785 lines
		
	
	
		
			22 KiB
		
	
	
	
		
			C
		
	
	
	
			
		
		
	
	
			785 lines
		
	
	
		
			22 KiB
		
	
	
	
		
			C
		
	
	
	
/*
 | 
						|
 * (C) Copyright 2006
 | 
						|
 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 | 
						|
 *
 | 
						|
 * See file CREDITS for list of people who contributed to this
 | 
						|
 * project.
 | 
						|
 *
 | 
						|
 * This program is free software; you can redistribute it and/or
 | 
						|
 * modify it under the terms of the GNU General Public License as
 | 
						|
 * published by the Free Software Foundation; either version 2 of
 | 
						|
 * the License, or (at your option) any later version.
 | 
						|
 *
 | 
						|
 * This program is distributed in the hope that it will be useful,
 | 
						|
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 | 
						|
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 | 
						|
 * GNU General Public License for more details.
 | 
						|
 *
 | 
						|
 * You should have received a copy of the GNU General Public License
 | 
						|
 * along with this program; if not, write to the Free Software
 | 
						|
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 | 
						|
 * MA 02111-1307 USA
 | 
						|
 */
 | 
						|
 | 
						|
#include <common.h>
 | 
						|
#include <mpc5xxx.h>
 | 
						|
#include <asm/processor.h>
 | 
						|
 | 
						|
#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
 | 
						|
 | 
						|
#if 0
 | 
						|
#define DEBUGF(x...) printf(x)
 | 
						|
#else
 | 
						|
#define DEBUGF(x...)
 | 
						|
#endif
 | 
						|
 | 
						|
#define swap16(x) __swab16(x)
 | 
						|
 | 
						|
flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips */
 | 
						|
 | 
						|
/*
 | 
						|
 * CAM5200 is a TQM5200B based board. Additionally it also features
 | 
						|
 * a NIOS cpu. The NIOS CPU peripherals are accessible through MPC5xxx
 | 
						|
 * Local Bus on CS5. This includes 32 bit wide RAM and SRAM as well as
 | 
						|
 * 16 bit wide flash device. Big Endian order on a 32 bit CS5 makes
 | 
						|
 * access to flash chip slightly more complicated as additional byte
 | 
						|
 * swapping is necessary within each 16 bit wide flash 'word'.
 | 
						|
 *
 | 
						|
 * This driver's task is to handle both flash devices: 32 bit TQM5200B
 | 
						|
 * flash chip and 16 bit NIOS cpu flash chip. In the below
 | 
						|
 * flash_addr_table table we use least significant address bit to mark
 | 
						|
 * 16 bit flash bank and two sets of routines *_32 and *_16 to handle
 | 
						|
 * specifics of both flashes.
 | 
						|
 */
 | 
						|
static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = {
 | 
						|
	{CONFIG_SYS_BOOTCS_START, CONFIG_SYS_CS5_START | 1}
 | 
						|
};
 | 
						|
 | 
						|
/*-----------------------------------------------------------------------
 | 
						|
 * Functions
 | 
						|
 */
 | 
						|
static int write_word(flash_info_t * info, ulong dest, ulong data);
 | 
						|
#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 | 
						|
static int write_word_32(flash_info_t * info, ulong dest, ulong data);
 | 
						|
static int write_word_16(flash_info_t * info, ulong dest, ulong data);
 | 
						|
static int flash_erase_32(flash_info_t * info, int s_first, int s_last);
 | 
						|
static int flash_erase_16(flash_info_t * info, int s_first, int s_last);
 | 
						|
static ulong flash_get_size_32(vu_long * addr, flash_info_t * info);
 | 
						|
static ulong flash_get_size_16(vu_long * addr, flash_info_t * info);
 | 
						|
#endif
 | 
						|
 | 
						|
void flash_print_info(flash_info_t * info)
 | 
						|
{
 | 
						|
	int i, k;
 | 
						|
	int size, erased;
 | 
						|
	volatile unsigned long *flash;
 | 
						|
 | 
						|
	if (info->flash_id == FLASH_UNKNOWN) {
 | 
						|
		printf("missing or unknown FLASH type\n");
 | 
						|
		return;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (info->flash_id & FLASH_VENDMASK) {
 | 
						|
		case FLASH_MAN_AMD:
 | 
						|
			printf("AMD ");
 | 
						|
			break;
 | 
						|
		case FLASH_MAN_FUJ:
 | 
						|
			printf("FUJITSU ");
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			printf("Unknown Vendor ");
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	switch (info->flash_id & FLASH_TYPEMASK) {
 | 
						|
		case FLASH_S29GL128N:
 | 
						|
			printf ("S29GL128N (256 Mbit, uniform sector size)\n");
 | 
						|
			break;
 | 
						|
		case FLASH_AM320B:
 | 
						|
			printf ("29LV320B (32 Mbit, bottom boot sect)\n");
 | 
						|
			break;
 | 
						|
		case FLASH_AM320T:
 | 
						|
			printf ("29LV320T (32 Mbit, top boot sect)\n");
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			printf("Unknown Chip Type\n");
 | 
						|
			break;
 | 
						|
	}
 | 
						|
 | 
						|
	printf("  Size: %ld KB in %d Sectors\n",
 | 
						|
			info->size >> 10, info->sector_count);
 | 
						|
 | 
						|
	printf("  Sector Start Addresses:");
 | 
						|
	for (i = 0; i < info->sector_count; ++i) {
 | 
						|
		/*
 | 
						|
		 * Check if whole sector is erased
 | 
						|
		 */
 | 
						|
		if (i != (info->sector_count - 1))
 | 
						|
			size = info->start[i + 1] - info->start[i];
 | 
						|
		else
 | 
						|
			size = info->start[0] + info->size - info->start[i];
 | 
						|
 | 
						|
		erased = 1;
 | 
						|
		flash = (volatile unsigned long *)info->start[i];
 | 
						|
		size = size >> 2;	/* divide by 4 for longword access */
 | 
						|
 | 
						|
		for (k = 0; k < size; k++) {
 | 
						|
			if (*flash++ != 0xffffffff) {
 | 
						|
				erased = 0;
 | 
						|
				break;
 | 
						|
			}
 | 
						|
		}
 | 
						|
 | 
						|
		if ((i % 5) == 0)
 | 
						|
			printf("\n   ");
 | 
						|
 | 
						|
		printf(" %08lX%s%s", info->start[i],
 | 
						|
				erased ? " E" : "  ",
 | 
						|
				info->protect[i] ? "RO " : "   ");
 | 
						|
	}
 | 
						|
	printf("\n");
 | 
						|
	return;
 | 
						|
}
 | 
						|
 | 
						|
 | 
						|
/*
 | 
						|
 * The following code cannot be run from FLASH!
 | 
						|
 */
 | 
						|
#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 | 
						|
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 | 
						|
{
 | 
						|
 | 
						|
	DEBUGF("get_size: FLASH ADDR %08lx\n", addr);
 | 
						|
 | 
						|
	/* bit 0 used for big flash marking */
 | 
						|
	if ((ulong)addr & 0x1)
 | 
						|
		return flash_get_size_16((vu_long *)((ulong)addr & 0xfffffffe), info);
 | 
						|
	else
 | 
						|
		return flash_get_size_32(addr, info);
 | 
						|
}
 | 
						|
 | 
						|
static ulong flash_get_size_32(vu_long * addr, flash_info_t * info)
 | 
						|
#else
 | 
						|
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 | 
						|
#endif
 | 
						|
{
 | 
						|
	short i;
 | 
						|
	CONFIG_SYS_FLASH_WORD_SIZE value;
 | 
						|
	ulong base = (ulong) addr;
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 | 
						|
 | 
						|
	DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr);
 | 
						|
 | 
						|
	/* Write auto select command: read Manufacturer ID */
 | 
						|
	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
 | 
						|
	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 | 
						|
	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090;
 | 
						|
	udelay(1000);
 | 
						|
 | 
						|
	value = addr2[0];
 | 
						|
	DEBUGF("FLASH MANUFACT: %x\n", value);
 | 
						|
 | 
						|
	switch (value) {
 | 
						|
		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 | 
						|
			info->flash_id = FLASH_MAN_AMD;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			info->flash_id = FLASH_UNKNOWN;
 | 
						|
			info->sector_count = 0;
 | 
						|
			info->size = 0;
 | 
						|
			return (0);	/* no or unknown flash  */
 | 
						|
	}
 | 
						|
 | 
						|
	value = addr2[1];	/* device ID            */
 | 
						|
	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 | 
						|
 | 
						|
	switch (value) {
 | 
						|
		case AMD_ID_MIRROR:
 | 
						|
			DEBUGF("Mirror Bit flash: addr[14] = %08lX  addr[15] = %08lX\n",
 | 
						|
					addr[14], addr[15]);
 | 
						|
			switch(addr[14]) {
 | 
						|
				case AMD_ID_GL128N_2:
 | 
						|
					if (addr[15] != AMD_ID_GL128N_3) {
 | 
						|
						DEBUGF("Chip: S29GL128N -> unknown\n");
 | 
						|
						info->flash_id = FLASH_UNKNOWN;
 | 
						|
					} else {
 | 
						|
						DEBUGF("Chip: S29GL128N\n");
 | 
						|
						info->flash_id += FLASH_S29GL128N;
 | 
						|
						info->sector_count = 128;
 | 
						|
						info->size = 0x02000000;
 | 
						|
					}
 | 
						|
					break;
 | 
						|
				default:
 | 
						|
					info->flash_id = FLASH_UNKNOWN;
 | 
						|
					return(0);
 | 
						|
			}
 | 
						|
			break;
 | 
						|
 | 
						|
		default:
 | 
						|
			info->flash_id = FLASH_UNKNOWN;
 | 
						|
			return (0);	/* => no or unknown flash */
 | 
						|
	}
 | 
						|
 | 
						|
	/* set up sector start address table */
 | 
						|
	for (i = 0; i < info->sector_count; i++)
 | 
						|
		info->start[i] = base + (i * 0x00040000);
 | 
						|
 | 
						|
	/* check for protected sectors */
 | 
						|
	for (i = 0; i < info->sector_count; i++) {
 | 
						|
		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 | 
						|
		/* D0 = 1 if protected */
 | 
						|
		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 | 
						|
 | 
						|
		info->protect[i] = addr2[2] & 1;
 | 
						|
	}
 | 
						|
 | 
						|
	/* issue bank reset to return to read mode */
 | 
						|
	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;
 | 
						|
 | 
						|
	return (info->size);
 | 
						|
}
 | 
						|
 | 
						|
static int wait_for_DQ7_32(flash_info_t * info, int sect)
 | 
						|
{
 | 
						|
	ulong start, now, last;
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
 | 
						|
		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 | 
						|
 | 
						|
	start = get_timer(0);
 | 
						|
	last = start;
 | 
						|
	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
 | 
						|
			(CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) {
 | 
						|
		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 | 
						|
			printf("Timeout\n");
 | 
						|
			return -1;
 | 
						|
		}
 | 
						|
		/* show that we're waiting */
 | 
						|
		if ((now - last) > 1000) {	/* every second */
 | 
						|
			putc('.');
 | 
						|
			last = now;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 | 
						|
int flash_erase(flash_info_t * info, int s_first, int s_last)
 | 
						|
{
 | 
						|
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) {
 | 
						|
		return flash_erase_16(info, s_first, s_last);
 | 
						|
	} else {
 | 
						|
		return flash_erase_32(info, s_first, s_last);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int flash_erase_32(flash_info_t * info, int s_first, int s_last)
 | 
						|
#else
 | 
						|
int flash_erase(flash_info_t * info, int s_first, int s_last)
 | 
						|
#endif
 | 
						|
{
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 | 
						|
	int flag, prot, sect;
 | 
						|
 | 
						|
	if ((s_first < 0) || (s_first > s_last)) {
 | 
						|
		if (info->flash_id == FLASH_UNKNOWN)
 | 
						|
			printf("- missing\n");
 | 
						|
		else
 | 
						|
			printf("- no sectors to erase\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->flash_id == FLASH_UNKNOWN) {
 | 
						|
		printf("Can't erase unknown flash type - aborted\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	prot = 0;
 | 
						|
	for (sect = s_first; sect <= s_last; ++sect) {
 | 
						|
		if (info->protect[sect])
 | 
						|
			prot++;
 | 
						|
	}
 | 
						|
 | 
						|
	if (prot)
 | 
						|
		printf("- Warning: %d protected sectors will not be erased!", prot);
 | 
						|
 | 
						|
	printf("\n");
 | 
						|
 | 
						|
	/* Disable interrupts which might cause a timeout here */
 | 
						|
	flag = disable_interrupts();
 | 
						|
 | 
						|
	/* Start erase on unprotected sectors */
 | 
						|
	for (sect = s_first; sect <= s_last; sect++) {
 | 
						|
		if (info->protect[sect] == 0) {	/* not protected */
 | 
						|
			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 | 
						|
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 | 
						|
			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 | 
						|
 | 
						|
			/*
 | 
						|
			 * Wait for each sector to complete, it's more
 | 
						|
			 * reliable.  According to AMD Spec, you must
 | 
						|
			 * issue all erase commands within a specified
 | 
						|
			 * timeout.  This has been seen to fail, especially
 | 
						|
			 * if printf()s are included (for debug)!!
 | 
						|
			 */
 | 
						|
			wait_for_DQ7_32(info, sect);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* re-enable interrupts if necessary */
 | 
						|
	if (flag)
 | 
						|
		enable_interrupts();
 | 
						|
 | 
						|
	/* wait at least 80us - let's wait 1 ms */
 | 
						|
	udelay(1000);
 | 
						|
 | 
						|
	/* reset to read mode */
 | 
						|
	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
 | 
						|
	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 | 
						|
 | 
						|
	printf(" done\n");
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
/*-----------------------------------------------------------------------
 | 
						|
 * Copy memory to flash, returns:
 | 
						|
 * 0 - OK
 | 
						|
 * 1 - write timeout
 | 
						|
 * 2 - Flash not erased
 | 
						|
 */
 | 
						|
int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 | 
						|
{
 | 
						|
	ulong cp, wp, data;
 | 
						|
	int i, l, rc;
 | 
						|
 | 
						|
	wp = (addr & ~3);	/* get lower word aligned address */
 | 
						|
 | 
						|
	/*
 | 
						|
	 * handle unaligned start bytes
 | 
						|
	 */
 | 
						|
	if ((l = addr - wp) != 0) {
 | 
						|
		data = 0;
 | 
						|
		for (i = 0, cp = wp; i < l; ++i, ++cp)
 | 
						|
			data = (data << 8) | (*(uchar *) cp);
 | 
						|
 | 
						|
		for (; i < 4 && cnt > 0; ++i) {
 | 
						|
			data = (data << 8) | *src++;
 | 
						|
			--cnt;
 | 
						|
			++cp;
 | 
						|
		}
 | 
						|
 | 
						|
		for (; cnt == 0 && i < 4; ++i, ++cp)
 | 
						|
			data = (data << 8) | (*(uchar *) cp);
 | 
						|
 | 
						|
		if ((rc = write_word(info, wp, data)) != 0)
 | 
						|
			return (rc);
 | 
						|
 | 
						|
		wp += 4;
 | 
						|
	}
 | 
						|
 | 
						|
	/*
 | 
						|
	 * handle word aligned part
 | 
						|
	 */
 | 
						|
	while (cnt >= 4) {
 | 
						|
		data = 0;
 | 
						|
		for (i = 0; i < 4; ++i)
 | 
						|
			data = (data << 8) | *src++;
 | 
						|
 | 
						|
		if ((rc = write_word(info, wp, data)) != 0)
 | 
						|
			return (rc);
 | 
						|
 | 
						|
		wp += 4;
 | 
						|
		cnt -= 4;
 | 
						|
	}
 | 
						|
 | 
						|
	if (cnt == 0)
 | 
						|
		return (0);
 | 
						|
 | 
						|
	/*
 | 
						|
	 * handle unaligned tail bytes
 | 
						|
	 */
 | 
						|
	data = 0;
 | 
						|
	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
 | 
						|
		data = (data << 8) | *src++;
 | 
						|
		--cnt;
 | 
						|
	}
 | 
						|
	for (; i < 4; ++i, ++cp)
 | 
						|
		data = (data << 8) | (*(uchar *) cp);
 | 
						|
 | 
						|
	return (write_word(info, wp, data));
 | 
						|
}
 | 
						|
 | 
						|
/*-----------------------------------------------------------------------
 | 
						|
 * Copy memory to flash, returns:
 | 
						|
 * 0 - OK
 | 
						|
 * 1 - write timeout
 | 
						|
 * 2 - Flash not erased
 | 
						|
 */
 | 
						|
#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 | 
						|
static int write_word(flash_info_t * info, ulong dest, ulong data)
 | 
						|
{
 | 
						|
	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) {
 | 
						|
		return write_word_16(info, dest, data);
 | 
						|
	} else {
 | 
						|
		return write_word_32(info, dest, data);
 | 
						|
	}
 | 
						|
}
 | 
						|
 | 
						|
static int write_word_32(flash_info_t * info, ulong dest, ulong data)
 | 
						|
#else
 | 
						|
static int write_word(flash_info_t * info, ulong dest, ulong data)
 | 
						|
#endif
 | 
						|
{
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
 | 
						|
	ulong *datap = &data;
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 =
 | 
						|
			(volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap;
 | 
						|
	ulong start;
 | 
						|
	int i, flag;
 | 
						|
 | 
						|
	/* Check if Flash is (sufficiently) erased */
 | 
						|
	if ((*((vu_long *)dest) & data) != data)
 | 
						|
		return (2);
 | 
						|
 | 
						|
	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 | 
						|
		/* Disable interrupts which might cause a timeout here */
 | 
						|
		flag = disable_interrupts();
 | 
						|
 | 
						|
		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA;
 | 
						|
		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055;
 | 
						|
		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0;
 | 
						|
 | 
						|
		dest2[i] = data2[i];
 | 
						|
 | 
						|
		/* re-enable interrupts if necessary */
 | 
						|
		if (flag)
 | 
						|
			enable_interrupts();
 | 
						|
 | 
						|
		/* data polling for D7 */
 | 
						|
		start = get_timer(0);
 | 
						|
		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) !=
 | 
						|
				(data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) {
 | 
						|
 | 
						|
			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
 | 
						|
				return (1);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return (0);
 | 
						|
}
 | 
						|
 | 
						|
#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV
 | 
						|
 | 
						|
#undef  CONFIG_SYS_FLASH_WORD_SIZE
 | 
						|
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short
 | 
						|
 | 
						|
/*
 | 
						|
 * The following code cannot be run from FLASH!
 | 
						|
 */
 | 
						|
static ulong flash_get_size_16(vu_long * addr, flash_info_t * info)
 | 
						|
{
 | 
						|
	short i;
 | 
						|
	CONFIG_SYS_FLASH_WORD_SIZE value;
 | 
						|
	ulong base = (ulong) addr;
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr;
 | 
						|
 | 
						|
	DEBUGF("get_size16: FLASH ADDR: %08x\n", (unsigned)addr);
 | 
						|
 | 
						|
	/* issue bank reset to return to read mode */
 | 
						|
	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000;
 | 
						|
 | 
						|
	/* Write auto select command: read Manufacturer ID */
 | 
						|
	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
 | 
						|
	addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
 | 
						|
	addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90009000;
 | 
						|
	udelay(1000);
 | 
						|
 | 
						|
	value = swap16(addr2[0]);
 | 
						|
	DEBUGF("FLASH MANUFACT: %x\n", value);
 | 
						|
 | 
						|
	switch (value) {
 | 
						|
		case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT:
 | 
						|
			info->flash_id = FLASH_MAN_AMD;
 | 
						|
			break;
 | 
						|
		case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT:
 | 
						|
			info->flash_id = FLASH_MAN_FUJ;
 | 
						|
			break;
 | 
						|
		default:
 | 
						|
			info->flash_id = FLASH_UNKNOWN;
 | 
						|
			info->sector_count = 0;
 | 
						|
			info->size = 0;
 | 
						|
			return (0);	/* no or unknown flash  */
 | 
						|
	}
 | 
						|
 | 
						|
	value = swap16(addr2[1]);	/* device ID            */
 | 
						|
	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 | 
						|
 | 
						|
	switch (value) {
 | 
						|
		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B:
 | 
						|
			info->flash_id += FLASH_AM320B;
 | 
						|
			info->sector_count = 71;
 | 
						|
			info->size = 0x00400000;
 | 
						|
			break;	/* => 4 MB	*/
 | 
						|
		case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T:
 | 
						|
			info->flash_id += FLASH_AM320T;
 | 
						|
			info->sector_count = 71;
 | 
						|
			info->size = 0x00400000;
 | 
						|
			break;	/* => 4 MB	*/
 | 
						|
		default:
 | 
						|
			info->flash_id = FLASH_UNKNOWN;
 | 
						|
			return (0);	/* => no or unknown flash */
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->flash_id & FLASH_BTYPE) {
 | 
						|
		/* set sector offsets for bottom boot block type        */
 | 
						|
		info->start[0] = base + 0x00000000;
 | 
						|
		info->start[1] = base + 0x00002000;
 | 
						|
		info->start[2] = base + 0x00004000;
 | 
						|
		info->start[3] = base + 0x00006000;
 | 
						|
		info->start[4] = base + 0x00008000;
 | 
						|
		info->start[5] = base + 0x0000a000;
 | 
						|
		info->start[6] = base + 0x0000c000;
 | 
						|
		info->start[7] = base + 0x0000e000;
 | 
						|
 | 
						|
		for (i = 8; i < info->sector_count; i++)
 | 
						|
			info->start[i] = base + (i * 0x00010000) - 0x00070000;
 | 
						|
	} else {
 | 
						|
		/* set sector offsets for top boot block type           */
 | 
						|
		i = info->sector_count - 1;
 | 
						|
		info->start[i--] = base + info->size - 0x00002000;
 | 
						|
		info->start[i--] = base + info->size - 0x00004000;
 | 
						|
		info->start[i--] = base + info->size - 0x00006000;
 | 
						|
		info->start[i--] = base + info->size - 0x00008000;
 | 
						|
		info->start[i--] = base + info->size - 0x0000a000;
 | 
						|
		info->start[i--] = base + info->size - 0x0000c000;
 | 
						|
		info->start[i--] = base + info->size - 0x0000e000;
 | 
						|
 | 
						|
		for (; i >= 0; i--)
 | 
						|
			info->start[i] = base + i * 0x00010000;
 | 
						|
	}
 | 
						|
 | 
						|
	/* check for protected sectors */
 | 
						|
	for (i = 0; i < info->sector_count; i++) {
 | 
						|
		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 | 
						|
		/* D0 = 1 if protected */
 | 
						|
		addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]);
 | 
						|
 | 
						|
		info->protect[i] = addr2[2] & 1;
 | 
						|
	}
 | 
						|
 | 
						|
	/* issue bank reset to return to read mode */
 | 
						|
	addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000;
 | 
						|
 | 
						|
	return (info->size);
 | 
						|
}
 | 
						|
 | 
						|
static int wait_for_DQ7_16(flash_info_t * info, int sect)
 | 
						|
{
 | 
						|
	ulong start, now, last;
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr =
 | 
						|
		(CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 | 
						|
 | 
						|
	start = get_timer(0);
 | 
						|
	last = start;
 | 
						|
	while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) !=
 | 
						|
			(CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) {
 | 
						|
		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
 | 
						|
			printf("Timeout\n");
 | 
						|
			return -1;
 | 
						|
		}
 | 
						|
		/* show that we're waiting */
 | 
						|
		if ((now - last) > 1000) {	/* every second */
 | 
						|
			putc('.');
 | 
						|
			last = now;
 | 
						|
		}
 | 
						|
	}
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int flash_erase_16(flash_info_t * info, int s_first, int s_last)
 | 
						|
{
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
 | 
						|
	int flag, prot, sect;
 | 
						|
 | 
						|
	if ((s_first < 0) || (s_first > s_last)) {
 | 
						|
		if (info->flash_id == FLASH_UNKNOWN)
 | 
						|
			printf("- missing\n");
 | 
						|
		else
 | 
						|
			printf("- no sectors to erase\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	if (info->flash_id == FLASH_UNKNOWN) {
 | 
						|
		printf("Can't erase unknown flash type - aborted\n");
 | 
						|
		return 1;
 | 
						|
	}
 | 
						|
 | 
						|
	prot = 0;
 | 
						|
	for (sect = s_first; sect <= s_last; ++sect) {
 | 
						|
		if (info->protect[sect])
 | 
						|
			prot++;
 | 
						|
	}
 | 
						|
 | 
						|
	if (prot)
 | 
						|
		printf("- Warning: %d protected sectors will not be erased!",	prot);
 | 
						|
 | 
						|
	printf("\n");
 | 
						|
 | 
						|
	/* Disable interrupts which might cause a timeout here */
 | 
						|
	flag = disable_interrupts();
 | 
						|
 | 
						|
	/* Start erase on unprotected sectors */
 | 
						|
	for (sect = s_first; sect <= s_last; sect++) {
 | 
						|
		if (info->protect[sect] == 0) {	/* not protected */
 | 
						|
			addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
 | 
						|
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
 | 
						|
			addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
 | 
						|
			addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30003000;	/* sector erase */
 | 
						|
 | 
						|
			/*
 | 
						|
			 * Wait for each sector to complete, it's more
 | 
						|
			 * reliable.  According to AMD Spec, you must
 | 
						|
			 * issue all erase commands within a specified
 | 
						|
			 * timeout.  This has been seen to fail, especially
 | 
						|
			 * if printf()s are included (for debug)!!
 | 
						|
			 */
 | 
						|
			wait_for_DQ7_16(info, sect);
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	/* re-enable interrupts if necessary */
 | 
						|
	if (flag)
 | 
						|
		enable_interrupts();
 | 
						|
 | 
						|
	/* wait at least 80us - let's wait 1 ms */
 | 
						|
	udelay(1000);
 | 
						|
 | 
						|
	/* reset to read mode */
 | 
						|
	addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0];
 | 
						|
	addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000;	/* reset bank */
 | 
						|
 | 
						|
	printf(" done\n");
 | 
						|
	return 0;
 | 
						|
}
 | 
						|
 | 
						|
static int write_word_16(flash_info_t * info, ulong dest, ulong data)
 | 
						|
{
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest;
 | 
						|
	ulong *datap = &data;
 | 
						|
	volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 =
 | 
						|
			(volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap;
 | 
						|
	ulong start;
 | 
						|
	int i;
 | 
						|
 | 
						|
	/* Check if Flash is (sufficiently) erased */
 | 
						|
	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 | 
						|
		if ((dest2[i] & swap16(data2[i])) != swap16(data2[i]))
 | 
						|
			return (2);
 | 
						|
	}
 | 
						|
 | 
						|
	for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) {
 | 
						|
		int flag;
 | 
						|
 | 
						|
		/* Disable interrupts which might cause a timeout here */
 | 
						|
		flag = disable_interrupts();
 | 
						|
 | 
						|
		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00;
 | 
						|
		addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500;
 | 
						|
		addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA000A000;
 | 
						|
 | 
						|
		dest2[i] = swap16(data2[i]);
 | 
						|
 | 
						|
		/* re-enable interrupts if necessary */
 | 
						|
		if (flag)
 | 
						|
			enable_interrupts();
 | 
						|
 | 
						|
		/* data polling for D7 */
 | 
						|
		start = get_timer(0);
 | 
						|
		while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) !=
 | 
						|
				(swap16(data2[i]) & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000)) {
 | 
						|
 | 
						|
			if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
 | 
						|
				return (1);
 | 
						|
			}
 | 
						|
		}
 | 
						|
	}
 | 
						|
 | 
						|
	return (0);
 | 
						|
}
 | 
						|
#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */
 | 
						|
 | 
						|
/*-----------------------------------------------------------------------
 | 
						|
 * Functions
 | 
						|
 */
 | 
						|
static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 | 
						|
static int write_word(flash_info_t * info, ulong dest, ulong data);
 | 
						|
 | 
						|
/*-----------------------------------------------------------------------
 | 
						|
 */
 | 
						|
 | 
						|
unsigned long flash_init(void)
 | 
						|
{
 | 
						|
	unsigned long total_b = 0;
 | 
						|
	unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS];
 | 
						|
	unsigned short index = 0;
 | 
						|
	int i;
 | 
						|
 | 
						|
	DEBUGF("\n");
 | 
						|
	DEBUGF("FLASH: Index: %d\n", index);
 | 
						|
 | 
						|
	/* Init: no FLASHes known */
 | 
						|
	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
 | 
						|
		flash_info[i].flash_id = FLASH_UNKNOWN;
 | 
						|
		flash_info[i].sector_count = -1;
 | 
						|
		flash_info[i].size = 0;
 | 
						|
 | 
						|
		/* check whether the address is 0 */
 | 
						|
		if (flash_addr_table[index][i] == 0)
 | 
						|
			continue;
 | 
						|
 | 
						|
		/* call flash_get_size() to initialize sector address */
 | 
						|
		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i],
 | 
						|
				&flash_info[i]);
 | 
						|
 | 
						|
		flash_info[i].size = size_b[i];
 | 
						|
 | 
						|
		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
 | 
						|
			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
 | 
						|
					i+1, size_b[i], size_b[i] << 20);
 | 
						|
			flash_info[i].sector_count = -1;
 | 
						|
			flash_info[i].size = 0;
 | 
						|
		}
 | 
						|
 | 
						|
		/* Monitor protection ON by default */
 | 
						|
		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE,
 | 
						|
				    CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1,
 | 
						|
				    &flash_info[i]);
 | 
						|
#if defined(CONFIG_ENV_IS_IN_FLASH)
 | 
						|
		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR,
 | 
						|
				    CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1,
 | 
						|
				    &flash_info[i]);
 | 
						|
#if defined(CONFIG_ENV_ADDR_REDUND)
 | 
						|
		(void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND,
 | 
						|
				    CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1,
 | 
						|
				    &flash_info[i]);
 | 
						|
#endif
 | 
						|
#endif
 | 
						|
		total_b += flash_info[i].size;
 | 
						|
	}
 | 
						|
 | 
						|
	return total_b;
 | 
						|
}
 | 
						|
#endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */
 |