Heiko Schocher c39fcad780 arm, imx6, aristainetos2: set gpr register after reset ... setting the gpr 1,8 and 12 registers to a fix value. This is needed because after a WDT reset, this registers are not correct resettet, and prevent linux from booting again. Signed-off-by: Heiko Schocher <hs@denx.de>		2015-10-30 15:08:55 +01:00
..
Kconfig	mx6: remove SYS_SOC from board Kconfig	2015-09-13 10:37:29 +02:00
MAINTAINERS	imx6, aristaintetos2: add me as maintainer	2015-09-20 10:03:25 +02:00
Makefile	…
aristainetos-v1.c	imx: clock support enet2 anatop clock support	2015-09-02 15:29:14 +02:00
aristainetos-v2.c	arm, imx6, aristainetos2: set gpr register after reset	2015-10-30 15:08:55 +01:00
aristainetos.c	arm, imx6: add aristainetos 2b board version	2015-09-02 15:38:16 +02:00
aristainetos.cfg	…
aristainetos2.cfg	arm, imx6: add support for aristainetos2 board	2015-05-26 14:18:11 +02:00
axi.cfg	arm, imx6: add support for aristainetos2 board	2015-05-26 14:18:11 +02:00
clocks.cfg	…
clocks2.cfg	arm, imx6: add support for aristainetos2 board	2015-05-26 14:18:11 +02:00
ddr-setup.cfg	…
ddr-setup2.cfg	arm, imx6: add support for aristainetos2 board	2015-05-26 14:18:11 +02:00
mt41j128M.cfg	…
nt5cc256m16cp.cfg	arm, imx6: add support for aristainetos2 board	2015-05-26 14:18:11 +02:00