118 lines
3.1 KiB
C
118 lines
3.1 KiB
C
/*
|
|
* Copyright (C) 2005 Arabella Software Ltd.
|
|
* Yuli Barcohen <yuli@arabellasw.com>
|
|
*
|
|
* Support for Embedded Planet EP88x boards.
|
|
* Tested on EP88xC with MPC885 CPU, 64MB SDRAM and 16MB flash.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc8xx.h>
|
|
|
|
/*
|
|
* SDRAM uses two Micron chips.
|
|
* Minimal CPU frequency is 40MHz.
|
|
*/
|
|
static uint sdram_table[] = {
|
|
/* Single read (offset 0x00 in UPM RAM) */
|
|
0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x01B98404,
|
|
0x1FF74C00, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
|
|
|
|
/* Burst read (offset 0x08 in UPM RAM) */
|
|
0xEFCBCC04, 0x0F37C804, 0x0EEEC004, 0x00BDC404,
|
|
0x00FFCC00, 0x00FFCC00, 0x01FB8C00, 0x1FF74C00,
|
|
0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
|
|
0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
|
|
|
|
/* Single write (offset 0x18 in UPM RAM) */
|
|
0xEFCBCC04, 0x0F37C804, 0x0EEE8002, 0x01B90404,
|
|
0x1FF74C05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
|
|
|
|
/* Burst write (offset 0x20 in UPM RAM) */
|
|
0xEFCBCC04, 0x0F37C804, 0x0EEE8000, 0x00BD4400,
|
|
0x00FFCC00, 0x00FFCC02, 0x01FB8C04, 0x1FF74C05,
|
|
0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
|
|
0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05, 0xFFFFCC05,
|
|
|
|
/* Refresh (offset 0x30 in UPM RAM) */
|
|
0xEFFACC04, 0x0FF5CC04, 0x0FFFCC04, 0x1FFFCC04,
|
|
0xFFFFCC05, 0xFFFFCC05, 0xEFFB8C34, 0x0FF74C34,
|
|
0x0FFACCB4, 0x0FF5CC34, 0x0FFFC034, 0x0FFFC0B4,
|
|
|
|
/* Exception (offset 0x3C in UPM RAM) */
|
|
0x0FEA8034, 0x1FB54034, 0xFFFFCC34, 0xFFFFCC05
|
|
};
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
|
|
|
|
bcsr[0] |= 0x0C; /* Turn the LEDs off */
|
|
bcsr[2] |= 0x08; /* Enable flash WE# line - necessary for
|
|
flash detection by CFI driver
|
|
*/
|
|
|
|
#if defined(CONFIG_8xx_CONS_SMC1)
|
|
bcsr[6] |= 0x10; /* Enables RS-232 transceiver */
|
|
#endif
|
|
#if defined(CONFIG_8xx_CONS_SCC2)
|
|
bcsr[7] |= 0x10; /* Enables RS-232 transceiver */
|
|
#endif
|
|
#ifdef CONFIG_ETHER_ON_FEC1
|
|
bcsr[8] |= 0xC0; /* Enable Ethernet 1 PHY */
|
|
#endif
|
|
#ifdef CONFIG_ETHER_ON_FEC2
|
|
bcsr[8] |= 0x30; /* Enable Ethernet 2 PHY */
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long int msize;
|
|
volatile immap_t *immap = (volatile immap_t *)CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
|
|
upmconfig(UPMA, sdram_table, sizeof(sdram_table) / sizeof(uint));
|
|
|
|
/* Configure SDRAM refresh */
|
|
memctl->memc_mptpr = MPTPR_PTP_DIV2; /* BRGCLK/2 */
|
|
|
|
memctl->memc_mamr = (65 << 24) | CONFIG_SYS_MAMR; /* No refresh */
|
|
udelay(100);
|
|
|
|
/* Run MRS pattern from location 0x36 */
|
|
memctl->memc_mar = 0x88;
|
|
memctl->memc_mcr = 0x80002236;
|
|
udelay(100);
|
|
|
|
memctl->memc_mamr |= MAMR_PTAE; /* Enable refresh */
|
|
memctl->memc_or1 = ~(CONFIG_SYS_SDRAM_MAX_SIZE - 1) | OR_CSNT_SAM;
|
|
memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | BR_PS_32 | BR_MS_UPMA | BR_V;
|
|
|
|
msize = get_ram_size(CONFIG_SYS_SDRAM_BASE, CONFIG_SYS_SDRAM_MAX_SIZE);
|
|
memctl->memc_or1 |= ~(msize - 1);
|
|
|
|
return msize;
|
|
}
|
|
|
|
int checkboard( void )
|
|
{
|
|
vu_char *bcsr = (vu_char *)CONFIG_SYS_BCSR;
|
|
|
|
puts("Board: ");
|
|
switch (bcsr[15]) {
|
|
case 0xE7:
|
|
puts("EP88xC 1.0");
|
|
break;
|
|
default:
|
|
printf("unknown ID=%02X", bcsr[15]);
|
|
}
|
|
printf(" CPLD revision %d\n", bcsr[14]);
|
|
|
|
return 0;
|
|
}
|