838 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			838 lines
		
	
	
		
			20 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * (C) Copyright 2001
 | |
|  * Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * flash.c - flash support for the 512k, 8bit boot flash on the GEVB
 | |
|  *           most of this file was based on the existing U-Boot
 | |
|  *           flash drivers.
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <mpc8xx.h>
 | |
| #include <galileo/gt64260R.h>
 | |
| #include <galileo/memory.h>
 | |
| #include "intel_flash.h"
 | |
| 
 | |
| #define FLASH_ROM       0xFFFD       /* unknown flash type                   */
 | |
| #define FLASH_RAM       0xFFFE       /* unknown flash type                   */
 | |
| #define FLASH_MAN_UNKNOWN 0xFFFF0000
 | |
| 
 | |
| /* #define DEBUG */
 | |
| /* #define FLASH_ID_OVERRIDE */	/* Hack to set type to 040B if ROM emulator is installed.
 | |
| 				 * Can be used to program a ROM in circuit if a programmer
 | |
| 				 * is not available by swapping the rom out. */
 | |
| 
 | |
| /* Intel flash commands */
 | |
| int flash_erase_intel(flash_info_t *info, int s_first, int s_last);
 | |
| int write_word_intel(bank_addr_t addr, bank_word_t value);
 | |
| 
 | |
| flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  * Functions
 | |
|  */
 | |
| static ulong flash_get_size (int portwidth, vu_long *addr, flash_info_t *info);
 | |
| static int write_word (flash_info_t *info, ulong dest, ulong data);
 | |
| static void flash_get_offsets (ulong base, flash_info_t *info);
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  */
 | |
| 
 | |
| unsigned long
 | |
| flash_init (void)
 | |
| {
 | |
| 	unsigned int i;
 | |
| 	unsigned long size_b0 = 0, size_b1 = 0;
 | |
| 	unsigned long base, flash_size;
 | |
| 
 | |
| 	/* Init: no FLASHes known */
 | |
| 	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 | |
| 		flash_info[i].flash_id = FLASH_UNKNOWN;
 | |
| 	}
 | |
| 
 | |
| 	/* the boot flash */
 | |
| 	base = CONFIG_SYS_FLASH_BASE;
 | |
| #ifndef CONFIG_SYS_BOOT_FLASH_WIDTH
 | |
| #define CONFIG_SYS_BOOT_FLASH_WIDTH	1
 | |
| #endif
 | |
| 	size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
 | |
| 	                         &flash_info[0]);
 | |
| 
 | |
| #ifndef CONFIG_P3G4
 | |
| 	printf("[");
 | |
| 	print_size (size_b0, "");
 | |
| 	printf("@%08lX] ", base);
 | |
| #endif
 | |
| 
 | |
| 	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
 | |
| 		printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n",
 | |
| 			base, size_b0, size_b0<<20);
 | |
| 	}
 | |
| 
 | |
| 	base = memoryGetDeviceBaseAddress(CONFIG_SYS_EXTRA_FLASH_DEVICE);
 | |
| 	for(i=1;i<CONFIG_SYS_MAX_FLASH_BANKS;i++) {
 | |
| 	    unsigned long size = flash_get_size(CONFIG_SYS_EXTRA_FLASH_WIDTH, (vu_long *)base, &flash_info[i]);
 | |
| 
 | |
| #ifndef CONFIG_P3G4
 | |
| 	    printf("[");
 | |
| 	    print_size (size, "");
 | |
| 	    printf("@%08lX] ", base);
 | |
| #endif
 | |
| 
 | |
| 	    if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 | |
| 		if(i==1) {
 | |
| 		    printf ("## Unknown FLASH at %08lx: Size = 0x%08lx = %ld MB\n",
 | |
| 			    base, size_b1, size_b1<<20);
 | |
| 		}
 | |
| 		break;
 | |
| 	    }
 | |
| 	    size_b1+=size;
 | |
| 	    base+=size;
 | |
| 	}
 | |
| 
 | |
| #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
 | |
| 	/* monitor protection ON by default */
 | |
| 	flash_protect(FLAG_PROTECT_SET,
 | |
| 	              CONFIG_SYS_MONITOR_BASE,
 | |
| 	              CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
 | |
| 	              flash_get_info(CONFIG_SYS_MONITOR_BASE));
 | |
| #endif
 | |
| 
 | |
| #ifdef  CONFIG_ENV_IS_IN_FLASH
 | |
| 	/* ENV protection ON by default */
 | |
| 	flash_protect(FLAG_PROTECT_SET,
 | |
| 	              CONFIG_ENV_ADDR,
 | |
| 	              CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
 | |
| 	              flash_get_info(CONFIG_ENV_ADDR));
 | |
| #endif
 | |
| 
 | |
| 	flash_size = size_b0 + size_b1;
 | |
| 	return flash_size;
 | |
| }
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  */
 | |
| static void
 | |
| flash_get_offsets (ulong base, flash_info_t *info)
 | |
| {
 | |
| 	int i;
 | |
| 	int sector_size;
 | |
| 
 | |
| 	if(!info->sector_count) return;
 | |
| 
 | |
| 	/* set up sector start address table */
 | |
| 	switch(info->flash_id & FLASH_TYPEMASK) {
 | |
| 	    case FLASH_AM040:
 | |
| 	    case FLASH_28F128J3A:
 | |
| 	    case FLASH_28F640J3A:
 | |
| 	    case FLASH_RAM:
 | |
| 		/* this chip has uniformly spaced sectors */
 | |
| 		sector_size=info->size/info->sector_count;
 | |
| 		for (i = 0; i < info->sector_count; i++)
 | |
| 			info->start[i] = base + (i * sector_size);
 | |
| 		break;
 | |
| 	    default:
 | |
| 		if (info->flash_id & FLASH_BTYPE) {
 | |
| 		    /* set sector offsets for bottom boot block type	*/
 | |
| 		    info->start[0] = base + 0x00000000;
 | |
| 		    info->start[1] = base + 0x00008000;
 | |
| 		    info->start[2] = base + 0x0000C000;
 | |
| 		    info->start[3] = base + 0x00010000;
 | |
| 		    for (i = 4; i < info->sector_count; i++) {
 | |
| 			    info->start[i] = base + (i * 0x00020000) - 0x00060000;
 | |
| 		    }
 | |
| 		} else {
 | |
| 		    /* set sector offsets for top boot block type		*/
 | |
| 		    i = info->sector_count - 1;
 | |
| 		    info->start[i--] = base + info->size - 0x00008000;
 | |
| 		    info->start[i--] = base + info->size - 0x0000C000;
 | |
| 		    info->start[i--] = base + info->size - 0x00010000;
 | |
| 		    for (; i >= 0; i--) {
 | |
| 			    info->start[i] = base + i * 0x00020000;
 | |
| 		    }
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  */
 | |
| 
 | |
| flash_info_t *flash_get_info(ulong base)
 | |
| {
 | |
| 	int i;
 | |
| 	flash_info_t * info;
 | |
| 
 | |
| 	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i ++) {
 | |
| 		info = & flash_info[i];
 | |
| 		if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
 | |
| 			break;
 | |
| 	}
 | |
| 
 | |
| 	return i == CONFIG_SYS_MAX_FLASH_BANKS ? 0 : info;
 | |
| }
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  */
 | |
| void
 | |
| flash_print_info  (flash_info_t *info)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	if (info->flash_id == FLASH_UNKNOWN) {
 | |
| 		printf ("missing or unknown FLASH type\n");
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	switch (info->flash_id & FLASH_VENDMASK) {
 | |
| 	case FLASH_MAN_AMD:	printf ("AMD ");		break;
 | |
| 	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
 | |
| 	case FLASH_MAN_INTEL:	printf ("INTEL ");		break;
 | |
| 	default:		printf ("Unknown Vendor ");	break;
 | |
| 	}
 | |
| 
 | |
| 	switch (info->flash_id & FLASH_TYPEMASK) {
 | |
| 	case FLASH_AM040:
 | |
| 		printf ("AM29LV040B (4 Mbit, bottom boot sect)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM400B:
 | |
| 		printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM400T:
 | |
| 		printf ("AM29LV400T (4 Mbit, top boot sector)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM800B:
 | |
| 		printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM800T:
 | |
| 		printf ("AM29LV800T (8 Mbit, top boot sector)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM160B:
 | |
| 		printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM160T:
 | |
| 		printf ("AM29LV160T (16 Mbit, top boot sector)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM320B:
 | |
| 		printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
 | |
| 		break;
 | |
| 	case FLASH_AM320T:
 | |
| 		printf ("AM29LV320T (32 Mbit, top boot sector)\n");
 | |
| 		break;
 | |
| 	case FLASH_28F640J3A:
 | |
| 		printf ("28F640J3A (64 Mbit)\n");
 | |
| 		break;
 | |
| 	case FLASH_28F128J3A:
 | |
| 		printf ("28F128J3A (128 Mbit)\n");
 | |
| 		break;
 | |
| 	case FLASH_ROM:
 | |
| 		printf ("ROM\n");
 | |
| 		break;
 | |
| 	case FLASH_RAM:
 | |
| 		printf ("RAM\n");
 | |
| 		break;
 | |
| 	default:
 | |
| 		printf ("Unknown Chip Type\n");
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| 	puts ("  Size: ");
 | |
| 	print_size (info->size, "");
 | |
| 	printf (" in %d Sectors\n", info->sector_count);
 | |
| 
 | |
| 	printf ("  Sector Start Addresses:");
 | |
| 	for (i=0; i<info->sector_count; ++i) {
 | |
| 		if ((i % 5) == 0)
 | |
| 			printf ("\n   ");
 | |
| 		printf (" %08lX%s",
 | |
| 			info->start[i],
 | |
| 			info->protect[i] ? " (RO)" : "     "
 | |
| 		);
 | |
| 	}
 | |
| 	printf ("\n");
 | |
| 	return;
 | |
| }
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  */
 | |
| 
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  */
 | |
| 
 | |
| /*
 | |
|  * The following code cannot be run from FLASH!
 | |
|  */
 | |
| 
 | |
| static inline void flash_cmd(int width, volatile unsigned char *addr, int offset, unsigned char cmd)
 | |
| {
 | |
| 	/* supports 1x8, 1x16, and 2x16 */
 | |
| 	/* 2x8 and 4x8 are not supported */
 | |
| 	if(width==4) {
 | |
| 	    /* assuming chips are in 16 bit mode */
 | |
| 	    /* 2x16 */
 | |
| 	    unsigned long cmd32=(cmd<<16)|cmd;
 | |
| 	    *(volatile unsigned long *)(addr+offset*2)=cmd32;
 | |
| 	} else if (width == 2) {
 | |
| 	    /* 1x16 */
 | |
| 	    *(volatile unsigned short *)((unsigned short*)addr+offset)=cmd;
 | |
| 	} else {
 | |
| 	    /* 1x8 */
 | |
| 	    *(volatile unsigned char *)(addr+offset)=cmd;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| static ulong
 | |
| flash_get_size (int portwidth, vu_long *addr, flash_info_t *info)
 | |
| {
 | |
| 	short i;
 | |
| 	volatile unsigned char *caddr = (unsigned char *)addr;
 | |
| 	volatile unsigned short *saddr = (unsigned short *)addr;
 | |
| 	volatile unsigned long *laddr = (unsigned long *)addr;
 | |
| 	char old[2], save;
 | |
| 	ulong id, manu, base = (ulong)addr;
 | |
| 
 | |
| 	info->portwidth=portwidth;
 | |
| 
 | |
| 	save = *caddr;
 | |
| 
 | |
| 	flash_cmd(portwidth,caddr,0,0xf0);
 | |
| 	flash_cmd(portwidth,caddr,0,0xf0);
 | |
| 
 | |
| 	udelay(10);
 | |
| 
 | |
| 	old[0] = caddr[0];
 | |
| 	old[1] = caddr[1];
 | |
| 
 | |
| 
 | |
| 	if(old[0]!=0xf0) {
 | |
| 	    flash_cmd(portwidth,caddr,0,0xf0);
 | |
| 	    flash_cmd(portwidth,caddr,0,0xf0);
 | |
| 
 | |
| 	    udelay(10);
 | |
| 
 | |
| 	    if(*caddr==0xf0) {
 | |
| 		/* this area is ROM */
 | |
| 		*caddr=save;
 | |
| #ifndef FLASH_ID_OVERRIDE
 | |
| 		info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
 | |
| 		info->sector_count = 8;
 | |
| 		info->size = 0x80000;
 | |
| #else
 | |
| 		info->flash_id = FLASH_MAN_AMD + FLASH_AM040;
 | |
| 		info->sector_count = 8;
 | |
| 		info->size = 0x80000;
 | |
| 		info->chipwidth=1;
 | |
| #endif
 | |
| 		flash_get_offsets(base, info);
 | |
| 		return info->size;
 | |
| 	    }
 | |
| 	} else {
 | |
| 	    *caddr=0;
 | |
| 
 | |
| 	    udelay(10);
 | |
| 
 | |
| 	    if(*caddr==0) {
 | |
| 		/* this area is RAM */
 | |
| 		*caddr=save;
 | |
| 		info->flash_id = FLASH_RAM + FLASH_MAN_UNKNOWN;
 | |
| 		info->sector_count = 8;
 | |
| 		info->size = 0x80000;
 | |
| 		flash_get_offsets(base, info);
 | |
| 		return info->size;
 | |
| 	    }
 | |
| 	    flash_cmd(portwidth,caddr,0,0xf0);
 | |
| 
 | |
| 	    udelay(10);
 | |
| 	}
 | |
| 
 | |
| 	/* Write auto select command: read Manufacturer ID */
 | |
| 	flash_cmd(portwidth,caddr,0x555,0xAA);
 | |
| 	flash_cmd(portwidth,caddr,0x2AA,0x55);
 | |
| 	flash_cmd(portwidth,caddr,0x555,0x90);
 | |
| 
 | |
| 	udelay(10);
 | |
| 
 | |
| 	if ((caddr[0] == old[0]) &&
 | |
| 	    (caddr[1] == old[1])) {
 | |
| 
 | |
| 	    /* this area is ROM */
 | |
| #ifndef FLASH_ID_OVERRIDE
 | |
| 	    info->flash_id = FLASH_ROM + FLASH_MAN_UNKNOWN;
 | |
| 	    info->sector_count = 8;
 | |
| 	    info->size = 0x80000;
 | |
| #else
 | |
| 		info->flash_id = FLASH_MAN_AMD + FLASH_AM040;
 | |
| 		info->sector_count = 8;
 | |
| 		info->size = 0x80000;
 | |
| 		info->chipwidth=1;
 | |
| #endif
 | |
| 	    flash_get_offsets(base, info);
 | |
| 	    return info->size;
 | |
| #ifdef DEBUG
 | |
| 	} else {
 | |
| 	    printf("%px%d: %02x:%02x -> %02x:%02x\n",
 | |
| 		    caddr, portwidth, old[0], old[1],
 | |
| 		    caddr[0], caddr[1]);
 | |
| #endif
 | |
| 	}
 | |
| 
 | |
| 	switch(portwidth) {
 | |
| 	    case 1:
 | |
| 		manu = caddr[0];
 | |
| 		manu |= manu<<16;
 | |
| 		id = caddr[1];
 | |
| 		break;
 | |
| 	    case 2:
 | |
| 		manu = saddr[0];
 | |
| 		manu |= manu<<16;
 | |
| 		id = saddr[1];
 | |
| 		id |= id<<16;
 | |
| 		break;
 | |
| 	    case 4:
 | |
| 		manu = laddr[0];
 | |
| 		id = laddr[1];
 | |
| 		break;
 | |
| 	default:
 | |
| 		id = manu = -1;
 | |
| 		break;
 | |
| 	}
 | |
| 
 | |
| #ifdef DEBUG
 | |
| 	printf("\n%08lx:%08lx:%08lx\n", base, manu, id);
 | |
| 	printf("%08lx %08lx %08lx %08lx\n",
 | |
| 		laddr[0],laddr[1],laddr[2],laddr[3]);
 | |
| #endif
 | |
| 
 | |
| 	switch (manu) {
 | |
| 	    case AMD_MANUFACT:
 | |
| 		    info->flash_id = FLASH_MAN_AMD;
 | |
| 		    break;
 | |
| 	    case FUJ_MANUFACT:
 | |
| 		    info->flash_id = FLASH_MAN_FUJ;
 | |
| 		    break;
 | |
| 	    case INTEL_MANUFACT:
 | |
| 		    info->flash_id = FLASH_MAN_INTEL;
 | |
| 		    break;
 | |
| 	    default:
 | |
| 		    printf("Unknown Mfr [%08lx]:%08lx\n", manu, id);
 | |
| 		    info->flash_id = FLASH_UNKNOWN;
 | |
| 		    info->sector_count = 0;
 | |
| 		    info->size = 0;
 | |
| 		    return (0);			/* no or unknown flash	*/
 | |
| 	}
 | |
| 
 | |
| 	switch (id) {
 | |
| 	    case AMD_ID_LV400T:
 | |
| 		    info->flash_id += FLASH_AM400T;
 | |
| 		    info->sector_count = 11;
 | |
| 		    info->size = 0x00100000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;				/* => 1 MB	*/
 | |
| 
 | |
| 	    case AMD_ID_LV400B:
 | |
| 		    info->flash_id += FLASH_AM400B;
 | |
| 		    info->sector_count = 11;
 | |
| 		    info->size = 0x00100000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;				/* => 1 MB	*/
 | |
| 
 | |
| 	    case AMD_ID_LV800T:
 | |
| 		    info->flash_id += FLASH_AM800T;
 | |
| 		    info->sector_count = 19;
 | |
| 		    info->size = 0x00200000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;				/* => 2 MB	*/
 | |
| 
 | |
| 	    case AMD_ID_LV800B:
 | |
| 		    info->flash_id += FLASH_AM800B;
 | |
| 		    info->sector_count = 19;
 | |
| 		    info->size = 0x00200000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;				/* => 2 MB	*/
 | |
| 
 | |
| 	    case AMD_ID_LV160T:
 | |
| 		    info->flash_id += FLASH_AM160T;
 | |
| 		    info->sector_count = 35;
 | |
| 		    info->size = 0x00400000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;				/* => 4 MB	*/
 | |
| 
 | |
| 	    case AMD_ID_LV160B:
 | |
| 		    info->flash_id += FLASH_AM160B;
 | |
| 		    info->sector_count = 35;
 | |
| 		    info->size = 0x00400000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;				/* => 4 MB	*/
 | |
| #if 0	/* enable when device IDs are available */
 | |
| 	    case AMD_ID_LV320T:
 | |
| 		    info->flash_id += FLASH_AM320T;
 | |
| 		    info->sector_count = 67;
 | |
| 		    info->size = 0x00800000;
 | |
| 		    break;				/* => 8 MB	*/
 | |
| 
 | |
| 	    case AMD_ID_LV320B:
 | |
| 		    info->flash_id += FLASH_AM320B;
 | |
| 		    info->sector_count = 67;
 | |
| 		    info->size = 0x00800000;
 | |
| 		    break;				/* => 8 MB	*/
 | |
| #endif
 | |
| 	    case AMD_ID_LV040B:
 | |
| 		    info->flash_id += FLASH_AM040;
 | |
| 		    info->sector_count = 8;
 | |
| 		    info->size = 0x80000;
 | |
| 		    info->chipwidth=1;
 | |
| 		    break;
 | |
| 
 | |
| 	    case INTEL_ID_28F640J3A:
 | |
| 		    info->flash_id += FLASH_28F640J3A;
 | |
| 		    info->sector_count = 64;
 | |
| 		    info->size = 128*1024 * 64; /* 128kbytes x 64 blocks */
 | |
| 		    info->chipwidth=2;
 | |
| 		    if(portwidth==4) info->size*=2;	/* 2x16 */
 | |
| 		    break;
 | |
| 
 | |
| 	    case INTEL_ID_28F128J3A:
 | |
| 		    info->flash_id += FLASH_28F128J3A;
 | |
| 		    info->sector_count = 128;
 | |
| 		    info->size = 128*1024 * 128; /* 128kbytes x 128 blocks */
 | |
| 		    info->chipwidth=2;
 | |
| 		    if(portwidth==4) info->size*=2;	/* 2x16 */
 | |
| 		    break;
 | |
| 
 | |
| 	    default:
 | |
| 		    printf("Unknown id %lx:[%lx]\n", manu, id);
 | |
| 		    info->flash_id = FLASH_UNKNOWN;
 | |
| 		    info->chipwidth=1;
 | |
| 		    return (0);			/* => no or unknown flash */
 | |
| 
 | |
| 	}
 | |
| 
 | |
| 	flash_get_offsets(base, info);
 | |
| 
 | |
| #if 0
 | |
| 	/* set up sector start address table */
 | |
| 	if (info->flash_id & FLASH_AM040) {
 | |
| 		/* this chip has uniformly spaced sectors */
 | |
| 		for (i = 0; i < info->sector_count; i++)
 | |
| 			info->start[i] = base + (i * 0x00010000);
 | |
| 
 | |
| 	} else if (info->flash_id & FLASH_BTYPE) {
 | |
| 		/* set sector offsets for bottom boot block type	*/
 | |
| 		info->start[0] = base + 0x00000000;
 | |
| 		info->start[1] = base + 0x00008000;
 | |
| 		info->start[2] = base + 0x0000C000;
 | |
| 		info->start[3] = base + 0x00010000;
 | |
| 		for (i = 4; i < info->sector_count; i++) {
 | |
| 			info->start[i] = base + (i * 0x00020000) - 0x00060000;
 | |
| 		}
 | |
| 	} else {
 | |
| 		/* set sector offsets for top boot block type		*/
 | |
| 		i = info->sector_count - 1;
 | |
| 		info->start[i--] = base + info->size - 0x00008000;
 | |
| 		info->start[i--] = base + info->size - 0x0000C000;
 | |
| 		info->start[i--] = base + info->size - 0x00010000;
 | |
| 		for (; i >= 0; i--) {
 | |
| 			info->start[i] = base + i * 0x00020000;
 | |
| 		}
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	/* check for protected sectors */
 | |
| 	for (i = 0; i < info->sector_count; i++) {
 | |
| 		/* read sector protection at sector address, (A7 .. A0)=0x02 */
 | |
| 		/* D0 = 1 if protected */
 | |
| 		caddr = (volatile unsigned char *)(info->start[i]);
 | |
| 		saddr = (volatile unsigned short *)(info->start[i]);
 | |
| 		laddr = (volatile unsigned long *)(info->start[i]);
 | |
| 		if(portwidth==1)
 | |
| 		    info->protect[i] = caddr[2] & 1;
 | |
| 		else if(portwidth==2)
 | |
| 		    info->protect[i] = saddr[2] & 1;
 | |
| 		else
 | |
| 		    info->protect[i] = laddr[2] & 1;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * Prevent writes to uninitialized FLASH.
 | |
| 	 */
 | |
| 	if (info->flash_id != FLASH_UNKNOWN) {
 | |
| 		caddr = (volatile unsigned char *)info->start[0];
 | |
| 
 | |
| 		flash_cmd(portwidth,caddr,0,0xF0);	/* reset bank */
 | |
| 	}
 | |
| 
 | |
| 	return (info->size);
 | |
| }
 | |
| 
 | |
| /* TODO: 2x16 unsupported */
 | |
| int
 | |
| flash_erase (flash_info_t *info, int s_first, int s_last)
 | |
| {
 | |
| 	volatile unsigned char *addr = (uchar *)(info->start[0]);
 | |
| 	int flag, prot, sect, l_sect;
 | |
| 	ulong start, now, last;
 | |
| 
 | |
| 	/* TODO: 2x16 unsupported */
 | |
| 	if(info->portwidth==4) return 1;
 | |
| 
 | |
| 	if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1;
 | |
| 	if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
 | |
| 	    for (sect = s_first; sect<=s_last; sect++) {
 | |
| 		int sector_size=info->size/info->sector_count;
 | |
| 		addr = (uchar *)(info->start[sect]);
 | |
| 		memset((void *)addr, 0, sector_size);
 | |
| 	    }
 | |
| 	    return 0;
 | |
| 	}
 | |
| 
 | |
| 	if ((s_first < 0) || (s_first > s_last)) {
 | |
| 		if (info->flash_id == FLASH_UNKNOWN) {
 | |
| 			printf ("- missing\n");
 | |
| 		} else {
 | |
| 			printf ("- no sectors to erase\n");
 | |
| 		}
 | |
| 		return 1;
 | |
| 	}
 | |
| 
 | |
| 	if ((info->flash_id&FLASH_VENDMASK) == FLASH_MAN_INTEL)  {
 | |
| 		return flash_erase_intel(info,
 | |
| 				(unsigned short)s_first,
 | |
| 				(unsigned short)s_last);
 | |
| 	}
 | |
| 
 | |
| #if 0
 | |
| 	if ((info->flash_id == FLASH_UNKNOWN) ||
 | |
| 	    (info->flash_id > FLASH_AMD_COMP)) {
 | |
| 		printf ("Can't erase unknown flash type %08lx - aborted\n",
 | |
| 			info->flash_id);
 | |
| 		return 1;
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	prot = 0;
 | |
| 	for (sect=s_first; sect<=s_last; ++sect) {
 | |
| 		if (info->protect[sect]) {
 | |
| 			prot++;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	if (prot) {
 | |
| 		printf ("- Warning: %d protected sectors will not be erased!\n",
 | |
| 			prot);
 | |
| 	} else {
 | |
| 		printf ("\n");
 | |
| 	}
 | |
| 
 | |
| 	l_sect = -1;
 | |
| 
 | |
| 	/* Disable interrupts which might cause a timeout here */
 | |
| 	flag = disable_interrupts();
 | |
| 
 | |
| 	flash_cmd(info->portwidth,addr,0x555,0xAA);
 | |
| 	flash_cmd(info->portwidth,addr,0x2AA,0x55);
 | |
| 	flash_cmd(info->portwidth,addr,0x555,0x80);
 | |
| 	flash_cmd(info->portwidth,addr,0x555,0xAA);
 | |
| 	flash_cmd(info->portwidth,addr,0x2AA,0x55);
 | |
| 
 | |
| 	/* Start erase on unprotected sectors */
 | |
| 	for (sect = s_first; sect<=s_last; sect++) {
 | |
| 		if (info->protect[sect] == 0) {	/* not protected */
 | |
| 			addr = (uchar *)(info->start[sect]);
 | |
| 			flash_cmd(info->portwidth,addr,0,0x30);
 | |
| 			l_sect = sect;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	/* re-enable interrupts if necessary */
 | |
| 	if (flag)
 | |
| 		enable_interrupts();
 | |
| 
 | |
| 	/* wait at least 80us - let's wait 1 ms */
 | |
| 	udelay (1000);
 | |
| 
 | |
| 	/*
 | |
| 	 * We wait for the last triggered sector
 | |
| 	 */
 | |
| 	if (l_sect < 0)
 | |
| 		goto DONE;
 | |
| 
 | |
| 	start = get_timer (0);
 | |
| 	last  = start;
 | |
| 	addr = (volatile unsigned char *)(info->start[l_sect]);
 | |
| 	/* broken for 2x16: TODO */
 | |
| 	while ((addr[0] & 0x80) != 0x80) {
 | |
| 		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 | |
| 			printf ("Timeout\n");
 | |
| 			return 1;
 | |
| 		}
 | |
| 		/* show that we're waiting */
 | |
| 		if ((now - last) > 1000) {	/* every second */
 | |
| 			putc ('.');
 | |
| 			last = now;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| DONE:
 | |
| 	/* reset to read mode */
 | |
| 	addr = (volatile unsigned char *)info->start[0];
 | |
| 	flash_cmd(info->portwidth,addr,0,0xf0);
 | |
| 	flash_cmd(info->portwidth,addr,0,0xf0);
 | |
| 
 | |
| 	printf (" done\n");
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  * Copy memory to flash, returns:
 | |
|  * 0 - OK
 | |
|  * 1 - write timeout
 | |
|  * 2 - Flash not erased
 | |
|  */
 | |
| 
 | |
| /* broken for 2x16: TODO */
 | |
| int
 | |
| write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
 | |
| {
 | |
| 	ulong cp, wp, data;
 | |
| 	int i, l, rc;
 | |
| 
 | |
| 	if(info->portwidth==4) return 1;
 | |
| 
 | |
| 	if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 0;
 | |
| 	if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
 | |
| 	    memcpy((void *)addr, src, cnt);
 | |
| 	    return 0;
 | |
| 	}
 | |
| 
 | |
| 	wp = (addr & ~3);	/* get lower word aligned address */
 | |
| 
 | |
| 	/*
 | |
| 	 * handle unaligned start bytes
 | |
| 	 */
 | |
| 	if ((l = addr - wp) != 0) {
 | |
| 		data = 0;
 | |
| 		for (i=0, cp=wp; i<l; ++i, ++cp) {
 | |
| 			data = (data << 8) | (*(uchar *)cp);
 | |
| 		}
 | |
| 		for (; i<4 && cnt>0; ++i) {
 | |
| 			data = (data << 8) | *src++;
 | |
| 			--cnt;
 | |
| 			++cp;
 | |
| 		}
 | |
| 		for (; cnt==0 && i<4; ++i, ++cp) {
 | |
| 			data = (data << 8) | (*(uchar *)cp);
 | |
| 		}
 | |
| 
 | |
| 		if ((rc = write_word(info, wp, data)) != 0) {
 | |
| 			return (rc);
 | |
| 		}
 | |
| 		wp += 4;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * handle word aligned part
 | |
| 	 */
 | |
| 	while (cnt >= 4) {
 | |
| 		data = 0;
 | |
| 		for (i=0; i<4; ++i) {
 | |
| 			data = (data << 8) | *src++;
 | |
| 		}
 | |
| 		if ((rc = write_word(info, wp, data)) != 0) {
 | |
| 			return (rc);
 | |
| 		}
 | |
| 		wp  += 4;
 | |
| 		cnt -= 4;
 | |
| 	}
 | |
| 
 | |
| 	if (cnt == 0) {
 | |
| 		return (0);
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * handle unaligned tail bytes
 | |
| 	 */
 | |
| 	data = 0;
 | |
| 	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
 | |
| 		data = (data << 8) | *src++;
 | |
| 		--cnt;
 | |
| 	}
 | |
| 	for (; i<4; ++i, ++cp) {
 | |
| 		data = (data << 8) | (*(uchar *)cp);
 | |
| 	}
 | |
| 
 | |
| 	return (write_word(info, wp, data));
 | |
| }
 | |
| 
 | |
| /*-----------------------------------------------------------------------
 | |
|  * Write a word to Flash, returns:
 | |
|  * 0 - OK
 | |
|  * 1 - write timeout
 | |
|  * 2 - Flash not erased
 | |
|  */
 | |
| /* broken for 2x16: TODO */
 | |
| static int
 | |
| write_word (flash_info_t *info, ulong dest, ulong data)
 | |
| {
 | |
| 	volatile unsigned char *addr = (uchar *)(info->start[0]);
 | |
| 	ulong start;
 | |
| 	int flag, i;
 | |
| 
 | |
| 	if(info->portwidth==4) return 1;
 | |
| 
 | |
| 	if((info->flash_id & FLASH_TYPEMASK) == FLASH_ROM) return 1;
 | |
| 	if((info->flash_id & FLASH_TYPEMASK) == FLASH_RAM) {
 | |
| 	    *(unsigned long *)dest=data;
 | |
| 	    return 0;
 | |
| 	}
 | |
| 	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)  {
 | |
| 		unsigned short low = data & 0xffff;
 | |
| 		unsigned short hi  = (data >> 16) & 0xffff;
 | |
| 		int ret = write_word_intel((bank_addr_t)dest, hi);
 | |
| 
 | |
| 		if (!ret) ret = write_word_intel((bank_addr_t)(dest+2), low);
 | |
| 
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* Check if Flash is (sufficiently) erased */
 | |
| 	if ((*((vu_long *)dest) & data) != data) {
 | |
| 		return (2);
 | |
| 	}
 | |
| 	/* Disable interrupts which might cause a timeout here */
 | |
| 	flag = disable_interrupts();
 | |
| 
 | |
| 	/* first, perform an unlock bypass command to speed up flash writes */
 | |
| 	addr[0x555] = 0xAA;
 | |
| 	addr[0x2AA] = 0x55;
 | |
| 	addr[0x555] = 0x20;
 | |
| 
 | |
| 	/* write each byte out */
 | |
| 	for (i = 0; i < 4; i++) {
 | |
| 		char *data_ch = (char *)&data;
 | |
| 		addr[0] = 0xA0;
 | |
| 		*(((char *)dest)+i) = data_ch[i];
 | |
| 		udelay(10); /* XXX */
 | |
| 	}
 | |
| 
 | |
| 	/* we're done, now do an unlock bypass reset */
 | |
| 	addr[0] = 0x90;
 | |
| 	addr[0] = 0x00;
 | |
| 
 | |
| 	/* re-enable interrupts if necessary */
 | |
| 	if (flag)
 | |
| 		enable_interrupts();
 | |
| 
 | |
| 	/* data polling for D7 */
 | |
| 	start = get_timer (0);
 | |
| 	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
 | |
| 		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 | |
| 			return (1);
 | |
| 		}
 | |
| 	}
 | |
| 	return (0);
 | |
| }
 |