665f70c8a5
hw20: Update environnement to boot ostree image
...
BugzID: 57957
2019-07-16 17:30:30 +02:00
71994a6136
nmhw21: Boot using only the fitImage
...
Since thud release, the initramfs used to start the ostree image
is also included in the fitImage. Therefore only this fitImage is
now required.
Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
2019-06-29 01:01:27 +02:00
baa5e4fcea
hw16: Make compatible with ostree
2019-04-15 17:13:58 +02:00
1862aa951b
hw16: Use mmcblk1 as root
...
Since Kernel 4.14 the mmc label have changed and root is on mmc1
while mmc0 is the mmc interface on which the wifi chip is conntected
2019-04-12 09:25:00 +02:00
fe1a692af7
nmhw21: remove kernel_image=zImage from u-boot env.
...
BugzID: 54718
Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
2019-01-09 15:32:45 +01:00
ec3ae39b9d
nmhw21: cleanup board config file 2
...
- remove Androind fast boot stuff
- remove i2c i/o extender cli
2019-01-05 16:05:49 +01:00
92bbeca1d6
nmhw21: cleanup board config file
2019-01-05 15:56:28 +01:00
7a70f41cd9
nmhw21: refactor memory map description/names
2019-01-05 15:48:40 +01:00
49e124efb4
nmhw21: apply dynamic link detection to recovery boot
...
- replace fixed delay for pxe boot with mdio up command
- increase dhcp/bootp timeout to 10 seconds.
5 seconds have shown to be close when DHCP server observes link
by itself.
BugzID: 55019
2019-01-05 12:51:14 +01:00
d6cecc7f62
nmhw21: add configuration option for Ethernet link timeout
...
- env variable linktimeout defines timeout in milliseconds
- valid range is 1000 to 10000 ms
- default timeout is 5 seconds
BugzID: 55019
2019-01-05 12:25:51 +01:00
b35026d001
u-boot-env: changed fdt_high and initrd_high to 0xffffffff
...
BugzID: 54592
Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
2018-12-06 16:46:36 +01:00
750ce01f67
am335x_nmhw21 env: Renamed fdt_addr to fdt_addr_r.
...
This will hinder pxe to try to load a devicetree.
BugzID: 54220
Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
2018-11-20 11:02:11 +01:00
fc155929e5
am335x_nmhw21 env: Reworked the memory-addresses.
...
BugzID: 54210
Signed-off-by: Lucien Mueller <lucien.mueller@netmodule.com>
2018-11-20 11:02:01 +01:00
cb21ed3b23
nmhw21: adjust bootenv due to changed WIC behavior
...
SPL and U-Boot are moved to raw mmc memory - thus partition numbering
for rootfs have been changed.
BugzID: 54224
Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
2018-11-14 19:27:45 +01:00
1726e4f99c
nmhw21: fix bootcmd_otenv (filesize)
...
replaced file_size with filesize to get rid of data overriding ...
BugzID: 54229
Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
2018-11-10 18:03:33 +01:00
a94b7cce1f
nmhw21: add ostree env to board settings
...
values taken from ostree documenation
additionally we removed legacy env which are never used on this hardware
Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
2018-11-08 19:35:08 +01:00
beb0d6dfd0
nmhw21: broadr configuration
...
add configure_broad_phys
remove uboot env variable for broadr
2018-11-08 15:49:41 +01:00
c0550c87fb
nmhw21: rename project
2018-11-01 09:38:53 +01:00
ac6d09c2b7
nmhw21: add support for JTAG boot
...
- trigger breakpoint in SPL during JTAG boot
- don't execute boot command/remain on console in bootloader
2018-10-27 01:22:18 +02:00
462e9c4b5a
vcu: set bootdelay to zero
...
I've successfully reduce boot time delay to 0 see case 53380 at the main
time I've added useful command to init BroadR phy until the Driver is
ready I've also fix the kernel_image definition
- set ubootdelay to 0
- add broadR init
- fix kernel image definition in u-boot env
BugzID: 53380
Signed-off-by: Patrick Zysset <patrick.zysset@netmodule.com>
2018-09-27 14:00:20 +02:00
92bdea79bc
nrhw20: add shield support
...
- use OF library to enable shield nodes in devicetree
- delete command line based devicetree configuration
- add console configuration options for COMIO shield
2018-07-19 15:21:21 +02:00
88720cc579
net: Use packed structures for networking
...
PXE boot is broken with GCC 7.1 due option '-fstore-merging' enabled
by default for '-O2':
BOOTP broadcast 1
data abort
pc : [<8ff8bb30>] lr : [<00004f1f>]
reloc pc : [<17832b30>] lr : [<878abf1f>]
sp : 8f558bc0 ip : 00000000 fp : 8ffef5a4
r10: 8ffed248 r9 : 8f558ee0 r8 : 8ffef594
r7 : 0000000e r6 : 8ffed700 r5 : 00000000 r4 : 8ffed74e
r3 : 00060101 r2 : 8ffed230 r1 : 8ffed706 r0 : 00000ddd
Flags: nzcv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
Core reason is usage of structures for network headers without packed
attribute.
Reviewed-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Denis Pynkin <denis.pynkin@collabora.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Conflicts:
include/net.h
2018-07-17 12:41:18 +02:00
34e91fa6e1
hancock: set board version in device-tree
2018-07-06 20:30:27 +02:00
786c7ae6c3
hancock: change DTB default name
2018-07-06 18:16:09 +02:00
7227528d40
hancock: fix and increase bootp timeout
2018-07-06 18:13:44 +02:00
957b2967e0
hancock: spi driver test
2018-06-16 13:24:43 +02:00
5fc651b1ae
hancock: change console to UART2 (board config file)
2018-06-16 12:07:14 +02:00
17a0af95a9
hancock: update during board bringup
2018-06-16 11:20:37 +02:00
713f471820
hancock: add SMSC Ethernet PHY support
2018-06-08 13:53:15 +02:00
b85f04e84a
hancock: prepare spi driver for ethernet switch configuration
...
- enable spi1 unit peripheral clock
- add test function for hw integration
2018-06-07 08:52:47 +02:00
a8a71f0287
hancock: initial commit
2018-06-06 14:24:01 +02:00
29f4a69460
nrhw20: update default environment
...
- fix DTB file name
- change boot partition to /dev/mmcblk1
- cleanup
2018-02-28 14:56:29 +01:00
32bd1aef95
nrhw20: cleanup board config file
...
- Remove clock synthesizer
- Cleanup and formatting
2018-02-23 09:24:17 +01:00
619d72886f
nrhw20: revert changes to EEPROM config
2018-02-23 08:43:14 +01:00
f5664dbb12
nrhw20: remove spl command
2018-02-23 08:38:38 +01:00
09dd80b40d
nrhw20: update default config
...
- add high addresses for fdt, init ramdisc
- add cpsw Ethernet driver maximum frame size to bootline
2018-02-19 12:05:08 +01:00
7ea38f55a4
nrhw20: refactore and cleanup board file
...
- move environment to eMMC
- add i2c io extender driver
- enable RTC backup battery charging
- remove occurances of 2nd ethernet port
- remove dead code
2018-02-09 14:06:56 +01:00
4efe96de7f
nrhw20: add mv88e60xx to phy library
2018-02-08 12:53:35 +01:00
d4d8afa3f0
nrhw20: first implementation of 88E6071 switch
2018-02-06 17:09:40 +01:00
4ebdf0876f
nrhw20: preparations for GPIO, I2C
2018-01-06 18:33:29 +01:00
756fa2b3e3
nrhw20: review, cleanup
2018-01-04 17:33:53 +01:00
7518ca5631
nrhw20: initial commit
2017-12-15 15:00:24 +01:00
22506ffe45
nbhw16: add shield command (dualcan and comio)
2017-07-05 16:18:00 +02:00
8fcb0f99f7
netbird_v2: pxe boot: update environment
2017-03-30 15:13:19 +02:00
e494b8cf62
netbird_v2: set addresses direct not via variables
...
Variable assignment via variables does not work in the predefined
configuration.
2017-03-22 09:45:51 +01:00
36db1ecf18
netbird_v2: make address hexadecimal
2017-03-21 12:43:40 +01:00
1cf38b946c
netbird_v2: set correct pxefileaddr
2017-03-21 12:42:08 +01:00
237c554f79
netbird_v2: fix previous commit
2017-03-21 11:58:56 +01:00
a9612b4971
netbird_v2: enable pxe boot
2017-03-20 17:43:15 +01:00
18ea9aa748
netbird: use fdt_image for bringupboot too
2017-03-01 10:14:12 +01:00
Alexandre Bard
Lucien Mueller
Rene Straub
Patrick Zysset
mikaeltrigo
Denis Pynkin
Stefan Eichenberger