631 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			631 lines
		
	
	
		
			15 KiB
		
	
	
	
		
			C
		
	
	
	
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 | 
						|
/*
 | 
						|
 * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
 | 
						|
 */
 | 
						|
 | 
						|
#define LOG_CATEGORY LOGC_ARCH
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <clk.h>
 | 
						|
#include <cpu_func.h>
 | 
						|
#include <debug_uart.h>
 | 
						|
#include <env.h>
 | 
						|
#include <init.h>
 | 
						|
#include <log.h>
 | 
						|
#include <misc.h>
 | 
						|
#include <net.h>
 | 
						|
#include <asm/io.h>
 | 
						|
#include <asm/arch/bsec.h>
 | 
						|
#include <asm/arch/stm32.h>
 | 
						|
#include <asm/arch/sys_proto.h>
 | 
						|
#include <asm/global_data.h>
 | 
						|
#include <dm/device.h>
 | 
						|
#include <dm/uclass.h>
 | 
						|
#include <linux/bitops.h>
 | 
						|
 | 
						|
/* RCC register */
 | 
						|
#define RCC_TZCR		(STM32_RCC_BASE + 0x00)
 | 
						|
#define RCC_DBGCFGR		(STM32_RCC_BASE + 0x080C)
 | 
						|
#define RCC_BDCR		(STM32_RCC_BASE + 0x0140)
 | 
						|
#define RCC_MP_APB5ENSETR	(STM32_RCC_BASE + 0x0208)
 | 
						|
#define RCC_MP_AHB5ENSETR	(STM32_RCC_BASE + 0x0210)
 | 
						|
#define RCC_BDCR_VSWRST		BIT(31)
 | 
						|
#define RCC_BDCR_RTCSRC		GENMASK(17, 16)
 | 
						|
#define RCC_DBGCFGR_DBGCKEN	BIT(8)
 | 
						|
 | 
						|
/* Security register */
 | 
						|
#define ETZPC_TZMA1_SIZE	(STM32_ETZPC_BASE + 0x04)
 | 
						|
#define ETZPC_DECPROT0		(STM32_ETZPC_BASE + 0x10)
 | 
						|
 | 
						|
#define TZC_GATE_KEEPER		(STM32_TZC_BASE + 0x008)
 | 
						|
#define TZC_REGION_ATTRIBUTE0	(STM32_TZC_BASE + 0x110)
 | 
						|
#define TZC_REGION_ID_ACCESS0	(STM32_TZC_BASE + 0x114)
 | 
						|
 | 
						|
#define TAMP_CR1		(STM32_TAMP_BASE + 0x00)
 | 
						|
 | 
						|
#define PWR_CR1			(STM32_PWR_BASE + 0x00)
 | 
						|
#define PWR_MCUCR		(STM32_PWR_BASE + 0x14)
 | 
						|
#define PWR_CR1_DBP		BIT(8)
 | 
						|
#define PWR_MCUCR_SBF		BIT(6)
 | 
						|
 | 
						|
/* DBGMCU register */
 | 
						|
#define DBGMCU_IDC		(STM32_DBGMCU_BASE + 0x00)
 | 
						|
#define DBGMCU_APB4FZ1		(STM32_DBGMCU_BASE + 0x2C)
 | 
						|
#define DBGMCU_APB4FZ1_IWDG2	BIT(2)
 | 
						|
#define DBGMCU_IDC_DEV_ID_MASK	GENMASK(11, 0)
 | 
						|
#define DBGMCU_IDC_DEV_ID_SHIFT	0
 | 
						|
#define DBGMCU_IDC_REV_ID_MASK	GENMASK(31, 16)
 | 
						|
#define DBGMCU_IDC_REV_ID_SHIFT	16
 | 
						|
 | 
						|
/* GPIOZ registers */
 | 
						|
#define GPIOZ_SECCFGR		0x54004030
 | 
						|
 | 
						|
/* boot interface from Bootrom
 | 
						|
 * - boot instance = bit 31:16
 | 
						|
 * - boot device = bit 15:0
 | 
						|
 */
 | 
						|
#define BOOTROM_PARAM_ADDR	0x2FFC0078
 | 
						|
#define BOOTROM_MODE_MASK	GENMASK(15, 0)
 | 
						|
#define BOOTROM_MODE_SHIFT	0
 | 
						|
#define BOOTROM_INSTANCE_MASK	 GENMASK(31, 16)
 | 
						|
#define BOOTROM_INSTANCE_SHIFT	16
 | 
						|
 | 
						|
/* Device Part Number (RPN) = OTP_DATA1 lower 8 bits */
 | 
						|
#define RPN_SHIFT	0
 | 
						|
#define RPN_MASK	GENMASK(7, 0)
 | 
						|
 | 
						|
/* Package = bit 27:29 of OTP16
 | 
						|
 * - 100: LBGA448 (FFI) => AA = LFBGA 18x18mm 448 balls p. 0.8mm
 | 
						|
 * - 011: LBGA354 (LCI) => AB = LFBGA 16x16mm 359 balls p. 0.8mm
 | 
						|
 * - 010: TFBGA361 (FFC) => AC = TFBGA 12x12mm 361 balls p. 0.5mm
 | 
						|
 * - 001: TFBGA257 (LCC) => AD = TFBGA 10x10mm 257 balls p. 0.5mm
 | 
						|
 * - others: Reserved
 | 
						|
 */
 | 
						|
#define PKG_SHIFT	27
 | 
						|
#define PKG_MASK	GENMASK(2, 0)
 | 
						|
 | 
						|
/*
 | 
						|
 * early TLB into the .data section so that it not get cleared
 | 
						|
 * with 16kB allignment (see TTBR0_BASE_ADDR_MASK)
 | 
						|
 */
 | 
						|
u8 early_tlb[PGTABLE_SIZE] __section(".data") __aligned(0x4000);
 | 
						|
 | 
						|
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 | 
						|
#ifndef CONFIG_TFABOOT
 | 
						|
static void security_init(void)
 | 
						|
{
 | 
						|
	/* Disable the backup domain write protection */
 | 
						|
	/* the protection is enable at each reset by hardware */
 | 
						|
	/* And must be disable by software */
 | 
						|
	setbits_le32(PWR_CR1, PWR_CR1_DBP);
 | 
						|
 | 
						|
	while (!(readl(PWR_CR1) & PWR_CR1_DBP))
 | 
						|
		;
 | 
						|
 | 
						|
	/* If RTC clock isn't enable so this is a cold boot then we need
 | 
						|
	 * to reset the backup domain
 | 
						|
	 */
 | 
						|
	if (!(readl(RCC_BDCR) & RCC_BDCR_RTCSRC)) {
 | 
						|
		setbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
 | 
						|
		while (!(readl(RCC_BDCR) & RCC_BDCR_VSWRST))
 | 
						|
			;
 | 
						|
		clrbits_le32(RCC_BDCR, RCC_BDCR_VSWRST);
 | 
						|
	}
 | 
						|
 | 
						|
	/* allow non secure access in Write/Read for all peripheral */
 | 
						|
	writel(GENMASK(25, 0), ETZPC_DECPROT0);
 | 
						|
 | 
						|
	/* Open SYSRAM for no secure access */
 | 
						|
	writel(0x0, ETZPC_TZMA1_SIZE);
 | 
						|
 | 
						|
	/* enable TZC1 TZC2 clock */
 | 
						|
	writel(BIT(11) | BIT(12), RCC_MP_APB5ENSETR);
 | 
						|
 | 
						|
	/* Region 0 set to no access by default */
 | 
						|
	/* bit 0 / 16 => nsaid0 read/write Enable
 | 
						|
	 * bit 1 / 17 => nsaid1 read/write Enable
 | 
						|
	 * ...
 | 
						|
	 * bit 15 / 31 => nsaid15 read/write Enable
 | 
						|
	 */
 | 
						|
	writel(0xFFFFFFFF, TZC_REGION_ID_ACCESS0);
 | 
						|
	/* bit 30 / 31 => Secure Global Enable : write/read */
 | 
						|
	/* bit 0 / 1 => Region Enable for filter 0/1 */
 | 
						|
	writel(BIT(0) | BIT(1) | BIT(30) | BIT(31), TZC_REGION_ATTRIBUTE0);
 | 
						|
 | 
						|
	/* Enable Filter 0 and 1 */
 | 
						|
	setbits_le32(TZC_GATE_KEEPER, BIT(0) | BIT(1));
 | 
						|
 | 
						|
	/* RCC trust zone deactivated */
 | 
						|
	writel(0x0, RCC_TZCR);
 | 
						|
 | 
						|
	/* TAMP: deactivate the internal tamper
 | 
						|
	 * Bit 23 ITAMP8E: monotonic counter overflow
 | 
						|
	 * Bit 20 ITAMP5E: RTC calendar overflow
 | 
						|
	 * Bit 19 ITAMP4E: HSE monitoring
 | 
						|
	 * Bit 18 ITAMP3E: LSE monitoring
 | 
						|
	 * Bit 16 ITAMP1E: RTC power domain supply monitoring
 | 
						|
	 */
 | 
						|
	writel(0x0, TAMP_CR1);
 | 
						|
 | 
						|
	/* GPIOZ: deactivate the security */
 | 
						|
	writel(BIT(0), RCC_MP_AHB5ENSETR);
 | 
						|
	writel(0x0, GPIOZ_SECCFGR);
 | 
						|
}
 | 
						|
#endif /* CONFIG_TFABOOT */
 | 
						|
 | 
						|
/*
 | 
						|
 * Debug init
 | 
						|
 */
 | 
						|
static void dbgmcu_init(void)
 | 
						|
{
 | 
						|
	/*
 | 
						|
	 * Freeze IWDG2 if Cortex-A7 is in debug mode
 | 
						|
	 * done in TF-A for TRUSTED boot and
 | 
						|
	 * DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE
 | 
						|
	*/
 | 
						|
	if (!IS_ENABLED(CONFIG_TFABOOT) && bsec_dbgswenable()) {
 | 
						|
		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
 | 
						|
		setbits_le32(DBGMCU_APB4FZ1, DBGMCU_APB4FZ1_IWDG2);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
void spl_board_init(void)
 | 
						|
{
 | 
						|
	dbgmcu_init();
 | 
						|
}
 | 
						|
#endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
 | 
						|
 | 
						|
#if !defined(CONFIG_TFABOOT) && \
 | 
						|
	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 | 
						|
/* get bootmode from ROM code boot context: saved in TAMP register */
 | 
						|
static void update_bootmode(void)
 | 
						|
{
 | 
						|
	u32 boot_mode;
 | 
						|
	u32 bootrom_itf = readl(BOOTROM_PARAM_ADDR);
 | 
						|
	u32 bootrom_device, bootrom_instance;
 | 
						|
 | 
						|
	/* enable TAMP clock = RTCAPBEN */
 | 
						|
	writel(BIT(8), RCC_MP_APB5ENSETR);
 | 
						|
 | 
						|
	/* read bootrom context */
 | 
						|
	bootrom_device =
 | 
						|
		(bootrom_itf & BOOTROM_MODE_MASK) >> BOOTROM_MODE_SHIFT;
 | 
						|
	bootrom_instance =
 | 
						|
		(bootrom_itf & BOOTROM_INSTANCE_MASK) >> BOOTROM_INSTANCE_SHIFT;
 | 
						|
	boot_mode =
 | 
						|
		((bootrom_device << BOOT_TYPE_SHIFT) & BOOT_TYPE_MASK) |
 | 
						|
		((bootrom_instance << BOOT_INSTANCE_SHIFT) &
 | 
						|
		 BOOT_INSTANCE_MASK);
 | 
						|
 | 
						|
	/* save the boot mode in TAMP backup register */
 | 
						|
	clrsetbits_le32(TAMP_BOOT_CONTEXT,
 | 
						|
			TAMP_BOOT_MODE_MASK,
 | 
						|
			boot_mode << TAMP_BOOT_MODE_SHIFT);
 | 
						|
}
 | 
						|
#endif
 | 
						|
 | 
						|
u32 get_bootmode(void)
 | 
						|
{
 | 
						|
	/* read bootmode from TAMP backup register */
 | 
						|
	return (readl(TAMP_BOOT_CONTEXT) & TAMP_BOOT_MODE_MASK) >>
 | 
						|
		    TAMP_BOOT_MODE_SHIFT;
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * initialize the MMU and activate cache in SPL or in U-Boot pre-reloc stage
 | 
						|
 * MMU/TLB is updated in enable_caches() for U-Boot after relocation
 | 
						|
 * or is deactivated in U-Boot entry function start.S::cpu_init_cp15
 | 
						|
 */
 | 
						|
static void early_enable_caches(void)
 | 
						|
{
 | 
						|
	/* I-cache is already enabled in start.S: cpu_init_cp15 */
 | 
						|
 | 
						|
	if (CONFIG_IS_ENABLED(SYS_DCACHE_OFF))
 | 
						|
		return;
 | 
						|
 | 
						|
	gd->arch.tlb_size = PGTABLE_SIZE;
 | 
						|
	gd->arch.tlb_addr = (unsigned long)&early_tlb;
 | 
						|
 | 
						|
	dcache_enable();
 | 
						|
 | 
						|
	if (IS_ENABLED(CONFIG_SPL_BUILD))
 | 
						|
		mmu_set_region_dcache_behaviour(
 | 
						|
			ALIGN_DOWN(STM32_SYSRAM_BASE, MMU_SECTION_SIZE),
 | 
						|
			ALIGN(STM32_SYSRAM_SIZE, MMU_SECTION_SIZE),
 | 
						|
			DCACHE_DEFAULT_OPTION);
 | 
						|
	else
 | 
						|
		mmu_set_region_dcache_behaviour(STM32_DDR_BASE,
 | 
						|
						CONFIG_DDR_CACHEABLE_SIZE,
 | 
						|
						DCACHE_DEFAULT_OPTION);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * Early system init
 | 
						|
 */
 | 
						|
int arch_cpu_init(void)
 | 
						|
{
 | 
						|
	u32 boot_mode;
 | 
						|
 | 
						|
	early_enable_caches();
 | 
						|
 | 
						|
	/* early armv7 timer init: needed for polling */
 | 
						|
	timer_init();
 | 
						|
 | 
						|
#if !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD)
 | 
						|
#ifndef CONFIG_TFABOOT
 | 
						|
	security_init();
 | 
						|
	update_bootmode();
 | 
						|
#endif
 | 
						|
	/* Reset Coprocessor state unless it wakes up from Standby power mode */
 | 
						|
	if (!(readl(PWR_MCUCR) & PWR_MCUCR_SBF)) {
 | 
						|
		writel(TAMP_COPRO_STATE_OFF, TAMP_COPRO_STATE);
 | 
						|
		writel(0, TAMP_COPRO_RSC_TBL_ADDRESS);
 | 
						|
	}
 | 
						|
#endif
 | 
						|
 | 
						|
	boot_mode = get_bootmode();
 | 
						|
 | 
						|
	if ((boot_mode & TAMP_BOOT_DEVICE_MASK) == BOOT_SERIAL_UART)
 | 
						|
		gd->flags |= GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE;
 | 
						|
#if defined(CONFIG_DEBUG_UART) && \
 | 
						|
	!defined(CONFIG_TFABOOT) && \
 | 
						|
	(!defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD))
 | 
						|
	else
 | 
						|
		debug_uart_init();
 | 
						|
#endif
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
void enable_caches(void)
 | 
						|
{
 | 
						|
	/* I-cache is already enabled in start.S: icache_enable() not needed */
 | 
						|
 | 
						|
	/* deactivate the data cache, early enabled in arch_cpu_init() */
 | 
						|
	dcache_disable();
 | 
						|
	/*
 | 
						|
	 * update MMU after relocation and enable the data cache
 | 
						|
	 * warning: the TLB location udpated in board_f.c::reserve_mmu
 | 
						|
	 */
 | 
						|
	dcache_enable();
 | 
						|
}
 | 
						|
 | 
						|
static u32 read_idc(void)
 | 
						|
{
 | 
						|
	/* DBGMCU access is controlled by BSEC_DENABLE.DBGSWENABLE */
 | 
						|
	if (bsec_dbgswenable()) {
 | 
						|
		setbits_le32(RCC_DBGCFGR, RCC_DBGCFGR_DBGCKEN);
 | 
						|
 | 
						|
		return readl(DBGMCU_IDC);
 | 
						|
	}
 | 
						|
 | 
						|
	if (CONFIG_IS_ENABLED(STM32MP15x))
 | 
						|
		return CPU_DEV_STM32MP15; /* STM32MP15x and unknown revision */
 | 
						|
	else
 | 
						|
		return 0x0;
 | 
						|
}
 | 
						|
 | 
						|
u32 get_cpu_dev(void)
 | 
						|
{
 | 
						|
	return (read_idc() & DBGMCU_IDC_DEV_ID_MASK) >> DBGMCU_IDC_DEV_ID_SHIFT;
 | 
						|
}
 | 
						|
 | 
						|
u32 get_cpu_rev(void)
 | 
						|
{
 | 
						|
	return (read_idc() & DBGMCU_IDC_REV_ID_MASK) >> DBGMCU_IDC_REV_ID_SHIFT;
 | 
						|
}
 | 
						|
 | 
						|
static u32 get_otp(int index, int shift, int mask)
 | 
						|
{
 | 
						|
	int ret;
 | 
						|
	struct udevice *dev;
 | 
						|
	u32 otp = 0;
 | 
						|
 | 
						|
	ret = uclass_get_device_by_driver(UCLASS_MISC,
 | 
						|
					  DM_DRIVER_GET(stm32mp_bsec),
 | 
						|
					  &dev);
 | 
						|
 | 
						|
	if (!ret)
 | 
						|
		ret = misc_read(dev, STM32_BSEC_SHADOW(index),
 | 
						|
				&otp, sizeof(otp));
 | 
						|
 | 
						|
	return (otp >> shift) & mask;
 | 
						|
}
 | 
						|
 | 
						|
/* Get Device Part Number (RPN) from OTP */
 | 
						|
static u32 get_cpu_rpn(void)
 | 
						|
{
 | 
						|
	return get_otp(BSEC_OTP_RPN, RPN_SHIFT, RPN_MASK);
 | 
						|
}
 | 
						|
 | 
						|
u32 get_cpu_type(void)
 | 
						|
{
 | 
						|
	return (get_cpu_dev() << 16) | get_cpu_rpn();
 | 
						|
}
 | 
						|
 | 
						|
/* Get Package options from OTP */
 | 
						|
u32 get_cpu_package(void)
 | 
						|
{
 | 
						|
	return get_otp(BSEC_OTP_PKG, PKG_SHIFT, PKG_MASK);
 | 
						|
}
 | 
						|
 | 
						|
void get_soc_name(char name[SOC_NAME_SIZE])
 | 
						|
{
 | 
						|
	char *cpu_s, *cpu_r, *pkg;
 | 
						|
 | 
						|
	/* MPUs Part Numbers */
 | 
						|
	switch (get_cpu_type()) {
 | 
						|
	case CPU_STM32MP157Fxx:
 | 
						|
		cpu_s = "157F";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP157Dxx:
 | 
						|
		cpu_s = "157D";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP157Cxx:
 | 
						|
		cpu_s = "157C";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP157Axx:
 | 
						|
		cpu_s = "157A";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP153Fxx:
 | 
						|
		cpu_s = "153F";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP153Dxx:
 | 
						|
		cpu_s = "153D";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP153Cxx:
 | 
						|
		cpu_s = "153C";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP153Axx:
 | 
						|
		cpu_s = "153A";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP151Fxx:
 | 
						|
		cpu_s = "151F";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP151Dxx:
 | 
						|
		cpu_s = "151D";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP151Cxx:
 | 
						|
		cpu_s = "151C";
 | 
						|
		break;
 | 
						|
	case CPU_STM32MP151Axx:
 | 
						|
		cpu_s = "151A";
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		cpu_s = "????";
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	/* Package */
 | 
						|
	switch (get_cpu_package()) {
 | 
						|
	case PKG_AA_LBGA448:
 | 
						|
		pkg = "AA";
 | 
						|
		break;
 | 
						|
	case PKG_AB_LBGA354:
 | 
						|
		pkg = "AB";
 | 
						|
		break;
 | 
						|
	case PKG_AC_TFBGA361:
 | 
						|
		pkg = "AC";
 | 
						|
		break;
 | 
						|
	case PKG_AD_TFBGA257:
 | 
						|
		pkg = "AD";
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		pkg = "??";
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	/* REVISION */
 | 
						|
	switch (get_cpu_rev()) {
 | 
						|
	case CPU_REVA:
 | 
						|
		cpu_r = "A";
 | 
						|
		break;
 | 
						|
	case CPU_REVB:
 | 
						|
		cpu_r = "B";
 | 
						|
		break;
 | 
						|
	case CPU_REVZ:
 | 
						|
		cpu_r = "Z";
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		cpu_r = "?";
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	snprintf(name, SOC_NAME_SIZE, "STM32MP%s%s Rev.%s", cpu_s, pkg, cpu_r);
 | 
						|
}
 | 
						|
 | 
						|
#if defined(CONFIG_DISPLAY_CPUINFO)
 | 
						|
int print_cpuinfo(void)
 | 
						|
{
 | 
						|
	char name[SOC_NAME_SIZE];
 | 
						|
 | 
						|
	get_soc_name(name);
 | 
						|
	printf("CPU: %s\n", name);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
#endif /* CONFIG_DISPLAY_CPUINFO */
 | 
						|
 | 
						|
static void setup_boot_mode(void)
 | 
						|
{
 | 
						|
	const u32 serial_addr[] = {
 | 
						|
		STM32_USART1_BASE,
 | 
						|
		STM32_USART2_BASE,
 | 
						|
		STM32_USART3_BASE,
 | 
						|
		STM32_UART4_BASE,
 | 
						|
		STM32_UART5_BASE,
 | 
						|
		STM32_USART6_BASE,
 | 
						|
		STM32_UART7_BASE,
 | 
						|
		STM32_UART8_BASE
 | 
						|
	};
 | 
						|
	char cmd[60];
 | 
						|
	u32 boot_ctx = readl(TAMP_BOOT_CONTEXT);
 | 
						|
	u32 boot_mode =
 | 
						|
		(boot_ctx & TAMP_BOOT_MODE_MASK) >> TAMP_BOOT_MODE_SHIFT;
 | 
						|
	unsigned int instance = (boot_mode & TAMP_BOOT_INSTANCE_MASK) - 1;
 | 
						|
	u32 forced_mode = (boot_ctx & TAMP_BOOT_FORCED_MASK);
 | 
						|
	struct udevice *dev;
 | 
						|
	int alias;
 | 
						|
 | 
						|
	log_debug("%s: boot_ctx=0x%x => boot_mode=%x, instance=%d forced=%x\n",
 | 
						|
		  __func__, boot_ctx, boot_mode, instance, forced_mode);
 | 
						|
	switch (boot_mode & TAMP_BOOT_DEVICE_MASK) {
 | 
						|
	case BOOT_SERIAL_UART:
 | 
						|
		if (instance > ARRAY_SIZE(serial_addr))
 | 
						|
			break;
 | 
						|
		/* serial : search associated alias in devicetree */
 | 
						|
		sprintf(cmd, "serial@%x", serial_addr[instance]);
 | 
						|
		if (uclass_get_device_by_name(UCLASS_SERIAL, cmd, &dev))
 | 
						|
			break;
 | 
						|
		if (fdtdec_get_alias_seq(gd->fdt_blob, "serial",
 | 
						|
					 dev_of_offset(dev), &alias))
 | 
						|
			break;
 | 
						|
		sprintf(cmd, "%d", alias);
 | 
						|
		env_set("boot_device", "serial");
 | 
						|
		env_set("boot_instance", cmd);
 | 
						|
 | 
						|
		/* restore console on uart when not used */
 | 
						|
		if (gd->cur_serial_dev != dev) {
 | 
						|
			gd->flags &= ~(GD_FLG_SILENT |
 | 
						|
				       GD_FLG_DISABLE_CONSOLE);
 | 
						|
			printf("serial boot with console enabled!\n");
 | 
						|
		}
 | 
						|
		break;
 | 
						|
	case BOOT_SERIAL_USB:
 | 
						|
		env_set("boot_device", "usb");
 | 
						|
		env_set("boot_instance", "0");
 | 
						|
		break;
 | 
						|
	case BOOT_FLASH_SD:
 | 
						|
	case BOOT_FLASH_EMMC:
 | 
						|
		sprintf(cmd, "%d", instance);
 | 
						|
		env_set("boot_device", "mmc");
 | 
						|
		env_set("boot_instance", cmd);
 | 
						|
		break;
 | 
						|
	case BOOT_FLASH_NAND:
 | 
						|
		env_set("boot_device", "nand");
 | 
						|
		env_set("boot_instance", "0");
 | 
						|
		break;
 | 
						|
	case BOOT_FLASH_SPINAND:
 | 
						|
		env_set("boot_device", "spi-nand");
 | 
						|
		env_set("boot_instance", "0");
 | 
						|
		break;
 | 
						|
	case BOOT_FLASH_NOR:
 | 
						|
		env_set("boot_device", "nor");
 | 
						|
		env_set("boot_instance", "0");
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		log_debug("unexpected boot mode = %x\n", boot_mode);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (forced_mode) {
 | 
						|
	case BOOT_FASTBOOT:
 | 
						|
		printf("Enter fastboot!\n");
 | 
						|
		env_set("preboot", "env set preboot; fastboot 0");
 | 
						|
		break;
 | 
						|
	case BOOT_STM32PROG:
 | 
						|
		env_set("boot_device", "usb");
 | 
						|
		env_set("boot_instance", "0");
 | 
						|
		break;
 | 
						|
	case BOOT_UMS_MMC0:
 | 
						|
	case BOOT_UMS_MMC1:
 | 
						|
	case BOOT_UMS_MMC2:
 | 
						|
		printf("Enter UMS!\n");
 | 
						|
		instance = forced_mode - BOOT_UMS_MMC0;
 | 
						|
		sprintf(cmd, "env set preboot; ums 0 mmc %d", instance);
 | 
						|
		env_set("preboot", cmd);
 | 
						|
		break;
 | 
						|
	case BOOT_RECOVERY:
 | 
						|
		env_set("preboot", "env set preboot; run altbootcmd");
 | 
						|
		break;
 | 
						|
	case BOOT_NORMAL:
 | 
						|
		break;
 | 
						|
	default:
 | 
						|
		log_debug("unexpected forced boot mode = %x\n", forced_mode);
 | 
						|
		break;
 | 
						|
	}
 | 
						|
 | 
						|
	/* clear TAMP for next reboot */
 | 
						|
	clrsetbits_le32(TAMP_BOOT_CONTEXT, TAMP_BOOT_FORCED_MASK, BOOT_NORMAL);
 | 
						|
}
 | 
						|
 | 
						|
/*
 | 
						|
 * If there is no MAC address in the environment, then it will be initialized
 | 
						|
 * (silently) from the value in the OTP.
 | 
						|
 */
 | 
						|
__weak int setup_mac_address(void)
 | 
						|
{
 | 
						|
#if defined(CONFIG_NET)
 | 
						|
	int ret;
 | 
						|
	int i;
 | 
						|
	u32 otp[2];
 | 
						|
	uchar enetaddr[6];
 | 
						|
	struct udevice *dev;
 | 
						|
 | 
						|
	/* MAC already in environment */
 | 
						|
	if (eth_env_get_enetaddr("ethaddr", enetaddr))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	ret = uclass_get_device_by_driver(UCLASS_MISC,
 | 
						|
					  DM_DRIVER_GET(stm32mp_bsec),
 | 
						|
					  &dev);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_MAC),
 | 
						|
			otp, sizeof(otp));
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	for (i = 0; i < 6; i++)
 | 
						|
		enetaddr[i] = ((uint8_t *)&otp)[i];
 | 
						|
 | 
						|
	if (!is_valid_ethaddr(enetaddr)) {
 | 
						|
		log_err("invalid MAC address in OTP %pM\n", enetaddr);
 | 
						|
		return -EINVAL;
 | 
						|
	}
 | 
						|
	log_debug("OTP MAC address = %pM\n", enetaddr);
 | 
						|
	ret = eth_env_set_enetaddr("ethaddr", enetaddr);
 | 
						|
	if (ret)
 | 
						|
		log_err("Failed to set mac address %pM from OTP: %d\n", enetaddr, ret);
 | 
						|
#endif
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int setup_serial_number(void)
 | 
						|
{
 | 
						|
	char serial_string[25];
 | 
						|
	u32 otp[3] = {0, 0, 0 };
 | 
						|
	struct udevice *dev;
 | 
						|
	int ret;
 | 
						|
 | 
						|
	if (env_get("serial#"))
 | 
						|
		return 0;
 | 
						|
 | 
						|
	ret = uclass_get_device_by_driver(UCLASS_MISC,
 | 
						|
					  DM_DRIVER_GET(stm32mp_bsec),
 | 
						|
					  &dev);
 | 
						|
	if (ret)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	ret = misc_read(dev, STM32_BSEC_SHADOW(BSEC_OTP_SERIAL),
 | 
						|
			otp, sizeof(otp));
 | 
						|
	if (ret < 0)
 | 
						|
		return ret;
 | 
						|
 | 
						|
	sprintf(serial_string, "%08X%08X%08X", otp[0], otp[1], otp[2]);
 | 
						|
	env_set("serial#", serial_string);
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
int arch_misc_init(void)
 | 
						|
{
 | 
						|
	setup_boot_mode();
 | 
						|
	setup_mac_address();
 | 
						|
	setup_serial_number();
 | 
						|
 | 
						|
	return 0;
 | 
						|
}
 |