297 lines
		
	
	
		
			7.5 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			297 lines
		
	
	
		
			7.5 KiB
		
	
	
	
		
			C
		
	
	
	
| /*
 | |
|  * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
 | |
|  *
 | |
|  * Driver for SPI controller on DaVinci. Based on atmel_spi.c
 | |
|  * by Atmel Corporation
 | |
|  *
 | |
|  * Copyright (C) 2007 Atmel Corporation
 | |
|  *
 | |
|  * See file CREDITS for list of people who contributed to this
 | |
|  * project.
 | |
|  *
 | |
|  * This program is free software; you can redistribute it and/or
 | |
|  * modify it under the terms of the GNU General Public License as
 | |
|  * published by the Free Software Foundation; either version 2 of
 | |
|  * the License, or (at your option) any later version.
 | |
|  *
 | |
|  * This program is distributed in the hope that it will be useful,
 | |
|  * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | |
|  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | |
|  * GNU General Public License for more details.
 | |
|  *
 | |
|  * You should have received a copy of the GNU General Public License
 | |
|  * along with this program; if not, write to the Free Software
 | |
|  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 | |
|  * MA 02111-1307 USA
 | |
|  */
 | |
| #include <common.h>
 | |
| #include <spi.h>
 | |
| #include <malloc.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/arch/hardware.h>
 | |
| #include "davinci_spi.h"
 | |
| 
 | |
| void spi_init()
 | |
| {
 | |
| 	/* do nothing */
 | |
| }
 | |
| 
 | |
| struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
 | |
| 			unsigned int max_hz, unsigned int mode)
 | |
| {
 | |
| 	struct davinci_spi_slave	*ds;
 | |
| 
 | |
| 	if (!spi_cs_is_valid(bus, cs))
 | |
| 		return NULL;
 | |
| 
 | |
| 	ds = malloc(sizeof(*ds));
 | |
| 	if (!ds)
 | |
| 		return NULL;
 | |
| 
 | |
| 	ds->slave.bus = bus;
 | |
| 	ds->slave.cs = cs;
 | |
| 	ds->regs = (struct davinci_spi_regs *)CONFIG_SYS_SPI_BASE;
 | |
| 	ds->freq = max_hz;
 | |
| 
 | |
| 	return &ds->slave;
 | |
| }
 | |
| 
 | |
| void spi_free_slave(struct spi_slave *slave)
 | |
| {
 | |
| 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 | |
| 
 | |
| 	free(ds);
 | |
| }
 | |
| 
 | |
| int spi_claim_bus(struct spi_slave *slave)
 | |
| {
 | |
| 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 | |
| 	unsigned int scalar;
 | |
| 
 | |
| 	/* Enable the SPI hardware */
 | |
| 	writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
 | |
| 	udelay(1000);
 | |
| 	writel(SPIGCR0_SPIENA_MASK, &ds->regs->gcr0);
 | |
| 
 | |
| 	/* Set master mode, powered up and not activated */
 | |
| 	writel(SPIGCR1_MASTER_MASK | SPIGCR1_CLKMOD_MASK, &ds->regs->gcr1);
 | |
| 
 | |
| 	/* CS, CLK, SIMO and SOMI are functional pins */
 | |
| 	writel((SPIPC0_EN0FUN_MASK | SPIPC0_CLKFUN_MASK |
 | |
| 		SPIPC0_DOFUN_MASK | SPIPC0_DIFUN_MASK), &ds->regs->pc0);
 | |
| 
 | |
| 	/* setup format */
 | |
| 	scalar = ((CONFIG_SYS_SPI_CLK / ds->freq) - 1) & 0xFF;
 | |
| 
 | |
| 	/*
 | |
| 	 * Use following format:
 | |
| 	 *   character length = 8,
 | |
| 	 *   clock signal delayed by half clk cycle,
 | |
| 	 *   clock low in idle state - Mode 0,
 | |
| 	 *   MSB shifted out first
 | |
| 	 */
 | |
| 	writel(8 | (scalar << SPIFMT_PRESCALE_SHIFT) |
 | |
| 		(1 << SPIFMT_PHASE_SHIFT), &ds->regs->fmt0);
 | |
| 
 | |
| 	/*
 | |
| 	 * Including a minor delay. No science here. Should be good even with
 | |
| 	 * no delay
 | |
| 	 */
 | |
| 	writel((50 << SPI_C2TDELAY_SHIFT) |
 | |
| 		(50 << SPI_T2CDELAY_SHIFT), &ds->regs->delay);
 | |
| 
 | |
| 	/* default chip select register */
 | |
| 	writel(SPIDEF_CSDEF0_MASK, &ds->regs->def);
 | |
| 
 | |
| 	/* no interrupts */
 | |
| 	writel(0, &ds->regs->int0);
 | |
| 	writel(0, &ds->regs->lvl);
 | |
| 
 | |
| 	/* enable SPI */
 | |
| 	writel((readl(&ds->regs->gcr1) | SPIGCR1_SPIENA_MASK), &ds->regs->gcr1);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void spi_release_bus(struct spi_slave *slave)
 | |
| {
 | |
| 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 | |
| 
 | |
| 	/* Disable the SPI hardware */
 | |
| 	writel(SPIGCR0_SPIRST_MASK, &ds->regs->gcr0);
 | |
| }
 | |
| 
 | |
| /*
 | |
|  * This functions needs to act like a macro to avoid pipeline reloads in the
 | |
|  * loops below. Use always_inline. This gains us about 160KiB/s and the bloat
 | |
|  * appears to be zero bytes (da830).
 | |
|  */
 | |
| __attribute__((always_inline))
 | |
| static inline u32 davinci_spi_xfer_data(struct davinci_spi_slave *ds, u32 data)
 | |
| {
 | |
| 	u32	buf_reg_val;
 | |
| 
 | |
| 	/* send out data */
 | |
| 	writel(data, &ds->regs->dat1);
 | |
| 
 | |
| 	/* wait for the data to clock in/out */
 | |
| 	while ((buf_reg_val = readl(&ds->regs->buf)) & SPIBUF_RXEMPTY_MASK)
 | |
| 		;
 | |
| 
 | |
| 	return buf_reg_val;
 | |
| }
 | |
| 
 | |
| static int davinci_spi_read(struct spi_slave *slave, unsigned int len,
 | |
| 			    u8 *rxp, unsigned long flags)
 | |
| {
 | |
| 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 | |
| 	unsigned int data1_reg_val;
 | |
| 
 | |
| 	/* enable CS hold, CS[n] and clear the data bits */
 | |
| 	data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
 | |
| 			 (slave->cs << SPIDAT1_CSNR_SHIFT));
 | |
| 
 | |
| 	/* wait till TXFULL is deasserted */
 | |
| 	while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
 | |
| 		;
 | |
| 
 | |
| 	/* preload the TX buffer to avoid clock starvation */
 | |
| 	writel(data1_reg_val, &ds->regs->dat1);
 | |
| 
 | |
| 	/* keep reading 1 byte until only 1 byte left */
 | |
| 	while ((len--) > 1)
 | |
| 		*rxp++ = davinci_spi_xfer_data(ds, data1_reg_val);
 | |
| 
 | |
| 	/* clear CS hold when we reach the end */
 | |
| 	if (flags & SPI_XFER_END)
 | |
| 		data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
 | |
| 
 | |
| 	/* read the last byte */
 | |
| 	*rxp = davinci_spi_xfer_data(ds, data1_reg_val);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int davinci_spi_write(struct spi_slave *slave, unsigned int len,
 | |
| 			     const u8 *txp, unsigned long flags)
 | |
| {
 | |
| 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 | |
| 	unsigned int data1_reg_val;
 | |
| 
 | |
| 	/* enable CS hold and clear the data bits */
 | |
| 	data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
 | |
| 			 (slave->cs << SPIDAT1_CSNR_SHIFT));
 | |
| 
 | |
| 	/* wait till TXFULL is deasserted */
 | |
| 	while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
 | |
| 		;
 | |
| 
 | |
| 	/* preload the TX buffer to avoid clock starvation */
 | |
| 	if (len > 2) {
 | |
| 		writel(data1_reg_val | *txp++, &ds->regs->dat1);
 | |
| 		len--;
 | |
| 	}
 | |
| 
 | |
| 	/* keep writing 1 byte until only 1 byte left */
 | |
| 	while ((len--) > 1)
 | |
| 		davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
 | |
| 
 | |
| 	/* clear CS hold when we reach the end */
 | |
| 	if (flags & SPI_XFER_END)
 | |
| 		data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
 | |
| 
 | |
| 	/* write the last byte */
 | |
| 	davinci_spi_xfer_data(ds, data1_reg_val | *txp);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifndef CONFIG_SPI_HALF_DUPLEX
 | |
| static int davinci_spi_read_write(struct spi_slave *slave, unsigned int len,
 | |
| 				  u8 *rxp, const u8 *txp, unsigned long flags)
 | |
| {
 | |
| 	struct davinci_spi_slave *ds = to_davinci_spi(slave);
 | |
| 	unsigned int data1_reg_val;
 | |
| 
 | |
| 	/* enable CS hold and clear the data bits */
 | |
| 	data1_reg_val = ((1 << SPIDAT1_CSHOLD_SHIFT) |
 | |
| 			 (slave->cs << SPIDAT1_CSNR_SHIFT));
 | |
| 
 | |
| 	/* wait till TXFULL is deasserted */
 | |
| 	while (readl(&ds->regs->buf) & SPIBUF_TXFULL_MASK)
 | |
| 		;
 | |
| 
 | |
| 	/* keep reading and writing 1 byte until only 1 byte left */
 | |
| 	while ((len--) > 1)
 | |
| 		*rxp++ = davinci_spi_xfer_data(ds, data1_reg_val | *txp++);
 | |
| 
 | |
| 	/* clear CS hold when we reach the end */
 | |
| 	if (flags & SPI_XFER_END)
 | |
| 		data1_reg_val &= ~(1 << SPIDAT1_CSHOLD_SHIFT);
 | |
| 
 | |
| 	/* read and write the last byte */
 | |
| 	*rxp = davinci_spi_xfer_data(ds, data1_reg_val | *txp);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
 | |
| 	     const void *dout, void *din, unsigned long flags)
 | |
| {
 | |
| 	unsigned int len;
 | |
| 
 | |
| 	if (bitlen == 0)
 | |
| 		/* Finish any previously submitted transfers */
 | |
| 		goto out;
 | |
| 
 | |
| 	/*
 | |
| 	 * It's not clear how non-8-bit-aligned transfers are supposed to be
 | |
| 	 * represented as a stream of bytes...this is a limitation of
 | |
| 	 * the current SPI interface - here we terminate on receiving such a
 | |
| 	 * transfer request.
 | |
| 	 */
 | |
| 	if (bitlen % 8) {
 | |
| 		/* Errors always terminate an ongoing transfer */
 | |
| 		flags |= SPI_XFER_END;
 | |
| 		goto out;
 | |
| 	}
 | |
| 
 | |
| 	len = bitlen / 8;
 | |
| 
 | |
| 	if (!dout)
 | |
| 		return davinci_spi_read(slave, len, din, flags);
 | |
| 	else if (!din)
 | |
| 		return davinci_spi_write(slave, len, dout, flags);
 | |
| #ifndef CONFIG_SPI_HALF_DUPLEX
 | |
| 	else
 | |
| 		return davinci_spi_read_write(slave, len, din, dout, flags);
 | |
| #else
 | |
| 	printf("SPI full duplex transaction requested with "
 | |
| 	       "CONFIG_SPI_HALF_DUPLEX defined.\n");
 | |
| 	flags |= SPI_XFER_END;
 | |
| #endif
 | |
| 
 | |
| out:
 | |
| 	if (flags & SPI_XFER_END) {
 | |
| 		u8 dummy = 0;
 | |
| 		davinci_spi_write(slave, 1, &dummy, flags);
 | |
| 	}
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| int spi_cs_is_valid(unsigned int bus, unsigned int cs)
 | |
| {
 | |
| 	return bus == 0 && cs == 0;
 | |
| }
 | |
| 
 | |
| void spi_cs_activate(struct spi_slave *slave)
 | |
| {
 | |
| 	/* do nothing */
 | |
| }
 | |
| 
 | |
| void spi_cs_deactivate(struct spi_slave *slave)
 | |
| {
 | |
| 	/* do nothing */
 | |
| }
 |