89 lines
		
	
	
		
			1.7 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			89 lines
		
	
	
		
			1.7 KiB
		
	
	
	
		
			C
		
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  * Copyright (c) 2019 SiFive, Inc
 | |
|  *
 | |
|  * Authors:
 | |
|  *   Pragnesh Patel <pragnesh.patel@sifive.com>
 | |
|  */
 | |
| 
 | |
| #include <init.h>
 | |
| #include <spl.h>
 | |
| #include <misc.h>
 | |
| #include <log.h>
 | |
| #include <linux/delay.h>
 | |
| #include <linux/io.h>
 | |
| #include <asm/gpio.h>
 | |
| #include <asm/arch/gpio.h>
 | |
| #include <asm/arch/spl.h>
 | |
| 
 | |
| #define GEM_PHY_RESET		SIFIVE_GENERIC_GPIO_NR(0, 12)
 | |
| 
 | |
| #define MODE_SELECT_REG		0x1000
 | |
| #define MODE_SELECT_QSPI	0x6
 | |
| #define MODE_SELECT_SD		0xb
 | |
| #define MODE_SELECT_MASK	GENMASK(3, 0)
 | |
| 
 | |
| int spl_board_init_f(void)
 | |
| {
 | |
| 	int ret;
 | |
| 
 | |
| 	ret = spl_soc_init();
 | |
| 	if (ret) {
 | |
| 		debug("FU540 SPL init failed: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/*
 | |
| 	 * GEMGXL init VSC8541 PHY reset sequence;
 | |
| 	 * leave pull-down active for 2ms
 | |
| 	 */
 | |
| 	udelay(2000);
 | |
| 	ret = gpio_request(GEM_PHY_RESET, "gem_phy_reset");
 | |
| 	if (ret) {
 | |
| 		debug("gem_phy_reset gpio request failed: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	/* Set GPIO 12 (PHY NRESET) */
 | |
| 	ret = gpio_direction_output(GEM_PHY_RESET, 1);
 | |
| 	if (ret) {
 | |
| 		debug("gem_phy_reset gpio direction set failed: %d\n", ret);
 | |
| 		return ret;
 | |
| 	}
 | |
| 
 | |
| 	udelay(1);
 | |
| 
 | |
| 	/* Reset PHY again to enter unmanaged mode */
 | |
| 	gpio_set_value(GEM_PHY_RESET, 0);
 | |
| 	udelay(1);
 | |
| 	gpio_set_value(GEM_PHY_RESET, 1);
 | |
| 	mdelay(15);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| u32 spl_boot_device(void)
 | |
| {
 | |
| 	u32 mode_select = readl((void *)MODE_SELECT_REG);
 | |
| 	u32 boot_device = mode_select & MODE_SELECT_MASK;
 | |
| 
 | |
| 	switch (boot_device) {
 | |
| 	case MODE_SELECT_QSPI:
 | |
| 		return BOOT_DEVICE_SPI;
 | |
| 	case MODE_SELECT_SD:
 | |
| 		return BOOT_DEVICE_MMC1;
 | |
| 	default:
 | |
| 		debug("Unsupported boot device 0x%x but trying MMC1\n",
 | |
| 		      boot_device);
 | |
| 		return BOOT_DEVICE_MMC1;
 | |
| 	}
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_SPL_LOAD_FIT
 | |
| int board_fit_config_name_match(const char *name)
 | |
| {
 | |
| 	/* boot using first FIT config */
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 |