Tom Rini 6507f133f3 SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux ... In SPL (CONFIG_SPL_FRAMEWORK) board_init_f must setup the stack pointer, clear the BSS and call board_init_r. We mark this as weak as some platforms may need to perform additional initalization at this point. We provide a gd that we know will be in a usable location, once the BSS has been cleared to help with this as well. Finally, we no longer call relocate_code so remove that from the armv7 version. Next, both board_init_f and jump_to_image_linux are going to be inherently arch-specific, so move these versions to arch/arm/lib/spl.c Signed-off-by: Tom Rini <trini@ti.com>		2012-09-27 09:49:59 -07:00
..
Makefile	SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux	2012-09-27 09:49:59 -07:00
_ashldi3.S	…
_ashrdi3.S	…
_divsi3.S	…
_lshrdi3.S	…
_modsi3.S	…
_udivsi3.S	…
_umodsi3.S	…
board.c	arm: Adds board_postclk_init to the init_sequence.	2012-09-04 22:05:55 +02:00
bootm.c	arm: restore fdt_fixup_ethernet call to do_bootm_linux	2012-04-23 22:11:18 +02:00
cache-cp15.c	ARM: cache: Move the cp15 CR register read before flushing the cache.	2012-07-07 14:07:44 +02:00
cache-pl310.c	armv7: cache: remove flush on un-aligned invalidate	2011-09-04 11:36:16 +02:00
cache.c	arm: do not force d-cache enable on all boards	2011-09-04 11:36:16 +02:00
div0.c	…
eabi_compat.c	arm: Don't use printf() in SPL builds	2012-07-07 14:07:43 +02:00
interrupts.c	Drop support for CONFIG_SYS_ARM_WITHOUT_RELOC	2010-10-29 21:39:59 +02:00
memcpy.S	arm: lib: memcpy: Do not copy to same address	2011-09-03 22:40:45 +02:00
memset.S	arm: Use optimized memcpy and memset from linux	2011-04-27 19:38:07 +02:00
reset.c	Make sure that argv[] argument pointers are not modified.	2010-07-04 23:55:42 +02:00
spl.c	SPL: Create arch/arm/lib/spl.c for board_init_f and jump_to_image_linux	2012-09-27 09:49:59 -07:00