221 lines
13 KiB
C
221 lines
13 KiB
C
/*
|
|
* ATAPI Masks
|
|
*/
|
|
|
|
#ifndef __BFIN_PERIPHERAL_PATA__
|
|
#define __BFIN_PERIPHERAL_PATA__
|
|
|
|
/* Bit masks for ATAPI_CONTROL */
|
|
#define PIO_START 0x1 /* Start PIO/Reg Op */
|
|
#define MULTI_START 0x2 /* Start Multi-DMA Op */
|
|
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
|
|
#define XFER_DIR 0x8 /* Transfer Direction */
|
|
#define IORDY_EN 0x10 /* IORDY Enable */
|
|
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
|
|
#define SOFT_RST 0x40 /* Soft Reset */
|
|
#define DEV_RST 0x80 /* Device Reset */
|
|
#define TFRCNT_RST 0x100 /* Trans Count Reset */
|
|
#define END_ON_TERM 0x200 /* End/Terminate Select */
|
|
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
|
|
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
|
|
|
|
/* Bit masks for ATAPI_STATUS */
|
|
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
|
|
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
|
|
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
|
|
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
|
|
|
|
/* Bit masks for ATAPI_DEV_ADDR */
|
|
#define DEV_ADDR 0x1f /* Device Address */
|
|
|
|
/* Bit masks for ATAPI_INT_MASK */
|
|
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
|
|
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
|
|
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
|
|
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
|
|
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
|
|
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
|
|
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
|
|
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
|
|
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
|
|
|
|
/* Bit masks for ATAPI_INT_STATUS */
|
|
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
|
|
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
|
|
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
|
|
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
|
|
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
|
|
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
|
|
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
|
|
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
|
|
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
|
|
|
|
/* Bit masks for ATAPI_LINE_STATUS */
|
|
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
|
|
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
|
|
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
|
|
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
|
|
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
|
|
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
|
|
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
|
|
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
|
|
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
|
|
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
|
|
|
|
/* Bit masks for ATAPI_SM_STATE */
|
|
#define PIO_CSTATE 0xf /* PIO mode state machine current state */
|
|
#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
|
|
#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
|
|
#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
|
|
|
|
/* Bit masks for ATAPI_TERMINATE */
|
|
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
|
|
|
|
/* Bit masks for ATAPI_REG_TIM_0 */
|
|
#define T2_REG 0xff /* End of cycle time for register access transfers */
|
|
#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
|
|
|
|
/* Bit masks for ATAPI_PIO_TIM_0 */
|
|
#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
|
|
#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
|
|
#define T4_REG 0xf000 /* DIOW data hold */
|
|
|
|
/* Bit masks for ATAPI_PIO_TIM_1 */
|
|
#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
|
|
|
|
/* Bit masks for ATAPI_MULTI_TIM_0 */
|
|
#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
|
|
#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
|
|
|
|
/* Bit masks for ATAPI_MULTI_TIM_1 */
|
|
#define TKW 0xff /* Selects DIOW negated pulsewidth */
|
|
#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
|
|
|
|
/* Bit masks for ATAPI_MULTI_TIM_2 */
|
|
#define TH 0xff /* Selects DIOW data hold */
|
|
#define TEOC 0xff00 /* Selects end of cycle for DMA */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_0 */
|
|
#define TACK 0xff /* Selects setup and hold times for TACK */
|
|
#define TENV 0xff00 /* Selects envelope time */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_1 */
|
|
#define TDVS 0xff /* Selects data valid setup time */
|
|
#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_2 */
|
|
#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
|
|
#define TMLI 0xff00 /* Selects interlock time */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_3 */
|
|
#define TZAH 0xff /* Selects minimum delay required for output */
|
|
#define READY_PAUSE 0xff00 /* Selects ready to pause */
|
|
|
|
/* Bit masks for ATAPI_CONTROL */
|
|
#define PIO_START 0x1 /* Start PIO/Reg Op */
|
|
#define MULTI_START 0x2 /* Start Multi-DMA Op */
|
|
#define ULTRA_START 0x4 /* Start Ultra-DMA Op */
|
|
#define XFER_DIR 0x8 /* Transfer Direction */
|
|
#define IORDY_EN 0x10 /* IORDY Enable */
|
|
#define FIFO_FLUSH 0x20 /* Flush FIFOs */
|
|
#define SOFT_RST 0x40 /* Soft Reset */
|
|
#define DEV_RST 0x80 /* Device Reset */
|
|
#define TFRCNT_RST 0x100 /* Trans Count Reset */
|
|
#define END_ON_TERM 0x200 /* End/Terminate Select */
|
|
#define PIO_USE_DMA 0x400 /* PIO-DMA Enable */
|
|
#define UDMAIN_FIFO_THRS 0xf000 /* Ultra DMA-IN FIFO Threshold */
|
|
|
|
/* Bit masks for ATAPI_STATUS */
|
|
#define PIO_XFER_ON 0x1 /* PIO transfer in progress */
|
|
#define MULTI_XFER_ON 0x2 /* Multi-word DMA transfer in progress */
|
|
#define ULTRA_XFER_ON 0x4 /* Ultra DMA transfer in progress */
|
|
#define ULTRA_IN_FL 0xf0 /* Ultra DMA Input FIFO Level */
|
|
|
|
/* Bit masks for ATAPI_DEV_ADDR */
|
|
#define DEV_ADDR 0x1f /* Device Address */
|
|
|
|
/* Bit masks for ATAPI_INT_MASK */
|
|
#define ATAPI_DEV_INT_MASK 0x1 /* Device interrupt mask */
|
|
#define PIO_DONE_MASK 0x2 /* PIO transfer done interrupt mask */
|
|
#define MULTI_DONE_MASK 0x4 /* Multi-DMA transfer done interrupt mask */
|
|
#define UDMAIN_DONE_MASK 0x8 /* Ultra-DMA in transfer done interrupt mask */
|
|
#define UDMAOUT_DONE_MASK 0x10 /* Ultra-DMA out transfer done interrupt mask */
|
|
#define HOST_TERM_XFER_MASK 0x20 /* Host terminate current transfer interrupt mask */
|
|
#define MULTI_TERM_MASK 0x40 /* Device terminate Multi-DMA transfer interrupt mask */
|
|
#define UDMAIN_TERM_MASK 0x80 /* Device terminate Ultra-DMA-in transfer interrupt mask */
|
|
#define UDMAOUT_TERM_MASK 0x100 /* Device terminate Ultra-DMA-out transfer interrupt mask */
|
|
|
|
/* Bit masks for ATAPI_INT_STATUS */
|
|
#define ATAPI_DEV_INT 0x1 /* Device interrupt status */
|
|
#define PIO_DONE_INT 0x2 /* PIO transfer done interrupt status */
|
|
#define MULTI_DONE_INT 0x4 /* Multi-DMA transfer done interrupt status */
|
|
#define UDMAIN_DONE_INT 0x8 /* Ultra-DMA in transfer done interrupt status */
|
|
#define UDMAOUT_DONE_INT 0x10 /* Ultra-DMA out transfer done interrupt status */
|
|
#define HOST_TERM_XFER_INT 0x20 /* Host terminate current transfer interrupt status */
|
|
#define MULTI_TERM_INT 0x40 /* Device terminate Multi-DMA transfer interrupt status */
|
|
#define UDMAIN_TERM_INT 0x80 /* Device terminate Ultra-DMA-in transfer interrupt status */
|
|
#define UDMAOUT_TERM_INT 0x100 /* Device terminate Ultra-DMA-out transfer interrupt status */
|
|
|
|
/* Bit masks for ATAPI_LINE_STATUS */
|
|
#define ATAPI_INTR 0x1 /* Device interrupt to host line status */
|
|
#define ATAPI_DASP 0x2 /* Device dasp to host line status */
|
|
#define ATAPI_CS0N 0x4 /* ATAPI chip select 0 line status */
|
|
#define ATAPI_CS1N 0x8 /* ATAPI chip select 1 line status */
|
|
#define ATAPI_ADDR 0x70 /* ATAPI address line status */
|
|
#define ATAPI_DMAREQ 0x80 /* ATAPI DMA request line status */
|
|
#define ATAPI_DMAACKN 0x100 /* ATAPI DMA acknowledge line status */
|
|
#define ATAPI_DIOWN 0x200 /* ATAPI write line status */
|
|
#define ATAPI_DIORN 0x400 /* ATAPI read line status */
|
|
#define ATAPI_IORDY 0x800 /* ATAPI IORDY line status */
|
|
|
|
/* Bit masks for ATAPI_SM_STATE */
|
|
#define PIO_CSTATE 0xf /* PIO mode state machine current state */
|
|
#define DMA_CSTATE 0xf0 /* DMA mode state machine current state */
|
|
#define UDMAIN_CSTATE 0xf00 /* Ultra DMA-In mode state machine current state */
|
|
#define UDMAOUT_CSTATE 0xf000 /* ATAPI IORDY line status */
|
|
|
|
/* Bit masks for ATAPI_TERMINATE */
|
|
#define ATAPI_HOST_TERM 0x1 /* Host terminationation */
|
|
|
|
/* Bit masks for ATAPI_REG_TIM_0 */
|
|
#define T2_REG 0xff /* End of cycle time for register access transfers */
|
|
#define TEOC_REG 0xff00 /* Selects DIOR/DIOW pulsewidth */
|
|
|
|
/* Bit masks for ATAPI_PIO_TIM_0 */
|
|
#define T1_REG 0xf /* Time from address valid to DIOR/DIOW */
|
|
#define T2_REG_PIO 0xff0 /* DIOR/DIOW pulsewidth */
|
|
#define T4_REG 0xf000 /* DIOW data hold */
|
|
|
|
/* Bit masks for ATAPI_PIO_TIM_1 */
|
|
#define TEOC_REG_PIO 0xff /* End of cycle time for PIO access transfers. */
|
|
|
|
/* Bit masks for ATAPI_MULTI_TIM_0 */
|
|
#define TD 0xff /* DIOR/DIOW asserted pulsewidth */
|
|
#define TM 0xff00 /* Time from address valid to DIOR/DIOW */
|
|
|
|
/* Bit masks for ATAPI_MULTI_TIM_1 */
|
|
#define TKW 0xff /* Selects DIOW negated pulsewidth */
|
|
#define TKR 0xff00 /* Selects DIOR negated pulsewidth */
|
|
|
|
/* Bit masks for ATAPI_MULTI_TIM_2 */
|
|
#define TH 0xff /* Selects DIOW data hold */
|
|
#define TEOC 0xff00 /* Selects end of cycle for DMA */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_0 */
|
|
#define TACK 0xff /* Selects setup and hold times for TACK */
|
|
#define TENV 0xff00 /* Selects envelope time */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_1 */
|
|
#define TDVS 0xff /* Selects data valid setup time */
|
|
#define TCYC_TDVS 0xff00 /* Selects cycle time - TDVS time */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_2 */
|
|
#define TSS 0xff /* Selects time from STROBE edge to negation of DMARQ or assertion of STOP */
|
|
#define TMLI 0xff00 /* Selects interlock time */
|
|
|
|
/* Bit masks for ATAPI_ULTRA_TIM_3 */
|
|
#define TZAH 0xff /* Selects minimum delay required for output */
|
|
#define READY_PAUSE 0xff00 /* Selects ready to pause */
|
|
|
|
#endif /* __BFIN_PERIPHERAL_PATA__ */
|