222 lines
		
	
	
		
			5.9 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			222 lines
		
	
	
		
			5.9 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * (C) Copyright 2011 Freescale Semiconductor, Inc.
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #ifndef __CONFIG_H
 | |
| #define __CONFIG_H
 | |
| 
 | |
| #include <asm/arch/imx-regs.h>
 | |
| 
 | |
| /* High Level Configuration Options */
 | |
| 
 | |
| #define CONFIG_MX25
 | |
| #define CONFIG_SYS_TEXT_BASE		0x81200000
 | |
| #define CONFIG_MXC_GPIO
 | |
| #define CONFIG_SYS_FSL_CLK
 | |
| 
 | |
| #define CONFIG_SYS_TIMER_RATE		32768
 | |
| #define CONFIG_SYS_TIMER_COUNTER	\
 | |
| 	(&((struct gpt_regs *)IMX_GPT1_BASE)->counter)
 | |
| 
 | |
| #define CONFIG_DISPLAY_CPUINFO
 | |
| #define CONFIG_DISPLAY_BOARDINFO
 | |
| 
 | |
| #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs */
 | |
| #define CONFIG_SETUP_MEMORY_TAGS
 | |
| #define CONFIG_INITRD_TAG
 | |
| 
 | |
| #define CONFIG_MACH_TYPE	MACH_TYPE_MX25_3DS
 | |
| 
 | |
| /* Size of malloc() pool */
 | |
| #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
 | |
| 
 | |
| /* Physical Memory Map */
 | |
| 
 | |
| #define CONFIG_NR_DRAM_BANKS	1
 | |
| #define PHYS_SDRAM_1		0x80000000
 | |
| #define PHYS_SDRAM_1_SIZE	(64 * 1024 * 1024)
 | |
| 
 | |
| #define CONFIG_BOARD_EARLY_INIT_F
 | |
| #define CONFIG_BOARD_LATE_INIT
 | |
| 
 | |
| #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 | |
| #define CONFIG_SYS_INIT_RAM_ADDR	IMX_RAM_BASE
 | |
| #define CONFIG_SYS_INIT_RAM_SIZE	IMX_RAM_SIZE
 | |
| 
 | |
| #define CONFIG_SYS_INIT_SP_OFFSET \
 | |
| 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 | |
| #define CONFIG_SYS_INIT_SP_ADDR \
 | |
| 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 | |
| 
 | |
| /* Memory Test */
 | |
| #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE/2)
 | |
| #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
 | |
| 
 | |
| /* Serial Info */
 | |
| #define CONFIG_MXC_UART
 | |
| #define CONFIG_MXC_UART_BASE	UART1_BASE
 | |
| #define CONFIG_CONS_INDEX	1	/* use UART0 for console */
 | |
| #define CONFIG_BAUDRATE		115200	/* Default baud rate */
 | |
| 
 | |
| /* No NOR flash present */
 | |
| #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
 | |
| #define CONFIG_ENV_SIZE        (8 * 1024)
 | |
| #define CONFIG_SYS_MMC_ENV_DEV		0
 | |
| 
 | |
| #define CONFIG_SYS_NO_FLASH
 | |
| #define CONFIG_ENV_IS_IN_MMC
 | |
| #define CONFIG_SYS_MMC_ENV_DEV 0
 | |
| 
 | |
| /* U-Boot general configuration */
 | |
| #define CONFIG_AUTO_COMPLETE
 | |
| #define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size  */
 | |
| /* Print buffer sz */
 | |
| #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
 | |
| 		sizeof(CONFIG_SYS_PROMPT) + 16)
 | |
| #define CONFIG_SYS_MAXARGS	16	/* max number of command args */
 | |
| /* Boot Argument Buffer Size */
 | |
| #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 | |
| #define CONFIG_CMDLINE_EDITING
 | |
| #define CONFIG_SYS_LONGHELP
 | |
| 
 | |
| /* U-Boot commands */
 | |
| 
 | |
| /* Ethernet */
 | |
| #define CONFIG_FEC_MXC
 | |
| #define CONFIG_FEC_MXC_PHYADDR		0x1f
 | |
| #define CONFIG_MII
 | |
| #define CONFIG_ENV_OVERWRITE
 | |
| 
 | |
| /* ESDHC driver */
 | |
| #define CONFIG_MMC
 | |
| #define CONFIG_GENERIC_MMC
 | |
| #define CONFIG_FSL_ESDHC
 | |
| #define CONFIG_SYS_FSL_ESDHC_ADDR	IMX_MMC_SDHC1_BASE
 | |
| #define CONFIG_SYS_FSL_ESDHC_NUM	1
 | |
| 
 | |
| /* PMIC Configs */
 | |
| #define CONFIG_POWER
 | |
| #define CONFIG_POWER_I2C
 | |
| #define CONFIG_POWER_FSL
 | |
| #define CONFIG_POWER_FSL_MC34704
 | |
| #define CONFIG_SYS_FSL_PMIC_I2C_ADDR	0x54
 | |
| 
 | |
| #define CONFIG_DOS_PARTITION
 | |
| 
 | |
| /* I2C Configs */
 | |
| #define CONFIG_SYS_I2C
 | |
| #define CONFIG_SYS_I2C_MXC
 | |
| #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
 | |
| #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
 | |
| 
 | |
| /* RTC */
 | |
| #define CONFIG_RTC_IMXDI
 | |
| #define CONFIG_CMD_DATE
 | |
| 
 | |
| /* Ethernet Configs */
 | |
| 
 | |
| 
 | |
| #define CONFIG_LOADADDR		0x81000000	/* loadaddr env var */
 | |
| #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 | |
| 
 | |
| #define CONFIG_DEFAULT_FDT_FILE		"imx25-pdk.dtb"
 | |
| 
 | |
| #define CONFIG_EXTRA_ENV_SETTINGS \
 | |
| 	"script=boot.scr\0" \
 | |
| 	"image=zImage\0" \
 | |
| 	"console=ttymxc0\0" \
 | |
| 	"splashpos=m,m\0" \
 | |
| 	"fdt_high=0xffffffff\0" \
 | |
| 	"initrd_high=0xffffffff\0" \
 | |
| 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
 | |
| 	"fdt_addr=0x82000000\0" \
 | |
| 	"boot_fdt=try\0" \
 | |
| 	"ip_dyn=yes\0" \
 | |
| 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 | |
| 	"mmcpart=1\0" \
 | |
| 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 | |
| 	"update_sd_firmware_filename=u-boot.imx\0" \
 | |
| 	"update_sd_firmware=" \
 | |
| 		"if test ${ip_dyn} = yes; then " \
 | |
| 			"setenv get_cmd dhcp; " \
 | |
| 		"else " \
 | |
| 			"setenv get_cmd tftp; " \
 | |
| 		"fi; " \
 | |
| 		"if mmc dev ${mmcdev}; then "	\
 | |
| 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
 | |
| 				"setexpr fw_sz ${filesize} / 0x200; " \
 | |
| 				"setexpr fw_sz ${fw_sz} + 1; "	\
 | |
| 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 | |
| 			"fi; "	\
 | |
| 		"fi\0" \
 | |
| 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 | |
| 		"root=${mmcroot}\0" \
 | |
| 	"loadbootscript=" \
 | |
| 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 | |
| 	"bootscript=echo Running bootscript from mmc ...; " \
 | |
| 		"source\0" \
 | |
| 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 | |
| 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 | |
| 	"mmcboot=echo Booting from mmc ...; " \
 | |
| 		"run mmcargs; " \
 | |
| 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 | |
| 			"if run loadfdt; then " \
 | |
| 				"bootz ${loadaddr} - ${fdt_addr}; " \
 | |
| 			"else " \
 | |
| 				"if test ${boot_fdt} = try; then " \
 | |
| 					"bootz; " \
 | |
| 				"else " \
 | |
| 					"echo WARN: Cannot load the DT; " \
 | |
| 				"fi; " \
 | |
| 			"fi; " \
 | |
| 		"else " \
 | |
| 			"bootz; " \
 | |
| 		"fi;\0" \
 | |
| 	"netargs=setenv bootargs console=${console},${baudrate} " \
 | |
| 		"root=/dev/nfs " \
 | |
| 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 | |
| 		"netboot=echo Booting from net ...; " \
 | |
| 		"run netargs; " \
 | |
| 		"if test ${ip_dyn} = yes; then " \
 | |
| 			"setenv get_cmd dhcp; " \
 | |
| 		"else " \
 | |
| 			"setenv get_cmd tftp; " \
 | |
| 		"fi; " \
 | |
| 		"${get_cmd} ${image}; " \
 | |
| 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 | |
| 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 | |
| 				"bootz ${loadaddr} - ${fdt_addr}; " \
 | |
| 			"else " \
 | |
| 				"if test ${boot_fdt} = try; then " \
 | |
| 					"bootz; " \
 | |
| 				"else " \
 | |
| 					"echo WARN: Cannot load the DT; " \
 | |
| 				"fi; " \
 | |
| 			"fi; " \
 | |
| 		"else " \
 | |
| 			"bootz; " \
 | |
| 		"fi;\0"
 | |
| 
 | |
| #define CONFIG_BOOTCOMMAND \
 | |
| 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
 | |
| 		   "if run loadbootscript; then " \
 | |
| 			   "run bootscript; " \
 | |
| 		   "else " \
 | |
| 			   "if run loadimage; then " \
 | |
| 				   "run mmcboot; " \
 | |
| 			   "else run netboot; " \
 | |
| 			   "fi; " \
 | |
| 		   "fi; " \
 | |
| 	   "else run netboot; fi"
 | |
| 
 | |
| /* Miscellaneous configurable options */
 | |
| #define CONFIG_SYS_LONGHELP
 | |
| #define CONFIG_AUTO_COMPLETE
 | |
| 
 | |
| #define CONFIG_SYS_MAXARGS	       16
 | |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 | |
| 
 | |
| #endif /* __CONFIG_H */
 |