293 lines
7.0 KiB
C
293 lines
7.0 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mpc5xxx.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <libfdt.h>
|
|
|
|
#define SDRAM_DDR 0
|
|
#if 1
|
|
/* Settings Icecube */
|
|
#define SDRAM_MODE 0x00CD0000
|
|
#define SDRAM_CONTROL 0x504F0000
|
|
#define SDRAM_CONFIG1 0xD2322800
|
|
#define SDRAM_CONFIG2 0x8AD70000
|
|
#else
|
|
/*Settings Jupiter UB 1.0.0 */
|
|
#define SDRAM_MODE 0x008D0000
|
|
#define SDRAM_CONTROL 0xD04F0000
|
|
#define SDRAM_CONFIG1 0xf7277f00
|
|
#define SDRAM_CONFIG2 0x88b70004
|
|
#endif
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
static void sdram_start (int hi_addr)
|
|
{
|
|
long hi_addr_bit = hi_addr ? 0x01000000 : 0;
|
|
|
|
/* unlock mode register */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* precharge all banks */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
#if SDRAM_DDR
|
|
/* set mode register: extended mode */
|
|
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* set mode register: reset DLL */
|
|
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
|
|
__asm__ volatile ("sync");
|
|
#endif
|
|
|
|
/* precharge all banks */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* auto refresh */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* set mode register */
|
|
*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
|
|
__asm__ volatile ("sync");
|
|
|
|
/* normal operation */
|
|
*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
|
|
__asm__ volatile ("sync");
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* ATTENTION: Although partially referenced initdram does NOT make real use
|
|
* use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
|
|
* is something else than 0x00000000.
|
|
*/
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
ulong dramsize = 0;
|
|
ulong dramsize2 = 0;
|
|
uint svr, pvr;
|
|
|
|
#ifndef CONFIG_SYS_RAMBOOT
|
|
ulong test1, test2;
|
|
|
|
/* setup SDRAM chip selects */
|
|
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
|
|
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
|
|
__asm__ volatile ("sync");
|
|
|
|
/* setup config registers */
|
|
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
|
|
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
|
|
__asm__ volatile ("sync");
|
|
|
|
#if SDRAM_DDR
|
|
/* set tap delay */
|
|
*(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
|
|
__asm__ volatile ("sync");
|
|
#endif
|
|
|
|
/* find RAM size using SDRAM CS0 only */
|
|
sdram_start(0);
|
|
test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
|
|
sdram_start(1);
|
|
test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
|
|
if (test1 > test2) {
|
|
sdram_start(0);
|
|
dramsize = test1;
|
|
} else {
|
|
dramsize = test2;
|
|
}
|
|
|
|
/* memory smaller than 1MB is impossible */
|
|
if (dramsize < (1 << 20)) {
|
|
dramsize = 0;
|
|
}
|
|
|
|
/* set SDRAM CS0 size according to the amount of RAM found */
|
|
if (dramsize > 0) {
|
|
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
|
|
} else {
|
|
*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
|
|
}
|
|
|
|
/* let SDRAM CS1 start right after CS0 */
|
|
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
|
|
|
|
/* find RAM size using SDRAM CS1 only */
|
|
if (!dramsize)
|
|
sdram_start(0);
|
|
test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
|
|
if (!dramsize) {
|
|
sdram_start(1);
|
|
test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
|
|
}
|
|
if (test1 > test2) {
|
|
sdram_start(0);
|
|
dramsize2 = test1;
|
|
} else {
|
|
dramsize2 = test2;
|
|
}
|
|
|
|
/* memory smaller than 1MB is impossible */
|
|
if (dramsize2 < (1 << 20)) {
|
|
dramsize2 = 0;
|
|
}
|
|
|
|
/* set SDRAM CS1 size according to the amount of RAM found */
|
|
if (dramsize2 > 0) {
|
|
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
|
|
| (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
|
|
} else {
|
|
*(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
|
|
}
|
|
|
|
#else /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/* retrieve size of memory connected to SDRAM CS0 */
|
|
dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
|
|
if (dramsize >= 0x13) {
|
|
dramsize = (1 << (dramsize - 0x13)) << 20;
|
|
} else {
|
|
dramsize = 0;
|
|
}
|
|
|
|
/* retrieve size of memory connected to SDRAM CS1 */
|
|
dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
|
|
if (dramsize2 >= 0x13) {
|
|
dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
|
|
} else {
|
|
dramsize2 = 0;
|
|
}
|
|
|
|
#endif /* CONFIG_SYS_RAMBOOT */
|
|
|
|
/*
|
|
* On MPC5200B we need to set the special configuration delay in the
|
|
* DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
|
|
* Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
|
|
*
|
|
* "The SDelay should be written to a value of 0x00000004. It is
|
|
* required to account for changes caused by normal wafer processing
|
|
* parameters."
|
|
*/
|
|
svr = get_svr();
|
|
pvr = get_pvr();
|
|
if ((SVR_MJREV(svr) >= 2) &&
|
|
(PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
|
|
|
|
*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
|
|
__asm__ volatile ("sync");
|
|
}
|
|
|
|
return dramsize + dramsize2;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: Sauter (Jupiter)\n");
|
|
return 0;
|
|
}
|
|
|
|
void flash_preinit(void)
|
|
{
|
|
/*
|
|
* Now, when we are in RAM, enable flash write
|
|
* access for detection process.
|
|
* Note that CS_BOOT cannot be cleared when
|
|
* executing in flash.
|
|
*/
|
|
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
|
|
}
|
|
|
|
int board_early_init_r (void)
|
|
{
|
|
flash_preinit ();
|
|
return 0;
|
|
}
|
|
|
|
void flash_afterinit(ulong size)
|
|
{
|
|
if (size == 0x1000000) { /* adjust mapping */
|
|
*(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START =
|
|
START_REG(CONFIG_SYS_BOOTCS_START | size);
|
|
*(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP =
|
|
STOP_REG(CONFIG_SYS_BOOTCS_START | size, size);
|
|
}
|
|
*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
|
|
*(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
|
|
}
|
|
|
|
int update_flash_size (int flash_size)
|
|
{
|
|
flash_afterinit (flash_size);
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
*(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PCI
|
|
static struct pci_controller hose;
|
|
|
|
extern void pci_mpc5xxx_init(struct pci_controller *);
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
pci_mpc5xxx_init(&hose);
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
|
|
|
|
void init_ide_reset (void)
|
|
{
|
|
debug ("init_ide_reset\n");
|
|
|
|
/* Configure PSC1_4 as GPIO output for ATA reset */
|
|
*(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4;
|
|
*(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4;
|
|
/* Deassert reset */
|
|
*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
|
|
}
|
|
|
|
void ide_set_reset (int idereset)
|
|
{
|
|
debug ("ide_reset(%d)\n", idereset);
|
|
|
|
if (idereset) {
|
|
*(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4;
|
|
/* Make a delay. MPC5200 spec says 25 usec min */
|
|
udelay(500000);
|
|
} else {
|
|
*(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|