103 lines
2.9 KiB
C
103 lines
2.9 KiB
C
/*
|
|
* NS16550 Serial Port
|
|
* originally from linux source (arch/powerpc/boot/ns16550.h)
|
|
* modified slightly to
|
|
* have addresses as offsets from CONFIG_SYS_ISA_BASE
|
|
* added a few more definitions
|
|
* added prototypes for ns16550.c
|
|
* reduced no of com ports to 2
|
|
* modifications (c) Rob Taylor, Flying Pig Systems. 2000.
|
|
*
|
|
* further modified to support the DUART in the Galileo eval board
|
|
* modifications (c) Josh Huber <huber@mclx.com>, Mission Critical Linux, Inc.
|
|
*/
|
|
|
|
#ifndef __NS16550_H__
|
|
#define __NS16550_H__
|
|
|
|
/* the padding is necessary because on the galileo board the UART is
|
|
wired in with the 3 address lines shifted over by 2 bits */
|
|
struct NS16550
|
|
{
|
|
unsigned char rbr; /* 0 = 0-3*/
|
|
int pad1:24;
|
|
|
|
unsigned char ier; /* 1 = 4-7*/
|
|
int pad2:24;
|
|
|
|
unsigned char fcr; /* 2 = 8-b*/
|
|
int pad3:24;
|
|
|
|
unsigned char lcr; /* 3 = c-f*/
|
|
int pad4:24;
|
|
|
|
unsigned char mcr; /* 4 = 10-13*/
|
|
int pad5:24;
|
|
|
|
unsigned char lsr; /* 5 = 14-17*/
|
|
int pad6:24;
|
|
|
|
unsigned char msr; /* 6 =18-1b*/
|
|
int pad7:24;
|
|
|
|
unsigned char scr; /* 7 =1c-1f*/
|
|
int pad8:24;
|
|
} __attribute__ ((packed));
|
|
|
|
/* aliases */
|
|
#define thr rbr
|
|
#define iir fcr
|
|
#define dll rbr
|
|
#define dlm ier
|
|
|
|
#define FCR_FIFO_EN 0x01 /*fifo enable*/
|
|
#define FCR_RXSR 0x02 /*reciever soft reset*/
|
|
#define FCR_TXSR 0x04 /*transmitter soft reset*/
|
|
|
|
|
|
#define MCR_DTR 0x01
|
|
#define MCR_RTS 0x02
|
|
#define MCR_DMA_EN 0x04
|
|
#define MCR_TX_DFR 0x08
|
|
|
|
|
|
#define LCR_WLS_MSK 0x03 /* character length slect mask*/
|
|
#define LCR_WLS_5 0x00 /* 5 bit character length */
|
|
#define LCR_WLS_6 0x01 /* 6 bit character length */
|
|
#define LCR_WLS_7 0x02 /* 7 bit character length */
|
|
#define LCR_WLS_8 0x03 /* 8 bit character length */
|
|
#define LCR_STB 0x04 /* Number of stop Bits, off = 1, on = 1.5 or 2) */
|
|
#define LCR_PEN 0x08 /* Parity eneble*/
|
|
#define LCR_EPS 0x10 /* Even Parity Select*/
|
|
#define LCR_STKP 0x20 /* Stick Parity*/
|
|
#define LCR_SBRK 0x40 /* Set Break*/
|
|
#define LCR_BKSE 0x80 /* Bank select enable*/
|
|
|
|
#define LSR_DR 0x01 /* Data ready */
|
|
#define LSR_OE 0x02 /* Overrun */
|
|
#define LSR_PE 0x04 /* Parity error */
|
|
#define LSR_FE 0x08 /* Framing error */
|
|
#define LSR_BI 0x10 /* Break */
|
|
#define LSR_THRE 0x20 /* Xmit holding register empty */
|
|
#define LSR_TEMT 0x40 /* Xmitter empty */
|
|
#define LSR_ERR 0x80 /* Error */
|
|
|
|
/* useful defaults for LCR*/
|
|
#define LCR_8N1 0x03
|
|
|
|
|
|
#define COM1 0x03F8
|
|
#define COM2 0x02F8
|
|
|
|
volatile struct NS16550 * NS16550_init(int chan, int baud_divisor);
|
|
void NS16550_putc(volatile struct NS16550 *com_port, unsigned char c);
|
|
unsigned char NS16550_getc(volatile struct NS16550 *com_port);
|
|
int NS16550_tstc(volatile struct NS16550 *com_port);
|
|
void NS16550_reinit(volatile struct NS16550 *com_port, int baud_divisor);
|
|
|
|
typedef struct NS16550 *NS16550_t;
|
|
|
|
extern const NS16550_t COM_PORTS[];
|
|
|
|
#endif
|