440 lines
21 KiB
Plaintext
440 lines
21 KiB
Plaintext
Table of interleaving 2-4 controllers
|
|
=====================================
|
|
+--------------+-----------------------------------------------------------+
|
|
|Configuration | Memory Controller |
|
|
| | 1 2 3 4 |
|
|
|--------------+--------------+--------------+-----------------------------+
|
|
| Two memory | Not Intlv'ed | Not Intlv'ed | |
|
|
| complexes +--------------+--------------+ |
|
|
| | 2-way Intlv'ed | |
|
|
|--------------+--------------+--------------+--------------+ |
|
|
| | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed | |
|
|
| Three memory +--------------+--------------+--------------+ |
|
|
| complexes | 2-way Intlv'ed | Not Intlv'ed | |
|
|
| +-----------------------------+--------------+ |
|
|
| | 3-way Intlv'ed | |
|
|
+--------------+--------------+--------------+--------------+--------------+
|
|
| | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed | Not Intlv'ed |
|
|
| Four memory +--------------+--------------+--------------+--------------+
|
|
| complexes | 2-way Intlv'ed | 2-way Intlv'ed |
|
|
| +-----------------------------+-----------------------------+
|
|
| | 4-way Intlv'ed |
|
|
+--------------+-----------------------------------------------------------+
|
|
|
|
|
|
Table of 2-way interleaving modes supported in cpu/8xxx/ddr/
|
|
======================================================
|
|
+-------------+---------------------------------------------------------+
|
|
| | Rank Interleaving |
|
|
| +--------+-----------+-----------+------------+-----------+
|
|
|Memory | | | | 2x2 | 4x1 |
|
|
|Controller | None | 2x1 lower | 2x1 upper | {CS0+CS1}, | {CS0+CS1+ |
|
|
|Interleaving | | {CS0+CS1} | {CS2+CS3} | {CS2+CS3} | CS2+CS3} |
|
|
+-------------+--------+-----------+-----------+------------+-----------+
|
|
|None | Yes | Yes | Yes | Yes | Yes |
|
|
+-------------+--------+-----------+-----------+------------+-----------+
|
|
|Cacheline | Yes | Yes | No | No, Only(*)| Yes |
|
|
| |CS0 Only| | | {CS0+CS1} | |
|
|
+-------------+--------+-----------+-----------+------------+-----------+
|
|
|Page | Yes | Yes | No | No, Only(*)| Yes |
|
|
| |CS0 Only| | | {CS0+CS1} | |
|
|
+-------------+--------+-----------+-----------+------------+-----------+
|
|
|Bank | Yes | Yes | No | No, Only(*)| Yes |
|
|
| |CS0 Only| | | {CS0+CS1} | |
|
|
+-------------+--------+-----------+-----------+------------+-----------+
|
|
|Superbank | No | Yes | No | No, Only(*)| Yes |
|
|
| | | | | {CS0+CS1} | |
|
|
+-------------+--------+-----------+-----------+------------+-----------+
|
|
(*) Although the hardware can be configured with memory controller
|
|
interleaving using "2x2" rank interleaving, it only interleaves {CS0+CS1}
|
|
from each controller. {CS2+CS3} on each controller are only rank
|
|
interleaved on that controller.
|
|
|
|
For memory controller interleaving, identical DIMMs are suggested. Software
|
|
doesn't check the size or organization of interleaved DIMMs.
|
|
|
|
The ways to configure the ddr interleaving mode
|
|
==============================================
|
|
1. In board header file(e.g.MPC8572DS.h), add default interleaving setting
|
|
under "CONFIG_EXTRA_ENV_SETTINGS", like:
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"hwconfig=fsl_ddr:ctlr_intlv=bank" \
|
|
......
|
|
|
|
2. Run U-Boot "setenv" command to configure the memory interleaving mode.
|
|
Either numerical or string value is accepted.
|
|
|
|
# disable memory controller interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=null"
|
|
|
|
# cacheline interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=cacheline"
|
|
|
|
# page interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=page"
|
|
|
|
# bank interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=bank"
|
|
|
|
# superbank
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=superbank"
|
|
|
|
# 1KB 3-way interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=3way_1KB"
|
|
|
|
# 4KB 3-way interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=3way_4KB"
|
|
|
|
# 8KB 3-way interleaving
|
|
setenv hwconfig "fsl_ddr:ctlr_intlv=3way_8KB"
|
|
|
|
# disable bank (chip-select) interleaving
|
|
setenv hwconfig "fsl_ddr:bank_intlv=null"
|
|
|
|
# bank(chip-select) interleaving cs0+cs1
|
|
setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1"
|
|
|
|
# bank(chip-select) interleaving cs2+cs3
|
|
setenv hwconfig "fsl_ddr:bank_intlv=cs2_cs3"
|
|
|
|
# bank(chip-select) interleaving (cs0+cs1) and (cs2+cs3) (2x2)
|
|
setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_and_cs2_cs3"
|
|
|
|
# bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
|
|
setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
|
|
|
|
# bank(chip-select) interleaving (auto)
|
|
setenv hwconfig "fsl_ddr:bank_intlv=auto"
|
|
This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings
|
|
on DIMMs.
|
|
|
|
Memory controller address hashing
|
|
==================================
|
|
If the DDR controller supports address hashing, it can be enabled by hwconfig.
|
|
|
|
Syntax is:
|
|
hwconfig=fsl_ddr:addr_hash=true
|
|
|
|
Memory controller ECC on/off
|
|
============================
|
|
If ECC is enabled in board configuratoin file, i.e. #define CONFIG_DDR_ECC,
|
|
ECC can be turned on/off by hwconfig.
|
|
|
|
Syntax is
|
|
hwconfig=fsl_ddr:ecc=off
|
|
|
|
|
|
Memory address parity on/off
|
|
============================
|
|
address parity can be turned on/off by hwconfig.
|
|
Syntax is:
|
|
hwconfig=fsl_ddr:parity=on
|
|
|
|
|
|
Memory testing options for mpc85xx
|
|
==================================
|
|
1. Memory test can be done once U-Boot prompt comes up using mtest, or
|
|
2. Memory test can be done with Power-On-Self-Test function, activated at
|
|
compile time.
|
|
|
|
In order to enable the POST memory test, CONFIG_POST needs to be
|
|
defined in board configuraiton header file. By default, POST memory test
|
|
performs a fast test. A slow test can be enabled by changing the flag at
|
|
compiling time. To test memory bigger than 2GB, 36BIT support is needed.
|
|
Memory is tested within a 2GB window. TLBs are used to map the virtual 2GB
|
|
window to physical address so that all physical memory can be tested.
|
|
|
|
Combination of hwconfig
|
|
=======================
|
|
Hwconfig can be combined with multiple parameters, for example, on a supported
|
|
platform
|
|
|
|
hwconfig=fsl_ddr:addr_hash=true,ctlr_intlv=cacheline,bank_intlv=cs0_cs1_cs2_cs3,ecc=on
|
|
|
|
|
|
Table for dynamic ODT for DDR3
|
|
==============================
|
|
For single-slot system with quad-rank DIMM and dual-slot system, dynamic ODT may
|
|
be needed, depending on the configuration. The numbers in the following tables are
|
|
in Ohms.
|
|
|
|
* denotes dynamic ODT
|
|
|
|
Two slots system
|
|
+-----------------------+----------+---------------+-----------------------------+-----------------------------+
|
|
| Configuration | |DRAM controller| Slot 1 | Slot 2 |
|
|
+-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
|
|
| | | | | | Rank 1 | Rank 2 | Rank 1 | Rank 2 |
|
|
+ Slot 1 | Slot 2 |Write/Read| Write | Read |-------+------+-------+------+-------+------+-------+------+
|
|
| | | | | | Write | Read | Write | Read | Write | Read | Write | Read |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 75 | 120 | off | off | off | off | off | 30 | 30 |
|
|
| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 75 | off | off | 30 | 30 | 120 | off | off | off |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 75 | 120 | off | off | off | 20 | 20 | | |
|
|
| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 75 | off | off | 20 | 20 | 120 *| off | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 75 | 120 *| off | | | off | off | 20 | 20 |
|
|
|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 75 | 20 | 20 | | | 120 | off | off | off |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 75 | 120 *| off | | | 30 | 30 | | |
|
|
|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 75 | 30 | 30 | | | 120 *| off | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| Dual Rank | Empty | Slot 1 | off | 75 | 40 | off | off | off | | | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| Empty | Dual Rank | Slot 2 | off | 75 | | | | | 40 | off | off | off |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
|Single Rank| Empty | Slot 1 | off | 75 | 40 | off | | | | | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| Empty |Single Rank| Slot 2 | off | 75 | | | | | 40 | off | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
|
|
Single slot system
|
|
+-------------+------------+---------------+-----------------------------+-----------------------------+
|
|
| | |DRAM controller| Rank 1 | Rank 2 | Rank 3 | Rank 4 |
|
|
|Configuration| Write/Read |-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Write | Read | Write | Read | Write | Read | Write | Read | Write | Read |
|
|
+-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | R1 | off | 75 | 120 *| off | off | off | 20 | 20 | off | off |
|
|
| |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | R2 | off | 75 | off | 20 | 120 | off | 20 | 20 | off | off |
|
|
| Quad Rank |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | R3 | off | 75 | 20 | 20 | off | off | 120 *| off | off | off |
|
|
| |------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | R4 | off | 75 | 20 | 20 | off | off | off | 20 | 120 | off |
|
|
+-------------+------------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | R1 | off | 75 | 40 | off | off | off |
|
|
| Dual Rank |------------+-------+-------+-------+------+-------+------+
|
|
| | R2 | off | 75 | 40 | off | off | off |
|
|
+-------------+------------+-------+-------+-------+------+-------+------+
|
|
| Single Rank | R1 | off | 75 | 40 | off |
|
|
+-------------+------------+-------+-------+-------+------+
|
|
|
|
Reference http://www.xrosstalkmag.com/mag_issues/xrosstalk_oct08_final.pdf
|
|
http://download.micron.com/pdf/technotes/ddr3/tn4108_ddr3_design_guide.pdf
|
|
|
|
|
|
Table for ODT for DDR2
|
|
======================
|
|
Two slots system
|
|
+-----------------------+----------+---------------+-----------------------------+-----------------------------+
|
|
| Configuration | |DRAM controller| Slot 1 | Slot 2 |
|
|
+-----------+-----------+----------+-------+-------+--------------+--------------+--------------+--------------+
|
|
| | | | | | Rank 1 | Rank 2 | Rank 1 | Rank 2 |
|
|
+ Slot 1 | Slot 2 |Write/Read| Write | Read |-------+------+-------+------+-------+------+-------+------+
|
|
| | | | | | Write | Read | Write | Read | Write | Read | Write | Read |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 150 | off | off | off | off | 75 | 75 | off | off |
|
|
| Dual Rank | Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 150 | 75 | 75 | off | off | off | off | off | off |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 150 | off | off | off | off | 75 | 75 | | |
|
|
| Dual Rank |Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 150 | 75 | 75 | off | off | off | off | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 150 | off | off | | | 75 | 75 | off | off |
|
|
|Single Rank| Dual Rank |----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 150 | 75 | 75 | | | off | off | off | off |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 1 | off | 150 | off | off | | | 75 | 75 | | |
|
|
|Single Rank|Single Rank|----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| | | Slot 2 | off | 150 | 75 | 75 | | | off | off | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| Dual Rank | Empty | Slot 1 | off | 75 | 150 | off | off | off | | | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| Empty | Dual Rank | Slot 2 | off | 75 | | | | | 150 | off | off | off |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
|Single Rank| Empty | Slot 1 | off | 75 | 150 | off | | | | | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
| Empty |Single Rank| Slot 2 | off | 75 | | | | | 150 | off | | |
|
|
+-----------+-----------+----------+-------+-------+-------+------+-------+------+-------+------+-------+------+
|
|
|
|
Single slot system
|
|
+-------------+------------+---------------+-----------------------------+
|
|
| | |DRAM controller| Rank 1 | Rank 2 |
|
|
|Configuration| Write/Read |-------+-------+-------+------+-------+------+
|
|
| | | Write | Read | Write | Read | Write | Read |
|
|
+-------------+------------+-------+-------+-------+------+-------+------+
|
|
| | R1 | off | 75 | 150 | off | off | off |
|
|
| Dual Rank |------------+-------+-------+-------+------+-------+------+
|
|
| | R2 | off | 75 | 150 | off | off | off |
|
|
+-------------+------------+-------+-------+-------+------+-------+------+
|
|
| Single Rank | R1 | off | 75 | 150 | off |
|
|
+-------------+------------+-------+-------+-------+------+
|
|
|
|
Reference http://www.samsung.com/global/business/semiconductor/products/dram/downloads/applicationnote/ddr2_odt_control_200603.pdf
|
|
|
|
|
|
Interactive DDR debugging
|
|
===========================
|
|
|
|
For DDR parameter tuning up and debugging, the interactive DDR debugger can
|
|
be activated by setting the environment variable "ddr_interactive" to any
|
|
value. (The value of ddr_interactive may have a meaning in the future, but,
|
|
for now, the presence of the variable will cause the debugger to run.) Once
|
|
activated, U-Boot will show the prompt "FSL DDR>" before enabling the DDR
|
|
controller. The available commands are printed by typing "help".
|
|
|
|
Another way to enter the interactive DDR debugger without setting the
|
|
environment variable is to send the 'd' character early during the boot
|
|
process. To save booting time, no additional delay is added, so the window
|
|
to send the key press is very short -- basically, it is the time before the
|
|
memory controller code starts to run. For example, when rebooting from
|
|
within U-Boot, the user must press 'd' IMMEDIATELY after hitting enter to
|
|
initiate a 'reset' command. In case of power on/reset, the user can hold
|
|
down the 'd' key while applying power or hitting the board's reset button.
|
|
|
|
The example flow of using interactive debugging is
|
|
type command "compute" to calculate the parameters from the default
|
|
type command "print" with arguments to show SPD, options, registers
|
|
type command "edit" with arguments to change any if desired
|
|
type command "copy" with arguments to copy controller/dimm settings
|
|
type command "go" to continue calculation and enable DDR controller
|
|
|
|
Additional commands to restart the debugging are:
|
|
type command "reset" to reset the board
|
|
type command "recompute" to reload SPD and start over
|
|
|
|
Note, check "next_step" to show the flow. For example, after edit opts, the
|
|
next_step is STEP_ASSIGN_ADDRESSES. After editing registers, the next_step is
|
|
STEP_PROGRAM_REGS. Upon issuing command "go", the debugger will program the
|
|
DDR controller with the current setting without further calculation and then
|
|
exit to resume the booting of the machine.
|
|
|
|
The detail syntax for each commands are
|
|
|
|
print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
|
|
c<n> - the controller number, eg. c0, c1
|
|
d<n> - the DIMM number, eg. d0, d1
|
|
spd - print SPD data
|
|
dimmparms - DIMM parameters, calculated from SPD
|
|
commonparms - lowest common parameters for all DIMMs
|
|
opts - options
|
|
addresses - address assignment (not implemented yet)
|
|
regs - controller registers
|
|
|
|
edit <c#> <d#> <spd|dimmparms|commonparms|opts|addresses|regs> <element> <value>
|
|
c<n> - the controller number, eg. c0, c1
|
|
d<n> - the DIMM number, eg. d0, d1
|
|
spd - print SPD data
|
|
dimmparms - DIMM parameters, calculated from SPD
|
|
commonparms - lowest common parameters for all DIMMs
|
|
opts - options
|
|
addresses - address assignment (not implemented yet)
|
|
regs - controller registers
|
|
<element> - name of the modified element
|
|
byte number if the object is SPD
|
|
<value> - decimal or heximal (prefixed with 0x) numbers
|
|
|
|
copy <src c#> <src d#> <spd|dimmparms|commonparms|opts|addresses|regs> <dst c#> <dst d#>
|
|
same as for "edit" command
|
|
DIMM numbers ignored for commonparms, opts, and regs
|
|
|
|
reset
|
|
no arguement - reset the board
|
|
|
|
recompute
|
|
no argument - reload SPD and start over
|
|
|
|
compute
|
|
no argument - recompute from current next_step
|
|
|
|
next_step
|
|
no argument - show current next_step
|
|
|
|
help
|
|
no argument - print a list of all commands
|
|
|
|
go
|
|
no argument - program memory controller(s) and continue with U-Boot
|
|
|
|
Examples of debugging flow
|
|
|
|
FSL DDR>compute
|
|
Detected UDIMM UG51U6400N8SU-ACF
|
|
FSL DDR>print
|
|
print [c<n>] [d<n>] [spd] [dimmparms] [commonparms] [opts] [addresses] [regs]
|
|
FSL DDR>print dimmparms
|
|
DIMM parameters: Controller=0 DIMM=0
|
|
DIMM organization parameters:
|
|
module part name = UG51U6400N8SU-ACF
|
|
rank_density = 2147483648 bytes (2048 megabytes)
|
|
capacity = 4294967296 bytes (4096 megabytes)
|
|
burst_lengths_bitmask = 0C
|
|
base_addresss = 0 (00000000 00000000)
|
|
n_ranks = 2
|
|
data_width = 64
|
|
primary_sdram_width = 64
|
|
ec_sdram_width = 0
|
|
registered_dimm = 0
|
|
n_row_addr = 15
|
|
n_col_addr = 10
|
|
edc_config = 0
|
|
n_banks_per_sdram_device = 8
|
|
tCKmin_X_ps = 1500
|
|
tCKmin_X_minus_1_ps = 0
|
|
tCKmin_X_minus_2_ps = 0
|
|
tCKmax_ps = 0
|
|
caslat_X = 960
|
|
tAA_ps = 13125
|
|
caslat_X_minus_1 = 0
|
|
caslat_X_minus_2 = 0
|
|
caslat_lowest_derated = 0
|
|
tRCD_ps = 13125
|
|
tRP_ps = 13125
|
|
tRAS_ps = 36000
|
|
tWR_ps = 15000
|
|
tWTR_ps = 7500
|
|
tRFC_ps = 160000
|
|
tRRD_ps = 6000
|
|
tRC_ps = 49125
|
|
refresh_rate_ps = 7800000
|
|
tIS_ps = 0
|
|
tIH_ps = 0
|
|
tDS_ps = 0
|
|
tDH_ps = 0
|
|
tRTP_ps = 7500
|
|
tDQSQ_max_ps = 0
|
|
tQHS_ps = 0
|
|
FSL DDR>edit c0 opts ECC_mode 0
|
|
FSL DDR>edit c0 regs cs0_bnds 0x000000FF
|
|
FSL DDR>go
|
|
2 GiB left unmapped
|
|
4 GiB (DDR3, 64-bit, CL=9, ECC off)
|
|
DDR Chip-Select Interleaving Mode: CS0+CS1
|
|
Testing 0x00000000 - 0x7fffffff
|
|
Testing 0x80000000 - 0xffffffff
|
|
Remap DDR 2 GiB left unmapped
|
|
|
|
POST memory PASSED
|
|
Flash: 128 MiB
|
|
L2: 128 KB enabled
|
|
Corenet Platform Cache: 1024 KB enabled
|
|
SERDES: timeout resetting bank 3
|
|
SRIO1: disabled
|
|
SRIO2: disabled
|
|
MMC: FSL_ESDHC: 0
|
|
EEPROM: Invalid ID (ff ff ff ff)
|
|
PCIe1: disabled
|
|
PCIe2: Root Complex, x1, regs @ 0xfe201000
|
|
01:00.0 - 8086:10d3 - Network controller
|
|
PCIe2: Bus 00 - 01
|
|
PCIe3: disabled
|
|
In: serial
|
|
Out: serial
|
|
Err: serial
|
|
Net: Initializing Fman
|
|
Fman1: Uploading microcode version 101.8.0
|
|
e1000: 00:1b:21:81:d2:e0
|
|
FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4, FM1@DTSEC5, e1000#0 [PRIME]
|
|
Warning: e1000#0 MAC addresses don't match:
|
|
Address in SROM is 00:1b:21:81:d2:e0
|
|
Address in environment is 00:e0:0c:00:ea:05
|
|
|
|
Hit any key to stop autoboot: 0
|
|
=>
|