290 lines
7.7 KiB
C
290 lines
7.7 KiB
C
/*
|
|
* (C) Copyright 2008
|
|
* Graeme Russ, graeme.russ@gmail.com.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/sc520.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
|
|
#ifdef CONFIG_HW_WATCHDOG
|
|
#include <watchdog.h>
|
|
#endif
|
|
|
|
#include "hardware.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
|
|
|
|
static void enet_timer_isr(void);
|
|
static void enet_toggle_run_led(void);
|
|
static void enet_setup_pars(void);
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initializations
|
|
*/
|
|
int board_early_init_f(void)
|
|
{
|
|
u16 pio_out_cfg = 0x0000;
|
|
|
|
/* Configure General Purpose Bus timing */
|
|
writeb(CONFIG_SYS_SC520_GPCSRT, &sc520_mmcr->gpcsrt);
|
|
writeb(CONFIG_SYS_SC520_GPCSPW, &sc520_mmcr->gpcspw);
|
|
writeb(CONFIG_SYS_SC520_GPCSOFF, &sc520_mmcr->gpcsoff);
|
|
writeb(CONFIG_SYS_SC520_GPRDW, &sc520_mmcr->gprdw);
|
|
writeb(CONFIG_SYS_SC520_GPRDOFF, &sc520_mmcr->gprdoff);
|
|
writeb(CONFIG_SYS_SC520_GPWRW, &sc520_mmcr->gpwrw);
|
|
writeb(CONFIG_SYS_SC520_GPWROFF, &sc520_mmcr->gpwroff);
|
|
|
|
/* Configure Programmable Input/Output Pins */
|
|
writew(CONFIG_SYS_SC520_PIODIR15_0, &sc520_mmcr->piodir15_0);
|
|
writew(CONFIG_SYS_SC520_PIODIR31_16, &sc520_mmcr->piodir31_16);
|
|
writew(CONFIG_SYS_SC520_PIOPFS31_16, &sc520_mmcr->piopfs31_16);
|
|
writew(CONFIG_SYS_SC520_PIOPFS15_0, &sc520_mmcr->piopfs15_0);
|
|
writeb(CONFIG_SYS_SC520_CSPFS, &sc520_mmcr->cspfs);
|
|
writeb(CONFIG_SYS_SC520_CLKSEL, &sc520_mmcr->clksel);
|
|
|
|
/*
|
|
* Turn off top board
|
|
* Set StrataFlash chips to 16-bit width
|
|
* Set StrataFlash chips to normal (non reset/power down) mode
|
|
*/
|
|
pio_out_cfg |= CONFIG_SYS_ENET_TOP_BRD_PWR;
|
|
pio_out_cfg |= CONFIG_SYS_ENET_SF_WIDTH;
|
|
pio_out_cfg |= CONFIG_SYS_ENET_SF1_MODE;
|
|
pio_out_cfg |= CONFIG_SYS_ENET_SF2_MODE;
|
|
writew(pio_out_cfg, &sc520_mmcr->pioset15_0);
|
|
|
|
/* Turn off auxiliary power output */
|
|
writew(CONFIG_SYS_ENET_AUX_PWR, &sc520_mmcr->pioclr15_0);
|
|
|
|
/* Clear FPGA program mode */
|
|
writew(CONFIG_SYS_ENET_FPGA_PROG, &sc520_mmcr->pioset31_16);
|
|
|
|
enet_setup_pars();
|
|
|
|
/* Disable Watchdog */
|
|
writew(0x3333, &sc520_mmcr->wdtmrctl);
|
|
writew(0xcccc, &sc520_mmcr->wdtmrctl);
|
|
writew(0x0000, &sc520_mmcr->wdtmrctl);
|
|
|
|
/* Chip Select Configuration */
|
|
writew(CONFIG_SYS_SC520_BOOTCS_CTRL, &sc520_mmcr->bootcsctl);
|
|
writew(CONFIG_SYS_SC520_ROMCS1_CTRL, &sc520_mmcr->romcs1ctl);
|
|
writew(CONFIG_SYS_SC520_ROMCS2_CTRL, &sc520_mmcr->romcs2ctl);
|
|
|
|
writeb(CONFIG_SYS_SC520_ADDDECCTL, &sc520_mmcr->adddecctl);
|
|
writeb(CONFIG_SYS_SC520_UART1CTL, &sc520_mmcr->uart1ctl);
|
|
writeb(CONFIG_SYS_SC520_UART2CTL, &sc520_mmcr->uart2ctl);
|
|
|
|
writeb(CONFIG_SYS_SC520_SYSARBCTL, &sc520_mmcr->sysarbctl);
|
|
writew(CONFIG_SYS_SC520_SYSARBMENB, &sc520_mmcr->sysarbmenb);
|
|
|
|
/* enable posted-writes */
|
|
writeb(CONFIG_SYS_SC520_HBCTL, &sc520_mmcr->hbctl);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void enet_setup_pars(void)
|
|
{
|
|
/*
|
|
* PARs 11 and 12 are 2MB SRAM @ 0x19000000
|
|
*
|
|
* These are setup now because older version of U-Boot have them
|
|
* mapped to a different PAR which gets clobbered which prevents
|
|
* using SRAM for warm-booting a new image
|
|
*/
|
|
writel(CONFIG_SYS_SC520_SRAM1_PAR, &sc520_mmcr->par[11]);
|
|
writel(CONFIG_SYS_SC520_SRAM2_PAR, &sc520_mmcr->par[12]);
|
|
|
|
/* PARs 0 and 1 are Compact Flash slots (4kB each) */
|
|
writel(CONFIG_SYS_SC520_CF1_PAR, &sc520_mmcr->par[0]);
|
|
writel(CONFIG_SYS_SC520_CF2_PAR, &sc520_mmcr->par[1]);
|
|
|
|
/* PAR 2 is used for Cache-As-RAM */
|
|
|
|
/*
|
|
* PARs 5 through 8 are additional NS16550 UARTS
|
|
* 8 bytes each @ 0x013f8, 0x012f8, 0x011f8 and 0x010f8
|
|
*/
|
|
writel(CONFIG_SYS_SC520_UARTA_PAR, &sc520_mmcr->par[5]);
|
|
writel(CONFIG_SYS_SC520_UARTB_PAR, &sc520_mmcr->par[6]);
|
|
writel(CONFIG_SYS_SC520_UARTC_PAR, &sc520_mmcr->par[7]);
|
|
writel(CONFIG_SYS_SC520_UARTD_PAR, &sc520_mmcr->par[8]);
|
|
|
|
/* PARs 9 and 10 are 32MB StrataFlash @ 0x10000000 */
|
|
writel(CONFIG_SYS_SC520_SF1_PAR, &sc520_mmcr->par[9]);
|
|
writel(CONFIG_SYS_SC520_SF2_PAR, &sc520_mmcr->par[10]);
|
|
|
|
/* PAR 13 is 4kB DPRAM @ 0x18100000 (implemented in FPGA) */
|
|
writel(CONFIG_SYS_SC520_DPRAM_PAR, &sc520_mmcr->par[13]);
|
|
|
|
/*
|
|
* PAR 14 is Low Level I/O (LEDs, Hex Switches etc)
|
|
* Already configured in board_init16 (eNET_start16.S)
|
|
*
|
|
* PAR 15 is Boot ROM
|
|
* Already configured in board_init16 (eNET_start16.S)
|
|
*/
|
|
}
|
|
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
/* CPU Speed to 100MHz */
|
|
gd->cpu_clk = 100000000;
|
|
|
|
/* Crystal is 33.000MHz */
|
|
gd->bus_clk = 33000000;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void show_boot_progress(int val)
|
|
{
|
|
uchar led_mask;
|
|
|
|
led_mask = 0x00;
|
|
|
|
if (val < 0)
|
|
led_mask |= LED_ERR_BITMASK;
|
|
|
|
led_mask |= (uchar)(val & 0x001f);
|
|
outb(led_mask, LED_LATCH_ADDRESS);
|
|
}
|
|
|
|
|
|
int last_stage_init(void)
|
|
{
|
|
int minor;
|
|
int major;
|
|
|
|
major = minor = 0;
|
|
|
|
outb(0x00, LED_LATCH_ADDRESS);
|
|
|
|
register_timer_isr(enet_timer_isr);
|
|
|
|
printf("Serck Controls eNET\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
|
|
{
|
|
if (banknum == 0) { /* non-CFI boot flash */
|
|
info->portwidth = FLASH_CFI_8BIT;
|
|
info->chipwidth = FLASH_CFI_BY8;
|
|
info->interface = FLASH_CFI_X8;
|
|
return 1;
|
|
} else {
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
void setup_pcat_compatibility()
|
|
{
|
|
/* disable global interrupt mode */
|
|
writeb(0x40, &sc520_mmcr->picicr);
|
|
|
|
/* set all irqs to edge */
|
|
writeb(0x00, &sc520_mmcr->pic_mode[0]);
|
|
writeb(0x00, &sc520_mmcr->pic_mode[1]);
|
|
writeb(0x00, &sc520_mmcr->pic_mode[2]);
|
|
|
|
/*
|
|
* active low polarity on PIC interrupt pins,
|
|
* active high polarity on all other irq pins
|
|
*/
|
|
writew(0x0000, &sc520_mmcr->intpinpol);
|
|
|
|
/*
|
|
* PIT 0 -> IRQ0
|
|
* RTC -> IRQ8
|
|
* FP error -> IRQ13
|
|
* UART1 -> IRQ4
|
|
* UART2 -> IRQ3
|
|
*/
|
|
writeb(SC520_IRQ0, &sc520_mmcr->pit_int_map[0]);
|
|
writeb(SC520_IRQ8, &sc520_mmcr->rtcmap);
|
|
writeb(SC520_IRQ13, &sc520_mmcr->ferrmap);
|
|
writeb(SC520_IRQ4, &sc520_mmcr->uart_int_map[0]);
|
|
writeb(SC520_IRQ3, &sc520_mmcr->uart_int_map[1]);
|
|
|
|
/* Disable all other interrupt sources */
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[0]);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[1]);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->gp_tmr_int_map[2]);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[1]);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->pit_int_map[2]);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->ssimap);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wdtmap);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->wpvmap);
|
|
writeb(SC520_IRQ_DISABLED, &sc520_mmcr->icemap);
|
|
}
|
|
|
|
void enet_timer_isr(void)
|
|
{
|
|
static long enet_ticks;
|
|
|
|
enet_ticks++;
|
|
|
|
/* Toggle Watchdog every 100ms */
|
|
if ((enet_ticks % 100) == 0)
|
|
hw_watchdog_reset();
|
|
|
|
/* Toggle Run LED every 500ms */
|
|
if ((enet_ticks % 500) == 0)
|
|
enet_toggle_run_led();
|
|
}
|
|
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
/* Watchdog Reset must be atomic */
|
|
long flag = disable_interrupts();
|
|
|
|
if (sc520_mmcr->piodata15_0 & WATCHDOG_PIO_BIT)
|
|
sc520_mmcr->pioclr15_0 = WATCHDOG_PIO_BIT;
|
|
else
|
|
sc520_mmcr->pioset15_0 = WATCHDOG_PIO_BIT;
|
|
|
|
if (flag)
|
|
enable_interrupts();
|
|
}
|
|
|
|
void enet_toggle_run_led(void)
|
|
{
|
|
unsigned char leds_state = inb(LED_LATCH_ADDRESS);
|
|
if (leds_state & LED_RUN_BITMASK)
|
|
outb(leds_state & ~LED_RUN_BITMASK, LED_LATCH_ADDRESS);
|
|
else
|
|
outb(leds_state | LED_RUN_BITMASK, LED_LATCH_ADDRESS);
|
|
}
|