539 lines
16 KiB
C
539 lines
16 KiB
C
/*
|
|
* rtl8139.c : U-Boot driver for the RealTek RTL8139
|
|
*
|
|
* Masami Komiya (mkomiya@sonare.it)
|
|
*
|
|
* Most part is taken from rtl8139.c of etherboot
|
|
*
|
|
*/
|
|
|
|
/* rtl8139.c - etherboot driver for the Realtek 8139 chipset
|
|
|
|
ported from the linux driver written by Donald Becker
|
|
by Rainer Bawidamann (Rainer.Bawidamann@informatik.uni-ulm.de) 1999
|
|
|
|
This software may be used and distributed according to the terms
|
|
of the GNU Public License, incorporated herein by reference.
|
|
|
|
changes to the original driver:
|
|
- removed support for interrupts, switching to polling mode (yuck!)
|
|
- removed support for the 8129 chip (external MII)
|
|
|
|
*/
|
|
|
|
/*********************************************************************/
|
|
/* Revision History */
|
|
/*********************************************************************/
|
|
|
|
/*
|
|
28 Dec 2002 ken_yap@users.sourceforge.net (Ken Yap)
|
|
Put in virt_to_bus calls to allow Etherboot relocation.
|
|
|
|
06 Apr 2001 ken_yap@users.sourceforge.net (Ken Yap)
|
|
Following email from Hyun-Joon Cha, added a disable routine, otherwise
|
|
NIC remains live and can crash the kernel later.
|
|
|
|
4 Feb 2000 espenlaub@informatik.uni-ulm.de (Klaus Espenlaub)
|
|
Shuffled things around, removed the leftovers from the 8129 support
|
|
that was in the Linux driver and added a bit more 8139 definitions.
|
|
Moved the 8K receive buffer to a fixed, available address outside the
|
|
0x98000-0x9ffff range. This is a bit of a hack, but currently the only
|
|
way to make room for the Etherboot features that need substantial amounts
|
|
of code like the ANSI console support. Currently the buffer is just below
|
|
0x10000, so this even conforms to the tagged boot image specification,
|
|
which reserves the ranges 0x00000-0x10000 and 0x98000-0xA0000. My
|
|
interpretation of this "reserved" is that Etherboot may do whatever it
|
|
likes, as long as its environment is kept intact (like the BIOS
|
|
variables). Hopefully fixed rtl_poll() once and for all. The symptoms
|
|
were that if Etherboot was left at the boot menu for several minutes, the
|
|
first eth_poll failed. Seems like I am the only person who does this.
|
|
First of all I fixed the debugging code and then set out for a long bug
|
|
hunting session. It took me about a week full time work - poking around
|
|
various places in the driver, reading Don Becker's and Jeff Garzik's Linux
|
|
driver and even the FreeBSD driver (what a piece of crap!) - and
|
|
eventually spotted the nasty thing: the transmit routine was acknowledging
|
|
each and every interrupt pending, including the RxOverrun and RxFIFIOver
|
|
interrupts. This confused the RTL8139 thoroughly. It destroyed the
|
|
Rx ring contents by dumping the 2K FIFO contents right where we wanted to
|
|
get the next packet. Oh well, what fun.
|
|
|
|
18 Jan 2000 mdc@thinguin.org (Marty Connor)
|
|
Drastically simplified error handling. Basically, if any error
|
|
in transmission or reception occurs, the card is reset.
|
|
Also, pointed all transmit descriptors to the same buffer to
|
|
save buffer space. This should decrease driver size and avoid
|
|
corruption because of exceeding 32K during runtime.
|
|
|
|
28 Jul 1999 (Matthias Meixner - meixner@rbg.informatik.tu-darmstadt.de)
|
|
rtl_poll was quite broken: it used the RxOK interrupt flag instead
|
|
of the RxBufferEmpty flag which often resulted in very bad
|
|
transmission performace - below 1kBytes/s.
|
|
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
#include <pci.h>
|
|
|
|
#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI) && \
|
|
defined(CONFIG_RTL8139)
|
|
|
|
#define TICKS_PER_SEC CFG_HZ
|
|
#define TICKS_PER_MS (TICKS_PER_SEC/1000)
|
|
|
|
#define RTL_TIMEOUT (1*TICKS_PER_SEC)
|
|
|
|
#define ETH_FRAME_LEN 1514
|
|
#define ETH_ALEN 6
|
|
#define ETH_ZLEN 60
|
|
|
|
/* PCI Tuning Parameters
|
|
Threshold is bytes transferred to chip before transmission starts. */
|
|
#define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
|
|
#define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */
|
|
#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */
|
|
#define TX_DMA_BURST 4 /* Calculate as 16<<val. */
|
|
#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */
|
|
#define TX_BUF_SIZE ETH_FRAME_LEN /* FCS is added by the chip */
|
|
#define RX_BUF_LEN_IDX 0 /* 0, 1, 2 is allowed - 8,16,32K rx buffer */
|
|
#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
|
|
|
|
#undef DEBUG_TX
|
|
#undef DEBUG_RX
|
|
|
|
#define currticks() get_timer(0)
|
|
#define bus_to_phys(a) pci_mem_to_phys((pci_dev_t)dev->priv, a)
|
|
#define phys_to_bus(a) pci_phys_to_mem((pci_dev_t)dev->priv, a)
|
|
|
|
/* Symbolic offsets to registers. */
|
|
enum RTL8139_registers {
|
|
MAC0=0, /* Ethernet hardware address. */
|
|
MAR0=8, /* Multicast filter. */
|
|
TxStatus0=0x10, /* Transmit status (four 32bit registers). */
|
|
TxAddr0=0x20, /* Tx descriptors (also four 32bit). */
|
|
RxBuf=0x30, RxEarlyCnt=0x34, RxEarlyStatus=0x36,
|
|
ChipCmd=0x37, RxBufPtr=0x38, RxBufAddr=0x3A,
|
|
IntrMask=0x3C, IntrStatus=0x3E,
|
|
TxConfig=0x40, RxConfig=0x44,
|
|
Timer=0x48, /* general-purpose counter. */
|
|
RxMissed=0x4C, /* 24 bits valid, write clears. */
|
|
Cfg9346=0x50, Config0=0x51, Config1=0x52,
|
|
TimerIntrReg=0x54, /* intr if gp counter reaches this value */
|
|
MediaStatus=0x58,
|
|
Config3=0x59,
|
|
MultiIntr=0x5C,
|
|
RevisionID=0x5E, /* revision of the RTL8139 chip */
|
|
TxSummary=0x60,
|
|
MII_BMCR=0x62, MII_BMSR=0x64, NWayAdvert=0x66, NWayLPAR=0x68,
|
|
NWayExpansion=0x6A,
|
|
DisconnectCnt=0x6C, FalseCarrierCnt=0x6E,
|
|
NWayTestReg=0x70,
|
|
RxCnt=0x72, /* packet received counter */
|
|
CSCR=0x74, /* chip status and configuration register */
|
|
PhyParm1=0x78,TwisterParm=0x7c,PhyParm2=0x80, /* undocumented */
|
|
/* from 0x84 onwards are a number of power management/wakeup frame
|
|
* definitions we will probably never need to know about. */
|
|
};
|
|
|
|
enum ChipCmdBits {
|
|
CmdReset=0x10, CmdRxEnb=0x08, CmdTxEnb=0x04, RxBufEmpty=0x01, };
|
|
|
|
/* Interrupt register bits, using my own meaningful names. */
|
|
enum IntrStatusBits {
|
|
PCIErr=0x8000, PCSTimeout=0x4000, CableLenChange= 0x2000,
|
|
RxFIFOOver=0x40, RxUnderrun=0x20, RxOverflow=0x10,
|
|
TxErr=0x08, TxOK=0x04, RxErr=0x02, RxOK=0x01,
|
|
};
|
|
enum TxStatusBits {
|
|
TxHostOwns=0x2000, TxUnderrun=0x4000, TxStatOK=0x8000,
|
|
TxOutOfWindow=0x20000000, TxAborted=0x40000000,
|
|
TxCarrierLost=0x80000000,
|
|
};
|
|
enum RxStatusBits {
|
|
RxMulticast=0x8000, RxPhysical=0x4000, RxBroadcast=0x2000,
|
|
RxBadSymbol=0x0020, RxRunt=0x0010, RxTooLong=0x0008, RxCRCErr=0x0004,
|
|
RxBadAlign=0x0002, RxStatusOK=0x0001,
|
|
};
|
|
|
|
enum MediaStatusBits {
|
|
MSRTxFlowEnable=0x80, MSRRxFlowEnable=0x40, MSRSpeed10=0x08,
|
|
MSRLinkFail=0x04, MSRRxPauseFlag=0x02, MSRTxPauseFlag=0x01,
|
|
};
|
|
|
|
enum MIIBMCRBits {
|
|
BMCRReset=0x8000, BMCRSpeed100=0x2000, BMCRNWayEnable=0x1000,
|
|
BMCRRestartNWay=0x0200, BMCRDuplex=0x0100,
|
|
};
|
|
|
|
enum CSCRBits {
|
|
CSCR_LinkOKBit=0x0400, CSCR_LinkChangeBit=0x0800,
|
|
CSCR_LinkStatusBits=0x0f000, CSCR_LinkDownOffCmd=0x003c0,
|
|
CSCR_LinkDownCmd=0x0f3c0,
|
|
};
|
|
|
|
/* Bits in RxConfig. */
|
|
enum rx_mode_bits {
|
|
RxCfgWrap=0x80,
|
|
AcceptErr=0x20, AcceptRunt=0x10, AcceptBroadcast=0x08,
|
|
AcceptMulticast=0x04, AcceptMyPhys=0x02, AcceptAllPhys=0x01,
|
|
};
|
|
|
|
static int ioaddr;
|
|
static unsigned int cur_rx,cur_tx;
|
|
|
|
/* The RTL8139 can only transmit from a contiguous, aligned memory block. */
|
|
static unsigned char tx_buffer[TX_BUF_SIZE] __attribute__((aligned(4)));
|
|
static unsigned char rx_ring[RX_BUF_LEN+16] __attribute__((aligned(4)));
|
|
|
|
static int rtl8139_probe(struct eth_device *dev, bd_t *bis);
|
|
static int read_eeprom(int location, int addr_len);
|
|
static void rtl_reset(struct eth_device *dev);
|
|
static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length);
|
|
static int rtl_poll(struct eth_device *dev);
|
|
static void rtl_disable(struct eth_device *dev);
|
|
|
|
static struct pci_device_id supported[] = {
|
|
{PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139},
|
|
{PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_8139},
|
|
{}
|
|
};
|
|
|
|
int rtl8139_initialize(bd_t *bis)
|
|
{
|
|
pci_dev_t devno;
|
|
int card_number = 0;
|
|
struct eth_device *dev;
|
|
u32 iobase;
|
|
int idx=0;
|
|
|
|
while(1){
|
|
/* Find RTL8139 */
|
|
if ((devno = pci_find_devices(supported, idx++)) < 0)
|
|
break;
|
|
|
|
pci_read_config_dword(devno, PCI_BASE_ADDRESS_1, &iobase);
|
|
iobase &= ~0xf;
|
|
|
|
debug ("rtl8139: REALTEK RTL8139 @0x%x\n", iobase);
|
|
|
|
dev = (struct eth_device *)malloc(sizeof *dev);
|
|
|
|
sprintf (dev->name, "RTL8139#%d", card_number);
|
|
|
|
dev->priv = (void *) devno;
|
|
dev->iobase = (int)bus_to_phys(iobase);
|
|
dev->init = rtl8139_probe;
|
|
dev->halt = rtl_disable;
|
|
dev->send = rtl_transmit;
|
|
dev->recv = rtl_poll;
|
|
|
|
eth_register (dev);
|
|
|
|
card_number++;
|
|
|
|
pci_write_config_byte (devno, PCI_LATENCY_TIMER, 0x20);
|
|
|
|
udelay (10 * 1000);
|
|
}
|
|
|
|
return card_number;
|
|
}
|
|
|
|
static int rtl8139_probe(struct eth_device *dev, bd_t *bis)
|
|
{
|
|
int i;
|
|
int speed10, fullduplex;
|
|
int addr_len;
|
|
unsigned short *ap = (unsigned short *)dev->enetaddr;
|
|
|
|
ioaddr = dev->iobase;
|
|
|
|
/* Bring the chip out of low-power mode. */
|
|
outb(0x00, ioaddr + Config1);
|
|
|
|
addr_len = read_eeprom(0,8) == 0x8129 ? 8 : 6;
|
|
for (i = 0; i < 3; i++)
|
|
*ap++ = le16_to_cpu (read_eeprom(i + 7, addr_len));
|
|
|
|
speed10 = inb(ioaddr + MediaStatus) & MSRSpeed10;
|
|
fullduplex = inw(ioaddr + MII_BMCR) & BMCRDuplex;
|
|
|
|
rtl_reset(dev);
|
|
|
|
if (inb(ioaddr + MediaStatus) & MSRLinkFail) {
|
|
printf("Cable not connected or other link failure\n");
|
|
return(0);
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
|
|
/* Serial EEPROM section. */
|
|
|
|
/* EEPROM_Ctrl bits. */
|
|
#define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
|
|
#define EE_CS 0x08 /* EEPROM chip select. */
|
|
#define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
|
|
#define EE_WRITE_0 0x00
|
|
#define EE_WRITE_1 0x02
|
|
#define EE_DATA_READ 0x01 /* EEPROM chip data out. */
|
|
#define EE_ENB (0x80 | EE_CS)
|
|
|
|
/*
|
|
Delay between EEPROM clock transitions.
|
|
No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
|
|
*/
|
|
|
|
#define eeprom_delay() inl(ee_addr)
|
|
|
|
/* The EEPROM commands include the alway-set leading bit. */
|
|
#define EE_WRITE_CMD (5)
|
|
#define EE_READ_CMD (6)
|
|
#define EE_ERASE_CMD (7)
|
|
|
|
static int read_eeprom(int location, int addr_len)
|
|
{
|
|
int i;
|
|
unsigned int retval = 0;
|
|
long ee_addr = ioaddr + Cfg9346;
|
|
int read_cmd = location | (EE_READ_CMD << addr_len);
|
|
|
|
outb(EE_ENB & ~EE_CS, ee_addr);
|
|
outb(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
|
|
/* Shift the read command bits out. */
|
|
for (i = 4 + addr_len; i >= 0; i--) {
|
|
int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
|
|
outb(EE_ENB | dataval, ee_addr);
|
|
eeprom_delay();
|
|
outb(EE_ENB | dataval | EE_SHIFT_CLK, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
outb(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
|
|
for (i = 16; i > 0; i--) {
|
|
outb(EE_ENB | EE_SHIFT_CLK, ee_addr);
|
|
eeprom_delay();
|
|
retval = (retval << 1) | ((inb(ee_addr) & EE_DATA_READ) ? 1 : 0);
|
|
outb(EE_ENB, ee_addr);
|
|
eeprom_delay();
|
|
}
|
|
|
|
/* Terminate the EEPROM access. */
|
|
outb(~EE_CS, ee_addr);
|
|
eeprom_delay();
|
|
return retval;
|
|
}
|
|
|
|
static const unsigned int rtl8139_rx_config =
|
|
(RX_BUF_LEN_IDX << 11) |
|
|
(RX_FIFO_THRESH << 13) |
|
|
(RX_DMA_BURST << 8);
|
|
|
|
static void set_rx_mode(struct eth_device *dev) {
|
|
unsigned int mc_filter[2];
|
|
int rx_mode;
|
|
/* !IFF_PROMISC */
|
|
rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
|
|
mc_filter[1] = mc_filter[0] = 0xffffffff;
|
|
|
|
outl(rtl8139_rx_config | rx_mode, ioaddr + RxConfig);
|
|
|
|
outl(mc_filter[0], ioaddr + MAR0 + 0);
|
|
outl(mc_filter[1], ioaddr + MAR0 + 4);
|
|
}
|
|
|
|
static void rtl_reset(struct eth_device *dev)
|
|
{
|
|
int i;
|
|
|
|
outb(CmdReset, ioaddr + ChipCmd);
|
|
|
|
cur_rx = 0;
|
|
cur_tx = 0;
|
|
|
|
/* Give the chip 10ms to finish the reset. */
|
|
for (i=0; i<100; ++i){
|
|
if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
|
|
udelay (100); /* wait 100us */
|
|
}
|
|
|
|
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
outb(dev->enetaddr[i], ioaddr + MAC0 + i);
|
|
|
|
/* Must enable Tx/Rx before setting transfer thresholds! */
|
|
outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
|
|
outl((RX_FIFO_THRESH<<13) | (RX_BUF_LEN_IDX<<11) | (RX_DMA_BURST<<8),
|
|
ioaddr + RxConfig); /* accept no frames yet! */
|
|
outl((TX_DMA_BURST<<8)|0x03000000, ioaddr + TxConfig);
|
|
|
|
/* The Linux driver changes Config1 here to use a different LED pattern
|
|
* for half duplex or full/autodetect duplex (for full/autodetect, the
|
|
* outputs are TX/RX, Link10/100, FULL, while for half duplex it uses
|
|
* TX/RX, Link100, Link10). This is messy, because it doesn't match
|
|
* the inscription on the mounting bracket. It should not be changed
|
|
* from the configuration EEPROM default, because the card manufacturer
|
|
* should have set that to match the card. */
|
|
|
|
#ifdef DEBUG_RX
|
|
printf("rx ring address is %X\n",(unsigned long)rx_ring);
|
|
#endif
|
|
outl(phys_to_bus((int)rx_ring), ioaddr + RxBuf);
|
|
|
|
/* If we add multicast support, the MAR0 register would have to be
|
|
* initialized to 0xffffffffffffffff (two 32 bit accesses). Etherboot
|
|
* only needs broadcast (for ARP/RARP/BOOTP/DHCP) and unicast. */
|
|
|
|
outb(CmdRxEnb | CmdTxEnb, ioaddr + ChipCmd);
|
|
|
|
outl(rtl8139_rx_config, ioaddr + RxConfig);
|
|
|
|
/* Start the chip's Tx and Rx process. */
|
|
outl(0, ioaddr + RxMissed);
|
|
|
|
/* set_rx_mode */
|
|
set_rx_mode(dev);
|
|
|
|
/* Disable all known interrupts by setting the interrupt mask. */
|
|
outw(0, ioaddr + IntrMask);
|
|
}
|
|
|
|
static int rtl_transmit(struct eth_device *dev, volatile void *packet, int length)
|
|
{
|
|
unsigned int status, to;
|
|
unsigned long txstatus;
|
|
unsigned int len = length;
|
|
|
|
ioaddr = dev->iobase;
|
|
|
|
memcpy((char *)tx_buffer, (char *)packet, (int)length);
|
|
|
|
#ifdef DEBUG_TX
|
|
printf("sending %d bytes\n", len);
|
|
#endif
|
|
|
|
/* Note: RTL8139 doesn't auto-pad, send minimum payload (another 4
|
|
* bytes are sent automatically for the FCS, totalling to 64 bytes). */
|
|
while (len < ETH_ZLEN) {
|
|
tx_buffer[len++] = '\0';
|
|
}
|
|
|
|
outl(phys_to_bus((int)tx_buffer), ioaddr + TxAddr0 + cur_tx*4);
|
|
outl(((TX_FIFO_THRESH<<11) & 0x003f0000) | len,
|
|
ioaddr + TxStatus0 + cur_tx*4);
|
|
|
|
to = currticks() + RTL_TIMEOUT;
|
|
|
|
do {
|
|
status = inw(ioaddr + IntrStatus);
|
|
/* Only acknlowledge interrupt sources we can properly handle
|
|
* here - the RxOverflow/RxFIFOOver MUST be handled in the
|
|
* rtl_poll() function. */
|
|
outw(status & (TxOK | TxErr | PCIErr), ioaddr + IntrStatus);
|
|
if ((status & (TxOK | TxErr | PCIErr)) != 0) break;
|
|
} while (currticks() < to);
|
|
|
|
txstatus = inl(ioaddr + TxStatus0 + cur_tx*4);
|
|
|
|
if (status & TxOK) {
|
|
cur_tx = (cur_tx + 1) % NUM_TX_DESC;
|
|
#ifdef DEBUG_TX
|
|
printf("tx done (%d ticks), status %hX txstatus %X\n",
|
|
to-currticks(), status, txstatus);
|
|
#endif
|
|
return length;
|
|
} else {
|
|
#ifdef DEBUG_TX
|
|
printf("tx timeout/error (%d ticks), status %hX txstatus %X\n",
|
|
currticks()-to, status, txstatus);
|
|
#endif
|
|
rtl_reset(dev);
|
|
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int rtl_poll(struct eth_device *dev)
|
|
{
|
|
unsigned int status;
|
|
unsigned int ring_offs;
|
|
unsigned int rx_size, rx_status;
|
|
int length=0;
|
|
|
|
ioaddr = dev->iobase;
|
|
|
|
if (inb(ioaddr + ChipCmd) & RxBufEmpty) {
|
|
return 0;
|
|
}
|
|
|
|
status = inw(ioaddr + IntrStatus);
|
|
/* See below for the rest of the interrupt acknowledges. */
|
|
outw(status & ~(RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
|
|
|
|
#ifdef DEBUG_RX
|
|
printf("rtl_poll: int %hX ", status);
|
|
#endif
|
|
|
|
ring_offs = cur_rx % RX_BUF_LEN;
|
|
rx_status = *(unsigned int*)KSEG1ADDR((rx_ring + ring_offs));
|
|
rx_size = rx_status >> 16;
|
|
rx_status &= 0xffff;
|
|
|
|
if ((rx_status & (RxBadSymbol|RxRunt|RxTooLong|RxCRCErr|RxBadAlign)) ||
|
|
(rx_size < ETH_ZLEN) || (rx_size > ETH_FRAME_LEN + 4)) {
|
|
printf("rx error %hX\n", rx_status);
|
|
rtl_reset(dev); /* this clears all interrupts still pending */
|
|
return 0;
|
|
}
|
|
|
|
/* Received a good packet */
|
|
length = rx_size - 4; /* no one cares about the FCS */
|
|
if (ring_offs+4+rx_size-4 > RX_BUF_LEN) {
|
|
int semi_count = RX_BUF_LEN - ring_offs - 4;
|
|
unsigned char rxdata[RX_BUF_LEN];
|
|
|
|
memcpy(rxdata, rx_ring + ring_offs + 4, semi_count);
|
|
memcpy(&(rxdata[semi_count]), rx_ring, rx_size-4-semi_count);
|
|
|
|
NetReceive(rxdata, length);
|
|
#ifdef DEBUG_RX
|
|
printf("rx packet %d+%d bytes", semi_count,rx_size-4-semi_count);
|
|
#endif
|
|
} else {
|
|
NetReceive(rx_ring + ring_offs + 4, length);
|
|
#ifdef DEBUG_RX
|
|
printf("rx packet %d bytes", rx_size-4);
|
|
#endif
|
|
}
|
|
|
|
cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
|
|
outw(cur_rx - 16, ioaddr + RxBufPtr);
|
|
/* See RTL8139 Programming Guide V0.1 for the official handling of
|
|
* Rx overflow situations. The document itself contains basically no
|
|
* usable information, except for a few exception handling rules. */
|
|
outw(status & (RxFIFOOver | RxOverflow | RxOK), ioaddr + IntrStatus);
|
|
return length;
|
|
}
|
|
|
|
static void rtl_disable(struct eth_device *dev)
|
|
{
|
|
int i;
|
|
|
|
ioaddr = dev->iobase;
|
|
|
|
/* reset the chip */
|
|
outb(CmdReset, ioaddr + ChipCmd);
|
|
|
|
/* Give the chip 10ms to finish the reset. */
|
|
for (i=0; i<100; ++i){
|
|
if ((inb(ioaddr + ChipCmd) & CmdReset) == 0) break;
|
|
udelay (100); /* wait 100us */
|
|
}
|
|
}
|
|
#endif
|