121 lines
		
	
	
		
			2.6 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			121 lines
		
	
	
		
			2.6 KiB
		
	
	
	
		
			C
		
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * Copyright 2019 NXP
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <env.h>
 | |
| #include <errno.h>
 | |
| #include <init.h>
 | |
| #include <miiphy.h>
 | |
| #include <netdev.h>
 | |
| #include <linux/delay.h>
 | |
| #include <asm/global_data.h>
 | |
| #include <asm/mach-imx/iomux-v3.h>
 | |
| #include <asm-generic/gpio.h>
 | |
| #include <asm/arch/imx8mp_pins.h>
 | |
| #include <asm/arch/clock.h>
 | |
| #include <asm/arch/sys_proto.h>
 | |
| #include <asm/mach-imx/gpio.h>
 | |
| 
 | |
| DECLARE_GLOBAL_DATA_PTR;
 | |
| 
 | |
| #define UART_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_FSEL1)
 | |
| #define WDOG_PAD_CTRL	(PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE)
 | |
| 
 | |
| static iomux_v3_cfg_t const uart_pads[] = {
 | |
| 	MX8MP_PAD_UART2_RXD__UART2_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
 | |
| 	MX8MP_PAD_UART2_TXD__UART2_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
 | |
| };
 | |
| 
 | |
| static iomux_v3_cfg_t const wdog_pads[] = {
 | |
| 	MX8MP_PAD_GPIO1_IO02__WDOG1_WDOG_B  | MUX_PAD_CTRL(WDOG_PAD_CTRL),
 | |
| };
 | |
| 
 | |
| int board_early_init_f(void)
 | |
| {
 | |
| 	struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR;
 | |
| 
 | |
| 	imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads));
 | |
| 
 | |
| 	set_wdog_reset(wdog);
 | |
| 
 | |
| 	imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void setup_fec(void)
 | |
| {
 | |
| 	struct iomuxc_gpr_base_regs *gpr =
 | |
| 		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
 | |
| 
 | |
| 	/* Enable RGMII TX clk output */
 | |
| 	setbits_le32(&gpr->gpr[1], BIT(22));
 | |
| }
 | |
| 
 | |
| #define EQOS_RST_PAD IMX_GPIO_NR(4, 22)
 | |
| static iomux_v3_cfg_t const eqos_rst_pads[] = {
 | |
| 	MX8MP_PAD_SAI2_RXC__GPIO4_IO22 | MUX_PAD_CTRL(NO_PAD_CTRL),
 | |
| };
 | |
| 
 | |
| static void setup_iomux_eqos(void)
 | |
| {
 | |
| 	imx_iomux_v3_setup_multiple_pads(eqos_rst_pads,
 | |
| 					 ARRAY_SIZE(eqos_rst_pads));
 | |
| 
 | |
| 	gpio_request(EQOS_RST_PAD, "eqos_rst");
 | |
| 	gpio_direction_output(EQOS_RST_PAD, 0);
 | |
| 	mdelay(15);
 | |
| 	gpio_direction_output(EQOS_RST_PAD, 1);
 | |
| 	mdelay(100);
 | |
| }
 | |
| 
 | |
| static int setup_eqos(void)
 | |
| {
 | |
| 	struct iomuxc_gpr_base_regs *gpr =
 | |
| 		(struct iomuxc_gpr_base_regs *)IOMUXC_GPR_BASE_ADDR;
 | |
| 
 | |
| 	setup_iomux_eqos();
 | |
| 
 | |
| 	/* set INTF as RGMII, enable RGMII TXC clock */
 | |
| 	clrsetbits_le32(&gpr->gpr[1],
 | |
| 			IOMUXC_GPR_GPR1_GPR_ENET_QOS_INTF_SEL_MASK, BIT(16));
 | |
| 	setbits_le32(&gpr->gpr[1], BIT(19) | BIT(21));
 | |
| 
 | |
| 	return set_clk_eqos(ENET_125MHZ);
 | |
| }
 | |
| 
 | |
| #if CONFIG_IS_ENABLED(NET)
 | |
| int board_phy_config(struct phy_device *phydev)
 | |
| {
 | |
| 	if (phydev->drv->config)
 | |
| 		phydev->drv->config(phydev);
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| int board_init(void)
 | |
| {
 | |
| 	int ret = 0;
 | |
| 
 | |
| 	if (CONFIG_IS_ENABLED(FEC_MXC)) {
 | |
| 		setup_fec();
 | |
| 
 | |
| 		if (CONFIG_IS_ENABLED(DWC_ETH_QOS))
 | |
| 			ret = setup_eqos();
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| int board_late_init(void)
 | |
| {
 | |
| #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 | |
| 	env_set("board_name", "EVK");
 | |
| 	env_set("board_rev", "iMX8MP");
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 |