243 lines
7.2 KiB
C
243 lines
7.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright 2017-2018 NXP
|
|
*/
|
|
|
|
#ifndef __LS1088_COMMON_H
|
|
#define __LS1088_COMMON_H
|
|
|
|
/* SPL build */
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define SPL_NO_BOARDINFO
|
|
#define SPL_NO_QIXIS
|
|
#define SPL_NO_PCI
|
|
#define SPL_NO_ENV
|
|
#define SPL_NO_RTC
|
|
#define SPL_NO_USB
|
|
#define SPL_NO_SATA
|
|
#define SPL_NO_QSPI
|
|
#define SPL_NO_IFC
|
|
#undef CONFIG_DISPLAY_CPUINFO
|
|
#endif
|
|
|
|
#define CONFIG_REMAKE_ELF
|
|
|
|
#include <asm/arch/stream_id_lsch3.h>
|
|
#include <asm/arch/config.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#define LS1088ARDB_PB_BOARD 0x4A
|
|
/* Link Definitions */
|
|
#ifdef CONFIG_TFABOOT
|
|
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
|
|
#else
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
|
|
#endif
|
|
|
|
/* Link Definitions */
|
|
#define CONFIG_SYS_FSL_QSPI_BASE 0x20000000
|
|
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
#define CONFIG_VERY_BIG_RAM
|
|
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL
|
|
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
|
|
#define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL
|
|
#define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1
|
|
/*
|
|
* SMP Definitinos
|
|
*/
|
|
#define CPU_RELEASE_ADDR secondary_boot_addr
|
|
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048 * 1024)
|
|
|
|
/* GPIO */
|
|
#ifdef CONFIG_DM_GPIO
|
|
#ifndef CONFIG_MPC8XXX_GPIO
|
|
#define CONFIG_MPC8XXX_GPIO
|
|
#endif
|
|
#endif
|
|
|
|
/* I2C */
|
|
#if !CONFIG_IS_ENABLED(DM_I2C)
|
|
#define CONFIG_SYS_I2C_LEGACY
|
|
#endif
|
|
|
|
|
|
/* Serial Port */
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2)
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#if !defined(SPL_NO_IFC) || defined(CONFIG_TARGET_LS1088AQDS)
|
|
/* IFC */
|
|
#define CONFIG_FSL_IFC
|
|
#endif
|
|
|
|
/*
|
|
* During booting, IFC is mapped at the region of 0x30000000.
|
|
* But this region is limited to 256MB. To accommodate NOR, promjet
|
|
* and FPGA. This region is divided as below:
|
|
* 0x30000000 - 0x37ffffff : 128MB : NOR flash
|
|
* 0x38000000 - 0x3BFFFFFF : 64MB : Promjet
|
|
* 0x3C000000 - 0x40000000 : 64MB : FPGA etc
|
|
*
|
|
* To accommodate bigger NOR flash and other devices, we will map IFC
|
|
* chip selects to as below:
|
|
* 0x5_1000_0000..0x5_1fff_ffff Memory Hole
|
|
* 0x5_2000_0000..0x5_3fff_ffff IFC CSx (FPGA, NAND and others 512MB)
|
|
* 0x5_4000_0000..0x5_7fff_ffff ASIC or others 1GB
|
|
* 0x5_8000_0000..0x5_bfff_ffff IFC CS0 1GB (NOR/Promjet)
|
|
* 0x5_C000_0000..0x5_ffff_ffff IFC CS1 1GB (NOR/Promjet)
|
|
*
|
|
* For e.g. NOR flash at CS0 will be mapped to 0x580000000 after relocation.
|
|
* CONFIG_SYS_FLASH_BASE has the final address (core view)
|
|
* CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
|
|
* CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
|
|
* CONFIG_SYS_TEXT_BASE is linked to 0x30000000 for booting
|
|
*/
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0x580000000ULL
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS 0x80000000
|
|
#define CONFIG_SYS_FLASH_BASE_PHYS_EARLY 0x00000000
|
|
|
|
#define CONFIG_SYS_FLASH1_BASE_PHYS 0xC0000000
|
|
#define CONFIG_SYS_FLASH1_BASE_PHYS_EARLY 0x8000000
|
|
|
|
#ifndef __ASSEMBLY__
|
|
unsigned long long get_qixis_addr(void);
|
|
#endif
|
|
|
|
#define QIXIS_BASE get_qixis_addr()
|
|
#define QIXIS_BASE_PHYS 0x20000000
|
|
#define QIXIS_BASE_PHYS_EARLY 0xC000000
|
|
|
|
|
|
#define CONFIG_SYS_NAND_BASE 0x530000000ULL
|
|
#define CONFIG_SYS_NAND_BASE_PHYS 0x30000000
|
|
|
|
|
|
/* MC firmware */
|
|
/* TODO Actual DPL max length needs to be confirmed with the MC FW team */
|
|
#define CONFIG_SYS_LS_MC_DPC_MAX_LENGTH 0x20000
|
|
#define CONFIG_SYS_LS_MC_DRAM_DPC_OFFSET 0x00F00000
|
|
#define CONFIG_SYS_LS_MC_DPL_MAX_LENGTH 0x20000
|
|
#define CONFIG_SYS_LS_MC_DRAM_DPL_OFFSET 0x00F20000
|
|
#define CONFIG_SYS_LS_MC_AIOP_IMG_MAX_LENGTH 0x200000
|
|
#define CONFIG_SYS_LS_MC_DRAM_AIOP_IMG_OFFSET 0x07000000
|
|
|
|
/* Define phy_reset function to boot the MC based on mcinitcmd.
|
|
* This happens late enough to properly fixup u-boot env MAC addresses.
|
|
*/
|
|
#define CONFIG_RESET_PHY_R
|
|
|
|
/*
|
|
* Carve out a DDR region which will not be used by u-boot/Linux
|
|
*
|
|
* It will be used by MC and Debug Server. The MC region must be
|
|
* 512MB aligned, so the min size to hide is 512MB.
|
|
*/
|
|
|
|
#if defined(CONFIG_FSL_MC_ENET)
|
|
#define CONFIG_SYS_LS_MC_DRAM_BLOCK_MIN_SIZE (128UL * 1024 * 1024)
|
|
#endif
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
|
|
|
|
/* SATA */
|
|
#ifdef CONFIG_SCSI
|
|
#define CONFIG_SCSI_AHCI_PLAT
|
|
#define CONFIG_SYS_SATA1 AHCI_BASE_ADDR1
|
|
|
|
#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
|
|
#define CONFIG_SYS_SCSI_MAX_LUN 1
|
|
#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
|
|
CONFIG_SYS_SCSI_MAX_LUN)
|
|
#endif
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
|
|
|
|
#define CONFIG_HWCONFIG
|
|
#define HWCONFIG_BUFFER_SIZE 128
|
|
|
|
/* #define CONFIG_DISPLAY_CPUINFO */
|
|
|
|
#ifndef SPL_NO_ENV
|
|
/* Initial environment variables */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"hwconfig=fsl_ddr:bank_intlv=auto\0" \
|
|
"loadaddr=0x80100000\0" \
|
|
"kernel_addr=0x100000\0" \
|
|
"ramdisk_addr=0x800000\0" \
|
|
"ramdisk_size=0x2000000\0" \
|
|
"fdt_high=0xa0000000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"kernel_start=0x581000000\0" \
|
|
"kernel_load=0xa0000000\0" \
|
|
"kernel_size=0x2800000\0" \
|
|
"console=ttyAMA0,38400n8\0" \
|
|
"mcinitcmd=fsl_mc start mc 0x580a00000" \
|
|
" 0x580e00000 \0"
|
|
|
|
#ifndef CONFIG_TFABOOT
|
|
#if defined(CONFIG_QSPI_BOOT)
|
|
#define CONFIG_BOOTCOMMAND "sf probe 0:0;" \
|
|
"sf read 0x80001000 0xd00000 0x100000;"\
|
|
" fsl_mc lazyapply dpl 0x80001000 &&" \
|
|
" sf read $kernel_load $kernel_start" \
|
|
" $kernel_size && bootm $kernel_load"
|
|
#elif defined(CONFIG_SD_BOOT)
|
|
#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80001000 0x6800 0x800;"\
|
|
" fsl_mc lazyapply dpl 0x80001000 &&" \
|
|
" mmc read $kernel_load $kernel_start" \
|
|
" $kernel_size && bootm $kernel_load"
|
|
#else /* NOR BOOT*/
|
|
#define CONFIG_BOOTCOMMAND "fsl_mc lazyapply dpl 0x580d00000 &&" \
|
|
" cp.b $kernel_start $kernel_load" \
|
|
" $kernel_size && bootm $kernel_load"
|
|
#endif
|
|
#endif /* CONFIG_TFABOOT */
|
|
#endif
|
|
|
|
/* Monitor Command Prompt */
|
|
#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT) + 16)
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot args buffer */
|
|
#define CONFIG_SYS_MAXARGS 64 /* max command args */
|
|
|
|
#ifdef CONFIG_SPL
|
|
#define CONFIG_SPL_BSS_START_ADDR 0x80100000
|
|
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
|
|
#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds"
|
|
#define CONFIG_SPL_MAX_SIZE 0x16000
|
|
#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0)
|
|
#define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
|
|
|
|
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000
|
|
#define CONFIG_SYS_SPL_MALLOC_START 0x80200000
|
|
|
|
#ifdef CONFIG_NXP_ESBC
|
|
#define CONFIG_U_BOOT_HDR_SIZE (16 << 10)
|
|
/*
|
|
* HDR would be appended at end of image and copied to DDR along
|
|
* with U-Boot image. Here u-boot max. size is 512K. So if binary
|
|
* size increases then increase this size in case of secure boot as
|
|
* it uses raw u-boot image instead of fit image.
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_LEN (0x100000 + CONFIG_U_BOOT_HDR_SIZE)
|
|
#else
|
|
#define CONFIG_SYS_MONITOR_LEN 0x100000
|
|
#endif /* ifdef CONFIG_NXP_ESBC */
|
|
|
|
#endif
|
|
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
|
|
|
|
#endif /* __LS1088_COMMON_H */
|