LM
/
u-boot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
u-boot/drivers/video/sunxi/sunxi_display.c

1326 lines
38 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* Display driver for Allwinner SoCs.
*
* (C) Copyright 2013-2014 Luc Verhaegen <libv@skynet.be>
* (C) Copyright 2014-2015 Hans de Goede <hdegoede@redhat.com>
*/
#include <common.h>
#include <efi_loader.h>
#include <asm/arch/clock.h>
#include <asm/arch/display.h>
#include <asm/arch/gpio.h>
#include <asm/arch/lcdc.h>
#include <asm/arch/pwm.h>
#include <asm/arch/tve.h>
#include <asm/global_data.h>
#include <asm/gpio.h>
#include <asm/io.h>
#include <axp_pmic.h>
#include <errno.h>
#include <fdtdec.h>
#include <fdt_support.h>
#include <i2c.h>
#include <malloc.h>
#include <video_fb.h>
#include "../videomodes.h"
#include "../anx9804.h"
#include "../hitachi_tx18d42vm_lcd.h"
#include "../ssd2828.h"
#include "simplefb_common.h"
#ifdef CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW
#define PWM_ON 0
#define PWM_OFF 1
#else
#define PWM_ON 1
#define PWM_OFF 0
#endif
DECLARE_GLOBAL_DATA_PTR;
enum sunxi_monitor {
sunxi_monitor_none,
sunxi_monitor_dvi,
sunxi_monitor_hdmi,
sunxi_monitor_lcd,
sunxi_monitor_vga,
sunxi_monitor_composite_pal,
sunxi_monitor_composite_ntsc,
sunxi_monitor_composite_pal_m,
sunxi_monitor_composite_pal_nc,
};
#define SUNXI_MONITOR_LAST sunxi_monitor_composite_pal_nc
struct sunxi_display {
GraphicDevice graphic_device;
enum sunxi_monitor monitor;
unsigned int depth;
unsigned int fb_addr;
unsigned int fb_size;
} sunxi_display;
const struct ctfb_res_modes composite_video_modes[2] = {
/* x y hz pixclk ps/kHz le ri up lo hs vs s vmode */
{ 720, 576, 50, 37037, 27000, 137, 5, 20, 27, 2, 2, 0, FB_VMODE_INTERLACED },
{ 720, 480, 60, 37037, 27000, 116, 20, 16, 27, 2, 2, 0, FB_VMODE_INTERLACED },
};
#ifdef CONFIG_VIDEO_HDMI
/*
* Wait up to 200ms for value to be set in given part of reg.
*/
static int await_completion(u32 *reg, u32 mask, u32 val)
{
unsigned long tmo = timer_get_us() + 200000;
while ((readl(reg) & mask) != val) {
if (timer_get_us() > tmo) {
printf("DDC: timeout reading EDID\n");
return -ETIME;
}
}
return 0;
}
static int sunxi_hdmi_hpd_detect(int hpd_delay)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
unsigned long tmo = timer_get_us() + hpd_delay * 1000;
/* Set pll3 to 300MHz */
clock_set_pll3(300000000);
/* Set hdmi parent to pll3 */
clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
CCM_HDMI_CTRL_PLL3);
/* Set ahb gating to pass */
#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
#endif
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
/* Clock on */
setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
writel(SUNXI_HDMI_CTRL_ENABLE, &hdmi->ctrl);
writel(SUNXI_HDMI_PAD_CTRL0_HDP, &hdmi->pad_ctrl0);
/* Enable PLLs for eventual DDC */
writel(SUNXI_HDMI_PAD_CTRL1 | SUNXI_HDMI_PAD_CTRL1_HALVE,
&hdmi->pad_ctrl1);
writel(SUNXI_HDMI_PLL_CTRL | SUNXI_HDMI_PLL_CTRL_DIV(15),
&hdmi->pll_ctrl);
writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
while (timer_get_us() < tmo) {
if (readl(&hdmi->hpd) & SUNXI_HDMI_HPD_DETECT)
return 1;
}
return 0;
}
static void sunxi_hdmi_shutdown(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
clrbits_le32(&hdmi->ctrl, SUNXI_HDMI_CTRL_ENABLE);
clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
clrbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
#ifdef CONFIG_SUNXI_GEN_SUN6I
clrbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
#endif
clock_set_pll3(0);
}
static int sunxi_hdmi_ddc_do_command(u32 cmnd, int offset, int n)
{
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
setbits_le32(&hdmi->ddc_fifo_ctrl, SUNXI_HDMI_DDC_FIFO_CTRL_CLEAR);
writel(SUNXI_HMDI_DDC_ADDR_EDDC_SEGMENT(offset >> 8) |
SUNXI_HMDI_DDC_ADDR_EDDC_ADDR |
SUNXI_HMDI_DDC_ADDR_OFFSET(offset) |
SUNXI_HMDI_DDC_ADDR_SLAVE_ADDR, &hdmi->ddc_addr);
#ifndef CONFIG_MACH_SUN6I
writel(n, &hdmi->ddc_byte_count);
writel(cmnd, &hdmi->ddc_cmnd);
#else
writel(n << 16 | cmnd, &hdmi->ddc_cmnd);
#endif
setbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START);
return await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_START, 0);
}
static int sunxi_hdmi_ddc_read(int offset, u8 *buf, int count)
{
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
int i, n;
while (count > 0) {
if (count > 16)
n = 16;
else
n = count;
if (sunxi_hdmi_ddc_do_command(
SUNXI_HDMI_DDC_CMND_EXPLICIT_EDDC_READ,
offset, n))
return -ETIME;
for (i = 0; i < n; i++)
*buf++ = readb(&hdmi->ddc_fifo_data);
offset += n;
count -= n;
}
return 0;
}
static int sunxi_hdmi_edid_get_block(int block, u8 *buf)
{
int r, retries = 2;
do {
r = sunxi_hdmi_ddc_read(block * 128, buf, 128);
if (r)
continue;
r = edid_check_checksum(buf);
if (r) {
printf("EDID block %d: checksum error%s\n",
block, retries ? ", retrying" : "");
}
} while (r && retries--);
return r;
}
static int sunxi_hdmi_edid_get_mode(struct ctfb_res_modes *mode,
bool verbose_mode)
{
struct edid1_info edid1;
struct edid_cea861_info cea681[4];
struct edid_detailed_timing *t =
(struct edid_detailed_timing *)edid1.monitor_details.timing;
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int i, r, ext_blocks = 0;
/* Reset i2c controller */
setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE);
writel(SUNXI_HMDI_DDC_CTRL_ENABLE |
SUNXI_HMDI_DDC_CTRL_SDA_ENABLE |
SUNXI_HMDI_DDC_CTRL_SCL_ENABLE |
SUNXI_HMDI_DDC_CTRL_RESET, &hdmi->ddc_ctrl);
if (await_completion(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_RESET, 0))
return -EIO;
writel(SUNXI_HDMI_DDC_CLOCK, &hdmi->ddc_clock);
#ifndef CONFIG_MACH_SUN6I
writel(SUNXI_HMDI_DDC_LINE_CTRL_SDA_ENABLE |
SUNXI_HMDI_DDC_LINE_CTRL_SCL_ENABLE, &hdmi->ddc_line_ctrl);
#endif
r = sunxi_hdmi_edid_get_block(0, (u8 *)&edid1);
if (r == 0) {
r = edid_check_info(&edid1);
if (r) {
if (verbose_mode)
printf("EDID: invalid EDID data\n");
r = -EINVAL;
}
}
if (r == 0) {
ext_blocks = edid1.extension_flag;
if (ext_blocks > 4)
ext_blocks = 4;
for (i = 0; i < ext_blocks; i++) {
if (sunxi_hdmi_edid_get_block(1 + i,
(u8 *)&cea681[i]) != 0) {
ext_blocks = i;
break;
}
}
}
/* Disable DDC engine, no longer needed */
clrbits_le32(&hdmi->ddc_ctrl, SUNXI_HMDI_DDC_CTRL_ENABLE);
clrbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_DDC_GATE);
if (r)
return r;
/* We want version 1.3 or 1.2 with detailed timing info */
if (edid1.version != 1 || (edid1.revision < 3 &&
!EDID1_INFO_FEATURE_PREFERRED_TIMING_MODE(edid1))) {
printf("EDID: unsupported version %d.%d\n",
edid1.version, edid1.revision);
return -EINVAL;
}
/* Take the first usable detailed timing */
for (i = 0; i < 4; i++, t++) {
r = video_edid_dtd_to_ctfb_res_modes(t, mode);
if (r == 0)
break;
}
if (i == 4) {
printf("EDID: no usable detailed timing found\n");
return -ENOENT;
}
/* Check for basic audio support, if found enable hdmi output */
sunxi_display.monitor = sunxi_monitor_dvi;
for (i = 0; i < ext_blocks; i++) {
if (cea681[i].extension_tag != EDID_CEA861_EXTENSION_TAG ||
cea681[i].revision < 2)
continue;
if (EDID_CEA861_SUPPORTS_BASIC_AUDIO(cea681[i]))
sunxi_display.monitor = sunxi_monitor_hdmi;
}
return 0;
}
#endif /* CONFIG_VIDEO_HDMI */
#ifdef CONFIG_MACH_SUN4I
/*
* Testing has shown that on sun4i the display backend engine does not have
* deep enough fifo-s causing flickering / tearing in full-hd mode due to
* fifo underruns. So on sun4i we use the display frontend engine to do the
* dma from memory, as the frontend does have deep enough fifo-s.
*/
static const u32 sun4i_vert_coef[32] = {
0x00004000, 0x000140ff, 0x00033ffe, 0x00043ffd,
0x00063efc, 0xff083dfc, 0x000a3bfb, 0xff0d39fb,
0xff0f37fb, 0xff1136fa, 0xfe1433fb, 0xfe1631fb,
0xfd192ffb, 0xfd1c2cfb, 0xfd1f29fb, 0xfc2127fc,
0xfc2424fc, 0xfc2721fc, 0xfb291ffd, 0xfb2c1cfd,
0xfb2f19fd, 0xfb3116fe, 0xfb3314fe, 0xfa3611ff,
0xfb370fff, 0xfb390dff, 0xfb3b0a00, 0xfc3d08ff,
0xfc3e0600, 0xfd3f0400, 0xfe3f0300, 0xff400100,
};
static const u32 sun4i_horz_coef[64] = {
0x40000000, 0x00000000, 0x40fe0000, 0x0000ff03,
0x3ffd0000, 0x0000ff05, 0x3ffc0000, 0x0000ff06,
0x3efb0000, 0x0000ff08, 0x3dfb0000, 0x0000ff09,
0x3bfa0000, 0x0000fe0d, 0x39fa0000, 0x0000fe0f,
0x38fa0000, 0x0000fe10, 0x36fa0000, 0x0000fe12,
0x33fa0000, 0x0000fd16, 0x31fa0000, 0x0000fd18,
0x2ffa0000, 0x0000fd1a, 0x2cfa0000, 0x0000fc1e,
0x29fa0000, 0x0000fc21, 0x27fb0000, 0x0000fb23,
0x24fb0000, 0x0000fb26, 0x21fb0000, 0x0000fb29,
0x1ffc0000, 0x0000fa2b, 0x1cfc0000, 0x0000fa2e,
0x19fd0000, 0x0000fa30, 0x16fd0000, 0x0000fa33,
0x14fd0000, 0x0000fa35, 0x11fe0000, 0x0000fa37,
0x0ffe0000, 0x0000fa39, 0x0dfe0000, 0x0000fa3b,
0x0afe0000, 0x0000fa3e, 0x08ff0000, 0x0000fb3e,
0x06ff0000, 0x0000fb40, 0x05ff0000, 0x0000fc40,
0x03ff0000, 0x0000fd41, 0x01ff0000, 0x0000fe42,
};
static void sunxi_frontend_init(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_de_fe_reg * const de_fe =
(struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE;
int i;
/* Clocks on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_FE0);
setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_FE0);
clock_set_de_mod_clock(&ccm->fe0_clk_cfg, 300000000);
setbits_le32(&de_fe->enable, SUNXI_DE_FE_ENABLE_EN);
for (i = 0; i < 32; i++) {
writel(sun4i_horz_coef[2 * i], &de_fe->ch0_horzcoef0[i]);
writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch0_horzcoef1[i]);
writel(sun4i_vert_coef[i], &de_fe->ch0_vertcoef[i]);
writel(sun4i_horz_coef[2 * i], &de_fe->ch1_horzcoef0[i]);
writel(sun4i_horz_coef[2 * i + 1], &de_fe->ch1_horzcoef1[i]);
writel(sun4i_vert_coef[i], &de_fe->ch1_vertcoef[i]);
}
setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_COEF_RDY);
}
static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode,
unsigned int address)
{
struct sunxi_de_fe_reg * const de_fe =
(struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE;
setbits_le32(&de_fe->bypass, SUNXI_DE_FE_BYPASS_CSC_BYPASS);
writel(CONFIG_SYS_SDRAM_BASE + address, &de_fe->ch0_addr);
writel(mode->xres * 4, &de_fe->ch0_stride);
writel(SUNXI_DE_FE_INPUT_FMT_ARGB8888, &de_fe->input_fmt);
writel(SUNXI_DE_FE_OUTPUT_FMT_ARGB8888, &de_fe->output_fmt);
writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
&de_fe->ch0_insize);
writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
&de_fe->ch0_outsize);
writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_horzfact);
writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch0_vertfact);
writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
&de_fe->ch1_insize);
writel(SUNXI_DE_FE_HEIGHT(mode->yres) | SUNXI_DE_FE_WIDTH(mode->xres),
&de_fe->ch1_outsize);
writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_horzfact);
writel(SUNXI_DE_FE_FACTOR_INT(1), &de_fe->ch1_vertfact);
setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_REG_RDY);
}
static void sunxi_frontend_enable(void)
{
struct sunxi_de_fe_reg * const de_fe =
(struct sunxi_de_fe_reg *)SUNXI_DE_FE0_BASE;
setbits_le32(&de_fe->frame_ctrl, SUNXI_DE_FE_FRAME_CTRL_FRM_START);
}
#else
static void sunxi_frontend_init(void) {}
static void sunxi_frontend_mode_set(const struct ctfb_res_modes *mode,
unsigned int address) {}
static void sunxi_frontend_enable(void) {}
#endif
static bool sunxi_is_composite(void)
{
switch (sunxi_display.monitor) {
case sunxi_monitor_none:
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
case sunxi_monitor_lcd:
case sunxi_monitor_vga:
return false;
case sunxi_monitor_composite_pal:
case sunxi_monitor_composite_ntsc:
case sunxi_monitor_composite_pal_m:
case sunxi_monitor_composite_pal_nc:
return true;
}
return false; /* Never reached */
}
/*
* This is the entity that mixes and matches the different layers and inputs.
* Allwinner calls it the back-end, but i like composer better.
*/
static void sunxi_composer_init(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
int i;
sunxi_frontend_init();
#ifdef CONFIG_SUNXI_GEN_SUN6I
/* Reset off */
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DE_BE0);
#endif
/* Clocks on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_DE_BE0);
#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */
setbits_le32(&ccm->dram_clk_gate, 1 << CCM_DRAM_GATE_OFFSET_DE_BE0);
#endif
clock_set_de_mod_clock(&ccm->be0_clk_cfg, 300000000);
/* Engine bug, clear registers after reset */
for (i = 0x0800; i < 0x1000; i += 4)
writel(0, SUNXI_DE_BE0_BASE + i);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_ENABLE);
}
static const u32 sunxi_rgb2yuv_coef[12] = {
0x00000107, 0x00000204, 0x00000064, 0x00000108,
0x00003f69, 0x00003ed6, 0x000001c1, 0x00000808,
0x000001c1, 0x00003e88, 0x00003fb8, 0x00000808
};
static void sunxi_composer_mode_set(const struct ctfb_res_modes *mode,
unsigned int address)
{
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
int i;
sunxi_frontend_mode_set(mode, address);
writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
&de_be->disp_size);
writel(SUNXI_DE_BE_HEIGHT(mode->yres) | SUNXI_DE_BE_WIDTH(mode->xres),
&de_be->layer0_size);
#ifndef CONFIG_MACH_SUN4I /* On sun4i the frontend does the dma */
writel(SUNXI_DE_BE_LAYER_STRIDE(mode->xres), &de_be->layer0_stride);
writel(address << 3, &de_be->layer0_addr_low32b);
writel(address >> 29, &de_be->layer0_addr_high4b);
#else
writel(SUNXI_DE_BE_LAYER_ATTR0_SRC_FE0, &de_be->layer0_attr0_ctrl);
#endif
writel(SUNXI_DE_BE_LAYER_ATTR1_FMT_XRGB8888, &de_be->layer0_attr1_ctrl);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_LAYER0_ENABLE);
if (mode->vmode == FB_VMODE_INTERLACED)
setbits_le32(&de_be->mode,
#ifndef CONFIG_MACH_SUN5I
SUNXI_DE_BE_MODE_DEFLICKER_ENABLE |
#endif
SUNXI_DE_BE_MODE_INTERLACE_ENABLE);
if (sunxi_is_composite()) {
writel(SUNXI_DE_BE_OUTPUT_COLOR_CTRL_ENABLE,
&de_be->output_color_ctrl);
for (i = 0; i < 12; i++)
writel(sunxi_rgb2yuv_coef[i],
&de_be->output_color_coef[i]);
}
}
static void sunxi_composer_enable(void)
{
struct sunxi_de_be_reg * const de_be =
(struct sunxi_de_be_reg *)SUNXI_DE_BE0_BASE;
sunxi_frontend_enable();
setbits_le32(&de_be->reg_ctrl, SUNXI_DE_BE_REG_CTRL_LOAD_REGS);
setbits_le32(&de_be->mode, SUNXI_DE_BE_MODE_START);
}
static void sunxi_lcdc_init(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
/* Reset off */
#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
#else
setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_RST);
#endif
/* Clock on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
#ifdef CONFIG_VIDEO_LCD_IF_LVDS
#ifdef CONFIG_SUNXI_GEN_SUN6I
setbits_le32(&ccm->ahb_reset2_cfg, 1 << AHB_RESET_OFFSET_LVDS);
#else
setbits_le32(&ccm->lvds_clk_cfg, CCM_LVDS_CTRL_RST);
#endif
#endif
lcdc_init(lcdc);
}
static void sunxi_lcdc_panel_enable(void)
{
int pin, reset_pin;
/*
* Start with backlight disabled to avoid the screen flashing to
* white while the lcd inits.
*/
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
if (pin >= 0) {
gpio_request(pin, "lcd_backlight_enable");
gpio_direction_output(pin, 0);
}
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
if (pin >= 0) {
gpio_request(pin, "lcd_backlight_pwm");
gpio_direction_output(pin, PWM_OFF);
}
reset_pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_RESET);
if (reset_pin >= 0) {
gpio_request(reset_pin, "lcd_reset");
gpio_direction_output(reset_pin, 0); /* Assert reset */
}
/* Give the backlight some time to turn off and power up the panel. */
mdelay(40);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_POWER);
if (pin >= 0) {
gpio_request(pin, "lcd_power");
gpio_direction_output(pin, 1);
}
if (reset_pin >= 0)
gpio_direction_output(reset_pin, 1); /* De-assert reset */
}
static void sunxi_lcdc_backlight_enable(void)
{
int pin;
/*
* We want to have scanned out at least one frame before enabling the
* backlight to avoid the screen flashing to white when we enable it.
*/
mdelay(40);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_EN);
if (pin >= 0)
gpio_direction_output(pin, 1);
pin = sunxi_name_to_gpio(CONFIG_VIDEO_LCD_BL_PWM);
#ifdef SUNXI_PWM_PIN0
if (pin == SUNXI_PWM_PIN0) {
writel(SUNXI_PWM_CTRL_POLARITY0(PWM_ON) |
SUNXI_PWM_CTRL_ENABLE0 |
SUNXI_PWM_CTRL_PRESCALE0(0xf), SUNXI_PWM_CTRL_REG);
writel(SUNXI_PWM_PERIOD_80PCT, SUNXI_PWM_CH0_PERIOD);
sunxi_gpio_set_cfgpin(pin, SUNXI_PWM_MUX);
return;
}
#endif
if (pin >= 0)
gpio_direction_output(pin, PWM_ON);
}
static void sunxi_ctfb_mode_to_display_timing(const struct ctfb_res_modes *mode,
struct display_timing *timing)
{
timing->pixelclock.typ = mode->pixclock_khz * 1000;
timing->hactive.typ = mode->xres;
timing->hfront_porch.typ = mode->right_margin;
timing->hback_porch.typ = mode->left_margin;
timing->hsync_len.typ = mode->hsync_len;
timing->vactive.typ = mode->yres;
timing->vfront_porch.typ = mode->lower_margin;
timing->vback_porch.typ = mode->upper_margin;
timing->vsync_len.typ = mode->vsync_len;
timing->flags = 0;
if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
timing->flags |= DISPLAY_FLAGS_HSYNC_HIGH;
else
timing->flags |= DISPLAY_FLAGS_HSYNC_LOW;
if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
timing->flags |= DISPLAY_FLAGS_VSYNC_HIGH;
else
timing->flags |= DISPLAY_FLAGS_VSYNC_LOW;
if (mode->vmode == FB_VMODE_INTERLACED)
timing->flags |= DISPLAY_FLAGS_INTERLACED;
}
static void sunxi_lcdc_tcon0_mode_set(const struct ctfb_res_modes *mode,
bool for_ext_vga_dac)
{
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
int clk_div, clk_double, pin;
struct display_timing timing;
#if defined CONFIG_MACH_SUN8I && defined CONFIG_VIDEO_LCD_IF_LVDS
for (pin = SUNXI_GPD(18); pin <= SUNXI_GPD(27); pin++) {
#else
for (pin = SUNXI_GPD(0); pin <= SUNXI_GPD(27); pin++) {
#endif
#ifdef CONFIG_VIDEO_LCD_IF_PARALLEL
sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LCD0);
#endif
#ifdef CONFIG_VIDEO_LCD_IF_LVDS
sunxi_gpio_set_cfgpin(pin, SUNXI_GPD_LVDS0);
#endif
#ifdef CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804
sunxi_gpio_set_drv(pin, 3);
#endif
}
lcdc_pll_set(ccm, 0, mode->pixclock_khz, &clk_div, &clk_double,
sunxi_is_composite());
sunxi_ctfb_mode_to_display_timing(mode, &timing);
lcdc_tcon0_mode_set(lcdc, &timing, clk_div, for_ext_vga_dac,
sunxi_display.depth, CONFIG_VIDEO_LCD_DCLK_PHASE);
}
#if defined CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_COMPOSITE
static void sunxi_lcdc_tcon1_mode_set(const struct ctfb_res_modes *mode,
int *clk_div, int *clk_double,
bool use_portd_hvsync)
{
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct display_timing timing;
sunxi_ctfb_mode_to_display_timing(mode, &timing);
lcdc_tcon1_mode_set(lcdc, &timing, use_portd_hvsync,
sunxi_is_composite());
if (use_portd_hvsync) {
sunxi_gpio_set_cfgpin(SUNXI_GPD(26), SUNXI_GPD_LCD0);
sunxi_gpio_set_cfgpin(SUNXI_GPD(27), SUNXI_GPD_LCD0);
}
lcdc_pll_set(ccm, 1, mode->pixclock_khz, clk_div, clk_double,
sunxi_is_composite());
}
#endif /* CONFIG_VIDEO_HDMI || defined CONFIG_VIDEO_VGA || CONFIG_VIDEO_COMPOSITE */
#ifdef CONFIG_VIDEO_HDMI
static void sunxi_hdmi_setup_info_frames(const struct ctfb_res_modes *mode)
{
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
u8 checksum = 0;
u8 avi_info_frame[17] = {
0x82, 0x02, 0x0d, 0x00, 0x12, 0x00, 0x88, 0x00,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00
};
u8 vendor_info_frame[19] = {
0x81, 0x01, 0x06, 0x29, 0x03, 0x0c, 0x00, 0x40,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
0x00, 0x00, 0x00
};
int i;
if (mode->pixclock_khz <= 27000)
avi_info_frame[5] = 0x40; /* SD-modes, ITU601 colorspace */
else
avi_info_frame[5] = 0x80; /* HD-modes, ITU709 colorspace */
if (mode->xres * 100 / mode->yres < 156)
avi_info_frame[5] |= 0x18; /* 4 : 3 */
else
avi_info_frame[5] |= 0x28; /* 16 : 9 */
for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++)
checksum += avi_info_frame[i];
avi_info_frame[3] = 0x100 - checksum;
for (i = 0; i < ARRAY_SIZE(avi_info_frame); i++)
writeb(avi_info_frame[i], &hdmi->avi_info_frame[i]);
writel(SUNXI_HDMI_QCP_PACKET0, &hdmi->qcp_packet0);
writel(SUNXI_HDMI_QCP_PACKET1, &hdmi->qcp_packet1);
for (i = 0; i < ARRAY_SIZE(vendor_info_frame); i++)
writeb(vendor_info_frame[i], &hdmi->vendor_info_frame[i]);
writel(SUNXI_HDMI_PKT_CTRL0, &hdmi->pkt_ctrl0);
writel(SUNXI_HDMI_PKT_CTRL1, &hdmi->pkt_ctrl1);
setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_HDMI);
}
static void sunxi_hdmi_mode_set(const struct ctfb_res_modes *mode,
int clk_div, int clk_double)
{
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
int x, y;
/* Write clear interrupt status bits */
writel(SUNXI_HDMI_IRQ_STATUS_BITS, &hdmi->irq);
if (sunxi_display.monitor == sunxi_monitor_hdmi)
sunxi_hdmi_setup_info_frames(mode);
/* Set input sync enable */
writel(SUNXI_HDMI_UNKNOWN_INPUT_SYNC, &hdmi->unknown);
/* Init various registers, select pll3 as clock source */
writel(SUNXI_HDMI_VIDEO_POL_TX_CLK, &hdmi->video_polarity);
writel(SUNXI_HDMI_PAD_CTRL0_RUN, &hdmi->pad_ctrl0);
writel(SUNXI_HDMI_PAD_CTRL1, &hdmi->pad_ctrl1);
writel(SUNXI_HDMI_PLL_CTRL, &hdmi->pll_ctrl);
writel(SUNXI_HDMI_PLL_DBG0_PLL3, &hdmi->pll_dbg0);
/* Setup clk div and doubler */
clrsetbits_le32(&hdmi->pll_ctrl, SUNXI_HDMI_PLL_CTRL_DIV_MASK,
SUNXI_HDMI_PLL_CTRL_DIV(clk_div));
if (!clk_double)
setbits_le32(&hdmi->pad_ctrl1, SUNXI_HDMI_PAD_CTRL1_HALVE);
/* Setup timing registers */
writel(SUNXI_HDMI_Y(mode->yres) | SUNXI_HDMI_X(mode->xres),
&hdmi->video_size);
x = mode->hsync_len + mode->left_margin;
y = mode->vsync_len + mode->upper_margin;
writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_bp);
x = mode->right_margin;
y = mode->lower_margin;
writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_fp);
x = mode->hsync_len;
y = mode->vsync_len;
writel(SUNXI_HDMI_Y(y) | SUNXI_HDMI_X(x), &hdmi->video_spw);
if (mode->sync & FB_SYNC_HOR_HIGH_ACT)
setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_HOR);
if (mode->sync & FB_SYNC_VERT_HIGH_ACT)
setbits_le32(&hdmi->video_polarity, SUNXI_HDMI_VIDEO_POL_VER);
}
static void sunxi_hdmi_enable(void)
{
struct sunxi_hdmi_reg * const hdmi =
(struct sunxi_hdmi_reg *)SUNXI_HDMI_BASE;
udelay(100);
setbits_le32(&hdmi->video_ctrl, SUNXI_HDMI_VIDEO_CTRL_ENABLE);
}
#endif /* CONFIG_VIDEO_HDMI */
#if defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_COMPOSITE
static void sunxi_tvencoder_mode_set(void)
{
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
struct sunxi_tve_reg * const tve =
(struct sunxi_tve_reg *)SUNXI_TVE0_BASE;
/* Reset off */
setbits_le32(&ccm->lcd0_ch0_clk_cfg, CCM_LCD_CH0_CTRL_TVE_RST);
/* Clock on */
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_TVE0);
switch (sunxi_display.monitor) {
case sunxi_monitor_vga:
tvencoder_mode_set(tve, tve_mode_vga);
break;
case sunxi_monitor_composite_pal_nc:
tvencoder_mode_set(tve, tve_mode_composite_pal_nc);
break;
case sunxi_monitor_composite_pal:
tvencoder_mode_set(tve, tve_mode_composite_pal);
break;
case sunxi_monitor_composite_pal_m:
tvencoder_mode_set(tve, tve_mode_composite_pal_m);
break;
case sunxi_monitor_composite_ntsc:
tvencoder_mode_set(tve, tve_mode_composite_ntsc);
break;
case sunxi_monitor_none:
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
case sunxi_monitor_lcd:
break;
}
}
#endif /* CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_COMPOSITE */
static void sunxi_drc_init(void)
{
#ifdef CONFIG_SUNXI_GEN_SUN6I
struct sunxi_ccm_reg * const ccm =
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
/* On sun6i the drc must be clocked even when in pass-through mode */
#ifdef CONFIG_MACH_SUN8I_A33
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_SAT);
#endif
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_DRC0);
clock_set_de_mod_clock(&ccm->iep_drc0_clk_cfg, 300000000);
#endif
}
#ifdef CONFIG_VIDEO_VGA_VIA_LCD
static void sunxi_vga_external_dac_enable(void)
{
int pin;
pin = sunxi_name_to_gpio(CONFIG_VIDEO_VGA_EXTERNAL_DAC_EN);
if (pin >= 0) {
gpio_request(pin, "vga_enable");
gpio_direction_output(pin, 1);
}
}
#endif /* CONFIG_VIDEO_VGA_VIA_LCD */
#ifdef CONFIG_VIDEO_LCD_SSD2828
static int sunxi_ssd2828_init(const struct ctfb_res_modes *mode)
{
struct ssd2828_config cfg = {
.csx_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_CS),
.sck_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_SCLK),
.sdi_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MOSI),
.sdo_pin = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MISO),
.reset_pin = name_to_gpio(CONFIG_VIDEO_LCD_SSD2828_RESET),
.ssd2828_tx_clk_khz = CONFIG_VIDEO_LCD_SSD2828_TX_CLK * 1000,
.ssd2828_color_depth = 24,
#ifdef CONFIG_VIDEO_LCD_PANEL_MIPI_4_LANE_513_MBPS_VIA_SSD2828
.mipi_dsi_number_of_data_lanes = 4,
.mipi_dsi_bitrate_per_data_lane_mbps = 513,
.mipi_dsi_delay_after_exit_sleep_mode_ms = 100,
.mipi_dsi_delay_after_set_display_on_ms = 200
#else
#error MIPI LCD panel needs configuration parameters
#endif
};
if (cfg.csx_pin == -1 || cfg.sck_pin == -1 || cfg.sdi_pin == -1) {
printf("SSD2828: SPI pins are not properly configured\n");
return 1;
}
if (cfg.reset_pin == -1) {
printf("SSD2828: Reset pin is not properly configured\n");
return 1;
}
return ssd2828_init(&cfg, mode);
}
#endif /* CONFIG_VIDEO_LCD_SSD2828 */
static void sunxi_engines_init(void)
{
sunxi_composer_init();
sunxi_lcdc_init();
sunxi_drc_init();
}
static void sunxi_mode_set(const struct ctfb_res_modes *mode,
unsigned int address)
{
int __maybe_unused clk_div, clk_double;
struct sunxi_lcdc_reg * const lcdc =
(struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
struct sunxi_tve_reg * __maybe_unused const tve =
(struct sunxi_tve_reg *)SUNXI_TVE0_BASE;
switch (sunxi_display.monitor) {
case sunxi_monitor_none:
break;
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
#ifdef CONFIG_VIDEO_HDMI
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 0);
sunxi_hdmi_mode_set(mode, clk_div, clk_double);
sunxi_composer_enable();
lcdc_enable(lcdc, sunxi_display.depth);
sunxi_hdmi_enable();
#endif
break;
case sunxi_monitor_lcd:
sunxi_lcdc_panel_enable();
if (IS_ENABLED(CONFIG_VIDEO_LCD_PANEL_EDP_4_LANE_1620M_VIA_ANX9804)) {
/*
* The anx9804 needs 1.8V from eldo3, we do this here
* and not via CONFIG_AXP_ELDO3_VOLT from board_init()
* to avoid turning this on when using hdmi output.
*/
axp_set_eldo(3, 1800);
anx9804_init(CONFIG_VIDEO_LCD_I2C_BUS, 4,
ANX9804_DATA_RATE_1620M,
sunxi_display.depth);
}
if (IS_ENABLED(CONFIG_VIDEO_LCD_HITACHI_TX18D42VM)) {
mdelay(50); /* Wait for lcd controller power on */
hitachi_tx18d42vm_init();
}
if (IS_ENABLED(CONFIG_VIDEO_LCD_TL059WV5C0)) {
unsigned int orig_i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(CONFIG_VIDEO_LCD_I2C_BUS);
i2c_reg_write(0x5c, 0x04, 0x42); /* Turn on the LCD */
i2c_set_bus_num(orig_i2c_bus);
}
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon0_mode_set(mode, false);
sunxi_composer_enable();
lcdc_enable(lcdc, sunxi_display.depth);
#ifdef CONFIG_VIDEO_LCD_SSD2828
sunxi_ssd2828_init(mode);
#endif
sunxi_lcdc_backlight_enable();
break;
case sunxi_monitor_vga:
#ifdef CONFIG_VIDEO_VGA
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 1);
sunxi_tvencoder_mode_set();
sunxi_composer_enable();
lcdc_enable(lcdc, sunxi_display.depth);
tvencoder_enable(tve);
#elif defined CONFIG_VIDEO_VGA_VIA_LCD
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon0_mode_set(mode, true);
sunxi_composer_enable();
lcdc_enable(lcdc, sunxi_display.depth);
sunxi_vga_external_dac_enable();
#endif
break;
case sunxi_monitor_composite_pal:
case sunxi_monitor_composite_ntsc:
case sunxi_monitor_composite_pal_m:
case sunxi_monitor_composite_pal_nc:
#ifdef CONFIG_VIDEO_COMPOSITE
sunxi_composer_mode_set(mode, address);
sunxi_lcdc_tcon1_mode_set(mode, &clk_div, &clk_double, 0);
sunxi_tvencoder_mode_set();
sunxi_composer_enable();
lcdc_enable(lcdc, sunxi_display.depth);
tvencoder_enable(tve);
#endif
break;
}
}
static const char *sunxi_get_mon_desc(enum sunxi_monitor monitor)
{
switch (monitor) {
case sunxi_monitor_none: return "none";
case sunxi_monitor_dvi: return "dvi";
case sunxi_monitor_hdmi: return "hdmi";
case sunxi_monitor_lcd: return "lcd";
case sunxi_monitor_vga: return "vga";
case sunxi_monitor_composite_pal: return "composite-pal";
case sunxi_monitor_composite_ntsc: return "composite-ntsc";
case sunxi_monitor_composite_pal_m: return "composite-pal-m";
case sunxi_monitor_composite_pal_nc: return "composite-pal-nc";
}
return NULL; /* never reached */
}
ulong board_get_usable_ram_top(ulong total_size)
{
return gd->ram_top - CONFIG_SUNXI_MAX_FB_SIZE;
}
static bool sunxi_has_hdmi(void)
{
#ifdef CONFIG_VIDEO_HDMI
return true;
#else
return false;
#endif
}
static bool sunxi_has_lcd(void)
{
char *lcd_mode = CONFIG_VIDEO_LCD_MODE;
return lcd_mode[0] != 0;
}
static bool sunxi_has_vga(void)
{
#if defined CONFIG_VIDEO_VGA || defined CONFIG_VIDEO_VGA_VIA_LCD
return true;
#else
return false;
#endif
}
static bool sunxi_has_composite(void)
{
#ifdef CONFIG_VIDEO_COMPOSITE
return true;
#else
return false;
#endif
}
static enum sunxi_monitor sunxi_get_default_mon(bool allow_hdmi)
{
if (allow_hdmi && sunxi_has_hdmi())
return sunxi_monitor_dvi;
else if (sunxi_has_lcd())
return sunxi_monitor_lcd;
else if (sunxi_has_vga())
return sunxi_monitor_vga;
else if (sunxi_has_composite())
return sunxi_monitor_composite_pal;
else
return sunxi_monitor_none;
}
void *video_hw_init(void)
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
const struct ctfb_res_modes *mode;
struct ctfb_res_modes custom;
const char *options;
#ifdef CONFIG_VIDEO_HDMI
int hpd, hpd_delay, edid;
bool hdmi_present;
#endif
int i, overscan_offset, overscan_x, overscan_y;
unsigned int fb_dma_addr;
char mon[16];
char *lcd_mode = CONFIG_VIDEO_LCD_MODE;
memset(&sunxi_display, 0, sizeof(struct sunxi_display));
video_get_ctfb_res_modes(RES_MODE_1024x768, 24, &mode,
&sunxi_display.depth, &options);
#ifdef CONFIG_VIDEO_HDMI
hpd = video_get_option_int(options, "hpd", 1);
hpd_delay = video_get_option_int(options, "hpd_delay", 500);
edid = video_get_option_int(options, "edid", 1);
#endif
overscan_x = video_get_option_int(options, "overscan_x", -1);
overscan_y = video_get_option_int(options, "overscan_y", -1);
sunxi_display.monitor = sunxi_get_default_mon(true);
video_get_option_string(options, "monitor", mon, sizeof(mon),
sunxi_get_mon_desc(sunxi_display.monitor));
for (i = 0; i <= SUNXI_MONITOR_LAST; i++) {
if (strcmp(mon, sunxi_get_mon_desc(i)) == 0) {
sunxi_display.monitor = i;
break;
}
}
if (i > SUNXI_MONITOR_LAST)
printf("Unknown monitor: '%s', falling back to '%s'\n",
mon, sunxi_get_mon_desc(sunxi_display.monitor));
#ifdef CONFIG_VIDEO_HDMI
/* If HDMI/DVI is selected do HPD & EDID, and handle fallback */
if (sunxi_display.monitor == sunxi_monitor_dvi ||
sunxi_display.monitor == sunxi_monitor_hdmi) {
/* Always call hdp_detect, as it also enables clocks, etc. */
hdmi_present = (sunxi_hdmi_hpd_detect(hpd_delay) == 1);
if (hdmi_present && edid) {
printf("HDMI connected: ");
if (sunxi_hdmi_edid_get_mode(&custom, true) == 0)
mode = &custom;
else
hdmi_present = false;
}
/* Fall back to EDID in case HPD failed */
if (edid && !hdmi_present) {
if (sunxi_hdmi_edid_get_mode(&custom, false) == 0) {
mode = &custom;
hdmi_present = true;
}
}
/* Shut down when display was not found */
if ((hpd || edid) && !hdmi_present) {
sunxi_hdmi_shutdown();
sunxi_display.monitor = sunxi_get_default_mon(false);
} /* else continue with hdmi/dvi without a cable connected */
}
#endif
switch (sunxi_display.monitor) {
case sunxi_monitor_none:
return NULL;
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
if (!sunxi_has_hdmi()) {
printf("HDMI/DVI not supported on this board\n");
sunxi_display.monitor = sunxi_monitor_none;
return NULL;
}
break;
case sunxi_monitor_lcd:
if (!sunxi_has_lcd()) {
printf("LCD not supported on this board\n");
sunxi_display.monitor = sunxi_monitor_none;
return NULL;
}
sunxi_display.depth = video_get_params(&custom, lcd_mode);
mode = &custom;
break;
case sunxi_monitor_vga:
if (!sunxi_has_vga()) {
printf("VGA not supported on this board\n");
sunxi_display.monitor = sunxi_monitor_none;
return NULL;
}
sunxi_display.depth = 18;
break;
case sunxi_monitor_composite_pal:
case sunxi_monitor_composite_ntsc:
case sunxi_monitor_composite_pal_m:
case sunxi_monitor_composite_pal_nc:
if (!sunxi_has_composite()) {
printf("Composite video not supported on this board\n");
sunxi_display.monitor = sunxi_monitor_none;
return NULL;
}
if (sunxi_display.monitor == sunxi_monitor_composite_pal ||
sunxi_display.monitor == sunxi_monitor_composite_pal_nc)
mode = &composite_video_modes[0];
else
mode = &composite_video_modes[1];
sunxi_display.depth = 24;
break;
}
/* Yes these defaults are quite high, overscan on composite sucks... */
if (overscan_x == -1)
overscan_x = sunxi_is_composite() ? 32 : 0;
if (overscan_y == -1)
overscan_y = sunxi_is_composite() ? 20 : 0;
sunxi_display.fb_size =
(mode->xres * mode->yres * 4 + 0xfff) & ~0xfff;
overscan_offset = (overscan_y * mode->xres + overscan_x) * 4;
/* We want to keep the fb_base for simplefb page aligned, where as
* the sunxi dma engines will happily accept an unaligned address. */
if (overscan_offset)
sunxi_display.fb_size += 0x1000;
if (sunxi_display.fb_size > CONFIG_SUNXI_MAX_FB_SIZE) {
printf("Error need %dkB for fb, but only %dkB is reserved\n",
sunxi_display.fb_size >> 10,
CONFIG_SUNXI_MAX_FB_SIZE >> 10);
return NULL;
}
printf("Setting up a %dx%d%s %s console (overscan %dx%d)\n",
mode->xres, mode->yres,
(mode->vmode == FB_VMODE_INTERLACED) ? "i" : "",
sunxi_get_mon_desc(sunxi_display.monitor),
overscan_x, overscan_y);
gd->fb_base = gd->bd->bi_dram[0].start +
gd->bd->bi_dram[0].size - sunxi_display.fb_size;
sunxi_engines_init();
#ifdef CONFIG_EFI_LOADER
efi_add_memory_map(gd->fb_base,
ALIGN(sunxi_display.fb_size, EFI_PAGE_SIZE) >>
EFI_PAGE_SHIFT,
EFI_RESERVED_MEMORY_TYPE, false);
#endif
fb_dma_addr = gd->fb_base - CONFIG_SYS_SDRAM_BASE;
sunxi_display.fb_addr = gd->fb_base;
if (overscan_offset) {
fb_dma_addr += 0x1000 - (overscan_offset & 0xfff);
sunxi_display.fb_addr += (overscan_offset + 0xfff) & ~0xfff;
memset((void *)gd->fb_base, 0, sunxi_display.fb_size);
flush_cache(gd->fb_base, sunxi_display.fb_size);
}
sunxi_mode_set(mode, fb_dma_addr);
/*
* These are the only members of this structure that are used. All the
* others are driver specific. The pitch is stored in plnSizeX.
*/
graphic_device->frameAdrs = sunxi_display.fb_addr;
graphic_device->gdfIndex = GDF_32BIT_X888RGB;
graphic_device->gdfBytesPP = 4;
graphic_device->winSizeX = mode->xres - 2 * overscan_x;
graphic_device->winSizeY = mode->yres - 2 * overscan_y;
graphic_device->plnSizeX = mode->xres * graphic_device->gdfBytesPP;
return graphic_device;
}
/*
* Simplefb support.
*/
#if defined(CONFIG_OF_BOARD_SETUP) && defined(CONFIG_VIDEO_DT_SIMPLEFB)
int sunxi_simplefb_setup(void *blob)
{
static GraphicDevice *graphic_device = &sunxi_display.graphic_device;
int offset, ret;
u64 start, size;
const char *pipeline = NULL;
#ifdef CONFIG_MACH_SUN4I
#define PIPELINE_PREFIX "de_fe0-"
#else
#define PIPELINE_PREFIX
#endif
switch (sunxi_display.monitor) {
case sunxi_monitor_none:
return 0;
case sunxi_monitor_dvi:
case sunxi_monitor_hdmi:
pipeline = PIPELINE_PREFIX "de_be0-lcd0-hdmi";
break;
case sunxi_monitor_lcd:
pipeline = PIPELINE_PREFIX "de_be0-lcd0";
break;
case sunxi_monitor_vga:
#ifdef CONFIG_VIDEO_VGA
pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0";
#elif defined CONFIG_VIDEO_VGA_VIA_LCD
pipeline = PIPELINE_PREFIX "de_be0-lcd0";
#endif
break;
case sunxi_monitor_composite_pal:
case sunxi_monitor_composite_ntsc:
case sunxi_monitor_composite_pal_m:
case sunxi_monitor_composite_pal_nc:
pipeline = PIPELINE_PREFIX "de_be0-lcd0-tve0";
break;
}
offset = sunxi_simplefb_fdt_match(blob, pipeline);
if (offset < 0) {
eprintf("Cannot setup simplefb: node not found\n");
return 0; /* Keep older kernels working */
}
/*
* Do not report the framebuffer as free RAM to the OS, note we cannot
* use fdt_add_mem_rsv() here, because then it is still seen as RAM,
* and e.g. Linux refuses to iomap RAM on ARM, see:
* linux/arch/arm/mm/ioremap.c around line 301.
*/
start = gd->bd->bi_dram[0].start;
size = gd->bd->bi_dram[0].size - sunxi_display.fb_size;
ret = fdt_fixup_memory_banks(blob, &start, &size, 1);
if (ret) {
eprintf("Cannot setup simplefb: Error reserving memory\n");
return ret;
}
ret = fdt_setup_simplefb_node(blob, offset, sunxi_display.fb_addr,
graphic_device->winSizeX, graphic_device->winSizeY,
graphic_device->plnSizeX, "x8r8g8b8");
if (ret)
eprintf("Cannot setup simplefb: Error setting properties\n");
return ret;
}
#endif /* CONFIG_OF_BOARD_SETUP && CONFIG_VIDEO_DT_SIMPLEFB */
Reference in New Issue View Git Blame Copy Permalink