97 lines
		
	
	
		
			2.0 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
			
		
		
	
	
			97 lines
		
	
	
		
			2.0 KiB
		
	
	
	
		
			Plaintext
		
	
	
	
/dts-v1/;
 | 
						|
 | 
						|
/*
 | 
						|
 * (Bogus) example FIT image description file demonstrating the usage
 | 
						|
 * of multiple images loaded by the SPL.
 | 
						|
 * Several binaries will be loaded at their respective load addresses.
 | 
						|
 *
 | 
						|
 * For booting U-Boot, "firmware" is searched first. If not found, "loadables"
 | 
						|
 * is used to identify images to be loaded into memory. If falcon boot is
 | 
						|
 * enabled, "kernel" is searched first. If not found, it falls back to the
 | 
						|
 * same flow as booting U-Boot. Changing image type will result skipping
 | 
						|
 * specific image.
 | 
						|
 *
 | 
						|
 * Finally the one image specifying an entry point will be entered by the SPL.
 | 
						|
 */
 | 
						|
 | 
						|
/ {
 | 
						|
	description = "multiple firmware blobs and U-Boot, loaded by SPL";
 | 
						|
	#address-cells = <0x1>;
 | 
						|
 | 
						|
	images {
 | 
						|
 | 
						|
		uboot {
 | 
						|
			description = "U-Boot (64-bit)";
 | 
						|
			type = "standalone";
 | 
						|
			arch = "arm64";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x4a000000>;
 | 
						|
		};
 | 
						|
 | 
						|
		atf {
 | 
						|
			description = "ARM Trusted Firmware";
 | 
						|
			type = "firmware";
 | 
						|
			arch = "arm64";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x18000>;
 | 
						|
			entry = <0x18000>;
 | 
						|
		};
 | 
						|
 | 
						|
		mgmt-firmware {
 | 
						|
			description = "arisc management processor firmware";
 | 
						|
			type = "firmware";
 | 
						|
			arch = "or1k";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x40000>;
 | 
						|
		};
 | 
						|
 | 
						|
		fdt-1 {
 | 
						|
			description = "Pine64+ DT";
 | 
						|
			type = "flat_dt";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x4fa00000>;
 | 
						|
			arch = "arm64";
 | 
						|
		};
 | 
						|
 | 
						|
		fdt-2 {
 | 
						|
			description = "Pine64 DT";
 | 
						|
			type = "flat_dt";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x4fa00000>;
 | 
						|
			arch = "arm64";
 | 
						|
		};
 | 
						|
 | 
						|
		kernel {
 | 
						|
			description = "4.7-rc5 kernel";
 | 
						|
			type = "kernel";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x40080000>;
 | 
						|
			arch = "arm64";
 | 
						|
		};
 | 
						|
 | 
						|
		initrd {
 | 
						|
			description = "Debian installer initrd";
 | 
						|
			type = "ramdisk";
 | 
						|
			compression = "none";
 | 
						|
			load = <0x4fe00000>;
 | 
						|
			arch = "arm64";
 | 
						|
		};
 | 
						|
	};
 | 
						|
 | 
						|
	configurations {
 | 
						|
		default = "config-1";
 | 
						|
 | 
						|
		config-1 {
 | 
						|
			description = "sun50i-a64-pine64-plus";
 | 
						|
			loadables = "uboot", "atf", "kernel", "initrd";
 | 
						|
			fdt = "fdt-1";
 | 
						|
		};
 | 
						|
 | 
						|
		config-2 {
 | 
						|
			description = "sun50i-a64-pine64";
 | 
						|
			loadables = "uboot", "atf", "mgmt-firmware";
 | 
						|
			fdt = "fdt-2";
 | 
						|
		};
 | 
						|
	};
 | 
						|
};
 |