21: fix several cppcheck warnings 
BugzID: 54211

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-11-23 01:16:37 +01:00
Mikael Trigo 8805c1c6d3 nmhw_21: fix U-Boot phy config based on review 2018-11-09 10:10:50 +01:00
Patrick Zysset a94b7cce1f nmhw21: add ostree env to board settings 
values taken from ostree documenation
additionally we removed legacy env which are never used on this hardware

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-11-08 19:35:08 +01:00
mikaeltrigo beb0d6dfd0 nmhw21: broadr configuration 
add configure_broad_phys
remove uboot env variable for broadr
 2018-11-08 15:49:41 +01:00
Rene Straub a0bd4715b0 nmhw21: prepare Ethernet v2.0 initialization 2018-11-02 18:24:19 +01:00
Rene Straub 7fda5662f3 nmhw21: update V2.0 gpio 2018-11-02 07:49:02 +01:00
Rene Straub a962411cbf nmhw21: prepare UI v2.0 implementation 2018-11-02 07:13:02 +01:00
Rene Straub c0550c87fb nmhw21: rename project 2018-11-01 09:38:53 +01:00
Rene Straub ac6d09c2b7 nmhw21: add support for JTAG boot 
- trigger breakpoint in SPL during JTAG boot
- don't execute boot command/remain on console in bootloader
 2018-10-27 01:22:18 +02:00
mikaeltrigo a7647131e0 nmhw21 : add V2.0 UI detection along V1.0 
You will find a UI: xxx output in the startup log of U-Boot.

BugzID: 53817

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-10-25 20:52:11 +02:00
Mikael Trigo 3a9388907a vcu: user interface detection improved 
- detect ui once (remember status)
- normalize boot message format
- hide i2c errors in omap24xx driver if not ui is connected

BugzID: 53086
BugzID: 53087
BugzID: 53088

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-09-14 14:52:53 +02:00
Mikael Trigo 1923f7f14d vcu: UserInterface detetion 
Detect availability of user interface using a dummy i2c access.
Change of DTS led depending on presence of UI boards.

Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
 2018-09-14 14:29:37 +02:00
Rene Straub 92bdea79bc nrhw20: add shield support 
- use OF library to enable shield nodes in devicetree
- delete command line based devicetree configuration
- add console configuration options for COMIO shield
 2018-07-19 15:21:21 +02:00