74 lines
		
	
	
		
			1.6 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			74 lines
		
	
	
		
			1.6 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * (C) Copyright 2009
 | |
|  * Marvell Semiconductor <www.marvell.com>
 | |
|  * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/arch/soc.h>
 | |
| #include <nand.h>
 | |
| 
 | |
| /* NAND Flash Soc registers */
 | |
| struct kwnandf_registers {
 | |
| 	u32 rd_params;	/* 0x10418 */
 | |
| 	u32 wr_param;	/* 0x1041c */
 | |
| 	u8  pad[0x10470 - 0x1041c - 4];
 | |
| 	u32 ctrl;	/* 0x10470 */
 | |
| };
 | |
| 
 | |
| static struct kwnandf_registers *nf_reg =
 | |
| 	(struct kwnandf_registers *)KW_NANDF_BASE;
 | |
| 
 | |
| /*
 | |
|  * hardware specific access to control-lines/bits
 | |
|  */
 | |
| #define NAND_ACTCEBOOT_BIT		0x02
 | |
| 
 | |
| static void kw_nand_hwcontrol(struct mtd_info *mtd, int cmd,
 | |
| 			      unsigned int ctrl)
 | |
| {
 | |
| 	struct nand_chip *nc = mtd->priv;
 | |
| 	u32 offs;
 | |
| 
 | |
| 	if (cmd == NAND_CMD_NONE)
 | |
| 		return;
 | |
| 
 | |
| 	if (ctrl & NAND_CLE)
 | |
| 		offs = (1 << 0);	/* Commands with A[1:0] == 01 */
 | |
| 	else if (ctrl & NAND_ALE)
 | |
| 		offs = (1 << 1);	/* Addresses with A[1:0] == 10 */
 | |
| 	else
 | |
| 		return;
 | |
| 
 | |
| 	writeb(cmd, nc->IO_ADDR_W + offs);
 | |
| }
 | |
| 
 | |
| void kw_nand_select_chip(struct mtd_info *mtd, int chip)
 | |
| {
 | |
| 	u32 data;
 | |
| 
 | |
| 	data = readl(&nf_reg->ctrl);
 | |
| 	data |= NAND_ACTCEBOOT_BIT;
 | |
| 	writel(data, &nf_reg->ctrl);
 | |
| }
 | |
| 
 | |
| int board_nand_init(struct nand_chip *nand)
 | |
| {
 | |
| 	nand->options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING;
 | |
| #if defined(CONFIG_SYS_NAND_NO_SUBPAGE_WRITE)
 | |
| 	nand->options |= NAND_NO_SUBPAGE_WRITE;
 | |
| #endif
 | |
| #if defined(CONFIG_NAND_ECC_BCH)
 | |
| 	nand->ecc.mode = NAND_ECC_SOFT_BCH;
 | |
| #else
 | |
| 	nand->ecc.mode = NAND_ECC_SOFT;
 | |
| #endif
 | |
| 	nand->cmd_ctrl = kw_nand_hwcontrol;
 | |
| 	nand->chip_delay = 40;
 | |
| 	nand->select_chip = kw_nand_select_chip;
 | |
| 	return 0;
 | |
| }
 |